Public Works Department Tender

Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. Bitumen 80/100 @ 0.375 kg/sq.m

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803

Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

Earthwork in excavation of foundation of structures of culverts, abutments piers, retaining walls etc. as per drawing and technical specification, in all types of strata comprising any of the material such as soil, silt, sand, clay, gravel, murum of all varieties shingles pebbles, all types of conglomerates laterite rock etc. soft rock, marshy soil, ordinary rock, or disintegrated rock, fissured shattered/ decomposed rock or weathered rock, all such material as described under Appendix to those specifications either in full or in parts as the case may be by adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of chiselling, wedging etc in all conditions such as dry, moist, saturated, submerged, foul condition etc including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides, ramming of bottoms getting out the excavated soil/rock to be levelled & neatly dressed including pumping & bailing out of water, back filling the excavated earth to the extent required and utilizing the remaining earth locally for road work, barricading danger lighting, guarding and disposal of excavated earth as directed by the Engineer-in-charge, including all leads and lifts complete and upto depth of excavation as per MoRT&H Specification 304.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 mm nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level

In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.

Centering and shuttering including struttings, propping etc. and removal of formwork for : Foundations, Footings, Bases for columns and mass concrete.

vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc.

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge A) 110 mm dia

Supplying and fixing Pre-cast cement concrete kerbstones (factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/ basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 30 cm L x 50 cm H x 15 cm T To be procurred through GHRSSIDC & payment will be released on submission of invoices.

Providing & laying of minimun 60mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant. Size: 210mm x 105mm x 60mm (Type: Rectangular Shape) b) Other Colours To be procurred through GHRSSIDC & payment will be released on submission of invoices.