Public Works Department Tender
View complete overview of Goa PWD Tender
Costs
EMD
₹ 32,40,932Document Cost
₹ 30,000Tender Fee
₹ 4,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PWD_4731_1Bid Award Id
ViewTender No
PWD/WDI/ASW-17/2022-23/20Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Proposed Divisional Office Building for P.W.D at St. Inez, Panaji - Goa (4th Call)
BOQ Items
Earthwork in excavation over areas in saturated soil (exceeding 0.90 m upto a depth of 1.20 m) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be neatly dressed and leveled including pumping or bailing out water
530
-
820
Earthwork in excavation over areas in saturated soil (exceeding 1.20 m upto a depth of 1.5 m) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be neatly dressed and leveled including pumping or bailing out water
530
-
923
Earthwork in excavation over areas in saturated soil (exceeding 1.5 m upto a depth of 1.80 m) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be neatly dressed and leveled including pumping or bailing out water
530
-
1026
Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.60 m lift upto 1.50 m including shoring, strutting and pumping/bailing out water stacking the excavated soil not more than 5 m. clear from the edge the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming, watering and disposing of all surplus excavated soil within a lead upto 20m.
15
-
671
Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth(exceeding 0.6m upto a depth of 1.00 m) lift upto 1.50 m including shoring, strutting and pumping/bailing out water stacking the excavated soil not more than 5 m. clear from the edge the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming, watering and disposing of all surplus excavated soil within a lead upto 20m.
9.8
-
774
CARRIAGE OF MATEIALS - mechanical transport including loading, unloading and stacking of Earth up to 5km.
20
-
291.18
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
3715
-
182
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
Moorum
163
-
710
Boring holes vertically true to line and form for R.C.C. bored piles of required diameter in all strata except hard rock including removing slush, all kinds of soil and rock, percolating water etc. complete from the above to keep ready for concrete after placing reinforcement including cost of lining and bentonite slurry but excluding the cost of providing and laying concrete and reinforcement.
500mm dia bore : 1) upto 12m from ground
3840
-
2857
Above 12m but upto 15m depth add 5%
960
-
3000
Above 15m and upto 18 m depth add 5%
960
-
3150
Above 18m and upto 21 m depth add 5%
960
-
3307.5
Above 21m and upto 24 m depth add 5%
960
-
3472.88
Above 24m and upto 27m depth add 5%
960
-
3646.52
Above 27m and upto 30 m depth add 5%
960
-
3828.84
600mm dia bore : 1) upto 12m from ground
696
-
3734
Above 12m but upto 15m depth add 5%
174
-
3920
Above 15m and upto 18 m depth add 5%
174
-
4116
Above 18m and upto 21 m depth add 5%
174
-
4321.8
Above 21m and upto 24m depth add 5%
174
-
4537.89
Above 24m and upto 27m depth add 5%
174
-
4764.78
Above 27m and upto 30 m depth add 5%
174
-
5003.02
Laterite/ Brick Masonary
-
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete for quantities of works executed in or under foul position/under water condition.
215
-
1613.75
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
315
-
1291
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
145
-
4405
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
1345
-
5890
Half brick masonry using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/cm2
Above plinth upto floor V level 200 x 95 x 95
914
-
846
P.C.C & R.C.C
-
-
-
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing for quantities of works executed in or under foul position/under water including pumping / bailing out the water. All works upto plinth level
108
-
7871.25
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All works upto plinth level
230
-
6297
Centering & shuttering including Strutting, Propping & removal of forms for quantities of works executed in or under foul position/under water in:
Foundations, Footings, Bases for columns
1043
-
492.5
Centering & shuttering including Strutting, Propping & removal of forms for:
a)Foundations, Footings, Bases for columns
300
-
394
Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
2952
-
590
Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth
7410
-
503
Staircases (except spiral staircases) excluding landing
160
-
332
Chimneys & shafts
56
-
467
Suspended floors, roofs landings, shelves & their supports
7060
-
615
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) for quantities of works executed in or under foul position/under water in
All works upto plinth level
40
-
8147.5
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size).
In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
285.18
-
7214
In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
80.22
-
7280
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level for quantities of works executed in or under foul position/under water. V) M30 grade
481
-
9166.25
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level
M-30 grade of concrete
1655
-
7333
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
String courses, copings, bedplates, anchor blocks, plain window sills and the like.
13.95
-
14109
Providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. *Per bag of 50 kg of cement used in the mix .
65
-
40
Providing and laying reinforced cement concrete of grade M 30 ( mix design) with coarse sand and graded granitic or basaltic aggregate 20mm nominal size as per mix design requirements in bored piles of specified diameter at the approved workability and compaction as per the discretion of the engineer-in-charge including all operation for placing the concrete, lifting the casing in stages etc. but excluding the cost of reinforcement.
500mm dia pile : 1) upto 12m from G.L.
3840
-
2433
Above 12m but upto 15m depth add 10%
960
-
2676
Above 15m but upto 18 m depth add 10%
960
-
2944
Above 18m but upto 21 m depth add 10%
960
-
3238
Above 21m but upto 24 m depth add 10%
960
-
3562
Above 24m and upto 27m depth add 5%
960
-
3918
Above 27m and upto 30 m depth add 5%
960
-
4310
600mm dia pile : 1) upto 12m from G.L.
696
-
3369
Above 12m but upto 15m depth add 10%
174
-
3706
Above 15m but upto 18 m depth add 10%
174
-
4076
Above 18m but upto 21 m depth add 10%
174
-
4484
Above 21m but upto 24 m depth add 10%
174
-
4932
Above 24m and upto 27m depth add 5%
174
-
5425
Above 27m and upto 30 m depth add 5%
174
-
5968
Steel Work
-
-
-
Providing corrosion resistant steel CRS-500 bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.)(Confirming to IS 1786 of 2008) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member
633510
-
74
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.
In tees, angles, flats and channels
674
-
8279
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.
Ornamental grill
10100
-
148
Flooring & floor finishes
-
-
-
Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete
4470
-
1477
Providing and fixing vitrified (full body tiles) antiskid tiles (600x6000) and 10mm thick tiles in dark shade in toilet floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
445
-
1382
Providing and fixing 1st quality ceramic glazed wall tiles (Nitco, Johnson, Somany, Kajaria) conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.
Wall Ceramic Glazed Tiles : 300 x 600
1480
-
1110
Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Jet black
274
-
3447
Cat Eye
63
-
3447
Half rounding and polishing of edges of granite slab as per the requirement in treads of Staircase & landing etc as per the direction of Eng. Incharge.
390
-
200
Providing & fixing in position traction matting antiskid clear tape 2 inch wide (50mm) for staircase having Granite Treads. The antiskid clear tape should be mineral coated slip resistant material with pressure sensitive adhesive including cleaning, degreasing, priming to mask the surface (if required), presssing using rubber roller etc. complete.
390
-
126
Providing and fixing rough Kotah stone slab 25mm thk (unpolished) flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab all complete as specified and as directed by the Engineer.
565
-
1004
Providing and laying flamed finished Granite stone & polished Granite stone flooring in required design and decorative pattern with inlay of yellow tandoor & Green marble, in linear as well as curvilinear portions of the building all complete as per design given by Architect and working drawing with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer
124
-
6500
Providing and laying flamed finish Granite stone flooring in strips of 10cm width, in linear as well as curvilinear portions of the ramp all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab.
6.5
-
6806
Providing and and laying rustic floor tiles of heritage collection from NITO Tiles 300 x 300mm to be selected by Architect (thickness to be specified by the manufacturer) of 1st quality as approved by Engineer-in-charge in laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
226
-
1172
Plastering & Finishing works
-
-
-
6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand)
5857
-
148
12mm cement plaster 1:3 (1 cement : 3 fine sand)
11080
-
204
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster
3909
-
293
18mm cement plaster in two coats for heigth between 10m to 13m under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster.
781
-
336
18mm cement plaster in two coats for heigth between 13m to 16m under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster.
781
-
379
18mm cement plaster in two coats for circular columns under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster
513
-
322
18mm cement plaster in two coats for circular columns for heigth between 10m to 13m under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster
240
-
365
18mm cement plaster in two coats for circular columns for heigth between 13m to 16m under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion as recommended by the manufacturers for both coats of plaster
240
-
408
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
16937
-
85
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
16937
-
94
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete
4422
-
166
Painting three or more coats with acryllic exterior paint of approved brand and manufacture on walls at height more then 10m to 13m (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete
1021
-
179
Painting three or more coats with acryllic exterior paint of approved brand and manufacture on walls at height more then 13m to 16m (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete
1021
-
192
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
2424
-
94
Wood Work
-
-
-
FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2008 certified company.
d) 5” x 2 ½ “
5.2
-
1050
Providing & fixing polished granite stone frame work for doors with 150mm wide granite band overlap to each other with both side full round moulding on edges with grounting of matching colour grout as per direction of Engineer-in-charge.
320
-
1435
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board.
-
-
-
The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2008 certified factory.
-
-
-
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
-
-
-
Shutter Thickness : b) 35mm
114
-
6276
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon
a)Second class Indian teak wood
7.76
-
165175
Providing and fixing ISI marked flush door shutters 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws with viweing panel rectangular/square whereever necessary along with beading (as per the design and drawing provided by Architect) including providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on both sides. The door shall conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty including cost of adhesive, nails during fixing etc. complete as per direction of the Engineer-in-charge.
238
-
5141
Providing and fixing main entrance door of size 3.00 x 2.50m with door shutter frame and glass panel frame of MS tube of 60 x 40 x 3mm with same section internal horizontal support of wood at 190mm center to center as per design with treated unpolished teak wood of 180mm width and 12mm thick with fixing of 16mm thick clear plain glass inside end panel complete as per drawings.
7.5
-
12500
Providing and fixing powder coated Aluminium sliding door with plain glass in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: door with four sliding shutters using 18 mm series shutters section.
6.72
-
5006
Providing and Fixing M.S Box section main entrence gate with gate frame of MS tube of 50 x 50 x 3mm with internal vertical support of MS tube 25 x 25 x 2mm thick to the wood at 190mm center to center as per design with fixing of treated unpolished teak wood of 180mm width and 12mm thick complete as per architectural drawings and direction of Engineer in charge.
10.8
-
14344
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot patch fittings, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, & floor spring type door closer arrangement, all fittings of Ozone/Dorma or equivalent brand and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)
10.5
-
10638
Providing & fixing in position fixed glass for shower partition with 10mm toughened clear glass on patch fittings in SS 316 grade, Reinforcement bar, silicone sealant Complete.
31
-
6525
Providing and fixing 38 mm thick louvered shutters of Second class Indian teak wood with fixed or movable venetians 12 mm thick for window/cupboard shutters including bright finished or and black enamelled, iron hinges with necessary screws.
135
-
5755
Windows / ventilaors
-
-
-
Providing and fixing powder coated aluminium shutters/fixed panels with 5mm blue reflecive/mirror finish glass in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling in 18 mm series shutters section. etc. complete as per the direction of the Engineer-in-charge: windows with three sliding shutters for window openings for 1.6m ht., fixed windows for 0.4m ht and fixed glass panels in aluminium frame work fixed to the wall between floors to achieve a curtain wall appearence.
790
-
2733
Providing and fixing powder coated aluminium shutters and fixed windows in combination of equal half parts in blue colour with figured glass in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete using 18 mm series shutters section as per direction of the Engineer-in-charge: windows with two sliding shutters and fixed window.
50
-
2390
Providing and fixing Powder coated aluminium shutters with 5mm blue reflecive/mirror finish glass in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.
22
-
3492
Providing and fixing fixed glass window panel with first class Indian teakwood frame (6' x 4' min ) for windows including beading and two or more coats of melamine polish with scrapping, preparing surface etc.
4
-
3258
Supply and installation of Aluminium Louvers in tubes of size 100x50x1.5 mm thick fixed to steel frame work at 20cm center to center. Aluminium louvers of 100mm should be fixed to the supporting frame with cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
224
-
3545
Accesories for doors
-
-
-
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
40 x 3 mm flat iron hold fast 40 cm long
934
-
120
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
70
-
1459
Providing and fixing chromium plated brass tower bolt (barrel type) with necessary screws etc. complete.
250 x 16 x 5 mm
106
-
545
Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete
37
-
3874
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
106
-
309
Providing and fixing chromium plated brass handle with necessary screws etc. complete.
125 mm
170
-
131
Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).
64
-
701
Providing and fixing chromium plated brass sliding door bolt with bolts, nuts and screws etc. complete.
250 x 16 mm
50
-
287
Providing and fixing chromium plated brass coat hook with necessary countersunk screws including drilling etc. Complete
43
-
73
Providing and fixing chromium plated brass coat hook rack wall mounted with necessary countersunk screws including drilling etc. Complete
40
-
178
Providing and fixing Stainless steel D/H type handles of ozone/Dorma or equivalent make with necessary screws etc complete as per the architectural drawings and Engineer incharge. L 300mm/325mm x 22 to 25mm dia
2
-
1223
Providing and fixing Stainless steel D/H/S type handles of size 32mm x 450mm ozone/Dorma make with necessary screws etc complete as per the architectural drawings and Engineer incharge
4
-
3116
Providing and fixing Stainless steel patch lock of ozone/Dorma make to lock toughened glass swing door with necessary screws etc complete as per the architectural drawings and Engineer inchare.
3
-
2519
Water supply / Sewerage, plumbing and sanitation works
-
-
-
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I SCH-80(blue)/(white) 20mm outer dia.
100
-
182
25mm outer dia.
320
-
225
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. I SCH-80(blue)/(white) a)32mm outer dia.
30
-
260
b)40mm outer dia.
50
-
306
c)50mm outer dia.
65
-
394
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
a)110 mm dia
180
-
290
b)75 mm dia
225
-
154
Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :
a)110 mm dia
40
-
40
b)75 mm dia
50
-
31
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
75 mm dia
20
-
162
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :
a)100 mm dia
30
-
199
b)75 mm dia
20
-
136
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
a)110 mm dia
30
-
555
75 mm dia
30
-
246
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : b)110 mm dia
15
-
181
75 mm dia
25
-
114
Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
110 mm dia
10
-
272
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia
50
-
128
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : a)32 mm nominal bore
5
-
1191
40 mm nominal bore
10
-
1489
50 mm nominal bore .
15
-
1048
Providing and fixing square mouth S.W. gully trap grade 'A" complete with C.I. Grading brick masonry chamber and water light C.I. cover with frame 300x300mm size (inside) the weight of the cover to be not less than 4.53kg and frame to be not less than 2.72kg as per standard design.
150 x 100 mm size –P or S type
5
-
2781
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/cm2 in cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design.
-
-
-
Inside size 0.45x 0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.45x 0.60m weighing 70kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
6
-
17615
Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)
8
-
31306
Extra/Additional depth of above square/ rectangular manholes at above item no in fractions with 100kg/cm2 brickwork in cement morter 1:3 (1cement:3coarse sand) 23cm thick including providing and fixing CI footrests not weighing less than 5.30kgs incl. fixing in manholes @ 30cmc/c staggered in 20x20x10cm cement concrete blocks 1:3:6(1cement:3coarse sand :6graded stone aggregate 20mm nominal size) 12mm thick plaster inside and outside with cement morter 1:3 (1cement :3coarse sand)including adding water proofing compound of approved brand with a floating coat of neat cement.
a) 0.45 x 0.60m Manholes.
90
-
118
b)0.90 x 0.60m Manholes.
120
-
144
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. unplasticised non-pressure PVC pipes for using underground drainage and sewerage system confirming to IS : 15328 - 2003 stifness class SN-8 (8 KN/m2,SDR -34) 160mm in dai
70
-
548
Supplying at store or site of work including all taxes ,freight, loading, unloading and stacking at site Oriented PVC (PVC-O) ring fit type pipes having orientation class 500, conforming to ISO 16422-2014,and / or confirming to relevant IS code, with integral homogeneous spigot having elastomeric sealing ring made of EPDM rubber ( one per pipe) ( WITH EXCISE DUTY) PN 16 : 160mm
12
-
842
Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer incharge. 160 mm OD
82
-
5.9
Jointing of rigid / SEL FIT PVC pipes by cleaning the pipe with solvent cement including the cost of solvent cement and hydraulic testing of joints etc. complete as per IS:7634-1975 Part 3, including hydralic testing of joints as directed by the engineer incharge.
17
-
66
Toilet fittings
-
-
-
Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.
Orissa pattern W.C. pan
30
-
5387
Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required.
W.C. pan with white plastic seat and lid.
10
-
6197
Proving and fixing white vitreous china two peice European water closet Campbell of Cera/Hindware/Perryware make snow white with cistern, soft close seat cover and lid and twin flush fittings and comprising of single syphonic P or S trap, white solid PVC soft close seat cover with lid all confirming with the EWC set to match the shade and colour including fixing of WC pan connector with rubber lip ring, straight / bend type for WC connections.including necessary bolts,bents, tees, c.p.brass screws, c.p.brass hinges, rubber buffers of approved make and model including making holes / chases in the wall and floor and making the surface good to the satisfaction of Engineer.of approved municipal design complete, including cutting and making good the walls and floor required.
4
-
13111
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required.
Range of two urinal basin with 10 litres pvc. Automatic flushing
10
-
7530
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps.
2
-
6031
Proving and fixing Oval counter wash basin in Ivory colour of Cera/Hindware/Perryware make 560mm x 470mm in dimension with necessary bolts, bents, tees, brass screws including making holes in the wall if required and making the surface good to the satisfaction of Engineer.
40
-
4275
Proving and fixing counter top wash basin of Cera/Hindware/Perryware make thin rim Canal 370mm in diameter with necessary bolts, bents, tees, brass screws including making holes in the wall if required and making the surface good to the satisfaction of Engineer.
3
-
3539
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm.
Jet Black
108
-
3968
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
63
-
415
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: 45 cm (18”) length .
44
-
153
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
44
-
1345
Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993
44
-
492
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore
4
-
1499
Providing and fixing brass bib cock (heavy) of approved quality :
20 mm nominal bore
40
-
680
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore
44
-
568
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore
43
-
1466
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock with extended lever handle and wall flange Confirming to IS 8931;1993 15mm nominal bore
20
-
1665
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
4
-
1375
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.
Overall size 1040mmx510mm (41"x20") bowl size 460mmx410mmx200mm (18"x 16"x 8") depth 200 mm. Glossy. 1.0mm thk,
22
-
8362
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws.
750 x 20 mm size
4
-
1539
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws.
a)Glass container
4
-
1513
b)Plastic container
40
-
1413
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
40
-
857
Providing and fixing mirror of superior glass (5mm thck) of approved quality, shape & size complete including edge polishing with CP brass screws and washer, cleats, CP studs etc. Complete.
42
-
3118
Proving and fixing in position wall mounted Lift up / Movable support U shaped grab bar having length 600mm x 100mm Anti bacterial grab bar rail of Ozone/ Cera make or equivalent with necessary screws and acessories as per the direction of the Engineer in charge.
1
-
9768
Proving and fixing in position wall mounted grab bar rail length 600mm of Ozone/ Cera make or equivalent with necessary screws and acessories as per the direction of the Engineer in charge.
3
-
3161
Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent
425
-
691
Providing and fixing Urinal Partitions of approximate of Granite slab of approved shade of 18mm thick , mirror polished on both sides, with all visible edges fully rounded and corner chamfered including fixing in position by cutting a chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size), curing etc. complete all as per design and working drawing and as per direction of Engineer and finished smooth.
7.2
-
5777
Roofing & ceiling
-
-
-
Providing and fixing 15mm thick densified tengular edged eco friendly light weight calcium silicate false ceiling tiles (like Aerolite) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm,
-
-
-
resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. (As Directed by Engineer in Charge)
-
-
-
Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen.
382
-
1793
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mmincluding all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
381
-
600
providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth above 610mm) including all the accessories complete as per the directions of the Engineer in charge.
191
-
645
Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.
-
-
-
The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Glass Wool Insulation with FSK facing 50mm with 24 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
2733
-
2236
Micellaneous works
-
-
-
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
2790
-
872
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.
Pre-construction
1210
-
82
Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.
5
-
4969
Providing and fixing in position S.S. hand rail in main stair case, and landing with 50mm dia S.S 316 grade and vertical post of 40mm dia SS pipe 316 grade fitted with 12mm thoughened clear glassi including Ozone / Dorma make SS patch glass fittings as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.
95
-
7920
Supplying and fixing of Precast R slabs (factory made, the factory should be ISO certified and registered under Diectorate of Industries, Govt. Of India) at site in concrete Grade of M-25 with 20mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.S 10mm bars and PVC cups including cost of reinforcement, Certificate from manufacturer shall be produced indicating grade of concrete and minimum contenet of steel in the product along with 5 year free replacement waranty in case of brokage complete and as directed by Engineer - in charge. Size 600 x 500 x 75 mm with steel reinforcement not less than 2.25 kg per unit
400
-
515
Providing and fixing 12mm thick clear toughened glass chajja of 600mm width to the wall with wall to glass Ozone/Dorma make patch fittings including scaffolding work complete to perform as per specification and approved drawings. The gaps between glass panels and wall at the perimeter of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof as per the Engineer in charge.
62
-
4840
Supplying and laying of 35mm thick Artificial grass in terrace area including cutting to size and fixing and jointing sheets of artificial grass together with necessary equipments as per the Engineer in charge.
56
-
1740
Providing and fixing to the external wall CNC cut designed ACP sheet on powder coated aluminium frame work to hide AC outdoor unit in elevation with aluminium frame work of section of 60 x 40mm and 4mm thick ACP sheet with elagant design cut by CNC as per the Architectural drawings and directions of the Engineer in charge.
12.6
-
4334
Providing and fixing glass etching film to desin on toughened glass doors and partition as per designs approved by the Architect including necessary fixing items complete.
4
-
750
Fabricating and installing toughened glass canopy with steel pergola beams and columns of I section in size 250 x 125 mm with Aluminium composite panel cladding on all 3 sides of the steel sections and fixing 12mm thick toughened clear glass on the top of the sections including scaffolding work complete to perform as per specification and approved drawings. The Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) includes cutting, hoisting, fixing in position and applying priming coat of red lead paint. The gaps between glass panels for the entire assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof as per the Engineer in charge.
60
-
10522
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
3.6
-
3843
Electrical Work
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. '(f) Group C -- with Cat B Modular Accessories
1236
-
914
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2730
-
237
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. '(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)
2350
-
156
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. '(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit))
2775
-
191
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. '(b) Cat B
218
-
350
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. '(b) Cat B
1805
-
319
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.'(b) Cat B
91
-
395
Supplying and fixing brass batten/ angle holder including connections etc as required.
36
-
61
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) '(a) 4 way with 100A MCCB as Incomer, double door, Cat A
28
-
8779
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/ RCCB /Isolator) interconnection between incomer MCB and busbars of following ways (but without MCBs as required). '(a) 4 way (8+12), double door, Vertical type, Cat A
14
-
7446
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. '(a) SP, Cat A
504
-
245
Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required. '(a) 40 A, Cat A
16
-
928
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required". '(b) Cat B
75
-
1210
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). '(b) In rocky strata
10
-
7460
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
150
-
181
Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required
2
-
918
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. '(a) 2 Pair
820
-
33
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. '(b) 20 Pair
5
-
856
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required. '(a) Cat 6
7175
-
49
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B
428
-
393
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. ' 4 Core 10 sq.mm
690
-
93
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 25 sq.mm
840
-
187
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required.
1080
-
46
Providing and fixing 4mm dia copper wire on surface or in recess for loop arthing along with exsisting surface /recessed conduit/submain wiring /cable as required.
2160
-
90
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
56
-
167
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. '(4) 4 x 10 Sq. mm.
28
-
128
Supply and erecting S type Stainless Steel fan hook fabricated out of 10 mm round bar complete as required.
218
-
26
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator). '(m) 4 way double door Cat B
13
-
1206
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B
24
-
229
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. '(d) 100 Pair
1
-
3254
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements