Village Panchayat Tender

In beam, Suspended floors, roofs having slope upto 15” landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Cantering & shuttering including Strutting, Propping & removal of forms for :

Sides and soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels Plinth beams exceeding 1 m in depth

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Dismantling the tile work in work in floors and roofs laid in cement including stacking of materials within 50 mtrs lead for thickness of tiles 10mm to

Providing and laying vitrified floor tiles 600X1200mm size if Kajaria (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to I.S.15622of approval make in colours and shades as specified laid on 20mm thick cement mortar 1:4 (1cement :4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete.

Providing and fixing vitrified tiles in 600X1200mm size (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS:15622 of approved makes in colours and shade, in skrting , riser of steps and dados, jointing with grey cement slurry @ 3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.

FALSE CEILING:- Providing & fixing False Ceiling Yashashri make or equivalent, made out of 2” x 1’ M.S. sq tube frame support structure & 20mm x 155mm x 1.2mm multi –cavity upvc section 30mm x 40mm x 2mm upvc multi-cavity section with hidden screwing system. The average weight of False Ceiling is 8.50 kg per sq. Mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. For fixing required door fittings, all complete as per directions of Engineer (door handle, lock and stopper etc. To be paid separately)

PARTITION:- Providing & fixing Partitions Yashashri make or equivalent, made out of frame support structure in 2” x 1” M.S. sq tube & walls panelled by 20mm x 155mmx1.2mm Upvc multi cavity section fixed on structure with hidden screwing system. Door frame & shutter made out of 50mm x 50mm x 2.5mm & 31 mm x 1.5mm Upvc multi cavity section. Some portion of partition can be made by 4 mm fixed glass. The average weight of Partition is 17 kg per sq. mtr. These Upcv sections are tested by using BS 2782 & DIN 53459 test methods.

Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part – III). The Suspended System held with Spider Fitting of SS-316 Grade Steel of approved manufacturer with glass panel having 12mm thick clear toughened glass held together with SS-316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS-316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ mylon bushes and separators to prevent bi-mettallic contacts, all complete to perform as a specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T & P.scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixes nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of glazing including thickness of joints and the portion of Glass panel inside the SS Channel shall be measured.

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with MS flats square or round bars with round headed bolts and nuts or by screws

Plain grill

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18mm series shutters section.

Plain glass

Painting three or more coats with crylic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Supply & Fixing of Aluminium Plain Exterior Ventilated Façade of approved colour consisting of liniar roll formed panel 84mm wide x 16mm deepx 0.6 mm thick with round edges panel length upto 6 meter coil coated on a continuous paint line double baked and roll formed from enamelled corrosion Resistance Aluminium Alloy AA3005/AA3003 (Al. Mn.) for higher strength and good Roll forming characteristics. Panels shall be clipped at a distance of 146mm with a gap of 62mm between two panels to baked enamelled Aluminium panel stringers 33mm wide and 48 mm deep x 0.95 mm thick in a standard length of 5 mtrs made of double baked enamelled Aluminium Alloy AA5050 (Al. Mg.) white to hold the panel in a module of 86 mm centre to centre. The Prongs on stringers shall be to accommodate a gap of 62 mm between two panels as per enclosed profile details. Stringers shall be fixed at 150mm from panel ends and at a distance of less than 1000 mm center to center across the panel span based on the wind load criteria. The Stringer shall be fixed to suitable structure ( Other’s scope) by means of rigid fixing details. All properties and specifications shall comply with ECCA directives and more specially EN 1396:1996.

Paint Finish: Panel shall be stove enamelled and finished with standard color Natural TF Silver (7080) or Pure White (0260) or any other colour max. 10% quantity, a special three layered coating system (consisting of first a conversion layer of thickness 800-2000mg/sqmtr, a polyurenthane basecoat of 16 – 20 microns, and a special top coat of polymide particles of 8 – 12 microns thick to provide excellent abrasion and damage resistance) in a continuous coil coating process of the approved colour on the exposed side and the reverse side with epoxy . Complete including Wall, corner profiles as per manufacturers specifications etc. (MS substructure to be paid separately, Rate to include all ridge, eaves, valley & joints flashing, verge and junction trims, facia, etc. of similar finish, making cut outs for light fittings, diffusers, columns, etc. as required, complete as per approved shop drawings and as directed/approved by Engineer.)

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.

Second class Indian teak wood

Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows including anodized aluminium butt hinges with necessary screws.

Second class Indian teak wood

Providing 25mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size approved shade, colour and texture laid over 20mm thick base cement mortar 1.4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Complete at all levels. Granite of any colour and shade, area of slab over 0.050 sq.m.

Jet black

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. With coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sand withing between the platform top and bottom slabs complete.

Overall size 535 mm x 460mm (21’x18’) bowl size 460mm x 380mm x 200mm (18”x15”x8) depth 200 mm. Glossy. 1.0mm thk.