Public Works Department Tender

Earthwork in excavation of foundation of structures of culverts,abntments piers, retaining walls etc. in all types of Strata comprising of any of the materials such as soil, silt, sand, clay, gravel, murrum of all varieties, shingles, pebbles, all types of conglomerates, laterite rock etc soft rock, ordinary rock or disintegrated rock, fissured shattered /decomposed rock or weathered rock all such other materials as described under Appendix 'A' to these specifications either in full or in parts as the case may be adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of blasting, chiseling and wedging etc. in all conditions such as dry, moist,saturated, submerged, foul condition etc. and as directed by the Engineer-in-charge all complete including dressing of sides ramming of bottom including all leads and lifts including getting out the excavated soil as directed barricading danger lighting guarding and the departmental officers as per drawing and technical specification, including setting out construction of shoring and bracing removal of stumps and other deleterious matte, dressing of sides and bottom, back filling the excavation earth to the extent required and utilising the remaining earth locally for road work upto 3.00 m depth as per MORTH Specification 304 EXCLUDING DEWATERING. Ordinary Soil Meachanical Means.

Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Granular Sub-Base with Coarse Graded Material (Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) (ii) for grading- II Material