Info Tech Corporation Of Goa Limited Tender
View complete overview of Goa ITG Tender
Costs
EMD
₹ 3,27,556Document Cost
₹ 6,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ITG_7260_1Bid Award Id
ViewTender No
PARAISO DE GOA/2022-23/202/3052Tender Authority
Info Tech Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
EXECUTIVE TABLE FOR CHAIRMAN AND MANAGING DIRECTOR
SIZE : 2200mm(L)X900mm(D)X750mm(H) , (SIDE TABLE SIZE : 1650mm(L)X450mm(W)X700mm(H)
Supplying and installing in position main table of approved make, colour and size 2400mm(L)X900mm(W)X750mm(H) with a curved top made up of 25 mm thick exterior grade. The pedestal unit of size 350mm(L)X450mm(W)X550mm(H) with top made up of 25 mm thick prelaminated particle board with post formed edge profile & sides in 18 mm thick prelaminated particle board and 75 mm height skirting with 2mm thick PVC edge banding & sealed edges in 0.8 mm thick PVC edge banding. The pedestal will have three equal size drawers with front fascia having central locking system & full length aluminium G profile handles/ 4"SS 304 grade brush finish handles ,roller slide mechanism and casters for added mobility All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer .
2
-
-
BACK STORAGE UNIT FOR CHAIRMAN CABIN ( SIZE :5000mm(L)X425mm(D)X750mm(H)
Supplying and installing in position back storage of approved make, colour and size with top made up of 25 mm thick prelaminated particle board to be extended in one piece as specified & having storage body made up of 18mm thick exterior grade pre laminated particle board, back of the unit made up of 9 mm thick particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC edge banding & sealed edges are in 0.8 mm thick PVC edge banding. Two equal size shutters fixed with s.s. brush finish brass hinges & full length aluminium G profile handles / 4'' s.s 304 grade brush finish handles, premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick prelam particle board with 2 mm thick PVC edge banding on exposed sides & sealed edges in 0.8mm thick PVC edge banding. All material shall be of approved make. All complete as per the drawing / Image, technical specification and direction of the Engineer.
2
-
-
SIDE TABLE (T21) (SIZE:600mm(L)X600mm(D)X450mm(HT) Providing & installing in position wooden side table made of size 600mm(L)X600mm(D)X450mm(HT) teak wood of square shape with wooden legs in horizontal & vertical frame of size 50x50mm and 10 mm thick plain glass on top fixed in 10 mm groove made in horizontal wooden members. The table shall include necessary hardware fittings, fixtures etc. The table will be finished with 3 coats of melamine polish of approved colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
2
-
-
RECEPTION TABLE (B1) (Size- 2000mm(L) x 600mm(W) x1140mm(HT) Providing & fixing in position Reception table in 19 mm thick Marine BWP (boiling water proof) plywood with 50mm thk ledge box finished with corian make acrylic surface on the outside and 1 mm laminate inside , ms powder coated keyboard trays with accommodation of mouse pad and 2 nos of fixed drawer units with 3 no of drawers each made up of 19 mm thick plywood front fascia, 12 mm ply for sides and back, with 6 mm ply for base, side supports to be run on telescopic side mounted channels including central locking arrangement, heavy duty brushed stainless steel 'D' handle (4") , all exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of laminate with necessary labour, Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. Table switches have independent wire manager and MS powder coated CPU trolley of standard size, S.S 304 grade hardware, cleaning, placing in position, etc. complete.
All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
1
-
-
MAIN CONFERENCE TABLE (B2) (Size- 3000mm(RM L) X 1200mm(W)X 750MM(HT)
Providing & fixing in position Conference table in 19 mm thick Marine BWP (boiling water proof) plywood for top & vertical supports & finished with 4 mm veneer & all exposed edges to be finished with 38x12mm thick wood lipping having a 6mm design groove & with 3 coats or more of melamine polish to match the shade of veneer with necessary hardware & labour.The table top will be fixed with a modular pop-up box to make provision for wire management to take care of basic wiring requirement for power data- voice,VGA switches.The work will include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
1
-
-
SOFA Supplying & placing in position sofa having solid frame structure with inner frame made of kiln chemical treated approved high quality wood.The seat cusion to be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft.The thread used to be nylon bonded to provide lasting stitch strength.The backrest to be made of 3 inch foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions to have 2 inches of elastic webbing of 250 gsm with diagonal weave.The thread used to be nylon bonded to provide lasting stitch strength.The outer finish to be of superior quality leatherette stictched with nylon bonded thread.The legs to be of s.s 304 grade tubular section of dia 75mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm)
-
-
-
3 SEATER SOFA
1
-
-
SINGLE SEATER SOFA
2
-
-
Center table
1
-
-
EXECUTIVE CHAIRS
EXECUTIVE CHAIRS FOR DIRECTORS & JOINT DIRECTOR (C1) Supplying and placing in position armed revolving high back chairs of approved make and colour, BIFMA (The Business & Institutional furniture manufactures association) compliant and having features like knee tilt syncronous mechanism with 4 position locking & anti shock feature & 2way adjustable lumbar support.PU coated adjustable Armrests with 4 position height & width adjustment & adjustable head rest , The back to have mesh fabric & leatherite for Seat. Die Cast Aluminium Base with PU Castors as per approved image and make etc.Rate shall include of all iron mongeries hardware,fittings,fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
3
-
-
STAFF CHAIRS
Supplying and placing in position armed revolving medium back chair of approved make and colour with HR (high-resilience) foam seat and back BIFMA (The Business & Institutional furniture manufactures association) compliant and having features like knee tilt syncronous mechanism with 4 position locking & anti shock feature. PU adjustable Armrests, nylon base with PU castors. The back and seat upholstered in fabric. Rate shall include of all iron mongeries hardware,fittings,fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
40
-
-
LOW HEIGHT STORAGE CABINET (SIZE:1800mm(L) x400mm(D)x750mm(HT) Supplying and installing in position storage cabinet of approved make, colour and size 900mm (L) X400mm(W) X750mm(HT) top made up from 25mm thick exterior grade pre laminated particle board. The back of the unit is made from 9mm prelaminated particle board. All the exposed edges are to be with 2mm PVC edge banding and sealed edges are with 0.8mm thick PVC edge banding and with equal size shutters fixed with s.s. brush finish brass hinges & full length aluminium G profile handles / 4'' s.s 304 grade brush finish handles, premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick prelam particle board with 2 mm thick PVC edge banding on exposed sides & sealed edges in 0.8mm thick PVC edge banding.. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
75
-
-
File Storage:- Supplying and installing in position storage in 19 mm thick Marine BWP (boiling water proof) plywood with shutters in 19mm thick BWP (boiling water proof) plywood fixed on SS. brush finished brass 'L' hinges & 100 mm height SS 304 grade handles. The cabinet to have 19mm thick plywood shelves fixed on shelf buttons, back sheet in 8mm plywood & finished with 1mm thick laminate externally and 0.8mm thick laminate internally. All exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of laminate & with necessary labour, S.S brush finish hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Size 1200x450x1200mm(HT))
6
-
-
GRID FALSE CEILING Providing and fixing of PVC coated Gypsum tile Suspended Ceiling System using pre coated (Exposed portion only) GI T Grid system in 600x600mm module which includes providing and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers & then suspending the main tee from the soffit with help of soffit cleat, rawl plugs and wire rod with leveling spring clip at 1200mm c/c. 1200mm Cross Tee shall be interlocked into the pre-cut slots in the main Tees at 600mm centers in direction perpendicular to the main Tee to make a grid of 600x1200mm. 600mm Cross tees shall be interlocked into the pre cut slots in the 1200mm tees at 1200mm centers and in direction parallel to the main tee. Cross Tees having length more than 600mm shall be supported independently. The tile shall be of size 595x595mm & 9mm thick, square edge with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film. The tile shall have light reflectance 75%, humidity resistance of 90% and thermal conductivity of 0.24 W/m⁰K. The gypsum tile shall be placed into the grid size of 600x600mm. The item also includes providing cutouts for electrical fixtures etc. Marking has to be provided for Sprinkler, Smoke Detectors etc. on the ceiling and also templates have to be provided and fixed in the ceiling made of 12mm BWR (boiling water proof) Plywood. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
167.5
-
-
VERTICAL BLINDS
Providing & fixing in position vertical blinds 100 mm wide approved fabric and of approved make, colour with head rail of 25mm height and 47mm wide extruded high strength anodised aluminium alloy section. End control unit state of art reduction ratio of 3:5:1 for a very smooth operation of the blind. It shall include all necessary fittings and fixtures like tilt rod, tilter chain , carrier/ runner, spacers, installation bracket, cord weight, cord, bottom mechanism consisting of weight and chain etc. complete. All material shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.
85
-
-
TABLE FOR CAFETERIA Supplying & installing in position cafeteria table in 25 mm thick mdf top with PVC membrane foil, with profiled edge to prevent striping of foil, bottom surface with understructure of Mild steel powder coated pipe of dia 38mm and 2 mm thick , understructure fitted to top by stainless steel machine screws. The table will have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. CAFETERIA TABLE (T18) (SIZE:1200mm(L) X750mm(D) x750mm(HT)
1
-
-
EXECUTIVE TABLE WITH PEDESTAL & SIDE TABLE FOR CO-ORDINATOR ROOM, OFFICE FOR CELL & OFFICE FOR DEPARTMENT (T9) (TABLE SIZE:2100mm(L) X 750mm(D) X 750mm(H) , SIDE TABLE SIZE :1650mm(L)X450mm(D),X700mm(H)
Supplying and installing in position main table of approved make, colour and size 2100mm(L)X750mm(W)X750mm(H) with a curved top made up of 25 mm thick exterior grade prelaminated board with post form finish on 2 sides & 2mm PVC edge banding and supported on gable ends/sides made out of 25mm thick prelam particle boards & modesty panels in 18mm thk prelam particle board. Gable ends & modesty exposed edges are in 2 mm thick PVC edge banding & sealed edges are in 0.8 mm thick PVC edge banding. Wire routing/ wire management shall be provided on main table or side table as specified. Table should have independent Mild steel powder coated CPU trolley, wire manager and Mild steel powder coated key board tray of standard size. The keyboard tray to accommodate mouse pad. The side table of size 1650mm(L)X450mm(W)X700mm(H) with top made up 25 mm thick exterior grade prelam particle board top with 2mm post forming on 2 sides & 2mm PVC edge banding & supported on 25mm thk gable ends & 18mm thk modesty panel with 2 mm thick PVC edge banding on exposed sides & sealed edges are in 0.8mm thick PVC edge banding.The pedestal unit of size 350mm(L)X 450mm (W)X550mm(H) with top made up of 25 mm thick prelaminated particle board with post formed edge profile & sides in 18 mm thick prelaminated particle board and 75 mm height skirting with 2mm thick PVC edge banding & sealed edges in 0.8 mm thick PVC edge banding. The pedestal will have three equal size drawers with front fascia having central locking system & full length aluminium G profile handles/ 4"SS 304 grade brush finish handles ,roller slide mechanism and casters for added mobility All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer .
1
-
-
PARTLY GLASS PANELLED & PARTLY SOLID PARTITION WITH LAMINATE FINISH AND GLASS DOOR
Providing & fixing in position, full height partly glass panelled & partly solid partition made of treated salwood framework of size 38mm x 50mm having grid spacing at 600mmx600mm centre to centre both ways & covered with 12 mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. The partition will have an opening as per the height specified in the drawing. Glass of thickness 12 mm will be fixed in the opening with wooden beading of size 38mm x 12 mm on both sides. Wooden beadings will be finished in three or more coats of melamine polish (glossy/matt) including final coat of buffing till the required finish is achieved . All hidden framework to be painted with black japan paint.
Glass door shall be made using 12 mm thick toughened glass with 100 mm high plywood frame with laminate finish, fixed using double action floor spring, top patch, bottom pivot in SS brush finish and s.s. 304 grade handles of size 200mm. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
5
-
-
FULLY GLASS PANELLED PARTITION AND GLASS DOOR Providing & fixing full height glazed partition upto 2400 mm height with 12 mm thk toughened glass, 35x12mm thick teak wood beading on all sides , The beading shall be finished with three or more coats of melamine polish (glossy/matt) including final coat of buffing till the required finish is achieved .Solid sandwich partition above lintel level & upto slab bottom using 38 X 50mm treated Salwood frame having grid spacing at 600mm centre to centre both ways & sandwiched by 8 mm thk plywood & 12 mm gypsum on both sides. All hidden framework to be painted with black japan paint. 100mm in height plywood skirting to be finished with 1 mm thk laminate of approved make/ color/ sample on both the sides. Glass door shall be made using 12 mm thick toughened glass with 100 mm high plywood frame with laminate finish, fixed using double action floor spring, top patch, bottom pivot in SS brush finish and s.s. 304 grade handles of size 200mm. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
10
-
-
SOLID PARTITION FINISHED WITH LAMINATE
Providing & fixing in position full height solid partition made out of aluminium framework of size 65mm x 38 mm tubular frame ,18 gauge having grid spacing at 600mm x600mm center to center both ways & covered with 12 mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. All material will be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
120
-
-
LOW HEIGHT SOLID PARTITION Providing & fixing in position low height solid partition made out of aluminium framework of size 65mm x 38 mm tubular frame ,18 gauge having grid spacing at 600mm x600mm center to center both ways & covered with 8 mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. All material will be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
60
-
-
SINGLE SHUTTER DOOR IN PARTITION (SIZE - 1200 mm (L) X 2400 mm (HT) Providing & fixing in position frameless factory made solid core water proof flush door shutter of size 1200mm x 2400mm x 35 mm thick & finished with 1mm thick laminate of approved colour & texture on both sides & teak wood lipping of size 37x12mm on edges of shutter. The door shall be fixed on SS. brush finished brass butt hinges & provided with a surface mounted hydraulic door closer, SS matt finish concealed mortise lock case with lever handle, profile thumb turn cylinder (with key outside & thumb turn inside) with key hole, PVC door buffer & SS brush finish door stopper. All exposed teak wood lipping shall be finished with 3 coats or more of melamine polish (Matt/Gloss) to match the colour/ shade of the laminate including final coat of buffing till the required finish is achieved. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
5
-
-
SINGLE SHUTTER DOOR WITH VISION PANEL IN PARTITION
Providing & fixing in position frameless factory made solid core waterproof flush door shutter of 35 mm thick & finished with 1mm thick laminate of approved colour & texture on both sides & teak wood lipping of size 37x12mm on edges of shutter. The shutter shall be provided with a vision panel of size 275x600mm using glass of 8 mm thickness fixed with teak wood beading of size 19x12mm on both sides. The door shall be fixed on SS. brush finished brass butt hinges & provided with a surface mounted hydraulic door closer, SS matt finish concealed mortise lock case with lever handle, profile thumb turn cylinder (with key outside & thumb turn inside) with key hole, PVC door buffer & SS brush finish door stopper. All exposed teak wood lipping shall be finished with 3 coats or more of melamine polish (Matt/Gloss) to match the colour/ shade of the laminate including final coat of buffing till the required finish is achieved. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number - IN - 610).
-
-
-
SIZE - 900 mm (L) X 2400 mm (HT)
2
-
-
SIZE - 1200 mm (L) X 2400 mm (HT)
2
-
-
MAIN ENTRANCE DOOR (Size- 2115mm(L) x 2400mm(HT)
Providing and fixing main door using 12mm thick toughened glass. The door shall have two shutters fixed on stainless steel patch fittings at top and bottom with double action stainless floor spring at bottom corner and both shutters shall have stainless steel lock at floor level. Plywood architrave/ frame using 19mm+19mm +12mm Marine BWP (boiling water proof) plywood shall be fixed on three sides and finished with 1mm thick laminate. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
1
-
-
DISCUSSION TABLE (T10) (SIZE: 1200mm dia X 750mm(HT)
Supplying and installing in position Discussion table of approved make, colour and size 1200mm dia with top made up of 25 mm thick exterior grade prelaminated board and having superior edge profile with 2mm thick PVC edge banding of matching colour.The understructure of the table is made up of stainless steel 304 grade plate & a vertical support tube of stainless steel 304 grade 90mm diameter. The base to be circular at the bottom and top. The top base to have required holes for fixing table top to it. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
1
-
-
CABINET IN CONFERENCE ROOM (B19) (Size- 1800mm(L) x 600mm(W) x2400mm(HT)
Providing & fixing in position Cabinet in conference room in 19 mm thick Marine BWP (boiling water proof) plywood with 25 mm thickness louvered sandwich shutters in 12mm thick BWP (boiling water proof) plywood framework with 6mm thick BWP ( boling water proof) plywood on both sides fixed on SS. brush finished brass 'L' hinges & 100 mm height SS 304 grade handles and having the louvers in 38x6mm thick wooden lipping. The cabinet to have 19mm thick plywood shelves fixed on shelf buttons, back sheet in 8mm plywood & finished with 3mm thick veneer with 3 coats or more of melamine polish externally and 0.8mm thick laminate internally. All exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer & with necessary labour, S.S brush finish hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
2
-
-
UPS AND BATTERY STORAGE (B20) (Size- 1800mm(L) x 600mm(W) x750mm(HT)
Providing & fixing in position UPS Storage in 19 mm thick Marine BWP (boiling water proof) plywood with 25 mm thickness louvered sandwich shutters in 12mm thick BWP (boiling water proof) plywood framework with 6mm thick BWP ( boiling water proof) plywood on both sides fixed on SS. brush finished brass 'L' hinges & 100 mm height SS 304 grade handles and having the louvers in 38x12mm thick wooden lipping.The cabinet to have 19mm thick plywood shelf fixed in center on shelf button, back sheet in 8mm plywood & finished with 1mm thick laminate externally and 0.8mm thick laminate internally. All exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of laminate & with necessary labour, S.S brush finish hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
2
-
-
KITCHEN COUNTER SHUTTERS Providing & fixing counter shutters in kitchen in 19 mm Marine BWP (boiling water proof) plywood ,1mm thick laminate externally and 0.8 mm laminate internally. Frame for fixing shutters to be 19 mm ply with 0.8 mm laminate finish , all edges to be finished in Teak wood lipping patti with 3 or more coats of melamine polish to match the shade of laminate. SS. brush finished brass 'L' hinges and G-profile aluminium handles to be used as per design. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
12
-
-
PANELLING IN DIRECTOR'S AND CHAIRMAN'S ROOM (Size- 1800mm(L) x 2800mm(HT)
Providing & fixing panelling with 19 mm Marine BWP (boiling water proof) plywood framing at approx 600 centre to centre. 12 mm ply fascia. finished with 6mm back-painted glass pasted with silicon sealant. Also providing recessed LED strip lights on both sides of approved colour with choke and accessories. Cost to include required wire management. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
2
-
-
MIRROR (Size- 900mm(L) x1200mm(HT)
Providing & fixing in position 6mm thickness Mirror on wall using 304 grade S.S studs with crystal polished edges with required accessories. The mirror shall have holes of suitable diameter for fixing SS. studs, with necessary hardware, labour, fixing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
4
-
-
PANELING IN CONFERENCE ROOM (B27)
Providing & fixing in position wall panelling in conference room in 19 mm thick Marine BWP (boiling water proof) plywood fixed with 4mm thk veneer panelling with 3 coats or more of melamine polish of approved shade & in 12mm thick Marine BWP (boiling water proof) plywood fixed with 25 mm thk acoustical wall panels of approved size & make.The acoustical wall panels to have square edges & made up of fiber glass substrate, wrapped on the front side with an acoustically transparent and fire-resistant fabric of approved shade / colour & have a minimum sound absorption level of 0.90 NRC(Noise Reduction coefficient)The panels to be affixed to the 12mm thick ply using panel impalers and construction adhesive supplied by the manufacturer as per the installation instructions laid down by the manufacturer. 3 numbers of surface impalers with impaler clips located approximately 100 mm or more from the panel edge to be fixed to the ply surface using self tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers & ply panels to be pierced through the spikes of the impalers ensuring that the line and level of the panels are maintained All exposed edges of plywood to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer & with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
1
-
-
ACOUSTICAL GRID FALSE CEILING
Providing & Fixing of Mineral Fiber Acoustical Suspended Ceiling System using Microlook edge Tiles with 15 mm exposed grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.90, Light Reflectance 88%, Thermal Conductivity k = 0.032 w/m K, Colour White & black, Fire Performance Class 0/ Class 1 (BS476 Class 6&7) in module size of 600 X 600 X 15 mm / 20 mm, suitable for Green Building application, with Recycled content of 88% (FG). The grid should be of approved make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm and a load carrying capacity of 23.71 Kgs/M2. The T Sections should have a Galvanizing of 120 grams/sqm & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warrantee. INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum center. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm center to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers. SUSPENSION SYSTEM: Should consist of M6 Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26 x 26 x 25 x 1.2mm with a Galvanized Thickness of 80gsm, a pre Straightened Hanger wire of dia – 2.68 mm of 1.83 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip should consist of a 3.5 mm aquiline wire to be used with the main runner. All material should be of approved make. All complete as per the drawing, specification and direction of the Engineer.
40
-
-
PIN -UP BOARDS (SOFT BOARDS )
Supply and installing in position soft display board having aluminum frame including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares and easy fixing to the wall. All material shall be of approved make. All works complete as per the drawing / Image, specification and direction of the Engineer.
-
-
-
SIZE - 1000mm (L) X 350mm (HT)
20
-
-
SIZE - 900mm (L) X 600mm (HT)
20
-
-
NOTICE BOARD (SIZE: 1200mm (L) x 900mm (HT) Providing and fixing in position Notice board of size 1200mm(L) X 900(HT) mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.
4
-
-
MAGNETIC WHITE MARKER BOARD (SIZE : 2400mm(L) x 1200mm(HT)
Providing and fixing in position approved Magnetic white matt finish marker board of (SIZE - 2400 X 1200 ) having Moulded Anodized Aluminium frame & stain resistant porcelain coated 28 gauge steel backing with Virgin ABS (Acryloniprile Butadiene Styrene) Molded 300x100mmm Chalk tray and Eraser complete, including all accessories. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.
4
-
-
GREEN CHALK BOARD (SIZE : 2400mm(L) x 1200mm(HT)
Providing and fixing in position non magnetic green chalk board of Ceramic steel sheet matt finish in green colour including Anodized Aluminium frame Virgin ABS (Acryloniprile Butadiene Styrene) Moulded 300x100mm chalk tray & Eraser, Including all accessories complete. All the materials shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.
4
-
-
FROSTED FILM FOR CABIN GLASSES
Providing and fixing frosted Glass film partly opaque partly translucent on glass internal partitions and doors as per approved sample ,design ,drawing, specifications & direction of the Engineer with necessary glue, if required, labour,fixing in position etc.complete..All the materials shall be of approved make.
25
-
-
ROLLER BLINDS Providing & fixing in position roller blinds of approved make, color, shade of varying length, approved fabric with aluminum extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.
20
-
-
STAINLESS STEEL DUST BIN (300mm dia x 650mm ht )
Providing and placing in position 16 gauge pedal stainless steel dust bin of grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.
50
-
-
TEXTURE PAINT Providing and applying Texture paint of approved color and texture. Before applying texture paint, surface smoothness has to be checked properly and base should be well prepared and non absorbent. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
11
-
-
Providing and fixing vinyl plank flooring of approved make and approved colour with thickness not less than 4mm on the existing mosaic tiled flooring with adhesives, etc complete as per the specification and to the satisfaction of the Engineer – In – Charge.
220
-
-
Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
23.5
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : with 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10.5
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm : Jet Black
3
-
-
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.
321
-
-
Dismantling of flushing cisor,taps , urinals, wash basins & like of any inculding stacking of useful materials near the site and
30
-
-
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead a) Of area 3 sq.m. and below
14
-
-
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
37
-
-
Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
3.5
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.
First class Indian teak wood - Doors
0.25
-
-
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter
Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having
wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
Shutter Thickness : a) 32mm
Note: For 35 & 40mm thickness shutters, only frames of 5 x 2 ½ Cross section frames to be used. - Toilet
20
-
-
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
14
-
-
Providing and fixing bright finished brass handles with necessary screws etc complete
125 mm
14
-
-
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
40 x 3 mm flat iron hold fast, 15 cm long
22
-
-
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.
250 x 10 mm
8
-
-
Provided and fixing chromium plated brass 100- mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (Indian make of approved quality).
8
-
-
12mm cement plaster 1:4 (1 cement : 4 fine sand)
236.5
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
602.5
-
-
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
602.5
-
-
Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade.
602.5
-
-
Providing and fixing coloured ceramic tiles spartek or equivalent of 12 " x 12" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.
94
-
-
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
-
-
-
Dark Shades
20
-
-
Light Shades
20
-
-
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 600 x 600 mm light Shades
25
-
-
Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Glass Wool Insulation with FSK facing 50mm with 24 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
50
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1500
-
-
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
3
-
-
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.
3
-
-
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
3
-
-
Providing and fixing toilet paper holder :
C.P. brass
3
-
-
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :
15 mm nominal bore
3
-
-
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
110 mm dia
9
-
-
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
110 mm dia
9
-
-
Providing and fixing ball valve (brass) of approved quality :
High pressure with P.V.C. floats:
15 mm nominal bore
9
-
-
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws
750 x 20 mm size
3
-
-
Providing and fixing flush valve (nelson or mimilar) fully chrominium plated with stop cock wall flange flush pipe or elbow and vaccu.m breaker coupling etc. complete :
For Indian or european W.C.
3
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
110 mm dia
50
-
-
75 mm dia
50
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
-
-
-
110 mm dia
6
-
-
75 mm dia
6
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore
3
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
-
-
-
110 mm dia
3
-
-
75 mm dia
3
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 20mm nominal bore
3
-
-
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
3
-
-
Providing and fixing flush valve (nelson or mimilar) fully chrominium plated with stop cock wall flange flush pipe or elbow and vaccu.m breaker coupling etc. complete :
For Indian or european W.C.
3
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
3
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.
-
-
-
15 mm dia nominal outer dia pipes.
80
-
-
20 mm dia nominal outer dia pipes.
80
-
-
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe)
-
-
-
32 mm nominal outer dia pipes.
80
-
-
40 mm nominal outer dia pipes.
80
-
-
Providing and fixing R.P.V.C. vent cowl:
-
-
-
110 mm dia
3
-
-
75 mm dia
3
-
-
Providing and fixing non-return valve of approved quality :
25 mm nominal bore
3
-
-
Supplying and erecting split type room Air conditioningunit 2 TR 5 star capacity 250V, 50 cycles, A.C. Supplyhaving 1 No of air handling unit hi-wall mounting typecomplete withCONDENSOR at position as per specification no. APAC Refrigerants R410 A /R32 and COPPER
16
-
-
Supplying and erecting fully automatic line Voltage stabilizer, buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for,5 kVA maximum load and with voltmeter, selector switch, 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for Air Conditioner of 2.0 TR, and marking Sr. No. and date of erection
16
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.'(c) Group C -- with Cat A Modular Accessories
70
-
-
'Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
30
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required'.(a) Cat A
2
-
-
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required.'(a) 1 or 2 Module ( 75 mm x 75 mm) Cat A
2
-
-
'Installation,earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required.
2
-
-
'Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required
2
-
-
'Supply and erecting 'J' type Mild Steel fan hook fabricated out of 35 X 6 mm flat strip suitable for rafters complete with coach screws etc as required.'(c) For 8 inches rafter size
2
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. '(a) Cat A
125
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.'(a) Cat A
29
-
-
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator).
(a) 4 way single door Cat A
4
-
-
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)
'(d) 8 way (8+24), double door, Horizontal type Cat A
3
-
-
Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required
-
-
-
'(a) 40 A, Cat A
2
-
-
'(b) 63 A, Cat A
1
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
'(a) SP, Cat A
75
-
-
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
'(e) TPN, Cat A
2
-
-
'Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.
-
-
-
(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)
355
-
-
(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
850
-
-
(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
565
-
-
(i) 4 x 4 sq.mm + 2 x 4 sq.mm earthwire (25mm Conduit)
30
-
-
(j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit)
80
-
-
(k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit)
160
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
35
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
31
-
-
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required'(a) Cat 6
1330
-
-
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.'(a) 2 Pair
1178
-
-
'Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
'(a) 20 mm
665
-
-
(b) 25 mm
589
-
-
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 150 sq.mm
70
-
-
'Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
4 Core 4 sq.mm
70
-
-
4 Core 6 sq.mm
10
-
-
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3 1/2 x 150 Sq. mm.
2
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
(2) 4 x 4 Sq. mm.
2
-
-
(3) 4 x 6 Sq. mm.
2
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.'(b) In rocky strata
35
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.'(b) In rocky strata
35
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
45
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
35
-
-
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode
'(a) 3 metres length electrode
6
-
-
Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.
6
-
-
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
85
-
-
Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
20
-
-
Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. '(a) Cat A
2
-
-
Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.'(a) Cat A
3
-
-
Supply ,Installation , Testing and Commissioning of indoor feeder pillar of suitable to work 3 phase 4 wire 440 volts 50Hz system.Yhe panel should be flush front,compartamentalised,floor standing to allow cable entry from bottom , dust and vermin proof complete with interconnection busbar wiring etc.The cubical should be properly derusted and powder painted in oven process constucted of 14 SWG CRCA sheet and mounted on angle iron frame with following accessoreis.
Incomming Incommer 80A MCB ,4 pole ,make L&T/Siemens/Legrand/Schneider…....2Nos
100A Changeover switch 4pole L&T/Siemens/Legrand/Schneider…....1Nos RYB Indication Lamps ….....1 Nos
Outgoing 63-80A MCB , 4 pole , make L&T/Siemens/Legrand/Schneider…....4Nos SP MCB (6-32A) make L&T/Siemens/Legrand/Schneider…....8Nos
1
-
-
Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.
(b) 10 to 40 A
1
-
-
Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment
1
-
-
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.
(d) 50 Pair
50
-
-
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required.
(c) 50 Pair
2
-
-
Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete
90
-
-
Supply and Fixing of 12 floor Mounted Rack L3 Managed Switch 48 Port
48 10/100/1000 Base-T ports + 2 10G Base-T ports + 4 10G SFP+ ports, L3 Stackable Managed Switch
2
-
-
Supplying, erecting and commissioning of diesel generating set with alternator of 125 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG
1
-
-
Supplying & erecting on line UPS pure sine wave of 20 kVA (Three phase Input and three phase output) capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements