Goa University Tender
View complete overview of Goa Goa University Tender
Costs
EMD
₹ 59,07,084Document Cost
₹ 30,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GU_16891_1Tender No
GU/9/2024-2025/Engg and Tech Div/140Tender Authority
Goa University ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork in excavation by mechanical means ( hydraulic excavator/manual means in foundation trenches drain ( not exceeding 1.5 m in width or 10 sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.
-
-
-
b. All types of ordinary rock including all types of laterite rock, blasting prohibited.
8867.24
-
-
Extra for additional depth of 1.5 m or part thereof in:
95.04
-
-
c) All types of laterite rocks and hard rocks
-
-
-
Refilling the foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50M and all lifts and disposal of surplus earth as directed by Engineer in charge
6725
-
-
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
-
-
-
b) Moorum
1660.25
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
1424.68
-
-
Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in partitionwalls size of blocks (30 x 20 x 10)
978.84
-
-
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 ( 1cement : 4 coarse sand ) in foundation and basement
1298
-
-
Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)
244.72
-
-
Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer. (The rate is inclusive of all materials & labours).
2052
-
-
Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
80
-
-
Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand) in all sizes in superstructure from floor one level upto floor V level (size of block 30x23x15)
3955.5
-
-
Providing and fixing GI hexagonal chicken wire mesh 22 gauge size at the junction of dissimilar surface of brick/ block masonary wall, RCC column/ beam & electrical conduit area etc. including necessary "U" nails for fixing, overlapping etc. complete as per specification at all heights and as directed by Engineer.
976.65
-
-
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggregate 20mm nominal size ) excluding cost of centering, shuttering and finishing in :
-
-
-
a)all works up to plinth level
636.61
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)
-
-
-
In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
48
-
-
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
-
-
-
A) all works up to plinth level
397.28
-
-
Providing and laying cement concrete1:5:10 (1 cement: coarse sand: 10 graded stone aggregate 40 mm nominal size) all round S.W pipes including bed concrete 15 cm thick as per standard design.
-
-
-
b) 150 mm diameter S.W pipe
1110
-
-
Providing & laying damp proof course 50 mmthick with cement concrete 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg. 20 mm nominalsize).
167.77
-
-
Providing and laying in position machine batched concrete (BMC), machine mixed anmachine vibrated design mix cement concrete ofspecified grade for reinforced cement concretework including pumping of concrete to the siteof laying but excluding the cost of centering ,shuttering, finishing and reinforcementincluding admixtures in recommendedproportions as per IS 9103 to accelerate, retardsetting of concrete, improve workability withoutimpairing the strength and durability as per thedirection of the Engineer-in-charge. M-30 gradeof reinforced cement conrete by using 420 kg ofcement per cu.m. of concrete. All works upto floor V level.
95.23
-
-
Providing and laying in position ready mixed concrete (RMC) with usage of OrdinaryPortland Cement manufactured in fully automatic batching plant and transported to siteof work in transit mixer for a lead upto 10kmshaving continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering,shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-
charge. All works upto floor V level
-
-
-
v)M-30grade of concrete
3147.24
-
-
Extra for carriage of R.M.C. beyond the initial lead of 10 kms. For extra lead of 15 kms.
3147.24
-
-
Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal hoints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)
100.8
-
-
Centering and shuttering including strutting , propping & removal of forms for
-
-
-
I) Foundations, Footings, Bases for columns
950.4
-
-
II)Vertical surfaces such as retaing walls, returnwalls, Partitions, walls (any thickness) includingattached Pilasters, Buttresses, Plinth and stringcourses, Fillets and the like
736.88
-
-
III) Columns , piers, pillars, abutments, posts and struts ( square, rectangle or polygon in plan )
3968.48
-
-
iv) sides / soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels plinth beams not exceeding 1M in depth
9333.59
-
-
XIII) Suspended floors , roof landings, shelves & their supports,chajjas
6507.18
-
-
vi) Staircases ( except spiral staircases) excluding landing
700.79
-
-
xiv) Vertical or horizontal fins individually formingbox louvers or projected bands
3981.12
-
-
Centering & shuttering including Strutting,Propping & removal of forms for sloping orbattering surface (slabs, beams, louvers, etc)including folded plates
-
-
-
(iii) Columns, Pillars, Posts & struts (circular orcurved in plan)
400.98
-
-
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de centering at all levels, over a height of 3.5 m for every additional height of 1m or part thereof ( Plan area to be measured)suspended floors, roofs, landings, beams and balconies( plan area to be measured)
2019.68
-
-
Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG, JSW SteelLtd.)(Confirming to IS 1786 if 1985) for RCCwork including bending, binding & placing inposition in all the floors along with factory made
precaste concrete cover blocks of specified s izeswhose compressive strengthis not less than thatof surrounding concrete in the structuralmember .
356671.7
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab.
-
-
-
a) Jet Black
18.23
-
-
Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
-
-
-
a) Jet Black
347.76
-
-
Providing and fixing Granite stone slabs (mirrorpolished) 18mm thick in risers of steps, skirting,dado and pillars laid on cement paste andjointed with grey cement slurry mixed withpigment to match the shade of the slabs,including rubbing and polishing complete
-
-
-
a) Jet black
126.7
-
-
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete
-
-
-
600x 600 mm Dark Shades
1076.92
-
-
600 x 600 mm light Shades
4307.67
-
-
Crazy ceramic tile flooring (China Mosaic flooring), with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineerin-charge
500
-
-
Providing and fixing Vitrified tiles in different sizes (thickness to be specified bymanufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete
-
-
-
600 x 600 mm - Dark Shades
91.26
-
-
600 x 600 mm - Light Shades
365.04
-
-
Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes ofJohnson, Somany, Kajaria (thickness to bespecified by the manufacturer) and conformingto IS:15622 of approved make in colours andshades as specified laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand) including
grouting the joints with white cement andmatching pigment etc., complete
-
-
-
a 300 x 300 mm Design - Liner
225.9
-
-
b 300 x 300 mm Design - Buttons
34.56
-
-
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria) conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
(C)Wall Ceramic Glazed Tiles : 300 x 600
2607.02
-
-
Providing and fixing vitrified antiskid tiles (320 x 320) and 10mm thick tiles in floor, treads of steps, landings on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete
288.66
-
-
Rounding of edges of kotah /granite slab to semi circular slope
2390.75
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm
-
-
-
(a)Jet Black
957.48
-
-
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
86.25
-
-
Providing and and laying Kotah stone slab flooring over 20 mm (average)thick base laid over & jointed with grey cementslurry mixed with pigment to match the shade ofthe slab including rubbing & complete with baseof cement mortar 1:4 (1 cement : 4 coarse sand)
-
-
-
a) 20 mm thick.
80
-
-
Providing and fixing 18 mm thick gang saw cut approved quality, any colour/shade pre-polished mirror finish granite stone slab in Skirting , Riser, Dado, Jambs & lintel, sides and backrest of benches and pillars as per architectural drawings (using single length upto 2.0 mt.) at all levels on 12 mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and joined with grey cement slurry @ 6.4 kg/Sqm, filling joints with white cement mixed with matching coloured pigment to match shade of the slab including rubbing and polishing, curing etc. complete. a) Jet Black
192.04
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.
-
-
-
c) first class matti wood
15.35
-
-
Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
540.51
-
-
Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors,windows and clerestory window includinganodized aluminium butt hinges with necessaryscrews:
-
-
-
a) Second class Indian teak wood
46.8
-
-
Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
195.96
-
-
Extra if louvers not exceeding 0.2 sq.m. are provided in flush door shutters. (N.B. : Second class indian teakwood louvers to be provided) - Decorative type door. Unit: SQ.M. door area.
86.56
-
-
Extra for providing vision panel not exceeding 0.1 sq.m. in all types of flush doors (cost of glass excluded)
-
-
-
a Rectangular or square Unit: SQ.M. door area
20
-
-
Providing & fixing Pressed steel door frames manufactured from galvanised steel sheet (confirming to IS 277) formed to single/ double rebate profile with bending radius of 1.4 mm as per drawing with/ without ventilators incl. fixing four anchor fasteners on each vertical jamb & providing concrete bedblock for fixing the anchor fastener including filling cement mortar 1:6 in hollow core, 3 mm thick base plates to receive hardware items, 3 mm thick hinge back plates predrilled to receive hinges to receive screw mounting fixing & bolted with top jamb with 1 coat of zinc phosphate stoving primer & finishing with two or more coats of Thermosetting polyurethane paint etc. complete as per approved shop drawings and schedule and as directed by theEngineer. All hardware shall be of SS material as approved by Engineer. (All hardware shall be paid separately under relevant item). The Rate shall include preparation of fabrication/shop drawing , mock-up etc.
-
-
-
1.6 mm thick (16 gauge) nominal thick Galvanised steel sheets with double rebate profile of size 125 mm x 55 mm
33
-
-
Providing & fixing two hours rated fireproof doors of 46mm thick flush steel single/ double shutters, finished with 1 coat of zinc phosphate stoving primer & two or more coats of Thermosetting Polyurethane paint of approved colour & shade, etc. as per approved shop drawings and schedule and to the satisfaction of Engineer. (Hardware to be paid for separately) . a) Proprietary Fire Rated Shutters shall be constructed out of 0.8 mm nominal thick galvanised steel sheets confirming to IS 277, having 120 GSM zinc coating, formed to provide 46 mm nominal thick fully flushed double skin door shutter with no visible screws, rivets or welds on either faces. b) Internal reinforcements are to be provided at top, bottom and stile edges for fire rating.
-
-
-
c) The infill material shall be resin bonded honeycomb craft paper suitable for stability and integrity upto two hours fire rating. d) Shutters shall have predrilled hinge back plates to receive screw mounted hinges and pre punched cut outs to receive iron mongery items as per schedule. e) In case vision panel is required to be provided, suitable cut out in shutter with raised box bidding made of galvanised steel sheet finished in same colour as the door shutter shall be provided. (Vision panel to be paid for separately). f) Shutters have 18mm x 3mm shielded intumescent strip on the three edges except the bottom. g) Shutters are fabricated in factory as per BS 476 Part 20 & 22 & IS 3614 Part 2.
15.48
-
-
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter:
Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
168.96
-
-
Accessories:
-
-
-
i) S. S. Hinges 4” - 3 Nos
-
-
-
ii) S. S. Latch - 1 No
-
-
-
iii) Tower Bolt 5” - 2 Nos
-
-
-
iv) Handle 5” - 2 Nos
-
-
-
Shutter Thickness b) 35mm
-
-
-
Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete
208
-
-
Providing & fixing SS sliding door bolt with bolts, nuts and screws etc. complete ( ISI mark, Heavy )
-
-
-
b) 250 x 16 mm
183
-
-
Providing and fixing Surface Mounted Tower Bolts 12" in Satin Stainless Steel Finish of grade 304 complete in all respects with necessary fixing hardware, of approved make & approved sample
220
-
-
Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
405
-
-
Providing and fixing Mortise Shaft Lock with Allen Key in Satin Stainless Steel Finish of grade 304 complete in all respects with necessary fixing hardware, of approved make & approved sample
38
-
-
Providing and fixing Fire Rated - Rack and pinion door closer EN size 2-4, with standard arm and with two independent closing valves and latching speed adjustable by arm. All adjustment screws face fixed. As per EN 1154. in Satin Stainless Steel Finish of grade 304 complete in all respects with necessary fixing hardware, of approved make & approved sample
5
-
-
Providing and fixing Grab Bar of Length 300mm, 25mm Diameter, in Satin Stainless Steel Finish of grade 304 complete in all respects with necessary fixing hardware, of approved make & approved sample
24
-
-
Providing and fixing Kick Plate - 300 mm high, thickness 0.9 mm, max. door width 1000mm, with smoothened edges and rounded corners, flush face fixing screws, in Satin Stainless Steel Finish of grade 304 complete in all respects with necessary fixing hardware, of approved make & approved sample
47
-
-
Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc.
-
-
-
a) 50 x 12 mm
1204.94
-
-
Providing and fixing brass hydraulic door closer of make Everest/ universal/ Godrej with necessary screws and fittings complete.
208
-
-
Providing flat iron hold fast 40 cm including fixing to frame with 10mm dia bolts , nuts and wooden plugs and embedded in cement concrete blocks 30 x 10 x 15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size
-
-
-
b) 40 x3 mm flat iron hold fast, 15 cm long
1552
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, platesetc.with hairline finish, including welding,grinding, buffing, polishing and makingcurvature (wherever required) and fitting thesame with necessary stainless steel nuts andbolts complete, i/c fixing the railing withnecessary accessories & stainless steel dashfasteners, stainless steel bolts etc., of requiredsize, on the top of the floor or the side of waistslab with suitable arrangement as per approvalof Engineer, ( for payment purpose only weightof stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts,fasteners etc.).
5164.16
-
-
Providing and fixing M.S grill of required pattern in wooden frames of windows etc with M.S flats square or round bars with round headed bolts and nuts or by screws.
-
-
-
a) Plain grill
7161.36
-
-
Making holes in RCC structure i.e. slabs, beams and columns by core cutting upto required depth & size up to 5" dia
50
-
-
Providing and fixing Aluminium shutters (Jindal make), 40mm series double openable shutters as per design including transportation, scaffolding and handling etc, complete. Windows with openable double shutters with outer frame 39 mm x 40 mm and shutters 54 mm x 40 mm with aluminium cleating system on SS 304 friction stay hinges, fixed mullion, single point locking, fixing screws of HILTI make with GP silicon.
77.76
-
-
Providing and fixing Aluminium shutters (Jindal make), 27mm-Domal series windows aluminium cleating system as per design including transportation, scaffolding and handling etc, complete. Windows with 3 track ,2 sliding shutters ,1SS net shutter with outer frame 100.6mm x 45mm and shutters 65mm x 27mm kinlong touch lock, epdm gasket, all screws of S.S 304 grade fixing screws of HILTI make
complete with G.P Silicon with 5mm clear annealed glass
515.75
-
-
Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
593.51
-
-
Providing and fixing 8mm Aluminium grill for AC duct with aluminium back up frame section of 63 x38 mm as per grill design with gap of 80mm including powder coating, etc.complete
199.8
-
-
Providing and fixing 5mm thick bajri glass for louvered windows complete as per the architectural drawings and the directions of the Engineer-in-charge. Glass sample to be approved by the Engineer-in-charge.
15
-
-
Providing and fixing 2 hours fire rated clear glass vision panel of size 300 x 300 mm, of approved make for fixed glazed window and Fire resistant doors using 6 mm thick clear Pyran S glass including providing necessary bidding, gaskets for fixing the glass etc. as per approved shop drawings and schedule and to the satisfaction of Engineer.
7
-
-
12mm cement plaster 1:4 ( 1 cement : 4 coarse sand )
22296.42
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1;5 ( 1cement : 5 coarse sand ) and top layer 6 mm thick with cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with sponge
15765.04
-
-
Extra for plastering done on mouldings, cornices, or arches including neat finish to line and level
-
-
-
a) In one coat
459.48
-
-
6mm cement plaster to ceiling 1:3 ( 1cement : 3 fine sand)
12326.14
-
-
18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) 1 meter long, 1 cm wide
1956
-
-
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.
34622.56
-
-
Extra for providing and mixing water proofing material proportion recommended by the manufacturers
-
-
-
a) 12mm cement plaster 1:3 ( 1cement: 3 sand)
15765.04
-
-
Applying priming coat with ready mixed primer of approved brand and manufacture on WOOD WORK complete
940.87
-
-
Painting two or more coats (excluding priming coat ) with superior quality ready mixed paint(satin finish) for WOOD WORK of approved brand & manufacture in all shades on NEW WORK to give an even shade
940.87
-
-
Painting three or more coats with acrylic exterior paint of approved brand and manufacture ( such as weather shield, Apex) including applying one coat of cement primer and one coat of surface treatment etc. complete
15765.04
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
34622.56
-
-
Wall painting ( two or more coats) with plastic emulsion paint of approved brand and manufacture including a priming coat on NEW WORK to give an even shade
34622.56
-
-
Providing waterproofing treatment over the RCC roof terraces by speading cement slurry over the RCC slab and laying of 10 cms, average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered terraces and balconies with damp proof of jointless water proofing plaster of mix 1:3 (1 cement :3 fine sand), finished smooth with wooden trowel with false markings of 30cm square.The vertical surface of the adjoining walls are to be treated up to a height of 30 cms including rounding of junction(the rate includes for complete items including labour and materials and including bcost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when necessary for filling honey combs ,cracks etc in the RCC slabs) NOTE: cement consumption 25 Kg/ sq.m
1842.11
-
-
Providing and filling in the sunken slabs with C.M 1:4 . Broken laterite soling stones to be laid in layers with mortar and top layer of I.P.S finish (1:2:3) over brickbat coba filling etc complete in all floors.
137.76
-
-
Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) 1st layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.ii)2nd layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 3rd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.
100
-
-
Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.
125
-
-
Neat cement punning
822
-
-
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised)including adopting precautions for healthhazards and safety measures as required therein with the cost of all materials, chemicals, plants,equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.
-
-
-
a)Pre-construction
2614.98
-
-
Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 25 mm thick.
59.9
-
-
Constructing electrical manholes of following clear internal sizes in 230mm thick brick masonry, in 1:5 cement sand mortar, 100 mm thick 1:2:4 PCC coping to fix the frame & 1:2:4 PCC 150mm thick bedding, 1:3 water proof cement plaster smooth inside & rough outside including supply of all materials for chamber, including precast SFRC heavy duty manhole cover & frame complete as directed by Engineer.
-
-
-
450 X 450 X 450 mm Deep
12
-
-
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit upto 0.5m depth (from bottom up)with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.)including netlon mesh between each gravel/ fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.)media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge
3
-
-
RWH - Recharge Pit
Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC endcaps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
be of approved make. All works complete as per the drawing, technical
specification and direction of the Engineer in charge
3
-
-
Boring/ drilling borewell of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (partI), including collecting samples from different strata, preparing and submitting stratachart/ borelog, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.
540
-
-
Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.
360
-
-
Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.
180
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer- in-charge.
1
-
-
Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
1
-
-
Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.)of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.
1
-
-
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel: fine/medium/coarse, in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge.
30
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
50887.08
-
-
Steel work welded ( SAIL, TATA, VIZAG & using electrodes of AdOr make only) in built up sections trusses and framed work including cutting, hoisting, fixing in position with anchor fasteners ( Hilti HST) and applying zinc chromite primer
-
-
-
b) In tees, angles ,flats and channels as per the design
20
-
-
Providing and fixing colour coated galvuliumroofing sheets of 0.5mm thickness (150 GSM) including allthe accessories (TATA blue scope/ JSW make) but excluding the cost of purlins, rafters, trusses, flashings etc.complete as per the directions of the Engineer incharge.
4240.59
-
-
Providing and fixing colour coated Galvulium Flashings of 0.5 mm thickness (150 GSM) ( TATA / JSW Make) in - corners,ridges,valleys, gable end and trims Girth up to 610 mm including all the accessories complete as per the directions of the Engineer in Charge.
1069.88
-
-
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. of makes ASTRAL/ASHIRWAD
-
-
-
20 mm dia nominal outer dia pipes.
1112
-
-
25 mm dia nominal outer dia pipes.
1070
-
-
32 mm dia nominal outer dia pipes.
458
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).
-
-
-
20 mm outer dia CPVC pipe
63.26
-
-
25 mm outer dia CPVC pipe
264
-
-
32 mm outer dia CPVC pipe
216
-
-
40 mm outer dia CPVC pipe
200
-
-
50 mm outer dia CPVC pipe
220
-
-
Providing and fixing ASTM UPVC pipe,conforming to ASTM 2467 with ISO 14001,including all UPVC plain & brass threadedfittings, including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes &fittings with one step UPVC solvent cement andtesting of joints complete as per direction of Engineer. Internal work - Exposed on wall.
-
-
-
I SCH-80(blue)/(white)
-
-
-
20mm outer dia
144.62
-
-
25mm outer dia.
325
-
-
32mm outer dia.
120
-
-
40mm outer dia.
120
-
-
50mm outer dia.
180
-
-
Providing and fixing ASTM UPVC pipe,conforming to ASTM 2467 with ISO 14001,including all UPVC plain & brass threadedfittings, including jointing of pipes & fittings withone step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work.
-
-
-
I SCH-80(blue)/(white)
-
-
-
25mm outer dia.
150
-
-
32mm outer dia.
244
-
-
40mm outer dia.
400
-
-
50mm outer dia.
920
-
-
63mm outer dia.
240
-
-
75mm outer dia.
400
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
a) 110 mm dia
800
-
-
b) 75 mm dia
400
-
-
Providing and fixing single Tee of rigid PVC(approved make ) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
a) 110 mm dia
160
-
-
b) 75mm dia
160
-
-
Providing and fixing single “Y”of rigid PVC S.W.R pipes (soil, waste & rain water drainage pipes of approved make including lubricant etc. complete ,with door
-
-
-
a) 110 mm dia
160
-
-
b) 75 mm dia
160
-
-
Providing and fixing rigid PVC bend ( approved make) for SWR pipes including lubricating etc complete, with door
-
-
-
a) 110 mm dia
160
-
-
b) 75mm dia
160
-
-
Providing and fixing double “Y”of rigid PVC S.W.R pipes (soil, waste & rain water drainage pipes of approved make including lubricant etc. complete ,with door
-
-
-
a) 110 mm dia
160
-
-
b) 75 mm dia
160
-
-
Providing and fixing R.P.V.C vent cowl
-
-
-
a) 110 mm dia
40
-
-
b) 75 mm dia
12
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :
-
-
-
b) 150 x 100 mm size –P or S type
32
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 40mm nominal size )inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) neatly finished complete as per standard design.
-
-
-
b) Inside size 90 x 80 cm and 60 cm deep including C.I cover with frame ( light duty ) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg)
40
-
-
d) Inside size 60 x 60 cm and 60cm deep including C.I cover with frame (light duty ) 455 x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 Kg)
35
-
-
Extra for depth for manholes : a) size 90 x 80 cm
10
-
-
Providing and fixing NICKEL chrome platedcopper alloy Fancy BIB Cock Short Body Jaquarmake or equivalent. Confirming to IS 8931;1993
-
-
-
a)15mm nominal bore
24
-
-
Providing and fixing Nickel chrome plated copper alloy BIB cock (long body) JAQUAR make with wall flange or ARK SUPREME confirming to IS 8931; 1993
-
-
-
a) 15 mm nominal bore
60
-
-
Providing and fixing NICKEL chrome platedcopper alloy Fancy two way long body bib cockwith wall flance Jaquar make or ARK supremeConfirming to IS 8931;1993
-
-
-
a) 15 mm nominal bore
65
-
-
Providing and fixing C.P concealed angle stop cock (heavy) with wall flange of (ARK SUPREME/JAQUAR) make 15 mm nominal bore
65
-
-
Proving and fixing white vitreous china watercloset squatting pan (Indian type w.c. pan) size580 mm with 100 mm sand cast iron P. or S trap10 litres high level P.V.C. flushing cister (ofapproved make) with fittings, rack bolts 32 mmdiameter P.V.C telescopic flush pipe with fittings and clamps 25mm P.V.C. over flow pipe
with specials & mosquito proof coupling ofapproved municipal design and nylon pullcomplete cutting and making good the walls andfloors where required(HINDUSTAN/CERA)
-
-
-
b) Orissa pattern W.C. pan
24
-
-
Providing and fixing vitreous China water closet squatting (European type W.C pan) with seat and lid C.P brass hinges and rubber buffers 10 lts high level PVC flushing cistern ( of cera conventional “s” /p trap) with fittings rack bolts, 32 mm, dia PVC telescopic flush pipe with fittings and clamps 25 mm PVC over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon chain and pull complete, cutting & making good the walls & floors where required. ( HINDUSTAN/CERA)
-
-
-
a) WC pan – Hindustan /Cera conventional EWC of white colour with white plastic lid & seat.
-
-
-
b) PVC FLUSHING CISTERN ( HINDUSTAN/CERA)
-
-
-
White colour Hindustan sleek with all fittings.
42
-
-
Providing and fixing vitreous china under counter wash basin inclusive of all fixing accessories and Jaquar make fittings etc. complete. -JAQ ALD-CHR-709 L130 coupling -JAQ ALE-CHR-773 ML190X125 bottle trap -JAQ-PRS-CHR-031 Pillar Cock auto closing system-18’’ connection pipe of ARK make a) White colour under counter rectangular wash basin of size 485 x 370 x 205 mm.Jaquar make.
53
-
-
Providing and fixing vitreous china wall hung wash basin inclusive of all fixing accessories and Jaquar make fittings etc.complete.
-JAQ ALD-CHR-709 L130 coupling
-JAQ ALE-CHR-773 ML190X125 bottle trap
-JAQ-PRS-CHR-031 Pillar Cock auto closing system
-18’’ connection pipe of ARK make
a) White colour wall hung rectangular wash basin of size 420 x 420 x 155 mm.
Jaquar make.
12
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete
-
-
-
(a)Overall size 1040mmx510mm (41"x20") bowl size 460mmx410mmx200mm (18"x 16"x 8") depth 200 mm. Glossy. 1.0mm thk,
12
-
-
Providing & fixing bevelled edge mirror ofsuperior glass (5mm thk) of approved Quality,shape & size complete with CP brass screws andwashers, Cleats, CP studs etc Complete.
53.28
-
-
Providing and fixing C.P jali (Round)
136
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :
-
-
-
a) 110 mm dia
136
-
-
Providing & fixing CP brass towel rail fixed in wooden cleats with CP brass screws
-
-
-
a) 24” size CAN- CHR- 1111SM, Jaquar make
108
-
-
Making connection of G.I distribution branch with main 50mm to 80mm nominal bore by providing and fixing tee including treading the pipe etc complete.
5
-
-
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:
-
-
-
c) 18” (45 cm) length (ARK make)
60
-
-
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality. ZOLOTO make/ARK supreme
-
-
-
b) 20 mm nominal bore
4
-
-
c) 25 mm nominal bore
6
-
-
d) 32 mm nominal bore
2
-
-
e) 40 mm nominal bore
4
-
-
f) 50 mm nominal bore
4
-
-
g) 65 mm nominal bore
4
-
-
Providing and fixing high density polyethylene water storage tank with cover conforming lo ISI :12701, colour of opaque white or as approved by Engineer-in-charge' The rate includes making rlecessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.
-
-
-
Tank 1 (5000 ltr capacity)
8
-
-
Providing and placing on terrace roof of floor two (1st floor roof) single piece rotational moulded polythene water storage tank having ISI mark and confirming to IS 12701; 1996 including tank connectors.
-
-
-
b) 500 lit. capacity
4
-
-
c) 1000 lit capacity
4
-
-
Jointing of rigid / SEL FIT PVC pipes by cleaning the pipe with solvent cement including the cost of solvent cement and hydraulic testing of joints etc. complete as per IS:7634-1975 Part 3, including hydraulic testing of joints as directed by the Engineer in-charge.
-
-
-
Outer dia in mm
-
-
-
63 mm
14
-
-
90 mm
20
-
-
110mm
80
-
-
160 mm
206
-
-
Conveying carefully from stack at site, 250mm from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for PVC/HDPE complete in all respects as per the direction of the Engineer-in-Charge
-
-
-
63 mm OD
80
-
-
90 mm OD
100
-
-
110mm OD
300
-
-
160mm OD
580
-
-
Supplying at store or site of work Rigid PVC (SEL FIT) pipes for public water supply including
Railway freight, carting, loading and unloading, stacking, transit insurance etc. complete,
Conforming to IS: 4985-2000, and bearing ISI mark, Class 6 kg/cm2.
-
-
-
Outer Dia in mm
-
-
-
110mm
300
-
-
160mm
480
-
-
Supplying at store or site of work Rigid PVC (SEL FIT)pipes for public water supply including Railway freight,carting, loading and unloading, stackig, transit insuranceetc. complete, Conforming to IS: 4985-2000, and bearing ISI mark, Class 10 kg/cm2.
-
-
-
Outer Dia in mm
-
-
-
63 mm
80
-
-
90 mm
100
-
-
160 mm
100
-
-
Supplying and fixing at the site of work of Steel FibreReinforced Concrete (SFRC) manhole covers withframes made as per IS :12592 (part I and II )- 1991 inconcrete M45grade. The covers and lapped in 2mmthick. steel plate and this plate & lifting hooks are dulypainted in corrosion resistant epoxy paint etc. complete.
-
-
-
I Light Duty ( 2.50 Metric Tonne Capacity)
-
-
-
Size in mm
-
-
-
a 300x300
10
-
-
c 450x600
10
-
-
d 450x900
10
-
-
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I
-
-
-
d)150mm
2
-
-
Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts, as directed by the Engineer in-charge.
-
-
-
d)150 mm
2
-
-
Providing and fixing at the site of work orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar conforming to IS:1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 in Cement Concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate. 20 mm nominal Size) complete as per standard design.
212
-
-
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast iron double flanged manually operated Sluice Valve, generally conforming to IS:14846 - 2000, having body, door, dome, wedge in graded cast iron to IS:210 Gr. FG 200 min., four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI410, spindle, flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc. complete TYPE P.N. 1.6 (Class A )
-
-
-
F) 150
2
-
-
Providing & fixing soap dish chromium plated fixed to wooden cleats with CP brass screws.
-
-
-
a) Soap dish, JAQUAR make
113
-
-
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.( Jaquar or ARK supreme)
60
-
-
Providing and fixing CP Brass toilet paper holder fixed to wooden cleats with CP brass screws
a) JAQUAR make(CHR-1151N)
60
-
-
Providing and fixing urinal valve auto closing system CP with built in control cock with 8 mm dia 300 mm long pipe, wall flange etc. complete.
JACQUAR make (PRS-CHR-077)
6
-
-
Providing and fixing WHITE vitreous china flat back lipped front Urinal basin of JAQUAR Make inclusive of C.P waste coupling, dome shaped, Urinal spreader, Urinal bracket ( Cat no :URS-WHT-13257)
6
-
-
Supplying & Fixing Brass C.P. robe hook twin type
108
-
-
Providing and fixing C. P. brass waste for wash basins and sink
-
-
-
32 mm dia
64
-
-
40 mm dia.
13
-
-
Supplying & Fixing 450 mm Grab Bar for Toilet for Differently Abled
12
-
-
Providing and fixing C.P. Angular stop clock with wall flange including necessary sockets/union nut etc.complete.
64
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993
60
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: 100mm dia
60
-
-
Supplying & erecting D.O.L Starter suitable for 250 V, Single phase 50 cycles with overload element with necessary materials and connected to supply up to 3 H.P.
24
-
-
Supplying & erecting Fully Automatic Star/delta starter suitable for 12.5 H.P to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame
4
-
-
Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only
8
-
-
Supplying & erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)
8
-
-
Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C.supply of 1.125 KW/1.5 H.P., With discharge of 480 to 31 LPM for 10 to 50 Mtr Head & 25 mm suction/ 25 mm delivery pipe, for Domestic Pressure boosting applications.
4
-
-
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
20
-
-
Providing and fixing electronic type level indicator for water tanks mounting in panel with level display, alarm (level low or high), and manual reset for alarm, potential free set point contacts etc. complete with electrical wiring to probes and all accessories complete the work. Provision to connect to the building Automation system or pump controller through a suitable port.
8
-
-
Providing adhesive thermal insulation for hot water pipeline with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2017
660
-
-
Installation, Testing and Commisioning of adhesive thermal insulation for hot water pipeline with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2017
660
-
-
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system/Hot water pipeline.
705.26
-
-
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system/Hot water pipeline.
830
-
-
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater/AC system/Hot water pipeline.
224
-
-
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. NP3 Class (Dia in mm)
-
-
-
100 mm
25
-
-
150 mm
25
-
-
250mm
50
-
-
300 mm
12
-
-
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.
-
-
-
Nominal diameter in mm
-
-
-
100mm
25
-
-
150 mm
25
-
-
250mm
50
-
-
300mm
12
-
-
Providing and laying cement concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size upto haunches of s.w. pipes including bed concrete 15cm thick as per standard design :
-
-
-
100 mm diameter S.W. pipe.
350
-
-
150 mm diameter S.W. pipe
350
-
-
Construction of grease trap brick masonry chamber 150x90x130 cm with brick work of class designation 40kg/sq. cm of 23 cms wall thickness & half brick baffle walls in cement mortar 1:5 (1cement : 5coarse sand)with necessary excavation in foundation rubble soling, PCC in foundation of 15 & 10 cm thick respectively benching,haunching , in cement concrete concrete 1:2:4 (1 cement :2 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and external plaster of 18 mm cement plaster in two coats under layer 12 mm thickcement plaster 1 : 5 (1 cement :5 coarse sand) and top layer 6mm thick in cement plaster 1:3 (1 cement :3 coarse sand) and SS removable bar screen all other materials and labour as per details drawing)
2
-
-
Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials.fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete. with 10mm-12mm thick plate
-
-
-
Tees, bends, reducers,
200
-
-
Supplying at store/site of work including railway freight, carting, loading, unloading, stacking etc. galvanized mild steel continuous weld tubes conforming to IS 1239 (part I) 1975, with latest amendments screwed at both the ends as per IS : 554 - pipe threads, one and fitted with socket other end with plastic protection ring at random lengths 4 - 7 meters. class C (Nominal Diameter in mm)
-
-
-
40mm
12
-
-
50mm
12
-
-
65 mm
12
-
-
80 mm
12
-
-
100 mm
12
-
-
150 mm
8
-
-
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve(fig S2 confirming to IS 14848/2000 with suitable connections as directed by Engineer -In- Charge for working pressure of 10kg/sq.cm. (Class B)
-
-
-
25mm
24
-
-
Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20mm and 10kg/sq. cm for 25mm to 50mm, complete, as directed by the Engineer in-charge, of following sizes.
-
-
-
25mm
24
-
-
Supplying Cast Steel Reflux valves conforming IS:5312 part-I. Valves double flanged ends without bypass arrangement bearing ISI Certificate mark Class-150 (20/30 kg/cm2) (Class B)
-
-
-
50mm
12
-
-
Installation, Testing and Commisioning of Cast Steel Reflux valves conforming IS:5312 part-I. Valves double flanged ends without bypass arrangement bearing ISI Certificate mark Class-150 (20/30 kg/cm2) (Class B)
-
-
-
50mm
12
-
-
Supplying, Installation, Testing and Commisioning Cast Steel Reflux valves conforming IS:5312 part-I. Valves double flanged ends without bypass arrangement bearing ISI Certificate mark Class-150 (20/30 kg/cm2) (Class B)
-
-
-
25mm
32
-
-
32mm
16
-
-
Providing and fixing in position Forged brass float valve with PVC ball float and brass rods of required length suitable for test pressure of 12 kg/sq.cm. : 50 mm nominal bore
8
-
-
Providing and fixing brass stop cock (heavy) of approved quality :(zoloto/ARK make)
-
-
-
20 mm nominal bore
56
-
-
25 mm nominal bore .
112
-
-
32 mm nominal bore
60
-
-
40 mm nominal bore
20
-
-
Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
70
-
-
Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
44
-
-
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
6
-
-
Supplying, installing, testing and commissioning C.I. “Y” strainer (screwed / flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flanged / unions nuts, bolts and washers complete as required.
-
-
-
65 mm
16
-
-
25 mm
8
-
-
Providing and laying of Hot Dip Galvanising surface coating for MS pipe, plates, flanges ,Nut bolts etc accessories as required,. The Hot dip Galvanised shall be applied after removing the scales and rust over the pipe by wire brush. Hot dip Galvanised shall be applied uniformly to achieve uniform coating of minimum DFT of 150 microns over MS pipe ,plates, flanges ,nut bolts etc accessories as required, confirming as par IS standards 4739.
200
-
-
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
21
-
-
Applying one or more coat of Zinc epoxy primer on steel work of approved brand & Manufacture (Asian/berger) on New work to give an even shade
3000
-
-
Painting two or more coats (excluding priming coat) of Epoxy Paint for Steel Work of approved brand (Asian/Berger) on New work to give an even shade.
3000
-
-
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.
b) 60mm thick in grey colour (M35 Grade)
3039.51
-
-
Providing and fixing in position Terracotta Jali, of size 200x200x75mm, with cement and matching colour pigment, cleaning of complete surface, levelled joint edges, with proper line, level, finish, at all heights in the opening at all levels including necessary scaffolding, tools, & plants, etc. complete as approved by engineer-in-charge.
240
-
-
Sealing of expansion joints by using expansion joint waterproofing tape system i/c scaffolding,tools & plants etc complete as directed by the method mentioned in the tender including:-
-
-
-
Cleaning of concrete surface on both side of the expansion joint to remove any dust, oil, grease including removal of laitance and cleaning the inside of the expansion joint with compressed air.
400
-
-
Repairing edges of the joint(in case of weak concrete at the joint edge) and also configuring the joint width (in case of expansion joint with irregular width more then the width of the expansion joint waterproofing tape system )with appropriate epoxy repair mortor.
400
-
-
Supply and apply an epoxy based membrane adhesive base coat.
Consumption: 0.5 kg/m (strip width 150 mm)
Consumption: 0.7 kg/m (strip width 200 mm)
Consumption: 1.0 kg/m (strip width 300 mm)
Product requirements:- mixed density:1.75 kg/ltr, Bond strength 1.5N/mm2
400
-
-
Supply and apply a flexible FPO based membrane. product requirements:Chemical Base Modified Flexible Polyolefin (FPO) with advanced adhesion Fire Rating Euro class E (EN ISO 11925-2, classification to EN 13501-1) Service Temperature -30 °C min. to + 40°C max. in wet conditions -30 °C min. to + 60°C in dry conditions Mechanical/physical properties Tensile strength 12 N/mm2 (EN 12311 - 2) Tear strength 40 N /mm (ISO 34-B) Elongation at Break 600 % (EN 12311 - 2) Seam strength 300 N / 5cm (2mm) (EN 12316 - 2) 400 N / 5cm (2mm) (EN 12317 - 2) Behavior under hydrostatic pressure 6 bar/72h No leakage (EN 1928-B) Resistance: Chemical Resistance . Thermal Resistance Thermal ageing: Passed (SIA V280, 1996) Bonding test: No cracks at -40°C (EN 495-5) Artificial weathering: 7500h passed (SIA V280,1996)
400
-
-
Supply and apply an epoxy based protective top coat for membrane. Consumption: 0.5 kg/m (strip width 150 mm)
Consumption: 0.7 kg/m (strip width 200 mm)
Consumption: 1.0 kg/m (strip width 300 mm)
Product requirements:- mixed density:1.75 kg/ltr, Bond strength 1.5N/mm2
400
-
-
Providing and fixing of expansion joint system related with wall joint (internal/external)location as per drawings and direction of Engineer-In-Charge.The joints shall be of extruded aluminium base members 150mm width and 3mm thick, self-aligning / cantering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joint system suitable for vertical wall to wall/ wall and floor area to corner application, both new and existing construction in office buildings & complexes with no slipping down tendency amongst the components of the joint system. The Joint sysrtem shall utilize lightweight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm top ASTM 6063) i/c scaffolding, tools, & plants etc complete as directed by engineer incharge.
112
-
-
Providing and fixing of anodized aluminium cover strip of 150 mm width and 3 mm thick for horizontal expansion joint of approved make and manufactures for slab to slab ( internal and external) ceiling locations as per drawings and direction of engineer incharge . The cover strip shall be designed of width and thickness with wired to satisfy movement and loading requirements and secured to based members , including necessary aluminium clips, fastenining accessorries, cleaning agents, adhesive ,etc. Strip colour as approved by engineer incharge, including cleaning of complete surface, inside of the expansion joint, repairing the edges of the joint wherever necessary, etc . to proper line, level, finish, colour, concrete
240
-
-
Construction of embankement with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300-2 as per MORTH specification 305
2310
-
-
Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .
616
-
-
Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m.bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.
2500
-
-
Providing and laying bituminous macadam with 40 60 TPH hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder to the specified percentage of total mix , transported to site, with all leads laid over a previously prepared surface with sensor paver finisher to the required grade, level and alignment and rolled with smoth wheeled roller and vibratory roller to achieve the desired compaction, using antistripping agent complete as per MoRT&H Specifications Clause 504. Grade -II (19mm nominal size)@4% of Bitumen-mix
-
-
-
Antistripping agent @ 0.5% of bitumen content
125
-
-
Providing and laying 30 mm thick Bituminious/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified gradings Premixed with bituminious binder at 6.0 % by weight of total mix and filler incl. Providing Antistripping agent.@ 0.50% of bitumen content of, transpoting the hotmix to work site with all leads and applying a tack coat @f 2.00 kg/10sq.m. with hot bitumen of 80/100 and laying with hydrostatic/hydraulic power finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction as per MORT&H specifications clause 509 and 503
-
-
-
a) Antistripping agent @ 0.5% of bitumen content
2500
-
-
Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503.
-
-
-
Bitumen 80/100@ 0.375 kg/sq.m
2500
-
-
Raising side shoulders with hard murrum including spreading watering and consolidation
-
-
-
using murrum from cut spoils
300
-
-
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803
225
-
-
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints, etc. complete
b) 250mm dia RCC pipe
54.71
-
-
1. Drilling & Commisioning of New Borewell near girls Hostel Goa University including the following specification.
a) Mobilization of Bore well drilling rig on site.
b) Water driving of Survey for underground water strata and selecting in suitable site.
c) 200 mm diameter drilling of trial through any type of strata including hard rock by DTH drilling.
d) Providing and fixing of 150mm dia GI “B” Class APOLLO casing pipe.
e) 150mm dia drilling of hard strata up to the water level.
f) Development of bore well by using air compressor, clean water yield testing.
g) Supply and fixing of well cap suitable for 165 mm dia.
h) Supply and installation of 3-phase, 3HP, KSB Make 100 mm dia Stainless Steel submersible pump set.
i) Supply and fixing of 2.5 mm submersible flat cable of ISI Finolex or KSB make of required length from bore well.
j) Supply and fixing of 3HP submersible pump controlpanel board with L&T make.
k) Supply and fixing of 50 mm OD, 40 mm ID dia HDPE Hose delivery pipe of required length.
l) Supply and fixing of 40 mm dia pipe S.S adapters.
m) Supply and fixing of 40 mm dia, GI Bends and necessary clamp supports.
6
-
-
MAIN PANEL - AS PER SLD AND SPECS Supply, Installation, Testing & Commissioning of MAIN PANEL - floor mounted with frame of suitable M.S. channel dully painted, fabricated of CRCA sheets completely derusted , chemically treated and powder coated with shade suggested by client and having items as per SLD and Specs.
1
-
-
INCOMER
-
-
-
400A 4P MCCB MP LSIG 36KA Raw Power EB incomer
-
-
-
400A 4P MCCB MP LSIG 36KA Raw Power DG Incomer
-
-
-
400A 4P ATS
-
-
-
MFM with LED indication Lamp
-
-
-
BUS BAR
-
-
-
400A 4P 36KA-1 SEC, 415V 3 PHASE,50 Hz, PVC SLEEVED AL busbar
-
-
-
OUTGOING
-
-
-
1 Nos. 160 A 25 KA,4P TM MCCB with LED indication Lamp
-
-
-
1 Nos. 250 A 25 KA,4P TM MCCB with LED indication Lamp
-
-
-
6 Nos. 63 A 10 KA,4P MCB with LED indication Lamp
-
-
-
8 Nos. 40 A 10 KA,4P MCB with LED indication Lamp
-
-
-
4 Nos. 16 A 10 KA,4P MCB with LED indication Lamp
-
-
-
International Hostel Panel- as per SLD and Specs. Supply, Installation, Testing & Commissioning of MAIN PANEL - floor mounted with frame of suitable M.S. channel dully painted, fabricated of CRCA sheets completely derusted , chemically treated and powder coated with shade suggested by client and having items as per SLD
1
-
-
INCOMER
-
-
-
250A 4P MCCB MP LSIG 36KA Raw Power
-
-
-
MFM with LED indication Lamp
-
-
-
BUS BAR
-
-
-
250A 4P 36KA-1 SEC, 415V 3 PHASE,50 Hz, PVC SLEEVED AL busbar
-
-
-
OUTGOING
-
-
-
6 Nos. 63 A 10 KA,4P MCB with LED indication Lamp
-
-
-
8 Nos. 40 A 10 KA,4P MCB with LED indication Lamp
-
-
-
4 Nos. 16 A 10 KA,4P MCB with LED indication Lamp
-
-
-
Women's Hostel Panel- as per SLD and Specs. Supply, Installation, Testing & Commissioning of MAIN PANEL - floor mounted with frame of suitable M.S. channel dully painted, fabricated of CRCA sheets completely derusted , chemically treated and powder coated with shade suggested by client and having items as per SLD and Specs.
1
-
-
INCOMER
-
-
-
250A 4P MCCB MP LSIG 36KA Raw Power
-
-
-
MFM with LED indication Lamp
-
-
-
BUS BAR
-
-
-
250A 4P 36KA-1 SEC, 415V 3 PHASE,50 Hz, PVC SLEEVED AL busbar
-
-
-
OUTGOING
-
-
-
10 Nos. 63 A 10 KA,4P MCB with LED indication Lamp
-
-
-
12 Nos. 40 A 10 KA,4P MCB with LED indication Lamp
-
-
-
8 Nos. 16 A 10 KA,4P MCB with LED indication Lamp
-
-
-
Supplying and erecting 75 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC - Men's Hostel
3
-
-
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 250 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required)
-
-
-
(a) 4 way with 250A MCCB as Incomer double door Cat A
4
-
-
(b) 8 way with 250A MCCB as Incomer double door Cat A
7
-
-
(c) 12 way with 250A MCCB as Incomer double door Cat A
1
-
-
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)
-
-
-
(b) 4 way (8+12), double door, Horizontal type Cat A
1
-
-
(c) 6 way (8+18), double door, Horizontal type Cat A
5
-
-
(d) 8 way (8+24), double door, Horizontal type Cat A
22
-
-
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)
-
-
-
(o) 12 way double door Cat B
9
-
-
Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required
-
-
-
(c) 160 A Adjustable 35/40 KA, CAT A
1
-
-
(d) 200 A Adjustable 35/40 KA, CAT A
1
-
-
(e) 250 A Adjustable 35/40 KA, CAT A
1
-
-
(f) 400 A Adjustable 35/40 KA, CAT A
1
-
-
Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required" (c) 5 A to 32 A, Cat B
684
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
(j) TPN, Cat B
78
-
-
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
(h) DP, Cat B
9
-
-
(j) TPN, Cat B
14
-
-
Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB
1
-
-
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
(h) DP, Cat B
1
-
-
(i) TP, Cat B
1
-
-
(j) TPN, Cat B
12
-
-
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB"
51
-
-
Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB"
45
-
-
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
3852
-
-
Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC
5122
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
(f) Group C -- with Cat B Modular Accessories
1074
-
-
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
318
-
-
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
298
-
-
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW
12
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit (heavy) of appropriate size as required.
-
-
-
(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
5937
-
-
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
(b) 25 mm
5420.1
-
-
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
3 1/2 Core 300 sq.mm
1100
-
-
3 1/2 Core 185 sq.mm
400
-
-
3 1/2 Core 50 sq.mm
3025
-
-
3 1/2 Core 35 sq.mm
285
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
4 Core 10 sq.mm
90
-
-
4 Core 16 sq.mm
30
-
-
Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
-
-
-
4 Core 4 sq.mm
1040
-
-
4 Core 6 sq.mm
480
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
-
-
-
(b) In rocky strata
700
-
-
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground in the same trench in one tier horizontal formaion including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
-
-
-
(b) In rocky strata
1100
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required
100
-
-
Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.
10
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
(11) 3 1/2 x 300 Sq. mm.
16
-
-
(8) 3 1/2 x 185 Sq. mm.
2
-
-
(3) 3 1/2 x 50 Sq. mm.
100
-
-
(2) 3 1/2 x 35 Sq. mm.
12
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
(2) 4 x 4 Sq. mm.
38
-
-
(3) 4 x 6 Sq. mm.
12
-
-
(4) 4 x 10 Sq. mm.
12
-
-
(5) 4 x 16 Sq. mm.
4
-
-
Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
362
-
-
Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.
198
-
-
Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
358
-
-
Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10V, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2
10
-
-
Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC
40
-
-
Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB
10
-
-
Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB
10
-
-
Supplying and erecting Street light bracket for erection of Single fitting on pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC
10
-
-
Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC
10
-
-
Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF
202
-
-
Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF
60
-
-
Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.
202
-
-
Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.
202
-
-
Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original
202
-
-
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or upto 75 mm complete erected with duly painted by one coat of red oxide paint equivalent square size and having depth and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab
202
-
-
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
202
-
-
Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.
202
-
-
Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections
3
-
-
Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.
24
-
-
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
14
-
-
Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.
60
-
-
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
399
-
-
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required
-
-
-
(a) Cat 6
7704
-
-
Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
256
-
-
Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch
panel complete as per specification no. WG-NAS/KJ
216
-
-
Supplying and fixing 24 port patch panel with tool-less keystone jacks in
provided U Rack complete as per specification no. WG-NAS/PP
16
-
-
Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC
322
-
-
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK
6
-
-
Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK
3
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
300
-
-
4 Core 4 sq.mm
-
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required
-
-
-
(b) In rocky strata
300
-
-
Hot Water Re-Circulating Pumps
4
-
-
Electrical starter panel shall include the thermostat and the timer control with all the other requirements as specified above as well as in technical specifications.
-
-
-
Capacity/ Flow rate of System - 0.28 LPS [1.0 m3/hour]
-
-
-
Head - 25 mt
-
-
-
Approx. Elec. Load. - 0.5 KW or Optimum each pump
-
-
-
Location - On Hot Water Return line at Terrace level
-
-
-
1 Set = 2 Nos. Pump (1 Working + 1 Standby )
-
-
-
Supply, installation, testing and commissioning of panels suitable for 415 V, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor/wall mounting, sheet metal enclosed flush front dust and vacuuming proof with Aluminium bus bars separate earth bus bars to be provided throughout the length of the panel. The incoming and outgoing feeder shall be accommodated in a modular multitier arrangement. The painting shall done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided for each cable bending and termination. Bus bars shall be provided with heat shrinkable colour coded PVC sleeves.
-
-
-
The panels shall be suitable for cable entry from top/Bottom. The minimum fault rupturing of all incoming and outgoing switches/breakers shall be as specified. The panels shall be fabricated after the approval of fabrication drawings.
-
-
-
The panels shall be necessary relays / contactors for start / stop from auxiliary inputs of respective equipments.
-
-
-
Electrical supply feeder will be given to each control panel of pumping systems electrical contractor / client.
-
-
-
Starter:
-
-
-
Starter shall be complete with O/L Relay with Single phasing preventer feature, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, earth leakage relay with multiple trip setting with CBCT, etc. suitable for the motor HP/ KW as specified above and with provision for remote P.B. on/off complete as required.
-
-
-
Water Level Controller with level switches :
-
-
-
Water level controller shall be provided for each starter with sufficient nos. of low/high level switches for the auto operation of the pumps. Cost for wiring from level switches to the starter panel shall be included in this item and shall not be paid separately.
-
-
-
Starter control scheme as below:
-
-
-
Auto/manual test mode selection
-
-
-
on/off operation from local / remote
-
-
-
working / standby selection and cascade operation
-
-
-
Level controller with sufficient nos of low/high level alarm, contacts with electrodes and control wiring for the same for automatic operation of pumps to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks. The water pumps must be tripped at high level of water and start at low level of water in tanks.
-
-
-
indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. Necessary provisions for potential free contacts / RS485 shall be provided in the panel. On-off operation for all the pumps shall be available on the BMS system
-
-
-
Control Panel for Hot water re-circulating pump
-
-
-
Control panel shall include the thermostat and timer
-
-
-
Location: Terrace level
-
-
-
Cables, Sub mains & Cable Trays:
-
-
-
Supply, installation, testing and commissioning of following sizes of PVC sheathed XLPE insulated Aluminium conductor/ power/control armoured cables of 1100V grade on surface of wall or in G.I. perforated cable trays with fixing hardware etc. as required including G.I perforated cable trays, termination earthling, etc complete as required.
-
-
-
Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension : 1020 x 846 x 1840 (mm) max., Input power: 10.3 kW, 400 V, 3 Ph, 50 Hz, Output power: 38 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, with top throw fan, tube type heat exchanger 5 nos. inbuilt temperature sensor and two pressure sensors, centrally controlled operation, operational noise level: 65 dBA with provision for controlling auxiliary heater with necessary accessories complete with 5 years ON-SITE warranty
4
-
-
Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2 insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.
4
-
-
Supplying & erecting Minimum three & above star rated Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/3 HP with discharge 600/110 Litres per Minute (LPM) for head of 13/43 m and 65 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP
14
-
-
SITC of Electric Traction Passenger Lift with
3
-
-
· Rated capacity :- 13 Passenger/884Kg
-
-
-
· Floors :- G+2 floor (3 Stops/3 Landings)
-
-
-
· Travel :- 9 to 10 mtrs
-
-
-
· Location of Lift Machine:- MRL
-
-
-
· Rated speed :- 1.0mps VS
-
-
-
· Car/Landing door clear opening of 900 mm wide x 2000mm high, Center opening lift doors
-
-
-
· Clear Car size of 1500 mm wide x 1450 mm deep x 2200mm high
-
-
-
· Lift shaft available having min. clear size of 2175 mm wide x 1800 mm deep, 1700 mm Pit depth, 4200 mm Overhead.
-
-
-
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).
-
-
-
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & mirror polished granite stone flooring (of approved colour & shade), handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.
-
-
-
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
-
-
-
· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.
-
-
-
· Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30
latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.
-
-
-
· ARD complete with necessary SMF VRLA batteries.
-
-
-
· Fireman controller having fireman switch at fire Landing.
-
-
-
· CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed
on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days min. with 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.
-
-
-
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
-
-
-
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.
-
-
-
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.
-
-
-
· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge.
-
-
-
· The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
-
-
-
for Additional 2MP camera with necessary accessories at Home landing
3
-
-
Supplying and erecting 65 mm dia. cast iron foot valve at position with
necessary materials complete.
8
-
-
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
4
-
-
Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall with insulating and non-corrosive bond with required joints. As per specification no. EA-EP
1600
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP
1200
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP
10
-
-
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete
6
-
-
Providing and back filling ground enhancing compound 25 kg bag complete
6
-
-
Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kWcapacity for manual/automatic operation and consisting of following :
(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete,as per specification no. FF-MFP/BP
2
-
-
Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications. 8.Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications. E. For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, add Rs....... 1. for 5.5/ 7.5 kW centrifugal type booster pump 1no (1working) , add Rs…....
2
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP
12
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP
7.8
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP
300
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP
12
-
-
Providing coating of bitumen paint & 4mm thick wrapping for
underground 100 mm ring main of fire fighting system
30
-
-
Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
2
-
-
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
2
-
-
Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
4
-
-
Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.
2
-
-
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
2
-
-
Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
18
-
-
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV
18
-
-
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
36
-
-
Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FFFFA/ NZ
18
-
-
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
8
-
-
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
2
-
-
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
2
-
-
Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP
18
-
-
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour ( Code 538 of IS 5)
2
-
-
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
18
-
-
Supplying, erecting, testing and commissioning manual call point (Pill box) with break glass push button and flip abort switch or agent release switch in metal enclosure complete as per specification no. FF-FAAS/MCP
18
-
-
Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR
18
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
210
-
-
Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories, 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS/FACP
2
-
-
Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM
108
-
-
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
18
-
-
Providing and laying three coat of anticorrosive and anti-toxic surface coating for MS pipeline. The paint shall be applied after removing the scales and rust over the pipe by wire brush. Paint shall be applied uniformly to achieve uniform coating of average DFT of 60 microns per coat with the brush. 2nd coat shall be applied over the 1st coat after 8 hrs. the process shall be repeated for the 3rd coat. DFT for the final coat shall be 35 microns. Final surface shall be uniform and shall have total thickness of about 150 microns. The rate is inclusive of material, transportation up to the site of work including, labour, machinery as required etc. complete. All three coats shall be of distinctive colour as approved be Engineer-in- charge.
210
-
-
Dry Chemical Powder Extinguisher of capacity 6 kg. as per IS 15683 with hanging bracket & accessories.
18
-
-
Providing and Fixing, Testing and commissioning of Pump ON-OFF Switches fitting including cost of cabling, and convayence of all materials to site, labour charges, overheads and contractor's profit complete for finished item work complete as required.
18
-
-
Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements