Village Panchayat Tender

Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead (a) Of area 3 sq.m and below.

Dismantling doors, windows and clearstory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead (b) Area beyond 3 sq.m.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4(1cement:4 coarse sand) in foundation and basement. + Extra for laterite masonry in all size in superstructure from floor I level upto floor V level.

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/Asian Paints/Sherwin Willians) on old work including cleaning the surface with water etc. complete.

6MM cement plaster to ceiling 1:3 (1 cement :3 fine sand)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923/Rectangular Hollow Section (RHS)IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA, VIZAG, JSW, APOLLO Steel Ltd.) make(Min Yeild Stress 310 Mpa) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the direction of the Engineer incharge.

Add for providing & fixing Flashings-[Corners, Ridges, valleys, gable end & Trims](Girth upto 610 mm) including all the accessories complete as per the direction of the Engineer in charge

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade

Centering & shuttering including strutting, propping & removal of forms for : (li) Vertical surfaces such as retaining walls, retur wals, partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses. Filets and the like

Providing & laying cement concrete 1:2:4(1 cement:2 coarse sand:4 graded granitic or basaltic stone aggrt. 20mm nominal size) excluding cost of centering, shuttering and finishing in: (b) In retaining walls, retrun walls (any thk) including attached pilasters, columns, piers, abutments, pillars posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc. upt floor five level.

Repairs to plaster inpatches of 2.5 sq.m and under including cutting the patch in proper shapsand preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping groud within 50m lead

Providing and fixing position S.S hand rail in main stair case, and landing as per approved design shownin the drawing including bending handrail pipe to proper shape in curves with special etc. complete

15mm cement plaster 1:4(1 cement:4finesand) on the rough side or half brick wall.

12mm cement plaster 1:4(1cement:4 fine sand)

Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repair to scratches etc complete

Applying one coat of cement primer of approved brand and manufacture on wall surface+Painting one or more coats of acryllic exterior paint of approved brand and manufacture (Such as Dulex/Asian Paints/Sherwim Willians) on old work including cleanig the surface with water etc. complete. From item No.19

Applying one coat of distemper primer of approved brand and manufacture on wall surface+Distempering (one/more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade. From Item no.19

Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. For Grills

Wood finish, wood core FRP (Fibre Reinforce Polymer) door shutter manufacture, supply and installation (including accessaries as mentioned below) of EPEEor equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned har wood, moisture less than 17% wooden style of Top rail and lock rails, FRP (Fiber Reinforced Polymer) laminate made up of 450grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin wih viscosity range of 400/450 centipoises per second (cps) and printed matt haveing wooden textures used along with UV Resistant resin to give clear texture on the door. The core of Shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid/alkali resistant manufactured using RV TIFAC (RV Engineering College, Bangalor & Technology Information Forecasting & Assessment Council ) technology in lin with IS 13034 1990 test Standard in an ISO 9001-2015 certified factory. Accessories: i)S.S Hinges 4"-3 Nos ii) S.SLatch-1 Nos iii) Tower Bolt 5"-2Nos iv) Handle 5"-2 Nos Shutter thickness: a)32mm

FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installtion (With Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber reinforced Plymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminated made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. the slot of frame for door resting will be of suitable width so as to take specified thickness door. the frame will be water proof as well s mid acid/alkali resistnat manufactured in an ISO 9001-2015 certified company. Specified Cross Section b)4"x2"

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge. Fixed windows/ventilators matching with 4.5mm series shutters. (b) Plain glass

Painting one or more coasts with superior quality ready mixed paint of wood work of approved brand & manufature in all shades on old work to give an even shade