Public Works Department Tender

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level

Providing and fixing Vitrified(full body tiles) antiskid tiles (600 x 600) of Nitco,Somany,Kajaria or equivalent, and 10-12mm thick tiles in dark shade in toilet floor, treads of steps,landing on 25mm thick bed of cement mortar 1:3 and joined with cement slurry complete.

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), of Nitco,Somany,Kajaria or equivalent with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over 0.50 sqm;Jet Black

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade.

An elastomeric cementitious waterproof coating for concrete and masonry.;Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete.

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.

Dismantling of existing Gypsum false ceiling including frame and stacking of materials within 50 meters lead.

Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet spaced 1200mm center to center and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings fixture smoke detectors etc. wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners level clips of size 85x30x0.8mm spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint for all heights as per specifications drawings etc. complete. (As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen.

Dismantling doors windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead;Area beyond 3 sq.m.

Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;Second class Indian teak wood

Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:;Second class Indian teak wood

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete cutting and making good the walls ad floors where required.;W.C. pan with white plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:;110 mm dia

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws;750 x 20 mm size

Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc. including making necessary connection with rain water pipe complete as per design.;0.80 mm thick sheet

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.;110 mm dia

Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete;300 x 16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete;250 x 10 mm

Providing and fixing bright finished brass handles with necessary screws etc complete;125 mm

Providing and fixing bright finished brass door latch with necessary screws etc complete;250 x 16 x 5 mm

Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.

Providing and fixing hydraulic floor spring of reputed make Everrite prabhat or equivalent as per the manufacturer's as specification having double action spring as approved by the Engineer-in-charge.

Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.

Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation

Providing and fixing bright finished brass butt hinges with necessary screws etc complete;125 x 70 x 4 mm (ordinary type)

Providing and fixing 5 litres pvc. Automatic flushing cistern with fittings.

Proving and fixing kitchen sink with R.S. or C.I. brackets C.P. brass chain with rubber plug 40 mm C.P. brass waste and 40mm M.I. or C.P. brass trap necessary unions complete including painting the fittings cutting and making good the walls where required.;White vitreous china sink size 600 x 450 x 200 mm

Providing & fixing (4') 100 mm sand cast iron grating for gully floor or nahni trap.

Provided and fixing chromium plated brass 100-mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (Indian make of approved quality).

PARTITION:-;Providing & fixing Partitions Yashashri make or equivalent made out of frame support structure in 2" x 1" M.S. sq tube & walls paneled by 20mm x 155mm x 1.2mm Upvc multi cavity section fixed on structure with hidden screwing system. Door frame & shutter made out of 50mm x 50mm x 2.5mm & 31mm x 150mm x 1.5mm Upvc multi cavity section. Some portion of partition can be made by 4mm fixed glass. The average weight of Partition is 17 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods

Labour;(Semi-skilled) Bandhani Mate Mazdoor Bhisti

Labour;Mate Coolie (ord.) Sweeper Helper Beldar

Carpenter;Furniture (highly skilled)

Plumber Electrician;Highly skilled

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes.

Extra fjor providing and fixing prince or equivalent make PVC SWR 90 deg. Elbow with /without outlet with 2 clamps for socketed half round eaves gutters.;140 mm nominal size

Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-80(blue)/(white);50mm outer dia.

Providing and fixing ball valve (brass) of approved quality :;Low pressure with copper. floats :;25mm nominal bore

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.;1000 lit. capacity

Extra for placing polythene tank on roof of floor three (2nd floor roof);1000 lit. capacity

providing and laying of heavy grill of cast iron ( 2*3.5)

Removal of existing fixtures/fittings washrooms as directed by Engineer in charge; a)Connection pipes

Removal of fixtures/fittings such as; Bibcocks angle stop cock health faucet seat cover & mirror

Removal of fixtures/fittings such as; Waste coupling

Removal of existing fixtures/fittings washrooms as directed by Engineer in charge;d

Removal of existing fixtures/fittings washrooms as directed by Engineer in charge;e

Removal of existing fixtures/fittings washrooms as directed by Engineer in charge;f

providing and fixing of mosquito netlon (indonet brand) as per direction of engineer in charge

Providing & fixing Ldrop Hafele SS Matt 10x16

Providing & Fixing of New concealed door closer to doors, HETTICH make

providing and fixing of duct taping ,waterproof of required color as per direction of engineer in charge