Info Tech Corporation Of Goa Limited Tender
View complete overview of Goa ITG Tender
Costs
EMD
₹ 11,56,503Document Cost
₹ 20,000Tender Fee
₹ 6,000
Summary
Renovation Of Existing Building Toward
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ITG_18546_1Bid Award Id
ViewTender No
BARDEZ/2024-25/300/2630Tender Authority
Info Tech Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
C. REINFORCED CEMENT CONCRETE WORKS
Providing and laying in position (1:2:4) reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. (1 cement:2 coarse sand:4 graded stone agg 20mm nominal size) c. In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, intels, bands, plain window sills, staircases upto floor five level
2
7611
15222
... More
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
2880
105
302400
... More
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
133.5
810
108135
... More
FORMWORK
Centering & shuttering including Strutting, Propping & removal of forms for :
iv. Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
33
412
13596
... More
E. WOOD WORKS
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. : Second class Indian teak wood
1
167470
167470
... More
Providing wood work in frames of false ceiling, partitions etc., sawn and put up in position.
A. Second class matti wood
3.5
104851
366978.5
... More
Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters.
b. 35mm thick including anodized aluminium butt hinges with necessary screws:
36
3809
137124
... More
Providing & fixing in partition 4 mm thick with Marine plywood of approved quality including fixing in frames with brass screws etc. complete with 50 x 12 mm First class Indian teak wood beading (frame to be paid separately)
413.5
1183
489170.5
... More
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
b) 40 x 3 mm flat iron hold fast, 15 cm long
72
99
7128
... More
Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete
36
864
31104
... More
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter
Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
Shutter Thickness : a) 32mm
30.5
4480
136640
... More
FRP (Fiber Reinforced Polymer) Frames
Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company Specified Cross Section : b) 4” x 2”
90
739
66510
... More
Providing and fixing bright finished brass handles with necessary screws etc complete
a. 125 mm
36
169
6084
... More
Providing and fixing bright finished brass door latch with necessary screws etc complete
b. 250 x 16x 5 mm
18
1599
28782
... More
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete
c. 150 x 10 mm
36
345
12420
... More
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
18
2102
37836
... More
F. STEEL AND ALUMINIUM WORK
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section.
b. Plain glass
104
3191
331864
... More
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.
c. Figured glass
9
3228
29052
... More
Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
113
215
24295
... More
Envirotech Sliding / Movable wall Acoustic with Sliding Glider type vertical panels and one adjustable panel of 85 / 100mm thickness. The wall internal built is consisting mechanism to move top and bottom seal manually operated by handle inserted in the panel style, turning the handle through 45 degrees shall simultaneously extend or retract the top and bottom seals through steel and spring mechanism, which shall firmly hold the seal in the retracted seal or extended mode. The panel trim shall be standard series with exposed aluminum trims finished in aluminum.Each panel consisting top and bottom Edm rubber retractable seal with concave/convex vertical interlocking profiles.Vinyl seal of butane rubber shall be used at top and bottom and as well as closer seals for operable wall system. Retractable seal drop shall be 20mm.Width of panels shall be 800-1200 as approval of Engineer-in charge. Panels shall be made from 12mm MDF board hung in acoustic isolation from the frame and allowed to vibrate independently of the frame. Each panel shall be suspended on extruded 6063-T5 Aluminum track; steel cold ball bearing roller/trolley of material NYLON wheal made with base material of POM 45 tempered steel, maintenance free with multiple ball bearings, Single roller OR double roller as per design of Centre Stacking OR side Stacking The final finish of sliding panel will be in Mica laminate finish, minimum thickness 01 mm, mica color / shades shall be as per Architect's / Engineer in-charge recommendations.
419
19745
8273364.5
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923/Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA, VIZAG, JSW, APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer, including welding & bolted with special shaped washers etc. complete
60000
184
11040000
... More
G. FLOORING AND FLOOR FINISHES
Providing & fixing Vinyl flooring of approved shade & design with adhesive complete
756
925
699300
... More
Providing and laying engineered wooden floor skirting of height 75mm of approved make (armstrong/ ego ) laid as shown in drawing including adhesive also includes in the item.the item also include levelling with plaster of paris if required & as per instruction of engineer in charge.
54
1560
84240
... More
Providing and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 600 x 600 mm light Shades
756
1057
799092
... More
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. : 600 x 600 mm - light Shades
53
980
51940
... More
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.
b. Wall Ceramic Glazed Tiles : 300 x 450
212
892
189104
... More
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete : Light Shades
45
926
41670
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm : Jet Black
9
4085
36765
... More
H. ROOFING
Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.
504
401
202104
... More
Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.
1320
2236
2951520
... More
The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Glass Wool Insulation with FSK facing 50mm with 24 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
-
-
-
... More
Providing & Fixing of Aluminium Lay-in Perforated Tile Ceiling on 24 /14 mm ‘T’ Framework of module 600mm x 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. Perforation of the tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling. The tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. The Tile shall be Polyester based, powder coated in white colour. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 24 /14 mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm G.I. rod from slab/roof. The suspension shall be provided at 1200 to 1500mm centre to centre. Tee framework would be made of GI and Powder coated. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption.
802.5
1793
1438882.5
... More
I. PLASTERING AND FINISHING WORKS
12mm cement plaster 1:4 (1 cement : 4 fine sand)
198
223
44154
... More
Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.
1153
19
21907
... More
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
1433
51
73083
... More
Applying priming coat with ready mixed primer of approved brand & manufacture on wood work complete
1096.5
58
63597
... More
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
104
51
5304
... More
Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade.
104
73
7592
... More
Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade.
1161
72
83592
... More
Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade.
1433
79
113207
... More
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1433
89
127537
... More
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
162
161
26082
... More
Melamine polishing on wood work (one or more coat) : Glossy
243
991
240813
... More
J. DISMANTLING DEMOLISHING & REPAIRS WORK
Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.
With cement mortar 1:4 (1 cement : 4 fine sand)
82.5
314
25905
... More
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
92
1136
104512
... More
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead
-
-
-
... More
Of area 3 sq.m. and below
108
206
22248
... More
Area beyond 3 sq.m.
193
266
51338
... More
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.
839
330
276870
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.
1260
27
34020
... More
Dismantling the tile & stone work in all thickness in floors laid in single /multiple layers (ceramic/mosaic/kotha or any other flooring etc) in cement /adhesive as case may be including stacking of dismantled materials within 50 Meters lead etc complete. Note :- Single plan area for (ceramic +misaic + any other flooring) will be considered for payment.
1080
330
356400
... More
Dismantling the tile /stone work in dados /cladding /skirting at all levels laid in cement mortar including stacking of unserviceable materials within 50 metres lead for thickness of tiles /stone 8mm to 30mm as directed by Engineer
1080
127
137991.6
... More
Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
90
958
86220
... More
Scraping of existing Neeru/POP /wall putty from the wall /ceiling surface so as to expose the existing plaster including disposal of all rubbish /dust created at all leads and lift as directed by Engineer
7200
15
110016
... More
Dismantaling and removing of existing Storage cabinets/Counters made up in plywood/Prelam board of all sizes and fixed over with laminate/veeners etc and disposal of all dismantled unserviceable material at all leads and lifts as directed by Engineer
36
1742
62721
... More
Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead.
1350
38
51300
... More
Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
3690
79
291510
... More
Carting away of the debris away from the site including loading in to truck unloading upto 10 kms away from the site as per directions of the architect/ Engineer in-charge.
175
374
65500.75
... More
Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW
162
10
1620
... More
Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 sq.mm. along with accessories etc. complete as per specification no. DM/PW
360
6
2160
... More
Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp /LED fitting from wall with brackets and making the site as original complete.
54
52
2808
... More
Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear
36
42
1512
... More
K. WATER SUPPLY,SEWERAGE,PLUMBING AND SANITATION WORKS
Providing and & fixing white vitreous china wash basin including making all connection but excluding the cost of fittings :
b. Flat back wash basin of size 550 x 400 mm
18
2577
46386
... More
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
18
10687
192366
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993
a. 15mm nominal bore
18
1484
26712
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 a. 15mm nominal bore
18
1525
27450
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
18
1648
29664
... More
Providing and fixing toilet paper holder : a. C.P. Brass
18
1385
24930
... More
Providing and fixing P.V.C. connection pipe with
brass unions 15 mm nominal bore:
c. 45 cm (18”) length .
18
235
4230
... More
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
18
2130
38340
... More
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws
a. Glass container
18
2061
37098
... More
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.
b. 500 lit. capacity
18
5044
90792
... More
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :
b. 150 x 100 mm size –P or S type
18
2977
53586
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. d. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
36
10768
387648
... More
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
... More
110 mm dia
72
295
21240
... More
75 mm dia
90
157
14130
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
-
-
-
... More
110 mm dia
36
445
16020
... More
75 mm dia
36
214
7704
... More
Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
... More
110 mm dia
18
197
3546
... More
75 mm dia
18
127
2286
... More
Providing and fixing stainless steel cockroach trap with grating, 150 X 150 mm of (Approved brand and make) including sealing of edges with white cement and accessories etc. complete as per the direction of engineer.
18
438
7897.32
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
a. 110 mm dia
18
170
3060
... More
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
18
465
8370
... More
Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. :
18
4725
85050
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993
18
1290
23220
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.
-
-
-
... More
15 mm dia nominal outer dia pipes.
144
201
28944
... More
20 mm dia nominal outer dia pipes.
90
255
22950
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) f. 50 mm dia nominal outer dia pipes.
198
851
168498
... More
L. MISCELLANEOUS
Providing preconstruction anti – termite treatment to the buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as mentioned therein with the cost of all materials chemicals, plants, equipments etc. required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building.
b) Post Construction
972
88
85536
... More
Repairs to the deteriorated /damaged areas of RCC elements in the structures shall be carried out by using Polymer modified repair mortar. The polymer modified mortar is applied when the epoxy bonding coat is still tacky. In one application 20 mm thickness shall be built. Subsequent layer shall be built with one bond coat of Polymer modified cement slurry. The Polymer modified repair mortar shall have the following specifications: • Cement (OPC) : 100 kg • Clean river sand - 2.36 mm down : 300 kg Or 30-80 Graded quartz sand •Polymer latex (Monobond) : 10 kg • Water : 30 litre (Approx) Cure by spraying periodically with water for 3 days and allow to dry for next 5 days. incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
42
1130
47460
... More
Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent
43.5
691
30058.5
... More
Providing and fixing High Pressure Laminate HPL Laser Cut Panel having thickness: 5 to 8mm,of appropriate size which shall be fixed on 6mm thick sheet of light diffusing acrylic board to enhance the deign of the panels . The Panel shall be fixed to the wall etc with SS screws . All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
112.5
13938
1568025
... More
Providing and fixing signages made of 1.5mm thick stainless steel plate of size 400mm x 150mm of grade 304, with CNC Laser cut letters, this shall be fixed on 6mm thick acryllic board base of size 450mm x 250mm with 12mm dia SS studs of grade 304 with brass buttons and screws complete. The signage shall be fixed to the wall/ doors etc with SS screws or suspended from the ceiling by means of SS chain of adequate height (maximum 1000mm) of 8mm dia with anchor fasteners complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
18
52267
940815
... More
Supply and fixing of double skin Gypsum partition 75mm overall thickness Partition with 12.5mm thick double skin Fire Resistance Gypsum Board consisting of GI steel frame encased in Gypsum boards on either side of thickness 12.5mm attached with self-drilling drywall screws. The joints shall be taped and finished with gypsum jointing compound at any height or at any level all complete. consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws.
112.5
3125
351642.38
... More
M. INTERIOR AND FURNITURE WORKS
Wall mounted table:- Supplying and placing in position customized Wall mounted table of size 2300mm x 600mm with heavy duty shelf bracket to clamp the it to the wall. 25mm Table top made of good quality sheesham wood and neatly given a coat of Melamine polish (one or more coat) : Matt.
18
41151
740735.1
... More
Conference Table:- Supplying and Installing in position conference table of approved make and size (2200x1200x750H)mm having seating capacity of 6 numbers with rectanglular shape.Table top made up with 25 mm thick prelam particle board conforming to IS : 12823 Interior Grade with 2mm thick PVC edge beading and bottom made up with 18 mm thick prelam particle board .Table top having concealed wire management to take care of basic wiring requirement .The details need to be as per the instructions of Architect or Engineer, etc. complete.
18
40652
731745
... More
Conference Chair:- Supplying and placing in position an Ergonomic Chair designed for comfort, to provide lumbar support,having 360 Degree swivel base and seat height adjustment levers, high density moulded foam , synchro tilt with height adjustment gas lift, five pronged chrome finish legs with caster wheels.
108
8711
940815
... More
Office Chair 1:- Supplying and placing in position armed revolving high back chair of approved make and colour with HR (high-resilience) foam and fabric seat and and mesh fabric back BIFMA (The Business & Institutional furniture manufactures association) compliant and having features like knee tilt syncronous mechanism with 4 position locking & anti shock feature.PU adjustable Armrests, nylon base with PU castors, neck rest. The back to be upholstered in mesh fabric. Rate shall include of all iron mongeries hardware, fittings, fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer
36
11034
397233
... More
Office Chair 2: Supplying and placing in position armed medium back chair of approved make and colour with HR foam fabric upholstery seat and back rest , BIFMA complaint , PU arms, metal powder coated base, complete with all necessary hardware .
18
8711
156802.5
... More
High Stool:-Supplying and Installing in position Premium leather High Stool having width: 40 centimetres and adjustible height with durable steel frame with a backrest of approved makes brand complete with all accessories complete as directed by engineer.
72
6969
501768
... More
Issue and Collection Counter Supplying and placing in position Issue and Collection counter having Ergonomic design of required shape and size customized as per drawing from approved makes brand as directed by engineer.
18
75497
1358955
... More
2 Seater Workstation:- Supplying and placing in position 2 seater Workstation of size (2400x600x750H)mm .Table top having High grade prelam engineering wood and base of mild steel.Vertical wire riser -1 nos. for wire management from floor to wire tray to be provided from approved makes brand as directed by engineer.
18
29037
522675
... More
Round Table:- Supplying and placing in position Sheesham wood Round Table having 600mm diameter and 400mm in height made in seating area as per clients need from approved makes brand as directed by engineer.
18
17422
313605
... More
Magazine Standee:- Supplying and placing in position wooden Magazine standee (900x530x1200H)mm in seating area having Open storage with 6 shelves each having a width of 50mm as per clients need from approved makes brand as directed by engineer.
36
18584
669024
... More
Over Head Book Shelf: Providing and fabricating Overhead Shelf of size 2300 x 400 x 1200 mm.Top made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 1.5 mm thick laminate of approved make complete as per design and approval of the engg.
18
34293
617279.22
... More
Rack for bags:Providing and fixing rack for bags of size 1750 x 450 x 2000mm.Top made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 1.5 mm thick laminate of approved make complete as per design and approval of the engg.
18
68598
1234767.42
... More
Curved Library Sofa Cum Book rack : Supplying and Installing Curved shaped sofa of customized size having soft cushioning with attached laminated book rack with partions for storage purpose of approved makes brand with all the accessories complete as directed by the engineer .
18
40652
731745
... More
Window Blinds:- Providing verticle PVC blinds for windows to allow precise control over the amount of light entering the room to enhance comfort, reduce glare on screens. Blinds with easy to clean vanes that are the same color on the front and back. 33 inch wand draw control for one way right or left stack.
147
2787
409777.2
... More
N. ELECTRICAL ITEMS
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required
594
80
47520
... More
Supply of 2 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
(3) 2 Core 4 sq.mm
378
250
94500
... More
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
(2) 2 x 4 Sq. mm.
72
212
15264
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
(4) 4 Core 6 sq.mm
450
554
249300
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required.
(3) 4 x 6 Sq. mm.
36
287
10332
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
828
88
72864
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.
-
-
-
... More
(b) 2x2.5 sq.mm +1x2.5 sq.mm earth wire(20 mm Conduit)
6030
330
1989900
... More
(c) 2x 4 sq.mm + 1x 4 sq .mm earth wire(20 mm Conduit)
738
400
295200
... More
(d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit)
918
518
475524
... More
(h) 4 x 2.5 sq.mm + 2 x 2.5 sq.mm earthwire (25mm Conduit)
918
519
476442
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
(f) Group C -- with Cat B Modular Accessories
252
1666
419832
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
108
600
64800
... More
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.
(b) Cat B
54
821
44334
... More
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required
(b) Cat B
630
596
375480
... More
Supplying and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch on board the modular surface/recessed PVC/GI modular box by suitably increasing its modular capacity, modular plate and cover including connection painting etc. as required.
(b) Cat B
54
455
24570
... More
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required"
(b) Cat B
72
2967
213624
... More
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required
(a) Cat 6
2898
76
220248
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
(a) 20 mm
2322
172
399384
... More
(b) 25 mm
576
185
106560
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required.
b. CAT B
216
685
147960
... More
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)
(e) 8 way (8+24), double door, Vertical type, Cat B
18
16683
300294
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)
(g) 12 way double door Cat A
18
2733
49194
... More
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required
(e) 40 A, Cat B
18
5309
95562
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
... More
(f) SP, Cat B
504
352
177408
... More
(h) DP, Cat B
36
139
5004
... More
Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department.
18
1151
20718
... More
Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.
(b) 10 to 40 A
18
5819
104742
... More
Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, p.f. 0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.
144
1889
272016
... More
Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board
for surface type or spring loaded mounting clips complete with minimum 2 yearswarranty as per specification No. FG-IDF/LED.
216
2487
537192
... More
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
18
1224
22032
... More
Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
18
2440
43920
... More
Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs.at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.
18
455
8190
... More
Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (b) Cat B
90
5609
504810
... More
Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.
90
107
9630
... More
Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.
90
205
18450
... More
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
135
241
32535
... More
Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board.
90
191
17190
... More
Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
72
37507
2700504
... More
Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material.
144
7838
1128672
... More
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
72
3454
248688
... More
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
216
831
179496
... More
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater /AC system.
216
134
28944
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.
b. 25mm outer dia.
216
432
93312
... More
Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as perdirections by the site engineer.
360
154
55440
... More
Providing ABC powder type fire extinguisher of 4 kg capacitywith necessary clamp for erection on wall.
18
2764
49758.66
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
c. 200mm width x 50mm depth (16 SWG)
648
778
504144
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
c. 200mm width x 50mm depth (16 SWG)
36
1328
47808
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
c. 200mm width x 50mm depth (16 SWG)
144
2087
300528
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements