Sewage And Infrastructure Development Corporation Of Goa Limited Tender
View complete overview of Goa SIDCGL Tender
Costs
EMD
₹ 3,93,799Document Cost
₹ 8,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SIDCG_15242_1Bid Award Id
ViewTender No
SIDCL/Admn-7/F.No.TN-30/ 1566/ 23-24 Dt08/03/2024Ln3Tender Authority
Sewage And Infrastructure Development Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lift 3.0-4.5 m
49.77
19858
399
... More
Lift 4.5-6.0 m
29.45
12870
437
... More
Lift 6.0-7.5 m
29.45
13989
475
... More
Lift 7.5-9.0 m
29.45
15109
513
... More
Lift 9.0-10.5 m
29.45
16228
551
... More
Earthwork in excavation over areas in saturated soil (exceeding 0.30 m depth up to a depth of 0.60 m) including disposal of excavated earth,upto a lift of 1.5 m & within a lead of 50m to be neatly dressed leveled, as directed by the Departmental Officer.excluding planking, timbering in trenches and dewatering.
9.91
7989
806
... More
Closed planking in trenches including strutting and shoring, packing cavities (wherever required) complete for sewerage works in saturated soil strata.
-
-
-
... More
For works of depth upto to 3.00 m
9.91
8276
835
... More
Dewatering the excavated trenches and pools of water including removal of slush, mud etc in the building trenches /pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.
3000
267000
89
... More
Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10 kilometres distance having continuous agitated mixer, manufactured as per the mix design of M- 15( by using 325kg of cement per cu.m of concrete in Ground level reservoir) including the cost of pumping the R.M.C from transit mixer to the site of laying, including the cost of centering shuttering for plain cement concrete work, complete in all respects in Ground level reservoir as per the direction of the Engineer-in-chargeAll works upto plinth level
29.73
270748
9107
... More
Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10 kilometres distance having continuous agitated mixer, manufactured as per the mix design, including the cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability in M- 30 grade of concrete with 420 kg of cement per cu.m of concrete, for reinforced cement concrete work including the cost of pumping the R.M.C from transit mixer to the site of laying excluding the cost of reinforcement ,including the cost of centering shuttering for R.C.C work, including Plastering in cement mortar of 1:3 in 12mm thickness with water proofing compound with a neat finishing floating coat of cement for internal R.C.C surfaces of bottom slab complete in all respects as per the direction of the Engineer -in -charge in Ground level reservoir/Underground reservoir.
41.35
476275
11518
... More
Providing and laying in position (1:1 1/2:3)reinforced cement concrete excluding the cost of centering ,shuttering ,finishing and reinforcement (1 cement:1 1/2 coarse sand:3 graded stone agg 20mm nominal size)
-
-
-
... More
In walls (any thickness) including attached pilasters, buttresses, plinth and string, courses, fillets, column, pillars, piers, abutments, posts and structs etc upto floor five level
52.85
424614
8034
... More
In beams, suspended floors, roofs having slope upto 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
8.39
68023
8109
... More
Providing TMT steel reinforcement(confirming to IS 1786 of 1986) for RCC work (confirming to IS 1786 OF 1986) including bending,binding and placing in position in all the floors along with the factory made precast concrete cover block of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
13490.49
1416501
105
... More
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates
-
-
-
... More
PCC
8.22
3343
407
... More
Raft
5.83
2371
407
... More
Vertical wall
489.07
234266
479
... More
Floor Slab
17.27
13903
805
... More
12mm cement plaster 1:3 (1 cement : 3 fine sand)
533.51
126975
238
... More
Manufacturing with QAP & fabrication of MS cover - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177
2.11
155838
73937
... More
Supply of D.I manhole cover and frame as per EN-124 standards at the site of work. Size - 600mm x 600mm Class C - 250 Grade - HD Weight - 90Kg
2
24774
12387
... More
Providing and fixing C.I. footrest having minimum weight 5.3 kgs in manhole with 20 x 20 x 10 cm cement concrete blocks 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) as per standard design.
27
23517
871
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). 80 mm nominal bore
47.8
29779
623
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. In tees, angles, flats and channels
2.45
31906
13023
... More
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make ) but excluding the cost of purlins, rafters, trusses, flashings etc.complete as per the directions of the Engineer in charge.s.
22.26
14538
653
... More
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth above 610mm) including all the accessories complete as per the directions of the Engineer in charge
8
6192
774
... More
G.I. sheet gutters 26 s.w.g. semi circular 15cmwidth and 45 cm overall including fixing with clamps & making connection with rain waterpipe complete.
16
5520
345
... More
Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 14333-1996 & made from PE 100 resin Class IV (10kg/cm2) normal Diameter in mm HDPE PIPES- Outer dia. 180 mm
700
1095500
1565
... More
Jointing of H.D.P.E pipe by heating to the end of pipes with the help of tefflon coated electric mirror /heater to the required tempreture & then pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process . the pressing may be required to be done with jacks/ Hydraulic jack/ Butt fusion machin etc. complete with all materials , labours as directed by engineer incharge. HDPE PIPES- Outer dia. 180 mm
117
21879
187
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel double flanged manually operated sluice valves having body, door, bonnet stuffing box, hand wheel etc. in graded cast iron i.e. ASTM A-216 Gr WCB. inside screw non rising type stainless steel AISI 410 spindle. Spindle Nut and four faces of gun metal as IS:318 Gr. 2 LTB. Valve conform to IS:14846 - 2000 and flanges faced and drilled to IS:1538 part 4 & 6. Valve sizes 400 mm and above will be provided with ball thrust bearing and gear box. Valves are to be tested in different test pressure rating: Class 150 (Class A) 200 mm Dia. Sluice Valve
2
169832
84916
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel Kinetic double acting Air Valves having body, small & large orifice covers as per ASTM A- 216 Gr. WCB. Valve conforming to IS :14845/2000. Isolating sluice valve as per IS: 14846. Low pressure chamber (Large orifice) contains vulcanite covered aluminium ball seats on moulded synthetic rubber ring, high pressure chamber with rubber covered aluminium ball seats on small orifice plug of H.T. Brass. Flanges drilled to IS: 1538 PART 4 & 6. Valves are to be tested in different test pressure rating: Body : 30 Kg/cm2, Seat :20 Kg/cm2, Class 150 (class B)
-
-
-
... More
150 mm Dia. Air Valve
1
150684
150684
... More
100 mm Dia. Air Valve
1
70677
70677
... More
50 mm Dia. Air Valve
2
76520
38260
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Steel Reflux valves conforming IS:5312 part-I. Valves double flanged ends without bypass arrangement bearing ISI Certificate mark Class - 300 (52/78 kg/cm2) (Class A) 200 mm Dia. Reflux Valve
2
303398
151699
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.Murrum available @ site
2.12
520
245
... More
Installation of HDPE/PE product pipe by HDD method including preparing and setting up the plant and equipment, making string of new pipe-work material, installing new pipe string and making the system ready for commissioning by HDD operation except sewer line and pipe pressure mains installation. Including, all related civil and mechanical works like excavation, shoring/ strutting, etc. drilling, stringing, reaming, and pulling back the new pipe-work on the designed bore path alignment, proper disposal of drilling fluid and back fill after completion all inclusive as per lndSTT: 101-2018: Code of Practice for Horizontal Directional Drilling Technique suiting Indian Conditions. HDPE PIPES- Outer dia. 180 mm
700
2065000
2950
... More
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I 200 mm Dia. Sluice Valve
4
3476
869
... More
Lowering and fixing kinetic air valve of following dia in proper position and alignment as directed including cost of conveyance from store to site of work, all jointing material, labour and hydraulic testing etc. complete.
-
-
-
... More
150 mm Dia. Air Valve
1
1028
1028
... More
100 mm Dia. Air Valve
1
849
849
... More
50 mm Dia. Air Valve
2
706
353
... More
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I
-
-
-
... More
200 mm Dia. Reflux Valve
2
1738
869
... More
150 mm Dia. Reflux Valve
4
2072
518
... More
Construction of masonry chamber 120x120x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar1:4 ( 1 cement : 4 coarse sand) for sluice valve size beyond 200mm dia with necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour and as per details below) with C.I. cover and frame 600mm x600mm weighing not less than 250 kgs in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size)
-
-
-
... More
Clear Size 1.20 x1.20 x1.0 M.
2
76546
38273
... More
Clear Size 90 x90 x100 CM.
4
131440
32860
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
29.74
7285
245
... More
Hydraulic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment, a to the required test pressure by providing all work force, materials, reciprocating pump, pressure gauge,including the cost of water required, maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing, as per the standards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For PVC/HDPE pipeline HDPE PIPES- Outer dia. 180 mm
700
10500
15
... More
Providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification.R.S. angle 100 x 100 x 8 mm, MS plate 250 x 10 mm
0.4
57124
142810
... More
Sinking of 6 m external diameter well (other than pneumatic method of sinking ) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level.
-
-
-
... More
upto 3.0 m soil
3
10095
3365
... More
Beyond 3.0 m to 10.0 m depth
6.74
31111
4616
... More
Close timbering in case of shafts wells, cesspits, manholes, and the like including strutting, shoring and packing cavities (wherever required) complete. (measurements to be taken of face area timbered), Beyond 3 m
35.6
14667
412
... More
Providing & fixing P.V.C. water stopper 150mm wide and 6mm thick corrugated with centre bulb for insertion for construction joints in R.C.C. works complete in all respects as per the direction of the engineer in charge.
75.36
52525
697
... More
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.In R.S. joists, channels, angles, tees
3.74
51269
13711
... More
Providing and fixing in position habd rail in balconies landing and the like with 2" dia GI pipe resting 20x20mm MS square bars of clear height making necessary holdfast fixture (20mm square bars 15cm long) embeded in blacony concrete for resting the MS vertical square bars with holding ect as required (measurements will be made along the length of the hand rail), G.I. pipe Railing
11
12804
1164
... More
Providing and fixing M.S.chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size )including welding ,cuting and fabricating the plates to the required square or rounding shape ,making holes in the plate ,including providing and applying 3 coats of anticorrosive paint,etc. complete as directed by Engineer -in -charge , 8 mm thick
8
51112
6389
... More
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia. M.S.bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved ,welding,anchoring and applying 3 coats of anticorrosive paint ,etc.complete as directed by Engineer-in-charge.
26.13
39004
1493
... More
Sewage Pumps -Supplying Non-clog Submersible Pump suitable for sewage/Liquid waste application with standard MOC and given duty points as below Liquid Sp. Gravity : 1.05 Motor : High efficiency class IE 3 as three-phase asynchronous motor as per DIN EN ISO 60034 / BEE – minimum 3 star rated. Motor Protection Type : IP-68, Insulation Class : H, Shaft Sealing : Double Mechanical seal Power Supply : 415 V (±10%) / 50(±5%) / 3 Phase Including chain & guide rail ( 10 Mtr) , auto coupling.Pump - 1 DWF (5-7.5 HP) Flow 0.75 ML/ 9.5 LPS, . Head 13.1 M
4
1021586
255396.6
... More
Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. welded Ductile Iron double flanged pipes - PN16 horizontally cast conforming to IS: 1537-1960 in Class K-9.Barrel Length of 2.5 metres
-
-
-
... More
150 mm
18
204354
11353
... More
200 mm
5
75660
15132
... More
Sluice Valve : - Providing and supplying, Lowering, laying and jointing in position at site of Providing double flange sluice valve
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 200Min., four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A) 150 Mm
4
136304
34076
... More
Non-Return valve : - Providing and supplying, Lowering, laying and jointing in position Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A) 150 mm
4
91736
22934
... More
Air Valve - Providing and supplying, Lowering, laying and fixing Kinetic Double Orifice type Air Valves
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valveas per fig DS1 withinbuilt isolating valve smallwith SS spindle and CI protective cap confirming to IS1 4845/2000 (with latest amendments).Low pressure large orifice chamber with vulcanite coated timber ball resting on moulded rubber seating and chamber having CI cowl protection.High pressure chamber shall have rubber coated timber ball as float having Float guides; and LTB or SS orifice nipple The body seat ring shall be of LTB as per IS 318 LTB2 or of SS. All nuts /bolts shall be of carbon steel of SS. The flange shall be drilled and faced ,as per IS1538(part 4 &6) suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B)- 40mm
1
15986
15986
... More
Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985.
-
-
-
... More
80 mm
5
735
147
... More
150 mm
5
1155
231
... More
200 mm
3
996
332
... More
Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size
and thickness with both side machined.
100
17400
174
... More
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia. 150 mm
8
87432
10929
... More
Desigin, supply, Installing, Testing & Commissioning Mechanical Coarse Screen ( Multi Rake type) Screen shall be provided in screen channel. The mechanical screen shall be CHANNEL WIDTH:850mm depth:8900MM,swd:1000mm, bar spacing:20 mm, Bar Size-10mmx thick x50 mm deep flat bars, angle of inclination:75 deg to horizontal moc of screen:ss 304, peak flow per screen:0.75 MLD, vertical discharge height for accomodating conveyor :750 mm- including control panel
1
1831375
1831375
... More
Designing , supply, Installing, Testing & Commissioning Conveyor belt.B911 BC-600W, Range 2100-3000 Belt Conevyer of size 600 mm wide x2.5 m (c-c distance ) as per standard design.
1
273125
273125
... More
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts
and nuts complete. (cost of wooden box is included) (for pumps).
5
25055
5011
... More
Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
1000
645000
645
... More
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per
specification no. CB-LT/AL
400
57600
144
... More
Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected
with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per
specification no. CB-LT/AL
250
44750
179
... More
Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per
specification no. CB-LT/CU
100
11800
118
... More
Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places
as per specification No: WG-MA/BW
80
6880
86
... More
1.1 KV, Heat Shrinkable straight through joints Kit with lugs (RAYCHEM/3M) 3 1/2 x
70 - 150 sq. mm.
2
9148
4574
... More
600 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm
with rungs at 250mm c/c.(10SWG)
50
73100
1462
... More
150 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm
with rungs at 250mm c/c.(14SWG)
60
42360
706
... More
Bends for 150 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
4
5088
1272
... More
Bends for 600 mm width X 100 mm depth with runner size25x100x25mm, rung size 20x40x20mm with rungs at 250mm c/c.(10SWG)
4
10520
2630
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable
below ground/road surface, to required depth complete.
100
33700
337
... More
Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
10
5690
569
... More
Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 400A, 4 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no. SW-SWR/MCCBPB. (Excluding MCCBs)
1
47256
47256
... More
Supplying and erecting Three phase smart energy meter DLMS compliancewith 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 withbacklit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day,
week, month & with communication module configurable for GSM/Wi-Fi,IrDA/Bluetooth, complete provided panel with calibration certificate frommanufacturer & duly wired with required size of PVC wires.
1
19539
19539
... More
Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber
/ in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB
10
12370
1237
... More
Supplying and erecting bus bar chamber triple pole with neutral with four copper
bars, 500V 200A having 20mm (Width) X 2 mm (Thickness), with 99.9 % Copper
purity as per E91E Grade & Current Density 1.6 A per sq. mm. compliance to IS 5082
and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable
number of ways and with SMC/DMC Insulators and accessories of suitable rating
complete as per specification no. CP-BB
1
10376
10376
... More
Supplying and erecting 35 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP- ED/APFC
1
200263
200263
... More
Providing & erecting MCCB, 4 Pole, Adjustable type, 35 KA/40KA, 100 A-CAT A
2
25300
12650
... More
Supplying, erecting & marking TPMCB 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB
4
10880
2720
... More
Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breakingcapacity (Icn) 10kA in provided distribution board as per specification no. SW SWR/MCB
2
3586
1793
... More
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no.
SW-SWR/MCB
2
672
336
... More
Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set
of 8)
3
960
320
... More
Supplying and erecting LT current transformer with bar primary 50/5 to1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured withinsulating materials connected to the meter with test certificates.
16
16432
1027
... More
Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring &
connections etc.
30
7440
248
... More
Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250
V on provided box / panel with necessary material, wiring & connections etc.
10
3540
354
... More
Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phaseAC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary
PVC wire leads and lugs
8
2672
334
... More
Supplying and erecting extended rotary handle for MCCB with adjustable telescopic
rod suitable for above 250A upto 630 MCCB complete.
5
9330
1866
... More
Supplying and erecting extended rotary handle for MCCB with adjustable telescopic
rod suitable for up to 250A MCCB.
4
5020
1255
... More
Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral as per specification no. CP-SPD.
1
8275
8275
... More
Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB‟s on iron/ GI frame as per specification no. SW-SWR/MCBDB
1
1495
1495
... More
Providing, erecting and commissioning 2 pole RCCB only of electro-magnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per
specification no. SWRCCB/RCCB
1
4077
4077
... More
Motor Protection Relay - Providing, installing in panel EMPR for protection like
overload, phase failure, locked rotor, phase reversal with trip indication and adjustable over current function, DIN rail mounted.
5
54560
10912
... More
Supplying and erecting Iron work consisting of Various sections of MS and includingPlates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other
purposes complete with bending, cutting, drilling and welding complete erected atthe position with necessary materials duly painted with one coat of red oxide and
two coats of enamel paint to match the switchgears or as per directions by the authority.
200
37200
186
... More
Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as complete
150
37350
249
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other
purpose).
5
17175
3435
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm
thickness upto 3.3 kV.
6
30786
5131
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
8
110440
13805
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (a) In soily strata( Masonry chamber not included)
5
37035
7407
... More
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete
2
19804
9902
... More
Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the
authority
200
29400
147
... More
Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
4
32608
8152
... More
Providing & erecting 7 m high (clear height) galvanised octagonal pole withfoundation bolts having bottom of 130 mm A/F, top 70 mm A/F on
providedfoundation as per specification no. OH-PL/OPL
4
68376
17094
... More
Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC
4
6720
1680
... More
Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete.
(above 6 m to 9 m poles)
4
8132
2033
... More
Supplying & erecting mains with 3x2.5 Sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per
specification No: WGMA/BW.
50
4650
93
... More
Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per
specification No: WG-PW/SW
12
10272
856
... More
Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E- 27
base.
5
1945
389
... More
Supplying and erecting rectangular shaped LED Panel Light(1200mm X 300mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 4200 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
5
14620
2924
... More
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 62.5 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C
supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours,
along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001
with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 11.3 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite
Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 150 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
1
661755
661755
... More
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 50 kVA up to 62.5 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per
specification no. GEN-AMF.
1
91079
91079
... More
Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 200A, 50 Hz with enclosure, flexibility of neutral connection, line and loadreversibility,
changeover with phase barriers, source separator, terminal coversalong with
staggered termination for cable connection and ATS controller withprovision of time
delay protection of OV, UV, phase sequence changing, singlephasing and event
logging, connected with provided leads complete complying toIS/IEC 60947-3 Part 1/6 .
1
61155
61155
... More
Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection.Control Panel should offer single phasing, phase reversal, phase imbalance etc .
4
24252
6063
... More
Providing , erecting and commissioning single girder Electrically operated rectangular over head travelling crane Capacity 5 Ton, with 6 m to 8 m lift complete with rpoe hoist class II duty ,all three motions electrically operated by suitable rating motor, IP 54 ,control panel and down pendant control block........ 3 Ton, above 8 m to 10 m Span
1
776817
776817
... More
Providing, erecting and fixing square bar of 50 x 50 mm EN 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate
and "J" bolts.
20
44620
2231
... More
Providing, erecting Electric Valve Actuator for non rising spindle type sluice valve ofPN 1 & PN 1.6 rating, totally enclosed, weather-proof and dust proof construction
with IP-67, protection class suitable for installation in any position withoutlubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis engage on restoration of power to motor and with 10 watt single phase space
heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches withS.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction 150 mm
2
177818
88909
... More
Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED
Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED
5
183170
36634
... More
Designing, Supplying, Installing, commissioning & testing of Ultrasonic
Raddar type level transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement. Output-4-20 mA Power supply - 24V DC ext. Display - 4" LED Range- 0 to 30 mtrs
Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 67
Mounting - On PLC panel
1
68908
68908
... More
Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM (with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications. 300 mm Nominal Diameter Flowmeter.
1
217710
217710
... More
Supplying, erecting, testing & commissioning 11 kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 1 no. feeder with 1 VCB. compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA
1
513954
513954
... More
Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.
1
164659
164659
... More
Supplying, installing, testing and commissioning 11 kV 630A, vacuum circuit breaker with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS /VCB
1
547250
547250
... More
Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 63 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound, without gas cushioning ,hermetically Sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not ℃ by thermometer in oil and 45℃ by the resistance method inwindingat full load rating, using type A winding insulation (kraft paper), with HV tapping (with off load tap changer) off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 340 Watts at 50% load, 1140 Watts at 100% load as per IS:1180 (part 1) : 2014, with necessary
permissions of Electrical Inspector, as per specification no SS- TR-SL
1
185217
185217
... More
Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC
foundation and painted complete as per specification no SS-AS/FSG.
16
109712
6857
... More
Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete
as per specification no SS-AS/DLD.
1
19632
19632
... More
Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and
250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.
1
14302
14302
... More
Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)
2
4354
2177
... More
Supplying & errecting distribution class 11KV thyrite type lightining arrester with nut bolts, on provided MS channel as per specfication no. OH-INS/LA
1
1223
1223
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth
with required quantity complete, and recording the results Specification no. EA-MOBI
9
124245
13805
... More
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).(a) In soily strata( Masonry chamber not included)
4
29628
7407
... More
Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT Note - Length of cable depends on source of power supply given by state electricity board
600
528600
881
... More
Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3 x 120 to 185 sq. mm. with necessary material as per specification
no. CB-JT/HT
2
33948
16974
... More
Providing and erecting Heat shrinkable outdoor termination kit for11 KV, Indoor Heat Shrinkable Termination Kit with lugs, 3 x 240 - 300 sq. mm. with necessary material as per specification
no. CB-JT/HT
2
45300
22650
... More
Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV
( E ) XLPE HT cable 3 x 120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
2
102996
51498
... More
LADDER TYPE TRAYS( 100mm deep) 600 mm width X 100 mm depth with runner size 25x100x25mm, rung size
20x40x20mm with rungs at 250mm c/c.(14SWG)
50
73100
1462
... More
Bends for 600 mm width X 100 mm depth with runner size25x100x25mm, rung size
20x40x20mm with rungs at 250mm c/c.(10SWG)
4
8252
2063
... More
Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
10
5690
569
... More
Supplying & laying (including excavation) half round reinforced cement concrete
pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and
slope including providing and fixing collars in cement mortar 1:2 and curing etc.
complete.
100
54500
545
... More
O & M of pumping station including man power, necessary preventive maintenance , maintaining the O & M schedule, , follow up with the respective agencies and maintaining the sufficient inventory.
-
-
-
... More
For 1st Year after satisfactory comissioning
12
926280
77190
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements