Goa Tourism Development Corporation Limited Tender
View complete overview of Goa GTDC Tender
Costs
EMD
₹ 40,53,100Document Cost
₹ 30,000Tender Fee
₹ 4,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_GTDCL_4691_1Bid Award Id
ViewTender No
GTDC/PC/EE(S)/2022-23/e-08Tender Authority
Goa Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer .
20383
-
-
... More
Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. a) Ordinary soil
15000
-
-
... More
Supplying and filling fine Moorum in plinth under floors, trenches including watering ramming consolidating, dressing, complete. Moorum
295
-
-
... More
Carting away unwanted excavated material such as soil, lime, moorum, building rubbish, laterite stone, Excavated earth, ordinary rock etc. from site lead of 10km including all loading & unloading charges ( A ) ( by mechnaical Automative Transport ) Contractor should arrange land for dispose up these material at his own cost Lead upto 5 km.
6043
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
5426
-
-
... More
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and superstructure
2169
-
-
... More
Half brick masonry using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/cm2. a) Above plinth upto floor V level 200 x 95 x 95
534
-
-
... More
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All work up to Plinth level
2424
-
-
... More
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
613
-
-
... More
Providing and laying up to floor 5 level cement concrete 1 : 2 : 4 ( 1 Cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces ,cement mortar 1:3 ( 1 cement : 3 fine sand ) including centering and shuttering etc. in a) Kerbs, steps and the like at or near ground level
91
-
-
... More
Providing and laying up to floor 5 level cement concrete 1 : 2 : 4 ( 1 Cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces ,cement mortar 1:3 ( 1 cement : 3 fine sand ) including centering and shuttering etc. in b) string courses ,coping ,bed plate,anchor block,plain window sills and the like.
13
-
-
... More
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level a) M-30grade of concrete Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level a) M-30grade of concrete
3147
-
-
... More
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level a) M-30grade of concrete Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level a) M-35grade of concrete
315
-
-
... More
Extra for concrete work in superstructure above floor five level for each four floors or part thereof.
23
-
-
... More
Extra for laying concrete in or under water & or liquid mud including cost of pumping and bailing out water and removing slush etc. complete. * Per cu.m per m depth
113
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for a) Foundation, footings, bases of columns
2913
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for b) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
4930
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for c) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
4827
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for d)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
12094
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for d) Suspended floors, roofs, landings, shelves & their supports
1279
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates for a)Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only
2786
-
-
... More
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
551
-
-
... More
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of
surrounding concrete in the structural member.
318286
-
-
... More
Boring providing and installing boared cast-in-situ reinforced cement concrete pile for below mentioned pile sizes and upto 24 m length in all types of strata socketed in hard rock as specified by Engineer , vertically true to line and form including all operations for removal of slush, all kinds of strata, percolating water and bentonite slurry circulation, placing and lifting casing as required, & placing of reinforcement and providing & laying reinforced cement concrete of grade M35(Mix Design) with coarse sand and graded granitic and basaltic aggregate 20mm nominal size as per mix design with treimie pipe as directed by Engineer excluding the cost of reinforcement. Payable length shall be measured from pile cut-off to the founding level as per IS 2911 as directed by Engineer. No Extra cost to be paid to contractor for using of Hydraulic Rig
480
-
-
... More
Chipping / Demolition of of all required dia. R.C.C. Piles , taking care not to damage the balance RCC of piles including disposal of debris including straightening and bending of the exposed reinforcement of pile in to the pile cap position as directed by Engineer.
36
-
-
... More
Conducting low strain pile integrity test on R.C. bored pile foundations of all required dia. R.C.C. Piles using pile integrity tester equipment conforming to ASTM - 5882 as directed by Engineer including submission of test reports etc. complete.
24
-
-
... More
Conducting initial dynamic load upto 2 times the safe load as per relevant code on R.C. bored pile foundations of all required dia. R.C.C. Piles. The charges shall include removing loose concrete preparing the pile cap top for load test etc. all complete as per design drawing and as directed.
2
-
-
... More
Conducting routine static load test upto 2.5 times on R.C. bored pile foundations of all required dia. R.C.C. Piles. Safe load as directed and preparing reports therein, providing all equipments, personnel etc. by conventional method including and removal an direction thereafter from the site conforming to IS 2911 (Part IV) 1985 and amendments thereof and relevant clauses of tender specifications. (The charges for providing RCC bored cast in situ test pile of required length shall be paid in relevant item).
1
-
-
... More
Providing placing and Driving in position 6mm thick mild steel liner for below mentioned dia. R.C.C. Piles casing upto required depth including fabrication , cutting the mild steel sheet to required diameter and shape , welding the joints and driving with the help of required machineries,fitting with necessary cutting edge and setting out subsequently, welding the chain of liner casing with applying one coat of primer & two coat of red oxide primer external & internal surfaces before lowering the casing & driving the same including all materials labours and lifts etc. complete as directed by the Engineer in charge.
576
-
-
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.a) In R.S. Joists
689
-
-
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. b) In tees, angles, flats and channels
33
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
27846
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1399
-
-
... More
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
665
-
-
... More
Providing and fixing M.S. plain grill of required pattern in Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws with applying a priming coat of approved steel primer .
780
-
-
... More
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete a) 600x 600 mm Dark Shades
847
-
-
... More
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. a) 600 x 600 mm - Dark Shades
27
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 600
1742
-
-
... More
Providing and laying Rectified and vitrified Antiskid finish decorative type flooring tiles of size 600 mm x 600 mm and 10 mm thick having water absorption within 0.1% to 0.5% and conforming to IS Code 15622 of approved make, shade and pattern for flooring in required position laid on 20mm thk cement mortar 1:4 (1cement: 4 coarse sand) including neat cement float, grouting, filling joints with cement slurry, curing and cleaning etc. complete. ( Price Range Rs. 600 to Rs.700 Per Sq.M )
389
-
-
... More
Providing and laying approved flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer.
( Price range 1600 to 1700Rs per Sq Mtr.)
1188
-
-
... More
Providing and laying Polished Granite stone flooring, coping in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rounded off nosing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. ( Price range 1550 to 1600 Rs per Sq Mtr.)
41
-
-
... More
Providing & fixing 18 mm thk Flame Finish Granite Tread Tiles in single piece in Approved make and colour with rounded off nosing, antiskid groove laid on 20 mm (average) thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) with neat cement slurry including pointing with pigmented cement slurry to match the shade of slab, cleaning etc. complete. ( Price range 2000 to 2100 Rs per Sq Mtr.)
40
-
-
... More
Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete a) Jet Black
22
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. a) 60 mm thick in all colours except grey (M35 grade)
247
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. b) 60 mm thick in Grey colour (M35 grade)
577
-
-
... More
Providing and laying 25 mm shahabad stone flooring over 25 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) laid over with grey cement slurry mixed with pigment, including. Rubbing and polishing complete.
3785
-
-
... More
Providing and laying 60 mm thick reflective type open jointed (Grass) paver block of minimum compressive strength of 400 kg/sqcm in unipaver shape of approved make. The rates are inclusive of providing & laying/spreading approved quality average 50 mm thick sand bedding including compaction & filling joints with sand at site. all complete as per specifications, drawing as per the direction of Engineer.
200
-
-
... More
Supplying and fixing Pre-cast cement concrete kerb-stones of size 30 cm L x 50 cm H x 15 cm T (factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.
500
-
-
... More
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete a) 20 mm thick.
8874
-
-
... More
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete b) Kotah stone slab flooring over 20 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm(average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounded off nosing rubbing & polishing complete.
226
-
-
... More
Providing & fixing Granite Cobbles of approved size in100x100x 60 mm thk & Colour on with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.
23
-
-
... More
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
59
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm. a) Jet Black
187
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
53
-
-
... More
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a) Pre-construction
1777
-
-
... More
Cleaning the surface and filling cracks (if any), applying epoxy putty wherever necessary, Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
227
-
-
... More
Providing and fixing waterproofing treatment to sanitary blocks consisting of layers of Laterite stone coba of 75 mm thick in cement mortar 1:2 sand witched between two layers of cement mortar 1:4 (20 mm thick ) mixed with water proofing compound, top finishing coat of cement slurry 6 to 12 mm thick with water proofing compound etc. complete with 32 mm dia PVC pressure relief pipe of adequate length including waterproofing treatment to 750 mm height (maximum) of side wall, and bottom surface in cement mortar 1:4 with waterproofing compound and covering 10 years guarantee on court fee stamp of Rs. 100 with ponding test including all lead, lift etc. complete as directed by Engineer.
155
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixedwith water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.
284
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.
691
-
-
... More
Providing & fixing Asphalt shingles in approved colour and pattern for roof and ridge over 10mm thk bison boardwith APP waterproofing membrane including all fixing arrangements such as screwing etc complete and ensuring water tightening.
471
-
-
... More
Providing and laying 1st class mangalore tile roof covering with 25 x 50mm (1"x2") jamba wood or similar battens ( Square Hollow Bars of 25 mm) including nails etc.,but excluding rafters.
1180
-
-
... More
Providing & Laying the ridge tiles laid dry and pointed with lime mortar 1:2 (1 lime:2 surkhi).
116
-
-
... More
Providing & fixing 50 mm thk marine plywood work in frames of doors using 19mm +19 mm +12 mm marine ply (waterproof) finished with 1 mm approved laminate, all hardware,and other frames and fixed in position with required fastners, adhesive etc. complete as specified as shown in the drawings.
109
-
-
... More
Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws , plugs and priming coat on unexposed surfaces etc. 50x12mm size.
289
-
-
... More
Providing and fixing block board flush door shutters 35mm thick ( 1st Class Teak ply on both faces), laminated on both sides with 1mm thick laminate of approved brand and colour including cost of Adhesive, Nails, screws during fixing etc. complete.
101
-
-
... More
Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation
42
-
-
... More
Providing and fixing bright finished brass door latch with necessary screws etc complete b)250x16x5 mm
58
-
-
... More
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete Size 125 x 70 x 4.0mm
126
-
-
... More
Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
50
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete a) 250 x 10 mm
61
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete b) 150 x 10 mm
81
-
-
... More
Providing and fixing anodized aluminum ventilators (including frame and shutter ) with three partitions with 5 mm thick approved clear float glass in one partition, Exhaust opening in one partition & 6 mm thk glass louvers in one partition with using weight and size of section not less then as specified or as shown in drawing ,locking arrangement,silicon sealant ,EPDM gaskets, including all aluminum fixture and fittings etc. complete . All gaps between civil work and aluminium frames shall be sealed and made watertight by applying silicone sealant.Rectangular tube @0.478kg/m
42
-
-
... More
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows. c) Figured glass
26
-
-
... More
Providing and filling joints between concrete and masonry wherever specified in cement mortar including raking the joints to form "V" groove, applying neat cement slurry, filling with aggregate of 20 mm or less (Katka) in cement mortar 1:4 (1 cement : 4 fine sand), cleaning and curing etc. to avoid cracks at the joints.
1522
-
-
... More
Drilling 150 mm deep hole in R C C and grouting the rebar with lockfix etc complete. A) 10 mm Dia
62
-
-
... More
Drilling 150 mm deep hole in R C C and grouting the rebar with lockfix etc complete. B) 12 mm Dia
51
-
-
... More
Providing and fixing GI hexagonal chicken wire mesh 22 gauge size of 20cm wide at the junction of dissimilar surface of brick / block masonry wall and RCC column/ beam and the like including necessary "U" nails for fixing , overlapping etc. complete as per specification and as directed by Engineer for all floors and at all height.
343
-
-
... More
Providing and fixing in position two tracks , two numbers of glass shutters Aluminium sliding window with pure ployster powder of thickness 75-80 microns with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter,good quality hardware and accessories like GI screws,Virgin PVC ,gaskets, Imported rollers , Concealed locks, silicon sealant on the periphery, etc complete including 6 mm thick plain glass with all required screws and nuts etc, complete.
55
-
-
... More
Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory Accessories: i) S. S. Hinges 4” - 3 Nos, ii) S. S. Latch - 1 No, iii) Tower Bolt 5” - 2 Nos, iv) Handle 5” - 2 Nos, a) 35mm
121
-
-
... More
12 mm thick cement plaster 1:4 (1 cement:4 fine sand)
5949
-
-
... More
6mm thick cement plaster to ceiling with 1:3 (1 cement : 3 fine sand)
941
-
-
... More
Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand)
12282
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
8859
-
-
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
8859
-
-
... More
Providing and applying Synthetic elastomeric coating cum paint of reputed make such as Polysafe or equivalent conforming to relevant IS specification ready to use for bridge structures in saline atmosphere as to avoid salt concentration from marine environment, ultra- violet effects of the sun rays, fungus development and to protect the reinforcement from marine atmoshpheric effects in 3 coats including sand blasting, cleaning the concrete surfaces brushing and applying the polymerbased chemical coating with PRIMER, 1ST COAT and SECOND COAT at an interval of 24 hrs in approved shade and colour including scaffolding etc. (as directed by the Engineer-in- charge) complete with 5 yrs guarantee).
138
-
-
... More
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
1826
-
-
... More
White washing with whiting on new work ( three or more coats) to give an even shade.
3276
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
4612
-
-
... More
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2469
-
-
... More
Demolishing cement concrete 1:4:8 or leaner mix including disposal of material within 50 m lead
29
-
-
... More
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
413
-
-
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
850
-
-
... More
Supplying and fixing in position factory made Pre-cast RCC boundary stones confirming to IRC-25-1967 in concrete grade of M-20 with 20 mm nominal size granitic/basaltic aggregate compacted by means of mechanical vibrator in a smooth form of finish and 6mm dia bars in five no.s. stirrups and two number inverted 'U' size bars etc. complete (Excavation, bed concrete to be paid seperately) Circular 150 mm dia at top 200 mm dia at base and 900 m length.
350
-
-
... More
Designing ,fabricating ,supplying ,erecting and installing imported tensile fabric with necessery structural designed members with Jindal / TATA, steel built -up tubular trusses or as required including hoisting ,fixing in position and applying two coatsof approved superquality anti-corrosive paint of approved brand with 2-coats of primer etc.complete The Tensile fabric of weight not less than 900GSM, PVDF,Lacquer coated on both side of Make FERRARI 902 Which including cutting welding and cables ,plates and necessaery hardware for fixing the fabric as per approved shape as per drawing , memberane shall be cut and manufactured etc complete as directed by Engineer-in-charge. a) Design structure - Umbrella
150
-
-
... More
Designing ,fabricating ,supplying ,erecting and installing imported tensile fabric with necessery structural designed members with Jindal / TATA, steel built -up tubular trusses or as required including hoisting ,fixing in position and applying two coatsof approved superquality anti-corrosive paint of approved brand with 2-coats of primer etc.complete The Tensile fabric of weight not less than 900GSM, PVDF,Lacquer coated on both side of Make FERRARI 902 Which including cutting welding and cables ,plates and necessaery hardware for fixing the fabric as per approved shape as per drawing , memberane shall be cut and manufactured etc complete as directed by Engineer-in-charge. b) Umbrella structure
125
-
-
... More
Skylight - Danpalon Or Equivalent Day light Panel System: Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panels shall be uniform in color with an integral Microcell core. In a cross section, the core shall be constructed of tight cells with 6 walls. Panels will be supplied with Vertical Standing Seam at both sides of the panel Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability & shall be of same color as that of panel for aesthetic appeal. NOTE : Necessary Steel structure to be provided by the Steel fabricator. Skylights framework to be raised by by 200 mm from Roof Pan level.
23
-
-
... More
Providing and fixing 12 mm thk plain cementitious Board of approved sizes fixed on vertical as well on horizontal on MS Fabrication Work at spacing of 1.2 m c/c with anchor bolt, fastners , clip, screws etc. as per drawing and details complete ( MS tube to be paid seperately as per relevant item)
105
-
-
... More
Proving and laying 120 microns waterproof plastic film/sheet as per IS 14611-1998 as a separation/slip membrane laid flat without creases and with minimum overlap of 200mm at joints, nailed to underneath Plain Cement concrete, if required as directed.
8096
-
-
... More
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a) Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity
375
-
-
... More
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. b) Size 700 x 500 x 75 mm with steel reinforcemnt not less than 3.0 kgs per unit
300
-
-
... More
Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge a) 110 mm dia
270
-
-
... More
Providing and placing in position 16 gauge stainless steel Pole mountan dust bin 50 ltr. 2 Container of grade 304 cylindrical with cover and fixed concrete platform , size (300mm dia x 600mm ht) Pole stand Hight - 1.2 m. All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer.
15
-
-
... More
Providing & fixing in position signage's made from 4 mm thick aluminium composite panel. The background of the panel should be pasted in retro reflective material, computerized cut, self adhesive film pasted on it. The board is to be fixed on wall with 12mm dia SS studs /mirror screws or mounted on 1 or 2 numbers of 2" dia GI pipe at specifeid height having a coat of metal primer with 2 or 3 coats of black enamel paint to get the required finish. Script for naming should be in English and Devnagri complete. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
24
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects and Department engineer incharge. a) Dustbin in single piece of Ht. 0.75m in FRP as per tender drawing
35
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects and Department engineer incharge. b) Tribal and Artisan Village
600
-
-
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
30
-
-
... More
Providing and fixing Ball bearings for rolling shutters
4
-
-
... More
Providing and fixing pre-fabricated Double leaf compound gate with outer frame 120 X60 mm Box section with 16mm bright square bars scroll of 16 X 8 mm flat with aldrop tower – built , cover plate and bearing including providing 450 mm height 300 mm width motifs of M S plate 4 mm thick and locking arrangement, pintals and hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction of Engineer including transportation and loading , unloading charges etc complete.
1080
-
-
... More
Supply , Installation and Testing of trackless and Battery Operated Train having Below mentioned specifications. Technical Specification - a) Engine 20 HP capacity , No. of bogies - 1 Locomotive + 2 bogies, Engine size - L-3M x1.5M x 2.5M , Bogies size- L-3.5m x 1.1m x 2.5m , Capacity 40 person , Suspension - spring with anti vibration suspension, charge gauge , hour meter,UPS, key ignition switch ,artificial smoke , dual horn , fire extinguisher, LED dome light , head lights real view mirror , hydraulic brakes ,brass Horn and operate throttle control lever.etc All the materials shall be of approved make. All works complete as per the specification and satisfactory of the Architects and Department engineer incharge.
1
-
-
... More
Supply ,Installation,Testing & Commisioning of Musical Fountain of approved make and asper specification mentioned in the annexxure enclosed in tender document .As per theme and concept approved by Engineer incharge .
1
-
-
... More
Providing and Placing Lockers at Lockers room including following items(1)Brass Door Handle (2)Door Hanging Hook(3) Door Lock of approved brand and quality with all accessories, Locker (base) etc. complete as per directions of Engineer-in -Charge. Lockers of Godrej & boyce mfg.co.ltd or equivalent make.
60
-
-
... More
PVC false ceiling grid type : Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO- 9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing.
235
-
-
... More
Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal joints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)
957
-
-
... More
Excavation for roadway over areas of all type strata comprising of all type of strata comprising of any type of material such as soil,silt,clay,sand,gravel,murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock, ordinary rocks,hard rocks, disintegrated rocks ,fissured/s hattered rocks, decomposed rocks, weathered rocks and all such materials either in full or part as the case may be adopting any method/methods as may be convenient or permitted ( blasting prohibited ) including chiseling , wedging, etc , in all conditions such as dry , moist ,foul, saturated , submerged ,etc. , as directed by the Engineer etc., all complete , trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads up to 1000 metres as per MORTH Specification 301 Earth work including pumping and bailing out water ,barricading,danger lighting ,guarding as directed .
856
-
-
... More
Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .
685
-
-
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.as per MORTH Specification 404 By Manual Means Grade - ll
228
-
-
... More
Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.
2283
-
-
... More
Providing and laying dense graded bituminious macadam with 40-60 TPH Drum Mix type HMP producing an average output of 50 tonne per hour using crushed aggregates of specified grading, premixed with bituminious binder by specified percentage of weight of total mix and filler, transporting the hotmix to work site, with all leads laying with a hydrostatic /hydraulic paver finisher with sensor to control the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction using antistripping agent complete as per MoRT&H Specifications Clause 507 Grade-II (19mm nominal size) Bitumen @ 5% of weight of mix Antistripping agent @ 0.5% of bitumen content
228
-
-
... More
Providing and laying 30 mm thick Bituminious/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified gradings Premixed with bituminious binder at 6.5 % by weight of total mix and filler using Antistripping agent transporting the hotmix to work site with all leads and applying a tack coat @f 2.00 kg/10sq.m. with hot bitumen of 80/100 and laying with hydrostatic/hydraulic power finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MORT&H specifications clause 509 and 503 Antistripping agent @ 0.5% of bitumen content
2283
-
-
... More
Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. Bitumen 80/100@ 0.375 kg/sq.m
2283
-
-
... More
Providing and applying primer coat with bitumen or bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per MoRT&H specifications clause 502 Bitumen 80/100 @ 1.00 kg/sq.m.
2283
-
-
... More
Provision of Hump type speed breakers for general traffic at preferred crossing speed of 25 km/h and above as per standard having and specification in IRC 99-1998. The speed breakers shall be formed by placing hotmixed dense bituminious macadam and a layer of asphaltic concrete carpet (hot mix) after thesurface is indented and tack coat applied to the location where required. a) For General traffic upto 25 Kmph (3.70m wide per Meter)
90
-
-
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and freefrom streaks and holes as per MORTH Specification 803
148
-
-
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately as per MORTH specification 202 a) By Mechanical Means : Bituminious courses
188
-
-
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately as per MORTH specification 202 b) By Manual means : Granular courses
188
-
-
... More
Supplying and stacking of good earth ( Garden Soil) at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
315
-
-
... More
Rough dressing the trenched ground including breaking clods.
7
-
-
... More
Fine dressing the trenched ground.
7
-
-
... More
Spreading of sludge, dung manure or/and good earth (Garden Soil) in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
385
-
-
... More
Supply at site of work/store deoiled Neem cake duly packed in used gunny bags as per MoRT & H Specification 308.2
1
-
-
... More
Supplying of sludge duly stacked at site/store as per MoRT & H Specification 308.2
70
-
-
... More
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded).
140
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;- Saccolabium speciosum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Arachnis species
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Ascocentrum ampullaceaum auranticum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Ascocentrum ampullaceaum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattaleya hybrids dark pink
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattaleya mini hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattaleya orange hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattaleya white hybrid
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattaleya yellow hybrid
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattleya bowringiana
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattleya hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cattleya pink hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cymbidium finlaysonianum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Cymbidium hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium Fimbriatum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium nobile
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium nobile hybrids
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium parishii
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium phalaenopsis sonia
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Dendrobium pieredii, Limodorum aphyllum
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Epidendrum ibaguense purpurea
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Epidendrum radicans
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Habenaria susnannae
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Haemaria discolor dawsoniana
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Oncidium grower ramsey
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Paphiopedilum insigne
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Paphiopedilum species
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phaius tankervilleae
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phalaenopsis hybrids assorted
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phalaenopsis hybrids spotted
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phalaenopsis hybrids striped
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phalaenopsis hybrids white
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Phalaenopsis hybrids yellow
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Rynchostylis gigentia
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Rynchostylis gigentia alba
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Spathoglottis plicata
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Vanda tessellata
20
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation.Aerides maculosum;-Vanilla fragrans
20
-
-
... More
Grassing with Selection One Lawn including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar lawn in case of death of any portion.
700
-
-
... More
Supplying Pots of mentioned sizes as per seleaction for planting trees and plant as per the directions of Engineer-In-Charge in charge c) Type E- Decorative 600MM Dia X 450H MM
760
-
-
... More
Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. a) W.C. pan with white plastic seat and lid.
36
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
36
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS8931:1993 15mm nominal bore.
40
-
-
... More
Providing and fixing toilet paper holder : a) C.P. brass
40
-
-
... More
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. b) Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.
9
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
62
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin a) One urinal basin with 5 litres p .v .c. Automatic flushing cistern.
34
-
-
... More
Providing and fixing approved make circular below/under counter Wash hand basin - white vitreous china of size 440 x 440 mm including 15 mm C.P. brass pillar taps , 32 mm C.P.Waste coupling, PVC flexible pipe inlet connection and C.P.Wall Flange complete with necessary bolts, bents, tees, brass screws including cutting of granite, making holes in the wall if required and making the surface good to the satisfaction of Engineer.
53
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. a) Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
4
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock with extended lever handle and wall flange Confirming to IS 8931; 1993 15mm nominal bore
4
-
-
... More
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws a) Plastic container
10
-
-
... More
Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.a) Long pan pattern W. C. Pan
30
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore
54
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 a) Wall mixer with 115 mm long bend pipe for connection to over head shower.
2
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: a) 150 mm Diameter
2
-
-
... More
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws a) 750 x 20 mm size
2
-
-
... More
Providing and fixing Grab Bar (JAQUAR) – 600mm long (for handicap toilet)
10
-
-
... More
Providing and fixing Grab Bar (JAQUAR) – 300mm long (for handicap toilet)
10
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110mm
6
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : b) 75mm
80
-
-
... More
Providing & fixing Stainless steel with perforated/plan grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete.perforated/plan cover for wash basins, shower, sinks,etc. - Top grating Size in mm - 100 x 100 a) 110mm
6
-
-
... More
Providing & fixing Stainless steel with perforated/plan grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete.perforated/plan cover for wash basins, shower, sinks,etc. - Top grating Size in mm - 100 x 100 b) 75mm
80
-
-
... More
Providing and fixing Angular Stop Cock with wall Flangue - Jaquar make. (a)Florentine (FLR-5053N) 15mm of approved quality.
59
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a) 15 mm outer dia CPVC pipe
227
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. b) 20 mm outer dia CPVC pipe
122
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. c) 25 mm outer dia CPVC pipe
125
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. d) 32 mm outer dia CPVC pipe
84
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) a) 20mm outer dia.
10
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) b) 25mm outer dia.
119
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) c) 32mm outer dia.
90
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) d) 40mm outer dia.
290
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) e) 50mm outer dia.
291
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) f) 63mm outer dia.
315
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) g) 80mm outer dia.
137
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-40(blue)/(white) h) 110mm outer dia.
15
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-80(blue)/(white) a) 50mm outer dia.
30
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-80(blue)/(white) b) 80mm outer dia.
255
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.SCH-80(blue)/(white) c) 110mm outer dia.
210
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) a) 15mm nominal bore
5
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) b) 20 mm nominal bore .
3
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) c) 25 mm nominal bore .
10
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) d) 32 mm nominal bore .
15
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) e) 40 mm nominal bore .
7
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) f) 50 mm nominal bore .
14
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) g) 65 mm nominal bore .
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming to IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/ IS:13095. TYPE P.N. 1.6 (Class B)Dia in mm a) 80
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming to IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/ IS:13095. TYPE P.N. 1.6 (Class B)Dia in mm b) 100
2
-
-
... More
Providing and fixing ball valve ( brass ) of approved quality (Low pressure with copper floats) brass ball valve with copper floats a) 50 mm nominal bore
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A) a) 50 mm nominal bore
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A) b) 100 mm nominal bore
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve similar to Glen field fig H4 or similar with steel ferrule at inlet screwed suitable to working pressure of 10kg/sq.cm. (Class B) Dia in mm a) 25
6
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve similar to Glen field fig H4 or similar with steel ferrule at inlet screwed suitable to working pressure of 10kg/sq.cm. (Class B) Dia in mm b) 40
2
-
-
... More
Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20mm and 10kg/sq. cm for 25mm to 50mm,complete,as directed by the engineer in-charge,of following sizes. Nominal diamter in mm. a) 25
6
-
-
... More
Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20mm and 10kg/sq. cm for 25mm to 50mm,complete,as directed by the engineer in-charge,of following sizes. Nominal diamter in mm. b) 40
2
-
-
... More
Supply of Strainer/Dirt Box with m.s. body and SS mesh suitable for flanged connections in installation of Bulk water meters C.I. Strainer 'Y' type with screwed ends. A)50
1
-
-
... More
Supply of Strainer/Dirt Box with m.s. body and SS mesh suitable for flanged connections in installation of Bulk water meters C.I. Strainer 'Y' type with screwed ends. B) 100
1
-
-
... More
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opeing of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² Sizes in mmC.I. Stainer 'T' (Basket) type with flanged ends a) 50
2
-
-
... More
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opeing of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² Sizes in mmC.I. Stainer 'T' (Basket) type with flanged ends c) 100
2
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm (a) 40 mm dia.
2
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm (b) 50mm dia.
2
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm(c) 65 mm dia.
4
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm(d) 80 mm dia.
4
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm(e) 100 mm dia.
5
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm(f) 150 mm dia.
4
-
-
... More
Supplying 600 x 600 mm Square Composite Resin Manhole Cover of Approved Brand Light Duty Confirming to relevant grade designation : A 15 as per En – 124 : 1994 Complete. ( Inspection Shall be done as per guidelines of EN -124 : 1994) (For UGWT, OHWT & STP Storage tank) Weight - 5 T a) Size - 600 x 600 mm Square
8
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc). complete (single/double) socket-ed : a) 110mm dia
208
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc). complete (single/double) socket-ed : b) 75mm dia
297
-
-
... More
Providing,laying and fixing P.V.C.pipe of 40mm dia.withfittings such as bends,tees,reducers,clamps,etc.includingnecessary excavation,trenchfillingetc.complete.Including removin gexisting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
143
-
-
... More
Providing,laying and fixing P.V.C.pipe of 50mm dia.with fittings such as bends,tees,reducers,clamps,etc.includingnecessary excavation,trenchfillingetc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
10
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. A) 110mm
60
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. B) 75mm
85
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a) 110mm
30
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : b) 75 mm
22
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :a) 110mm
8
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :b) 75mm
8
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door a) 110mm
13
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door b) 75mm
16
-
-
... More
Providing and fixing R.P.V.C. vent cowl: a) 110mm
13
-
-
... More
Providing and fixing R.P.V.C. vent cowl: b)75mm
15
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.NP2 Class a) 150
703
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.NP2 Class b) 200
150
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.NP2 Class c) 250
230
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.NP2 Class d) 300
160
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.NP2 Class e) 450
600
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm a) 150
703
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm b) 200
150
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm c) 250
230
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm d) 300
160
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm e) 450
600
-
-
... More
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete : a) 100 mm diameter.
22
-
-
... More
Providing and fixing square mouth S.W. gully trap grade 'A" complete with C.I. Grading brick masonry chamber and water light C.I. cover with frame 300x300mm size (inside) the weight of the cover to be not less than 4.53kg and frame to be not less than 2.72kg as per standard design. a) 150 mmx 100mm P or S.type
19
-
-
... More
Construction of brick masonry chamber 60x45x100 cm with brick work of class designation 40kg/sq. cm of 23 cms wall thickness in 1:5 cement mortar (1cement : 3coarse sand)with necessary excavation in foundation rubble soling , pcc in foundation of 15 & 10 cm thk respectively benching ,haunching , in cement concrete 1:2:4 (1 cement :2 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and external plaster of 18 mm cement plaster in two coats under layer 12 mm thickcement plaster 1 : 5 (1 cement :5 coarse sand) and top layer 6mm thick in cement plaster 1:3 (1 cement :3 coarse sand) all other materials and labour as per details above)
40
-
-
... More
Composite Manhole Covers / Inspection Chambers with Frame GRATING WITH FRAME ( HINGED ) Supplying 450 X 600 mm Rectangular Composite Resin Manhole Cover of Approved Brand Light Duty Confirming to relevant grade designation : A 15 as per En – 124 : 1994 Complete. ( Inspection Shall be done as per guidelines of EN -124 : 1994) Weight - 5 T Size - 450 X 600 mm Rectangular
40
-
-
... More
Construction of masonry chamber 60x60x75cm inside in laterite masonary in neatly dressed stones complete with 23 cms wall thickness and in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves 50 to 80mm with necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour and as per details below) a) with C.I. Surface box 200mm top dia 300mm bottom dia and 300 mm deep of wt 32kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size)
20
-
-
... More
Construction of masonry chamber 90x90x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm, 120 mm 150 mm and 200mm dia with necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and
inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation, cost of surface cover and all other materials and labour and as per details below) a) with C.I. cover and frame 600mm x600mm weighing not less than 250 kgs in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size)
5
-
-
... More
Add or deduct for every 0.10 m depth or part thereof for brick masonry chamber. A) 60cm x60cmx75cm
15
-
-
... More
Add or deduct for every 0.10 m depth or part thereof for brick masonry chamber. B) 90cm x90cmx100cm
10
-
-
... More
Construction of brick masonry chamber 90x60x100 cm with brick work of class designation 40kg/sq. cm of 23 cms wall thickness in cement mortar 1:5 (1cement : 5coarse sand)with necessary excavation in foundation rubble soling, pcc in foundation of 15 & 10 cm thk respectively benching ,haunching , in cement concrete 1:2:4 (1 cement :2 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete and external plaster of 18 mm cement plaster in two coats under layer 12 mm thickcement plaster 1 : 5 (1 cement :5 coarse sand) and top layer 6mm thick in cement plaster 1:3 (1 cement :3 coarse
sand) all other materials and labour as per details above)
25
-
-
... More
Supplying 600 x 900 mm Rectangle Composite Resin Manhole Cover of Approved Brand , Light Duty Confirming to relevant grade designation : A 15 as per En – 124 : 1994 Complete. ( Inspection Shall be done as per guidelines of EN -124 : 1994) Weight-5 T Size - 600 x 900 mm Rectangle
10
-
-
... More
Supplying 600 x 900 mm Rectangle Composite Resin Manhole Cover of Approved Brand , Medium Duty Confirming to relevant grade designation : B125 as per En – 124 : 1994 Complete. ( Inspection Shall be done as per guidelines of EN -124 : 1994) Weight - 12.5 T Size - 600 x 900 mm Rectangle
15
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
20
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. b) Inside size 1.2m x 90 cm and 90cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg. (weight of cover 58 kg).
20
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.Supply 500mm dia SFRC cover consisting of cast iron frame of 12mm thick having four prizing slots and cover embedded in 12mm thick cast iron ring suiting to fit into the frame.0.90m dia(b) 1.50m deep
21
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.Supply 500mm dia SFRC cover consisting of cast iron frame of 12mm thick having four prizing slots and cover embedded in 12mm thick cast iron ring suiting to fit into the frame. 1.20m dia(a) 1.50m deep
11
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.Supply 500mm dia SFRC cover consisting of cast iron frame of 12mm thick having four prizing slots and cover embedded in 12mm thick cast iron ring suiting to fit into the frame. 1.20m dia (b) 2.00m deep
5
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.Supply 500mm dia SFRC cover consisting of cast iron frame of 12mm thick having four prizing slots and cover embedded in 12mm thick cast iron ring suiting to fit into the frame. 1.20m dia(c) 2.50m deep
4
-
-
... More
Add extra for conical brick masonry manhole for fractional depth of each one centimetre or part thereof for 0.90m dia manhole
300
-
-
... More
Add extra for conical brick masonry manhole for fractional depth of each one centimetre or part thereof for1.2m dia manhole
200
-
-
... More
Providing M.S. footrests including fixing in manholes with 20 x 20 x 10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 x 20 mm square or round bar
100
-
-
... More
Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres/hr and storage capacity 120 litres with partially stainless steel body complete. specification no. AP-WCR/WC
6
-
-
... More
Supply of inferential, dry dial, type Domestic Water Meter,suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatable for automatic reading system ,conforming to IS:779-1974 and ISO 4064-2005 standards and bearing EEC/MID/OIML mark, (with latest Amendments)along with test certificate from FCRI/NABL as desired by the department.f) 50 mm
1
-
-
... More
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
1
-
-
... More
Supplying & Fixing Prefabricated Water Treatment plant of 68 kld with opearting 8 hours of operating
1
-
-
... More
Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. Supply.
6
-
-
... More
Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 36 to 18 m and discharge from 400 to 1000
Itrs. per minute (Max efficiency at 29 m head & 680 Itr discharge) & pipe of Suction 75 mm/Delivery 65 mmdiameter erected with necessary H type clamps as per specification no. WP-OSP (1w+1s)
1
-
-
... More
Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 70 to 250 LPM discharge at 44 to 24 m head & (max.
efficiency at 38 m head & 160 lpm) discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification no. WP-SMP (1W+1S)
1
-
-
... More
Supplying & Fixing Sewage Treatment plant based ON MBBR based sytem 65 kld with opearting 24 hours,with preatrement which includes screening,oil & grease trap,equliasation tank,secondary treatment which inlides bilogical treatment ,tube settler & disinfecation with ozonation and sludge disposal sytem,Tertiary treatment as water paased through series of filters Including all necessary for MBBR system Perforated screen in MS epoxy construction Oil & grease tarp chamber, Equalisation tank, Aeration tank, Tube Setteler tank, Intermediate storage tank Air blower with motor, diffuser membrane & associated equipments Sewage transfer pumps – Self priming, non clog, centrifugal , Filter feed pumpair diffusion system for Bio reactor, MBBR media for bioreactor Tube media for Tube settler, Poly dosing system, Chlorine dosing system Electrical panel & equipment, Pressure sand filter, Activated Carbon filter, Ozonation, Interconnecting pipe & fitting, etc
1
-
-
... More
Providing, Fixing, Testing & Commissioning of Spray Pou-up Sprinkler, Nozzle, Disc Filter,Drippers pumps, including all necessary fittings, labours all taxes if any etc.
1
-
-
... More
Supplying & erecting Dewatering Submersible pump set 415V, 3 phase, 50C/s, A.C. supply of 5.5KW/ 7.5 H.P., of 6 to 22 m head with 1560 to 360 LPM discharge, non-clogging minimised abrasive wear, large impeller clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber,. etc. complete as per specification no. DWP- SMP(1W+1S)
1
-
-
... More
ProvidingandfixingH.D.PcontainerSyntexoralikeonepiecemouldedwatertankmadeoutoflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestinationhoistingandfixingofaccessoriessuchasinlet,outletoverflowofalltankscapacityabove1000 to 20,000 litres (3000liters)
5
-
-
... More
ELECTRICALS WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group B -- with Cat A Modular Accessories
246
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
97
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the (with) independent recessed PVC conduit(heavy) of appropriate size as required. a) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
258
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the (with) independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
209
-
-
... More
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.
79
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required b) 5/6 A switch Cat A
214
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required(d) 3 pin 5/6 A socket outlet Cat A
148
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as requiredb) 15/16 A switch Cat A
99
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required d) 6 pin 15/16 A socket outlet Cat A
99
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required a) Cat A
73
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A
49
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (b) 4 Module ( 125 mm x 7 mm) Cat A
52
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module (200mm x 75 mm) Cat A
36
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (d) 8 Module ( 125 mm x 125 mm) Cat A
33
-
-
... More
SITC of integral Post top lantern fixtures (Pole Light) 45W complete with all necessary accessories on provided pole /bracket as complete.
200
-
-
... More
SITC of integral Single Arm Pole Light 30 W complete with all necessary accessories on provided pole /bracket as complete.
200
-
-
... More
SITC of LED Bollard of 10 W complete with all necessary accessories having height of 900mm .
200
-
-
... More
SITC of LED concealed type foot / step light with aluminium body for outdoor application (IP-65) suitable for upto 6-10W LED including driver and erecting by making necessary arrangement/ recess in wall to make it flush with surface .
65
-
-
... More
SITC of LED Tree up-lighter with aluminium housing body for outdoor application (IP65) suitable for upto 8-10W LED including driver and making necessary arrangement for fixing complete as required.
80
-
-
... More
SITC of LED Column up-down lighter with aluminium housing body for outdoor application (IP-65) suitable for upto 2x10W LED including driver and making necessary arrangement for fixing complete as required .
60
-
-
... More
SITC of integral Decorative Pendant Light 30-35 W complete with all necessary accessories complete as required.
100
-
-
... More
SITC of LED Flood light fitting of 150W, including lamp, with PF 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as required.
2
-
-
... More
SITC of LED Flood light fitting suitable for above 90W lamp, including lamp, with PF 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as required.
2
-
-
... More
SITC of LED Street light fitting suitable for above 75W to 90W lamp, including lamp, with PF 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as required.
3
-
-
... More
SITC of LED Column down lighter with aluminium housing body for outdoor application (IP65) suitable for upto 2x10W LED including driver and making necessary arrangement for fixing complete as required.
30
-
-
... More
SITC of 3 m high galvanised conical pole with foundation bolts having bottom dia. from 105 to 115 mm, top dia. from 65 to 75 mm on provided foundation with.
400
-
-
... More
SITC of 4.5 m high galvanised conical pole with foundation bolts having bottom dia. from 125 to 145 mm, top dia. from 65 to 75 mm on provided foundation.
4
-
-
... More
SITC of 6 m high galvanised conical pole with Street Light bracket suitable for Single Arm lighting fixture mounting arrangement & foundation bolts having bottom dia. from 135 to 160 mm, top dia. from 65 to 75 mm on provided foundation.
30
-
-
... More
SITC of 6 m high galvanised conical pole with Street Light bracket suitable for Double Arm lighting fixture mounting arrangement & foundation bolts having bottom dia. from 135 to 160 mm, top dia. from 65 to 75 mm on provided foundation.
18
-
-
... More
Supplying and erecting 20 m (clear height) High Mast (Top- 150mm, Bottom- 410mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation.
1
-
-
... More
SITC of SOLAR LED Street light fitting suitable for above 75W to 90W lamp, including lamp, with PF 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as required.
58
-
-
... More
SITC of 24W LED Tubelight fitting(1200mm) suitable for Surface/ Wall mounting with all required accessories .
39
-
-
... More
SITC of 24W LED Tubelight fitting(1200mm) suitable for suspended mounting with hanging rod and all required accessories.
7
-
-
... More
SITC of 8W Surface/Recessed LED downlighter with calmps ,driver and all required accessories with 2 years warrenty
26
-
-
... More
SITC of 18W Surface/Recessed LED downlighter with calmps ,driver and all required accessories.
138
-
-
... More
SITC of 9W LED Mirror light with all required accessories with 2 years warrenty
7
-
-
... More
SITC of 10W Surface/Recessed LED downlighter with calmps ,driver and all required accessories.
35
-
-
... More
SITC of 10W LED Tubelight fitting(600mm) suitable for Surface/ Wall mounting with all required accessories .
3
-
-
... More
SITC of 24W Surface/Recessed LED downlighter with calmps ,driver and all required accessories.
5
-
-
... More
SITC of 30W LED Hanging/Pendant LED fitting suitable for suspended mounting with hanging rod and all required accessories.
6
-
-
... More
SITC of 12W Surface/Recessed LED downlighter with calmps ,driver and all required accessories.
27
-
-
... More
Supply installation testing commisioning of outdoor type, 11 KV 3-way RMU ,2-load break switches 630 Amps,1- Vacuum circuit breaker with over current and earth fault self powered relay with digital display,630 Amps,11KV CT ratio:(As suitable for upto 1000 KVA transformer),21 KA for 3 secs.etc.
1
-
-
... More
Supplying, erecting, testing, commissioning of 11 KV H.T. metering cubical (Outdoor type) approved by GED/licensee fabricated with 2mm (14 swg) m.s. sheets with supporting angle and channel, painted with powder coating/ Marine PU coated paint copper bus bar size 25x6 mm, heavy duty mechanical lock, top side cover (CTPT cover) interlock with meter doors, epoxy coated required No. (as specified by GED) CT having required ratio between 5/5A TO 100/5A BURDEN 10 VA CLASS 0.5S, I.L.12/28/75 KVP epoxy terminal block including tri-vector meter with duly tested Electronic TVM / TOD Meter of appropriate Class and accuracy as per GED requirements and required number of suitable rating point (as specified by GED), and provision for incoming and outgoing cables,insul coating etc. complete; duly tested by licensee with necessary test certificates and erected on provided plinth/ c.c. foundation
2
-
-
... More
Supply Installation, testing and commissioning of Main LT Panels comprising below points. 1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end. 9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner. 8)All Starters are according to Type-II Cordination Refer Single Line Diagram.Incoming-1 no. Grid Side.-FP 630 A- MCCB-36kA, LSIg Protection with indication lamps.1 no.DG Side-FP 630 A -MCCB-36KA with LSIg Protection with indication lamps.With Electrical & Mechanical interlocking.1 no.-4 pole - 630A ATS with Controller.Bus-bar 415V,TPN,50Hz,630 A Al Busbar (1st Section – Grid Side)415V,TPN,50Hz,630 A Al Busbar (2nd Section )Outgoing 1 no.-TP+N 250 A-MCCB-36 kA with LSI Protection.3 no.-TP+N 100 A-MCCB-36 kA with LSI Protection.1 no.-TP+N 50 A-MCCB-36 kA with LSI Protection.5 no.-TP+N 63 A-MCCB-36 kA with LSI Protection.1 no.-TP+N 250 A-MCCB-36 kA with LSI Protection
1
-
-
... More
Feeder Pillar 1-Supply Installation, testing and commissioning of Feedar Pillar Panel-1 comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.8)All Starters are according to Type-II Cordination Refer Single Line Diagram.9)-Timer (ASTRONOMICAL) controller with contactor.Incoming-1 no. Grid Side.-FP 250 A- MCCB-36kA, LSIg Protection with indication lamps Bus-bar 415V,TPN,50Hz,250 A Al Busbar (1st Section – Grid Side) Outgoing-4 no.-TP+N 32 A-MCB-16 kA with LSI Protection. 12 no.-TP+N 16 A-MCB-16 kA with LSI Protection.2 no.-TP+N 25 A-MCB-16 kA with LSI Protection.10 no.-TP+N 10 A-MCB-16 kA with LSI Protection
1
-
-
... More
Feeder Pillar 2-Supply Installation, testing and commissioning of Feedar Pillar Panel-2 comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections.2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.8)All Starters are according to Type-II Cordination Refer Single Line Diagram.9)-Timer (ASTRONOMICAL) controller with contactor. Incoming-1 no. Grid Side.-FP 50 A- MCCB-36kA, LSIg Protection with indication lamps.Bus-bar,415V,TPN,50Hz,50 A Al Busbar (1st Section – Grid Side)Outgoing-6 no.-TP+N 16 A-MCB-16 kA with LSI Protection.2 no.-TP+N 25 A-MCB-16 kA with LSI Protection.4 no.-TP+N 10 A-MCB-16 kA with LSI Protection.
1
-
-
... More
Feeder Pillar 3-Supply Installation, testing and commissioning of Feedar Pillar Panel-3 comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections.2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.8)All Starters are according to Type-II Cordination Refer Single Line Diagram.9)-Timer (ASTRONOMICAL) controller with contactor. Incoming-1 no. Grid Side.-FP 100 A- MCCB-36kA, LSIg Protection with indication lamps.Bus-bar.415V,TPN,50Hz,100 A Al Busbar (1st Section – Grid Side) Outgoing-6 no.-TP+N 32 A-MCB-16 kA with LSI Protection.23 no.-TP+N 16 A-MCB-16 kA with LSI Protection.5 no.-TP+N 10 A-MCB-16 kA with LSI Protection
1
-
-
... More
Feeder Pillar 4-Supply Installation, testing and commissioning of Feedar Pillar Panel-4 comprising below points.1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections.2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.8)All Starters are according to Type-II Cordination Refer Single Line Diagram.9)-Timer (ASTRONOMICAL) controller with contactor.Incoming-1 no. Grid Side.-FP 100 A- MCCB-36kA, LSIg Protection with indication lamps.Bus-bar.415V,TPN,50Hz,100 A Al Busbar (1st Section – Grid Side) Outgoing- 2 no.-TP+N 25 A-MCB-16 kA with LSI Protection.2 no.-TP+N 32 A-MCB-16 kA with LSI Protection.15 no.-TP+N 16 A-MCB-16 kA with LSI Protection.
6 no.-TP+N 10 A-MCB-16 kA with LSI Protection.
1
-
-
... More
Feeder Pillar 5-Supply Installation, testing and commissioning of Feedar Pillar Panel-5 comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections.2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.8)All Starters are according to Type-II Cordination Refer Single Line Diagram.9)-Timer (ASTRONOMICAL) controller with contactor.Incoming-1 no. Grid Side.-FP 100 A- MCCB-36kA, LSIg Protection with indication lamps.Bus-bar.415V,TPN,50Hz,100 A Al Busbar (1st Section – Grid Side)Outgoing-3 no.-TP+N 32 A-MCB-16 kA with LSI Protection.21 no.-TP+N 16 A-MCB-16 kA with LSI Protection.9 no.-TP+N 10 A-MCB-16 kA with LSI Protection
1
-
-
... More
Transformer-Supplying ,installation ,testing and commissioning of Outdoor type compact substation with 315 kVA, 3 phase, 50 Hz., ONAN type, thermal class K10, 21kA for 3 Sec. SF6 insulated non-extensible compact switchgear (type DVNE/ RT2-NE) consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm aluminium unarmorured XLPE cable. Copper wound transformer 315 kVA 11 kV/433V Dyn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, without conservator type of design & top normal porcelain bushings for HT & LT with off load tap switch of rating +5% to -10% @2.5%.temp rise - oil/winding 40/45°C losses (subject to IS 1180 energy efficiency level 2 - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-630 amps aluminium busbar (100% for phase and 50% for neutral, current density – 1 amp/sqmm) with outgoings 500-630 A 433V 4P 50Hz 35 kA ICOG fixed manual type moulded case circuit breaker (MCCB) with microprocessor based release for overload , short circuit & earth fault protection., multifunctional meter with class 1.0 accuracy with RS 485 port, RYB, ON/OFF trip indications, outdoor enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder /colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x150 sq.mm XLPE aluminium single core cable. interconnection between transformer & LT switchgear using aluminium busbars. internal earthling connections by using 50x6 mm GI strips including transformer neutral, complete with necessary permissions of Electrical Inspector as per specification
1
-
-
... More
Supplying, erecting and commissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self-excited, self-regulated, screen protected alternator
with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternatordirect coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, with required batteries ,battery charger ,indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, Deisel storage tank,provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector .(including stack with height Building height + 2.5 meters above the height of nearby building )
1
-
-
... More
Suplly installation testing and commisioning of Microprocessor based AMF Panel suitable for 320kVA DG Set with required Switchgears and Power contactors,Safety controls etc..
1
-
-
... More
Provided pair of duly tested rubber hand gloves as per IS:340715 suitable for working on 11kV supply
4
-
-
... More
Supply ,Installation,Testing & Commisioning of printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
8
-
-
... More
Supply of round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside withFIRE Mark, on provided stand/ wall hook.
8
-
-
... More
Supply of floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.
2
-
-
... More
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
2
-
-
... More
Supply ,Installation,Testing & Commisioning of PVC Synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 & CPRI tested having 3mm thickness upto11Kv
20
-
-
... More
Supplying and erecting 125 kVAr, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP /APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC Incoming-1 no.-TP+N 250 A-25 kA MCCB Microprocessor Based, Manual Drawout, with integral LSI protection, 3x metering CTs, MFM(EM6459), R/G/A lamps,1x6A MCB.TPN, AL,250 A, 25 kA for 1 second air insulated bus bars Outgoing-50KVAR -1 Nos.(100 A TP MCCB,16 KA,TMR) & 25 KVAR - 2 Nos.(40 A TP MCCB,16 KA,TMR) 10 KVAR - 2 Nos.(16 A TP MCCB,16 KA,TMR) 5 KVAR - 1 Nos.(16 A TP MCCB,16 KA,TMR)& 100 A TP MCCB,16KA,TMR -1 Nos. Spares
1
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(a) 2 + 4 way Cat A
14
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(b) 2 + 8 way Cat A
12
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(b) 4 way (8+12), double door, Horizontal type Cat A
1
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(c) 6 way (8+18), double door, Horizontal type Cat A
2
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(d) 8 way (8+24), double door, Horizontal type Cat A
2
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A
176
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(b) SPN, Cat A
14
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A
5
-
-
... More
Supplying and fixing SP blanking plate in the existing MCB DB complete as required
5
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm
3815
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. A) 3 1/2 Core 25 sq.mm
1408
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. B) 3 1/2 Core 120 sq.mm
981
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. C) 3 1/2 Core 240 sq.mm
67
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. A) 4 Core 16 sq.mm
19036
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. B) 4 Core 25 sq.mm
1844
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(2) 3 x 4 Sq. mm.
124
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 3 1/2 x 25 Sq. mm.
8
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(2) 3 1/2 x 120 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(3) 3 1/2 x 240 Sq. mm.
8
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 4 x 16 Sq. mm.
1970
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(2) 4 x 25 Sq. mm.
30
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata
6790.33
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata
13580.67
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
5021
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
195
-
-
... More
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments.(1) 3 Core 150 sq.mm
285
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cab(a) Soily strata
285
-
-
... More
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.(a) 11 KV, 3 Core x 120 - 185 sq.mm
18
-
-
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.(a) 11 KV, 3 Core x 120 - 185 sq.mm
2
-
-
... More
Supply of cable route marker 20 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required. For HT cable.
285
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. i) Inside size 0.45x 0.45m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.45x 0.45m weighing 45kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
30
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. ii) Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing90kgs ) including fixing with cement concrete 1:2:4 ( 1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
115
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design iii) Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)
12
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised
as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. a) 80 mm Dia.NP2 Class
923
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised
as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. b) 200 mm Dia.NP2 Class
1301
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(a) 50 mm
969
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required (IP65)(a) 100 mm x 100 mm x 60 mm deep metal box
60
-
-
... More
SITC of on line UPS pure sine wave of 1kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup with rack and all required accessories
2
-
-
... More
SITC of on line UPS pure sine wave of 3 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup with rack and all required accessories
2
-
-
... More
SITC of on line UPS pure sine wave of 5kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup with rack and all required accessories
1
-
-
... More
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata
62
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately).(a) In soily strata
8
-
-
... More
Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt).
62
-
-
... More
Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
50
-
-
... More
Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required
25
-
-
... More
Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
50
-
-
... More
Supply, Installation, Testing & Commissioning of Smart Pole with single/ double arm made of hot galvanized iron and as per IS: 875 Part-3 (1987), IS 7205(1974), IS: 4759(1996), suitable for housing multiple devices like smart LED light with built-in controller, Network Gateway, Digital Billboards, Surveillance Cameras, Wi-Fi Access Points, integrated audio for public communication etc. Provision for integrated battery storage with separate internal cabling for lighting & telecom equipment’s. The price shall be inclusive of all accessories and sundry materials excluding the civil foundation.
35
-
-
... More
Dismantling the existing underground cable and reconnecting to new power source without damaging it with glands, cable end box including refilling the trench up to ground level and making coils complete.
2000
-
-
... More
Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.
5
-
-
... More
Dismantling existing pole mounted distribution transformer safely without any damages.
100
-
-
... More
HVAC WORKS
-
-
-
... More
Supply, Installation, testing and commissioning of Hi Wall type split airconditioning unit suitable to operate from 230±10% volt, 50 Hz, 1 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with inverter hermetically sealed rotary/ scroll compressor, condenser coil, propeller fans controls, control panel, Including control wiring, necessary power cable, cordless remote, M.S. frame duly painted to locate Outdoor Unit etc. The Unit should be at least 5 Star rated (on the date of procurements the minimum EER value of the units should be as per latest ECBC). The Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. The capacity guarantee should be ensured by the manufacturer. Automatic voltage stabilizers with inbuilt time delay relay to be provided. a) Minimum 1.0 TR Capacity
10
-
-
... More
Supply, Installation, testing and commissioning of Hi Wall type split airconditioning unit suitable to operate from 230±10% volt, 50 Hz, 1 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with inverter hermetically sealed rotary/ scroll compressor, condenser coil, propeller fans controls, control panel, Including control wiring, necessary power cable, cordless remote, M.S. frame duly painted to locate Outdoor Unit etc. The Unit should be at least 5 Star rated (on the date of procurements the minimum EER value of the units should be as per latest ECBC). The Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. The capacity guarantee should be ensured by the manufacturer. Automatic voltage stabilizers with inbuilt time delay relay to be provided. b) Minimum 1.5 TR Capacity
3
-
-
... More
Supply, Installation, testing & commissioning of Refrigerant copper piping of appropriate size (suction & liquid) upto 19mm dia of soft seamless copper tube of 22SWG & for above 19.1 the pipe material shall be hard seamless copper tube of 16SWG for large dia with Class 'O' 19mm thick Nitrile Foam insulation of 40-60 kg/m3 density with fixing accessories. a) Ref Pipe Ø 6.4 mm
65
-
-
... More
Supply, Installation, testing & commissioning of Refrigerant copper piping of appropriate size (suction & liquid) upto 19mm dia of soft seamless copper tube of 22SWG & for above 19.1 the pipe material shall be hard seamless copper tube of 16SWG for large dia with Class 'O' 19mm thick Nitrile Foam insulation of 40-60 kg/m3 density with fixing accessories. b) Ref Pipe Ø 12.7 mm
65
-
-
... More
Supply, Installation, testing & commissioning of uPVC Drain piping as per specification & 'U' trap. Piping shall be inclusive of require all necessary fittings, valves & properly clamped using saddle & pressure clamps etc. & with 9mm nitrile rubber insulation. (Rigid PVC conduit with PVC accessories on wall / ceiling) a) 25 mm dia PVC pipe
72
-
-
... More
Supply, Installation of Under-deck Roof insulation with Nitrile Rubber 19 mm thk Insulation material is Class ‘O’ thermal conductivity at 0 Deg. C of nitrile rubber shall not exceed 0.033 w/m K, Density of material shall be between 40 to 60 Kg/M³. Adhesive elastomeric insulation with reinforced alumium foil over the exposed insulation. VOC level should not exceed more than 50 grms/Liter. Insulation manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 (R-2.78 in 3.4" thickness) and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable).
175
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: a) Minimum 150 CFM with 5mmWC SP
72
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: b) Minimum 250 CFM with 5mmWC SP
3
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: c) Minimum 350 CFM with 5mmWC SP
7
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: d) Minimum 450 CFM with 5mmWC SP
1
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: e) Minimum 750 CFM with 10mmWC SP
1
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: f) Minimum 900 CFM with 10mmWC SP
3
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: g) Minimum 2200 CFM with 10mmWC SP
1
-
-
... More
Supplying, installation, testing & commissioning of suitable capacity of Propeller Plate type Exhaust / Fresh air fans complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings, frames, louvers and bird screen etc. As per specification of following sizes and capacity: h) Minimum 2800 CFM with 10mmWC SP
1
-
-
... More
Supply and installation of 415V/240V electronics Time switch with 32A TP MCB, 32A TP power contractors With 24Hrs ON/OFF program timer min 15minutes (Automatic) with rechargable Ni-Cad battery having Minimum 100Hrs backup, and a bypass switch, Fixing of power contactor, MCB,timer etc. On the suitable size of 3mm thick SMC sheet, fixing of SMC sheet with accessories in the suitable size of totally enclosed Weather proof FRP box with hinged door with all interconnection etc.and installed on wall flush or surface mounted with angle iron frame work etc. complete as required and as directed by engineer incharge
1
-
-
... More
Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
91
-
-
... More
LV SYSTEM WORKS
-
-
-
... More
Supplying, installing, testing and commissioning of Rack Mounted, Digital (Hybrid) type expandable EPABX in multi slot chassis or modular stackable type as per the technology complete with basic capacity of 1xPRI, 4xTCO, to cater to minimum 48 nos instruments as per manufactureres standard for Digital 8 (4 Now+4 Future), 40 SLT (30 Now+10 Future) and Operator console (1 Now) * Power supply * Expansion modules of 8/16 or 30 SLT connections, connection for operator console as per the manufacturer's standard, with necessary RJ45 connectors, for connection to MDF. DTE port for connection to PC * VPN connection port on CPU for interconnection to CPUs & sharing capacity * Voice Mail facility.
Refer Technical Specification
1
-
-
... More
Supplying, Installing, Testing & commissioning of Call Billing, EPBAX Management & Reporting software loaded on common server. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting / concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone make modules, crimping and terminations, etc. complete as required. a) '10 Pair
6
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting / concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone make modules, crimping and terminations, etc. complete as required. b) '50 Pair
1
-
-
... More
Supplying, installing, testing & commissioning push button telephone instrument desk top/ wall mount unit.
Refer Technical Specification
28
-
-
... More
Supplying, installing, testing & commissioning approved type Digital key telephone instrument. Refer Technical Specification
4
-
-
... More
Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box /surface GI /PVC Box, modular plate, punching, identifying, complete as required. a) CAT B
32
-
-
... More
Supplying and drawing / fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wall or in the existing surface / recesed steel / PVC conduit having folowing pair(s), complete as required. a) 2 Pair
1086
-
-
... More
Supplying and drawing/fixing jelly filled unarmoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. a) 10 Pair
1405
-
-
... More
Supplying of Router with built-in firewall with firewall throughput 950 Mbps, 4 nos 10/100/1000 Mbps LAN ports, 2 no 10/100/1000 Mbps WAN port, USB 2.0 port, NAT/ SPI / Website filter / MAC address filter.
Refer Technical Specification
1
-
-
... More
Supplying, Installing, Testing & Commissioning of Network Administrator Machine (Desk top) having INTEL CORE I7, 16 GB RAM, 1TB HDD, 2 GB Graphic card, 10/100/1000 NIC, Licensed Windows 10 professional 64bit & MS Office 365, 19" LCD monitor, Keyboard, Optical Mouse, DVD RW, Vertical Cabinet. Refer Technical Specification
1
-
-
... More
Supplying, Installing, Testing, commissioning of FULLY MANAGED & stackable loaded Layer 3, 24 Port- 10/100/1000 Base T + 4 Port- Combo, Non PoE switch, 92Gbps/ 68.45Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc. Refer Technical Specification
1
-
-
... More
Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 2, 24 Port- 10/100/1000 Base T + 4 Port-SFP, Non PoE switch, 17.6Gbps /13.1 Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc. Refer Technical Specification
2
-
-
... More
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/ recessed steel/ PVC conduit of appropriate size including connection, etc. complete as required. (For DATA, CCTV & Wi-Fi) a) CAT 6
10498
-
-
... More
Supplying, installing, testing & commissioning of Fiber-6 Core-OS1- Single Mode-850 nM-10 Gbps over 500 Meters, IEEE 802.3ba standard, Outdoor Campus High Availability Resilient Ring Topology, PBTP Loose Tube-9µM core-125µM cladding, Thixotropic jelly filled tube & cable, Fiber rod central member, polyster tape wrapping, Water blocking tape, single tape armoured, HDPE outer sheath, 3ply rip cord to be laid through U/G conduit/pipe from ground floor rack to adjacent buildings nodes. Refer Technical Specification
1260
-
-
... More
Supplying and fixing Light Guide Interconnect Unit with 24 port - duplex adapter LC connector adapter interface for both splicing & termination, Drawer type, 1U-19"rack, 1.2mm CRCA shelf with metal mounting ears, splice tray, winding plate, rubber cable plugs, front mounted cable saddles for jumpers, 2 fiber spools for 12 fibre 50µM MM 2M long OFC pig tails storage, complete with accessory kits comprising cable ties, spiral wrap tubes, top cover, bottom panel etc. Refer Technical Specification
8
-
-
... More
Suplying, installing, joining & connecting Fiber Pigtails 2 M Long, Multi Mode,OM3, LSZH, 50µM Corning fiber in LSZH buffer, PS ferrule, Simplex LC connector (OM3) for LIU to terminate OFC in LIU. Refer Technical Specification
32
-
-
... More
Supplying and fixing LC Duplex Adapters for OM3 cable in snap mount /screw mount on adpater interface type, ROHS compliant in approved manner. Refer Technical Specification
32
-
-
... More
Supplying and plugging Fibre Patch cord 3 M long, Multi Mode, OM3, LSZH, 50µM Corning fiber in LSZH buffer, PS ferrule, Duplex LC connector, in engineering plastic UL94V-0 & ceramic ferrule complete. Refer Technical Specification
32
-
-
... More
Supply, Installation,Test, Commission of 9/125 µM, SM OFC, Duplex LC connection,1Gbps,Single direction, 850 nm, LX SFP Transceiver, IEEE 802.3Z standard. Refer Technical Specification
16
-
-
... More
Supplying, installation and testing of suitable size modular GI box (CAT B), modular plate and cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/ surface GI/PVC Box, modular plate, punching, identifying, complete as required. (For DATA & CCTV) a) CAT B
45
-
-
... More
Supply, Installation,Testing & Commisioning of 24 port Loaded 1U Patch Panel in 1800 punch down design in SPCC cold rolled powder coated & PVC UL 94V-0 housing complete with easy snap in tool-less keystone jacks for UTP 24 AWG Cat 6 cable in provided 19" U Rack, front transparent label holder for front labelling, rear cable manager complete in ANSI/TIA/EIA-568-C.2 standard (For DATA & CCTV). Refer Technical Specification
11
-
-
... More
Supply, Installation,Testing & Commisioning of 1 meter length, UTP Patch cord-1000 Base-T, TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standard of 4 pair 24 AWG UTP Cat 6 cable PVC UL 94V-0 insulated-jacketted, 500 V AC withstand, RJ45 8P, gold plated-phosphor bronze contact socketted at both ends,type in position (For DATA & CCTV). Refer Technical Specification
109
-
-
... More
Supply, Installation,Testing & Commisioning of 2 meter length, UTP Patch cord-1000 Base T, TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standard of 4 pair 24 AWG UTP Cat 6 cable PVC UL 94V-0 insulated-jacketted, 500 V AC withstand, RJ45 8P, gold plated-phosphor bronze contact socketted at both ends,type in position (For DATA & CCTV). Refer Technical Specification
101
-
-
... More
Supply, Installation,Testing & Commisioning of UTP modular RJ 45 plug Connector, transparent polycarbonate UL94V-0 housing, suitable for 23 AWG Cat 6 cable, gold plated phosphor bronze contact (For DATA & CCTV) Refer Technical Specification
109
-
-
... More
Supplying, Installing, Testing & commissioning of 2 MP Full HD Day & Night Varifocal Indoor Dome Network Camera, 20M IR distance, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.2 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 30 FPS, H.264 video compression, verifocal lense 3.6mm- 6mm (focal length to suit location)with features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software. Refer Technical Specification
15
-
-
... More
Supplying, Installing, Testing & commissioning of 2 MP Full HD Day & Night Varifocal Outdoor Bullet Network Camera, 25M IR distance, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Motion based recording, 1/2.9" CMOS sensor, 0.05 min. lux for colour & 0.0 Lux for monochrome, 16:9 aspect, 1920x1080 , 25 / 30 FPS, H.264 video compression, verifocal lens 2.8mm-12mm (focal length to suit location)with of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, Wall/ pole mounting with all necessary acceseries with licensed software. Refer Technical Specification
40
-
-
... More
Supplying, Installing, Testing & Commissioning of 32 Channel Professional Network Video Recorder (NVR) rack mount for recording / playback / continuous / scheduled / event & motion trigger / Search / picture control, complete with all accessories & license 32 channel ONVIF, LAN 10/100/1000 connected, Recording 25 fps @ 4CIF & Play back 16 CIF 4x4, provision for min. 24TB storage capacity, ports for RJ45, HDMI, VGA, DVI, Serial, USB, KVM complete with VMS server software for Client & operator control. Refer Technical Specification
2
-
-
... More
Supplying, Installing, Testing and commissioning of internal 6TB SATA HDD for NVR storage. Refer Technical Specification
4
-
-
... More
Supplying, Installing, Testing & Commissioning of Client Viewing Machine (Desk top) with 45 camera license having INTEL CORE I7 16 GB RAM, 1TB HDD, 2 GB Graphic card, 10/100/1000 NIC, Licensed Windows 10 professional 64bit & MS Office 365, Keyboard, Optical Mouse, DVD RW, Vertical Cabinet. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing & commissiong of FULLY MANAGED & loaded Layer 2 switch, 10 ports, PoE 8 RJ45 ports 10/100/1000 + 2 ports 100/1000 SFP having 20 Gbps, with device management licensed software, with key features of performance, Management, Security, Multicating, standard image, 78W, U rack mount, commercial LAN etc. Refer Technical Specification
8
-
-
... More
Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 2 switch, 28 ports, PoE 24 RJ45 ports 10/100/1000 + 4 SFP having 56 Gbps, with device management licensed software, with key features of performance, Management, Security, Multicating, standard image, 190W, U rack mount, commercial LAN etc. Refer Technical Specification
1
-
-
... More
Supplying of Wall bracket mounted 41” screen size Professional LED TV Screen connected to workstation, 1920x1280 Full HD,16:9 aspect ratio, 350 nits, 5000:1 contrast, 178 H/V, Ports-2xHDMI, USB, Analog audio / video, RF, RS232C In/ Out, Narrow Bezel, 2*5W speakers, stereo input / output with remote with batteries. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing & commissioning complete with all accessories & Controller software controller for 50 Access Points with standard features such as Band steering, BW Optimization, Configuration, Security encryption, AP management with all features & supports. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing & commissioning complete with all accessories & software controlled outdoor omni directional antenna dual band, 2.4GHz -300 mbps (public) & 5 Ghz (internal use), 1200 Mbps on 802.11ac, 2*10/100/1000 Interface, PTP Access Point for use with Band steering, BW Optimization, Configuration, Security encryption, AP management with all features & supports. The range shall be 500 M. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing & commissioning complete with all accessories & software controlled outdoor omnidirectional antenna dual band, MU MIMO, 2.4GHz -300 mbps(public)& 5 Ghz (internal use), 1200 Mbps on 802.11ac, 2*10/100/1000 Interface, PTMP Access Point for use with Band steering, BW Optimization, Configuration, Security encryption, AP management with all features & supports. Range shall be 100 M suitable for 100 concurrent users. Refer Technical Specification
8
-
-
... More
Supplying, installing, testing and commissioning of PA system Analogue master rack mount controller EN 60849 compliant message manager with 240 W built in amplifier with external amplifier input, 6 zones 100 V output, 12 business/ emergency inputs, front & back mounted controls & indicators, 19" rack mountable in 3U size. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing and commissioning of Supervised EN 60849 compliant rack mount Router for system expansion, connected to master controller by Cat 6+ cable by loop in loop out over 1000 m loop length with front & back mounted controls & indicators, 100V inputs from amplifiers, outputs for 6 speaker zones having capability of 700 W per zone, 50 VA consumption, 12 trigger inputs, programmable super vised EMG inputs, with controls & inputs, programmable super vised EMG inputs, with controls & indications at front & back, single or dual channel operation, 19" rack mounted in 2U size. Refer Technical Specification
2
-
-
... More
Supplying, installing, testing and commissioning of 240 Watts Power Amplifier rack mount , 60 Hz-18 khz response, 4 balanced inputs / 3 stereo line inputs, S/N (flat at max. volume) 85dB, multiple outputs 4 ohm/ 8 ohm/ 70 V/ 100 V, distortion less than 1%, 1 kHz, separate bass/ treble control complete with, selectable 2- tone chime, 19" rack mounted in 2U size. Refer Technical Specification
6
-
-
... More
Supplying, installing, testing and commissioning of 6 Watt Music & speech Speaker ( with tapping for 3 Watt setting ) ceiling / recess mounted in false ceiling, with decorative aesthetic grill, 200 mm dia. speaker, 100V line matching transformer, 98 dB/1M, wide opening angle, with spring loaded mounting clamps, with 1 Sqmm speaker cable in zone with 1000 W per zone up to 700 M zone wiring. Refer Technical Specification
13
-
-
... More
Supplying, installing, testing and commissioning of 30W Cabinet type Loudspeaker with built in LMT Weatherproof, Features Built-in 100V / 70V transformer, Waterproof cabinet type loudspeaker, 5” full range speaker unit, IP66 waterproof level, Power taps15w-30w @100V, ABS enclosure and metal bracket. Description. Refer Technical Specification
49
-
-
... More
Supplying, erecting, testing and Commissioning of CD / DVD player (BGM -Background Music) system consist, FM Tuner, USB in 19" rack mounting in 1U size. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing and commissioning of 6 zone Call station with 6 zone selection keys/ all call key/ momentary PTT key having selectable gain/ speech filter/ limiter/ output level, LED lamps for zone selection/ fault/ emergency state, flexible stem unidirectional condenser microphone -GOOSE NECK, extendable by Cat 6 for additional 8 key pads by loop. Refer Technical Specification
1
-
-
... More
Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated (white PVC sheathing with colour skinning) 2 x 1.5 sq.mm FRLS copper conductor cable in existing surface/recessed steel/PVC conduit of approprriate size including connections etc. complete as required of following size. (For PA & Music system) Refer Technical Specification
4205
-
-
... More
Providing and supplying in position of wall mount, light weight, sturdy, projector screen black masking border, front white with black back, manual opened with spring loaded return 42" (W) and 24" (H) for use with LCD projector with all necessary hardware fittings, labour, complete.All the materials shall be of approved make. Refer Technical Specification
1
-
-
... More
Providing, supplying, installation, testing and commissioning in position of approved 3000 / 3400 ANSI lumens ceiling mounted LCD/ DLP Projector , Native WXGA (1,280x800) resolution. for medium room Multimedia projection, Auto power saving with brightness adjustment and lamp dimming, Long-lasting lamp, HDMI input, Digital Video input, Ideal for medium room data / video projection. Including Ceiling Mount Kit of suitable size, VGA cable, HDMI Cable with require length power cable, 1 RCA with all necessary hardware fittings, labour, complete. All material shall be of approved make. Refer Technical Specification
1
-
-
... More
Supply/ Erection/ Testing/ Commissioning of 15W Inernal Wall Mount Cabinet Professional Speakers for speech & music in ABS enclosure with power taps at 15/ 7.5W/ 3.75W, Built-in 15.5/ 70/ 100V voltage input, Built-in 8/ 163/ 333 ohm impendence inputs, 105/ 90 dB/1M. 160°(Hor) & 150° (Ver) opening angles, 100Hz-18.5kHz frequency range with adjustable mounting brackets for embedment on pole or on wall as per site wired by speaker wire in zone with 1000 W per zone up to 700 M zone wiring length, Refer Technical Specification
2
-
-
... More
Supplying, installing, testing and commissioning of 60 Watts Power Amplifier rack mount, 50 Hz-18 khz response, 4 balanced inputs / 3 stereo line inputs, multiple outputs 4ohm/ 8ohm/ 70V/ 100V, distortion less than 3%, 1 kohm, separate bass/ treble control 19" rack mounted in 2U size complete with, selectable 2-tone chime, 19" rack mounted in 2U size. Refer Technical Specification
1
-
-
... More
Supplying, installing, testing and commissioning Intel Core I-7 Processor, 7th Geneation, 3.6 GHZ, System Memory 8GB DDR3, 2*2 TB HDD, 2 GB Graphic Card, Keyboard & Mouse, DVD RW, RJ-45 (10/100/1000 Ethernet), Windows 10 Professional Operating System, 19.5” Monitor , Mini Tower Cabinet. Refer Technical Specification
1
-
-
... More
Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 15 mtr cord length with male/female 19pin HDMI connectors as per requirements complete. Refer Technical Specification Speaker cable included in PA system
1
-
-
... More
Supplying of Wall bracket mounted 41” Full HD Commercial Display LED Screen with built-in media player, connected to workstation, 1920x1080 Full HD,16:9 aspect ratio, 350 nits, 5000:1 contrast, 1780 H/V, Ports-2xHDMI, USB, RJ45, Analog audio / video, RF, RS232C In/ Out, Narrow Bezel, 2*5W speakers, stereo input / output with remote with batteries. Refer Technical Specification
6
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface (medium) / recess (heavy) including cutting the wall and making good the same in case of recessed conduit as required. A) 25 mm
2028
-
-
... More
Supplying and fixing 6U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/exit cutouts and lockable toughened glass front door. (Dimension- DxWXH - 450X550X367 mm) as per specification in approved manner. Refer Technical Specification
5
-
-
... More
Supplying and fixing 9U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/exit cutouts and lockable toughened glass front door. (Dimension- DxWXH - 450X550X500 mm) as per specification in approved manner. Refer Technical Specification
4
-
-
... More
Supplying and fixing 12U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/exit cutouts and lockable toughened glass front door. (Dimension- DxWXH - 450X550X635 mm) as per specification in approved manner. Refer Technical Specification
2
-
-
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Refer Technical Specification
7054
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements