National Centre For Polar And Ocean Research Tender
Calculate bid estimation of Goa NCPOR Tender
Costs
EMD
₹ 1,52,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NCAOR_853967_1Tender No
NCPOR/Estate/ET-04(RT)/2024-25Tender Authority
National Centre For Polar And Ocean Research ViewPurchaser Address
-Website
http://http://www.ncaor.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation in foundation, pipeline, trenches drain not exceeding 1.5m in width or 10sqm on plan including dressing of sides, ramming of bottoms lifts up to 1.5m including setting out excavated soil and disposal of surplus soil within 50m lead with Hard rock (blasting prohibited)
10
-
-
... More
Dismantling/HILTI chiselling carefully existing external damaged plaster & concrete in building walls/ceiling parapets etc and damaged floor tiles in floors/skirtings etc any thickness & concrete (IPS) in building rooms etc at all heights (15m)/slopes, including all scaffolding/staging /platforms & stacking debris as directed (50m lead) & carting them away to contractors dump yard outside the campus.
1
-
-
... More
Backfilling of trenches drain not exceeding 1.5m in width or 10sqm on plan with excavated soil including all tools, tackles, equipments, machineries, labours etc. complete as directed by engineer in charge.
10
-
-
... More
Backfilling of trenches or drains not exceeding 1.5m in width or 10sqm on plan with Good Earth at said locations including all tools, tackles, equipments, machineries, labours etc. complete as directed by engineer in charge.
10
-
-
... More
ROOFING / WATER PROOFING WORKS:
-
-
-
... More
Providing and fixing of broken Mangalore Tiles in sloping roof at all heights including all T, P & M and scaffolding. Debris to be disposed as directed within the campus area. Providing and fixing Mangalore Tiles as per size including ridge tiles. No separate payment for ridge shall be made.
200
-
-
... More
Providing and fixing on roof cement concrete tiles of size 330 x 420 mm including ridge tiles of approved colour, make and as per approved pattern on cement bands over roof slab including labour, tools, equipments, etc. complete as per direction of engineer in- charge.
200
-
-
... More
Providing and application of Sika Quick 1000 repair mortar to fill the minor cracks above RCC flat / sloping roof/ damaged plaster wall surface, also if loosened concrete observed will be removed till sound concrete is found and will be treated by Sika Quick 1000. The system will include opening of cracks by 1" X 1", loose concrete then cleaning with water, application of bond coat & application of repair mortar. Curing for 1 day. Supply and application of "SikaTOP Seal 109 hi" above Flat / Sloping roof. Two components, easily applied specially formulated fibre reinforced acrylic polymer modified cementitious, elastic coating. Primer. SikaTop® Seal-109 hi. Consumption Primer: 0.10 kg/m2. Base coat: SikaTop® Seal-109 hi. Consumption base coat: 1.2 kg/m2. Reinforcement: Sika® Fab-1. Top coat: SikaTop® Seal-109 hi. Consumption top coat: 1.30 kg/m2. System requirements: conforms to IS 2645, IS 101; elongation at break: 40 %; slant shear bond strength: approx. 4 N/mm2 as per FIP 5.15; water permeability passes as per IS 2645; weather resistance as per IS 101. The vertical surface of the adjoining walls are to be treated upto a height of 30cms.Plan area to be measured for payment.
100
-
-
... More
Providing and applying of "SIKA 101h" Cement Based Crystalline Waterproofing System for toilets / balconies / water tanks. Concrete surface must be clean, sound, level and uncontaminated by oil or grease. Removal of cement laitance, formwork-traces and loosely adhering particles by mechanical means. Area of honeycomb concrete and other surface imperfections must be repaired with quick sika mortar by adding polymer Sika Latex Power in ratio 1:3 with water. Debonding render must be removed. Wet surface until saturated. Add 8 litres of clean water to 25 Kg of "Sika 101 h" stir with low-speed mixer for 5 minutes until a lump free smooth brush able consistency is achieved. Application of 1st coat by a medium - hard bristle brush on the wet surface and leave to harden (2 - 6 Hours, depending on the temperature). apply second coat in the similar way once first coat gets cured. Consumption 1 Kg/m2/coat. Two coats recommended. Sika 101h must be prevented from drying out too rapidly. The freshly applied surface must be protected from rain and strong winds. Sika 101 h should be protected in pedestrian areas overlaying with 1:3 cement sand screed. Job is all inclusive as above. The vertical surface of the adjoining walls is to be treated upto a height of 90cms.Plan area to be measured for payment. Approved Brand: Dr. Fixit /FOSROC/SIKA.
1
-
-
... More
Providing and fixing sandwich PUF panels at all heights, of approved make, thickness and shade. The sheets of the panels should be SS – 304 grade and fixed with necessary fitting/ screws etc all SS or GI, including labour, tools, equipments, machinery, etc. complete as per direction of engineer in charge. 50 mm
1
-
-
... More
Providing and fixing sandwich PUF panels at all heights, of approved make, thickness and shade. The sheets of the panels should be SS – 304 grade and fixed with necessary fitting/ screws etc all SS or GI, including labour, tools, equipments, machinery, etc. complete as per direction of engineer in charge. 125 mm
1
-
-
... More
Providing and fixing sandwich PUF panels at all heights, of approved make, thickness and shade. The sheets of the panels should be SS – 304 grade and fixed with necessary fitting/ screws etc all SS or GI, including labour, tools, equipments, machinery, etc. complete as per direction of engineer in charge. 150 mm
1
-
-
... More
MASONRY WORKS:
-
-
-
... More
Brick work using common burnt clay building bricks in cement mortar 1:5 (1 cement :5 sand) with best quality local bricks 40 kg/cm2
7
-
-
... More
P/I half brick masonry in cement mortar 1:4 (1 cement :4 sand) with best quality local bricks 40kg/cm2
1
-
-
... More
Brick work using fly ash building bricks in cement mortar 1:5 (1 cement :5 sand) with best quality local bricks 40 kg/cm2
5
-
-
... More
Providing and laying AAC block masonry with factory made precast concrete solid blocks of size 600 x 200 x 100 in super structure above plinth level including cementitious adhesive, etc. complete as per direction of Engineer in- charge.
5
-
-
... More
PLAIN AND REINFORCED CONCRETE WORKS:
-
-
-
... More
Providing & Laying cement concrete of M30 at all heights with design mix of cement content of 360 kg/m3(OPC-43), water of 144kg/m3, graded granitic or basaltic stone aggregate 20mm downward nominal size 661kg/m3 & 10mm stone aggregate of 479kg/m3, coarse sand of 807kg/m3, Admixture superplasticizer of 2.95kg/m3 (FOSROC). including reinforcement Fe 500 grade (TATA), cost of centring and shuttering & levels including waterproofing compound in the proportion recommended by the manufacturersanufactures per bag of 50 kg of cement used in mix & as Approved by the Engineer-In -Charge in: String course; Copping; Sill concrete; bed block concrete, Slabs, Beams, Landings etc.
1
-
-
... More
Providing & Laying cement concrete of M30 at all heights with design mix of cement content of 360 kg/m3(OPC-43), water of 144kg/m3, graded granitic or basaltic stone aggregate 20mm downward nominal size 661kg/m3 & 10mm stone aggregate of 479kg/m3, coarse sand of 807kg/m3, Admixture superplasticizer of 2.95kg/m3 (FOSROC). including reinforcement Fe 500 grade (TATA), cost of centring and shuttering & levels including waterproofing compound in the proportion recommended by the manufactures per bag of 50 kg of cement used in mix & as Approved by the Engineer-In-Charge in : Repairing and retrofitting of CC structures with M30 grade concrete, at all heights including scaffolding, shuttering, labours, equipments, tools, etc. complete as per direction of engineer in- charge
1
-
-
... More
Providing & laying plain cement concrete flooring (1:2:4) 1 cement:2 coarse sand :4 aggregate 20mm down size) upto 120mm thick including ramming to proper line & level existing rubble soiling in PL; watering etc complete.
9
-
-
... More
DOORS AND WINDOWS:
-
-
-
... More
Providing and fixing wood work in frames of doors and windows and other frames, including removing of old frames, including fixing of hold fast 6 nos for doors and 4 nos of windows compete with Termite treatment shall be done for all wooden & ply members, complete as per direction of Engineer-In- Charge: Second class matti wood
1
-
-
... More
Providing and fixing wood work in frames of doors and windows and other frames, including removing of old frames, including fixing of hold fast 6 nos for doors and 4 nos of windows compete with Termite treatment shall be done for all wooden & ply members, complete as per direction of Engineer-In- Charge: First Class Teak wood for wooden table,door/window frames etc.
1
-
-
... More
Providing and fixing wood work in frames of doors and windows and other frames, including removing of old frames, including fixing of hold fast 6 nos for doors and 4 nos of windows compete with Termite treatment shall be done for all wooden & ply members, complete as per direction of Engineer-In- Charge: FRP frames for FRP doors
10
-
-
... More
Providing and fixing wood work in frames of doors and windows and other frames, including removing of old frames, including fixing of hold fast 6 nos for doors and 4 nos of windows compete with Termite treatment shall be done for all wooden & ply members, complete as per direction of Engineer-In- Charge: WPC (Wood Polymer Composite) solid door/window/Clerestory windows Frames of size 65 x 100 mm for WPC doors.
10
-
-
... More
Providing and fixing 35 mm thick teak wood panelled glazed shutters for doors and window including fitting 2nd class teakwood. Termite treatment shall be done for all wooden & ply members.
2
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Butt hinges:125 x 75x4mm
5
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Butt hinges:100x75x4mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Butt hinges:50x45x3mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Sliding doors bolts: 300x16mm
3
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Sliding doors bolts: 250mmx16mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Tower bolts: 150x10mm
4
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Tower bolts: 100x10mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Tower bolts: 200 x 10mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Handles: 75mm - 100mm
2
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Handles: 125mm- 200mm
9
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Sliding flat latch: 300mm
4
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Sliding flat latch: 200mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Hook and eye: 150mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete:Hook and eye: 100mm
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete: Curtain rod chrome plated / powder coated with bracket/ end socket. 20 - 25mm dia.
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete. Providing and fixing SS soft close hinge of approved make and as instructed by engineer in- charge
1
-
-
... More
Providing and fixing SS/ Allum. Fittings including removal of old fitting etc. complete.Providing and fixing SS- 316/ 304 grade self-tapping/ normal screws of approved make.
50
-
-
... More
Providing and fixing night latch (Godrej make 7 lever) as approved by engineer in- charge
1
-
-
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete: 300x16x5 mm
5
-
-
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete: 250x16x5 mm
5
-
-
... More
Providing and fixing 4-6mm thick clear/frosted glass and fixed with teak wood polished beading as per requirement including removing of broken glass panes, cutting and removal of door part, refiling of glass lambi putty, nails etc. complete
1
-
-
... More
Providing and fixing bright finished brass mortice latch and lock and pair of levers, handles of approved make with necessary screws complete as per existing ones and as directed by engineer in- charge.
4
-
-
... More
Providing and fixing SS - 316/ 304 grade mortice latch and lock and pair of levers, handles of approved make with necessary screws complete as per existing ones and as directed by engineer in- charge.
1
-
-
... More
Providing and fixing bright finished Godrej Keyless Cylindrical Lock with necessary screws complete as per existing ones
2
-
-
... More
Providing and fixing mosquito nets netlon or equivalent make over the window frame including fixing Velcro tape in the Aluminium /wooden frames and net with screws/ nails etc.
20
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: First Class FRP doors with sheets of min 1.5mm on both sides of the door glued to the solid wood within with epoxy along with steel butt hinges and necessary screws included
2
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 35 mm thick, of required size and of approved make with 2mm thick WPC board coated with PVC film fixed on both faces of shutters glued to solid PU foam core within, with epoxy along with WPC door frame and stainless-steel butt hinges with necessary screws.
2
-
-
... More
Providing and fixing wall cladding with marine plywood and teak veneer(3-4mmth.) /Pine wood facing along with polishing of approved manufacture and priming coat on un ex-posed surface, necessary screws, etc. all complete: 09 mm-12mm thick
1
-
-
... More
Providing and fixing wall cladding with marine plywood and teak veneer(3-4mmth.) /Pine wood facing along with polishing of approved manufacture and priming coat on un ex-posed surface, necessary screws, etc. all complete: 12 mm-19mm thick
1
-
-
... More
Providing and fixing teak veneer (3-4 mm) / pine wood facing along with polishing of approved make and priming coat on unexposed surface with necessary screws etc. all as directed by engineer in- charge.
5
-
-
... More
Providing and fixing 1st class Indian teak wood moulded beading to door and window frames with aluminium screws, plugs and priming coat on unexposed surface etc upto 50mm wide and up to 25 mm thick.
6
-
-
... More
Providing & applying wood polishing in all wood works such as Pelmets; Door/Window shutters; Beading; Staircase railings; Wall claddings; office furniture etc. including all scaffolding; scrapping; wood sealers etc. complete; French colour polishing in three or more coats.
21
-
-
... More
Providing & applying wood polishing in all wood works such as Pelmets; Door/Window shutters; Beading; Staircase railings; Wall claddings; office furniture etc. including all scaffolding; scrapping; wood sealers etc. complete; Melamine spray polishing over French colour polish.
11
-
-
... More
Providing and fixing of SS friction stay to Z- Section type openable window including removing & refixing the shutters, alignment & greasing the same; screws etc. complete. Size as per existing window / ventilator requirement.
2
-
-
... More
Providing and fixing of colour anodised aluminium accessories in windows/door/ventilators etc. as per existing size and colour including removing old fittings; screws etc complete: Handle with locking arrangement; screws etc complete as per existing size.
1
-
-
... More
Providing and fixing of colour anodised aluminium accessories in windows/door/ventilators etc. as per existing size and colour including removing old fittings; screws etc complete: Handle 75mm - 100mm
2
-
-
... More
Providing and fixing of colour anodised aluminium accessories in windows/door/ventilators etc. as per existing size and colour including removing old fittings; screws etc complete: Handle 125mm- 200mm
1
-
-
... More
Providing and fixing of colour anodised aluminium accessories in windows/door/ventilators etc. as per existing size and colour including removing old fittings; screws etc complete: Aluminium door concealed Locks with three keys as per existing arrangement.
4
-
-
... More
Providing and fixing of colour anodised aluminium accessories in windows/door/ventilators etc. as per existing size and colour including removing old fittings; screws etc complete: Providing and fixing PVC/ aluminium domal section wheel bearings of approved brand for aluminium sliding doors/ sections (two/ three track wheels) along with removing of existing bearings, including all necessary fittings etc. complete as per direction of engineer in- charge.
10
-
-
... More
Providing and fixing Aluminium section concealed sliding window push lock of approved make, made of pressure die cast in zinc alloy with powder coating of approved shade of required size, including all necessary fittings etc. complete as per direction of engineer in- charge: 180 x 23 mm
5
-
-
... More
Providing and fixing Aluminium section concealed sliding window push lock of approved make, made of pressure die cast in zinc alloy with powder coating of approved shade of required size, including all necessary fittings etc. complete as per direction of engineer in- charge: 100 x 23 mm
5
-
-
... More
Removing; Servicing; Oiling & Refixing of existing hydraulic door closers including providing & fixing any spares & accessories; screws etc. complete.
5
-
-
... More
Providing and fixing new Hydraulic door closer (DOORSET/ OZONE / HAFALE) including removing of old set. Size includes long arm/ short arm heavy duty type to the satisfaction of Engineer: long arm
1
-
-
... More
Providing and fixing new Hydraulic door closer (DOORSET/ OZONE / HAFALE) including removing of old set. Size includes long arm/ short arm heavy duty type to the satisfaction of Engineer: short arm
4
-
-
... More
Removing, Cleaning, scrubbing of existing damaged Sun Control Film in Glazed Windows & doors & providing & refixing of new film as per glazing size & of approved make, shade and visible light transmission (VLT) at all heights etc. with complete & as directed by the Engineer in Charge. Note: Payment as per actual filmed surface area on site.: Tinted sun control film with VLT 20%, 40%, 60% and 80%
22
-
-
... More
Removing, Cleaning, scrubbing of existing damaged Sun Control Film in Glazed Windows & doors & providing & refixing of new film as per glazing size & of approved make, shade and visible light transmission (VLT) at all heights etc. with complete & as directed by the Engineer in Charge. Note: Payment as per actual filmed surface area on site.: Total blackout sun control film with VLT 0%
22
-
-
... More
Removing, Cleaning, scrubbing of existing damaged Sun Control Film in Glazed Windows & doors & providing & refixing of new film as per glazing size & of approved make, shade and visible light transmission (VLT) at all heights etc. with complete & as directed by the Engineer in Charge. Note: Payment as per actual filmed surface area on site.: Reflective sun control film
22
-
-
... More
Removing, Cleaning, scrubbing of existing damaged Sun Control Film in Glazed Windows & doors & providing & refixing of new film as per glazing size & of approved make, shade and visible light transmission (VLT) at all heights etc. with complete & as directed by the Engineer in Charge. Note: Payment as per actual filmed surface area on site.: Opaque sun control film
22
-
-
... More
Providing & fixing vertical blackout Blinds(75mm) as per existing window size including all necessary fittings in top rail, sliding chains, weights, Side overlap over window size, etc all as per approved manufacturer's specification & to the satisfaction of the Engineer in Charge. Note: Clear window size to be measured for payments.
17
-
-
... More
Providing & fixing total blackout roller blinds (75mm) as per existing window size including all necessary fittings in top rail, sliding chains, weights, Side overlap over window size, etc all of approved make and as per manufacturer's specification & to the satisfaction of the Engineer in Charge. Note: Clear window size to be measured for payments.
17
-
-
... More
Providing & Fixing Pin-up Board using cork soft board with fabric cost not less than Rs. 150/- /m on one side of ply with necessary TW/aluminium beading/framing around, SR adhesives, Nails, hanging clips etc all as per approved sample / colour / brand complete. All exposed faces of TW / beading / Lipping should be finished with spray melamine polishing to required shade. Termite treatment shall be done for all wooden & ply members : Customized pin -up board as per above description
2
-
-
... More
Providing & Fixing Pin-up Board using cork soft board with fabric cost not less than Rs. 150/- /m on one side of ply with necessary TW/aluminium beading/framing around, SR adhesives, Nails, hanging clips etc all as per approved sample / colour / brand complete. All exposed faces of TW / beading / Lipping should be finished with spray melamine polishing to required shade. Termite treatment shall be done for all wooden & ply members : Readymade pin -up board of CORES or equivalent brand
2
-
-
... More
Providing & fixing white writing board of 19mm marine grade plywood & finished with 1.5mm white marker board laminate & sides finished with TW lippings / beading/framing as directed. All exposed faces of TW beading / Lipping should be finished with spray melamine polish to required shade. Termite treatment shall be done for all wooden & ply members: Customized white board as per above description
2
-
-
... More
Providing & fixing white writing board of 19mm marine grade plywood & finished with 1.5mm white marker board laminate & sides finished with TW lippings / beading/framing as directed. All exposed faces of TW beading / Lipping should be finished with spray melamine polish to required shade. Termite treatment shall be done for all wooden & ply members: Readymade magnetic white board of CORES or equivalent brand
2
-
-
... More
Providing & filling the gaps in between aluminium frame & adjacent RCC/ Brick / CC Block / Stone works by providing (Gap fill) of Asian paint smart care universeal (clear) Single-component, ready to use, moisture curing, silicone based adhesive sealant at the joint between window frame and window sill upto 10mm depth & 5mm width & as per direction of the Engineer in Charge etc. complete.
20
-
-
... More
Providing & filling the gaps in between aluminium frame & adjacent RCC/ Brick / CC Block / Stone works by providing sealant of approved brand Single-component, ready to use, moisture curing, polyurethane (PU) based adhesive sealant at the joint between RCC structure, masonry, stone work, etc. upto 10mm depth & 5mm width & as per direction of the Engineer in Charge etc. complete.
20
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with PVC/neoprene gasket etc complete as per the directions of Engineer In-Charge. With float glass panes of 5.5 mm thickness
1
-
-
... More
Providing and fixing 8 -10 mm edge moulded float glass on working tables of any shape and size as per the directions of Engineer in Charge.
10
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S sheet outer box with slide plate etc complete (with stainless steel cover plate)
3
-
-
... More
Providing and fixing of Brass door stoppers as per the approved make and as per existing ones etc complete
6
-
-
... More
Providing and fixing of Brass door handle as per the approved make and as per existing ones etc complete
1
-
-
... More
Providing and fixing SS Telescope Ball Bearing Drawer/ keyboard channel of size 250 MM/ 10 Inch or available in suitable size of approved brand by replacing old one.
2
-
-
... More
Providing and assembling of wooden partition, made of 50x50 mm Sal wood battens spaced at 600 mm c/c horizontally and vertically, fixed with 9 mm marine ply on both the sides and finished with 1 mm thick laminate on both sides of approved make and shade. The partition to be provided with 8 mm thick transparent float glass with etching strips throughout the length including doors as shown in the drawing. The door will be 50 mm thick made of second-class teak wood with transparent float glass and ply with laminate, details as per the drawing, including all hardware i.e. SS handles, locks, hinges, tower bolts, door closer, etc complete. Painting with oil type wood preservative of approved brand and manufacture. The door to be polished (min 3 coats) with melamine polish. as per approved make and as directed by the Engineer In charge and per given Drawing.
1
-
-
... More
Providing and fixing plain marine plywood plain lining with necessary screws, priming coat on unexposed surface etc. complete for : 6-12mm
6
-
-
... More
Providing and fixing plain marine plywood plain lining with necessary screws, priming coat on unexposed surface etc. complete for : 19mm
16
-
-
... More
Providing and fixing of 1 mm thick decorative laminate of approved brand on surface of plywood by using specified adhesive etc. all complete
30
-
-
... More
Providing and fixing factory made single extruded WPC (wood polymer composite) solid board of required size and thickness, with one side white colour and other side of board laminated with PVC sheet of approved design pasted with hot melt adhesive for cupboards, work stations and bathroom/ kitchen cabinets, etc. complete as per direction of Engineer in- charge: 6-12mm
10
-
-
... More
Providing and fixing factory made single extruded WPC (wood polymer composite) solid board of required size and thickness, with one side white colour and other side of board laminated with PVC sheet of approved design pasted with hot melt adhesive for cupboards, work stations and bathroom/ kitchen cabinets, etc. complete as per direction of Engineer in- charge: 19mm
10
-
-
... More
Providing and fixing factory made MDF (Medium density fibre) solid board of required size and thickness, with one side white colour and other side of board laminated with PVC sheet of approved make and design, etc. complete as per direction of Engineer in- charge: 6-12mm
10
-
-
... More
Providing and fixing factory made MDF (Medium density fibre) solid board of required size and thickness, with one side white colour and other side of board laminated with PVC sheet of approved make and design, etc. complete as per direction of Engineer in- charge: 19mm
10
-
-
... More
Providing and fixing polyurethane foam for cushioning of chairs, stools, benches, etc. of approved make of density 40/ 50/ 60 kg/m3 and of thickness 50 mm to 75 mm including providing Rexene cover for the foam cushion with zip arrangement, etc. complete as per direction of Engineer in- charge.
5
-
-
... More
Providing and fixing PVC/ PU Rexene for indoor and outdoor furniture cushioning of approved thickness, make and shade along with removing of existing one, including provision for removing and refixing of the Rexene for maintenance purpose, with required tools, adhesives and labours, etc. complete as per direction of engineer in- charge.
5
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
5
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
2
-
-
... More
Providing and fixing SS toughened glass door locks and other SS fittings, of required size and type and of approved make, along with removing of old fitting, including fixing with all necessary fittings etc. complete as per direction of engineer in- charge: Glass to Glass Lock Round type
5
-
-
... More
Providing and fixing SS toughened glass door locks and other SS fittings, of required size and type and of approved make, along with removing of old fitting, including fixing with all necessary fittings etc. complete as per direction of engineer in- charge: Bottom lock for glass door
5
-
-
... More
Providing and fixing SS toughened glass door locks and other SS fittings, of required size and type and of approved make, along with removing of old fitting, including fixing with all necessary fittings etc. complete as per direction of engineer in- charge: Corner patch fitting for glass door
5
-
-
... More
Providing and fixing SS- 316 grade toughened glass door handles of C, D, H shape or required size and of approved make along with removing of existing fitting, including tools, tackles, labour and fixing the same with all necessary fittings, etc. complete as per direction of engineer in- charge: 300 mm
2
-
-
... More
Providing and fixing SS- 316 grade toughened glass door handles of C, D, H shape or required size and of approved make along with removing of existing fitting, including tools, tackles, labour and fixing the same with all necessary fittings, etc. complete as per direction of engineer in- charge: 450 mm
2
-
-
... More
Providing and fixing SS- 316 grade toughened glass door handles of C, D, H shape or required size and of approved make along with removing of existing fitting, including tools, tackles, labour and fixing the same with all necessary fittings, etc. complete as per direction of engineer in- charge: 600 mm
2
-
-
... More
Providing and fixing SS- 316 grade toughened glass door handles of C, D, H shape or required size and of approved make along with removing of existing fitting, including tools, tackles, labour and fixing the same with all necessary fittings, etc. complete as per direction of engineer in- charge: 900 mm
2
-
-
... More
Supply and installation of F U H Shape Silicone rubber strips for sealing glass doors of 6-12mm thickness.
1
-
-
... More
FLOORING AND FLOOR FINISHES:
-
-
-
... More
Providing and fixing coloured ceramic tiles in different sizes for flooring, dado, skirting over 20mm thick cement mortar1:4 and jointed with confirming to IS 13755 of NITCO, SOMANY, KAJARIA necessary pigments with first quality tiles necessary pigments with first quality tiles: size 30x30 cm for flooring
25
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc in pipeline tranches and other foundations complete
2
-
-
... More
Providing and laying mirror factory polished granite of 12mm thick for flooring and dado over 20 mm thick base of cement mortar 1:4 (1 cement:4 sand) laid over and joined with cement slurry including moulding, rubbing, polishing etc, complete
1
-
-
... More
Cleaning, Scrubbing & Repolishing of existing Flooring & Skirting in kotha/Marble to provide mirror polish image by machine polishing including cost of mobilising/demobilising the polishing machine to site etc. complete & as directed by the Engineer in Charge. Note: Plan area to be measured for Flooring, Skirting, Risers, Treads etc for payments.
1
-
-
... More
Providing and laying homogeneous 2 mm thick vinyl sheet in flooring and skirting in approved pattern and of approved brand on a smooth and damp-proof base using VOC free water-based adhesive of approved make including rolling with light wooden roller weighing about 5 kg all complete and joints shall be thermo welded with matching HDPE welding rods (4mm) provided by the manufacturer. The floor finish shall terminate at the room perimeter passing over a flexible PVC/ rubber profile which shall provide a neat cove allowing floor covering to be dressed up the wall to form a skirting and support floor covering at the weak point, including labour, tools, equipments, etc. complete as per direction of Engineer in- charge.
1
-
-
... More
Providing and laying homogeneous 2 mm thick acid-resistant vinyl sheet in flooring and skirting in approved pattern and of approved brand on a smooth and damp-proof base using VOC free water-based adhesive of approved make including rolling with light wooden roller weighing about 5 kg all complete and joints shall be thermo welded with matching HDPE welding rods (4mm) provided by the manufacturer. The floor finish shall terminate at the room perimeter passing over a flexible PVC/ rubber profile which shall provide a neat cove allowing floor covering to be dressed up the wall to form a skirting and support floor covering at the weak point, including labour, tools, equipments, etc. complete as per direction of Engineer in- charge.
1
-
-
... More
Providing and fixing 18mm thk approved make / Jet Black shade mirror finished Granite slabs for Kitchen Counter Tops/ Stiffeners / Facade /Table counter top etc of 27" x 118" size in approved shape/ pattern / sink cutouts including cement mortar bedding 20mm thk (1:6), laying the slabs in cement paste or gloved with High strength tile adhesive including roughing of existing Kota top, in proper level and slope, filling the joints with cement / pigments etc complete as directed. Adhesive confirming to IS: 15477, using 5kg per sqm of the tile area, in average 3mm thickness. Cost of Granite should not be lesser than Rs. 250/- sq.ft.
1
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar (1:4(1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
1
-
-
... More
Fixing glazed/ceramic /vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, using 5 kg adhesive per sqm of tile area, in average 3 mm thickness
1
-
-
... More
Providing and application of cement base single component polymer modified tile grout of approved brand and shade for filling tile joints upto 5 mm wide at floors and walls including cleaning of joints before application with tools, equipments labours, etc. complete as per direction of Engineer in- charge. The grout should be water repellent and should be impermeable. The joints should be cleaned before application and should be free from oil and dust particles along with saturation of joints before application.
1
-
-
... More
Providing and application of two component epoxy resin based tint able tile grout of approved brand and shade for filling tile joints at floors and walls including cleaning of joints before application, mixing of base and harder in appropriate mixing ratio, using tint able material for mixing in base to achieve required shade and the tinted base to be mixed with harder for application along with tools, equipments, labours, etc. complete as per direction of Engineer in- charge. The grout should be water repellent and should be impermeable.
1
-
-
... More
Providing and fixing Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mortar 1:4 (1 cement: 4 coarse sand) and with suitable proportion of pigment to match the shade of tiles, including rubbing and cleaning etc.
1
-
-
... More
Providing and fixing factory-made heavy duty chequered industrial/ parking tiles 20 mm thick at floor level for parking areas, of approved make in all colours and shades, laid on 20mm thick cement mortar (1:4(1 cement :4 coarse sand) including grouting the joints with epoxy grout and matching pigments etc. complete as per direction of engineer in- charge.
1
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks of M-30 grade , 60mm to 80mm thick in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
1
-
-
... More
Providing and laying of wooden laminate flooring with SPC (Stone Polymer Composite) boards of 8 mm thickness (AC-4) of approved make and shade with levelled smooth and finished flooring along with systematically cutting of grooves in floors for concealing cables travelling on floor surface, complete including all necessary fittings and fixtures, labours, tools, equipments, etc. all complete as per direction of engineer in- charge.
1
-
-
... More
Providing and laying chemical epoxy flooring at floor level of approved brand as per manufacturers specifications as stated below: Prepare the substrate by suitable means e.g. by Scarifier/ shot blasting /milling / mechanical grinder followed by vacuum until the desired level of substrate is available. Apply primer coat with putty knife/roller by mixing properly base with hardener in the ratio of 65:35 by weight to achieve an even layer of 75 – 125 microns thickness. The mixed quantity should be utilised within 60 minutes after adding harder and should be allowed to dry for 24 hours. Apply screed coat/ underlayment coat by mixing base, hardener & aggregates in the ratio of 18.5: 9.5: 72 by weight and apply by using notch trowel, followed by spike roller to achieve an even surface of 2000 microns thickness. The mixed quantity should be utilised within 30 minutes after adding harder and should be allowed to dry for 24 hours. Apply sealer coat/ scratch coat by mixing base, hardener & Aggregates in the specified ratio with Putty knife to achieve an even surface of 100 microns thick. The mixed quantity should be utilised within 30 minutes after adding harder and should be allowed to dry for 8 hours. Apply topcoat by mixing base, hardener & Aggregates in the ratio of 24: 13: 63 by weight and apply using notch trowel, followed by spike roller to achieve an even smooth surface of 1000 microns thickness. The mixed quantity should be utilised within 30 minutes after adding harder and should be allowed to dry for 24 hours, followed by 7 days of water curing.
1
-
-
... More
PLASTERING AND FINISHINGS:
-
-
-
... More
18mm cement plaster in 2 coats under layer 12 mm thk. cement plaster 1:3.5 (1 cement: 3.5 coarse sand) and top layer 6 mm thk. With cement plaster 1:2.5 (1 cement: 2.5 coarse sand) finished with sand faced sponge finish at all heights, External plaster including waterproofing compound in the proportion recommended by the manufacturers per bag of 50 kg of cement used in mix & as Approved by The Engineer- In -charge in both coats of plaster. Job involves cleaning the dismantled plaster surface with wire brush & water jetting & filling the joints with Sika Quick 1000 in addition with polymer Sika Latex Power in 1:3 ratio with water, to fill the joints between concrete blocks and RC columns/beams and concrete blocks. Sika Quick 1000 is a single component, rapid hardening, early strength gaining, cementitious, repair material for concrete. The treatment will include opening of joints by 1" X 1", cleaning it with water, application of bond coat, application of quick sika mortar by hand. Approved water proofing components Make: Dr. Fixit/Sika/FOSROC
45
-
-
... More
12mm cement plaster in one coat in internal walls/ceilings in CM 1:4 at all heights including waterproofing compound in the proportion recommended by the manufacturers per bag of 50 kg of cement used in mix & as Approved by The Engineer- In -charge
60
-
-
... More
PAINTING AND FINISHING WORKS:
-
-
-
... More
Providing & Distempering in OBD in 2 or more coats, Asian, Nerolac or approved brand of required shades on old work including one or more coats of necessary primer, scraping, applying lambi putty, levelling and filling crack etc. to give an even shade including scrapping & surface preparation, scaffolding etc complete at all heights.
1
-
-
... More
Painting (Two or more coats) with washable emulsion (plastic) paint of Asian paints Apcolite advance heavy duty emulsion or approved equivalent brand on Internal walls including one or more coats of necessary primer, scraping, applying lambi putty, levelling and filling crack etc. all as directed including all materials, labour, scaffoldings, brushes, tools, equipments etc., complete
1000
-
-
... More
Providing & applying two or more coats synthetic enamel paint of approved brand including one or more coats of necessary primer in all shades to give an even shade etc. complete in walls/ ceilings/ grills / wood works etc. to give an even shade including scrapping & surface preparation, scaffolding etc complete at all heights.
50
-
-
... More
Providing & applying three or more coats synthetic PU enamel paint of approved brand including one or more coats of necessary primer in all shades to give an even shade etc. complete in walls/ ceilings/ grills / wood works etc. to give an even shade including scrapping & surface preparation, scaffolding etc complete at all heights.
10
-
-
... More
Providing and painting (Three coats (01 base coat and 02 paint coat)) on old work with waterproof acrylic emulsion paint on external wall, applying coat of primer of approved make, colour and shade to give an even finish, all as directed including all materials, labour, scaffoldings, brushers, tools, equipments, etc. complete as directed by Engineer in- charge. The product should provide superlative waterproofing capabilities and should form an effective barrier against water penetration. It should have higher elongation and should include fibre reinforcement thereby offering crack bridging ability of up to 2.4 mm at 175 - 225 microns. Application methodology: On old painted surface it should provide forced coverage of: 01 coat of basecoat covering 3.5 sq. m/ltr without dilution and 02 coats of topcoat 5– 6 sq. m/ltr (40% dilution).
700
-
-
... More
Providing and applying of Sika Quick 1000 in addition with polymer Sika Latex Power in 1:3 ratio with water, to repair the cracks. The mix will be hand applied. Sika Quick 1000 is a 1-component, rapid hardening, early strength gaining, cementitious, repair material for concrete. The treatment will include opening of joints by 1" X 1", cleaning it with water, application of bond coat, application of quick sika mortar by hand & as directed by the Engineer in Charge. Approved Make: Dr. Fixit/Sika/FOSROC
50
-
-
... More
Providing & Finishing Exterior wall with superior quality, High performance elastomeric decorative exterior waterproofing coating of approved brand and manufacture and of required shade on new/old work (two or more coats @ 3.25 lit. / sqm) to give an even shade including scrapping of old existing paints wherever necessary & required primers (1:2)(water: primer) in as many coats as required as per manufactures specification etc complete. Sika Gard - 550 W Elastic one component, plasto-elastic coating based on UV - curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0 deg Cent. Application of primer. Sika Gard 551 elastic is a one component, solvent containing primer for all kinds of concrete as well as plaster surfaces. Consumption of primer. 0.20 to 0.25 Kg/m2. Setting time. 6 Hours. Application of 1st coat of Sika Gard 550 W elastic. Consumption 0.30 Kg/m2. Waiting time 6 Hrs. Application of 2nd coat of Sika Gard 550 W elastic. Waiting time 6 Hrs. Note: Rate of Paint Consumption/Coverage /Work methodology/Procedure/Paint Gauge/shelf life of coating etc all as per Manufactures Guidelines/Manuals & as directed by the Engineer in Charge. Dr. FXIT (Rain coat) / FOSROC / SIKA. All window frames / shutters / glass panes shall be protected by masking tape & cleaned / removed after final spray coating. No extra measurements shall be done for coating door / window / opening jams.
100
-
-
... More
Applying priming coat with ready mixed primer of approved listed brand and manufacture on wood work complete in shutters & frames including scraping & removing existing paints at all heights etc complete.
1
-
-
... More
Painting (two or more coats) with Epoxy paint on metal surfaces with epoxy primer application as per manufacturer standards of approved brand & manufacture to give an even shade (on shutters, grills, wall, Street light poles, etc.) including scrapping of existing metal surface with sand paper/ wire brush, labours, tools, equipment, etc. complete at all heights and as per direction of engineer in- charge.
150
-
-
... More
Providing and painting with acrylic emulsion paint on roof Mangalore tiles, for two or more coats, of approved brand, shade and manufacture, including scrapping and washing of the tiles with water jet, applying additional coats wherever required, to achieve even shade and color, labor, tools, equipments, etc. complete as per direction of Engineer in- charge.
100
-
-
... More
Providing and painting two or more coats with acrylic emulsion paint on footpaths at floor level, having VOC (Volatile Organic Compound) content less than 50 grams/ Liter, of approved brand, shade and manufacture, including scrapping and washing of the tiles with water jet, applying additional coats wherever required, to achieve even shade and colour, labour, tools, equipments, etc. complete as per direction of Engineer in- charge.
100
-
-
... More
DEPARTMENTAL SERVICES:
-
-
-
... More
labour charges for engaging on daily wage along with necessary self-owned Tools; Tackles & Machinery : Helper / Male coolie (General)
1
-
-
... More
labour charges for engaging on daily wage along with necessary self-owned Tools; Tackles & Machinery : Carpenter Furniture Skilled
1
-
-
... More
labour charges for engaging on daily wage along with necessary self-owned Tools; Tackles & Machinery : Plumber Skilled
1
-
-
... More
labour charges for engaging on daily wage along with necessary self-owned Tools; Tackles & Machinery : Mason Skilled
1
-
-
... More
labour charges for engaging on daily wage along with necessary self-owned Tools; Tackles & Machinery : Fitter / Technician Highly skilled - Floor Springs / Door closers / Venetian Blinds / Chair Repairs, Welders, Carpenter Aluminium Fabrication Skilled etc.
1
-
-
... More
MISCELLANOUS WORKS:
-
-
-
... More
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass of approved quality 6 mm thk, fixed to wall dado tiles by SS brush finished brass button type glass holders with C.P. brass screws and washer, pvc plugs etc, complete & to the satisfaction of the Engineer In Charge. MODI / ASSI
2
-
-
... More
Supply and fixing Precast reinforced concrete Gutter /drainage covers complete with lifting hooks including reinforcement and centring and shuttering and finished with plaster: 1000x900x100 mm
1
-
-
... More
Supply and fixing Precast reinforced concrete Gutter /drainage covers complete with lifting hooks including reinforcement and centring and shuttering and finished with plaster: 1000x600x100 mm
1
-
-
... More
Providing and fixing stainless steel Single sinks of one- piece 304 grade of 1.6 mm thick of overall size 689mm x 535 mmx 254mm in Anti Scratch finish/quality inclusive of SS/CP waste coupling, fixing materials and connection piece in CPVC piping in 40/50mm dia., treaded End Cap etc complete. NIRALI / HINDWARE / FRANKE
1
-
-
... More
Providing, fabricating and fixing to existing Man hole / Chamber covers with frames and suitable locking arrangement, holdfasts, lifting handles, etc. Frames to be in MS 50mm x 50mm x 6mm & Cover door in GI (14gauge) plate fabricated with MS flat 50mm x 50mm x 6mm, equal angle 50mm x 50mm x 6mm as necessary supports including two coats of approved epoxy primer & two coats of epoxy synthetic enamel etc. Existing chambers to be repaired in brick masonry / plaster / concrete etc complete to make good the job & to the satisfaction of the Engineer. Cover Size: 300mm x 300mm
2
-
-
... More
Providing, fabricating and fixing to existing Man hole / Chamber covers with frames and suitable locking arrangement, holdfasts, lifting handles, etc. Frames to be in MS 50mm x 50mm x 6mm & Cover door in GI (14gauge) plate fabricated with MS flat 50mm x 50mm x 6mm, equal angle 50mm x 50mm x 6mm as necessary supports including two coats of approved epoxy primer & two coats of epoxy synthetic enamel etc. Existing chambers to be repaired in brick masonry / plaster / concrete etc complete to make good the job & to the satisfaction of the Engineer. Cover Size: 600mm x 600mm
2
-
-
... More
Providing, fabricating and fixing to existing Man hole / Chamber covers with frames and suitable locking arrangement, holdfasts, lifting handles, etc. Frames to be in MS 50mm x 50mm x 6mm & Cover door in GI (14gauge) plate fabricated with MS flat 50mm x 50mm x 6mm, equal angle 50mm x 50mm x 6mm as necessary supports including two coats of approved epoxy primer & two coats of epoxy synthetic enamel etc. Existing chambers to be repaired in brick masonry / plaster / concrete etc complete to make good the job & to the satisfaction of the Engineer. Cover Size: 1200mm x 1300mm
1
-
-
... More
Using cement Bags in works ISI Mark (50Kg Bag) and as per approved make and satisfaction of engineer in charge
1
-
-
... More
Using Sand as per approved make and satisfaction of engineer in- charge.
1
-
-
... More
Providing chuna of (25 kg bag) with ISI marking of approved make and satisfaction of engineer in- charge.
1
-
-
... More
Providing and fixing of locks for cupboards (overhead and below counters) as per approved make etc complete
5
-
-
... More
Providing and installation of overhead sintex tanks at all heights and making proper plumbing connections from the existing water supply lines etc complete : 1000 ltrs capacity
1
-
-
... More
Providing and installation of overhead sintex tanks at all heights and making proper plumbing connections from the existing water supply lines etc complete : 1500 ltrs capacity
1
-
-
... More
Providing and installation of overhead sintex tanks at all heights and making proper plumbing connections from the existing water supply lines etc complete : 2000 ltrs capacity
1
-
-
... More
Removing carefully damaged false ceiling and providing and redoing the false ceiling in Gypsum board in existing thickness including necessary supports/runners/perimeter channels etc complete and finishing the surface to all levels/line to the satisfaction of the engineer in charge
1
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side runner with suitably spaced joints to get required length and of size 24x38 mm made inclusive) consisting of main "T" from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge: 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with give stable crystalline structure with minimum compressive strength 225 kg/ sq. cellulose fibre manufactured through autoclaving process to bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non-woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.
1
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side runner with suitably spaced joints to get required length and of size 24x38 mm made inclusive) consisting of main "T" from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge: 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with give stable crystalline structure with minimum compressive strength 225 kg/ sq. cellulose fibre manufactured through autoclaving process to bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non-woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.
1
-
-
... More
Steel work in single sections including cutting, hoisting, welding fixing in position and applying a priming coat of red lead paint. In R.S. joists, channels, angles, tees, tubes, pipes
100
-
-
... More
Steel work in single sections including cutting, hoisting, welding fixing in position and applying a priming coat of red lead paint. In flats of all sizes
20
-
-
... More
Steel work in single sections including cutting, hoisting, welding fixing in position and applying a priming coat of red lead paint.In Sheets of all sizes and thickness
100
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 304 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge. In R.S. joists, channels, angles, tees, tubes, pipes
100
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 304 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge.In flats of all sizes
20
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 304 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge.In Sheets of all sizes and thickness
100
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 316 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge. In R.S. joists, channels, angles, tees, tubes, pipes
100
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 316 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge.In flats of all sizes
20
-
-
... More
Providing, fabricating and fixing in position stainless steel work of 316 grade in single sections including cutting, hoisting, welding and providing surface finish by buffing in matte or polished finish, including all tools, equipments and labours, etc. complete as per direction of engineer in- charge.In Sheets of all sizes and thickness
100
-
-
... More
Providing and fixing of Galvanized sheets according to ASTM specification on A792/A792M-97a "Steel sheet, 55% aluminium-Zinc alloy coated by Hot Dip process of approved colour and make etc complete
10
-
-
... More
Providing and fixing of Bird Control Spikes on beams, rafters, railings, window air conditioners, signs, windowsills, gutters, roof perimeters, support structures, chimneys etc. Made from Virgin UV stabilized poly-carbonate engineering polymer of approved colour and make and fixing the same by binding wires of SS 304/ aluminium/ GI material, etc. complete as per direction of engineer in- charge.
50
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately): Anodised aluminium
1
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately):Powder coated (minimum thickness of powder coating 50 micron)
1
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately):Providing and fixing aluminium diamond shaped Jaali of approved make for ventilation purpose in partition, openings, doors, etc. including fixing with SS screws by drilling holes with necessary tools, labours, equipments, etc. complete as per direction of engineer in- charge.
1
-
-
... More
Providing and fixing in position concave/ convex safety mirrors besides roadways of approved make, quality and size including fixing with necessary SS anchor bolts or screws, with all necessary fittings, etc. complete as per direction of engineer in- charge
2
-
-
... More
Providing and fixing of sign board of 5 mm thick acrylic board with computer cut self-adhesive as per approved colour vinyl graphics /artwork /letter pasted on it. The sign board will be fixed to the wall /door by means of mirror screw as per the given drawing and directed by Engineer in charge.
10
-
-
... More
Providing and fixing of sign board made of 5 mm thick aluminium composite panel back sheet with computer cut self-adhesive as per approved colour vinyl graphics /artwork /letter pasted on it. The sign board will be fixed to the wall /door by means of mirror screw, hanging chain (for particular board only) as per the given drawing and directed by Engineer in charge.
1
-
-
... More
Providing and fixing PVC keyboard tray with mouse pad of approved make and shade along with powder coated aluminium channels, along with fixing the same with SS screws including all tools and labour, etc complete as per direction of engineer in- charge.
1
-
-
... More
Providing chemical drain cleaning powder (Container) for clearing clogging and blockage of drains in basins, urinals, etc. of approved make and as per satisfaction of engineer in- charge.
1
-
-
... More
Cleaning of existing office chair fabrics, leather, Rexene, etc covers along with its armrest including labour, tools, equipments, chemicals etc. complete as per direction of engineer in charge.
1
-
-
... More
Providing and fixing magnetic catch lock 8mm, 10mm slots with PVC housing and steel counter piece of approved make including fixing with SS screws and all necessary fittings along with labours, tools, etc. complete as per direction of engineer in charge.
1
-
-
... More
Providing, mixing and spraying of weed killer chemical for killing unwanted weed growth of approved make with appropriate mixing proportion as mentioned by the manufacturer including labour, tools, equipments, etc. complete as per direction of Engineer in- charge.
10
-
-
... More
Providing and fixing PVC cable manager of size 65mm/ 2.5 inch, for office tables of approved make, along with cutting hole in table top of particle board/ plywood with glass top using core cutter, including labour, tools, equipments etc. complete as per direction of Engineer in- charge.
1
-
-
... More
Providing of brass padlocks of 5, 6, 7 levers of approved make with 3 keys for locking of doors, etc. complete as per direction of engineer in- charge.
1
-
-
... More
Providing and fixing rubber speed humps of approved make and pattern, on floor level for vehicular speed control 50 mm thick and 350 mm wide with providing a spacing of 200 mm between each row of the hump including drilling holes in ground and fixing the same with SS screws will all tools, labour, equipments, etc. Complete as per direction of engineer in- charge.
50
-
-
... More
Providing and fixing reflective slip resistant staircase tread strip at floor lever of approved make and shade of size 50 mm width, fixed at staircase tread nose along with appropriate adhesives of approved make, including all labour, tools, equipments, etc. complete as per direction of engineer in- charge.
10
-
-
... More
Providing and fixing on wall surface acoustic cladding panels of size and shade as per existing ones or as approved by engineer in- charge, of approved make including fixing with necessary fittings or locking system, labours, tools, equipments, etc. complete as per direction of engineer in- charge.
10
-
-
... More
Providing and application of Fibre reinforced polymer treatment in two or more coats, for the exposed surface of metal structures of approved make, including mixing of resin and hardener in required proportions as specified by the manufacturer along with mixing of colour pigment of approved shade if required. Application procedure involves cleaning of the existing metal surface by wire brush and water, drying the surface, application of 1st coat of FRP, allowing to dry, application of second coat of FRP, allowing to dry, including labour, tools, equipmennts, etc. complete as per direction of Engineer in- charge.
10
-
-
... More
Providing and fixing in position powder coated aluminium rectangular louvers not exceeding 0.2 sqm in all type of flush doors with size and location as specified by Engineer in- charge, including all necessary fitting and making good the same, etc. complete as per direction of Engineer in- charge.
5
-
-
... More
Providing and fixing of moisture resistant/fire resistant cement fibre board 8 mm thick, of approved make and required size, fixed with stainless steel self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm, etc, including labour, tools, equipment, etc. complete as per direction of Engineer in- charge.
10
-
-
... More
Providing and fixing in position PVC Loft water tank of approved make, shape and size above toilets in washrooms with a volume of 500 lts including all necessary fittings, etc. complete as per direction of Engineer in- charge.
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Arena spare gas lift 120 mm class 4
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office table Lock T8/ T9
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair bottom mechanism
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge.Arena spares Castor wheels
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair seat cover
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Godrej wardrobe door lock
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Godrej pedestal/ drawer lock
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair star base
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Arena Gas lift (Short height)
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Drawer handle screw
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair back assembly
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair hand armrest
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office chair servicing
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. office wardrobe servicing
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge. Office pedestal / drawer servicing
1
-
-
... More
Providing and fixing Furniture spare parts of Godrej make, including tools, labour, equipments, etc. complete as per direction of Engineer in- charge.Office table servicing
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%