Goa Tourism Development Corporation Limited Tender
View complete overview of Goa GTDC Tender
Costs
EMD
₹ 2,54,075Document Cost
₹ 8,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GTDCL_19162_1Bid Award Id
ViewTender No
GTDC/PC/EE(N)/2024-25/e-50Tender Authority
Goa Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
62.87
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
19.75
-
-
... More
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement:4 coarse sand) in foundation and superstructure
31.22
-
-
... More
Brick work using fly ash bricks in cement mortar 1:5 (1 cement : 5 coarse sand) with bricks of class designation 40 kg / cm2 in superstructure upto floor five level.b. 230 x 110 x 80 mm
9.42
-
-
... More
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All work up to Plinth level
12.6
-
-
... More
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level. M-30grade of concrete
60.82
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for , Foundation, footings, bases of columns
7.2
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for, Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
192.2
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for, Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
53.14
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for, Suspended floors, roofs, landings, shelves & their supports
6.3
-
-
... More
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
4013.52
-
-
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. (b) In tees, angles, flats and channels
8
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
5735.1
-
-
... More
Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses. sheet fixed with gavalnized iron j or l hooks, bolts and nuts G.I. limpet & bitumen washer complete bent to shape and fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand). a) 0.63 mm thick sheet - 24 G
197.86
-
-
... More
Proving ridges or hips of width 60 cm over all in plain G.I. sheet fixed with galvanized iron J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately). b) 0.63 mm thick G. I. Sheet.
39.6
-
-
... More
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
12
-
-
... More
Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design. A) 0.80 mm thick sheet
52.4
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. a)60 mm thick in all colours except grey (M35 grade)
50
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. b) 60 mm thick in Grey colour (M35 grade)
50
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. c) 80 mm thick in all colours except grey (M40 grade)
48
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. d) 80 mm thick in Grey colour (M40 grade)
48
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
330.9
-
-
... More
12mm cement plaster 1:3 (1 cement : 3 fine sand)
89.53
-
-
... More
Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade.
179
-
-
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
1254
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2187.19
-
-
... More
Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
115.5
-
-
... More
Providing and fixing waterproofing treatment to sanitary blocks consisting of layers of Laterite stone coba of 75 mm thick in cement mortar 1:2 sand witched between two layers of cement mortar 1:4 (20 mm thick ) mixed with water proofing compound, top finishing coat of cement slurry 6 to 12 mm thick with water proofing compound etc. complete with 32 mm dia PVC pressure relief pipe of adequate length including waterproofing treatment to 750 mm height (maximum) of side wall, and bottom surface in cement mortar 1:4 with waterproofing compound and covering 10 years guarantee on court fee stamp of Rs. 100 with ponding test including all lead, lift etc. complete as directed by Engineer.
4
-
-
... More
Providing and applying Crystallization waterproofing for watertank/ sumps/ sloping and flat slabs/chajjas/ terrace etc of approved make. The waterproofing system shall include treatment of construction joints, downtake pipes junctions, cutouts, repair of honey combing if any in the concrete surface, filling the cracks, gruting if required, making vatta along the horizontal and vertical joints of concrete with approved make . The application of the system shall be as per manufacturers specifications over the surface include cleaning of the surface with wire brushing, watering, curing etc. complete. (The process and applicator shall be as approved by the manufacturer. Contractor to provide 10 year guarantee on a stamped paper.).
27
-
-
... More
Carting away unwanted excavated material such as soil, lime, moorum, building rubbish (RCC debris, masonary debris, woodwork, door & windows, tiles etc), laterite stone, ordinary rock etc. from site lead of 5km including all loading & unloading charges ( A ) ( by mechnaical Automative Transport ) Contractor should arrange land for dispose up these material at his own cost Lead upto 5 km. Contractor should quote the rate considering salvage value of mentioned material. All statutory approval will be taken by Contractor. b) Excavated earth.
163
-
-
... More
Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
10
-
-
... More
Providing & fixing 35mm thk flush door shutter, core of block board construction with frame of teak wood beeding 35m x 12mm thick bedding & 4mm thk marine ply on both faces with enemal painted including cost of Adhesive, Nails during fixing etc. complete.
7
-
-
... More
Providing and fixing anodized aluminum windows / Louvers / ventilators (including frame and shutter ) with 5 mm thick approved clear float glass / aluminum frame with glass louvers using weight and size of section not less then as specified or as shown in drawing with colour anodizing of 20 microns including sub frame ( wherever specified ) ,locking arrangement,silicon sealant ,EPDM gaskets, including all aluminum fixture and fittings etc. complete.
2
-
-
... More
PLUMBING WORKS
-
-
-
... More
Providing and fixing white vitreous Wall Hung type (European Type) water closet with symphonic low level 10 liters cistern mounted on the commode with white plastic seat and lid with all necessary fittings and pipe connection etc. complete. A) W.C. pan with white plastic seat and lid.
5
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook/holder of approved quality confirming to IS standards.
5
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS8931:1993 15mm nominal bore.
5
-
-
... More
Providing and fixing toilet paper holder : a) C.P. brass
6
-
-
... More
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. b) Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.
1
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
11
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590 mm x 375 mm x 390 mm size with Urinal Valve Auto closing system with built in control cock & wall flange with all type fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brass flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin. a) One urinal basin with 5 litres p .v .c. Automatic flushing cistern.
2
-
-
... More
Providing and fixing approved make circular below / under counter Wash hand basin - white vitreous china of size 440 x 440 mm including C.P.Piller Tap, 32 mm C.P.Waste coupling, PVC flexible pipe inlet connection and C.P.Wall Flange complete with necessary bolts, bents, tees, brass screws including cutting of granite, making holes in the wall if required and making the surface good to the satisfaction of Engineer.
11
-
-
... More
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws. B) Plastic container
6
-
-
... More
Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.a) Long pan pattern W. C. Pan
1
-
-
... More
Providing and fixing brass bib cock (heavy) of approved quality : a) 15 mm nominal bore
1
-
-
... More
Providing & fixing Stainless steel with perforated/plan grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete. perforated/plan cover for wash basins, shower, sinks,etc. - Top grating Size in mm - 100 x 100. a) (110 mm)
14
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110mm
14
-
-
... More
Providing and fixing Angular Stop Cock with wall Flangue - Jaquar make. (a)Florentine (FLR-5053N) 15mm of approved quality.
19
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a)15 mm outer dia CPVC pipe
25
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. b) 20 mm outer dia CPVC pipe
18
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. c) 25 mm outer dia CPVC pipe
8
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white). a) 20mm outer dia.
5
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white). b) 25mm outer dia.
10
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white). c) 32mm outer dia.
23
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white). d) 40mm outer dia.
35
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. 1. SCH-40(blue)/(white). c) 32mm outer dia.
5
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) a) 15mm nominal bore
2
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) b) 20 mm nominal bore .
5
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) c) 25 mm nominal bore .
1
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) d) 32 mm nominal bore .
3
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) e) 40 mm nominal bore .
2
-
-
... More
Providing and fixing water level controller with censors for ohwt & ugwt.
1
-
-
... More
Providing and fixing non-return valve of approved quality : b) 32 mm nominal bore
2
-
-
... More
Providing and fixing C.I. Strainers for Water Meters including cost of all materials and labour. I C.I. Stainer 'Y' type with screw ends. d) 40 MM dia
1
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm (a) 40 mm dia.
1
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm (b) 50mm dia.
4
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm (e) 100 mm dia.
1
-
-
... More
Supplying and fixing C.I. cover without frame for manholes: (FOR OHT & UGR). a) 445x610 mm rectangular C.I. cover (light duty) weight of cover to be not less than 23 kg.
2
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : a) 110mm dia
43
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : b) 75mm dia
34
-
-
... More
Providing,laying and fixing P.V.C.pipe of 40mm dia.withfittings such as bends,tees,reducers,clamps,etc.includingnecessary excavation,trenchfillingetc.complete.Including removin gexisting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15
-
-
... More
Providing,laying and fixing P.V.C.pipe of 50mm dia.withfittings such as bends,tees,reducers,clamps,etc.includingnecessary excavation,trenchfillingetc.complete.Including removin gexisting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
3
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a) 110mm
8
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b)75mm
8
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a) 110mm
5
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : b) 75 mm
5
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : a) 110mm
4
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : b) 75mm
4
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door. a) 110mm
5
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door. b) 75mm
5
-
-
... More
Providing and fixing R.P.V.C. vent cowl: a) 110mm
2
-
-
... More
Providing and fixing R.P.V.C. vent cowl: b) 75mm
2
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. .(100 mm Dia Pipe For LV System). I)NP2 Class. c) 150 mm
30
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, encasing pipe joints of minimum 600mm width on both sides with pcc1:2:4, necessary hydraulic testing, curing of cement mortar etc. complete.(100 mm Dia Pipe For LV System). b) 150 mm
30
-
-
... More
Providing and fixing square-mouth S.W. Gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b) 150 mmx 100mm P or S.type
2
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. b) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )
4
-
-
... More
Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres/hr and storage capacity 120 litres with partially stainless steel body complete. specification no. AP-WCR/WC
2
-
-
... More
Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)
2
-
-
... More
Supplying and erecting minimum Three & above star rated 1 phase, 230 V, 50Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having delivery head from 30 to 15 m and discharge from 30 to 270 litres. per minute & pipe of Suction 32 mm/Delivery 25 mm diameter erected with necessary H type clamps.
1
-
-
... More
INTERIOR WORKS
-
-
-
... More
TABLE WITH DRAWER PEDESTAL & SIDE TABLE, TABLE WITH PEDESTAL & SIDE TABLE (T1), (TABLE SIZE:1500mm(L)X 750mm(D) X 750mm(HT) , SIDE TABLE SIZE :900mm(L) X450mm(D) X700-750mm(HT), (PEDESTAL SIZE:400mm(L)X 600mm(D) X 650mm(HT) .Table: Supplying and installing in position Table of approved male, colour and size, having main table with top made up from 19mm thick boiling water proof plywood with 2 mm thickly PVC (Polyvinyl Chloride) edge banding on all sides supported on 50x25mm powder coating of thickness 50 to 60 microns mild steel frame and 50x50mm powder coated mild steel Legs and having Modesty panel in 19 mm BWP plywood with exposed edges in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Table will have independent wire manager and powder coating of thickness 50 to 60 microns for the Ley board tray of standard size. The Keyboard tray to accommodate mouse pad. Pedestal: The table will have a mobile pedestal unit of size 400mm(L)X600mm(D)X650mm(H) with top made up of 19+6mm thick BSL (both side laminated) boiling water proof plywood with sides in 19mm thick boiling water proof plywood and 75 mm height skirting with 2mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges in 0.8 mm thick PVC edge banding. The pedestal will have three equal size drawers with front fascia having centraL Locking system & handLes ,stainless steel telescopicchanneLs and casters for added mobiLity. Side TabLe: The side tabLe of specified size with top made up of 19+6 mm thick boiling water proof plywood with 2mm PVC (PoLyvinyL ChLoride) edge banding & supported on 19mm thick gable ends. Storage cabinet beLow with 19 mm thicLBWP plywood sLiding shutters & shelves. with all hardware Lile handLes, hinges, ChanneLs for sliding shutters etc complete. Note: All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer . Wire routing/ wire management shall be provided on main tabLe or side tabLe as specified rates shall include cut-outs to fix switch plates wherever specified. (Refer drawing number IN-205, IN-206)
4
-
-
... More
TABLE WITH DRAWER PEDESTAL ,(TABLE SIZE:1350mm(L)X 600mm(D) X 750mm(HT) ,(T2), (PEDESTAL SIZE:400mm(L)X 400mm(D) X 650mm(HT) . Table: Supplying and installing in position table of approved make, colour and size, having main table with top made up from 19mm thk boiling water proof plywood with 2 mm thick PVC (Polyvinyl Chloride) edge banding on all sides supported on 50x25mm powder coating of thickness 50 to 60 microns mild steel frame and 50x50mm powder coated mild steel legs and having Modesty panel in 18mm the BSL(both side laminated ) exterior grade prelam particle board with exposed edges in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Table will have independent wire manager and powder coating of thickness 50 to 60 microns for the key board tray of standard size. The keyboard tray to accommodate mouse pad. Pedestal: The table will have a mobile pedestal unit of size 400mm(L)X400mm(D)X650mm(H) with top made up of 25 mm thick BSL (both side laminated) prelaminated particle board with sides in 18 mm thick pre laminated particle board and 75 mm height skirting with 2mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges in 0.8 mm thick PVC edge banding. The pedestal will have three equal size drawers with front fascia having central locking system & handles ,stainless steel telescopicchannels and casters for added mobility. Note: All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer . Wire routing/ wire management shall be provided on main table or side table as specified rates shall include cut-outs to fix switch plates wherever specified. (Refer drawing number IN-205, IN-206)
2
-
-
... More
ROUND DISCUSSION TABLE, (TABLE SIZE:750mm DIA X 750mm(HT) (T4). Supplying and installing in position table of approved make, colour and size with top made up of 19 +6 mm boiling water proof plywood having pre-lamination/ post -lamination with post forming along edges. The under structure shall be 50x25mm powder coating of thickness 50 to 60 microns mild steel frame and powder coated mild steel prong type legs mounted on a 75mm diameter mild steel vertical pipe .All exposed edges shall have 2mm thick PVC edge banding and sealed edges shall have 0.8mm thick PVC edge banding. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number IN-205, IN-206)
2
-
-
... More
SS CORNER TABLE, SS CORNER TABLE (T5), (SIZE:600mm(L)X600mm(D)X450mm(HT) .Supplying & installing in position corner table made of S.S. framework and 10 mm thick toughened glass top of approved color fixed to the framework . All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number
1
-
-
... More
STORAGE UNIT , ( SIZE: 900 mm(L) X 450 mm(D) X 750 mm(HT)(SU1). Supplying and installing in position storage of approved make, colour and size with top made up of 19 +6 mm boiling water proof plywood to be extended in one piece as specified & having storage body made up of 19 mm thick boiling water proof plywood, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (up to 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 19mm thick boiling water proof plywood with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding . All material shall be of approved make. All complete as per the drawing / Image, technical specification and direction of the Engineer.(Refer drawing number IN-205, IN-206)
3
-
-
... More
BACK STORAGE UNIT, BACK STORAGE UNIT (SU2), (SIZE: 2350mm(L) X 450mm(D) X 750mm(H). Supplying and installing in position storage of approved make, colour and size with top made up of 19 +6 mm boiling water proof plywood to be extended in one piece as specified & having storage body made up of 19 mm thick boiling water proof plywood, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (up to 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 19mm thick boiling water proof plywood with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding . All material shall be of approved make. All complete as per the drawing / Image, technical specification and direction of the Engineer.(Refer drawing number IN
3
-
-
... More
METAL STORAGE CABINET (MS), (SIZE: 900mm(L)X 450mm(D) X 1830mm(HT). Supplying and installing in position Metal storage cabinet of size 900 mm (W) x 450 mm (D) x 1830 mm (H) made of Prime Quality CRCA Steel with panels from 0.6 mm thick CRCA Steel and front frame and shelf made from 0.8mm thick CRCA Steel. The cabinet shall be provided with Full height Steel Hinged Door with Plastic Recessed Handle cum Cam Lock which shall be having 3 way locking mechanism with shooting bolt arrangement.4 numbers of height Adjustable Full Shelves shall be provided having maximum 80 kg uniformly distributed load capacity. The top shall be in metal. The cabinet shall be finished with 50 Microns (+/-10) thick Epoxy Powder coating. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.. (Refer drawing number - )
6
-
-
... More
DESK WITH MODESTY PANEL TABLE WITH MODESTY PANEL (SIZE:1000mm(L)X400mm (D)X750mm(HT). (CT1). Supply & Installation of desk top of thickness 25mm, Marine ply IS 710(BWP) top with 1mm thick laminate IS :2046 on it. Edges need to be glued with Polyurethane seamless melamine faced edge banding of thickness 2mm. The under structure shall be of Mild steel powder coated of approved shade, oval pipe having dimension of 50mm x 25mm x 1.5mm thickness or M.S. oval pipe section with equivalent unit weight and load carrying capacity. Powder Coating shall be of thickness 85 microns. To provide stability Desk Base shall be of Poly Propylene Horse Shoe bushes completely covering the metal pipe. The desks should have a modesty panel of 18mm thick BWP marine Ply with laminate of 1mm thick for the under structure in the front. The modesty panel should touch the Desk Top from underneath. The under structure should consist of a Mild Steel 6mm thick wire mesh book shelf duly powder coated of approved colour. The desk top shall also consist of a Pencil/Pen Groove of Polyurethane which shall be across the length according to the instructions of the Engineer. Side bag Hooks for holding the bags up to 30Kgs capacity should also be provided. Size of modesty panel should be minimum 1000mm(L) x 350mm(H) . (Refer drawing number IN-205, IN-206)
2
-
-
... More
CHAIRS FOR EXECUTIVES/ CONFERENCE(C1). Supplying and placing in position armed revolving high back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. The seat chair shall have seat made up of hot pressed moulded reconstituted wood of 1.2 +/- 0.1cm thickness and back shall be in two part injection moulded plastic. The chair shall have High Resilience polyurethane foam moulded with density of 45 kg/m3 and Hardness load of 16-/+2 kg. as per IS:7888 for 25% compression. The chair shall be 360 degree revolve type. The armrests shall be height adjustable and the arm rest top shall be in moulded PU. The chair shall have Synchro tilt mechanism with seat back tilt ratio of 1:2, seat depth adjustment with multi position locking, single point control, tilt tension adjustment, multi position back locking with anti shock feature, The chair shall have pneumatic height adjustment and back rest adjustment with multi position locking. The pedestal shall have aluminium die cast base and fitted with twin-wheel castors. The chair shall have mesh type upholstery for back and fabric 220 GSM on seat as per design.. (Min. rate of Rs 700/rm) All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number IN-205, IN-206)
6
-
-
... More
TANDEM CHAIRS - 2 SEATER (C5). Supplying and placing in position 3 seater, with arms tandem chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. Chair shall have a Cross beam support made up of black powder coated rectangular M.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size. Leg and armrest shall be chrome plated made of cold rolled steel with 0.12 ± 0.013 cm thinkness. Seat back shell shall be powder-coated perforated shell made from cold rolled M.S. sheet (ST-12 Grade) 0.15 ± 0.013 cm thickness. The Side Bar shall be made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell shall be assembled on the Cross Beam with help of MS Bolts. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer (Refer drawing number - )
2
-
-
... More
PLATFORM (SIZE- 2700MM(L) X 1650MM(W) X200MM(HT) , PLATFORM (SIZE- 2700MM(L) X 1650MM(W) X200MM(HT) (B2) . Providing & fixing 200mm height platform with framework in 38 x 200mm second class Matti wood planks at approximately 600mm x 600mm centre to centre placed both ways fixed with tongue and groove joint as shown in the drawing. Top and sides shall be in 19mm thick Marine BWP IS : 710 plywood wide finished in 1mm thick texture laminate. All external exposed surfaces shall be finished with 3 or more coats French polish on underside/ internal surfaces complete with necessary labour and hardware, wire management etc complete as per drawing. All material shall be of approved make. Measurements shall be calculated of Top plan of platform (length x depth). All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number IN-603)
8.91
-
-
... More
GYPSUM FINISH PARTITION (B3). Providing & fixing in position solid partition made of aluminum framework of size 65mm x 38 mm tubular frame ,18 gauge having grid spacing at 600mm x600mm center to center both ways & covered with 8 mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with 12mm thick Gypsum plasterboard. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool having density of 48 Kg/ Cum for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material will be of approved make. Measurements shall be calculated from finished floor level to false ceiling level, the framework above false ceiling will not be calculated but the rate shall include the cost of framework above false ceiling upto slab/beam bottom wherever applicable. All works complete as per the drawing, specification and direction of the Engineer.
25.74
-
-
... More
GLASS PARTITION (B4). Providing & fixing full height glass partition upto maximum 2400 mm height with 12 mm thick toughened glass having etching pattern as approved fixed on Twin pro Interlocking anodized solid aluminum Single glazing profile on top and bottom sides as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion.The item also includes silicon filling in between glass joints . All material shall be of approved make.All works complete as per the drawing, specification and direction of the Engineer
11.97
-
-
... More
SINGLE SHUTTER GLASS DOOR (B5). Providing & fixing in position glass door using 12 mm thick toughened glass having etching pattern as approved fixed using double action floor spring, top patch and provided with SS 304 grade matt finish handle, SS brush finish bottom patch lock & PVC door buffer. .All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
3
-
-
... More
STAINLESS STEEL DUST BIN (200mm dia x 275mm ht ). Providing and placing in position 16 gauge stainless steel pedal dust bin of grade 304 cylindrical with cover (200mm dia x 275mm ht). All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer. (Refer drawing number IN-304,305,306)
9
-
-
... More
PLASTIC DUST BIN (200mm dia x 275mm ht ). Providing and placing in position virgin polymer (HDPE) dustbin of thickness 2.5mm (+/-0.2mm) with a circular top of about 200mm diameter , height 275mm. All material shall be of approved make.
10
-
-
... More
PLASTIC DUST BIN WITH FLIP PUSH TOP (425mm dia x 655mm ht ). Providing and placing in position virgin polymer (HDPE) dustbin of thickness 2.5mm (+/-0.2mm) with a circular top of abou t425mm diameter and height 655mm.It shall be fitted with round spring push flap liC. All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.
1
-
-
... More
FLOOR MATS. FLOOR MATS(SIZE - 900 X 600MM). Providing and placing in position PVC (Poly Vinyl Chloride) green mat of thickness 15mm of approved make, approved colour made of special polymer tufts that scrape stubborn dirt with designer anti-curl edge guards, natural elastomer base,100% anti skid, hygienic & non-toxic etc. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
6
-
-
... More
Supplying & fixing in position approved painting in digital printing on digital printing paper with synthetic frame & lamination. The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – CC-IN-501,CC-IN-502,CC-IN-503,CC-IN-504,CC-IN-505,JT-IN-501 ). (SIZE : 300 X 600 MM)
6
-
-
... More
PIN -UP BOARDS (SOFT/MAGNETIC BOARDS) (SIZE - 1200 X 600MM). Supply and installing in position soft display board having Powder coated aluminum frame including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares and easy fixing to the wall. All material shall be of approved make. All works complete as per the drawing / Image, specification and direction of the Engineer. (Please refer drawing no. IN-501, IN-502, IN-503 and IN-504.)
3
-
-
... More
GREEN CHALK BOARD (SIZE : 2400MM(L) X 1200MM(HT). Providing and fixing in position non magnetic green chalk board of Ceramic steel sheet matt finish in green colour including Anodized Aluminium frame Virgin ABS Moulded 300x100mm chalk tray & Eraser complete.Including all accessories complete. All the materials shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer.(Please refer drawing no. IN-501, IN-502, IN-503 and IN-504.)
1
-
-
... More
NOTICE BOARD WITH ACRYLIC DOOR & LOCK (SIZE : 1200 X 900 MM). Providing and fixing in position Notice board as per image of size 1200mm(L) X 900(HT) mm made of Powder coated Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design.All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. (Refer drawing number – CC-IN-501,CC-IN-502,CC-IN-503,CC-IN-504,CC-IN-505,JT-IN-501 )
1
-
-
... More
MAGNETIC WHITE MARKER BOARD (SIZE : 2000MM(L) X 1200MM(HT). Providing and fixing in position approved Magnetic white matt finish marker board of (SIZE - 2000 X 1200 ) having Moulded Anodized Aluminium frame & stain resistant porcelain coated 28 gauge steel backing with Virgin ABS (Acryloniprile Butadiene Styrene) Molded 300x100mmm marker tray and Eraser complete, including all accessories. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. (Refer drawing number – CC-IN-501,CC-IN-502,CC-IN-503,CC-IN-504,CC-IN-505,JT-IN-501 )
1
-
-
... More
Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as requireC. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – ) . SIZE - 300mm (L) X 150mm (HT)
2
-
-
... More
Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as requireC. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – ) . SIZE - 300mm (L) X 300mm (HT)
3
-
-
... More
Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as requireC. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – ) . SIZE - 450mm (L) X 200mm (HT)
8
-
-
... More
MIRROR SIZE – 600mm(L) x 900mm(HT) . Providing & fixing in position mirror of approved design, make, colour and size in 6mm thickness with plain crystal edge polish on all sides and fixed using stainless steel mirror holding buttons/brackets, mirror back shall be flushed with wall & complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer.(Refer drawing number – IN-501 to IN-504 )
6
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Supplying,installation,testing,commisioning of Outdoor Decorative bulkhead fitting suitable for upto LED upto 12W fixed on wall with all required accessories . (Surface type fixture)
5
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm
364
-
-
... More
Supplying of flat flexible 3 core 4 sq.mm PVC sheathed and PVC Insulated submersible type copper cable suitably clamped at fixed intervals with column pipe assembly completes with Voltage Grade 1100 Volts as per IS:694/2010.
30
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 6 sq.mm
36
-
-
... More
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 6 sq.mm
25
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 2.5 sq.mm
50
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm
147
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 10 sq.mm
15
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 70 sq.mm
100
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. a) In soily strata
250
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
80
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
417
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
20
-
-
... More
Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.
6
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 1.5/2.5 Sq. mm.
8
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.3 x 4 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 6 Sq. mm.
6
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.4 x 1.5/2.5 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.4 x 6 Sq. mm.
12
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.4 x 10 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 70 Sq. mm.
4
-
-
... More
Supply Installation, testing and commissioning of Following all Panels comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted (Include stand), IP-55 degree protection, Bottom or Top bus duct or cable entry as per the case & Bottom or Top cable exit steel, 2mm frame, 1.6 mm compartments & tank process treated & 2- times Epoxy painted. 3)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel. 4)-Current Density- 1.0 Ampere/1 Sq.mm (IS-8623 for factory built assembly). 5)- Earthing terminal at both end.6)-Paint-- Exterior Enclosure Tank process treated & 1 coat of Epoxy painted and 2 coat of Siemens grey as per shade RAL7032 with PU Paint for exterior and Black for base frame ,everywhere maintaining micron upto 75. 7)Any other related details as per Engineer Incharge. Refer Single Line Diagram. Supply Installation, testing and commissioning of Main LT Panel Incomer 1, 160 A TPN 25kA TMR Adj. OC & SC protection,RYB,ON OFF TRIP Indications, CT's. Incomer 2, 160 A TPN 25kA TMR Adj. OC & SC protection,RYB,ON OFF TRIP Indications. Busbar 1,160A TPN Tinned AL Busbar,25kA, Busbar 2,160A TPN Tinned AL Busbar,25kA, Outgoings 1no. 3Ph. GED approved meter & 1 no. 3 Ph. MFM on DG set Side,25-32A FP MCB 3 Nos.,25-40 A FP ATS/Motorised Changeover-1 no. : -4Nos. 1no. 1Ph. GED approved meter & 1 no. 1 Ph. MFM on DG set Side,25-32A DP MCB 3 Nos.,30A/30A A SPN/DP ACCL-1 no, 1no. 3Ph. GED approved meter & 1 no. 3 Ph. MFM on DG set Side,63A FP MCB 3 Nos.63 A FP ATS/Motorised Changeover-1 no. : -1Nos. And Compartment Space Provision. GED meter cost is not considered.
1
-
-
... More
Supply Installation, testing and commissioning of Main LT Panel-02 Incomer 63 A 10kA MCB ,C Curve,RYB,ON OFF TRIP Indications. Busbar ,60/63A TPN Tinned AL Busbar,16/25kA Outgoings 6-32 A SP MCB C Curve 10kA - 7 Nos. 32 A SP MCB C Curve 10kA - 1 Nos.with DOL starter complete(-Contactor,Overload relay,PB ,SS,On OFF Trip indications etc.) 40-63 A TPN MCB C Curve 10kA - 3 Nos. 6-32 A TPN MCB C Curve 10kA - 1 Nos.
1
-
-
... More
Supply Installation, testing and commissioning of 16 kVAr, 440 V 3 phase, 50 Hz., Capacitor Duty Contactor , consisting of suitable steps of APP type capacitor units with harmonic filter reactors complete.(Includes APFC relay-6 Stage.)(And Future Space provision for Leading p.F. Compensation)
1
-
-
... More
Supply, installation, testing and commissioning of electronic type single phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A
1
-
-
... More
Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A
5
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator). 8 way double door Cat B
1
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator). 12 way double door Cat B
1
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator). 16 way double door Cat B
1
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.a) SP, Cat B
71
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.c) DP, Cat A
2
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(d) FP, Cat B
4
-
-
... More
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (j) TPN, Cat B
1
-
-
... More
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required. (d) 25 A, Cat B
3
-
-
... More
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required '(d) 25 A, Cat B
3
-
-
... More
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (e) 40 A, Cat B
2
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) h) 4 way (8+12), double door, Horizontal type Cat B
2
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) i) 8 way (8+24), double door, Horizontal type Cat B
2
-
-
... More
Supplying and fixing SP blanking plate in the existing MCB DB complete as required.
5
-
-
... More
Supplying and Installing following size Perforated type 16 SWG, M.S.cable tray of GI pre-galvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. b) 150mm width x 50mm depth
64
-
-
... More
Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.
64
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. b) 150mm width x 50mm depth (16 SWG)
8
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. b) 150mm width x 50mm depth (16 SWG)
1
-
-
... More
Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long G.I. tube having single prong at top with 85 mm dia 6 mm thick GI base plate including holes etc. complete as required
3
-
-
... More
Reverting sweating and soldering of copper/ GI tape ( with another copper/ GI tape base of the finial or any other metallic object) as required
3
-
-
... More
Providing and fixing GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for horizontal run)
180
-
-
... More
Providing and fixing GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for verticle run)
80
-
-
... More
Providing and fixing testing joint made of 20 mm x 3 mm thick GI strip 125 mm long with 4 Nos of tinned brass bolts nuts check nuts and spring washers etc. complete as required
1
-
-
... More
Providing and laying GI tape 32 mm x 6 mm from earth electrode directly in ground as required
40
-
-
... More
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). b) b)In rocky strata
10
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). a) In soily strata
4
-
-
... More
Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)
14
-
-
... More
Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
45
-
-
... More
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
111
-
-
... More
Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
68
-
-
... More
Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
20
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing . as required
10
-
-
... More
Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required
20
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. (c) Group C -- with Cat B Modular Accessories
128
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing capping and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.
43
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with 2 way modular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories. (b) with Cat B Modular accessories
1
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing )
790
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing )
326
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. b) 25 mm
6
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. c) 32 mm
6
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (h) 5/6 A switch Cat B
29
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (k) 3 pin 5/6 A socket outlet Cat B
29
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (j) 15/16 A switch Cat B
19
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (l) 6 pin 15/16 A socket outlet Cat B
19
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required. (b) Cat B
10
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (h) 1 or 2 Module Cat B
24
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (i) 3 Module Cat B
11
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (j) 4 Module Cat B
4
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (k) 6 Module Cat B
5
-
-
... More
Supplying and fixing following size modular PVC box alongwith modular base and cover plate for modulator switches in recess etc. as required (m) 12 Module Cat B
3
-
-
... More
Supplying and erecting Surface/flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.
3
-
-
... More
Supplying,installation,testing,commisioning of bulkhead fitting suitable for upto LED upto 12W fixed on wall/wooden board in the lift shaft.
3
-
-
... More
Supplying,installation,testing,commisioning of LED 20W tube light fitting (4 feet) with PC housing, heat sink, integrated HF electronic driver complete. With Supended /Surface/Wall Mounted arrangement.Efficacy -100 lumens/ watt and above.
97
-
-
... More
Supplying and erecting LED 2 feet TubeLight with integrated driver including 10W lamp with polycarbonate housing and High translucent serrated milky white diffuser to be fixed above mirror or as required on clamps complete.Efficacy -100 lumens/ watt and above.
17
-
-
... More
Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (b) Cat B
38
-
-
... More
Supply and erecting S type Stainless Steel fan hook fabricated out of 10 mm round bar complete as required.
26
-
-
... More
Supply and erecting 'J' type Mild Steel fan hook fabricated out of 35 X 6 mm flat strip suitable for rafters complete with coach screws etc as required. (c) For 6 inches rafter size
12
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (b) Cat B
38
-
-
... More
GI Pipe Medium Class 25 mm (Civil GSR 1034 (f)(iii))
50
-
-
... More
Provided pair of duly tested rubber hand gloves as per IS:340715 suitable for working on 11kV supply
1
-
-
... More
Supply ,Installation,Testing & Commisioning of printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
1
-
-
... More
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
2
-
-
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV
3
-
-
... More
Supply & installation of 3kVA ,1Ph IN - 1Ph OUT true Online UPS System in standalone configuration with advance DSP based technology’ Double conversion IGBT Rectifier and IGBT based inverter UPS system with cabinet and SMF battery backup for 30 mins. using 12V batteries including battery protection M.S Rack suitable dimension, standard rating cable for interlinks cable and D.C cable up to standard Length in mtrs from UPS to batteries including labour charges for installation testing and commission and carrying charges.
1
-
-
... More
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 82.5 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 14.0 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 145 ltr etc., on provided M20 grade CC foundation.(As per CPCB4+ norms)
1
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
Supplying & installing of ABC Type Fire Extinguisher Cap. 4 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018.
6
-
-
... More
Supplying & installing of CO2 High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.
1
-
-
... More
Supplying & installing of Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher filled with AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, UTGS Pressure Gauge, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, Brass forged valves with safety Pin is of SS material, Made up from 2 mm thick sheet, As pe IS 15683:2018 and ISI Marked.
1
-
-
... More
HVAC WORKS
-
-
-
... More
Supply, installation, testing and commissioning of INVERTER HIWALL TYPE with Min. 3 star rating Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. 1.0 TR
4
-
-
... More
Supply, installation, testing and commissioning of INVERTER HIWALL TYPE with Min. 3 star rating Split A.C. with R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. 1.5 TR
4
-
-
... More
Supply, installation, testing and commissioning of ready made Oudoor Units Stands for above DX Units
8
-
-
... More
Supply, Installation ,testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of 19 Gauge hard drawn copper refrigerant piping for DX Inverter system,complete with all necesssary fittings,with suitable adjustable ring type hanger supports,jointing/ brazing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines as required : 6.4 mm dia(OD) (Soft drawn) with tube thickness 1.2mm with 19mm thick insulation
35
-
-
... More
Supply, Installation ,testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of 19 Gauge hard drawn copper refrigerant piping for DX Inverter system,complete with all necesssary fittings,with suitable adjustable ring type hanger supports,jointing/ brazing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines as required : 12.7 mm dia(OD) (Soft drawn) with tube thickness 1.2mm with 19mm thick insulation
35
-
-
... More
Supply ,Installation, Testing and Commissioning of square plate type propeller fan working on 1 Ph , 230V electrical supply complete with gravity louver , protection guard at inlet , external rotor motor , IP54 motor with class F insulation, other accessories required and power cable upto 1.5m , Fan static - 3mm to 5mm WC. Propeller fan for exhaust air-100 cfm
6
-
-
... More
Supply ,Installation, Testing and Commissioning of ceiling mounted exhaust fan . Static upto 5mm W.C
6
-
-
... More
Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete.
18
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping including tees, elbows etc .as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 25 mm Dia
30
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping including tees, elbows etc .as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 32 mm Dia
20
-
-
... More
LV WORKS
-
-
-
... More
Supplying, installing, testing and commissioning of Digital PBX with basic capacity of 2xTCO and 10 Analog Extensions.
1
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. a) 10 pair Junction box
1
-
-
... More
Supplying, installing, testing & commissioning approved type Analogue Push button telephone instrument, desk top/ wall mount with caller ID unit as per specification in approved manner. Upper ground floor
1
-
-
... More
Supplying, installing, testing & commissioning approved type Analogue Push button telephone instrument, desk top/ wall mount with caller ID unit as per specification in approved manner. Lower Ground floor
7
-
-
... More
Supplying and drawing/ fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/ recesed steel/ PVC conduit having folowing pair(s), complete as required. a) 2 Pair
200
-
-
... More
Supplying and drawing/ fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/ recesed steel/ PVC conduit having folowing pair(s), complete as required. c)10 pair
3
-
-
... More
Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/ surface GI/ PVC Box, modular plate, punching, identifying, complete as required. b) CAT-B
8
-
-
... More
Supplying, installing, testing and commissioning of AI Dual-Band Smart Router, Wi-Fi 6, 4 Gigabit Ports, 4 External Antennae, Voice Control, Parental Control (1500 megabits_ per_Second) wireless Router with 4 nos 10/100 LAN ports, 1no 10/100 WAN port, 1 no. SIM slot, USB 2.0 port, standard 802.11 ac/n/g/b, NAT/ SPI / Website filter / MAC address filter, connection provided by GBBN.
1
-
-
... More
Supplying, installing, testing & commissiong of FULLY MANAGED & loaded Layer 2 switch, 10 ports, PoE 8 RJ45 ports 10/100/1000 + 2 SFP having 16 Gbps / 11.9 Mpps, with device management licensed software, with key features of performance, Management, Security, Multicating, standard image, 64W, U rack mount, commercial LAN etc.
1
-
-
... More
Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/ surface GI/ PVC Box, modular plate, punching, identifying, complete as required. b) Modular GI box
8
-
-
... More
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/ recessed steel/ PVC conduit of appropriate size including connection, etc. complete as required. (For DATA & CCTV). a) CAT6 cable
400
-
-
... More
Supplying, Installing, Testing, commissioning of 24 port Patch Panel with toolless keystone jacks in provided U Rack complete.
1
-
-
... More
Supplying, Installing, Testing, commissioning of 1 meter length, UTP Patch cord of Cat 6 type in position.
8
-
-
... More
Supplying, Installation, Testing, commissioning of 3 meter length, UTP Patch cord of Cat 6 type in position.
8
-
-
... More
Supplying, installing & testing UTP Connector (RJ-45). Upper ground floor
1
-
-
... More
Supplying, installing & testing UTP Connector (RJ-45). Lower Ground floor
7
-
-
... More
Supplying, installing, testing & commissioning of 2 MP Full HD WDR IR Day & Night Indoor Fixed Dome Network Camera, 20M IR distance, focal length 3.6mm, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.2 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 25/30 FPS, H.264 video compression with features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software. Upper ground floor
4
-
-
... More
Supplying, installing, testing & commissioning of 2 MP Full HD WDR IR Day & Night Indoor Fixed Dome Network Camera, 20M IR distance, focal length 3.6mm, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.2 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 25/30 FPS, H.264 video compression with features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software. Lower Ground floor
11
-
-
... More
Supplying, Installing, Testing & Commissioning of 16 Channel Professional Network Video Recorder (NVR), support 8MP, rack mount for recording / playback / continuous / scheduled / event & motion trigger / Search / picture control, H.265, complete with all accessories & license 16 channel ONVIF, LAN 10/100/1000 connected, 100% recording for 30 days @ 1920x1080 resolution @ minimum 15 fps & Play back @16 CIF 4x4, provision for min. 12TB internal storage capacity, ports for RJ45, HDMI, VGA, DVI, Serial, USB, KVM complete with VMS server software for Client & operator control.
1
-
-
... More
Supplying, Installing, Testing and commissioning of internal 4TB SATA HDD for NVR storage
1
-
-
... More
Supplying, installing, testing & commissiong of FULLY MANAGED & loaded Layer 2 switch, 10 ports, PoE 8 RJ45 ports 10/100/1000 + 2 SFP having 20 Gbps / 4.9 Mpps, with device management licensed software, with key features of performance, Management, Security, Multicating, standard image, 141W, U rack mount, commercial LAN etc.
1
-
-
... More
Supplying of Wall bracket mounted 40” screen size Professional LED TV Screen connected to workstation, 1920x1280 Full HD,16:9 aspect ratio, 350 nits, 5000:1 contrast, 178 H/V, Ports-2xHDMI, USB, Analog audio / video, RF, RS232C In/ Out, Narrow Bezel, 2*5W speakers, stereo input / output with remote with batteries.
1
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (For Telephone, DATA & CCTV). b) 25 mm
300
-
-
... More
Supplying and fixing 6U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/ exit cutouts and lockable toughened glass front door. (Dimension- DxWXH - 450X550X367 mm) as per specification in approved manner.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements