Public Works Department Tender

Construction of granular sub-base by providing coarse graded granitic or baslitic aterial, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401 For Grading II Material..

Earthwork in excavation of foundation of structures of culverts, abutments, piers, retaining walls etc., as per drawing and technical specification, in all types of strata comprising of any types of matarials such as soil, silt, sand, clay, gravel, murrum of all varieties, shingles, pebbles all types of conglomerates, laterite rocks, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rock or weathered rock and all such other materials as described under appendix “A” to these specification either in full or in parts as the case may be adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of blasting chiseling, wedging etc. in all condition such as dry, moist, saturated, submerged, foul condition etc including setting out, construction of shoring and bracing removal of stumps and other deleterious matter, dressing of sides, ramming of bottom getting out the excavated soil/rock to be leveled and neatly dressed pumping and bailing out of water, back filling the excavated earth to the extent required and utilizing the remaining earth locally for road work, barricading, danger lighting, guarding and disposal of excavated earth as directed by the Engineer-in-charge- all complete including all leads and lifts and upto depth of excavation as per MORTH Specification 304..

Providing and laying bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder to the specified percentage of total mix , transported to site, with all leads laid over a previously prepared surface with sensor paver finisher to the required grade, level and alignment and rolled with smoth wheeled roller and vibratory roller to achieve the desired compaction,using antistripping agent complete as per MoRT&H Specifications Clause 504 a) Grade-II (19mm nominal size)@3.3% of Bitumen-mix a) Antistripping agent @ 0.5% of bitumen content..