Ministry Of Road Transport And Highways Tender

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.)

Disposal of surplus excavated earth material including carriage by tipper truck within a lead of 2.00 kms.

Rubble packing with hard laterite stone under floors including watering, ramming & consolidating etc. complete

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge (75MM)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.

Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)

Laying reinforce cement concrete pipe NP4/ prestressed pipe for culvert 1000mm dia

Stone pitching of 22.5 cms thick using laterite stone of approved quality in cement mortar 1:5( 1 cement : 5 coarse sand) including supplying of stone and preparing surface etc. complete.

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.

Supply of Unskilled labour

Supply of 1st class (skilled)

Supply of Front end loader 1 cum bucket capacity

Supply of Tipper -5 cum/7 cum

Providing and laying of hot applied thermoplastic compound rumbler strips in two layers 2.5 mm thick each, top layer with reflectorising glass beads @ 250 gms per sqm area, total thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Supply and fixing of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. Pre Qualification warranty for 2 years for the Solar Raised Pavement Marker from manufacturer shall be submitted by the contractor along with the tender for technical qualification in the tender and the contractor shall also submit test reports from government laboratory/independent laboratory for Compressive Strength and Prevention of Dust & Water for technical qualification in the tender.

Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming to IRC-79 and the drawings.)

Type - B, Providing and erecting a "Thrie" metal beam crash barrier \providing and erecting "Thrie Beam " Crash barrier comprising of following three factory made unites-viz. 1) Thrie Beam 2) Spacer Block 3) Vertical Post. The Thrie beam 3mm thick cold roll formed guard rail raw material Conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255 Mpa which is fixed by bolted connection to spacer block C-channel of size 150mm* 75mm & 5mm thick, 54.6cm height spaced 2meter centre to centre, fixed to Vertical Post C-channel of size 150mm*75mm&5mm thick cold roll formed section made from HR coils raw material conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255MPa, with 85cms free height above road or Ground level, and embedded to 115cms deep in cement concrete block of size 35cm*35*115cm or as directed by Engineer Incharge, assembled & fixed as per drawings of MORTH&H Circular No.RW/NH/33022/1/94-DO/III, dated 24/6/1994 & construction operation as per 811 or revevant MORT&H specifications for Roads & Bridge Works (latest edition). All fittings (bolts, nuts, fasteners, washers etc.) shall be conforming to IS:1367 & IS:1364 & galvanished by hot dip zinc coated process @0.55kg/m2 conforming to relevent IS specifications all etc. complete

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting "C' type XI micro prismatic retro reflective material vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)etc complete as per MORT &H Specifications Fifth Edition. A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting "C' type XI micro prismatic retro reflective material vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)etc complete as per MORT &H Specifications Fifth Edition. A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting "C' type XI micro prismatic retro reflective material vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)etc complete as per MORT &H Specifications Fifth Edition. A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.

Providing & erection of 30watts solar panel (12VDC) Amber (Orange)Ccolor Polycarbonate lamp (300mm dia) Blinkers of 24 hrs backup including excavation & concreting in CC 1:2:4, as per the direction of engineer-in-charge in all respects.

Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

Prunning of trees leaning on road / structures using sawing machine or manually with controlled landing of the same using ropes, pillies etc. by ensuring traffic regulation, safety of moving vehicles, coomuters, labourers, structures along roadside, utility lines etc. and further chopping the cut branches on ground into required size of log etc with necessary cutting tools, plant & machinery. The serviceble & unserviceable material to be stacked separately within a lead of 100m. All works shall be carried out as of 1000m. All works shall be carried out as per direction of Engineer In charge.

Girth of tree from 300 mm to 600mm

Girth of tree from 600 mm to 900mm

Cutting of prunned tree including removal of stump, roots and levelling of ground with necessary cutting tools, plant & machinery & further chopping the cut tree on ground into pieces of required size of log etc. by ensuring safety of labourers, commuters, utility lines etc. The serviceable & unserviceable material to be stacked separately within a lead of 1000m. All works shall be carried out as per direction of Engineer In charge. a) Girth of tree from 300 mm to 600mm

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M20

Hire of crane of on per hr. basic as and when required for carry out monsoon related work like disposal of earth from side drains, cross drains, culverts, land slide etc. The hiring shall including entire cost of the operator, fuel, maintenance and repairs and all other requirement for the running of crane as directed by Engineer in charge etc. complete a) 80 tonnes

Supplying of granitic or basaltic stone soling of size 15-20 cm and Murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power roller including spreading waters and consolidation of binding material etc. complete.(Measurements shall be considered on finished item.and and layer of WBM of 50/75mm thick shall be taken seperately over this sub-base to obtain smooth surface, as per the directives of Engineer in-charge).

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-40@ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) including tack coat of bitumen VG-10 @ 0.375 Kg/m2 Grade -II (19mm nominal size). a) for Grading-II(19 mm nominal size)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-40@ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) including tack coat of bitumen VG-10 @ 0.375 Kg/m2 Grade -II (10mm nominal size). a) for Grading-II(10 mm nominal size)

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) i) By Manual Means:- a) In area of light jungle

Construction of embankement with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with Static roller to meet requirement of Table 300-2 as per MORTH specification 305

Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a) Size 1500 x 400 x 150 mm with reinforcement not less than 12 kg

Prunning of trees leaning on road / structures using sawing machine or manually with controlled landing of the same using ropes, pillies etc. by ensuring traffic regulation, safety of moving vehicles, coomuters, labourers, structures along roadside, utility lines etc. and further chopping the cut branches on ground into required size of log etc with necessary cutting tools, plant & machinery. The serviceble & unserviceable material to be stacked separately within a lead of 100m. All works shall be carried out as of 1000m. All works shall be carried out as per direction of Engineer In charge.

900mm Triangle - Cautionary Sign

600 mm Circle - Mandatory Sign

900mm Octagon - Mandatory Sign

600mm x 500mm Rectangle - Chevron Sign

300mm x 900mm Rectangle - Hazard Marker Sign

Providing & erection of 30watts solar panel (12VDC) Amber (Orange)Ccolor Polycarbonate lamp (300mm dia) Blinkers of 24 hrs backup on bridge including excavation & concreting in CC 1 :2:4, as per the direction of engineer-in-charge in all respects.

Hire of hydraulic excavator of 1 cum bucket (JCB) on per hr. basic as and when required for carry out monsoon related work like disposal of earth from side drains, cross drains, culverts, land slide etc. The hiring shall including entire cost of the operator, fuel, maintenance and repairs and all other requirement for the running JCB as directed by Engineer in charge etc. complete

Supplying of labours Semi-skilled (Bandhani, Mazdoor ) on per day basis as and when required for carryout Monsoon related work like clearing of bushes, dislting of cross drain, side drain, culverts etc., as directed by Engineer -in-Charge etc. complete