Info Tech Corporation Of Goa Limited Tender
View complete overview of Goa ITG Tender
Costs
EMD
₹ 8,20,033Document Cost
₹ 15,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ITG_17909_1Bid Award Id
ViewTender No
PERNEM QUEPEM GA01REN04Tender Authority
Info Tech Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
BRICK MASONARY WORKS
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. (AS PER DRAWING)
45
2211
99495
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
52.5
5186
272265
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level
52.5
6075
318937.5
Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in superstructure upto floor five level. 230 x 110 x 80 mm
91.5
7638
698877
PLAIN CEMENT CONCRETE WORKS
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All works upto plinth level
22.5
6810
153225
WOOD WORKS
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. : Second class Indian teak wood
0.5
167470
83735
Providing wood work in frames of false ceiling, partitions etc., sawn and put up in position.
Second class matti wood
3
104851
314553
Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters.
35mm thick including anodized aluminium butt hinges with necessary screws:
68
3809
259012
Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete
136
864
117504
Providing & fixing in partition 4 mm thick with Marine plywood of approved quality including fixing in frames with brass screws etc. complete with 50 x 12 mm First class Indian teak wood beading (frame to be paid separately)
344.5
1183
407543.5
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
Shutter Thickness : a) 32mm
24
4480
107520
FRP (Fiber Reinforced Polymer) Frames
Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.
Specified Cross Section : b) 4” x 2”
75
739
55425
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
b)40 x 3 mm flat iron hold fast, 15 cm long
120
99
11880
Providing and fixing bright finished brass handles with necessary screws etc complete
-
-
-
125 mm
30
169
5070
100 mm
30
128
3840
Providing and fixing bright finished brass door latch with necessary screws etc complete
250 x 16x 5 mm
30
1599
47970
Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
30
395
11850
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete
-
-
-
150 x 10 mm
30
345
10350
100 x 10 mm
30
258
7740
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)
29
12736
369344
Providing & fixing Stainless Steel tubular lever DType mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete
15
3889
58335
Providing & fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
15
1448
21720
STEEL AND ALUMINIUM WORK
Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section
Plain glass
7
3191
22337
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.
Figured glass
9
3228
29052
Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
159
215
34185
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.
In R.S. joists, channels, angles, tees
40
13711
548440
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
14000
184
2576000
FLOORING AND FLOOR FINISHES
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete : Light Shades (Toilet)
27.5
926
25465
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 450
180.5
892
161006
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. : 60 mm thick in all colours except grey (M35 grade)
90
1200
108000
Providing & laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours & shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement & matching pigment etc., complete b) 600 x 600 light shades
1125
1057
1189125
Providing & fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % & conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps & dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete
b) 600 x 600 light shades
450
980
441000
Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete
-
-
-
300 x 300 mm Design - Liner
28
985
27580
300 x 300 mm Design - Buttons
58.5
985
57622.5
Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : 20 mm thick.(Verandah + Verandah Skirting)
111
1581
175491
Providing and fixing Vinyl flooring of approved shade and design with adhesive complete.
825
925
763125
Providing and laying engineered wooden floor skirting of height 75mm of approved make (armstrong/ ego ) laid as shown in drawing including adhesive also includes in the item.the item also include levelling with plaster of paris if required & as per instruction of engineer in charge.
926.5
1560
1445340
ROOFING & CEILING WORKS
Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.
280
401
112280
Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.
252
2236
563472
The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Glass Wool Insulation with FSK facing 50mm with 24 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
-
-
-
Providing & Fixing of Aluminium Lay-in Perforated Tile Ceiling on 24 /14 mm ‘T’ Framework of module 600mm x 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. Perforation of the tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling. The tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. The Tile shall be Polyester based, powder coated in white colour. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 24 /14 mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm G.I. rod from slab/roof. The suspension shall be provided at 1200 to 1500mm centre to centre. Tee framework would be made of GI and Powder coated. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption.
750
1793
1344750
Providing and fixing 12mm thick plaster of Paris (gypsum anhydrous) ceiling tiles upto a height of 5m above floor level over wooden frames rendered smooth with plaster of paris (gypsum anhydrous) (frame work to be paid separately)
750
723
542250
PLASTERING AND FINISHING WORKS
12mm cement plaster 1:4 (1 cement : 4 fine sand)
3780
223
842940
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) & top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
Extra for providing & mixing water proofing material proportion recommended by the manufacturers, 12mm cement plaster 1: 3 (1 cement : 3 sand)
750
339
254250
Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.
3780
19
71820
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
1800
114
205200
Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.
1980
114
225720
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3780
89
336420
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
3780
51
192780
Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.
202.5
58
11745
Applying priming coat with ready mixed primer of approved brand & manufacture on steel work
457.5
51
23332.5
Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade
457.5
73
33397.5
Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade.
967.5
72
69660
Painting (one or more coats) with synthetic enamel paint of approved brand and manufacture in all shades on old work to give an even shade.
135
72
9720
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
135
161
21735
Melamine polishing on wood work (one or more coat) : Glossy
202.5
991
200677.5
DISMANTLING DEMOLISHING & REPAIRS WORK
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.
76
27
2052
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead
-
-
-
Of area 3 sq.m. and below
30
206
6180
Area beyond 3 sq.m.
30
266
7980
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. ( only roof )
1020
330
336600
Dismantling and removing mangalore roofing tiles from roofs including ridges, hips, valleys, sheets wind ties etc. but excluding battens, roof timber etc. and stacking materials within a distance of 50 mt.
1020
52
53040
Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
75
958
71850
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
75
1136
85200
Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.With cement mortar 1:4 (1 cement : 4 fine sand)
300
314
94200
Dismantling rolling shutters, top covers & shafts etc. for replacement of springs ball bearing complete & refixing the shutter after replacement of springs & ball bearing (cost of replacement parts excluded) including all labour & returning the unserviceable parts to the department complete (existing shutter size 2.00m x 2.40m)
300
245
73500
Dismantling the tile & stone work in all thickness in floors laid in single /multiple layers (ceramic/mosaic/kotha or any other flooring etc) in cement /adhesive as case may be including stacking of dismantled materials within 50 Meters lead etc complete. Note :- Single plan area for (ceramic +misaic + any other flooring) will be considered for payment.
900
330
297000
Dismantling the tile /stone work in dados /cladding /skirting at all levels laid in cement mortar including stacking of unserviceable materials within 50 metres lead for thickness of tiles /stone 8mm to 30mm as directed by Engineer
900
110
99000
Scraping of existing Neeru/POP /wall putty from the wall /ceiling surface so as to expose the existing plaster including disposal of all rubbish /dust created at all leads and lift as directed by Engineer
6000
15
91680
Dismantaling and removing of existing Storage cabinets/Counters made up in plywood/Prelam board of all sizes and fixed over with laminate/veeners etc and disposal of all dismantled unserviceable material at all leads and lifts as directed by Engineer
30
1500
45000
Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead.
1125
38
42750
Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
3061.5
79
241858.5
Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW
300
10
3000
Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW
1800
7
12600
Dismantling the existing Aluminium/copper mains,submains wiring upto 10 sq.mm. along with accessories etc.Complete as per specification No: WG-DM/PW
1800
6
10800
Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp /LED fitting from wall with brackets and making the site as original complete.
330
52
17160
MISCELLANEOUS
Providing preconstruction anti – termite treatment to the buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as mentioned therein with the cost of all materials chemicals, plants, equipments etc. required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building.
b) Post Construction
868
88
76384
Aesthetic Item to showcase the Local,National or State Theme.
-
-
-
PVC wall paneling :Providing and fixing PVC sheet Wall Paneling of thickness 5mm (±0.25) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25) thick Prelam PVC sheet. The panel & strips shall be of 600 kg/Cbm Density Manufactured by an ISO-9000 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm(±0.25) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.
360
1768
636480
SIGNAGES -Providing and Fixing of signages on Acrylic/ SS Plates with all necessary cutting/ fitting work etc.
60
8000
480000
Goa BLUE Mural Tiles -Providing & Fixing on site facade : Goa Mural tiles out of / in - 10 mm th , pattern as per Design / picture provided by Architect/ engg..The Size will be as per front Elevation drawing provided .
150
3000
450000
Providing and Fixing of Vertical Roof Vent/ Extractor- SS/ Metallic or Manufacturer's Specifications– Vertical Roof Extractor (Brand "Proflex" or equivalent) with all necessary cutting/ hardware work and making good the roof surface & water proofing etc.
30
10000
300000
WATER SUPPLY,SEWERAGE,PLUMBING AND SANITATION WORKS
Providing and & fixing white vitreous china wash basin including making all connection but excluding the cost of fittings :
Flat back wash basin of size 550 x 400 mm
15
2577
38655
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
15
10687
160305
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993
a. 15mm nominal bore
45
1484
66780
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 a. 15mm nominal bore
15
1525
22875
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
15
1648
24720
Providing and fixing toilet paper holder : a. C.P. Brass
15
1385
20775
Providing and fixing P.V.C. connection pipe with
brass unions 15 mm nominal bore:
a. 45 cm (18”) length .
120
235
28200
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
15
2130
31950
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws
a. Glass container
15
2061
30915
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.
b. 500 lit. capacity
15
5044
75660
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :
b. 150 x 100 mm size –P or S type
30
2977
89310
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. d. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
60
10768
646080
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
110 mm dia
300
295
88500
75 mm dia
300
157
47100
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
b. 75 mm dia
90
214
19260
Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, with door :
b. 75 mm dia
90
127
11430
Providing and fixing stainless steel cockroach trap with grating, 150 X 150 mm of (Approved brand and make) including sealing of edges with white cement and accessories etc. complete as per the direction of engineer.
30
464
13936.5
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
a. 110 mm dia
30
170
5100
Providing and fixing Brass metal ball valves half turn of approved quality and make etc. complete. with pressure rating up to 20 bars.
b. 40mm Nominal bore
60
1496
89813.4
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
15
465
6975
Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. :
15
4725
70875
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 : 15mm nominal bore
15
1290
19350
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.
-
-
-
15 mm dia nominal outer dia pipes.
225
201
45225
20 mm dia nominal outer dia pipes.
225
255
57375
25 mm dia nominal outer dia pipes.
225
329
74025
32 mm dia nominal outer dia pipes.
225
472
106200
Supply and fixing steel fibre reinforced concrete manhole covers with frame made as per IS 12592 Part I & II (1991) concrete with M-450 provided with normal steel reinforcement in addition to steel fibres of 40 mm. of aspect ratio 7 to 8 complete with lifting hook 18 of SWG lapping plate with covers etc. complete.
II) d Medium duty (600 x 600 mm) weight not less than 110 kg.
15
2025
30375
ELECTRICAL ITEMS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
(f) Group C -- with Cat B Modular Accessories
375
1666
624750
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.
-
-
-
2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)
1125
281
316125
2x2.5 sq.mm +1x2.5 sq.mm earth wire(20 mm Conduit)
1125
330
371250
2x 4 sq.mm + 1x 4 sq .mm earth wire(20 mm Conduit)
1125
400
450000
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
225
600
135000
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
1875
172
322500
25 mm
975
185
180375
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.
b. Cat B
150
821
123150
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required
b. Cat B
75
596
44700
Supplying and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch on board the modular surface/recessed PVC/GI modular box by suitably increasing its modular capacity, modular plate and cover including connection painting etc. as required. b. Cat B
150
455
68250
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)
e. 8 way (8+24), double door, Vertical type, Cat B
15
16683
250245
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required
e. 40 A, Cat B
75
5309
398175
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
f. SP, Cat B
225
352
79200
Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. b. Cat B
60
5609
336540
Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required.
60
517
31020
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
d. 300mm width x 50mm depth
300
993
297900
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required
d. 300mm width x 50mm depth (16 SWG)
75
1715
128625
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
d. 300mm width x 50mm depth (16 SWG)
75
2727
204525
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required"
b. Cat B
75
2967
222525
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required
a. Cat 6
750
76
57000
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. b. CAT B
75
685
51375
Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
15
2440
36600
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
225
1224
275400
Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD20%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.
75
455
34125
Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
300
241
72300
Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board.
60
191
11460
Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department.
15
1151
17265
Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.
(b) 10 to 40 A
15
5819
87285
Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
30
37507
1125210
Hard PVC drain pipe of 25 mm Thick with 9 mm tubular insulation
150
325
48750
6 core flexible cable 2.5 sqmm sqmm
450
558
251100
MS stand to mount outdoor units
30
600
18000
Lifting,Shifting of Indoor & Out door unit to floor level
30
1200
36000
Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material.
60
7838
470280
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
30
3454
103620
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
450
831
373950
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater /AC system.
450
134
60300
INTERIOR AND FURNITURE WORKS
Reading Table: Providing and fixing of reading tables of size 900mm x 500mm x 750mm height with 25-30mm Prelam/ HDHMR Top fixed over 25mm of M.S. Powder Coated Frame with 40m x 40m thick MS support legs. (size as per drawing #)
60
8000
480000
Conference Table:- Supplying and Installing in position conference table of approved make and size having seating capacity of 4 number with Table Top of circular Shape,having table top made up with 25 mm thick prelam particle boardconforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding and The understructure leg made up of prelam Particle boards / MDF board with 2mm thick PVC edge banding. Gable ends in 25mm thick and modesty panels of 18mm thk. if required or 25 mm thk. metal leg with polish finish,table top having concealed wire management to take care of basic wiring requirement and having pre-fitted side opening flip top box for providing power-data-voice switches on a modular switch plate.The details need to be as per the instructions of Architect or Engineer, etc. complete. (Size- 4 Seater, minimum 900mm dia)
15
20000
300000
Conference Chair:- Supplying and placing in position an Ergonomic Chair designed for comfort, to provide lumbar support, they have 360 Degree swivel bases and seat height adjustment levers, high density moulded foam with ply backing, synchro tilt with height adjustment gas lift, five pronged chrome finish legs with caster wheels.
60
23230
1393800
Office Chair: Supplying and placing in position armed medium back chair of approved make and colour with HR foam fabric upholstery seat and mesh fabric type back , BIFMA complaint , PU arms, metal powder coated base, complete with all necessary hardware . Size ; 450x450 x 750 mm height ( as per detail drawing)
45
20907
940815
Reading Chair: Supplying and placing in position library reading chair, out of metal & PU / Moulded plastic 50mm & leather seat cushion as per clients need from approved makes brand as directed by engineer . size - 450x450x 700 mm height as per detail drawing.
195
3500
682500
Kids Chair: Supplying and placing Children chair,Moulded: Plastic, Make: Supreme , size - 300x300x 550 mm height ( as per detail drawing)
45
2000
90000
LIBRARIAN/ STAFF DESK - Providing and supplying of L-shaped desk of size 1355mm x 1570mm x 900mm height with a 300mm x 50mm wide top cantilever visitor top counter. top, sides and bottom to be made of 25mm thick MR commercial ply of apporved make.The side unit to have drawer with all necessary hardware etc. (as per drawing #) Top, sides and interior to be finished in 1mm white Laminate prior approved complete. Provide necessary grooves, internal shelves/ storage, 100mm high skirting etc. as per detail drawings/ instruction of the engineer in charge.
30
32400
972000
Round Reading Table:- Supplying and placing in position Round Table in seating area as per clients need from approved makes brand as directed by engineer. Size: 1000mm dia x 750mm height (color as approved). Including cutout for wire manager etc.(size as per layout drawing)with 25-30mm Prelam/ HDHMR Top fixed over in 75 dia SS Support as/ ref image. (ii) size 900mm or 1200mm dia as per layout and detailed drawing.
30
10000
300000
Lockers:-Supplying and Installing in position office lockers having polished surface with powder coating surface having manual automation grade in the shape of square of approved makes brand with all accessories as directed by the engineer.
15
15000
225000
Periodicals rack :- Providing and supplying of periodical rack of size 700mm x 300mmx 1200mm height made of 25mm thick HDHMR / ply finished with 1mm laminate / veneer of approved make and color (Source: Merino Laminates/ Greenlam/ or equivalent approved source). With necessary Tapping/ hardware/ fittings, complete as per detail drawing/ instructions of the architect.
15
10000
150000
Book rack :- Providing and supplying of Book racks of size as per drawing made of 25mm thick HDHMR / ply finished with 1mm laminate / veneer of approved make and color (Source: Merino Laminates/ Greenlam/ or equivalent approved source). With necessary Tapping/ hardware/ fittings, complete as per detail drawing/ instructions of the architect. Intermediate shelf - 300 to 450mm variations made in 25 mm ply/ HDHMR PU LIPPING all completed as per layout and refernce image.
-
-
-
a) Vertical free standing (Size- 1200mm x 350mm x 2100mm)
30
42000
1260000
b) Vertical free standing (Size- 1200mm x 500mm x 1200-1500mm)
30
35000
1050000
c) low height curvilinear free standing (Size- 900mm x 300mm x 1200-1500mm)
15
12000
180000
d) low height vertical free standing (Size- 1800mm x 300mm x 1200-1500mm)
15
22000
330000
Curve Library Sofa : Supplying and installing sectional fully upholstery sofas as/ drg and reference image . Fabric base rate 400 rs/ rm.
15
47000
705000
Center table : Providing and supplying of center table design and make as per approval. Supplying and placing in position Round Table in seating area as per clients need from approved makes brand as directed by engineer. Size: 600mm dia x450mm height (color as approved). .(size as per layout drawing) with 25-30mm Prelam/ HDHMR Top fixed over 75 dia SS Support .
15
6000
90000
E-LIBRARY/ IT ZONE KIOSK - Providing and supplying of Digital kiosk equipped with e-books, audio/video facilities, WiFi etc. Kiosk to have a digital screen of 24" on front side , as per vendor specs/ detail drawings
15
26500
397500
KIDS READING TABLE - Providing and fixing of reading tables as per clients need from approved makes brand as directed by engineer with 20mm Prelam/ HDHMR as/ item 1.GC Top fixed over 25mm of M.S. Powder Coated Frame with 25m MS support leg. / Moulded: Plastic (size as per layout drawing) size - 1300x 950 ( as per layout and detailed drawing)
15
12000
180000
OTTOMAN - Providing and supplying of ottoman of size 300 dia x 450 mm (H) with skirting 40mm of ply base with 1mm laminate & fully upholstery with foam & fabric with all necessary hardware ect as per drawing / ref. image.
15
5500
82500
Window Blinds:- Provding Fabric blinds/ / openings for external walls for protection from storm water splashings.
165
2904
479160
Indoor Plants:-Providing Indoor plants of required type.
45
6500
292500
SOFT BOARD - Providng and fixing 12mm thick soft board of 900mm height along the length of specified masonry walls of low density fibreboard of approved make as per detailed drawing. The soft board to be finished in fabric of approved make and color with near edges (Fabric base rate= Rs. 450/m). Including cut-out for switch boards, etc. complete as per detail drawing and specification of Architect/ Engineer.
67.5
3835
258862.5
Card Holder Rack - Providng and supplying of Card holder racks of size 900mm x 1200mm x 150mm wide with horizontal divisions and 75mm high skirting. Horizontals and Verticals to be made of 25mm thick MR plywood finised with 1mm Laminate of approved make and color ( Source: Merino Laminates/ Greenlam/ or equivalent approved source). Necessary hardware/ fittings complete as per directions of Engineer in charge. (size as per drawing )
30
12000
360000
PARTITION- Providing and fixing partition upto 2400mm (as per dwg#) consisting of G.l. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.l. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete
75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)
180
1818
327267
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements