Goa Tourism Development Corporation Limited Tender
View complete overview of Goa GTDC Tender
Costs
EMD
₹ 5,16,801Document Cost
₹ 15,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GTDCL_17687_1Bid Award Id
ViewTender No
GTDC/PC/EE/2024-25/e-25Tender Authority
Goa Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork in excavation for foundation pipeline trenches by mechanical/mannual means in all type of strata comprising any of the materials such as soil, silt, sand, clay, gravels, moorum of all varieties, shingles, pebbles, all types of conglomerates, all types of laterite rock, soft rock, disintegrated rock, fissured/ shattered/ decomposed rock or weathered rock and all such other materials as described under appendix to these specifications whether in full or in parts as the case may be adopting any approved method or methods as may be convenient or permitted inclusive of chiselling, wedging etc. in all conditions such as dry, moist, saturated, submerged, foul conditions etc. blasting prohibited including pumping or bailing out water including segregating the excavated earth/rock and disposal of surplus excavated earth at contractors identified site at risk and cost of the contractor) for all leads and lifts and as directed by Engineer .
314
-
-
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
1213
-
-
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. a. Sand
22
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
441
-
-
Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in partition walls size of blocks (30 x 20 x 10)
32
-
-
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level
110
-
-
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level
Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
136
-
-
Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)
6
-
-
Providing, laying in position, line & level minimum 75mm thick using Patradevi type exposed laterite stone (350x300x160mm) of strength not less than 70 kg/cm2. cladding work ( machine cut edges/Hand dressed for wall lining etc. backing filled with a grout of 12mm cement mortar 1:4 (1 cement : 4 fine sand) including ruled pointing in white cement mortar 1:2(1 cement : 2 fine sand) with an admixture of pigment matching the stone shade brought to line and level. Including scaffolding as directed by the Engineer-in-charge,curing etc complete.
38
-
-
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a. All works upto plinth level
283
-
-
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: b. In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
7
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) a. All works upto plinth level
32
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) b. In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
6
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) c. In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
18
-
-
Reinforced cement concrete work 1:1½:3 (1 cement: 1½ coarse sand: 3 granitic or basaltic stone aggreate 20mm nominal size excluding plastering and cost of centering, shuttering & reinforcement, in sloping or battering surface (slabs, beams, louvers, etc) i) Where inclination to the horizontal does not exceed 30°
13
-
-
Centering & shuttering including Strutting, Propping & removal of forms for : i. Foundations, Footings, Bases for columns
252
-
-
Centering & shuttering including Strutting, Propping & removal of forms for : iii. Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
93
-
-
Centering & shuttering including Strutting, Propping & removal of forms for : iv. Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
168
-
-
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates i. Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only
70
-
-
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates iv. Cornices & Mouldings
100
-
-
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
100
-
-
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
6840
-
-
Providing & fixing M.S grill of required pattern of windows with M.S flat square or round bars with provision for anchor fastning including the cost of welding etc complete as directed by Engineer-In-Charge
639
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
8872
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.).
1289
-
-
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
450
-
-
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
196
-
-
Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. a. 140 mm nominal size
116
-
-
Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion. b. Single socketed pipe 110 mm dia
116
-
-
Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent
80
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. d. Second class matti wood
0.25
-
-
Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws: b. Second class Indian teak wood
10
-
-
Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete a. 300 x 16 mm
8
-
-
Providing and fixing bright finished brass door latch with necessary screws etc complete a. 300x 16 x 5 mm
4
-
-
Providing and fixing BRASS ALDROP 10" X16 MM ANTIQUE FINISH with necessary screws etc complete
including all tools, plants, labour and materials, leads, lifts etc complete. as as per the manufacturers specifications and directed by Engineer-In-Charge.
4
-
-
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
4
-
-
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. a. 250 x 10 mm
4
-
-
Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
8
-
-
Wood Finish Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system, with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) along with printed matt having wooden textures, used along with UV Resistant resin to give the clear wooden texture on the door. The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam) The shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) Technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
shutter thickness b) 35mm
4
-
-
FRP (Fiber Reinforced Polymer) Frames with Wood Finish
Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.
Specified Cross Section
b) 4” x 2”
10
-
-
Providing and fixing of aluminium window with 3 tracks and 2 shutters sliding window with tobular frame ployster powder if thicness 75-80 microns with approved standard accessaries such as ball beaing rollers, concealed lock, 6mm thick plain clear glass with EPDM beading etc.
38
-
-
Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
3
-
-
Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a. 20 mm thick.
324
-
-
Jaisalmer stone flooring with 18mm thick polished Jaisalmer stone over 20mm (average) thick base of CM 1:4 (1 cement : 4 Coarse sand) with joints finished flush
70
-
-
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
26
-
-
Providing and fixing vitrified glossy finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
10
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm a. Jet Black
101
-
-
Providing and fixing of 18mm thick Mirror Finish Cat Eye Granite slab for urinal partitions with cement etc complete including rounding and polishing of the edges as directed by Engineer-in-Charge
1.2
-
-
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
25
-
-
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. b. Wall Ceramic Glazed Tiles : 300 x 450
150
-
-
Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. c. 60mm thick with Yellow/ Orange/ Earth colour (M35 grade)
1078
-
-
6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)
71
-
-
12mm cement plaster 1:4 (1 cement : 4 coarse sand)
412
-
-
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
1089
-
-
Neat Cement punning
172
-
-
18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand)
1 meter long, 1 cm wide
190
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
1089
-
-
Finishing wall with superior quality waterproofing cement paint (super snow hem or equivalent) of required shade on new work (three or more coats) to give an even shade.
1089
-
-
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
1427
-
-
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
1427
-
-
Painting (two or more coats) with black anticorrosive bitumastic paint of approved brand and manufacture on new work to give an even shade.
1427
-
-
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
333
-
-
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
333
-
-
Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. b. Orissa pattern W.C. pan
2
-
-
Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required. a. W.C. pan with white plastic seat and lid
2
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. b. Range of two urinal basin with 10 litres pvc. Automatic flushing
1
-
-
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. a. Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.
10
-
-
Providing & fixing (4’) 100 mm S.S grating for gully floor or nahni trap.
11
-
-
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws. b. 600x20 MM SIZE
4
-
-
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
6
-
-
Providing and fixing ball valve (brass) of approved quality : b. Low pressure with copper. floats
2. 20mm nominal bore
2
-
-
Providing and fixing ball valve (brass) of approved quality : b. Low pressure with copper. floats
3. 25mm nominal bore
7
-
-
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: c. 45 cm (18”) length .
5
-
-
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c. 1000 lit. capacity
2
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b. 150 x 100 mm size –P or S type
5
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 11/2:3 mix (1 cement: 1 1/2 coarse sand : 3 graded stone aggregate 20mm nominal size foundation concrete 1: 11/2:3 mix (1 cemet:1 1/2 coarse sand :8 graded stone aggregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. b. Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
2
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 11/2:3 mix (1 cement: 1 1/2 coarse sand : 3 graded stone aggregate 20mm nominal size foundation concrete 1: 11/2:3 mix (1 cemet:1 1/2 coarse sand :8 graded stone aggregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. d. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
4
-
-
Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.
2
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed a. 110 mm dia
70
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed b. 75 mm dia
70
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a. 110 mm dia
10
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b. 75 mm dia
10
-
-
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a. 100 mm dia
10
-
-
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : b. 75 mm dia
10
-
-
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: a. 100 mm dia
10
-
-
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: b. 75 mm dia.
10
-
-
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : a. 110 mm dia
10
-
-
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : b. 75 mm dia
10
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : b. 75 mm dia
11
-
-
Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : a. 110 mm dia
100
-
-
Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : a. 75 mm dia
100
-
-
Providing and fixing R.P.V.C. vent cowl b. 75 mm dia
2
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 a. 15mm nominal bore
3
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flange of approved make. Confirming to IS 8931;1993 a. 15mm dia nominal bore
4
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 a. 15mm nominal bore
4
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
2
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).
e. 40 mm outer dia CPVC pipe
50
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a. 15 mm dia nominal outer dia pipes.
50
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. b. 20 mm dia nominal outer dia pipes.
80
-
-
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) c. 25 mm nominal outer dia pipes.
80
-
-
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
8
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. b. Overall size 610mmx460mm (24"x18") bowl size 560mmx410mmx215mm (22"x16"x81/2") Glossy. 1.0mm thk,
2
-
-
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
4
-
-
Providing & fixing 15 mm C.P. brass pillar tap wall mounted with wall flange of first quality chrome. JAGUAR or equivelant etc. complete
2
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
11
-
-
Providing & fixing angular stop cock with wall flange of 20 mm dia bore without tap. Of first quality chrome. JAGUAR FLR-5053N or equivelant etc. complete
11
-
-
Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead.
12
-
-
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
17
-
-
Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead
100
-
-
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.
33
-
-
Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead.
95
-
-
Carraigeway and Disposal of unserviceable building material, Laterite stone, demolished concrete, excavated earth upto a lead of 15 kms from the site of execution by means of tipper truck including loading, unloading and dumping/stacking as directed by Engineer -in-charge.
659
-
-
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. a. Size 30 cm L x 50 cm H x 15 cm T
321
-
-
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. b. Size 900 x 400 x 100 mm with steel reinforcement not
less than 5.0 kgs per unit -12 T capacity
278
-
-
Providing and Installating of Synthetic wood and G.I with powder coating
WITH BACKREST
LENGTH X HEIGHT X WIDTH 60'' X 38'' X 20'' POWDER COATED FINISH
including foundation, holding down bolts, grouting etc complete as directed by Engineer-in-charge.
10
-
-
Providing and fixing statues (Lion statue 3D view) made up of POP of size 3.45ft x 4ft including all fitting fixtures , Finish should be similar to the photo features references,concepts of historic era's including all tools, plants, labour and materials, leads, lifts etc complete. as directed by Engineer-In-Charge.
2
-
-
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a. Pre-construction
323
-
-
Fixing metal aggregate katka of 75mm width at junctions of wall/beam/slab with CM 1:4 after chasing/ preparing the surface including, curing, all leads and lifts etc. complete
200
-
-
Providing, Installating and commissioning weather proof, shock proof Arihant or equivalent make Double Arc Swing using Galvanized Steel, Pure Polyester, Nylon, Natural Rubber & finished with metal colours/roto colours/FRP colours with following details Product Size: 3.2m X 1.5m
Play Area: 4.2m X 2.5m
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning weather prrof, shock proof Arihant or equivalent make of Animal Merry Go Round using Galvanized Steel, Pure Polyester, Fibre Glass, Rotaional Moulding finished with metal colours/roto colours/FRP colours with following details Product Size: 2.1m Dia
Play Area: 3.1m Dia
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning Arihant or equivalent make Multi Seater See-Saw using Galvanized Steel, Pure Polyester, Nylon, Rotaional Moulded Plastic finished with metal colours/roto colours/FRP colours with following details Product Size: 0.5m X 3.0m
Play Area: 1.5m X 4.0m
including concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning of Arihant or equivalent make Jumbo Spring Rider using Galvanized Steel, Pure Polyester, Fiber reinforced Plastic, Spring Steel finished with metal colours/roto colours/FRP colours with following details Product Size: 1.0m X 0.5m
Play Area: 2.0m X 1.5m
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning of Arihant or equivalent make Duck Spring Rider using Galvanized Steel, Pure Polyester, Fiber reinforced Plastic, Spring Steel finished with metal colours/roto colours/FRP colours with following details Product Size: 1.0m X 0.5m
Play Area: 2.0m X 1.5m
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning of Arihant or equivalent make Hopper Spring Rider using Galvanized Steel, Pure Polyester, Fiber reinforced Plastic, Spring Steel finished with metal colours/roto colours/FRP colours with following details Product Size: 1.0m X 0.5m
Play Area: 2.0m X 1.5m
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Providing, Installating and commissioning of Arihant or equivalent make Pony Spring Rider using Galvanized Steel, Pure Polyester, Fiber reinforced Plastic, Spring Steel finished with metal colours/roto colours/FRP colours with following details Product Size: 1.0m X 0.5m
Play Area: 2.0m X 1.5m
including Concrete foundation, holding down bolts, grouting with PCC of ratio (1:2:4) etc complete with One year Warranty as directed by Engineer-in-charge.
2
-
-
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
388
-
-
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
388
-
-
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with
water and leveling (cost of supplying earth and sludge of manure and mixing excluded).
388
-
-
Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm. as per MORTH Specification 307
776
-
-
Maintenance of lawns or Turfing of slopes(rough grassing) for a period of one year including watering etc. as per MORTH Specification 307
776
-
-
Electrical Works
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.
Group C -- with Cat A Modular Accessories
67
-
-
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.
43
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. ( For light points to be used in non residential buildings)
Cat A
14
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.Cat A
11
-
-
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required
Cat A
4
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required.
2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire (20mm Conduit)
770
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent surface/ recessed PVC conduit of appropriate size as required.
2 x 4 sq.mm + 1 x 4 sq.mm earth wire (20mm Conduit)
470
-
-
Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
CAT A
8
-
-
Supply, Erection, Testing & Commissioning of LED bulb including holder and other accesories to be monutented on wall with 8 to 10 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.
7
-
-
Supply, Erection, Testing & Commissioning of LED Tube Light including accesories required to be monutented on wall or ceiling with 20 W LED WW luminaire.with required Driver of hawels, K-Lite, cropton, bajaj, wipro or equivalet approved by Engineer - in - Charge complete as required.
57
-
-
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)
(h) 16 way double door Cat A
4
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the
existing MCB DB complete with connections testing and commissioning etc as required.
(a) SP, Cat A
84
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
(e) TPN, Cat A
4
-
-
Supply and Installation of 3 meter height pole made of hot dipped galvanised (60 micron minimum) for effective corrosion resistance, mild steel material, Primered and PU painted factory Finished. The column must have a hinged flush door at the bottom with proper strengthening to the cutout of the door opening. A junction/ looping box with 32 Amps heavy duty connector shall be built in to the pole and with provision of SP MCB, provided with a base plate and one set (4 Nos.) of SS J-bolts, and suitable for mounting of IP65 LED luminaire 40-45 Watts with die cast aluminium housing of IK 08.of Neri, Crompton, Bajaj Make or equivalent make subjected to approval of sample by engineer in charge Exclusive of MCB and 3c 2.5 sq mm wire from MCB to Fitting
40
-
-
Supply ,Installation Testing , Commissioning 40-50 W light fixture of IP65, 4730 System Lumens, 4000k LED including constant current driver with short circuit and overvltage protection and surge protection upto 4KV, of Neri or Bajaj or crompton or phhylips Make or equivalent make subjected to approval of sample by engineer in charge and with other required accesories. Exclusive of MCB and 3c 2.5 sq mm wire from MCB to Fitting
40
-
-
Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN incoming and outgoing MCCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete (Street light Pillar)
2
-
-
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
3 1/2 Core 35 sq.mm
200
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
4 Core 10 sq.mm
645
-
-
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
3 Core 2.5 sq.mm
160
-
-
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
(2) 3 1/2 x 35 Sq. mm.
4
-
-
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
(4) 4 x 10 Sq. mm.
86
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
(1) 3 x 1.5/2.5 Sq. mm.
80
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
(a) In soily strata
645
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.
(b) In soily strata
200
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
20
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
20
-
-
Supplying of HDPE pipes at store or site of work including loading unloading, stacking , transit insurance etc complete bearing ISI mark & conforming to IS: 4984-1995 & made frm PE 100 resin
outer dia in mm 75
20
-
-
Conveying carefully from stack at site, 250 m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for PVC / HDPE complete in all respect as per the direction of the engineer incharge
b) 75 mm OD
20
-
-
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode
26
-
-
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
260
-
-
Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment.
2
-
-
Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.
(b) 10 to 40 A
2
-
-
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required
645
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements