Goa Tourism Development Corporation Limited Tender

Supply of 12.5M high mast shaft in two sections suitable for wind speed 44m/sec. with head frame, luminaries carriage suitable to install 6-8 nos. of luminaries in symmetrical arrangement, lightning finial along with Supply of Accessories required such as double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. make: Trainsrail, Bajaj, Volmount, Utkarsh India or as directed by the engineer incharge.

Supply of foundation bolts 6xM24x850mm manufactured from special steel along with nuts, washers, anchor plates and templates as directed by the engineer incharge.

Supply of LED Single dome aviation obstruction light as directed by the engineer incharge

Supply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial timer, 25A cotactor for automatic switching of luminaries , power tool control with 2 no. 9A contactors and raise lower push button, incoming 35 sq.mm and outgoing 16 & 2.5Sq.mm terminals with outgoing mcbs 6 nos.

Supply, Installation, Testing and Commissioning of 9mtr high Hot Dipped Galavanized Octagonal poles with 200mm bottom A/F & 100 mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 290X290X16mm and 4nos. of M24 x 750 J bolts EN 8 grade (without arms etc). MAKE:- Valmont,Transrail, Bajaj, Utkarsh India or as directed by the engineer incharge.

Supply of 6M hot dip galvanised standard Octagonal pole with 70mm top dia A/F., 130 mm bottom dia.A/F , made up of 3mm thick HT sheet, having base plate of size 220x220x12mm (without arms etc) MAKE:-,Transrail, Valmont, Bajaj, Utkarsh India as required or as directed by the engineer incharge..

Supply & Installation of 1000mm single arm bracket hot dip galvanized.MAKE Transrail, Valmont, Bajaj, Utkarsh India or as directed by the engineer incharge..

Supply & Installation of 1000mm double arm bracket hot dip galvanized.MAKE Transrail, Valmont, Bajaj, Utkarsh India or as directed by the engineer incharge..

Supply & Installation of 1000mm three arm bracket hot dip galvanized.MAKE Transrail, Valmont, Bajaj, Utkarsh India or as directed by the engineer incharge..

Supply & Installation of 1000mm four arm bracket hot dip galvanized. MAKE:- Transrail, Valmont, Bajaj, Utkarsh India or as directed by the engineer incharge.

Supply of 9M high mast shaft in Single sections suitable for wind speed 47m/sec. with head frame, luminaries carriage suitable to install upto 6 nos. luminaries in symmetrical arrangement, lightning finial,along with Supply of Accessories required such as double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. (Supply of bottom MCBs, top Junction box, top distribution cable for light fixture and cables from panel to the base of the mast shall not be in our scope) Make: Transrail, Valmont, Bajaj,Utkarsh India.

Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN incoming and outgoing MCCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete (Street light Pillar)

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 25 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 core 10sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement. (a) In soily strata

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing . as required

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size 2) 3 Core 2.5 sq.mm

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

providing & laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 20 mm nominal size) excluding cost of centering, shuttering and finishing in:

centering and shuttering including strutting, propping & removal of forms for (i) Foundations, Footings, Bases for Columns

Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level

Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level M-30 grade of concrete

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Supply and fixing of 32A Kit Kat fuse unit per phase along with fixing of the fuses over wooden board and other required accessories mounting the arrangement over the electriciyt Department Pole.

Supply and Laying of PVC wire 2C X 4Sq.mm 1.1KV grade for service connection