Info Tech Corporation Of Goa Limited Tender
View complete overview of Goa ITG Tender
Costs
EMD
₹ 19,28,801Document Cost
₹ 20,000Tender Fee
₹ 6,000
Summary
Construction Of Veterinary Dispensary Hospital Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ITG_19554_1Tender No
UGUEM HOSP BLOCK 1/2024 25/332/3421Tender Authority
Info Tech Corporation Of Goa Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earthwork in excavation over areas (exceeding 30cms in depth, 1.50m in width as well as 10sqmts on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc as directed by Engineer etc. all complete including refilling, dressing of sides ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer. For a depth from 1.50m upto a depth of 3.00m (Blasting Prohibited).
1740
-
-
... More
Earthwork in excavation in foundation, pipeline trenches, drain (not exceeding 1.5m in width or 10 sq.m. on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc. as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited).
450
-
-
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidatingeach layer ramming and watering lead upto 50m and all lifts and disposal of surplus earth as directed by Engineer in Charge.
307.5
-
-
... More
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. : Moorum
690
-
-
... More
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building) : Pre-construction
1100
-
-
... More
MASONRY & BRICK WORKS
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level including raking of joints, curing, necessary scaffolding etc., complete and as directed.
68
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
506
-
-
... More
Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)
494.5
-
-
... More
Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
337.75
-
-
... More
Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in superstructure upto floor five level. : 230 x 110 x 80 mm
12.25
-
-
... More
Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits : 50mm thick
43.5
-
-
... More
PLAIN CEMENT CONCRETE
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
-
-
-
... More
For all works upto plinth
220
-
-
... More
In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
40.75
-
-
... More
REINFORCED CEMENT CONCRETE:
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-charge. All works upto floor V level :
-
-
-
... More
M-25 grade of concrete
58
-
-
... More
M-30grade of concrete
1130
-
-
... More
Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folde plate and roofs having slope more than 15° upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 gradrd granitic or basaltic aggregate 20mm nominal size
88
-
-
... More
Providing and laying upto floor five level reinforced cement concrete (1:2:4) in kerbs, steps and the like excluding the cost of centering,shuttering and finishing and reinforcement (1 cement: 2 coarse sand: 4 graded grantic or basaltic aggreate 20mm nominal size
26
-
-
... More
Shuttering Works
Centering & shuttering including Strutting, Propping & removal of forms for :
-
-
-
... More
Foundations, Footings, Bases for columns
431
-
-
... More
Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
1164
-
-
... More
Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
821
-
-
... More
Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels, chajjas,sills, plinth beams not exceeding 1m in depth
1308
-
-
... More
Staircases (except spiral staircases) excluding landing
141.5
-
-
... More
Suspended floors, roofs landings, shelves & their supports
1820.5
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates :
-
-
-
... More
Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only
602
-
-
... More
Columns, Pillars, Posts & struts (circular or curved in plan)
63
-
-
... More
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, overa height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
446
-
-
... More
STEEL WORKS:
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
124345
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square HollowSection (SHS) IS4923 /Rectangular Hollow Section(RHS) IS4923/ Circular Hollow Section (CHS)IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min YeildStress 310 Mpa)) trusses etc., including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Protective coating & surface treatment shall be as specified and as shown on drawings and/or as directed by the Engineer In Charge.
5637.5
-
-
... More
PLASTERING WORKS
6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)
2280
-
-
... More
12mm cement plaster 1:4 (1 cement : 4 fine sand)
3436
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
574.5
-
-
... More
Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36mm to 12.5mm nominal size dashed over and including fresh plaster in two layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1: 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. : Natural cement finishing using ordinary cement
258
-
-
... More
Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
167
-
-
... More
FLOORING, SKIRTING AND DADOING WORKS
Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00
123
-
-
... More
Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete : Jet black
34
-
-
... More
Providing and laying 25 mm shahabad stone flooring over 25 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) laid over with grey cement slurry mixed with pigment, including. Rubbing and polishing complete.
357
-
-
... More
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete : 900x 900 mm Dark Shades / 900 x 900 mm - light Shades
1618.5
-
-
... More
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. : 900x 900 mm Dark Shades / 900 x 900 mm - light Shades
564
-
-
... More
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. : Dark & Light Shades
136
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 450
203
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm (Basic Rate Rs180/-Sqft : Jet Black
66
-
-
... More
PAINTING WORKS
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2429
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2429
-
-
... More
Pebble dash plaster with a mixture of washed pebble or crushed stone 6mm to 12.5mm plaster in two layer, under layer 12mm cement plaster 1: 4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 10% finely ground hydrated lime by volume of cement.
1219
-
-
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
1219
-
-
... More
OTHER ITEMS - MISCELLANEOUS
Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. (As Directed by Engineer in Charge).
Note:Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
79
-
-
... More
Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen.
-
-
-
... More
Providing & fixing in position hand rails in staircase, landing and the like with 2" dia G.I. pipe (light class) resting on 25 mm (1") size M.S. square bars of clear height 90cms placed at 30 cm c/c including making necessary hold fast fixture (25 mm square bars 22 cm long) embeded in staircase concrete for resting the M.S. vertical square bars with holding etc. as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete (measurement will be made along the running length of hand rail).
87
-
-
... More
Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading.
4
-
-
... More
Supply and fixing 12mm(6T+1+5T) laminated glass over Ms box sections(finished with enamel paint) as specified by the architect - Skylight. Cost of MS box section shall be calculated in the steel works. The glass shall be fitted with 3m double sided tape. The cost should include placing at all levels including the necessary scafolding required for the same. The gap between the glass shall be filled with weatherproof sealant as specificed. The measurement of the glass shall be taken as per actuals at site. Wastage percentage should be part of the quote. Basic cost of laminated glass shall be Rs 3500/- per sq.m
10
-
-
... More
Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
550
-
-
... More
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
100
-
-
... More
Supplying and placing over slab shuttering in straight alignment Non-load bearing Light weight Wienberger Porotherm Blocks of 400 x200x200mm or any other approved equivalent placed as infill in slab/beams in roof. The blocks to be cut to wedge shaped and placed in position with cement mortar/Adhesive packing for each blocks. Cost to include lifting to all level. (Wastage due to breakage to be accounted in the rates). Basic Rate: 60Rs\No. Utmost care to be taken for alignment of Steel reinforcement and the bock to be maintained in place using stoppers.Shuttering quantity shall be calculated as standard and will not be measured as a part of this item. The measurements shall be as per the actual block at location. Any cut block shall be measured in full. Basic Cost of the block Rs54/-
3900
-
-
... More
WATER PROOFING WORKS
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate included for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
782
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.
1100
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.
231.5
-
-
... More
DOOR- WINDOWS & JOINERY WORKS
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. : Second class indian teak wood
1.5
-
-
... More
Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.
46.5
-
-
... More
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions : Plain plate glass with powder coating with pure polyester powder of shade of required colour on the aluminium section
87.5
-
-
... More
Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters. : (b) 35mm thick including anodized aluminium butt hinges with necessary screws:
71
-
-
... More
Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete
148
-
-
... More
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters. : Plain plate glass with powder coating with pure polyester powder of shade of required colour on the aluminium section
53.5
-
-
... More
Providing and fixing of aluminium door with three tracks and three shutters sliding door with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.
40
-
-
... More
Melamine polishing on wood work (one or more coat) : Glossy
31
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)
7
-
-
... More
Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with screws : Second class Indian teak wood
9
-
-
... More
Painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade.
45
-
-
... More
Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick.
38
-
-
... More
The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer,labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
-
-
-
... More
Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
26
-
-
... More
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows. : Plain glass
6
-
-
... More
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. (b) 40 x 3 mm flat iron hold fast, 15 cm long
174
-
-
... More
Providing and fixing chromium plated brass handle with necessary screws etc. complete : 125 mm
59
-
-
... More
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. 250 x 10 mm
29
-
-
... More
Providing and fixing bright finished brass door Aldrop with necessary screws etc complete : 250 x 12 x 5 mm
29
-
-
... More
Providing and fixing bright finished brass door latch with necessary screws etc complete : 250 x 16 x 5 mm
29
-
-
... More
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
29
-
-
... More
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
48
-
-
... More
WATER SUPPLY AND SEWERAGE WORKS
SANITARY FIXTURES & FITTINGS
Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required : W.C. pan with white plastic seat and lid.
10
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
100
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 : 15mm nominal bore
100
-
-
... More
Providing and fixing toilet paper holder : C.P. brass
10
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
5
-
-
... More
Providing and fixing polished black granite urinal partition of approved shade, thickness and of size 1050 mm x 600 mm wide, with U shaped MS clamps at fixed end with cement concrete 1:2:4 (1 cement: 2 Coarse sand :4 Graded Stone aggregates of 6 mm nominal size) and finished smooth inclusive of round moulding of the exposed edges. : Jet Black polished Granite
3
-
-
... More
Supply and fixing of under counter type of approved make wash basin, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including with approved mirror polish granite top in single piece & for sides in single piece over average 40 mm thick cuddappa supporting top slab, 25 mm nosing and rounding of granite top and sides, inclusive of sandwitched partitions of 25 mm thick cuddappa slabs using cement slurry or equivalent, cut out of required sizes to receive fittings an pipes , chasing in walls and making grooves etc complete ( Rate quoted per unit of wash basin comple in all respects)
12
-
-
... More
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws
12
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Angle Cock with extended lever handle and wall flange with 15mm nominal bore
13
-
-
... More
Providing & fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws : 750 x 20 mm size
12
-
-
... More
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
10
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
13
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock with extended lever handle and wall flange Confirming to IS 8931; 1993 15mm nominal bore
1
-
-
... More
Supplying, installing, testing and commissioning approved make Shower with brass chromium plated with hot and cold single lever mixer unit with CP spout. 8 lpm, lever holder, Overhead shower with rose‐Rabbit cleaning system etc. complete, testing and commissioning the installation.
1
-
-
... More
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
1
-
-
... More
WATER SUPPLY SYSTEM
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of the Engineer in charge.(External work (heavy duty SDR 11 pipe)
-
-
-
... More
15 mm nominal outer dia pipes
22
-
-
... More
20 mm nominal outer dia pipes.
116
-
-
... More
25 mm nominal outer dia pipes.
70
-
-
... More
32 mm nominal outer dia pipes.
63
-
-
... More
40 mm nominal outer dia pipes.
67
-
-
... More
50 mm nominal outer dia pipes.
106
-
-
... More
Providing and fixing ASTM UPVC pipe,conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. : External work : SCH-40(blue)/(white)
-
-
-
... More
63 mm outer dia.
45
-
-
... More
50 mm outer dia.
40
-
-
... More
40 mm outer dia.
12
-
-
... More
Providing and fixing ball valve (brass) of approved quality : Low pressure with copper. floats :
-
-
-
... More
20 mm nominal bore
5
-
-
... More
25mm nominal bore
2
-
-
... More
Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
1
-
-
... More
Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
1
-
-
... More
Providing and fixing of brass body nickel plated automatic air release valves with brass splindle, NBR (nitrile butadiene Rubber) and join franite elastomer,stainless steel spring polypropylenic float at the top most points of watersupply distribution risers in the shafts having pressure of 10kg/cm2.
a. 20 mm nominal bore
1
-
-
... More
Supplying approved make CI water metre with bulk enclosed type with mettallic gears flanged ends able to record the flow under pressure with flow indications complete
1
-
-
... More
SOIL, WASTE AND VENT PIPE SYSTEM
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
... More
110 mm dia
105
-
-
... More
75 mm dia
75
-
-
... More
50 mm dia
57
-
-
... More
160 mm dia
17
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
-
-
-
... More
110 mm dia
9
-
-
... More
75 mm dia
9
-
-
... More
50 mm dia
8
-
-
... More
160 mm dia
1
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating
-
-
-
... More
110 mm dia
8
-
-
... More
75 mm dia
7
-
-
... More
50 mm dia
7
-
-
... More
160 mm dia
2
-
-
... More
Multi Connection floor trap, provideing and fixing of 150x151 mm Square S.S. Grating with anti-cocroach trap assemby for floor trap
20
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. (a) Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
2
-
-
... More
Providing and fixing square mouth SW gully trap 100mm dia grade ' A' complete with C.I grating burnt brick masonry with CM (1:4) and plastering with water tight heavy duty double seal C.I cover, frame of 45x45 cm size The Wt, of cover to be not. less than 4.52 kg of frame to be not less than 2.75 Kg. : GULLY TRAP 300 X 300 mm
3
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a. Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
5
-
-
... More
Extra for depth for manholes : a) size 90 x 80 cm
3
-
-
... More
RAIN WATER PIPES AND FITTINGS
Supplying and fixing of Leaf trap with khurra made out of UPVC with flange and grating for rainwater outlets on terrace including all necessary grounting with sealants to make it absolutely water proof : 160MM dia
2
-
-
... More
Construction of Rainwater Chamber with best quality, approved table moulded bricks in CM 1:6, walls plastered smooth inside in CM 1:3 and outside with CM 1:3 with sponge finish benching and channeling in PCC 1:2:4. Supplying and fixing encapsulated PVC steps as per drawing for maintenance.& SFRC Cement Concrete Medium duty cover & frame Complete : Rain water chamber 600x600x600mm
2
-
-
... More
Construction of Chamber with best quality, approved table moulded bricks in CM 1:6, 500mm dia @ top and 1200mm dia @ bottom over a bed of 250mm thick PCC 1:4:8, walls plastered smooth inside in CM 1:3 and outside with CM 1:3 with sponge finish benching and channeling in PCC 1:2:4. Supplying and fixing encapsulated PVC steps as per drawing for maintenance.& SFRC Cement Concrete Medium duty cover & frame Complete : Valve chamber 750 X 600 mm
1
-
-
... More
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump and over head tanks. The puddle flanges shall be threaded end up to 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings
-
-
-
... More
65mm dia GI puddle flange
1
-
-
... More
25mm dia GI puddle flange
1
-
-
... More
Supplying, installing and commissioning approved make digital water level indicators including wall MS mounting stands, necessary fixing materials etc., complete. The quoted rate shall exclude the necessary AC and DC wiring
(stands to be painted with enamel paint).
1
-
-
... More
PUMPS AND ACCESSORIES
FILTER FEED TRANSFER PUMPS
Supplying, installing, testing and commissioning of MONOBLOCK type pumps (one working & one standby) for pumping water from Raw water sump to water treatment plant.The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Discharge ‐ 90 LPM, Head-Head ‐25Mtr The pump shall be suitable for the following requirements:
a) Suitable control panel indoor wall mounting type .
b) "Industrial type electronic liquid level controllers with stainless steel probes /
sensors or float switch for automatic operation."
c) 1no. pressure gauge 4" dial with valve tee and fittings.
d) 2 nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confirming to BS 5155 / MF6 standards and including a set of GI flanges as per BS‐10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the suction & delivery side 1 no.s of Y strainers with stainless steel body of approved make, provide each strainer with a cock for blowing down. Screen area of strainer shall be minimum of 5 times more than the pipe area with 1/32 inch max size holes with pressure 10kg/cm2. The cost also includes necessary flanges for supply and fixing to the pipes on the suction side.
1
-
-
... More
e) 1 nos. slim seal flap type check valve with CI body and cast steel disc pressure rating PN‐10 Kg / sq.cm including a set of GI flanges as per BS‐10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc.,(inter valve / audco make) on the delivery side.
f) Alarm indication with signal in the event of pump failure etc.
g) GI manifold made out of GI 'C' Class pipe with Collars, Tee and Flange provision for connection of the above items. GI manifold shall be finished with hot dip galvanising to 100 microns.
h) The pump shall be suitable for handling silt and muck in the water.
-
-
-
... More
DOMESTIC WATER PUMPS (HYDROPNEUMATIC SYSTEM ‐ DOMESTIC USE)
FITTED WITH VFD
Supplying, installaing, testing and commissioning of vertical type monobloc domestic water Hydropneumatic pumps fitted with multi VFD for pumping the water from domestic underground sump to distribution line through hydropneumatic pressure vessel, for domestic purposes.The pump shall be coupled to the adequate H.P. electrical motor of EFF‐1, mounted on a common base frame with mani fold, with an efficiency greater than 80% . The pumps shall be provided with modbus output
1 No. of pressure transmitter The pump shall be suitable for the following requirements:
a) Micro processor based Built ‐ in electrical control panel with motor starter relays, single phase preventor, dry run protection, indicating lamps, ON ‐ OFF push buttons, alarm indication with signal in the event of pump failure, etc., and shall be suitable for 415 +/‐ 10% volts & 50Hz electric supply.
i) Flow rate of each pump ‐ 1.5 LPS (2w+1s)
ii) Pump design head ‐ 45 m
iii) Flow rate of each pump ‐ 0.5 LPS cum (1w) ‐ jockey pump
iv) Pump design head ‐ 45 m
1
-
-
... More
b) Design, supply, erection, testing and commissioning of appropriate capacity with pressure vessel of suitable rating, MS pressure tank with pre‐charged diaphram, self supported, with necessary manhole, flange for inlet / outlet provisions, duly fitted with safety valve / pressure relief valve, magnetic level switches 1 nos, vent valve, with one set of gasket, junction box and wiring, complete with electrics etc., as required: Notes: The Control Panel shall be designed and fabricated in such a way that it shall be compatible to BMS. Necessary cabling from the pump to panel and making a PCC foundation for the pumps to be considered along with the pumps It should also include
a) 8 nos. cast iron butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges as per BS‐10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc.,
b) 4 nos. check valve with CI body and cast steel disc pressure rating PN‐10 Kg / sq.cm including a set of GI flanges as per BS‐10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc.,
c) 4 nos. Y‐strainer with CI body and cast steel disc pressure rating PN‐10 Kg / sq.cm including a set of GI flanges as per BS‐10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc.,
-
-
-
... More
Landscape pump (PUMP ROOM To External landscape)
Supply, testing commisioning of Submersible pumps (1W+1S) with Isolation valves, NRV,Y Strainer, Pressure Gauge, Level switch, Control panel and control cables from panel to pump to be included in the cost. Control panel shall be placed to the nearest column to the sump. for 1.0 LPS @ 25m head in the PUMP ROOM
1
-
-
... More
ELECTRICAL WORKS
ELECTRICAL LV WORKS INTERNAL
WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (c) Group C -- with Cat A Modular Accessories
108
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories
5
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
234
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. '(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
1461
-
-
... More
'Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
2803
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. '(d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit)
181
-
-
... More
SWITCHES, SOCKETS AND SWITCH BOX
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A
42
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A
79
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (c) 15/16 A switch Cat A
6
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (e) 6 pin 15/16 A socket outlet Cat A
6
-
-
... More
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (a) Cat A
93
-
-
... More
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. (a) Cat A
44
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (a) Cat A
15
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module Cat A
37
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A
28
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (b) 4 Module ( 125 mm x 7 mm) Cat A
5
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required (a) Cat A
42
-
-
... More
DB, MCB
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required"(a) Cat A
2
-
-
... More
Supplying and fixing 20 A 415 V TPN industrial type socket outlet with4 pole and earth metal enclosed plug top alon with 20 A, C series TP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A
1
-
-
... More
Supplying and fixing 30 A 415 V TPN industrial type socket outlet with4 pole and earth metal enclosed plug top alon with 20 A, C series TP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A
1
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required) (b) 8 way (8+24), double door, Vertical type, Cat A
1
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required) (a) 4 way (8+12), double door, Vertical type, Cat A
1
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (g) 12 way double door Cat A
1
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (h) 16 way double door Cat A
1
-
-
... More
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
4
-
-
... More
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (c) DP, Cat A
1
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A
53
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(b) SPN, Cat A
12
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
8
-
-
... More
Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.
4
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.
1
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.
1
-
-
... More
(8 WAY TPN 7 Segment Timer DB) Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. 63A 4P MCB 10 KA with connected accessories – 1 No. 63A 4P RCCB 100mA - 1 No.
Timer : 1 No. AlphaRex3 D22, 2 channels, (Legrand: 412641) with 6A SP MCB, Contactor : 6 Nos. CX3 CT 230V 2NO 25A HANDLE (Legrand : 412544) - 2Nos. Per phase. With Auto / Manual selection. ( INCOMING) 10/16A SP+N MCB, 10 KA – 24 Nos (OUTGOINGS) With necessary tinned copper bus bars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
8 WAY 7 SEGMENT TPN MCB DB
Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 8way MCB DB comprising of the following : 63A TPN MCB 10 KA with connected accessories – 1 No., 63A DP RCCB 100mA - 3 Nos. (INCOMING) 10/16A SP+N MCB 10KA - 24 EA. (OUTGOINGS) With necessary tinned copper bus bars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc., with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
6 Way TPN 7 segment DB Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 6way MCB DB comprising of the following : 63 A 4P MCB 16KA – 1No. as incomer. 40A DP RCCB 100mA – 3 EA. as outgoings. each 40A DP RCCB outgoing consist of 6 each 6/10/16A 10 KA SP MCB (C-Curve) in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate. With necessary tinned copper bus bars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
4
-
-
... More
SUPPLY OF LT CABLES & END-TERMINATION
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 16 sq.mm
55
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 3 x 16 Sq. mm.
2
-
-
... More
'Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 185 sq.mm
11
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (13) 3 x 185 Sq. mm.
1
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 25 sq.mm
1935
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 1/2 x 25 Sq. mm.
38
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 35 sq.mm
295
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3 1/2 x 35 Sq. mm.
6
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 150 sq.mm
53
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (7) 3 1/2 x 150 Sq. mm.
4
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 31/2 Core 185 sq.mm
23
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (8) 3 1/2 x 185 Sq. mm.
2
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm
20
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.
2
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm
384
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.
8
-
-
... More
Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 2 Core 10 sq.mm
10
-
-
... More
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE Copper conductor cable of 1.1 KV grade, complete as required. (4) 2 x 10 Sq. mm.
8
-
-
... More
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm
2434
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm
195
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE Copper conductor cable of 1.1 KV grade, complete as required. (1) 3 x 2.5 Sq. mm.
27
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm
67
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE Copper conductor cable of 1.1 KV grade, complete as required. '(2) 3 x 4 Sq. mm.
8
-
-
... More
LAYING OF LT CABLES
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In all types of Strata
1962
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
490
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
2453
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In all types of Strata
88
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
206
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In all Types of Strata
34
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
17
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required
34
-
-
... More
Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.
42
-
-
... More
SUPPLY OF HV CABLES AND END-TERMINATIONS
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. (4) 3 Core 95 sq.mm
5
-
-
... More
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (b) 11 KV, 3 Core x 50 - 95 sq.mm
1
-
-
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (b) 11 KV, 3 Core x 50 - 95 sq.mm
1
-
-
... More
'Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. (8) 3 Core 240 sq.mm
22
-
-
... More
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (d) 11 KV, 3 Core x 240 - 300sq.mm
4
-
-
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (d) 11 KV, 3 Core x 240 - 300sq.mm
1
-
-
... More
LAYING OF HV CABLES
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In all Types of Strata
5
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In all Types of Strata
22
-
-
... More
Supply of cable route marker 20 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required. For HT cable.
6
-
-
... More
PERFORATED TYPE CABLE TRAYS
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth
26
-
-
... More
'Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth
22
-
-
... More
'Supplying and Installing following size perforated type 14 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth
38
-
-
... More
'Supplying and Installing following size perforated type 14 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth
52
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth (14 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. '300mm width x 50mm depth (16 SWG)
2
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. '600mm width x 50mm depth (14 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray cross Members of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray cross Members of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray cross Members of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
1
-
-
... More
'Supplying and Installing following size perforated type , M.S.cable tray cross Members of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth (14 SWG)
1
-
-
... More
LADDER TYPE CABLE TRAYS
Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
64
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
17
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
29
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
11
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray bend of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray bend of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray bend of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. '600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray bend of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray reducer of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray reducer of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray reducer of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray reducer of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray tee of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray tee of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray tee of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray tee of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
'Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)
1
-
-
... More
Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. '600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.'1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)
1
-
-
... More
FLOOR RACEWAYS
Floor Raceways - Hot Dip Galvanised:Supply and installing 100 mm wide x 40 mm deep raceway size of Pre Galvanized floor raceways made out of 1.6 mm thick GI sheet steel with 2mm cover, with internal compartments complete with jointing sleeves, tees, bends, cross members, Reducers and other accessories under floor installation including cutting and chasing the floor, making good the same, placing in position and cleaning from inside complete of following sizes etc. as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
5
-
-
... More
Floor Raceways - Hot Dip Galvanised: Supply and installing 150 mm wide x 40 mm deep raceway size of Pre Galvanized floor raceways made out of 1.6 mm thick GI sheet steel with 2mm cover, with internal compartments complete with jointing sleeves, tees, bends, cross members, Reducers and other accessories under floor/Ceiling installation including cutting and chasing the floor, making good the same, placing in position and cleaning from inside complete of following sizes etc. as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
5
-
-
... More
Floor Raceways - Hot Dip Galvanised: Supply and installing 300 mm wide x 40 mm deep raceway size of Pre Galvanized floor raceways made out of 1.6 mm thick GI sheet steel with 2mm cover, with internal compartments complete with jointing sleeves, tees, bends, cross members, Reducers and other accessories under floor/Ceiling installation including cutting and chasing the floor, making good the same, placing in position and cleaning from inside complete of following sizes etc. as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
20
-
-
... More
Providing and fixing 150 x 150 x 65 mm deep Pre-Galvanized raceways junction box made out of 1.6 mm thick sheet steel with 3 mm thick Stainless steel cover including top surface buffing and fixing arrangment with stainless steel screws etc complete as required with necessary civil work such as floorchipping, jamming of junction box and repair of floor with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
2
-
-
... More
Providing and fixing 300 x 300 x 65 mm deep Pre-Galvanized raceways junction box made out of 1.6 mm thick sheet steel with 3 mm thick Stainless steel cover including top surface buffing and fixing arrangment with stainless steel screws etc complete as required with necessary civil work such as floorchipping, jamming of junction box and repair of floor, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Providing and fixing 400 x 400 x 65 mm deep Pre-Galvanized raceways junction box made out of 1.6 mm thick sheet steel with 3 mm thick Stainless steel cover including top surface buffing and fixing arrangment with stainless steel screws etc complete as required with necessary civil work such as floorchipping, jamming of junction box and repair of floor, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
5
-
-
... More
FIXTURE AND LUMINAIRES
Supply,installation,testing and commissioning of recessed/surface mounted type 9W LED Downlight with electronic driver & accessories as required of Wipro Cat Ref No-LD06-111-XXX-57-SM (9W) or equivalent.(Downlight) as per the standrad technical specification and as per the directions of engineer incharge of work. CCT: 4000K
The optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver . with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
32
-
-
... More
Supply,installation,testing and commissioning of 3W LED recess mounted LED down lumianire (Circular type) with Aluminium housing Swivel spot light with 30degree beam angle suitable for operation on 220-240 volt 50 cycle per second with constant current integrated driver with THD less than 8% & low copper losses and Surge Protection 2kV and power factor more than 0.9 and system lumen not less than 900 with CRI70.Lamp colour to be Cool day white.LED burning hours: 50,000 hours, Fixture & Driver. Color Temperature 4000K. warrnty: 2 Years. SIMILAR TO Jaquar Model & Make : ESTUS - LETS02R003XW
7
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories 12W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO WIPRO-LD90-141-XXX-40-XX*, 4000K., as per the directions of engineer incharge of work. The optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver . with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
7
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories 15W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO WIPRO-LD90-191-XXX-40-XX*, 4000K., as per the directions of engineer incharge of work. The optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver . with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
38
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories 18W LED SURFACE/RECESS MOUNTED DOWNLIGHTER WITH 1200LM, 6500K, SIMILAR TO WIPRO-LD90-231-XXX-40-XX*, 4000K., as per the directions of engineer incharge of work. The optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver . with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
40
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories 24W LED RECESS/SURFACE MOUNTED COB DOWNLIGHTER WITH 1800LM, 4000K, SIMILAR TO WIPRO Swivell Projector-LD59-251-036-40-XX*, 4000K. as per the directions of engineer incharge of work.
The optic shall be diffuser. The system efficacy shall not be less than 100lm/W. Luminaries thickness shall not be greater than 35mm, surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5. The burning hours of the LED luminaries shall be 30,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
26
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories 13.5 W LED Endura LED Bulkhead light fixture withTHD less than 8% & low copper losses and Surge Protection 2kV.Lamp colour to be Cool day white.LED burning hours: 50,000 hours, Fixture & Driver and Color Temperature 5700K warrnty: 2Years., SIMILAR TO Havels CAT. No. LHEXCFP7IN5W013
LED industrial IP66 luminaire with housing made of extruded aluminium. .The luminaire shall be with dedicated optics of polycarbonate to provide precise light distribution of wide beam angle. 'The system lumens shall not be less than 600 lumens with 6500K 'CCT. The CRI shall be 80. The luminaire is designed to meet IP 66 classification and is compliant 'with relevant safety and performance and EMI standards. The luminaire shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C. A specially designed heat management system to ensure luminous efficacy =60 lm/ W for the system and ensure lumen depreciation upto 30% over 50k burning hours. The luminaire shall be able operate from 140 - 270V AC, 50Hz with 0.95 PF & THD =10%. The luminaire 'shall have an in-built surge protection upto 3kV.
5
-
-
... More
Supply, loading, Unloading, Storing, Installation, testing & commissioning of 8W LED Spike Light Fixture with Die cast aluminium Housing, Transperant, tempered glassdiffuser IP54 complete accessories with Weather proof Junction Box & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work. CCT:3000K, Similar to Jaquar model: LSPK04R108XW
2
-
-
... More
Supply Unloading, Storing, Installation, Testing & Commissioning of 25/28W 4ft LED Linear Suspended / Recessed mouted type lumianire suitable for operation on 140-270 volt 50 cycle per second with integrated driver with THD less than 10%, power factor 0.95 and Color Temperature 5700K SIMILAR TO Havels Model & Make : DESTELLO50LP/S25WLED857SPMMAWH For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
40
-
-
... More
Supply Unloading, Storing, Installation, Testing & Commissioning of 120W Suspended Chandlier Light Fixture made of Brass chrome finishing in Spectra Crystals SIMILAR TO Jaquar Make, Model Galaxy 11025, the complete luminaries with all fixing accessories & should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, fixing, testing and commissioning of the following lighting luminaries with all other necessary accessories. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver . Supply, Installation, Testing & Commissioning of Philips RECESS/SURFACE mounted 4 ft 1x22 W(2200 lumens) LED BATTEN type fixture for continous application suitable for operation on 230 volt 50 cycle per second Single Phase AC supply with THD less than 10% with 1.5sqmm PVC insulated FR copper conductor single core cable and earthing etc, as required. LED industrial IP20 luminaries with housing made of extruded aluminium. The luminaries shall be with dedicated optics of polycarbonate to provide precise light distribution of wide beam angle. 'The system lumens shall not be less than 2200 lumens with 6500K 'CCT. The CRI shall be 80. The luminaries is designed to meet IP 20 classification and is compliant 'with relevant safety and performance and EMI standards. The luminaries shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C. A specially designed heat management system to ensure luminous efficacy =100 lm/ W for the system and ensure lumen depreciation up to 30% over 50k burning hours. The luminaries shall be able to operate from 140 - 270V AC, 50Hz with 0.95 PF & THD =10%. The luminaries 'shall have an in-built surge protection up to 3kV. SIMILAR TO Model & Make : LUMILINEPLUSBS22WLED865SPCSS Havells. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
25
-
-
... More
Supply, Installation, Testing & Commissioning of 5W/Mtr LED Flexi Strip Light with Driver placed inside aluminium extrusion covering with acrylic sheet. LED burning hours: 50,000 hours, Fixture & Driver and Color Temperature 3000K warrnty: SIMILAR TO Wipro CAT. No. LS06-005-120-40-50+LG40-024 (Driver) For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
15
-
-
... More
Supply, Installation, Testing & Commissioning of 5W/Mtr LED Flexi Strip Light with Driver. LED burning hours: 50,000 hours, Fixture & Driver and Color Temperature 3000K SIMILAR TO Wipro CAT. No. LS06-005-120-40-50+LG40-024 (Driver) For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
51
-
-
... More
Supply Unloading, Storing, Installation, Testing & Commissioning of 80W LED High Bay light with electronic deriver & accessories as required of Wipro Cat Ref No- LH21-122-060-57-XX UNO HIGHBAY LIGHT or equivalent make. (High Bay light) as per the directions of engineer incharge of work.
LED industrial IP65 luminaire with housing made of extruded aluminium. .The luminaire shall be with dedicated optics of polycarbonate to provide precise light distribution of wide beam angle. 'The system lumens shall not be less than 600 lumens with 4000K 'CCT. The CRI shall be 80. The luminaire is designed to meet IP 65 classification and is compliant 'with relevant safety and performance and EMI standards. The luminaire shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C. A specially designed heat management system to ensure luminous efficacy =100 lm/ W for the system and ensure lumen depreciation upto 30% over 50k burning hours. The luminaire shall be able operate from 140 - 270V AC, 50Hz with 0.95 PF & THD =10%. The luminaire 'shall have an in-built surge protection upto 3kV. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
18
-
-
... More
Supply Unloading, Storing, Installation, Testing & Commissioning of 1 Mtr Track with 3 EA. 35Watts Floret Light complete with assembling, Supports from the Ceiling & all necessary accesories etc. SIMILAR TO Model & Make : LD57-251-036-40-XX + XTS-5100- Wipro Colour - White/Black as per the directions of engineer incharge of work. Surface/wall mounted LED batten with system with 4000K CCT the optic shall be diffuser. The system efficacy shall not be less than 100lm/W. The luminaries shall be mounted using spring clip. surge protection of 2.5kV and operating voltage of 140 - 270V. SDCM5, THD20%. The burning hours of the LED luminaries shall be 25,000 hours @L70. The CRI of the luminaries shall be 80. For LED light fittings, the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
8
-
-
... More
Supply, loading, Unloading, Storing, Installation, testing & commissioning of 8W LED Bollard diffused light fixture (IP 65) with complete accessories with Weather proof Junction Box & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work. CCT: 3000K. Make : Havells Model: BAMBOOBL8WLED857SSYMTOPCM (1.0M)
21
-
-
... More
Supply, loading, Unloading, Storing, Installation, testing & commissioning of 6W LED Under Water Light fixture (IP 68)made of Hard chrome plated stainless steel with silicon sealed glass with complete accessories with Weather proof Junction Box & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.. CCT: 3000K. Make : Wipro Model Arcus: LU03-950-030-30-XX
15
-
-
... More
Supply and installation of 1x45W LED Post top light fixture with housing made up of die cast aluminium body unique design with weather proof (IP 65) gasket and heat resistant toughened cleat glass, asymmetric lens. High power COB LED Chip with suitable control gear/driver and all accessories as per dwg suitable to mount on mentioned 5M pole & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work. Similar to Havels Model: VICTORIAPT35WLED757PSYMTOTG
5
-
-
... More
Supply and installation of 1x45W LED Gate light fixture with housing made up of die cast aluminium body unique design with weather proof (IP 65) gasket and heat resistant toughened cleat glass, asymmetric lens. High power COB LED Chip with suitable control gear/driver and all accessories as per dwg suitable to mount on gate & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work. Similar to Havels Model: VICTORIAPT35WLED757PSYMTOTG
2
-
-
... More
Supply and installation of 1x50W LED Driveway (Street light) fixture with housing made up of die cast aluminium body unique design with weather proof (IP 65) gasket and heat resistant toughened cleat glass, asymmetric lens. High power COB LED Chip with suitable control gear/driver and all accessories as per dwg suitable to mount on mentioned 5M pole & the complete luminaries should have a warranty for 2 years which includes the housing + LED + Driver, with all lead and Lifts and as directed by the Engineer-In-Charge of the work. Similar To Wipro Model : LR02-671-xxx-57-G2
10
-
-
... More
Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories. (a) Cat A
15
-
-
... More
Supplying and fixing extra down rod of 10 cm length GI pipe 15 cm dia heavy gauge including painting etc as required
15
-
-
... More
Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required
7
-
-
... More
Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
5
-
-
... More
INSTALLATION OF LIGHT FIXTURES
Installation, Testing & Commissioning of 4ft surface/recess mounted LED BATTEN Light Fixtures with all fixing Accessories.
10
-
-
... More
Installation, testing & Commissioning of recess/Surface mounted type Circular LED Down Light Fixtures with all fixing Accessories. (5 - 24Watts)
150
-
-
... More
Installation, testing & Commissioning of recess/surface mounted type 2'x2' LED Down Light Fixtures with all fixing Accessories.
3
-
-
... More
Installation, testing & Commissioning of suspended type Linear LED Down Light Fixtures with all fixing Accessories.
15
-
-
... More
Installation, testing & Commissioning of Surface/suspended type pendant type LED Down Light Fixtures with all fixing Accessories. 0-36W
1
-
-
... More
Installation, testing & Commissioning of Surface/suspended type pendant type LED Down Light Fixtures with all fixing Accessories. above 36W- 100W
1
-
-
... More
Installation, testing & Commissioning of Surface/suspended type Chandlier LED Light Fixtures with all fixing Accessories. Above upto 100W
2
-
-
... More
Installation, testing & Commissioning of wall mounted decorative type LED Light Fixtures with all fixing Accessories.
1
-
-
... More
Installation, testing & Commissioning of wall mounted type bulk head LED Light Fixtures with all fixing Accessories. (Allow 13/28W)
10
-
-
... More
Installation, testing & Commissioning of Recess/Surface mounted type 1Mtr track LED Light Fixtures with all fixing Accessories.
4
-
-
... More
Installation, testing & Commissioning of Wall mounted type Mirror LED Light Fixtures with all fixing Accessories.
3
-
-
... More
Installation, testing & Commissioning of Surface/Recess mounted type High/Mid Bay LED Light Fixtures with all fixing Accessories. Allow 100Watts
22
-
-
... More
Installation, testing & Commissioning of Surface/Recess mounted type 5Mtr Strip LED Light Fixtures with all fixing Accessories.
36
-
-
... More
Installation, testing & Commissioning of Surface/Recess mounted type Rectangular Zoom Type LED Light Fixtures with all fixing Accessories.
3
-
-
... More
Installation, testing & Commissioning of Floor mounted type LED Bollard Light Fixtures with all fixing Accessories.
17
-
-
... More
Installation, testing & Commissioning of LED Spike Light Fixtures with all fixing Accessories.
20
-
-
... More
Installation, testing & Commissioning of LED Under Water Light Fixtures with all fixing Accessories.
15
-
-
... More
Installation, testing & Commissioning of LED Surface/Recess mounted Step Light Fixtures with all fixing Accessories.
15
-
-
... More
Installation, testing & Commissioning of LED Surface mounted Gate Light Fixtures with all fixing Accessories.
2
-
-
... More
Installation, testing & Commissioning of LED Floor Flush mounted Burried Light Fixtures with all fixing Accessories.
3
-
-
... More
Installation, testing & Commissioning of LED Street Light Fixtures Excluding Poles and Accesories.
10
-
-
... More
Installation, testing & Commissioning of LED Post top Light Fixtures Excluding Poles and Accesories.
5
-
-
... More
Single Arm street Light Pole: Supply, erection and commissioning of 5M Height GI street light pole. The pole has a reducing diameter starting with 140mm at bottom to 80 mm at th top of pole, arm length of 500 mm on the top end of pole at 90 deg angle from pole to fix the light fixture, Arm diameter to be 80 mm. 140mm conical section at the bottom with baseplate of 300mmx300mmx12 mm thick to weld the pole, J bolts, including cutting, threading, welding,loop in-loop out 6 way connector(connectwell) for cable connection, 10A SP MCB, interconnecting cable, supply of PVC pipe,40mm dia, GI sleeve below ground for taking the earth wire & cable, 8 SWG earth wire , 19 mm PVC conduit embedded in pole to take the flexible wire & earth wire to the fixture,etc, complete as required and as directed by Engineer-in-charge.Pole is suitable for Pole top mounting of LED light fixture of 90W, suitable for 240V,single phase, AC. The bracket shall be suitable for 50/90W LED street light fitting.
10
-
-
... More
Civil works for pole:-Scope includes earth excavation of any type of soil to depth of 500mm & width of 500mm,providing 1 : 2 : 4 concrete foundation of size 500 mmx500 mmx500 mm deep, coping,backfilling,providing compactness,levelling & finishing surface to initial condition. Constructing 1:2:4 concrete pedestal(500x500x100 mm height) for mouting the pole.prior approval from structural consultant is required.
10
-
-
... More
Post Top Pole: Supply and installation of Post top pole 80mm dia, 5m high , class "c" GI pipe including baseplate of 100mmx100mmx12 mm thick to weld the pole, J bolts, including cutting, threading, welding,loop in-loop out 6 way connector(connectwell) for cable connection, 10A SP MCB, interconnecting cable, supply of PVC pipe,40mm dia GI sleeve below ground for taking the earth wire & cable, 8 SWG earth wire , 19 mm PVC conduit embedded in pole to take the flexible wire & earth wire to the fixture,etc, complete as required and as directed by Engineer-in-charge.Pole is suitable for Pole top mounting of LED light fixture of 60W, suitable for 240V,single phase, AC. The bracket shall be suitable for 60W LED post top light fixture.
5
-
-
... More
Civil works for post top pole:-Scope includes earth excavation of any type of soil to depth of 300mm & width of 200mm,providing 1 : 2 : 4 concrete foundation of size 200 mmx200 mmx300 mm deep, coping,backfilling,providing compactness,levelling & finishing surface to initial condition. Constructing 1:2:4 concrete pedestal(200x200x100 mm height) for mouting the pole.Refer drawing for details.prior approval from structural consultant is required.
5
-
-
... More
ELECTRICAL LV PANELS, UPS, DG SET, HT SUBSTATION EXTERNAL
LT PANELS AND SUB-PANELS
Supply, fixing, Testing & Commissioning of LT Kiosk (Outdoor Type) 1 No. 400 Amps 4 pole 36 KA MP based MCCB with O/C, S/C, S/T, E/F, Aux., RHOM, Spreaders & Phase Barriers. Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port (EM 6400) , 400/5A 5VA burden Cl:1.0 resin cast CT's, Restricted Earth Fault relay relay with suitable 400/5A, 5VA burden Cl:PS resin cast CT's, control MCB , RYB Indication lamps and “ON/OFF & Trip" indicating lamp. With necessary Al. bus bars, interconnections. MCCBs should have two (spare) potential free contactor & All ACB's should be with RS 485 Port for BMS monitoring.
400A Amps 4P Aluminium bus bars : The neutral bus bars shall have the Full capacity of phase bus bars (0.8A/Sq. mm.), Complete All as per BOQ & Single Line Diagram, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, fixing, Testing & Commissioning of DG AMF Panel (Indoor Type) 1 No. 400 Amps 4 pole 36 KA MP based Motorised MCCB with O/C, S/C, S/T, E/F, Aux., RHOM, Spreaders & Phase Barriers. Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port (EM 6400),1 set 400/5A 5VA burden Cl:1.0 resin cast CT's, KWH Meter, AMF relay with suitable 400/5A, 5VA burden Cl:5P10 resin cast CT's, control MCB , RYB Indication lamps and “ON/OFF Illumination Push Button & Trip" indicating lamp, On Delay Timer, Auto manual selector switch, 12-Window Annunciator, Hooter, DG Running Hour meter, Impulse counter, Aux. Contactor 2NO+2NC,230V AC, Aux Contactor 2NO+2NC,24V,DC, Plug in relay with base, Battery charger 20A (SMPS), DC Ammeter-96 sqmm, DC Voltmeter-96 sqmm, Indicating Lamps 230V AC RED, Auxiliary contactors, Relays, Selector switches for control logic, Illumination Push Buttons for ack, reset, test, Engine Start, Stop. All Accesories suitable AMF Logic With necessary Al. bus bars, interconnections. MCCBs should have two (spare) potential free contactor & All ACB's should be with RS 485 Port for BMS monitoring.
400A Amps 4P Aluminium bus bars : The neutral bus bars shall have the Full capacity of phase bus bars (0.8A/Sq. mm.), Complete All as per BOQ & Single Line Diagram, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, fixing, Testing & Commissioning of Main LT Panel (Indoor Type) EB Incomer : 1 No. 400 Amps 4 pole 36 KA MP based Motorised MCCB with O/C, S/C, U/V, S/T, E/F, Aux., Spreaders & Phase Barriers. Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port (EM 6400), 400/5A, 5VA burden Cl:1.0 resin cast CT's, 2O/C+1E/F relay with suitable 400/5A, 5VA burden Cl:5P10 resin cast CT's, 3nos. 250/5A, 5VA burden Cl:5P10 resin cast CT's for APFCR, control MCB , RYB Indication lamps and “ON/OFF Illumination Push Buttons & Trip" indicating lamp, 40KA Transient voltage surge suppressor with suitable MCB. DG Incomer: 1 No. 400 Amps 4 pole 36 KA MP based Motorised MCCB with O/C, S/C, U/V, S/T, E/F, Aux., Spreaders & Phase Barriers. Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port (EM 6400) , 400/5A, 5VA burden Cl:1.0 resin cast CT's, 2O/C+1E/F relay with suitable 400/5A, 5VA burden Cl:5P10 resin cast CT's, control MCB , RYB Indication lamps and “ON/OFF Illumination Push Buttons & Trip" indicating lamp, 40KA Transient voltage surge suppressor with suitable MCB. Bus Coupler: 1 No. 400 Amps 4 pole 36 KA MP based Motorised MCCB with O/C, S/C, U/V, S/T, E/F, Aux., Spreaders & Phase Barriers. Instruments Panel: control MCB, RYB Indication lamps and “ON/OFF Illumination Push Buttons & Trip" indicating lamp.
1
-
-
... More
The all Incomers & buscoupler shall be provided with both mechanical & electrical Interlocking arrangements with individual A/M Selector Switch & Emergency Push Button. (Incoming) 250A 36KA TP MP based, O/C, S/C, S/T & Aux. MCCB - 1 EA with Digital type Ammeter with RS 485 Port, 250/5A, 5VA burden Cl:1.0 resin cast CTs, Control MCB, Front RHOM, Spreaders & Phase Barriers, 250A 36KA TPN MP based, O/C, S/C, S/T & Aux. MCCB - 3 EA, 100A 25KA TPN TMD based, O/C, S/C, S/T & Aux. MCCB - 6 EA, 63A TPN TMD based, O/C, S/C, S/T & Aux. MCCB, 25 KA – 3 EA (Outgoings) With necessary Al. bus bars, interconnections, All the Outgoing feeder should be with Digital type Multi Data meter with RS 485 Port (EM6436), ....../5A, 5VA burden Cl:1.0 resin cast CTs, Control MCB, Front RHOM, Spreaders & Phase Barriers Etc. All MCCBs should have two (spare) potential free contactor & All ACB's should be with RS 485 Port for BMS monitoring. 400A Amps TPN Aluminium bus bars : All the neutral bus bars shall have the half capacity of phase bus bars (0.8A/Sq. mm.), Complete All as per BOQ & Single Line Diagram, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
-
-
-
... More
Supply, Fixing, Testing & Commissioning of HVAC ODU PANEL (IN DOOR TYPE) Incomer: 1 No. 100 Amps 4 pole 25 KA MP based MCCB with O/C, S/C, S/T, AUX, Spreaders & Phase Barriers.Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port(EM 6400), 1set of 100/5A, 5VA burden Cl:1.0 resin cast CT's, control MCB, RYB Indication lamps and “ON/OFF & Trip" indicating lamp, 25KA Transient voltage surge suppressor with suitable MCB. Outgoing: 63A 4P MCB, 10 KA with O/C, S/C– 7 EA With necessary Al. bus bars, interconnections. MCCBs should have two (spare) potential free contactor for BMS Monitoring. 100A Amps TPN Aluminium bus bars(0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, Fixing, Testing & Commissioning of UTILITY PANEL (IN DOOR TYPE) Incomer: 1 No. 63 Amps 4 pole 25 KA TMD based MCCB with O/C, S/C, S/T, Aux., Spreaders & Phase Barriers..Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port(EM 6400), 1 set of 63/5A, 5VA burden Cl:1.0 resin cast CT's, control MCB, RYB Indication lamps and “ON/OFF & Trip" indicating lamp, 25KA Transient voltage surge suppressor with suitable MCB. Outgoing: 63A 4P MCB, 10 KA – 1 EA, 40A 4P MCB, 10 KA – 7 EA, With necessary O/C, S/C. Al. bus bars. 63A Amps TPN Aluminium bus bars(0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, Fixing, Testing & Commissioning of UPS O/P PANEL Incomer: 2 Nos. 100 Amps 4 pole 25 KA TMD based MCCB with O/C, S/C, S/T, Aux., Spreaders & Phase Barriers..Instruments Panel :1 EA for all incomers 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port(EM 6400), 100/5A, 5VA burden Cl:1.0 resin cast CT's, control MCB, RYB Indication lamps and “ON/OFF & Trip" indicating lamp, 25KA Transient voltage surge suppressor with suitable MCB. The all Incomers shall be provided with parallel operated busbar as per the instruction by UPS Vendor.
Outgoings: 63A 4P D Curve MCB, 10 KA with O/C, S/C. – 8 EA (OUTGOINGS) With necessary Al. bus bars, interconnections. MCCBs should have two (spare) potential free contactor for BMS monitoring. 200A Amps 4P Aluminium bus bars : All the neutral bus bars shall have the same capacity of phase bus bars (0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, Fixing, Testing & Commissioning of LIGHTING PANEL Incomer: 1 No. 63 Amps 4 pole 25 KA TMD based MCCB with O/C, S/C, S/T, AUX, Spreaders & Phase Barriers.Instruments Panel :1 EA. of 1-8A ELR with CBCT, Digital type Multi Data meter with RS 485 port(EM 6400), 1set of 63/5A, 5VA burden Cl:1.0 resin cast CT's, control MCB, RYB Indication lamps and “ON/OFF & Trip" indicating lamp, 25KA Transient voltage surge suppressor with suitable MCB. Outgoing: 40A 4P MCB, 10 KA with O/C, S/C. – 6 EA, 40A 4P MCB, 10 KA with O/C, S/C. – 2 EA With necessary Al. bus bars, interconnections. 63A Amps TPN Aluminium bus bars(0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, Fixing, Testing & Commissioning of UPS I/P & O/P BREAKER MCCB Enclosure Panel FOR 40KVA UPS: 100A 4P 25KA TMD MCCB With O/C, S/C, S/T & AUX. Spreaders & Phase Barriers with necessary Aluminium bus bars, interconnections, providing ON,OFF,TRIP Indication Lamp, RYB phase indication lamp, Control MCB. All MCCBs should have two (spare) potential free contactor for BMS monitoring. All the neutral bus bars shall have the Same capacity of phase bus bars (0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
Supply, Fixing, Testing & Commissioning of Lift Control Panel: Incomer: 1no. 63A 4P 10KA MCB With O/C, S/C with Instruments Panel :1 EA. Digital type Multi Data meter with RS 485 port(EM 6436), 1set of 63/5A, 5VA burden Cl:1.0 resin cast CT's, control MCB, RYB Indication lamps and “ON/OFF & Trip" indicating lamp. Outgoing: 40A 4P 10KA MCB with O/C, S/C - 1EA, 16A SPN 10KA MCB with O/C, S/C - 3EA, 16A DP 30mA ELCB - 1 EA, 16A SPN 10KA MCB with O/C, S/C with 16A Soket & Switch - 1 EA. All breakers with necessary Aluminium bus bars, interconnections. MCCBs should have two (spare) potential free contactor for BMS monitoring. All the neutral bus bars shall have the Same capacity of phase bus bars (0.8A/Sq. mm.). Complete All as per BOQ & Single Line Diagram with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
1
-
-
... More
DG System & Connected works
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 180 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 30.90 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 300 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG
1
-
-
... More
Exhaust System:
Supplying, fixing & installing exhaust pipe fabricated out of 5 mm thick Class B MS and all fixing accessories and hardware for the following with 28G, aluminium sheet cladding & 100 mm thick 150 kg / cu M density mineral wool insulation wrapped in chicken mesh including all supporting structure with arrangements like Supporting frames, Hooks, Clamps, Hardware & Fasteners Etc complete as required.
Vendor shall submit the back pressure calculation and sizing of exhaust pipe along with the quote
The installation rate shall include necessary anti vibrating mounts/Hightech spring supports/MS angle supports at standard intervals. Vendor shall ensure that the Exhaust pipe vibration/heat is not transferred to the building. The exhaust pipes shall be supported in such a way that free thermal expansion of the pipes is possible, with out exerting pressure on the the structures etc. Also vendor shall provide expanion bellows and spring supports at suitable intervals for horizontal lengths to allow free expansion.
5" /125mm dia (or as per back pressure calculation to be submitted by vendor) class 'B' M.S pipe as per IS 3589, for exhaust pipe with provision to check the carbon emission with necessary necessary bends , flanges,flexible bellows, reducers , Fasteners & gaskets (for 180kVA - DG set)
5
-
-
... More
Supply & Fixing of Thermal Insulation for 5" class 'B' MS pipe With 50mm thick, 64kg/Cu.m LRB mineralwool/glass wool lagging and aluminium cladding , Inclusive insulation of bends flanges etc., (for 180kVA - DG set)
5
-
-
... More
Supply & Fixing of mineralwool/glass wool lagging for silencers
1
-
-
... More
Supply, erection, testing and commissioning of "Y" connection to the MS Exhaust pipe with all necessary supports welding arrangements as specified to suit the site condition, all complete as per relevant standard, technical specification and direction of Engineer in charge.
1
-
-
... More
Supply, erection, testing and commissioning of 125mm dia 90 degree bend exhaust pipe including covering with 50 mm thick glass wool, chicken mesh and aluminium cladding for connecting as inlet and outlet to Engine and Exhaust Chimney, all complete as per relevant standard, technical specification and direction of Engineer in charge.
1
-
-
... More
Supply, installation, testing and commissioning of 125mm dia Flexible Bellows For Exhaust System SS expansion joints (Grade SS 304)
1
-
-
... More
Supply & Fixing of hitech spring bottle type supports and hardwares
1
-
-
... More
Fuel Piping:
Class " B" 25mm dia M.S. Pipes duly painted of suitable sizes for fuel pumping between Day Tanks/Intermediate tanks,overflow tanks , and engine etc.. Quoted rate shall include Fuel Piping with Ball Valves, flanges, fuel flow meter, and accessories,necessary hardware, collars, bends, adopters,valves,solenoid valves,overflow pump motor,fuel flow meter with electronic out put etc.,
10
-
-
... More
Hand operated fuel transfer pump with flexible hose PVC pipe of 5M length.
1
-
-
... More
Supply & Fixing of 25mm - ball valves and necessary hard ware and flanges.
1
-
-
... More
Miscelleneous:
Supply and erection of stand alone structure for Exhaust pipe supporting system with ISMC, ISAs complete including red oxide, 2 coats of anti rusting primer and synthetic enamel painting of approved colour from client and RCC foundation etc., complete. The approval for the proposed steel structure shall be obtained from the structural
250
-
-
... More
Supply and erection of Conventional Lightening arrester with down conductor 25x6mm GI strip to the earth pit.
1
-
-
... More
Supply and erection of LED Pilot lamp on the DG Exhaust stack structure with 3cx1.5sqmm armoured copper cable in suitable MS conduit.
1
-
-
... More
EARTHING SYSTEM
'Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). In all types of Strata
17
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately).
17
-
-
... More
Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)
17
-
-
... More
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode
17
-
-
... More
'Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode
10
-
-
... More
Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.
17
-
-
... More
Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
17
-
-
... More
Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required
17
-
-
... More
Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
17
-
-
... More
Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required
17
-
-
... More
Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc as required
17
-
-
... More
Supplying and erecting copper strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.
17
-
-
... More
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.
17
-
-
... More
LIGHTNING PROTECTION
'Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required
17
-
-
... More
Reveting sweating and soldering of copper/ GI tape ( with another copper/ GI tape base of the finial or any other metallic object) as required
17
-
-
... More
Providing and fixing GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for horizontal run)
17
-
-
... More
Providing and fixing GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for verticle run)
17
-
-
... More
Providing and fixing testing joint made of 20 mm x 3 mm thick GI strip 125 mm long with 4 Nos of tinned brass bolts nuts check nuts and spring washers etc. complete as required
17
-
-
... More
Providing and laying GI tape 32 mm x 6 mm from earth electrode directly in ground as required
17
-
-
... More
Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/recessed steel/PVC conduit of approprriate size including connections etc. complete as required of following size. (a) 2 x 1.5 sq.mm
17
-
-
... More
Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/recessed steel/PVC conduit of approprriate size including connections etc. complete as required of following size. (b) 4 x 1.5 sq.mm
17
-
-
... More
MISCELLANEOUS
Supply and fixing of LAMINATED Single line diagram chart duly framed with 5mm thick glasssuitable to mount on wall. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
17
-
-
... More
Preparation & Submission of AS-Built drawings, Completion Report, Inspection report, Commissioning report and Equipment O & M manuals etc. and handing over to client, with all lead and Lifts and as directed by the Engineer-In-Charge of the work.
17
-
-
... More
TELEPHONE, NETWORKING & CCTV
TELEPHONE SYSTEM
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (a) 2 Pair
17
-
-
... More
Supplying and drawing/fixing jelly filled unarmoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (c) 20 Pair
17
-
-
... More
Supplying and drawing/fixing jelly filled unarmoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (d) 50 Pair
17
-
-
... More
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (d) 50 Pair
17
-
-
... More
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (e) 100 Pair
17
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (b) 20 Pair
17
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (c) 50 Pair
17
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (d) 100 Pair
1
-
-
... More
Supplying, erecting and commissioning of Discoonection type Krone Module, ITD.DOT approved, having capacity of 10 pairs with silver plated terminal contacts, complete as required.
17
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
17
-
-
... More
DATA AND NETWORKING SYSTEM
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6
17
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
17
-
-
... More
Supply,Installation, testing and commissioning of EPABX:
Configured for : 30 Channel ISDN PRI. 08 Digital Extensions, 216Analog Extensions with CLI, 20 SIP Based Extensions. Basic Features :
• Inbuilt :Voice mail facilities with 2 Hours of Recording Time
• ( Expandable by adding License )
• Inbuilt 3 Level DISA/DOSA/OGM
• Remote IP and Smart Phone Extensions Compatibility
• IP/ ISDN /TDM – Compatibilities • Built in-Networking Facilities (Q sig, ARS on VOIP
• Multi Conferencing Facilities upto to 32 Party • 32 Bit Microprocessor • Power Failure Transfers
• Built In 10/100 Ethernet Port for Computer Telephony Integration • Built in USB Port for management Applications • Built in Battery Interface port to connect external Batteries • Built In LCR and ARS Facilities • Auth code and Walking Class of service facilities • SMDR/CDR for Call Tracking Facilities • Built in Hotel /Motel Applications • DECT Compatibility ( IP AND TDM)
• 1000 Entries Speed Dialing
• Pre Installed Communication Assistance
• Paging Port – For External and Internal Paging Facilities *
• Expandable up to -8000 Ports on One Look Network
1
-
-
... More
Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification no. WG-NAS/RAK
1
-
-
... More
Supply,Installation,testing and commissioning of Blanking panels to cover unused space of 1200mm x 800mm racks
17
-
-
... More
Supply,Installation,testing and commissioning of 1-Phase Intelligent PDU with power cable, communication cable & compatible software should have minimum 24 Ports out of which minimum 15 ports for IEC C13 and Minimum 3 Ports for IEC C19 high retention sockets for single phase 230V, 32A. Remaining 6 Sockets may be of any combination of IEC13 and IEC 19. 32A, single phase 3 pin industrial socket for input power to IPDU. The PDU shall have the provision for tool less mounting for 0U mounting capability in the rack.
PDU should support integration with Power Management Software/DCIM/BMS tool over SNMP.
PDU should be supplied with Temperature and Humidity Sensors for measuring Temperature and humidity. Total of 2 sensors per rack i.e one in Top of the rack & one in bottom of the rack.
PDU should have current protection, PDU should have an audible alarm (beeper) along with system alert to indicate current overload. PDU should support variety of protocols including HTTP, HTTPS, IPV4,IPV6, SMTP, TCP, UDP, SSL, SNMP, DHCP. PDU should have LCD Display to display the power information from Line and CB. PDU should support USB or Ethernet Cascading up to 4 PDU. PDU should have field replaceable communication module/Network card, PDU should have Network Ports 10/100/1000 mbps ports with option to control the individual outlet/socket (ON, OFF & Reboot) remotely. Real time Monitoring values of frequency, Current per phase, voltage, Apparent and Active power (kVA, kW), Power Factor (PF) and cumulative Energy consumption (kWh), PDU shall able to report error and alarm through email.
1
-
-
... More
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480 mm) as per specification no. WG-NAS/RAK
17
-
-
... More
Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP
17
-
-
... More
Supplying and installing a PBT loose tube HDPE sheathed armoured single mode optical fiber cable with 12 fiber, core dia 9/125μm (OS1/OS2) 10 GBPS speed compliant to IEC 60793/IEC 60794 standards in provided pipe/trench complete.
17
-
-
... More
Supply, Installation, Testing and Commissioning of OFC Patch Panel with pig Tails - SC type, single mode, patch Cord 9/125micron SC to SC with Necessary Accessories.
17
-
-
... More
Supply, Installation, Testing and Commissioning of Single Mode 10/100/1000MBPS single mode SC type Media converter
17
-
-
... More
Supply, Installation, Testing and Commissioning of single core pig Tails with Necessary Accessories.
17
-
-
... More
Supply, Installation, Testing and Commissioning of single mode 2 mtr OFC Patch cord 9/125Micron (SC-SC).
17
-
-
... More
Supply, Installation, Testing and Commissioning of 1mtr CAT-6 Patch Cord
17
-
-
... More
Supply, Installation, Testing and Commissioning of 2mtr CAT-6 Patch Cord
17
-
-
... More
TV, VGA, HDMI SYSTEM
Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) RG - 6
17
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
17
-
-
... More
Supply, Installation, Testing and Commissioning of VGA outlet with female connectors at both end the cost shall be inclusive of interconnection between the male and female connector, metalbox, front plate, for complete installation. The box shall be flush mounted on wall as required for gadgets.
17
-
-
... More
Supply, Installation, Testing and Commissioning of VGA CABLING, approved make, including ferrule numbers and terminations/crimping at either ends in Existing PVC conduit as per drawing.
17
-
-
... More
Supply, Installation, Testing and Commissioning of HDMI outlet with female connectors at both end the cost shall be inclusive of interconnection between the male and female connector, metalbox, front plate, for complete installation. The box shall be flush mounted on wall as required for gadgets.
17
-
-
... More
Supply, Installation, Testing and Commissioning of HDMI cables, approved make, including ferrule numbers and terminations/crimping at either ends in Existing PVC conduit as per drawing.
17
-
-
... More
Supply, Installation, Testing and Commissioning of USB outlet for data transfer with female connectors at both end the cost shall be inclusive of interconnection between the male and female connector, metalbox, front plate, for complete installation. The box shall be flush mounted on wall as required for gadgets.
17
-
-
... More
Supply, Installation, Testing and Commissioning of USB cables, approved make, including ferrule numbers and terminations/crimping at either ends in Existing PVC conduit as per drawing.
17
-
-
... More
CCTV SYSTEM
ACESS CONTROL SYSTEM
Supply, installation, testing and commissioning of Access Intelligent Controller support 2 standard Weigand Interface or up to 16 Input & 8Output port as per the specification with enclosure , power supply ,& Maintenance free Batteries with 30 minutes back up. The controllershould be minimum 32 bit embedded microprocessor chip and on board TCP/IP as per the Specification. The Controller Should have flash Memory ,can store 55000 Card holder & 45000 transactions in offline mode, FCC,CE & complete as per the specifications.
1
-
-
... More
Supply, Installation, testing and commissioning of Workstation with Intel i10 3 GHz ,6GB of RAM , Windows 10 Professional 64-bit Graphics card capable of 1280x1024 pixel resolution and 65K colours, 1 TB Hard disk drive , external 1GB Independent Graphic Card,DVD ROM drive , with VGA cards suitable for Dual monitor output.
1
-
-
... More
Supply, installation, testing and commissioning of Access Control Software consisting of Access control system, Access Alarm Document, Time & Attendence software with 1 client license, Graphical layout as per specification. T&A reports with Present, Absent , single swipe, leave, weekly off, holiday, holiday present, on duty with possibility of data export in .XLS format . T&A application shall be web browser based. Capable of handling large proprietary corporations with alarm monitoring, video imaging, badging, CCTV integration, visitor management, email notification, BAS integration. The system shall assure long time performance, cost effective upgrade capability and allow for easy expansion or modification of inputs, outputs and remote control stations. Software for Photo ID badging and card Issue Terminal.Following integration features shall be considered & as per the specifications.
1
-
-
... More
Supply, installation, testing and commissioning of Series Dual Reader Module. Provides two reader ports, up to eight supervised inputs and up to six relay outputs. One tamper input and one power monitor input when tile mounted. Connection to the RS485 bus at 38400 bps. The rate shall include all fixing accessories as required. Make:Bosch/Honeywell/Equivalent.
1
-
-
... More
Supply, installation, testing and commissioning of Series Single Reader Module. Provides two reader ports, up to eight supervised inputs and up to six relay outputs. One tamper input and one power monitor input when tile mounted. Connection to the RS485 bus at 38400 bps. The rate shall include all fixing accessories as required.
17
-
-
... More
Supply, installation, testing & commissioning of Biometric Fingerprint Reader with Keypad and LCD for Time Attendance & Access Control, 5000 FP Template Capacity, inbuilt Smart Card Reader 13,56 MHz, FP Template on card, wall mounted, ISO 14443A as per specification.Biometric Fingerprint Enroller with capabiltiy to write FP Template on Card and System database, ISO 14443A
1
-
-
... More
Supply, installation, testing and commissioning of Electromagnetic locks, suitable for any type of doors as per specification/drawings and as required to make it complete. The rate shall include all fixing accessories as required.
17
-
-
... More
Supply, installation, testing and commissioning of Magnetic Contacts with door position sensor Complete in all respects. The rate shall include all fixing accessories as required.
17
-
-
... More
Supply, installation, testing and commissioning of Exit Push button unit complete in all respects. The rate shall include all fixing accessories as required.
17
-
-
... More
Supply, installation, testing & commissioning of Mannual key override as per the specifications.
1
-
-
... More
Supply, installation, testing & commissioning of Junction Box to house Door control Modules. D- 450 (W) x 600 (H) x 115 (D).
17
-
-
... More
Supply, Installation, Testing & commissioning of Battery - 12 Volt DC - for controllers.
1
-
-
... More
Supply, installation, testing and commissioning of 8 Core , 0.2SQMm/22 AWG Screened multi strand copper unarmored Shielded Cable with drain Wire in 25mm dia 2mm thick FRLS PVC conduit.
17
-
-
... More
Supply, installation, testing and commissioning of 4 Core , 1.5SQMm/ 22 AWG Screened multi strand copper unarmored Shielded Cable with drain Wire in 25mm dia 2mm thick FRLS PVC conduit.
17
-
-
... More
CONDUITS FOR ELV SYSTEM
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm
17
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. '(b) 25 mm
17
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. '(c) 32 mm
17
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (e) 50 mm
17
-
-
... More
FIRE FIGHTING WORK
PUMPS AND ACCESSORIES
Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1600 to 1800 LPM at 70 to 55 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 30kW or of suitable kW capacity for manual/automatic operation and consisting of following :
(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP
1
-
-
... More
Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :
(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP
1
-
-
... More
Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
2
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
2
-
-
... More
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FFVL/
BFV
1
-
-
... More
Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
1
-
-
... More
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
1
-
-
... More
Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power
connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows
a. Main fire pump(MFP) having capacity of 22kW 1no (1 working)
b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features & switchgears:
1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.
2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc.
1
-
-
... More
3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.
4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch.
5. TPN SPD 100kA Type 1 +2 tested.
6. Required pressure transducer with pressure indication on panel with cabling required for monitoring & automatic operation of fire pumps.
7. System controller to control operation of main electric fire pump, jockey (pressurization) pumps in sequence with interlocking for operation of pumps as per specification with automatic/manual operation with selector switch & alternate run of standby Pumps consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification. 8.Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications.
9. Siren of required capacity to be activated when main pump starts & allied accessories as per requirements of local CFO or as directed by engineer in charge.
10. Danger board as per IS.
11. Spare HRC fuses minimum 2 nos of each individual rating with required bakelite fuse holder for main & jockey fire pumps MFP=(1working), JP = (1working+1standby, alternate run per start in auto mode) complete panel, as per specification no. FF-MFP/ECP
-
-
-
... More
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
4
-
-
... More
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
2
-
-
... More
Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT
1
-
-
... More
Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
8
-
-
... More
Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)
7
-
-
... More
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
15
-
-
... More
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV
4
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves of 25mm dia (PN 1.6) with fittings of screwed end type.
5
-
-
... More
Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FFFFA/ NZ
8
-
-
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
17
-
-
... More
Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FFFA/FMC
1
-
-
... More
Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC
1
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
138
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
22
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP
12
-
-
... More
Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bicolour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FFAFAS/ SD.
56
-
-
... More
Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with 0°C to 58°C temperature range, with base as required, single/twin LED’s with 360 degree view, in-built locking mechanism to check the removal and pilferage of the detector, Detector Shall conforming to IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FF-AFAS/HD - ROR.
1
-
-
... More
Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP.
5
-
-
... More
Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter with flasher, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty
5
-
-
... More
Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification no. FF-AFAS/CP.
1
-
-
... More
Supplying, installing, testing and commissioning of addressable fire isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. module complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, FF-AFAS/ISM
3
-
-
... More
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling omplete as per specification no. CB-LT/CU
765
-
-
... More
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.
11
-
-
... More
S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
1
-
-
... More
Clean Agent (HFC326FA TYPE) gas.5 kg Capacity modular type fire Extinguisher. fire Extinguisher made up of Mild Steel & duly hot phosphate & powder Coated External as Well as Internal the fire Extinguishers is hydrotested at 30kg/cm^2
2
-
-
... More
Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminescent aluminum sheet 1.0 mm thick containing luminescent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects
-
-
-
... More
Fire extinguisher Signage size :200X250
11
-
-
... More
Hose reel Signage
size :200X250
4
-
-
... More
Assembly Point Signage
size :600X600
1
-
-
... More
Fire Alarm Signage
size : 200X250
5
-
-
... More
Staircase Signages size 100X300
2
-
-
... More
Lift
size 200X200
2
-
-
... More
Ramp
size 200X200
1
-
-
... More
Parking size 200X200
3
-
-
... More
Directional Signages
Size 200X250
3
-
-
... More
Signages to be installed near Electrical Panel Room etc.
1
-
-
... More
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
1
-
-
... More
HVAC
VRV / VRF OUTDOOR UNIT
Supplying, erecting, testing and commissioning of 34HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
2
-
-
... More
Supplying, erecting, testing and commissioning of 30HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
1
-
-
... More
VRV / VRF INDOOR UNIT
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 0.8TR (441 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation
9
-
-
... More
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
6
-
-
... More
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
12
-
-
... More
Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC
8
-
-
... More
REMOTE CONTROLLER
Supply, installation, testing and commissioning wireless remote control having colour LCD panel, real time clock, temperature limitation (16 to 30° C, functions like filter clean reminder timer suitable to communicate with wired controller complete.
126
-
-
... More
Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system.
4
-
-
... More
COPPER PIPING
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
146
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
156
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
166
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
162
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
126
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.
22
-
-
... More
supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
60
-
-
... More
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
114
-
-
... More
Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.
56
-
-
... More
DRAIN PIPING
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & fittings, including jointing of pipes & fittings with one step UPVC solvent cement, & 19mm insulation & testing of joints complete as per direction of Engineer [SCH-40(blue)/(white)]
-
-
-
... More
25mm outer dia.
90
-
-
... More
32mm outer dia.
132
-
-
... More
FRESH AIR
Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete (Used for exhust fan )
4
-
-
... More
Supplying and erecting circular rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete.
40
-
-
... More
Supplying and erecting circular rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete.
35
-
-
... More
Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete.
12
-
-
... More
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
15
-
-
... More
INTERIOR
CALCIUM SILICATE TILE GRID FALSE CEILING
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24/15x38 mm of length 3000 mm, cross - T of size 24/15x32 mm of length 1200 mm and secondary intermediate cross-T of size 24/15x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape leveladjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24/15x24/15x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers etc. on the ceiling and also providing & fixing templates in the ceiling made of 12mm BWR (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions.
445.5
-
-
... More
VERTICAL BLINDS
Providing & fixing in position vertical blinds 100 mm wide approved blackout fabric and of approved make, colour with head rail of 25mm height and 47mm wide extruded high strength anodised aluminium alloy section. End control unit state of art reduction ratio of 3:5:1 for a very smooth operation of the blind. It shall include all necessary fittings and fixtures like tilt rod, tilter chain , carrier/ runner, spacers, installation bracket, cord weight, cord, bottom mechanism consisting of weight and chain etc. complete. All material shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.
48
-
-
... More
ROLLER BLINDS Providing & fixing in position roller blinds of approved make, color, shade of varying length, approved fabric with aluminum extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.
118.5
-
-
... More
PIN -UP BOARDS (SOFT BOARDS)
Supply and installing in position soft display board having aluminum frame including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares and easy fixing to the wall. All material shall be of approved make. All works complete as per the drawing / Image, specification and direction of the Engineer. SIZE - 1000mm (L) X 350mm (HT)
15
-
-
... More
MAGNETIC WHITE MARKER BOARD (SIZE : 2400mm(L) x 1200mm(HT)
Providing and fixing in position approved Magnetic white matt finish marker board of (SIZE - 2400 X 1200 ) having Moulded Anodized Aluminium frame & stain resistant porcelain coated 28 gauge steel backing with Virgin ABS (Acryloniprile Butadiene Styrene) Molded 300x100mmm Chalk tray and Eraser complete, including all accessories. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.
3
-
-
... More
NOTICE BOARD (SIZE: 1200mm (L) x 900mm (HT) Providing and fixing in position Notice board of size 1200mm(L) X 900(HT) mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.
3
-
-
... More
SOLID PARTITION FINISHED WITH PAINT FINISH
Providing & fixing in position full height solid partition made out of aluminium framework of size 65mm x 38 mm tubular frame ,18 gauge having grid spacing at 600mm x600mm center to center both ways & covered with 12 mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with paint finish of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. All material will be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
23
-
-
... More
STAINLESS STEEL DUST BIN (300mm dia x 650mm ht )
Providing and placing in position 16 gauge pedal stainless steel dust bin of grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.
30
-
-
... More
MIRROR (Size- 900mm(L) x1200mm(HT)
Providing & fixing in position 6mm thickness Mirror on wall using 304 grade S.S studs with crystal polished edges with required accessories. The mirror shall have holes of suitable diameter for fixing SS. studs, with necessary hardware, labour, fixing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
8
-
-
... More
Providing and fixing of main Signage board of specified design and colour made of 15 mm thick letterings made of acrylic and pasted with special glue/tape to the existing glass.
2
-
-
... More
Providing and fixing of Signages made of brush steel finish 1mm thick Alluminum Composite Panel (ACP) sheet . The sinagae to be fixed with special tape at given locations etc complete.
-
-
-
... More
Size 30x5 cms (Cabins)
30
-
-
... More
Size 30x10 cms (Common Areas)
10
-
-
... More
Size 15x20 cms (Directions)
20
-
-
... More
Size 3x10 cms (Push /Pull)
80
-
-
... More
FURNITURE
Supplying and placing in position Executive Table with Return Unit which is high gloss PU- finish panels, with toughened streak glass modesty for the main desk. It is equipped with a push-to-open mechanism for the drawer. All material shall be Godrej/ Durian/ feather lite make and colour. Size L=150cm W=75cm H=75cm. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note: the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
5
-
-
... More
Supplying and placing in position Executive High back Chair with quilted leatherette, height-adjustable lumbar support, height-adjustable armrests, coat hanger at the top and chrome pedestal at the bottom. It should enable two seat depth for different body structures, and a four-position locking mechanism. All material shall be Godrej/ Durian/ feather lite make and black colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
20
-
-
... More
Supplying and placing in position Visitor chair with thick seat, back cushions, wide contoured seat and back to keep for an upright position and centre tilt synchronous mechanism enables tilt tension adjustment. The armrests to be of Poly Propylene durable material with 100% VOC- free powder coating. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
10
-
-
... More
Supplying and placing in position Three Seater Tandem public seating bench with medium back, thick seat, back cushions and wide contoured seat and back to keep for an upright position. The armrests to be of Poly Propylene durable material with 100% VOC- free powder coating. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
1
-
-
... More
Supplying & placing in position Workstation Table with return unit and Storage which is high gloss PU- finish panels, and appropriate modesty panel as provided by manufacturer. All material shall be Godrej/ Durian/ feather lite make and colour. Size not less than (L= 120cm, W=60cm and H=75cm) and side unit of size not less than (L= 75cm, W=45cm and H=75cm) . All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
11
-
-
... More
Supplying & placing in position Workstation Table which is high gloss PU- finish panels, and appropriate modesty panel as provided by manufacturer. All material shall be Godrej/ Durian/ feather lite make and colour. Size not less than (L= 120cm, W=60cm and H=75cm). All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
3
-
-
... More
Supplying and placing in position Conference table 6-10 seater Table equipped with a soft- closing wooden access flap for easy power and data connectivity. It should have provision for concealed wire management system under the worktop. The worktop's should have AV range containing integrate cable cubby and retractor provision. All material shall be Godrej/ Durian/ feather lite make and colour. Size not less than L=240cm, W=120cm and H= 75cm. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
2
-
-
... More
Supplying and placing in position Executive Mid back chair with in-built ergonomic adjustments for comfortable and elongated sitting position, with an adjustable lumbar support, seat height, headrest, armrests, multiple back locks, and back tilt positions. Confirming to BIFMA X5.1 standard. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
20
-
-
... More
Supplying & placing in position Modular low height storage with openable shutters made with plywood/MDF?particle board with laminate/veneer/PU finish as provided by manufacturer. All material shall be Godrej/ Durian/ feather lite make and colour. Size not less than (L= 105cm, W=45cm and H=75cm). All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
12
-
-
... More
Supplying & placing in position Modular full height storage with openable shutters made with plywood/MDF/particle board with laminate/veneer/PU finish as provided by manufacturer. All material shall be Godrej/ Durian/ feather lite make and colour. Size not less than (L= 105cm, W=45cm and H=210cm). All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
38
-
-
... More
Supplying and placing in position two Seater public seating bench with medium back, thick seat, back cushions and wide contoured seat . All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
1
-
-
... More
Supplying and placing in position centre table with metal legs . round or any shape of the choice. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
2
-
-
... More
Supplying and placing in position cafe chairs. PP Shell with Metal Powder Coated Legs. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
6
-
-
... More
Supplying and placing in position cafe chairs. PP Shell with Metal Powder Coated Legs. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
25
-
-
... More
Supplying and placing in position Folding Study Chair with Cushion and Writing Pad. All material shall be Godrej/ Durian/ feather lite make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.
(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 6th level but excluding cost of GST.)
80
-
-
... More
ICT EQUIPMENTS PART A - (CCTV CAMERA, EPBAX AND ALLIED WORKS)
CA14 IP CAMERAS- 5MP DOME IR FIXED (INDOOR)
HSN: 85258020
25
-
-
... More
CB6 NVR 4 SATA- 32CH
HSN: 85258020
1
-
-
... More
CD5 RACKS 9U
HSN: 85258020
1
-
-
... More
CD13 STORAGE 6 TB SATA HDD
HSN: 85258020
2
-
-
... More
CE22 SWITCH 8 PORT POE UNMANAGED
HSN: 85258020
1
-
-
... More
CE26 SWITCH 24
PORT,CAT 6 JACK PANEL(LOADED WITH UTP I/O)
HSN: 85258020
1
-
-
... More
CF5 PVC CASING CAPING WITH INSTALLATION PER METER
HSN: 85258020
450
-
-
... More
CF6 HDMI cable Dual ended 10 mtr
HSN: 85258020
1
-
-
... More
CF8 CAT 6A UTP
CABLE (Per Mtrs) with laying termination & installation
HSN: 85258020
770
-
-
... More
CF12 MODULAR SWITCH PLATE: 6M MODULE
HSN: 85258020
4
-
-
... More
CF17 MODULAR SURFACE BOX: 6M MODULE
HSN: 85258020
4
-
-
... More
CF20 MODULAR ELECTRICAL SWITCHES: 6AMP
HSN: 85258020
4
-
-
... More
CF21 MODULAR ELECTRICAL SOCKET: 6AMP
HSN: 85258020
8
-
-
... More
CF26 3 CORE 6 SQ. MM. ELECTRIC CABLE WITH INSTALLATION PER MTR.
HSN: 85258020
8
-
-
... More
CI1 INSTALLATION FOR CCTV(PER CAMERA)
HSN: 85258020
10
-
-
... More
CI19 Creation of LAN Point
HSN: 85258020
10
-
-
... More
CF32 INDOOR CAMERA INSTALLATION Camera back box suitable for installation of Dome / Bullet Cameras with mic.4x4 Inches
HSN: 85258020
10
-
-
... More
I27 All-in-One Video Conferencing (Television) Equipment - 55 inch- (Meeting By VU) As per RC
HSN: 56895689
2
-
-
... More
NEC EPABX system Model: SL 2100 Configured for 3 trunks & 16 extensions.
1
-
-
... More
NEC Make KTS 24 keys (For Operator)
1
-
-
... More
Panasonic speaker phone with Caller ID Model: KX-TSC 62
13
-
-
... More
MDF box 50 pair with krones
1
-
-
... More
Installation, testing & Commissioning
1
-
-
... More
Smart semi-managed POE Switch 24 Port
1
-
-
... More
ICT EQUIPMENTS PART B - (TV & UPS)
CG2 DISPLAY UNITS 40"/43" LED TV
HSN: 85258020 (TV for CCTV)
4
-
-
... More
E6 20 KVA online UPS(Three Phase Input ThreePhase Output)(ARTIS 20KVA ONLINE )
AsPerRC HSN:85049090
3
-
-
... More
LIFT
SITC of Electric Traction Passenger Lift With
· Rated capacity :- 8 Passenger/544Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs
· Location of Lift Machine:- MR/MRL · Rated speed :- 1.0 mps VS
· Car/Landing door clear opening of 800 mm wide x 2000 mm high
· Clear Car size of 1100mm wide x 1300mm deep x 2250mm high · Lift shaft available having clear size of 1900mm wide x 1700mm deep, 1600mm Pit depth, 4000mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).
1
-
-
... More
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.
-
-
-
... More
· Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30
latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.
-
-
-
... More
"· ARD complete with necessary SMF VRLA batteries.
· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge." · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.
"· General: - Job includes entire procedure of obtaining all necessary erection permissions & ""License to Work the Lift"" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning."
-
-
-
... More
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
-
-
-
... More
Add Ons for Lift traveling above 1st floor
For Lift travelling up to six floors or at a speed of 1.0 mps, add as below,
For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.
1
-
-
... More
For Full Collective control system, add as below. For Lift travelling above First floor & up to Sixth floor
1
-
-
... More
SOLAR PANEL ( 12 KVA)
Design, Supply, installation and commissioning of 11.99kWp Net-Metering based Solar Photovoltaic system
Solar Panels
Peak Power: 545 Wp Type: Mono-crystalline DCR Solar Modules Size: Standard (2279 mm X 1134 mm) Efficiency: 21.09% 10 Years Product Warranty from date of invoice 25 Years Performance Warranty from date of invoice [Min 90% at the end of 10 Years & Min 80% at the end of 25 years]
Make : Premier/ RenewSys/ Agarwal/ Equivalent
Inverter
Premium String Inverter with 2 MPPT
Model:10 kW 3 Phase Grid tie inverter
Power output (continuous) at 45°C: 10 kW
Number of MPPT: 2 nos
AC output: 400V 3-Phase + N; 50Hz
3 Phase String Inverter with MPPT Certification:
Anti-Islanding Protection-62116, Efficiency Measurements- 61683, Environmental-60068-2, Ingress Protection-60529(IP-65), Utility Interface-61727, Safety-62109-1&2; IEC-62103
7 Years Warranty from date of invoice
(Extendable to 10 Years at additional cost)
Make : GoodWe/ Solis/ Equivalent
1
-
-
... More
Online Monitoring Remote Monitoring system with string level monitoring, report generation and fault alarm system.
Make : GoodWe/ Solis/ Equivalent Mounting structures
Full rails for metal sheet roof Corrosion resistant, light weight high grade Aluminium roof top panel mounting structure with accessories for the roof. Structure used is designed for wind speeds up to 150 km/h
Make : Reputed DC Distribution / Combiner Box: DC type II SPD of Reputed Make- Protection from any Surges DC Fuses for each String-Overcurrent Protection DC MCB of reputed Make- Overvoltage / Short circuit protection AC Distribution Box for Inverter: AC MCB of Required Rating of Reputed Make AC side SPD of Reputed make for protection from any Surges Manual & Automatic Isolator Kit AC Cabling
4 Sq.mm Single Core Cu Flexible Cable. The sizes will differ based on plant capacity and will be designed to maintain less than 3 % voltage drop.
Make : Polycab/ Reputed
-
-
-
... More
DC Cabling
Solar DC Cables designed for Solar PV applications. Size: 4 Sq.mm Cu.
Make : Polycab/ Reputed Net-Metering meter
MRT tested LT Bi- directional meter for electricity import & export readings (Net Meter)
Make : Secure / L&T AMC
First Year Annual maintenance contracts
• Cleaning of solar panels – every quarter
• Electrical check and inspection – every quarter
Submission of solar generation report – Annually
Make : Solray Solutions Additional Items
Earthing Pit Kit & Cabling
Lightning Rods - 1 no. Government Paperwork & Fees
-
-
-
... More
Complete Kit Installation & Electrical Cabling
Complete Installation & electrical cabling of all components and integration with existing Grid Electrical System. All accessories required for installation of components and for electrical cabling like electrical AC Cables, Special Solar DC Cables, MC4 connector, conduit pipes, hardware, cable routing accessories and safety equipment
Make : Reputed
-
-
-
... More
LAND DEVELOPMENT AND LANDSCAPE
HARD LANDSCAPE
DRIVEWAY, PATHWAY & CARPARKING (Civil & Floor finishes)
Earthwork in excavation of foundation of structures of culverts,abntments piers, retaining walls etc. as per drawing and technical specification, including setting out construction of shoring and bracing removal of stumps and other deleterious matter, dressing of sides and bottom, back filling the excavation earth to the extent required and utilising the remaning earth locally for road work upto 3.00 m depth as per MORTH Specification 304 : EXCLUDING DEWATERING : Mechanical Means in Ordinary Rock / Hard Rock
450
-
-
... More
Preparation and Surface Treatment of formation. (Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310.)
1142.86
-
-
... More
Granular Sub-base with Close Graded Material (Table:- 400-1)
By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
120
-
-
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density)
84
-
-
... More
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
52
-
-
... More
Grey cobble stone (DRIVEWAY, PATHWAY & CARPARKING): Providing and fixing cobble stone grey colour 90 x 90 x 60mm thick strips along with "C" grooves at bottom with 5mm thk complete in line and level as per drawings. The price is including the mortar, plant and Machinery complete except the Base PCC (To be measured seperately).
255
-
-
... More
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. : Size 30 cm L x 50 cm H x 15 cm T
150
-
-
... More
CONCRETE DARK GREY COBBLE (DRIVEWAY, PATHWAY & CARPARKING): Providing and fixing cobble stone black colour 90 x 90 x 60mm thick strips along with "C" grooves at bottom with 5mm thk complete in line and level as per drawings. The price is including the mortar, plant and Machinery complete except the Base PCC (To be measured seperately).
115
-
-
... More
Kalahalli stone (EXIT COURT) : Providing and fixing Kalahalli stone 190 x 190 x 100mm thick strips with 5mm thk complete in line and level as per drawings. The price is including the mortar, plant and Machinery complete except the Base PCC (To be measured seperately).
15
-
-
... More
Carting away (DRIVEWAY, PATHWAY & CARPARKING): surplus earth/excavated material/debris and like materials outside the site and disposing off the same to the outside the city limit as directed by the Engineer-in-charge for dumping of such material,including spreading etc.,as per the norms by the local authorities.
350
-
-
... More
SOFT LANDSCAPE WORKS
Supply and plantation of following types of healthy, decorative, flowering plants, trees / palms, hedges / shrubs, ground covers / lawn, climbers, creepers, grass etc. including following work activities :
a) Rough dressing the lawn area, flower beds, planter areas , shrubbery or ground covers area etc including trenching to a depth of 30cms breaking clods flooding with water, uprooting weeds from above area after 10 to 15 days of its flooding including disposal of uprooted vegetation as directed by the engineer
b) Supply at site of work well decayed farmyard manure, from any available source approved by the engineer-in-charge including screening and stacking
c) Providing and application of COCO PIT - COCONUT FIBRE WASTE to soft landscape areas as specified by horticultural specifications
d) Spreading of sludge, dung manure or/and good earth / sand in required thickness including mixing in approved proportion
e) Supply and Application of pesticides and insecticides as per horticultural specifications
f) Supply and application of chemical weed control by means of spraying as specified by horticultural specifications
g) Maintenance up to 3 months as per specification and direction given in the Contract and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation.
-
-
-
... More
TREES
CASSIA FISTULA
5
-
-
... More
CASSIA JAVANICA
1
-
-
... More
EUGINEA
3
-
-
... More
FELICIUM DECIPIENS
1
-
-
... More
MAHOGANY
12
-
-
... More
MILLINGTONIA HORTENSIS
9
-
-
... More
TABEBUIA AVELLANEDA
5
-
-
... More
TABEBUIA ROSEA
15
-
-
... More
TERMINALIA MANTALY GREEN
18
-
-
... More
SHRUBS
ALOCASIA CALIFORNIA
35
-
-
... More
ALOCASIA GREEN
20
-
-
... More
ALOCASIA MACRORRHIZA
15
-
-
... More
ALOCASIA TEA CUPS
45
-
-
... More
ALPINIA PURPURATA
29
-
-
... More
ALPINIA PURPURATA PINK
11
-
-
... More
ALPINIA ZERUMBET VARIEGATED
10
-
-
... More
BIRD OF PARADISE
15
-
-
... More
BLACK ALOCASIA
63
-
-
... More
CALATHEA LUTEA
30
-
-
... More
CANNA DWARF YELLOW
10
-
-
... More
COPPER CALATHEA LUTEA
91
-
-
... More
COSTUS WOODSONII
14
-
-
... More
CRINUM LILY GREEN
11
-
-
... More
CRINUM LILY RED
9
-
-
... More
DRACENA DARASINGH
17
-
-
... More
HELICONIA BIHAI LOBSTER CLAW
15
-
-
... More
HELICONIA FIRE-FLASH
36
-
-
... More
HELICONIA PITACORROUM GOLDEN DI
32
-
-
... More
HELICONIA INDICA SPECTABILIS
15
-
-
... More
HELICONIA SEXY PINK
7
-
-
... More
HOMALOMENA EXPEDITA
25
-
-
... More
HYMEOCALLIS SPECIOSA
700
-
-
... More
LEAF ANTHURIUM
1
-
-
... More
OPHIOPOGAN JABURAN GREEN
237
-
-
... More
PHILODENDRON CONGO GREEN- -600 MM SPREAD
20
-
-
... More
PHILODENDRON CONGO RED- -600 MM SPREAD
10
-
-
... More
PHILODENDRON GIGANTEANA-1200MM SPREAD
2
-
-
... More
PHILODENDRON GOLDEN MELIONII-600 MM SPREAD
18
-
-
... More
PHILODENDRON SELLOUM-900MM SPREAD
43
-
-
... More
PHILODENDRON XANADU-450MM SPREAD
25
-
-
... More
TORCH GINGER
12
-
-
... More
TORCH GINGER PINK
10
-
-
... More
WALKING IRIS
299
-
-
... More
WHITE BIRD OF PARADISE
5
-
-
... More
ZAMIOCULCAS ZAMIIFOLIA-600 mm spread
10
-
-
... More
PALMS
ARECANUT PALM
9
-
-
... More
CANE PALM
14
-
-
... More
KENTIA PALM
27
-
-
... More
RED PALM
4
-
-
... More
CLIMBERS
MONESTERA DELICOSA-900 mm spread
1
-
-
... More
MONEY PLANT GREEN
100
-
-
... More
THUNBERGIA COCCINEA
39
-
-
... More
LAWN
BERMUDA GRASS
82.89
-
-
... More
BUFFALO GRASS DIPPLING
5.75
-
-
... More
FRP POTS
1200MM DIA FRP POT WITH TRAY AND STAND
1
-
-
... More
750MM DIA FRP POTS WITH TRAY AND STAND
2
-
-
... More
600MM DIA FRP POTS WITH TRAY AND STAND
1
-
-
... More
450MM DIA FRP POTS WITH TRAY AND STAND
1
-
-
... More
1000MM DIA CEMENT POTS
1
-
-
... More
EARTH WORK
SUPPLY OF RED SOIL (80%)
75
-
-
... More
SUPPLY OF COCO-PEAT(10%)
2500
-
-
... More
SUPPLY OF VERMICOMPOST(10%)
2500
-
-
... More
EXCAVATION,DEBRIS REMOVED FROM THE SITE WILL BE ADDITIONAL
4.4
-
-
... More
SUPPLY AND LAYING OF ROOT BARRIER Delta terrax or similar make
33
-
-
... More
LANDSCAPE AUTOMATIC IRRIGATION SYSTEM
Manual Irrigation Works
Pipes Work: Supply in position PVC pipe conforming to IS:4985:2000 and suitable for the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : Supreme
-
-
-
... More
PVC pipe 63mm-10 kg/cm² - Mainline
174
-
-
... More
PVC pipe 50mm-6 kg/cm²
126
-
-
... More
PVC pipe 40mm-6 kg/cm²
505
-
-
... More
PVC pipe 25mm-10 kg/cm²
12
-
-
... More
PVC pipe 20mm-10 kg/cm²
12
-
-
... More
PVC fittings
1
-
-
... More
Earth work excavation and refilling 300x450mm
550
-
-
... More
DRIP & ACCESSORIES
Supply of flexible 16mm inline tubing with resistance to UV damage, algae growth brown in colour, Longer lateral run lengh with flow rate 2.3lph to 3.4 lph, pressure rating 0.58 to 4.1 bar , Dripper Spacing at 30 cm , 40 cm & 60 cm Spacing wall thickness 1.2mm etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : NETFIRM / EQ
750
-
-
... More
Supply of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH / ARMAS
3
-
-
... More
Supply of 40mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : XERITECH
3
-
-
... More
Supply of 9 - Gauge Galvanized Steal Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
532
-
-
... More
Supply of Gromatetake off Connects XF Series Drip Line and Blank Tubing to PVC Mainlines at Low Pressures. 17mm GTO etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
110
-
-
... More
Supply of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm Tee . etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
110
-
-
... More
Supply of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm COUPLING. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
50
-
-
... More
Supply of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm ELBOW. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
50
-
-
... More
Supply of 17mm End cap S Type for dripline closure at the end of the dripline etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
110
-
-
... More
SPRINKLERS & ACCESSORIES
Supply of Pop up spray head RD 1804 SAM PRS Series Spray bodies, with Rotary nozzle with capable of covering 2.4m -7.3m at 1.4 - 3.8 Bars pressure, Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to 270 degree or full circle True flushing mechanism,Thick streams and large water droplet & Low precipitation rate Triple Blade Wiper Seal precisely balances flushing, flow-by and debris protection to optimize performance and durability at pop-up and retraction. Precision-controlled flushing at pop-up and retraction clears debris, ensuring positive stem retraction in all soil types. Unique debris pockets hold grit in place, removing it from circulation and preventing long-term damage. Parts resistant to corrosion in treated recycled water containing chlorine. Pop spray body shall with stand upto 6.9 bar.Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures
Make : RAINBIRD-RD04-SAM-PRS R VAN 8' - 24'
1
-
-
... More
Supply of 1/2" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series. Make : RAINBIRD /SA
1
-
-
... More
Supply of Imported HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS / XERITECH
1
-
-
... More
VALVES & ACCESSORIES
Supply of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS / XERITECH
3
-
-
... More
Supply of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS / XERITECH
3
-
-
... More
Supply of a double acting air and vaccum release 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAINBIRD / XERITECH
3
-
-
... More
Supply of a double acting air and vaccum release 2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : HT / XERITECH / ARMAS
1
-
-
... More
Supply of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : PIMTAS / XERITECH
7
-
-
... More
Supply of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS / XERITECH
3
-
-
... More
Supply of 12" Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : PIMTAS / XERITECH
2
-
-
... More
Supply of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : RAINBIRD VB
2
-
-
... More
Supply of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
3
-
-
... More
Supply of 3/4th inch Key threads into top of QCV to provide water access etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
1
-
-
... More
Supply of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : XERITECH
1
-
-
... More
FILTRATION UNIT
Supply of 2" Disc Filter with capacity 40m3/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : ARMAS/XERITECH
1
-
-
... More
PUMPING UNIT
Supply of Monobloc or openwell submercible pumpset of having discharge and head of design flow with pressure gauge, UPVC sch 40 - suction & delivery manifold and mounted on a baseframe with proper supports etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : TEXMO/KIRLOSKER/DAVEY
Duty of Pump : 3.50 LPS
Pressure Head Range = 45.00 Mtr
No. of Pumps : 1 Working + 0 Standby
1
-
-
... More
Supply of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL starter (L&T make),start / stop push buttons (L&T make), Ammeter (AE make), Single phase preventor (Minilec make), Voltmeter (AE make) , Indicating lamps (L & T make), MCB (L & T make), Dry level guard sensor (Minilec make) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : L & T/ EQUIVALENT
1
-
-
... More
Supply of Control Cable for Pump Set - 3 core X 4 Sq.mm Copper
Make : Finolex /Polycab
30
-
-
... More
Supply of 2'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS / XERITECH
1
-
-
... More
Supply of 2'' Non Return Valve to prevent back flow have flap type or spring type with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PIMTAS/XERITECH
1
-
-
... More
Supply of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : ARMAS / XERITECH
1
-
-
... More
Automation Equipments
Supply of 14/1 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto -55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strenth 1400PSI for two way communication betwee nsolenoid valvel and decoders complete including suitable conduit pipe etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAINBIRD/PAIGE
900
-
-
... More
Supply of ESPLXME Station Modular Controller UV resistant basic 8 station and expandable upto 48stations (up to 8 Valves ) wall mount case,with LCD display ,non volatile memory for 100years,10KV surge protectionwith removable front panel and programmable under battery in office,and flow watch options to shutdown system if any damage or excess flow or dry run shutdown,cycle+soak,raindelay,station delay ,alarm light ,electronic diagnostic circuit breaker ,program summary and review, Station Priorities, wiring test,,4programm and 8start time per program with adjustable delay between stations,6 languages,slow closing valve, removable battery,and sensor terminals, Power Management and Flow Management ESPseries Flow Problem Shut Down- yes, Reset User Definable Options - No Auto Reenable or Reenable with adjustable timer from 1 minute to 24 hours ,One Number of Flow Sensors optional with FSM Flow Smart Module,PIN Code Protection with IQ Advanced Programming Featurte Pack Software,Flow Settling Time can Adjustable from 3 to 10 minutes, High Flow Reaction Set Point Adjustable in 1% increments from 105% to 200%,Low Flow Reaction Set Point Adjustable in 1% increments from 1% to 95% etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAIN BIRD /ESPLXME
1
-
-
... More
Supply of 1" Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 40GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAINBIRD/PGA
3
-
-
... More
Supply of 1.5" Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 100GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAINBIRD/PGA
3
-
-
... More
Supply of PRS-DIAL to Maintain constant outlet pressure between 1.04 to6.9 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : RAINBIRD PRS
6
-
-
... More
Supply of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : RAINBIRD DBRY
24
-
-
... More
Supply of automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Make : RAINBIRD RSD BEX
1
-
-
... More
Supply of Pump relay 24 AC PLA relay ,stabilizer 300watts etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.
Make : PSA
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%