Public Works Department Tender

Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete

Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00

Rounding of edges of marble slab to semi circular slope

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.

d) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing brass bib cock (heavy) of approved quality : a)15 mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : a)15 mm nominal bore

Providing and fixing brass stop cock (heavy) of approved quality a)15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality c)High or low pressure with plastic floats: 1)25mm nominal bore

Providing & fixing kitchen sink including making all connections excluding cost of fittings a)White vitreous china sink size 600 x 450 x 200 mm

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per directions of the Engineer in charge.(External work (heavy duty SDR 11 pipe) . pipes

b)20 mm nominal outer dai

Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.

a) 110 mm dia

b) 75 mm dia

Providing and fixing rigid PVC SWW soil waste and rain water drainage pipes of approved including lubricating etc. complete (single/double) socketed:

a) 110 mm dia

b) 75 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :

a) 110 mm dia

b) 75 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :

a) 110 mm dia

b) 75 mm dia

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with grade M 25 mix design with coarse sand and graded granitic or basaltic stone aggregate as per mix design requirements foundation concrete M 25 mix design with coarse sand graded granitic or basaltic stone aggregate as per mix design requirements inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design

d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Providing and placing on terrace roof of floor two (1st flor roof0 single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. b) 500 lit. capacity

Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: a)30 cm (12”) length .

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Specified Cross Section b) b) 4” x 2”

Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos & Shutter Thickness : a) 32mm

Providing & Supply canteen table 0.75x0.75x0.76mm made of M.S stand powder coted top 19mm Bason board with top granite finish

Providing Stainless Steel Febricated 3 Burner range (1800x600x810mm)

Supply of stainless steel seating chair for canteen