Goa Tourism Development Corporation Limited Tender

Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level V. ii)M-20 grade of concrete

Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level v) M-30 grade of concrete

Centering & shuttering including Strutting, Propping & removal of forms for : i)Foundations, Footings, Bases for columns

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Supply, installation, testing and commissioning of electronic type single phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A

Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement (a) In soily strata

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required

Supply, installation, Testing and commisioning of 20 mtr high mast system with head frame, galvanized lantern carriage. Mast shaft shall be in two sections, hot dip galvanized and suitable for 44(MTR/Sec) wind velocity as per IS 875, the mast shall have an integral powertool installed inside the base compartment for its operation. It shall include accessories for high mast including steel wire rope 6 mm dia(7/19 construction ), trailing cable (5 core 25 sq.mm), double drum winch, galvanized Lantern carriage suitable for 12 nos.luminaires symmetrically and its control gear boxes and lighting finial, Fixing of Foundation bolts manufactred from special steel along with nuts, washers, anchor plates and templates, erection of LED type single dome aviation obstruction light. Control panel housing 32ATPN MCB incomer, single dial timer , contactor(18A) & 9A TP circuit for the automatic control of luminaries, 4 KVA Voltage stabilizer to control Voltage fluctuation-3 nos, MPCB 2.5-4A ,MCB-6A ,Indicating Lamps, outgoing terminals and control circuit for the power tool motor and push buttons for lowering and raising mechanism. Complete as required directed by Engineer-Incharge. Make Valmont, Bajaj, RR Ispat or Transrail.

Supply, installation, testing and commissioning of 350W LED Light made of body made of pressure die cast aluminium housing. Heat sink made of aluminium extrusion for better heat dissipation. Separate driver compartment and external Fins provide optimal Thermal management. LED provided with secondary optics for optimum optical performance Standard 5700K CCT, Minimum CRI -70. Greater than 905 Lumen maintenance expected at 50000 hours. Input volatge range from 140-270 V Ac. Constatnt current Driver with open and short circuit protection and with 5KV surge Protection. Power factor P.f -0.95. Ingress protection IP66.Maintenance free. Complete as required directed by Engineer-Incharge.. make Havells, Bajaj, Crompton, Wipro, Schreder, VinLed, Transrail, phillps.

Supply Installation, testing and commissioning of 9 m high hot dipped galvanised conical poles with 1000mm Street light with 4arm bracket made from 40 mm. Dia ‘B’ class G.I. Pipe, 1.2m. in length along with pole cap of 300mm length and 80 mm dia.(Suitable to pole top) duly welded having bottom dia. from 155 to 170 mm, top dia.from 65 to 75 mm with suitable 4nos. M24 X 750 mm J type foundation bolts complete with all required accessories. Pole will Be Painted with P U Paint as per GTDC color of choice.Make Valmount, Bajaj, Transail, RR Ispat as required and directed by engineer incharge.

Supply, installation, testing and commissioning of 60W-80W LED streetlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. Make Bajaj, Havells,wipro,Transrail, Panasonic, phillips and Legero as required and directed by engineer incharge.

Supply, Installation, Testing and Commissioning of 9mtr high Hot Dipped Galavanized Octagonal poles with 200mm bottom A/F & 100 mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 275X275X16mm including hexagonal bracket for six arm fixtures of length 1000mm and 4nos. of M24 x 750 J bolts EN 8 grade. .Make RR Ispat, Transrail or Bajaj as required and directed by engineer incharge

Supply, fixing, testing and commissioning of 120W LED flood light luminiare IP 66 optic compartment, pressure die cast aluminium housing, control gear compartment, frame with toughened glass with luminious efficacy 115 lumen/W at ta 25 deg c.in built surge protection upto 10kV as required and directed by engineer incharge. make Bajaj, Havells,wipro,Transrail, Panasonic, phillips and Legero.

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. 4 Core 25 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required. 4 x 25 Sq. mm.

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. 4 Core 10 sq.mm

Supply and laying of ‘POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990, 3 Core 2.5 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required

Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required" (a) SP, Cat A

Supply , Installation, Testing and commissioning of Outdoor double door IP54 Cubical Panel with cubical box compartmentalized provision to mount incoming and outgoing MCB along with the supply of the following no(i)RYB LED indicating Lamp(make Esbee)-3 Nos(ii)6A,Toggle Switch-3 Nos. (iii)b) 32A TP Contactor -1no. c) 24hr Timer with control MCB. - 1no. (iv)Neutral Link, 30A, 6 way-01 No. including fixing of existing meter in the Panel box with powder coating .The Panel box is to be constructed with 16SWG G.I sheet along with paint with one coat of red lead paint and 2 coats of enamel paint.The cubical panel should be mounted on the 9mtr pole at distance of 1.5 mtr or above the ground level with suitable arrangement as directed by Engineer In-charge complete as required.

Reinstatement of roads

Supply and Laying of GI Pipe at the site of work as per the requirements of the engineer in charge including cleaning of the surface complete

Supply and fixing of 32A Kit Kat fuse unit per phase along with fixing of the fuses over wooden board and other required accessories mounting the arrangement over the electriciyt Department Pole.

Supplying and fixing of Plaque of size 1.2 mtr X 0.9 mtr including Prinitng of content given by GTDC, making appropriate masonary enclosure for fixing of plaque complete as required as directed by Engineer - Incharge.

Liasoning with Electricity Department, electrical inspector, preparing necessary documentation work like test certificates, test reports, layout diagram etc and payment of necessary supervision charges, service connection charges to Electricity department, taking readings of resistance values, eath loop values by using meggar, earth loop resistance meter, voltmeter and clampmeter and submitting data to GED for handing over of light poles as required as directed by the engineer incharge.

Supply and Laying of PVC wire 2C X 2.5Sq.mm 1.1KV grade for service connection