Goa State Urban Development Agency Tender

Design, Supply of 500W,IP 66 LED flood light to achieve average pitch horizontal illumination of 776 lux and vertical pitch 845 lux luminaire having housing and trim made of pressure die cast corrosion resistant alluminium alloy with heat dissipating fins design for excellent thermal management, Cover Glass- heat resistant toughened clear glass, Light Source - High power LED SMD type Color temp. White light 5700ºK ±300ºK and CRI 70 , MCPCB Construction, LPW 100 /120, Optical Lens- Polycarbonate high performance type narrow, medium, wide (other options as per project needs) , Ingress protection - Flood light IP66, Driver enclosure IP65 . incl. connections etc. as required of make Transrail/Wipro/Philips/GE/Atilite).

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (1) 4 ore 16 sq.mm

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (2) 3.5core 35 sq.mm

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (3) 3.5core 50 sq.mm

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (4) 3.5core 95 sq.mm

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (6) 3.5core 185 sq.mm

Supply of armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (7) 3.5core 300 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (1) 4 core 16 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (2) 3.5core 35 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (3) 3.5core 50 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (4) 3.5core 95 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (6) 3.5core 185 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (7) 3.5core 300 sq.mm

Supply of 4 core armoured PVC insulated PVC sheathed copper conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (1) 4core 1.5 sq.mm

Supply of 4 core armoured PVC insulated PVC sheathed copper conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (2) 4core 2.5 sq.mm

Supply and Laying of PVC flexible cable of 3C X 2.5Sq.mm 1.1KV grade for laying inside the pole.

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE copper conductor cable of 1.1KV grade, complete as required. (1) 4core 1.5 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE copper conductor cable of 1.1KV grade, complete as required. (2) 4core 2.5 sq.mm

Providing & fixing G.I. pipes complete with G.I. fittings including trenching and re-filling etc. as reqd. ( external work) 50 mm nominal bore.

Providing & fixing G.I. pipes complete with G.I. fittings including trenching and re-filling etc. as reqd. ( external work) 100mm nominal bore

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).

Extra for using salt & charcoal for pipe earth electrode as required.

Providing and laying 25 mm x 5 mm G.I.strip on surface or in recess for connections etc. as required

Supply, Installation, Testing & Commissioning of outdoor type compartmentalize feeder pillar with double door and locking facility fabricated with 16swg CRCA M.S. sheet duly degreased,derusted,powder coated with interconnections with copper wiring,glanding,lugging,earthing stud etc. suitable for 440 volts, 3phase, 4wire, 50Hz AC supply ,mounted on stand fabricated with M.S. angles of size 35mmx35mmx6mm comprising of following: 1) 100 Amps TP MCCB as incomer of approved make - 1 No. 2) Indicating lamp set RYB with control fuses - 1 set 3) 60 Amps 3 pole contactor L&T/siemens make - 4 No. 4) Single dial timer of make:GIC with MCB - 4 No 5) Power tool control with 2 Nos 9A contactors and raise lower push button 6) Neutral link, 20A, - 1No.

Earthwork in excavation by mechanical means(hydraulic excavator/manual in foundation pipeline trenches drain not exceeding 1.5m in width 10 sq.m on plan including dressing of sides, ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50 m. a) All types of ordinary rock including all types of laterite rock,blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consoldating etc in pipeline trenches and other foundations complete

Providing and laying cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) excluding cost of centering ,shuttering and finishing: a) All work upto plinth level

Providing and laying in position ready mixed concrete (RMC) with usage of Fly Ash as per IS 3812 and IS 456-2000 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer- in-charge. All works upto floor V level M-30grade of concrete

Centering and shuttering i/c strutting, proping etc. and removal of form for . b) Vertical surfaces such as retaining walls,return walls,walls (any thickness) including attached pilasters, buttresses,plinth and string courses,fillets etc

Providing Mild steel reinforcement conforming to IS- 1786 of 1986 for RCC work incl. bending, binding and placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose comprehensive strengh is not less than that of surrounding concrete in the structural member

Supply installtaion testing and commissioning of 180kva 3phase Diesel Generating Set with multi inline cyclinder coupled to 3phase Alternator. 1.0 DIESEL ENGINE: Engine shall be Mahindra (mpower)/ Volvo Eicher/ Perkins capable of developing required power at 1500 rpm & compact with large reserve power and stable in operation with excellent speed regulation confirming to Governing performance in accordance with BS-5514. The engine selected above provides optimal fuel economy, low noise, low maintenance and long life meeting the Emission standards. The engine shall be complete with the following:  Flywheel, Lift Eyelets, Crank Case Ventilation & Engine Mountings  Engine driven Lub. Oil Pump, Strainer, Oil Filters, Oil Dip- Stick & Drain Plug.  Fuel Injection Pump, Speed Governor, Fuel Filters and Fuel Pipes.  Air Filters & Exhaust arrangement.  Radiator, Engine driven Coolant Pump, Thermostate, Engine driven Radiator Fan, and Integral piping.  DC Electric Starter Motor, Battery Charging DC Alternator, Switches, Sensors & its Engine wiring. 2.0 A.C. Alternatur: A.C. Generator of suitable rating shall be Leroy Somer make Industrial, Brushless type, Synchronous, self excited, self regulated type fitted with AVR for voltage regulation of +/-1%. A.C. Generatorshall be with Class of Insulation ‘H’, Screen Protected drip proof having enclosure as per IP-23 and horizontal foot mounted single bearing type confirming to BS-5000, IS4722.  ACOUSTIC ENCLOSURE DPK/Supernova Acoustic Enclosures are thoughtfully crafted, art-piece. The design of the Enclosure is with natural air circulation without loss of any power for ventilation fan. Each DG Set with Enclosure undergoes strict quality checks and testing to achieve high-end performance. Supernova Acoustic Enclosure with other accessories meets the detailed specifications/ scope of supply as under: The Enclosure enables reduction of 25dbA, thus at 1mtr. Distance under free field condition, it measures 75 dbA.

Two years maintaince package inclduing minor breakdown and oil change servicing for entire 2 years 180kva Diesel Generating Set

Supply and laying of 11KV 3C X 300 sqmm HT cable.Polycab make.

H.T.11 KV Termination kit indoor of Raychem make.

H.T.11 KV Termination kit outdoor Raychem make.

RCC pole 11.0 mtr long

11KV GOAB switch 200amps

11KV HG Fuse 200amps

Supply and fixing of 9KV Lighting arrestor

HDGI Structure Material

HDG 11 KV 'V' shape cross arm with HDG clamps and HDG nut bolts etc. for 11 mtrs long RCC pole

HDG top fitting cross arm of channel ISMC 75x40x6 mm 0.7 mtrs long along with HDG clamps & HDG nut bolts etc for 11 mtrs along RCC pole

11 KV pin insulator with HDG pin

ACSR Weasel Conductor 6/1/2.59 (nominal aluminium area 30 mm') (139 amp max at 45 C) for jointing and jumpering

Supply of 11KV Metering cubicle fabricated in CRCA Sheets. The Panel shall be powder coated and it will be totally dust and Vermin proof with busbar,wiring and base frame. lt will consist of:- o 11KVCT's 25l5A Cls-0.5s, STC-13.1 :3Nos o 11KVPT's 50VA :3Nos o HT Trivector Meter DLMS :1No o Modem:1No CT's & PT'S are MRT tested and are approved by Electricity department Pragati make.

Providind and making Chemical Earthing 3mtr deep with copper bonded earthing rod dia 17mm x 3 mtr length with 25kg x 2 nos BFC bag with Frp square earth pit cover of 300 x 300 mm

Providing & Fixing 50x5 mm GI strip for neutral connection earthing

Providing & Fixing 25x5 mm GI strip for body earthing

Supply and erection of Non extensible load break switch 400 A,switchgear with oil type as approved by GED for isolation and protection of transformer (100 - 800 KVA). The load break switch will be having protection system mechanism and plunger type HRC bottle type fuses with an fault tripping arrangement.Type: NEFS with 2 sets of Terminal protector boots and transportation. Make: Lucy Electric

GI chain link fencing for Transformer substation

Providing and spreading of metal in substation area including labour cost.

Providind and making Thermal Insul coating for 2nos of HT metering units

Providing and laying of 1x70 sqmm copper flexible cable for neutral connection of D.G set

Supply, erection, testing and commissioning of Main panel board. Panel shall be frabricated from 2/1.5 mm thick CRCA sheet, with rubber gasket on door and power coated with seimens gray shade. Panel will be provided with 800A(80x10mm) for phase & 80 x 6neutral AL. bus bar and 40mmx5mm AL strip. Base channel 75x40x5 shall be provided. Control wire - PVC insulated 1100v copper 1sqmm 2.5sqmm. Power wiring - PVC insulated 1100v copper 35sqmm/25sqmm/16sqmm/6sqmm. Panel consisting of: Incomer: 800A ACB 4P 50KA TM MDO - 1NOS - L&T Make 250A MCCB TP 36 KA TM WITH ROH - 1NOS - L&T Make 400A MCCB TP 36 KA TM WITH ROH - 1NOS - L&T Make RYB LAMP 240V AC - 3 sets - L&T Make VIF METER /5 - 3NOS - Elmasure/ L&T Make ELR WITH CB CT - 1NO - PROK Make SP MCB 6A 10 KA - 10NOS - L&T Make CT 800/5 15 VA - 3NOS - Lotlikar Make CT 250/5 15 VA - 3NOS - Lotlikar Make CT 400/5 15 VA - 3NOS - Lotlikar Make Outgoing: 400A 4P MANUEL - 1NOS - L&T / C&S Make 100A MCCB TP 25 KA TM WITH ROH - 6NOS - L&T Make 63A 3P MCB 10 KA - 16NOS - L&T Make 250A 4P MANUEL - 1NOS - L&T / C&S Make 100A MCCB TP 25 KA TM WITH ROH - 4NOS - L&T Make 63A 3P MCB 10 KA - 4NOS - L&T Make

400 KVA, 11/0.433 KV, Oil Cooled, Copper Wound Transformer. Off Circuit Tap Changer HV & LV side cable box As per BIS 1180, level 2 Approved by Goa Electricity department Make: SVT make Including M.R.T testing at Margao, Handling Charges & Transportation to the site, unloading etc complete.