Sewage And Infrastructure Development Corporation Of Goa Limited Tender
View complete overview of Goa SIDCGL Tender
Costs
EMD
₹ 6,50,135Document Cost
₹ 20,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SIDCG_18339_1Bid Award Id
ViewTender No
SIDCL/Admn-7/F.No.TN-08/ 990/ 24-25 Dt 11/11/2024 Ln1Tender Authority
Sewage And Infrastructure Development Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Price Schedule for Pumping Station 8 and mainsfor Uddir and Orulem in Vasco Const
BOQ Items
... More
Lift 3.0-4.5 m
66.43
399
26505.53
... More
Lift 4.5-6.0 m
52.88
437
23110.71
... More
Lift 6.0-7.5 m
52.88
475
25120.33
... More
Lift 7.5-9.0 m
19.39
513
9947.65
... More
Lift 9.0-10.5 m
17.63
551
9713.19
... More
Earthwork in excavation over areas in saturated soil (exceeding 0.30 m depth up to a depth of 0.60 m) including disposal of excavated earth,upto a lift of 1.5 m & within a lead of 50m to be neatly dressed leveled, as directed by the Departmental Officer , excluding planking, timbering in trenches and dewatering.
11.56
806
9320.58
... More
Closed planking in trenches including strutting and shoring, packing cavities (wherever required) complete for sewerage works in saturated soil strata…………
-
-
-
... More
For works of depth upto to 3.00 m
11.56
835
9655.94
... More
Dewatering the excavated trenches and pools of water including removal of slush, mud etc in the building trenches /pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.
4800
89
427200
... More
Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10 kilometres distance having continuous agitated mixer, manufactured as per the mix design of M- 15( by using 325kg of cement per cu.m of concrete in Ground level reservoir) including the cost of pumping the R.M.C from transit mixer to the site of laying, including the cost of centering shuttering for plain cement concrete work, complete in all respects in Ground level reservoir as per the direction of the Engineer-in-charge.All works upto plinth level
91.39
9173
838284.51
... More
Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10 kilometres distance having continuous agitated mixer, manufactured as per the mix design, including the cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability in M- 30 grade of concrete with 420 kg of cement per cu.m of concrete, for reinforced cement concrete work including the cost of pumping the R.M.C from transit mixer to the site of laying excluding the cost of reinforcement ,including the cost of centering shuttering for R.C.C work, including Plastering in cement mortar of 1:3 in 12mm thickness with water proofing compound with a neat finishing floating coat of cement for internal R.C.C surfaces of bottom slab complete in all respects as per the direction of the Engineer -in -charge in Ground level reservoir/Underground reservoir.
106.02
11518
1221107.58
... More
Providing and laying in position (1:1 1/2:3)reinforced cement concrete excluding the cost of centering ,shuttering ,finishing and reinforcement (1 cement:1 1/2 coarse sand:3 graded stone agg 20mm nominal size)
-
-
-
... More
In walls (any thickness) including attached pilasters, buttresses, plinth and string, courses, fillets, column, pillars, piers, abutments, posts and structs etc upto floor five level
76.9
8034
617782.9
... More
In beams, suspended floors, roofs having slope upto 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
17.06
8109
138303
... More
Providing TMT steel reinforcement(confirming to IS 1786 of 1986) for RCC work (confirming to IS 1786 OF 1986) including bending,binding and placing in position in all the floors along with the factory made precast concrete cover block of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
16274.59
105
1708832.11
... More
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates
-
-
-
... More
PCC
110.45
407
44952.74
... More
Raft
12.09
407
4920.75
... More
Vertical wall
2565.92
479
1229076.98
... More
Floor Slab
49.14
805
39561.56
... More
12mm cement plaster 1:3 (1 cement : 3 fine sand)
852
238
202774.89
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
475.73
208
98951.84
... More
Manufacturing with QAP & fabrication of MS cover - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177
2.11
73937
155838.86
... More
Supply of D.I manhole cover and frame as per EN-124 standards at the site of work. Size - 600mm x 600mm Class C - 250 Grade - HD Weight - 90Kg
2
12387
24774
... More
Providing and fixing C.I. footrest having minimum weight 5.3 kgs in manhole with 20 x 20 x 10 cm cement concrete blocks 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) as per standard design.
27
871
23517
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). 80 mm nominal bore
47.8
623
29779.4
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. In tees, angles, flats and channels
2.29
13023
29800.52
... More
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make ) but excluding the cost of purlins, rafters, trusses, flashings etc.complete as per the directions of the Engineer in charge.s.
22.26
653
14538.39
... More
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth above 610mm) including all the accessories complete as per the directions of the Engineer in charge
8
653
5224
... More
G.I. sheet gutters 26 s.w.g. semi circular 15cmwidth and 45 cm overall including fixing with clamps & making connection with rain waterpipe complete.
16
345
5520
... More
Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 14333-1996 & made from PE 100 resin Class IV (10 kg/cm2) normal Diameter in mm HDPE PIPES- Outer dia. 250 mm
700
3012
2108400
... More
Jointing of H.D.P.E pipe by heating to the end of pipes with the help of tefflon coated electric mirror /heater to the required tempreture & then pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process . the pressing may be required to be done with jacks/ Hydraulic jack/ Butt fusion machin etc. complete with all materials , labours as directed by engineer incharge. HDPE PIPES- Outer dia. 250 mm
117
174
20358
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel double flanged manually operated sluice valves having body, door, bonnet stuffing box, hand wheel etc. in graded cast iron i.e. ASTM A-216 Gr WCB. inside screw non rising type stainless steel AISI 410 spindle. Spindle Nut and four faces of gun metal as IS:318 Gr. 2 LTB. Valve conform to IS:14846 - 2000 and flanges faced and drilled to IS:1538 part 4 & 6. Valve sizes 400 mm and above will be provided with ball thrust bearing and gear box. Valves are to be tested in different test pressure rating: Class 150 (Class A) 250 mm Dia. Sluice Valve
2
118316
236632
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel Kinetic double acting Air Valves having body, small & large orifice covers as per ASTM A- 216 Gr. WCB. Valve conforming to IS :14845/2000. Isolating sluice valve as per IS: 14846. Low pressure chamber (Large orifice) contains vulcanite covered aluminium ball seats on moulded synthetic rubber ring, high pressure chamber with rubber covered aluminium ball seats on small orifice plug of H.T. Brass. Flanges drilled to IS: 1538 PART 4 & 6. Valves are to be tested in different test pressure rating: Body : 30 Kg/cm2, Seat :20 Kg/cm2, Class 150 (class B)
-
-
-
... More
150 mm Dia. Air Valve
1
150684
150684
... More
100 mm Dia. Air Valve
1
70677
70677
... More
80 mm Dia. Air Valve
2
46555
93110
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Steel Reflux valves conforming IS:5312 part-I. Valves double flanged ends without bypass arrangement bearing ISI Certificate mark Class - 300 (52/78 kg/cm2) (Class A) . 250 mm Dia. Reflux Valve
2
252832
505664
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.Murrum available @ site
18.34
245
4492.81
... More
Installation of HDPE/PE product pipe by HDD method including preparing and setting up the plant and equipment, making string of new pipe-work material, installing new pipe string and making the system ready for commissioning by HDD operation except sewer line and pipe pressure mains installation. Including, all related civil and mechanical works like excavation, shoring/ strutting, etc. drilling, stringing, reaming, and pulling back the new pipe-work on the designed bore path alignment, proper disposal of drilling fluid and back fill after completion all inclusive as per lndSTT: 101-2018: Code of Practice for Horizontal Directional Drilling Technique suiting Indian Conditions. HDPE PIPES- Outer dia. 250 mm
700
5700
3990000
... More
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I..... 250 mm Dia. Sluice Valve
2
1286
2572
... More
Lowering and fixing kinetic air valve of following dia in proper position and alignment as directed including cost of conveyance from store to site of work, all jointing material, labour and hydraulic testing etc. complete.
-
-
-
... More
150 mm Dia. Air Valve
1
1028
1028
... More
100 mm Dia. Air Valve
1
849
849
... More
80 mm Dia. Air Valve
2
550
1100
... More
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I
-
-
-
... More
250 mm Dia. Reflux Valve
2
1286
2572
... More
150 mm Dia. Reflux Valve
4
518
2072
... More
Construction of masonry chamber 120x120x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar1:4 ( 1 cement : 4 coarse sand) for sluice valve size beyond 200mm dia with necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour and as per details below)with C.I. cover and frame 600mm x600mm weighing not less than 250 kgs in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size)
-
-
-
... More
Clear Size 1.20 x1.20 x1.0 M.
3
38273
114819
... More
Clear Size 90 x90 x100 CM.
4
32860
131440
... More
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation , surcharging, etc. complete.
34.69
245
8499.54
... More
Hydraulic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment, a to the required test pressure by providing all work force, materials, reciprocating pump, pressure gauge,including the cost of water required, maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing, as per the standards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For PVC/HDPE pipeline HDPE PIPES- Outer dia. 250 mm
700
20
14000
... More
Providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification.
0.4
142810
57124
... More
Sinking of well through all types of soil or rock other than pnuematic method of sinking complete as per drawing and technical sprcifications
-
-
-
... More
upto 3.0 m soil
3
3365
10095
... More
Beyond 3.0 m to 10.0 m depth
5.65
4616
26080.4
... More
Close timbering in case of shafts wells, cesspits, manholes, and the like including strutting, shoring and packing cavities(wherever required) complete. (measurements to be taken of face area timbered) Beyond 3 m
22.6
412
9311.2
... More
Providing & fixing P.V.C. water stopper 150mm wide and 6mm thick corrugated with centre bulb for insertion for construction joints in R.C.C. works complete in all respects as per the direction of the engineer in charge.
75.36
697
52525.92
... More
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No.: Bd.C.2 Page No. 275 Size 300mm x 140mm
0.29
67166
19178.04
... More
Providing and fixing in position habd rail in balconies landing and the like with 2" dia GI pipe resting 20x20mm MS square bars of clear height making necessary holdfast fixture (20mm square bars 15cm long) embeded in blacony concrete for resting the MS vertical square bars with holding ect as required (measurements will be made along the length of the hand rail) G.I. pipe Railing
11
1164
12804
... More
Providing and fixing M.S.chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size )including welding ,cuting and fabricating the plates to the required square or rounding shape ,making holes in the plate ,including providing and applying 3 coats of anticorrosive paint,etc. complete as directed by Engineer -in -charge 8 mm thick
8
4212
33696
... More
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia. M.S.bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved ,welding,anchoring and applying 3 coats of anticorrosive paint ,etc.complete as directed by Engineer-in-charge.
22.14
1345
29774.94
... More
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cu.m. 1 : 4 (1 cement : 4 coarse sand & Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
21.41
6115
130928.27
... More
Steel work in single sections including cutting, hoisting fixing in position and applying a priming coat of red lead paint.
8.56
13711
117426.49
... More
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
60
5352
321120
... More
G.I Barbed wire Fencing 1.2 metre high (Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807)
79
486
38394
... More
Providing and fixing steel glazed doors windows and ventilators of standard rolled steel sections,joints mitred and welded with 16 x 3.15cm lugs 10cm long embedded in cement concrete block 15cm x10cm size of 1:3:6 (1 cement: 3coarse sand 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws of raw plugs and screws for with fixing clamps or with bolts and nuts required,including providing and fixing of glass panes with glazing clips and special metal sash putty of approved made on metal beading with screws complete including applying a priming coat of red paint.
-
-
-
... More
Steel door (single leaf)
2.52
3306
8331.12
... More
Fixed steel window
2.88
2379
6851.52
... More
centre hung ventilors
0.72
2306
1660.32
... More
Providing and laying 25mm shahabad stone flooring over 25mm thick bed of cement mortar 1:4 (1 cement: 54 coarse sand) laid over with grey cemnt slurry mixed with pigment, including rubbling and polishing complete
21.44
1166
24994.38
... More
White glazed tiles 6mm thick in skirting, risers of steps & dado on 12mm thick cement plaster 1:3 With white cement slurry
35.04
1439
50422.56
... More
Orrissa Pan/ Indian Type WC pan Size 580X445X260 Jaquar make (CNS-WHT-451)
1
1860
1860
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required.
1
14771
14771
... More
Sewage Pumps -Supplying Non-clog Submersible Pump suitable for sewage/Liquid waste application with standard MOC and given duty points as below Liquid Sp. Gravity : 1.05 Motor : High efficiency class IE 3 as three- phase asynchronous motor as per DIN EN ISO 60034 / BEE – minimum 3 star rated. Motor Protection Type : IP-68, Insulation Class : H, Shaft Sealing : Double Mechanical seal Power Supply : 415 V (±10%) / 50(±5%) / 3 Phase Including lifting chain & guide rail ( 10 Mtr) , auto coupling. cable
-
-
-
... More
Pump - 1 DWF Flow - 62.36 LPS , Head 8 M - KW/HP
1
273216
273216
... More
Pump - 2 DWF Flow - 124.72 LPS , Head 8 M - KW/HP
1
364729
364729
... More
Pump - 3 DWF Flow - . 187.08 LPS, Head 8 M - KW/HP
1
517941
517941
... More
Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. welded Ductile Iron double flanged pipes - PN16 horizontally cast conforming to IS: 1537-1960 in Class K-9.Barrel Length of 2.5 metres
-
-
-
... More
200 mm
4
15132
60528
... More
250 mm
4
20805
83220
... More
300 mm
8
26098
208784
... More
Sluice Valve : - Providing and supplying, Lowering, laying and jointing in position at site of Providing double flange sluice valve
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile iron sewage double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded ductile iron to IS:1865 Gr. FG 400/15 or 500/7, four faces and spindle nut of leaded gun metal of IS:318 Gr. LTB 2/Al-bronze, inside screw of non-rising stainless steel AISI 410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (400mm and above will be fitted with BTB and gear box. and air plug) TYPE P.N. 1.0 (Class A )
-
-
-
... More
200 mm
1
61404
61404
... More
250 mm
1
84750
84750
... More
300 mm
1
116123
116123
... More
Non-Return valve : - Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A)
-
-
-
... More
200 mm
1
41469
41469
... More
250 mm
2
52639
105278
... More
300 mm
4
74799
299196
... More
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I
Nominal diameter in mm.
-
-
-
... More
200 mm
1
869
869
... More
250 mm
1
1286
1286
... More
300 mm
1
1733
1733
... More
Air Valve - Providing and supplying, Lowering, laying and fixing Kinetic Double Orifice type Air Valves
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valveas per fig DS1 withinbuilt isolating valve smallwith SS spindle and CI protective cap confirming to IS1 4845/2000 (with latest amendments).Low pressure large orifice chamber with vulcanite coated timber ball resting on moulded rubber seating and chamber having CI cowl protection.High pressure chamber shall have rubber coated timber ball as float having Float guides; and LTB or SS orifice nipple The body seat ring shall be of LTB as per IS 318 LTB2 or of SS. All nuts /bolts shall be of carbon steel of SS. The flange shall be drilled and faced ,as per IS1538(part 4 &6) suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B) - 50mm
1
11937
11937
... More
Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985.
-
-
-
... More
200 mm
4
332
1328
... More
250 mm
4
425
1700
... More
300 mm
8
544
4352
... More
Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of
required size and thickness with both side machined.
100
174
17400
... More
Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete.Double Socket Bend 90 Degree
-
-
-
... More
200 mm
2
5742
11484
... More
250 mm
2
8665
17330
... More
300 mm
4
11825
47300
... More
Providing, erecting and commissioning CI. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.
-
-
-
... More
200 mm
2
14932
29864
... More
250 mm
2
20013
40026
... More
300 mm
4
25836
103344
... More
Desigin, supply, Installing, Testing & Commissioning Mechanical Coarse Screen ( Multi Rake type) Screen shall be provided in screen channel. The mechanical screen shall be CHANNEL WIDTH:1850mm depth:5470MM,swd:1000mm, bar spacing:20 mm, Bar Size-10mmx thick x50 mm deep flat bars, angle of inclination:75 deg to horizontal moc of screen:ss 304, peak flow per screen:1MLD, vertical discharge height for accomodating conveyor :750 mm-including control panel 2 screen+1 belt conveyer with scada compatilble alonwith ultrasonic level sensors
1
1550000
1550000
... More
Designing , supply, Installing, Testing & Commissioning Conveyor belt.B911 BC-600W, Range 0-2000 Belt Conevyer of size 600 mm wide x2000 mm (c-c distance ) as per standard design.
1
300000
300000
... More
Supply, Installation, Fixing, testing & commmisioing of Thimble Mounted Manually Operated sluice gate clear opening along with MSEP Head Stock with regular Hand Wheel
2
305000
610000
... More
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for
pumps).
5
6394
31970
... More
Supplying, erecting, testing & commissioning 11 kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 1 no. feeder with 1 VCB. compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA
2
552609
1105218
... More
Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact
/ vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.
2
165366
330732
... More
11 kV CSS Fabricated from Galvanized Sheet Steel of thickness 1.6/2mm with 6mm base frame. The outdoor type Enclosure shall have IP53 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment The enclosure exterior shall be powder coated. (Colour Light Gray & DA Gray). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment. 11 kV Unitized Sub Station consisting of following :- 160 kVA, 11 / 0.440 kV, Copper wound, Oil Cooled Hermetically Sealed Distribution Transformer - (2 nos. out of which 1 stand by) with Off Circuit Tap Changer - range from +5 to -10 % in step of 2.5 % with bare bushing on HV and LV side with suitable protections and accessories conforming to Energy Efficient As Per IS-1180 (Part-1_2014) – BIS Level I including initial fill of insulating oil all as specified. Losses – At 50% Loading: 670 Watts, At 100% Loading: 1950 Watts HT Compartment consist of 11 KV, 630 Amp, Load Break Switch Fuse Unit consisting of Operating Handle & other standard accessories with Inbuilt 11 kV HT Metering Cubicle with 3 Nos CTs & PTs and MODEM fitted WITH incomer suitable for terminating 1 no XLPE cable upto 3 C x 240 sq mm. LV Compartment consists of 415 Volts, 315 Amp, 35 kA, 4 Pole Micro Processor Base MCCB - 1 Nos with LT Aluminum Bus bars - Interconnection by cable for HT connection & LT connection, 24Hrs Cyclic Timer, Complete with MCB, Contactors, mounting brackets, frame, cooling fans etc. Auxiliary equipment consisting of multifunction meter with V, I, F, P & E with RS 485 Connectivity with LT CTS of appropriate rating, indicator lamp for R Y B Indication LED type, Space for fittings 3 Phase 4 Wire electronic meter in sealeable compartment with 3 Nos CTs of required rating, Bus-Bar – On LV Side, wiring for control with PVC insulated 1.5 Sqmm Copper Wire for Voltage & 2.5 Sqmm for CT circuits.
1
1750000
1750000
... More
G.I Barbed wire Fencing 1.8 metre high (Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807)
60
789
47340
... More
Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete
as per specification no SS-AS/DLD.
1
20350
20350
... More
Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly
plastered by 12 mm thick including watering etc complete.
1
19628
19628
... More
Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and
finishing complete. (for above 9 m poles)
2
3536
7072
... More
Supplying & errecting distribution class 11KV thyrite type lightining arrester with nut bolts, on provided MS channel as per specfication no. OH-INS/LA
3
1347
4041
... More
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments...... 3 Core 95 sq.mm...... Note - Length of cable depends on source of power supply given by state electricity board
475
1540
731500
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size………….. 3 1/2 Core 95 sq.mm
50
965
48250
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
... More
3 1/2 Core 35 sq.mm
50
380
19000
... More
3 Core 2.5 sq.mm
50
169
8450
... More
3 Core 10 sq.mm
250
210
52500
... More
3 Core 25 sq.mm
50
300
15000
... More
Armoured PVC/XLPE 1100 V cable 3 1/2 core 95 sq.mm aluminium
200
836
167200
... More
Armoured PVC/XLPE 1100 V cable 3 core 35 sq.mm aluminium
50
330
16500
... More
Unarmoured PVC/XLPE 1100 V cable 3 core 10 sq.mm aluminium
250
117
29250
... More
Unarmoured PVC/XLPE 1100 V cable 3 core 4 sq.mm aluminium
250
79
19750
... More
Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
200
118
23600
... More
Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated
wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
200
86
17200
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required…………………...(11) 3 x 95 Sq. mm.
2
749
1498
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required……….11 KV, 3 Core x 50 - 95 sq.mm
2
29142
58284
... More
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required………. 11 KV, 3 Core x 50 - 95 sq.mm
2
18732
37464
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required…….3 1/2 x 95 Sq. mm.
2
818
1636
... More
Providing and erecting Heat shrinkable straight through joint kit for 11 KV (E) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT
2
22307
44614
... More
LADDER TYPE TRAYS( 100mm deep)…...450 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
110
1112
122320
... More
LADDER TYPE TRAYS( 100mm deep)…..150 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm
with rungs at 250mm c/c.(14SWG)
60
706
42360
... More
Perforated type Cable Tray....Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height complete with necessary coupler plates & hardware in approved
manner
100
441
44100
... More
BENDS FOR TRAYS…….Bends for 150 mm width X 100 mm depth with runner size 25x100x25mm, rung size
20x40x20mm with rungs at 250mm c/c.(14SWG)
4
1272
5088
... More
BENDS FOR TRAYS…….Bends for 450 mm width X 100 mm depth with runner size 25x100x25mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
8
2002
16016
... More
Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
10
545
5450
... More
Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc.
complete.
100
692
69200
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
100
333
33300
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
250
397
99250
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
250
416
104000
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
100
488
48800
... More
Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 415V, 4 ways four pole , up to 400 A MCCBs on iron frame, as per specification Including following componants 1.Trivector meter - Supply, installation, testing and commissioning of Trivector meter , Class0.5, three phase, 3/ 4 wire, 110/240V, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, tested by MRT along with Test Certificates, complete as required of following capacity of make L & T (ER300P) only: 1A/5Amps - 1 no. 2.Bus Bar chamber - Supplying and erecting bus bar chamber triple pole with neutral with copper bars, 500V 400A having 20mm (Width) X 4 mm (Thickness), with 99.9 % Copper purity as per E91E Grade & Current Density 1.6 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating .3. Circuit Breakers - a)Providing & erecting 4 Pole MCCB 415V, 400A -3 nos for incomer supply, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V.
b) MCCB, 4 Pole, Adjustable type, 35 KA, 250 A-CAT A-01 no.
c) 4 Pole MCCB 415V, 125A, 2 nos.
d) 4 Pole MCCB 415V, 100A, 2 nos.
e) TPMCCB 63A - 4 nos.
f) TPMCB 6A to 32A - 4 nos.
g) SPMCB 6A to 32A, B-series - 4 nos. h) 2 pole RCCB 16/ 25A - 1 nos.
-
-
-
... More
4. terminal spreaders suitable for 4 pole, upto 400A.
5.Supplying and erecting panel mounting type digital Ammeter & Voltmeter having three and half digit LED display - 2 sets.6. Supplying and erecting LT current transformers of suitable rating. 7.Supplying & erecting LED type indicating pilot lamp with LED colours blue, / Red / Yellow/ Green, 230 / 250V8.Supplying and erecting selector switchg extended rotary handles adjustable telescopic rod for panel as per requirement.9.Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral as per specification 10.Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB‟s on iron/ GI frame .... Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.a.12.5 HP & Up to 20 HP b. 25 HP & Up to 35 HP c. 40 Hp & upto 50 Hp 12. Supplying and erecting Iron work consisting of Various sections of MS and including Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears - 200 kg.13.Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as complete- 150 kg. 14. APFC Panel chamber -Supplying, erecting, testing & commisioning 30 kVAr, 440 V, 3 phase, 50 Hz., APFC panel with contactor logic with intelligent microprocessor relay, consisting of 2,3,5,5,5,10 or suitable steps of APP/MPP type capacitor units with detuned (harmonic filter) reactors of suitable rating, APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification
1
547951
547951
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or
any other purpose).
4
5278
21112
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm
thickness upto 3.3 kV.
6
2972
17832
... More
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value. Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode
14
33550
469700
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification
no. EA-EP
14
7407
103698
... More
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete
2
9943
19886
... More
Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by
the authority
200
154
30800
... More
Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
4
5753
23012
... More
Providing & erecting 7 m high (clear height) galvanised octagonal pole withfoundation bolts having bottom of 130 mm A/F, top 70 mm A/F on
providedfoundation as per specification no. OH-PL/OPL
4
17220
68880
... More
Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-
BKT/BPC
4
1579
6316
... More
Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing
complete. (above 6 m to 9 m poles)
4
3283
13132
... More
Supplying & erecting mains with 3x2.5 Sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per
specification No: WGMA/BW.
50
93
4650
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
12
1570
18840
... More
Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E- 27 base.
5
369
1845
... More
Supplying and erecting rectangular shaped LED Panel Light(1200mm X 300mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 4200 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%,
p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years
warranty.
5
3027
15135
... More
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 11.3 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 150 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
1
1164048
1164048
... More
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 100kVA up to 125 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per
specification no. GEN-AMF.
1
122889
122889
... More
Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 400A, 50 Hz with enclosure, flexibility of neutral connection, line and loadreversibility, changeover with phase barriers, source separator, terminal coversalong with staggered termination for cable connection and ATS controller withprovision of time delay protection of OV, UV, phase sequence changing, singlephasing and event logging, connected with provided leads complete complying toIS/IEC 60947-3 Part-1/6 .
1
88311
88311
... More
Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. ........12.5 HP & Up to 20 HP
1
11651
11651
... More
Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. .............25 HP & Up to 35 HP
1
30909
30909
... More
Auto transformer Starter with air break contactor ( Locally Fabricated )
40 HP (110 / 40 / 40)…….. Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end boxes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides.
Starter for Motor HP / Contactor Rating " Main/ Start/ Run". Cubical Panel Size 1.25 m height X 0.75 m width X 0.45 m deep.
1
81786
81786
... More
Electric Operated Circular or Rectangular Travelling Crane (Single Girder)Providing, erecting and commissioning single girder Electrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block.3 Tonne Capacity, above 8 m to 10 m Span
1
853456
853456
... More
Providing, erecting and fixing square bar of 50 x 50 mm EN 8 as rail for over head
crane on provided track, girder / continuous corbel beam, including supporting plate and "J" bolts.
20
2453
49060
... More
Providing, erecting Electric Valve Actuator for non rising spindle type sluice valve of PN 1 & PN 1.6 rating, totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S- 2, insulation class "F" and temp rise restricted to class "B" with IP - 67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be atleast 1.5 times max. torque required for opening and closing of valve with integral starter for ON & OFF operation.reduction gear box shall be atleast 1.5 times max. torque required for opening and closing of valve with integral starter for ON & OFF operation. -
-
-
-
... More
100 mm
4
87831
351324
... More
200 mm
1
97060
97060
... More
Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement.Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LEDOutput 4-20 mA / HARTPower supply - 24V DC ext. Display - 4" LED
5
36774
183870
... More
Designing, Supplying, Installing, commissioning & testing of Ultrasonic Raddar type Ultrasonic level transmitter CE marked with following technicalparameters at Raw Water PumpHouse and Interfacing with PLCpanel including mountingarrangement.
Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED
Range- 0 to …30... mtrs
Accuracy - +/- 0.25% of FullScale or better Enclosure- IP 68 Mounting - On PLC panel
1
69207
69207
... More
Supplying, installation, testing and Commissioning of Full Bore Carbon Steel Flanged ends Electromagnetic Flow Meter (FBEM), for Raw/ treated water with accuracy+/-0.5% and sensor of protection of IP 68 Grade for pressure rating PN 16 including sensor coil housed in Cast Aluminium/ Carbon Steel with anti-corrosive food grade powder coating; Co-axial signal sensor/ transmitter & power cable routed through duct of 50mm dia G.I. Pipe; surge arrestor; over voltage protection unit, PTFE/ Rubber Liner material(as desired by the Engineer-in charge). The output showing volumetric flow rate and totalized flow with other details shall be on LCD display screen mounted on the flow meter body or in the nearby control room with upto 25m length transmitter / sensor cabling and simultaneous transmission of reading through GSM Mobile signals to designated phone numbers and meter should have data storage of required capacity and shall be freely programmable for future upgradation and Scada compatible with power supply 80-300 V AC/DC etc. complete as directed by Engineer-in charge........300 mm
1
211629
211629
... More
Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no ofair handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBAat position as per specification no. APAC/ WAC
1
45399
45399
... More
Designing, Supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC Panel with modbus communicatuion port , as per IEC 62053 and in the prescribed format including mounting arrangement
2
33265
66530
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water PumphousePLC shall have Ethernet port & protocal for Modbus TCP communication with following IODI –16 num DO – 16 num AI –16 num AO – 8 num.7 inch color TFT HMI complete with programming shall be provided to interact with PLC The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house.MCB 10A DP – 1 num MCB 4A DP – 4 num 24 VDC Power Supply 10A – 1 num Push Buttons – 7 num Selector Switch - 2 num Control Contactor – 6 num Annunciator with 6 Windows NO to NC Type Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 numPanel Light with Door Switch – 1 num Control Indication Lamp – 5 num Wiring+ TB etc – 1 lot Hardware – 1 lot
1
216189
216189
... More
Design, manufacture, supply, installation, testing and commissioning of SCADA System for pump house.Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares. PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 & Rs485port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.SCADA Software of reputed company with developer & runtime license with minimum 256 number of Tags with following features & functions
1. Supervise real-time data in the form of graphical presentation2. Control pumping processes locally or through Remote locations3. Dynamic process Graphic, It should resemble the process mimic. SCADA should have good library of symbols so that develop the mimic as per required. When operator sees the screen he should know what’s going in plant.4. Alarm summery & Alarm history, SCADA system must be able to detect, display, and log alarms and events. When there are problems the SCADA system must notify the operators to take corrective action.5. Acquire real-time data as well as logs data with Real time trend & Historical time trend.6. Web Connectivity, Real-time displays can be accessed on remotely attached PCs and notebooks using internet.
SCADA Programming shall be done so as operator can visualize and control complete pump house operation from operator desk. All important alarms & events shall be logged. All the data from field instruments & equipments shall be logged. There shall be provision to take reports in required formats of real time & historical data, events & alarms.
There shall be provision of broadcasting messages, emails of reporting information. There shall be provision of access security.
An Industrial grade Din rail mounting ethernet switch with 5 ports shall be provided. An Industrial grade modem with 4G/5G GSM connectivity shall be provided.
1
274638
274638
... More
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing 4.5 pair 1 sq.mm. copper armoured conductor as per IS 694 on wall in GI tray or in ground.for Raw water and Pure water and WTP.
1500
373
559500
... More
Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
200
46
9200
... More
Supplying and erecting PVC insulated PVC round sheathed 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage
grade up to 1.1 kV
78
50
3900
... More
Supplying and installing cat-6 LSZH cable suitable for networking as per
specification no. WG-COC/NC
200
71
14200
... More
Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave,. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all
protections as per specification no. AP-UPS
1
47151
47151
... More
O & M of pumping station including man power, necessary preventive maintenance , maintaining the O & M schedule, , follow up with the respective agencies , maintaining the sufficient inventory and aesthetic of premises like landscaping, gardening etc.
-
-
-
... More
For 1st Year after satisfactory comissioning
12
77190
926280
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements