Sports Authority Of India Tender

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size of make finolex/polycab/RR. 4 Core 4 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required (a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation the mud/hard soil/tar road etc in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required (b) In rocky strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 50 sq.mm

4 x 25 Sq. mm

4 x 95 Sq. mm.

4 x 4 Sq. mm.

Providing and fixing following capacity TPN disconnector fuse switch unit with HRC fuses including drilling holes in cubicle panel making connections etc as required (c) 100 A TPN, CAT B

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). In soily strata

Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt)

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) 4 way (4+12), double door, Horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required SP, Cat A

Supplying and fixing following rating three pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required 40 A, Cat A

Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm,Bottom-410 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 570 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, supply and fixing of lightning arrestor, supply and fixing aviation light. (The high-mast with serial number, factory inspection report/test report of high-mast should be provided) as per specifications on provided foundation J type stud/bolts with necessary High Mast of Make Valmont/ Transrail/ Bajaj as directed by the depatment. The high Mast carriage to be designed as per the Lighting Requirements for illumination toward the Football Playgeround.

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design submiited by the High Mast Manufacturer approved by the department with required steel, concrete etc.

Supplying and erecting integrated LED flood light fitting Min. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, having Beam Angle 30 deg to 90 deg, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty of make Lighting Technology/ Philips/Kasper T Net 1) Driver and luminaire shall be of same make. 2) LM79 and all other reports of all luminaires shall be from accredited NABL laboratory. 3) Manufacturer Logo shall be embossed on all pressure die cast luminaires and logo shall not be screen-print/sticker type. 4) All luminaires shall conform to respective IS. 5)There shall be provision for earth wire termination.

S.I.T.C. of cubicle outdoor panel , with canopy suitable to work on 440 v, 3 phase 4 wires and 50 Hz system. The panel should be free standing, dust and vermin proof, front compartmentalized Double Door,Outdoor type IP 65 & above, fabricated in 14/16 gauge CRCA sheet. The panel shall be powder coated with RAL 7032 colour after surface treatment with seven tank process. The cable entries shall be from bottom. distribution Bus bar copper of size minimum 25x5 mm for phases and neutral with colour coded heat shrinking insulating sleeves as per actual site Load, interconnecting wiring etc. complete. The panel should be mounted suitably as required by engineer in charge along with termination and neat dressing of all cable with lugs and glands with transferring the load as per required size of cable , including Cleaning and clearing of the total area where in work is in progress. The panel will incorporate the following as directed by engineer Incharge also should fix the provided Energy Meter in the panel on site as per required wirring etc including carriin g out required departmental procedures from Electicity department etc. of make Infinity Electricals/ Nanu Electricals/ DB Electricals/ Precision Tech MAIN INCOMER:i) 100 AMPS TP MCCB Microprocessor based of make L&T with rotary handle – 1.00 no. ii) Phase indicating lamp,240VAC, LED type- 6.00 Nos. iii) Voltmeter 0-500 Volt……1 Nos OUTGOING FEEDERS:1) 200 Amps 4 Pole Manual Changeover…..1Nos ii) TP MCCB 40 AMPS……..6 NOS iii) TPN MCB 40 Amps …4Nos iv) S.P.MCB 6-32Amps of make Legrand/Hager/L&T - 4 Nos. iii) Timer and contator for Auto operation of Track Lights………..1 set

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty of make Philips/Kaper T Net/Lighting Technology

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.of make Philips/Kasper T Net/Lighting Technology

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat A

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty of make Philips/Kasper T Net/Lighting Technology

Supplying and erecting integrated LED flood light fitting 100W IP65 & above with IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket to be mounted with 3 Years warranty of make Philips/Kasper T Net/Lighting Technology

Supplying & erecting Water proof Junction box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall/truss with Supply and fixing of connector for 4 core 4 Sq.mm Cable and fixing provided SP MCB of make Hensel or equivalent as directed by Engineer incharge.

Supply of Sound Projector PROVISIONAL Low impedance 8 Ω PA loudspeaker with 100 V line transformer.Polypropylene woofer protected by an aluminium mesh grille. Solid and compact structure.Prepared for outdoor use, waterproof and rustproof materials of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of Amp for SPK FEATURES: Professional stereo power amplifier. POWER: Stereo and parallel mode: 450 + 450 W RMS@8 Ω675 + 675 W RMS@4 Ω 880 + 880 W RMS@2 Ω of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of DSP 4 In 8 out DSP Audio Processor of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of Subwoofer High output SPL and sensitivity2 x 18” high power low frequency transducer with 100mm voice coil2 x NL4 connectorsSensitivity 97dB, max SPL 124dB Passive configurationRMS 2,000W, peak 4000W of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of Amp for SUB Operating and power modes: Stereo and parallel up to 1,000 + 1,000 RMS@2 ΩBridge mode up to 1.750 W RMS@4 Ω of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of PA Mixer Professional 12-channel mixer with 2 outputs and independent volume controls.USB audio input/output for PC connection as an audio card, allows simultaneous PC audio playback and recording.Bluetooth receiver.USB recorder/player

Supply of Wireless MIC Dual wireless hand-held microphone with unidirectional dynamic capsule. Receiver with colour display of information; transmission channel, battery level in microphone, etc. Radio frequency signal and audio signal indicator of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of SPK Cable 2 core 16AWG/1.5mm^2 150m Spool Install Speaker Cable (CL3 Rated) 2[(65/0.16OFC+PVC)*2C+ Paper+ Ripcord+PVC]*1C OD:5.3mm shielded cable of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.(90 mts. Bundal)

Supply of Interconnect cable [(20/0.15OFC+PE)*2C+Cotton yarn +AL+B16/8/0.10OFC,10 rossing, PVC]*1C 50m/spool of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of XLR Connector Blue Industry Quality XLR Connector (Female/male ) as required of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.

Supply of Speakon Connector Blue Industry Quality Speakon Connector

Installation, Testing, Calibration and commissioning of the Sound control system with fixing of speaker with the help of hook or GI box type frame complete of make Fonestar/Bose/ Kasper/Audac as directed by engineer incharge.