Public Works Department Tender

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Providing and laying scratch resistant floor tiles in different sizes of Johnson, somany, kajaria (thickness to be specifies by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid. Cement based high polymer modifies quick set tile adhesive (water based) conforming to IS:15477, using 5 kg adhesive per sq.m.of the area, in average 3mm thickness. b) 600 x 600 mm light Shades.Deduct for not using 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) bedding in laying of floor tiles.Fixing glazed /ceramic / vitrified floor tiles with cement based high polymar modified quick -set tile adhesive (water based) conforming to IS:15477 using 5 kg. adhesive per sq.m of tile area , in averagec 3mm thickness.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing position 62 mm thick double skin partition with frame in size 75 x 38 mm and internal frame of 50 mm x 38mm and fixing of 12 mm thick flat pressed melamine faced three layered prelaminated wood based particle board with exterior grade BWP /BWR synthetic resin as per IS-3087 (1985) type I on the edges of Navopan make or equivalent. One side shade of approved lamination and other side white balancing lamination. a)Second class teak wood

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions.Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section.Acrylic sheet

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section.Plain glass

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters.Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section.a) Acrylic sheet

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.a) Plain grill

Providing & Fixing of Aluminium Lay in Plain Tile Ceiling on 24 /14 mm 'T' Framework of module 600mm X 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. The tile shall be manufactured on advanced equipment, which includes several leveling. The tile end shall be raised up ward & bend outward to lay the tile in framework. The tile shall be Polyester based, Powder coated in white color. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main Tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross runner shall be suspended at 600 mm center to centre and further supported with 24 /14 mm cross Tee at 600 mm centre to centre with internal locking arrangements to form grid of 600mm X 600mm. The main Tee shall be supported by means of 4mm GI rod from slab / roof. The suspension shall be provided at 1200mm to 1500 mm centre to centre. Tee framework would be made of GI and Powder coated.

1 Bay Compactor Heavy Duty Type Single Faced Fixed Unit 1200Wx900Dx 230H with Drawers.Supply and installation of Nilkamal or equivalent make 1 bay Single Static drive unit body of Compactors of size 1200mm. x 900mm. x 2300mm. made out of 0.8mm. thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 17 loading levels (Load Bearing Capacity - 80 kgs. Uniformly Distributed Load) formed by 17 nos. drawers, finished with epoxy polyester powder coating of approved colour & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Each shelf made of 0.8mm. thick CRCA steel sheet shall be provided with 8 nos. of folds with an additional stiffner spot welded at the bottom. Insert type label holder shall be providedfor indexing and easy identification of the contents of the unit and shelves. Motion of the understructures along with bodies shall be achieved mechanically through a drive wheel and sprocket-chain mechanism.The whole compactor unit shall be provided with knock down construction which shall be installed by the supplier at site as per instructions of the engineer incharge. The Undercarriage shall be made up of welded frame of HR sheet 3.15mm. Thick conforming to IS:10748 suitably fabricated to take the load based on configuration having Fasteners, label holders, mounted on guide channels as per attached Detailed Specifications and Design etc. complete

1 Bay Compactor Heavy Duty Type Double Faced Movable Unit 1200 Wx900Dx 230H with Door Pair for Last bodySupply and installation of Nilkamal or equivalent make 1 bay Double Face drive unit body of Compactors of size 1200mm x 900mm x 2300mm made out of 0.8mm thick Cold Rolled Cold Annealed Steel conforming to IS:513 Grade, having 7 loading levels (Load bearing capacity - 80 Kgs. Uniformly Distributed Load) formed by 6 nos adjustable shelves, finished with epoxy polyster powder coating of approved colour & shade with a dry film thickness of minimum 40 microns, oven baked with a controlled temperature of 180 deg. C to 200 deg.C Each shelf made of 0.80mm thick CRCA steel sheet shall be provided with 8 nos of folds with an additional stiffner spot welded at the bottom. Insert type label holder shall be provided for indexing and easy identification of the contents of the unit and shelves. Motion of the understructures along with bodies shall be achieved mechanically through a drive wheel and sprocket chain mechanism. The whole compactor unit shall be provided with knock down construction which shall be installed by the supplier at site as per instructions of the engineer incharge. The undercarriage shall be made up of whelded frame of HR sheet 3.15mm. Thick conforming to IS:10748 suitably fabricated to take the load based on configuration having fasteners, label holders, mounted on guide channels as per attached detailed specification and design etc. complete

Storage Cupboard with Drawers 1200Wx900Dx 2300H Supply and installatin of Nilkamal or equivalent make Office Almirah with drawer units which shall have complete knock down construction wherein the body, shelf and drawers shall be made of high quality CRCA (Cold Rolled Close Annealed) sheet. The body, shelf and drawers of the almirah shall have minimum thickness of 0.8mm, with reinforced supports. THe almirah shall be provided with 21 nos of pull out drawers. The complete structure shall be epoxy polyster powder coated with minimum thickness of 50 microns. The almirah shall have seamless handle for efficient and safe operation with dual tone colour finish across storage for elegant look. The drawers shall move on telescopic heavy duty channels and shall function regarless of its own weight with smooth and quite operation. The Almirah shall be provided with plinth height of 7-20mm. The Almirah shall be provided with skirting of 60mm height. It shall provided with plinth screw arrangement to adjust the base on floor. All material used for manufacturing of almirah shall be reputed make such as a SAIL, TATA, Steel. JSW, etc.