The Sports Authority Of Goa Tender

Melamine polishing on wood work (one or more coat) Matt

Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead.

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.

In R.S. joists, channels, angles, tees

In flats of all sizes

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Supply, installation & commissioning of water storage cooler cum purifier with storage facility of UV 120LPH, having Stainless steel body. Purifier should have three faucet one for Hot one chilled and normal purified water. (Make - Aquaguard Model no: PC 120PSS RO +UV Hot cold & normal or equivalent make)

Providing & fixing GI barbed wire (shall weigh 9.33 kg. per 100 meters minimum) over angle supports (forming Y with Angle of size 50X50X5 of TATA or equivalent make), size of Y- verticle member 20cm fixed on wall with plate with 4 anchor fastners per plate and two arms of Y of length 30cm) fixed at 2 m c/c fixed with GI staples or necessary fixture as directed by Engineer in charge. 3 run of barbed wire to be provided on each arms of Y and 2 run of barbed wire to be provided on verticle member at equi-distance such that total run of barbed wire will be 5) Finishing structural supports with 2 coat of primer and 2 or more coats of superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 20 mm outer dia CPVC pipe

Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Supply and fixing of HDPE net 2.5mm thick (80x80mm) on posts, with 10mm thick rope. The net has to be tied in proper alignment with no sag in the net. The quality of the net is to be approved by Engineer in charge.

Supplying and filling good earth (comprising of black garden earth) including screening through sieve of 7.5mm and spreading breaking of clods watering ramming compacting and rolling with 10 tones roller to give an leveling surface including transportation, loading, unloading, royalty charges and disposal of surplus rubbish materials beyond 1km as directed by the Engineer – in – charge.

Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead Area beyond 3 sq.m

THREE TRACK SLIDING WINDOWS:- Providing & fixing Three track Sliding Windows Yashashri make or equivalent, made out of 97mm x 43mm x 2mm upvc multi-cavity reinforced with G.I. channel and having up word projection for sliding of shutter on Nylon Rollers and having slope for draining rain water outside and welded in corners. Shutters are made out of 57mm x 31mm x 2mm multi-cavity section having provision for nylon rollers fixing, glass fixing with EPDM gasket, glass bead and welded in corners.In Three Track Sliding window 4mm clear glass is used. The average weight of Three Track Sliding window is 16.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Providing and fixing Pressmatic Taps - push type pillar tap (auto closing) 15mm of approved make like Jaguar or equivalent

Providing and fixing plastic seat with lid for pedestal type WC pan with CP brass hinges rubber buffers etc. complete White plastic seat with lid.

Deep cleaning of external façade of building with soap water or necessary cleaning agent and other required cleaning materials. Rate is inclusive of scaffolding

Supply of SELF SUPPORT EXTENSION LADDER (43 feet ht. i.e. 13 m) of “Idenver ladder” or equivalent make HEIGHT: 24 BY 43 WITH RING AND PLATFORM WITH EXCEL AND HANDLES. SIDE SUPPORT: C SECTION 3MM STEP SECTION: NON SLIP CORRUGATED TUBE ACCESSORIES: SAFETY EQUIPMENT FOR LOCKING, NYLON ROPE AND RUBBER PADS. Rate should be inclusive of transporatation at repesctive sports complexes, assembling if required, and showing demo on site

Supply of TELESCOPIC LADDER (IMPORTED LADDER) 12ft (3.60 m) ) of “Idenver ladder” or equivalent make. Rate should be inclusive of transporatation at repesctive sports complexes, assembling if required, and showing demo on site

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 450

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge

FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Specified Cross Section d) 5” x 2 ½ “

Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (RV Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Shutter Thickness : a) 30mm

Crack filler for plasters, IPS, cement sand screeds and non – structural cracks. Do Not open the cracks, Clean the cracks so as to free them from oil, dust, loose particles etc. Moisten the surface with water, Fill cracks with EPCO – ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling , allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalen.