Info Tech Corporation Of Goa Limited Tender
View complete overview of Goa ITG Tender
Costs
EMD
₹ 4,89,670Document Cost
₹ 15,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ITG_16092_1Bid Award Id
ViewTender No
CO-WORKING SPACE/JUNTA HOUSE/2024-25/263/797Tender Authority
Info Tech Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earthwork excavated in saturated soil for every 0.30 m depth or part thereof over 0.60 m depth below water table including pumping and bailing out water (For depth of 1.20m to 1.50m)
2.1
-
-
... More
Open timbering in trenches including strutting and shoring complete. (face area to be timbered only to be taken)
a) Depth not exceeding 1.5 m
42
-
-
... More
Closed planking in trenches including strutting and shoring packing cavities (wherever required) complete. (measurement to be taken only on face area to be timbered)
a) Depth not exceeding 1.5 m
42
-
-
... More
CHAPTER VII LATERITE MASONARY WORKS
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
4.2
-
-
... More
Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
24
-
-
... More
CHAPTER VIII PLAIN CONCRETE WORKS
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :
a) All works upto plinth level
1.4
-
-
... More
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
b) String courses, copings, bedplates, anchor blocks, plain window sills and the like.
1
-
-
... More
CHAPTER IX REINFORCED CEMENT CONCRETE WORKS
Providing TMT steel reinforcement bars of SAIL,TATA,VIZAG made only(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. Note: Minimum Grade to be used is TMT Fe 500
3120
-
-
... More
Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level.
26
-
-
... More
CHAPTER X WOOD WORK
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
b) 40 x 3 mm flat iron hold fast, 15 cm long
975
-
-
... More
CHAPTER XI STEEL AND ALUMINIUM WORK
Steel work(SAIL, TATA. VIZAG only) riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.
b) In tees, angles, flats and channels
1.44
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
7559.8
-
-
... More
Providing and fixing structural Profile decking sheet as per particular specification,with GI sheet, zinc coating not less than 275 GSM as per IS 277 and of yield strength 500 Mpa of approved make with specified Base Metal Thickness.The profile shall be structural decking profile having ribs & pitch as per the drawing referred with the embossments (shear groove) on top and side of the ribs for better composite action. The deckingsheet shall be fabricated to required form as per the slab design and fixed with Galvanised Iron fasteners, self drilling screws, shear studs as per IS 1367, connectors etc. complete as per design,drawing and direction of Engineer-in-Charge. (Refer typical drwg). Plan area of the sheeting shall be measured and paid for.Structural steel frame work, reinforcement steel and concrete shall be paid seperately.15. R2-CS-SS-30-b With Base Metal Thickness (BMT) (excluding Zinc coat thickness) 1.20 mm thick Profile decking sheet
227
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1068
-
-
... More
Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
113
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)
11
-
-
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
10
-
-
... More
Providing mechanical device, chain and crank operation for operating rolling shutters.
a) Exceeding 10.00 sq.m. and upto 16.80 sq.m. in area
11
-
-
... More
CHAPTER XII FLOORING AND FLOOR FINISHES Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
324
-
-
... More
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
17
-
-
... More
Providing and fixing Vinyl flooring of approved shade and design with adhesive complete.
30
-
-
... More
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.
b) 600 x 600 mm - light Shades
23
-
-
... More
CHAPTER XIII ROOFING & CEILING WORKS
Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
88
-
-
... More
75 mm Metal stud partition 2438 mm height which includes one layer of tapered edge 12.5 mm thick Gypsum board (conforming to IS:2095 – 1982) screw fixed with drywall screw of 25 mm at 300 mm centres to either side of 48 mm studs (0.55 mm thick)
50% increase in rate since it is Marine grade gypsum
65
-
-
... More
Providing & fixing colour coated Alluminium (PUF) sandwich panel roofing systems of approved make adhering to Aluminium 3105 grade for top & bottom sheet of thickness 0.40 & 0.35 respectively including PUF insulation betewwn the top & bottom sheet of Denslity 40 (+/-2) Kg/m3 inclusive of S.S.304 grade self tapping fastneres, complete as directed by Enigneer incharge (frame work for roof, roof accesorries to be paid seperately) for tile Design PUF roof panel, Gutter width should be atleast 25% more than the Crest width. Minimum height at heighest point of Crest should be minimum 65mm. Minimum thickness at anygiven point should not be below 30mm. b) PUF Insulated tile roof 50mm thick of trapezoidal design
158.31
-
-
... More
CHAPTER XIV PLASTERING AND FINISHING WORKS
12mm cement plaster 1:4 (1 cement : 4 fine sand)
453
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
418
-
-
... More
Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.
418
-
-
... More
Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.
418
-
-
... More
Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
453
-
-
... More
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
42
-
-
... More
Paints two coats on G. I. Sheet with superior quality ready mixed paint of approved brand and manufacture on new work to give an even shade.
281.6
-
-
... More
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
453
-
-
... More
CHAPTER XV DISMANTLING DEMOLISHING & REPAIRS WORK
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.
905
-
-
... More
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
5
-
-
... More
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead
b) Area beyond 3 sq.m.
3
-
-
... More
Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 50 mts. Lead
b) Area beyond 3 sq.m.
3
-
-
... More
Carting away of the debris away from the site including loading in to truck unloading upto 10 kms away from the site as per directions of the architect/ Engineer in-charge.
96
-
-
... More
CHAPTER XVII WATER SUPPLY SEWERAGE, PLUMBING & SANITATION WORK
Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required.
a) W.C. pan with white plastic seat and lid
3
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls and floors where required.
a) One urinal basin with 5 litres p .v .c. automatic flushing cistern.
2
-
-
... More
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
b) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps.
6
-
-
... More
Providing and fixing White Vitreous Under Counter Oval Shaped Two Wash Basins of Size: 560x430x195 mm including cutting of stone and making good the walls wherever required with coupling & all accessories complete.
3
-
-
... More
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
4
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality :
a) 15 mm nominal bore
6
-
-
... More
Providing and fixing ball valve (brass) of approved quality :
b) Low pressure with copper. floats :
1) 15 mm nominal bore
4
-
-
... More
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:
45 cm (18”) length .
6
-
-
... More
Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density):
a) 25 mm nominal bore.
20
-
-
... More
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.
c) 1000 lit. capacity
4
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :
a) 100 x 100 mm size P type
11
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
3
-
-
... More
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
... More
110 mm dia
30
-
-
... More
75 mm dia
27
-
-
... More
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:
-
-
-
... More
110 mm dia.
1
-
-
... More
75 mm dia.
1
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
... More
110 mm dia
1
-
-
... More
75 mm dia
1
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
a) 110 mm dia
11
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).
-
-
-
... More
20 mm outer dia CPVC pipe
5
-
-
... More
50 mm outer dia CPVC pipe
34
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
3
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
3
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.
I) SCH-40(blue)/(white)
-
-
-
... More
20mm outer dia.
5
-
-
... More
50mm outer dia.
34
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete
a) Overall size 1040mmx510mm (41"x20") bowl size 460mmx410mmx200mm (18"x 16"x 8") depth 200 mm. Glossy. 1.0mm thk,
1
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock with extended lever handle and wall flange Confirming to IS 8931; 1993 15mm nominal bore
1
-
-
... More
CHAPTER XVIII MISCELLANEOUS WORK
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.
b) Post construction
371
-
-
... More
SOLID UPVC WINDOW FRAME AND SHUTTER: Frame: of size 50mm x42mm consisting of frame made out of M.S. tube of 19 gauge of size 15mm x 15mm and Solid PVC sections made from 4.25mm thick sheet (4mm (±0.3) PVC foam sheet laminated with 0.25mm Rigid PVC sheet) of density 900 kg/cbm density manufactured by an ISO-9000 certified company, suitably joined using PVC solvent cement so as to prefixed in wall. In wall using hold fasts M.S. window grill should be fixed suitably with Solid PVC sections mitre cut on corners complete as per direction of Engineer-in-charge and manufacturer's specification. Shutter: consisting of frame made out of M.S. tube of 19 gauge of size 15mm x 15mm for style, top, bottom rail. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 4.25mm thick sheet (4mm (±0.3) PVC foam sheet laminated with 0.25mm rigid PVC sheet) of density 900 kg/cbm density manufactured by an ISO-9000 certified company, white colour rigid heat moulded PVC 'C' Channel of size 62mm x 25mm x 50mm of the window shutter forming stiles & rails. Glass panel and Wire mesh will be fitted externally in the clear space available between stiles and rails and fixed using window shutter PVC beading of size 12mm x 8mm complete as per direction of Engineer in Charge and Manufacturers specifications
17
-
-
... More
Skylight - Danpalon Or Equivalent Day light Panel System: Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panels shall be uniform in color with an integral Microcell core. In a cross section, the core shall be constructed of tight cells with 6 walls. Panels will be supplied with Vertical Standing Seam at both sides of the panel Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability & shall be of same color as that of panel for aesthetic appeal. NOTE : Necessary Steel structure to be provided by the Steel fabricator. Skylights framework to be raised by 200 mm from Roof Pan level.
33
-
-
... More
Fabrication and fixing of Aluminium composite panel cladding with thick 4mm/ 0.25mm ACP sheets, aluminium framework, with 50 X 25 X 1.2 mm thick sections. Silicon sealants etc. including accessories complete.
86
-
-
... More
Providing and Fixing Awning at 4.00m Level of approved makes brand having canvas with customised size as per engineer incharge.
39
-
-
... More
Providing and fixing of approved make WPC (Wood Plastic Composite) door shutter (30mm thickness)of high density of 750 kg/cum including heavy duty S.S.butt hinges with necessary screws. WPC to constitute 70% virgin polymer, 15% wood powder, and the rest 15% additives. The shutter to be of single colour , prepainted of approved shade, water proof , paintable. (The shutter to be fixed on a granite frame paid separately.)
17
-
-
... More
Providing and supplying HPL Toilet Cubical of solid and wooden of customized size as 1000(W) x 1500(D) x 2000(H) mm of approved makes brand as per clients requirements.
3
-
-
... More
Providing and supplying HPL Toilet Urinal Cubicals of modular type of approved makes brand as per clients requirements with all the accessories required as directed by the architect/engineer.
2
-
-
... More
Providing and fixing signage made from aluminium composite panel. The background of panel will be photo illuminiscent (glow in dark) pasted with computer cut vinyl letters as per specifications, the panel will be duly grooved and folded from all the sides to make it projected and will be fixed on surface with tape that provides instant and permanent bonds to painted & unpainted metals, plastics, vinyl and glass / necessary screw arrangements on the rear side as per drawings and specification.
1
-
-
... More
Providing & Fixing of signages made from Aluminium Composite Panel. The background of the panel should be pasted in reflective sheeting computerized cut letters in reflective pasted on it. The board to be mount on 2" dia GI pipe of 3 mtr height having a coat of metal primer and a coat of black enamel paint complete as per drawing as directed by the engineer
1
-
-
... More
Providing and fixing Granite Counter Top slabs ready are available in 2 and 3 cm thicknesses. 4, 5, 6, 8, 10, 12 cm and etc are available of Rough, Honed, Resinated, Flamed, brush hammered, brushed with all the accessories as per client needs of approved makes having rectangular shape.
6
-
-
... More
Supply, Installation, Testing & Commissioning of Hydraulic Lift with. G+1, 2 Stops,of size : 1200mm X 900mm of brand approved makes.
1
-
-
... More
Providing and fixing in position Teracotta jali size 20x20x7.5 cms as per specification as directed by engg incharge.
33
-
-
... More
Providing and installing SS316 Tactiles Buttons/Studs tile of Size 35x25x4.5mm ,16 buttons for width of 300mm and running length of 300mm after duly drilling holes and inserting button / studs along with required epoxy adhesive and accessories including finishing etc, complete as per direction of engineer as per detail drawing and specifications.
720
-
-
... More
Providing and installing SS316 Tactiles Strips/liners tile of Size 280x35x4mm after duly drilling holes and inserting Strips/liners along with required adhesive and accessories including finishing etc, complete as per direction of engineer as per detail drawings and specifications .
1184
-
-
... More
INTERIOR AND FURNITURE WORKS
Office Tables :- Providing and fabricating work table of size: 1500mm x 800mm x 750mm as per drawing, top made of 25mm thick BWP ply and other members made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 6.00 mm thick Veneer of approved make/ teak wood beading and french polish (min. 3 coats) to be applied on all internal surfaces complete with 12mm plain glass with edge polish provided on desk top, keyboard holder and all hardware like hinges, handles, telescopic channels, lock, magnets, cable managers etc. complete as per design and approval of the engineer as directed by engineer.
21
-
-
... More
Supplying and placing in position Standing Tables of size as per client requirement approved makes brand with all the accessories as directed by the engineer.
2
-
-
... More
Supplying and placing in position Wall mounted table of size LXBXH=3000mmX350mmX1000mm or customized as per clients need from approved makes brand as per site engineer instructions.
5
-
-
... More
Conference Table:- Supplying and Installing in position conference table of approved make and size having seating capacity of 12 number with Table Top of shape option of either Cascade /Oval Shape,having table top made up with 25 mm thick prelam particle boardconforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding and The understructure leg made up of prelam Particle boards / MDF board with 2mm thick PVC edge banding. Gable ends in 25mm thick and modesty panels of 18mm thk. or 25 mm thk. metal leg with polish finish,table top having concealed wire management to take care of basic wiring requirement and having pre-fitted side opening flip top box for providing power-data-voice switches on a modular switch plate.The details need to be as per the instructions of Architect or Engineer, etc. complete. (Size- 12 Seater, minimum 3000x1200x750mm)
4
-
-
... More
Office chair: Supplying and Installing in position office chair of customized size (LxBxH: 59x51x94 cm) having mesh seat material having fixed type arm having 94cm minimum seat height and 109cm maximum seat height,having nylon base with locking system with load capacity 90 Kg with armrest included of approved makes brand complete with all accessories complete as directed by engineer.
21
-
-
... More
Bar Stool:-Supplying and Installing in position Solid Mango Short Wooden Top Bar Stool having width: 34 centimetres,height: 54 centimetres, depth: 34.5 centimetres of approved makes brand complete with all accessories complete as directed by engineer.
31
-
-
... More
Conference Chair:- Supplying and Installing in position customized Leatherette White Revolving Executive Chair having adjustable seat height with arm included with adjustable backrest which is rotatable having 5 number of wheels with all accessories complete as directed by engineer.
30
-
-
... More
Ottoman stools:Supplying and placing in position customized ottoman stools of colour as per clients choice Perfect Round Metal Pouffe Stool having circular cushion of customized diameter as per clients requirements with all the accessories complete as directed by the engineer.
14
-
-
... More
Café Chairs: Supplying and placing café chair of MS iron material of customized sizes as per clients requirements of approved makes brand with all the accessories as directed by the engineer.
36
-
-
... More
Café Tables:Supplying and placing café table of Wooden material having Sheesham Wood as its primary material with 1 seating capacity provided with cushion seating facility of cushion material as rexine with armrest available of approved makes brand having polished wooden finish with 18 inch seating height with all the accessories as directed by the engineer.
9
-
-
... More
Recliners Chairs:Supplying and placing in position recliner chairs having manual mechanism of PU lather as its primary material having 1 seater capacity of wooden frame material colour can be customised as per clients requirements having swivel base mechanism which can be used in office as well as homes of approved makes brand having foot rest with all accessories as directed by the engineer .
6
-
-
... More
Lockers:-Supplying and Installing in position office lockers having polished surface with powder coating surface having manual automation grade in the shape of square having LxBxH: 3000mm x 300mm x 2100mm of approved makes brand with all accessories as directed by the engineer.
2
-
-
... More
Retractable seatings: Providing and Installing retractable seatings of Premium finish, Sturdiness of Longer life ,size customisable as per clients needs having approved makes brand with all accessories as directed by the engineer .
24
-
-
... More
Shelves: Supplying and Installing shelves of customized size of approved makes brand with all the accessories complete as directed by the engineer .
6
-
-
... More
Seater: Supplying and Placing in position sofa having solid frame structure made with pneumatic nails supported by ply wood,having approved makes brand complete with all accessories as directed by the engineer .
2
-
-
... More
HVAC WORKS
A) Supply Of Equipment
Supply of 8.5 TR Ceiling Mounted Hi Static Ductable AC having Evaporator & condensing Unit with Scroll compressor corded remote controller with R 410 A Refrigerant Gas (Make : CARRIER)
6
-
-
... More
B) Installation & Low side
Installation of 8.5 TR Ceiling mounted Ductable Unit
6
-
-
... More
Supply and fabrication of Class "O" rated preinsulated aluminium( EXPOSED) rectangular duct work complete with close cell rigid polyurethane foam insulation of thickness as specified below and density not less than 50 Kg / CuM. The ductwork should be capable of handling pressures upto 1000 Pascals. The joint between the ducts shall be done by means of aluminium “flange / slide-in channel” system or PVC slide in type joint with the installation of a plastic foam gasket between the ducts to prevent any air leakage. Joints to be air tight and tested for leaks as specified in the tender. Duct supports at regular intervals as specified in the tender, Turning vanes, elbows and redusers to be considered as part of supply of ducts.The ducts to be coated with anti roddent treatment. i) 20 mm thick
219
-
-
... More
Suppy & installation of Hard copper piping with 10 mm thick nitrile tubular insulation
168
-
-
... More
Supply Installation of Aluminium powder coated jet nozzles for supply air
2
-
-
... More
Hard PVC drain pipe of 25 mm Thick with 9 mm tubular insulation
38.32
-
-
... More
6 core flexible cable 2.5 sqmm sqmm
120
-
-
... More
Supply and fixing of acoustic insulation for supply air ducts with 10 mm thick armasound nitrile open cell insulation sheet
109.3
-
-
... More
Supply, installation, testing and balancing of duct mounted volume control dampers fabricated from 20 gauge galvanized steel sheets
12
-
-
... More
Supply, installation, testing and balancing of powder coated aluminium supply air grills with volume control dampers.
12
-
-
... More
Supply and installation of powder coated aluminium return air Diffusers without volume control dampers. (measured 600x600mm irrespective of neck size)
2
-
-
... More
MS stand to mount outdoor units
6
-
-
... More
Gas charging with R410 A refrigerant
48
-
-
... More
Lifting Shifting of Indoor & Out door unit to floor level
6
-
-
... More
DG SET
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 62.5 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 11.3 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0m, provided with first filling of oil, diesel not less than 150 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG
2
-
-
... More
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 50 kVA up to 62.5 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.
2
-
-
... More
LT CABLES, MAIN'S WIRING, CONDUIT,POINTS
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
4) ' 3 Core 6 sq.mm
68
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required
a) '(a) In soily strata: for item 11011(4),11012(4) and 11012(5)
167
-
-
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.
b) 11 KV, 3 Core x 50 - 95 sq.mm
4
-
-
... More
Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
... More
4 Core 6 sq.mm
59
-
-
... More
4 Core 10 sq.mm
40
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3) ' 3 x 6 Sq. mm.
6
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
... More
(3) 4 x 6 Sq. mm.
6
-
-
... More
(4) 4 x 10 Sq. mm.
4
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
... More
3 1/2 Core 35 sq.mm
185
-
-
... More
3 1/2 Core 50 sq.mm
116
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formaion including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
'(a) In soily strata: For item number 11005(2) and 11005(3).
301
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
... More
3 1/2 Core 35 sq.mm
10
-
-
... More
3 1/2 Core 50 sq.mm
4
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.
-
-
-
... More
(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
5642.83
-
-
... More
(j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit)
59
-
-
... More
(k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit)
40
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
f) 'Group C -- with Cat B Modular Accessories
3
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
3
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.
(b) 25 mm
1386.05
-
-
... More
LIGHT FITTINGS AND ACCESSORIES Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90,operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2. class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min.10000 Lumens, min. efficiency of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90,operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.
4
-
-
... More
Supplying and erecting integrated LED wall washer 10 Watt of size 19.8 cm H x 17.7 cm W x 2.5 cm L.
42
-
-
... More
Supplying and erecting integrated LED tubelight 20 Watt of approved makes brand ,having light colour as 3 in 1 - CDL, WW, NW,light type Neon having energy efficient as its special features,with B22D as bulb base.
144
-
-
... More
Supplying and erecting Heritage Lamp Post having wattage as 6W, 10W, 15W of body material as Aluminium of Lamp post having lighting type as Cfl, Led of approved makes brand.
12
-
-
... More
Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
17
-
-
... More
Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
86.4
-
-
... More
Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
(a) Cat A
3
-
-
... More
Supply, Installation, Testing and Commissioning of Main LV panel, cubicle type, made 14 SWG CRCA sheet (load bearing), with supporting angles, self locks, gasket having including cutting,bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as per specification.
Main L T panel - 1
Incoming :- 1) 400 Amp,3P,4MCCB : 1 Nos. 2) 3 No. Multifunction meter with control MCBs. 3) 6 Nos. ON/OFF indicating Lamp
4) 6 Nos. phase indication lamps with control fuses
Busbar :
400A ,200A,160A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
Outgoing :-
1) 400 Amp,4P,36KA,MCCB - 1 no
1) 200 Amp,4P,36KA,MCCB - 2 no
2) 160 Amp,4P,36KA,MCCB - 2 no
3) 63 Amp,TP,36KA,MCCB - 10 no
All the O/G shall have with ON/OFF indication lamp
1
-
-
... More
Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS
3
-
-
... More
Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.
18
-
-
... More
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required)
(a) 4 way with 100A MCCB as Incomer, double door, Cat A
15
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)
'(b) 2 + 8 way Cat A
6
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
... More
(a) SP, Cat A
199
-
-
... More
(c) DP, Cat A
9
-
-
... More
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
'(d) TP, Cat A
16
-
-
... More
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required
-
-
-
... More
(a) 25 A, Cat A
6
-
-
... More
(b) 40 A, Cat A
9
-
-
... More
NETWORKING
Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635 mm) as per specification No. WG-NAS/RAK
12
-
-
... More
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
9
-
-
... More
Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
240
-
-
... More
Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/ GBS
9
-
-
... More
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required
a) 'Cat 6
3777
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. b) CAT B
60
-
-
... More
TELEPHONE
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required.
(b) 20 Pair
28
-
-
... More
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.
(c) 20 Pair
100
-
-
... More
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.
'(a) 2 Pair
199.5
-
-
... More
Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW
1
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. b) CAT B
7
-
-
... More
CCTV
Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS
2
-
-
... More
Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.
1
-
-
... More
Supplying, Installing, Testing & commissioning of minimum 2 MP Full HD Day & Night Varifocal Indoor Dome Network Camera, 20M IR distance, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.2 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 30 FPS, H.264 video compression, verifocal lense 2.8mm- 12mm (focal length to suit location) with features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software.
27
-
-
... More
Supplying, Installing. Testing & Commissioning of 40" Full HD Commercial LED LCD Signage Display Resolution Full HD (1920 x 1080),Motion flowMotionflow XR 100 Hz, Video Processing X-Realit, with built in CPU and Ethernet / RS-232C ,remote control Inputs of VGA, HDMI4 (2Side/2Bottom), DVI-D, and RS232C built-in LAN card to access the network ,Media Remote,Internet Browser,Wireless LAN supported, Power Requirements (voltage) AC220-240V
Power Consumption (in Operation) Shop 85W / Home 41W Shop 115W / Home 6with Smart Signage software.
4
-
-
... More
Supplying,erecting,testing and commissioning S/I/T/C 19" RACK MOUNTABLE NVR:SUPPORTS 32CAMERASProfrssional Series 4 K HD net work, Video recorder -/smart H265+/H265/Smart 264+ max 384 Mbps in coming Band width up to 12MP resolution for preview and play back -Bit rate 16 Kbps 20 Mbps per channel-2 HDMI/2 VGA simulataneous video out put to enchance the storage reliability when the network break down Quad core embeded processor : SATA III ports up to 6 YB for for each HDD for 48 TB storage 2 RJ 45 port ( 10/100/100 Mbps ) Independent of joint networking / Analitical fotures like ANPRA people count face detection Missiing/ Abondoned objects Tripwire and intrusion alarm smart FAN to achive net work vedio recorder with the ANR fonction automatically store video data.
1
-
-
... More
Supplying & erecting 4 TB enterprises hard disk 6 GB/sec/128 MB cache 24x7x365 reliabilty similar to model no.seagate ST2000NM0033.
2
-
-
... More
EARTHING DETAILS
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).
(b) In rocky strata
5
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately).
(b) In rocky strata
3
-
-
... More
Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required
24
-
-
... More
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
39
-
-
... More
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required
200
-
-
... More
P A SYSTEM (FF-PAS)
Supplying , erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR.
1
-
-
... More
Supplying , erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA /SOC.
20
-
-
... More
Supplying , erecting, testing and commissioning stand mounted / handheld type wired microphone having 2 mV / Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector,stereo jack complete as per specification no. FF-PA /MIC.
1
-
-
... More
Supplying , erecting, testing and commissioning rust free microphone table stand of chrome plating / powder coating or S.S. material , up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.
20
-
-
... More
Supplying , erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC.
10
-
-
... More
Supplying , erecting, testing and commissioning of 1.0 Sqmm speaker wire complete.
5
-
-
... More
DISMANTLING
Dismantling the existing W.T. flourescent fitting /S.V. / M.V. /M.H. lamp /LED fitting from wall brackets and making the site as original complete.
4
-
-
... More
Dismantling the existing fan /exhaust fan / cabin fan /bracket fan complete with accessories , G.I. down rod,frame etc. and making the site clear.
3
-
-
... More
FIRE ALARM SYSTEM/ACCESSORIES
Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300μA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/ SD .
5
-
-
... More
Supplying and erecting ABC powder type fire extinguisher of 4 kg capacity with necessary clamp for erection on wall.
5
-
-
... More
ROOFTOP OFF GRID SOLAR SYSTEMS(ESD-RT-OFG)
Supplying, installing, testing and commissioning of 5 kWp OFF-GRID solar power pack with interconnecting wires / cables up to 24V pure sine wave solar power inverter (THD
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements