Goa Tourism Development Corporation Limited Tender

b)All types of Ordinary rock including all types of laterite rock, blasting prohibited.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth.

Centering & shuttering including Strutting, Propping & removal of forms for : i) Foundations, Footings, Bases for columns

iii)Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)

iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

viii) Arches, domes, vaults upto 6.00 span

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) a) All works upto plinth level

b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level

c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

supplying and fixing Pre-cast cement concrete kerb stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. c) Size 60 cm L x45 cm H x 15 cm T

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. a) Jet Black

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. (a) 60 mm thick in all colours except grey (M35 grade)

b)60 mm thick in Grey colour (M35 grade)

Providing & laying of minimun 80mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 and above grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant. 1) Size: 210mm x 150mm x 80mm thick (Type: Rectangular Type Pavers) a) Grey Colour

b) Other Colours

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. Complete

Dismantling steelwork in single sections in R.S., joists including dismembering and stacking within 50 mts. Lead

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Disposal of unserviceable material such as buiding rubbish,wood,earth excavated rock etc for all leads and lifts beyond 50m, Upto 5km

Supplying of Cast Iron & FRP benches made up of Cast Iron frames and FRP strip connected to the fram with GI nut bold and GI clamp etc. complete fitting length 5ft.

ELECTRICAL WORKS

Supply, installation, testing and commissioning of Architectural designed Pole of 3mtr Height Post top pole made of galvanised iron sections of 114mm & 60mm dia. This architecturally designed pole is structurally sound. Windspeed considered in design 50m/s, IS875:PART 3:1987•Material for tubes steel of grade YST210.•Material for base plate steel of grade E250 to IS2062; 2011. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the inbuilt box should have a flush door of suitable size with Allenkey locking on bothside. The Decorative pole will be mounted on a square base plate of size 200X200mm having 10mm thickness. The base plate shall have 4 hole suitable for M16/450 foundation bolts ensuring firm grouting in the specially designed RCC foundation. The galvanized zinc coat should not be less than 65+/ 10microns. The Galvanised pole should be painted in 3layer coating (Coating thickness should not be than 80microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint with overall 100 +/- 10 microns. Including Foundation bolts, FRP connectors and MCB Preferred Make:- Suncity/Kesslac/ Bajaj/k-lite/Havells as required and directed by the engineer incharge

Supply, installation testing and commissioning of 7 M Octagonal Pole with 3 MM thickness, Top-70 MM, Bottom- 130 MM, Base Plate- 200x200x12 MM, PCD 200MM. ( With all Accessories like Std 1 M singlr arm Bracket & Foundation Bolts M20X 600 MM ) Make:-RR ISPAT CONSOUL/Translite/Suncity/Havells/Bajaj/K-lite as required and directed by the engineer incharge.

Supply installation testing and commissioning of 15 W Updown lighter Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.0.95 with THD10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab.Make:- Havells/ Wipro/ Phillips/legaro/Bajaj as required and directed by engineer incharge

Supply installation testing and commissioning of 30 W Flood Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.0.95 with THD10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab.Make:- Wipro/Philips/Havells/Legaro/Bajaj as required and directed by engineer incharge

Supply installation testing and commissioning of 7 W Spot light COB IP65 Light with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.0.95 with THD10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj as required and directed by engineer incharge

Supply installation testing and commissioning of 40W decorative luminaire made of spun aluminium body withpressure die-cast heat management (PDCHM) and the IP65 opticalcompartment with high power LED/s is comprised of a deep drawnchemically polished and co-extruded, thermoformed polycarbonate protectorstabilized agent UV rays suitable for 50W LED. Fitting shall be Post topmounting type fixture. System Wattage: 50W LED, Protection class:IP65,Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency:50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to+50deg C, single phase ac supply.● light Source : Bridegelux, LEDLumens:6000lm, CRI(Ra):80, LED Colour Temperature: 4000K, LifeSpan:59,000 Hours,, ● Physical Body: Die cast Aluminium Base, BodySpun Aluminium, Diffuser: Convex Type Translucent / V TranslucentPolycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: PowderCoated Black, ●Driver Power Factor:0.95, THD:7.8%,Surge Protection:4KV, Efficiency:87%. Fitting should have inbuilt driver with efficiency 0.9and having surge protection device of 4KVA and external surge protectiondevice of 10KVA make Philips. LED's of Osram & Driver to be of makePhilips. LM79-2019 report to be provided.(Preferred Make:- Suncity/K-lite /Wipro/Bajaj/Havells/Phillips/Legaro as required and directed by engineer incharge)

Supply, Installation, Testing, Commissioning of LED Street light fitting of 70 W,including lamp, with PF 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium Complete with all required accessories Of make Bajaj, wipro, havells,K-Lite, Legero as required and directed by engineer incharge.

SITC of IP: 66/IP:67 PVC Junction Box having the Facility to house 4 way Bakellite strip for connection to the spike light.(Make:- Hensel)

Supplying and fixing of following sizes of rigid PVCconduit alongwith accessories in surface(medium)/recess(heavy) including cuttingthe wall and making good the same in case of recessed conduit as required. A) 20mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 core 2.5 sq.m

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 1) 3 1/2 Core 25 sq.m

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4) 4 Core 10 sq.m

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4) 3 Core 10 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. a) In Soily strata.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. A) (1) 3 1/2 x 25 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4) (4) 4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 1) (1) 3 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 3 x 10 Sq. mm.

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). (b) In rocky strata

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required

Providing and laying earth connection from earth lectrode with 6 SWG dia GI wire in 15 mm dia GI pipe from earth electrode as required

Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)Main L.T Panel .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD INCOMER:- MCCB 63 A F.P 36 Ka with Adj. Thermal & Adj. magnetic release with Extendable ROH Icu=Ics=100%(With Electrical Interlocking)(01 Nos) Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(100 Amps ) and MCB Strip of suitable size as Required.(01 Nos)Outgiung:- M.C.B F.P 16 A 10 Ka"C Curve(06 Nos), M.C.B D.P 6 A 10 Ka"C Curve(07 Nos)Size of wiring for CTS:- 2.5 sqmm Size of wiring for voltage sensing Metering :-4.0 Sq.mm Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSHHinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire . The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc. Gland Plates to be 3.0 mm Thick.

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. b) 25 mm Dia.

Providing and fixing quartar turn pillar tap 15 mm dia etc. complete.