Military Engineer Services Tender

All as per Item No 2 here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.

All as per Item No 3 here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.

M&L 25mm thick cement concrete type B-0 (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified.

M & L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 complete all as specified and as directed.

S&F Glazed ceramic tiles 450X 350X 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing plaster in cement mortar 1:4 complete all as specifed .

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 15mmm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates, brackets etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified

Taking down and re-fixing of shutters in same opening exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified & as directed.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified

S&F looking mirror of size 600x450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers complete all as specified

S & F in repair brass cromium plated shower rose 125mm with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium plated screwed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified.

S & F in repairs for Bib taps fancy type, CP for iron pipe and fixed 15 mm bore complete all as specified.

S&F in repair Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions.

All as per item No 22 here-in-before but fancy type, chromium plated with long shank and cup (concealed type)

S&F PVC connection 15 mm size with PTMT nuts of lengths 450 mm, complete all as specified.

S & F in repairs health faucet CP (hand shower type) with shut off valve (thumb or fush button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet including taking down of old one.

S & F in repairs CP Soap dish size 160 x 160x90mm fixed to plugs with CP brass screws.

S&F in repair vitreous china wash basin, white ,flat back ,size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe.complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe,complete all as specified.

S&F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repair 32mm dia bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms)

S &F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges

S & F Grating square (SLIT) 150mm of PTMT. (Minimum weight 100 gms)

S & F in repair toilet paper holder of stainless steel of size 10.5 cm x 9cm fixed to walls with chromium plated (CP) brass screws as directed by Engineer in Charge.

S & F 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & as directed.

Taking down chowkats or frames n exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified & as directed.

S&F factory made PVC door frame of size 50 mm x 47 mmmade out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified & as directed.

M&L plain WPC door frame 100x50 Decorative including all fixing arrangements/accessories for fixing WPC shutter providing Brand Factory Made 30mm thick 100% solid WPC (Wood polymer Composite) Solid Plain flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade) Calcium Carbonate and natural Fibers (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbn having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & 1100 N (Edge). Minimimum Compressive Strengh of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Fee Water/Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as per direction of Engineer-in-Charge.

M&L plain WPC shutter 30mm thick with all fixing accessoried all as directed providing Brand Factory Made 30mm thick 100% solid WPC (Wood polymer Composite) Solid Plain flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade) Calcium Carbonate and natural Fibers (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbn having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & 1100 N (Edge)., Minimimum Compressive Strengh of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Fee Water/Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as per direction of Engineer-in-Charge.

S&F in repair 100mm butt hinges, medium weight, cold rolled mild steel.

S&F aluminium handles 100 mm long cast type, anodised complete all as specified and directed.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed.

Supply and fix 12mm thick toughened glass in squares exceeding 0.5 Sqm in each pane and ozone equivalent patch fitting complete all as specified and as directed. Note: Aluminium frame shall be measured and paid separately

S&F powder coated anodised aluminium frame for windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Minimum thickness of powder coating 50 micron)

Supply and fix stainless steel handle of 200mm size fixed on glass panel complete all as specified and as directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply and fixing core stainless steel lock for 12mm thick glass to glass door lock cutout CWCL-1.

M & L for forming jambs , etc to openings (to foregoing item) , including cutting , toothing and properly bonding into old work, also facing , jointing and pointing to match existing work using cement mortor 1:6 complete all as specified and as directed.

M & L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard and dense soil

M&L for 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc all as specified.

M & L for 100mm thick cement concrete typeD2 1:4:8 (40mm graged aggregate) as sub base etc complete all as specified

M & L for sand filling under floors or in foundations including watering and consolidation etc all as specified.

M & L for providing PCC type B1-1:2:4(using 20mm graded aggregate) in coping, kneelers, apex stones, bed plates, including weathering, slightly,rounded or chamfered angles and throating as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for cement plaster 15 mm thick in cement mortar 1:4 on brick masonry surfaces finished even & fair without using extra cement all as specified and directed.

M&L for rendering 15 mm thick internal cement plaster in CM 1:6 on fair faces of stone masonry surfaces, finished even smooth with out using extra cement complete all as specified

M & L for preparing new plastered surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying two coats of Oil emulsion distemper over a coat of primer complete all as specified

M & L preparation of finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.

M & L for Preparing old surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of Plastic emulsion paint complete all as specified

M & L for preparing old surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of arcylic exterior emulsion antifungal paint upto 4th storey.

M & L preparation of finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm with 2 to 3mm thick wall care putty on walls etc complete all as specified

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be measured and paid separately) Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made (including scaffolding work).

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be measured and paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S& F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S & F in repairs 32mm dia Harrison rails,stainless steel fancy type with fixing brackets, stops, rollers etc complete all as specified & directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B0( using 12.5 mm graded stone aggregate) as in stages for tank, roof kerbs covering over chajjas and similar locations rounded or chamferred on edges incl necessary formwork complete all as specified & as directed by Engineer-in-Charge

S & F 4mm thick Sheet glass, ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified & as directed

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & as directed

M & L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying two coats of Oil emulsion distemper including one coat of primer complete all as specified

S & F aluminium snap grid size 605 x 605mm false ceiling frame work of wall angle 25x25x2mm, Main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm and size of grid 605x605 mm complete all as specified and directed.

Providing and fixing 12mm thick perforated Gypsum Board 600mm x 600mm size in ceiling fixed with screw as per manufacturers instructions

S&F hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.50mm dia, 40 mm long complete all as specified and directed.