Public Works Department Tender

Provision of Hump type speed breakers for general traffic at preferred crossing speed of 25 km/h and above as per standard having and specification in IRC 99-1998. The speed breakers shall be formed by placing premixed bituminious macadam and a layer of asphaltic concrete carpet (hot mix) after the surface is indented and tack coat applied to the location where required. For General traffic of 25 Kmph

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes

Cautionary/Mandatory/Facility Information Sign Board with SS Structure Providing & fixing of cautionary sign board ofCautionary/Mandatory/Facility Information sign board made out of retro reflective sheeting conforming to Type XI standards of ASTM D4956-09 & as per IRC-67: 2012 specifications, fully covered over 4mm thick ACP/2mm thick Al supported with back support frame of 25x25x3 mm stainless steel angle of 304 grade. Board Shall be fixed to a vertical post of 80mm dia stainless steel pipe of 3.6 mtr height and firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 45 cm X 45 cm X 60 cm etc, 60 cm below ground level. 10 years warranty & a certified copy of three years outdoor exposure report from an independent lab as per IRC 67-2012 for Type XI retro reflective sheeting shall be submitted by the contractor. a) 900mm Triangle - Cautionary Sign