Goa Tourism Development Corporation Limited Tender

Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level iii) M-20 grade of concrete

Centering & shuttering including Strutting, Propping & removal of forms for : i)Foundations, Footings, Bases for columns

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Supply, installation, testing and commissioning of electronic type Three phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. '(b) 10 to 40 A

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement (a) In rocky strata

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required

Supply and erection of 8 mtr octogonal Papered H.D.G.I pole made out of 4 mm thick plate and heavy provision for cable entry. having weight not less than 97 kg 4 nos of J type M24 X 750 mm long foundation bolts of grade EN 8 as specified by GED

Supply & Installation of 1000mm single arm bracket PU Painted. MAKE:- RR ISPAT CONSOUL, Valmont, Bajaj, as required and directed by engineer incharge.

Supply & Installation of 1000mm four arm bracket PU Painted. MAKE:- RR ISPAT CONSOUL, Valmont, Bajaj, as required and directed by engineer incharge.

Supply, installation, testing and commissioning of 60W-80W LED streetlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection with high Efficacy and impact resistance of IK07 with 10KV Built-in Surge Protection Device. Make Bajaj, Havells,Transrail, Panasonic,Legero, phillips. or as directed by engineer Incharge or as per the requirement of Goa Electricity Department.

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size '(4) 4 Core 10 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required '(4) 4 x 10 Sq. mm.

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. '(6) 4 Core 25 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required '(6) 4 x 25 Sq. mm.

Supply and laying of ‘POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990, 3 Core 2.5 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required

Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required" (a) SP, Cat A

Supply , Installation, Testing and commissioning of street Light ServicePillar made out of CRCA sheet with PU painted complete with TPN incoming and outgoing MCCB's. TP contactors, Electroniic/ Digital/Mechanical Timer, connectors etc. complete (Street Light Pillar)

Reinstatement of roads

Supply and Laying of GI Pipe at the site of work as per the requirements of the engineer in charge including cleaning of the surface complete

Supply and fixing of 32A Kit Kat fuse unit per phase along with fixing of the fuses over wooden board and other required accessories mounting the arrangement over the electriciyt Department Pole.

Supply and Laying of PVC wire 2C X 2.5Sq.mm 1.1KV grade for service connection