Public Works Department Tender

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations), Cat B.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required, 5/6 A switch Cat B.

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required, CatB.

Supply and Fixing PVC Square/Round block on wall /surface.

Supplying and fixing brass batten/ angle holder including connections etc as required.

Installation, earthing, testing and commissioning of pre-wired fluorescent fitting/ compact fluorescent fittings/LED fittings of all types complete with all accessories and tube etc. directly on ceiling / wall including connections with 1.5 sq .mm FRLS PVC insulated copper conductor single core cable and earthing etc. as required.

Installation, earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required;

SP, CatB.

SPN, CatB.

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)

(n) 8 way double door Cat B

Supplying and fixing SP blanking plate in the existing MCB DB complete as required

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe . g)watering arrangement(plumbing will be paid seperately). In rocky strata.

Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt).

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium) /recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required, 20mm.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required;

2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm casing ).

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing )

2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing ).

Supply and erecting 'J' type Mild Steel fan hook fabricated out of 35 X 6 mm flat strip suitable for rafters complete with coach screws etc as required, For 4 inches rafter size.

S.I.T.C of 50W LED floodlight luminaire, with efficient high output LED integral driver in pressure die cast metallic/PDC housing having IP65/66 protection better optics for uniform light distribution mounting bracket connection terminal and other accessories etc, including connection complete as required of makers, Havells JETA Quanto Plus JETAQUANTOPLUSFLP 50W led 757 Symlens crompton model Profile+ NEO LFY-50 CDL/60-M Bajaj model Amaze LED BJFL 50 W LED I white Philips model BVP 120 LED 35 CW FG SI PSU GR or equivalent model of above makes only(superseding at the time of execution) as directed by the Engineer in charge

Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories, Cat B.

Supply of 4feet, LED Single Box type, powder coated CRCA body fitting with all accessories, suitable for 18/20/22W LED tube, including 1no. of LED tube having intergral driver, complete as required of makes: Havells, model-Regal Batten, T8 upto 1x22w SSBSWH (tube- Photon Ultra, E2.0 121 3T8 SSTL 20w LED 865 SPC).// Crompton, model-Eco-I, IGP 161 LT8-16 (tube-Ultron, LT8-20-865(2). // Jaquar, model- LUNI 01x 120xC, CW, 20w (tube-LTBL 01x020xC Tube, Al-PC based, CW, 20w). //Bajaj, model- BLRB-DB 118 (tube-BLRB 20w LED 6500k). or equivalent models of above makes only (superseding at the time of execution), as directed by the Engineer-in-charge.

Supply of 9W, B22 cap, cool day light (min. 800Lm) LED lamp of make Havells//Bajaj // Philips // AnchorPanasonic//Jaquar-sparkHD or equivalent lamps with similar specifications in Crompton / Wipro.

supply of 16 inch wall mounted fan of make bajaj model regal or equivalent in havells,crompton, Usha, Almonard as per instruction of Engineer in charge

Supplying and fixing extra down rod of 10 cm length dia heavy gauge including painting etc as required

Supply, installation, testing and commissioning of electronic type single phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.

(b) 10 to 40 A

Supply and erecting meter box suitable for single phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department.

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 Core 6 sq.mm

Supply of PVC insulated Aluminium service connection wire of size 2 x 4.0 sq.mm flat wire of reputed make with ISI mark (90Mtr coil).

Dismantling of old wiring, ceiling fans, fittings, switchboards, DB etc. complete as required and shifting it as directed by the Engineer-in-charge .