Goa State Urban Development Agency Tender
View complete overview of Goa GSUDA Tender
Costs
EMD
₹ 15,08,463Document Cost
₹ 20,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GSUDA_14422_2Bid Award Id
ViewTender No
F43/3/GSUDA/E tender/46/2371 dt 15/02/2024Tender Authority
Goa State Urban Development Agency ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Refilling the plinth , flooring, foundations etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed
by Engineer in Charge.
1768.4
-
-
... More
Loading and unloading of excavated earth.By mechanical transport including loading , unloading and stacking upto a lead upto 10 kms
1845.6
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
278
-
-
... More
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Pre-construction
80
-
-
... More
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Post-construction
310
-
-
... More
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
219
-
-
... More
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level
200
-
-
... More
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
4
-
-
... More
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-30 grade of concrete
219
-
-
... More
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-25 grade of concrete
924
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (i) Foundations, Footings, Bases for columns
1228.64
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (iii)Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
184.8
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (ii)Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
3208
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (vi)Staircases (except spiral staircases) excluding landing
134
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
309.75
-
-
... More
Centering & shuttering including Strutting, Propping & removal of forms for: (xiii) Suspended floors, roofs landings, shelves & their supports
78.52
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m,for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs landings,beams & balconies.(From 3.50m upto 4.50m)
295
-
-
... More
Providing TMT steel reinforcement (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
133921
-
-
... More
Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge Size 700 x 500 x 75 mm with steel reinforcemnt not less than 3.0 kgs per unit
300
-
-
... More
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
113
-
-
... More
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in superstructure from floor I level upto floor V level.
452.8
-
-
... More
Providing and laying half brick masonry using fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos of 6mm dia M.S bars at every third course embedded in cement mortar above plinth upto floor V level.(With bricks of class designation 40 kg/sq.cm.)
14
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces,in all positions including scaffolding and curing etc. complete.
674
-
-
... More
Providing internal cement plaster 6mm thick in a single coat in cement mortar1:3without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
45
-
-
... More
Labour charges for providing groove in external plaster having width and spaced as
directed by engineer incharge etc. complete.
100
-
-
... More
Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand)
finished with sponge.
892
-
-
... More
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth
complete.
557
-
-
... More
Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
6
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
542
-
-
... More
Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
1042
-
-
... More
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
1907
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
4442
-
-
... More
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. 600x 600 mm Dark Shades
6
-
-
... More
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc. complete. 20mm thick
378
-
-
... More
Rubber Skirting:
Factory supplied 75mm x 100mm rubber base molding to include air channelling in back of base to provide full ventilation of the sub-floor system. Fixed to the wall with a base molding adhesive as recommend by manufacturer
27
-
-
... More
Aluminium Skirting:
Supply of 2.6 mm thick Aluminium Profile for periphery of sports flooring, width of Aluminium profile 126 mm and 6feet long with counter hole and Anodising
6
-
-
... More
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.:600 x 600 mm - Dark Shades
150
-
-
... More
Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
5
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm-Jet Black
8
-
-
... More
52mm thick cement concrete flooring/ IPS Flooring with metallic concrete hardener topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layers 12 mm thick metallic cement hardener constituting of mix 1:2 (1 cement: 2 graded stone aggregate 6 mm nominal size by volume with which metallic quality is mixed in ratio 4:1 (4 parts of cement: 1 part of metallic) hardening compound of approved floor hardening compound of approved quality) by weight, including finishing complete.
175
-
-
... More
Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) etc.complete
5
-
-
... More
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the Engineer
5
-
-
... More
Full/half rounding and polishing of edges of granite slab as per the requirement.
7
-
-
... More
Providing M.S. footrests including fixing in
manholes with 20 x 20 x 10 cm cement concrete
block 1:3:6 (1 cement :3 coarse sand :6 graded
stone aggregate 20 mm nominal size) as per
standard design :
36
-
-
... More
Supplying and fixing CI manhole cover and frame of 445x610 mm rectangular C.I. cover (light duty)
weight of cover to be not less than 23 kg. as per specification and as directed.
16
-
-
... More
GYMNASIUM FLOOR Supply and Installation of Gerflor make multi-layered interlocking loose lay vinyl tile with polyurethane treatment (PUR+), 6 mm thick with a dovetail joint, abrasion group it consist of 2 mm thick vinyle wear layer , reinforced with 2 glass fiber grids on either side of an intermediate pressed homogeneous layer and 4 mm thick black pressed homogeneous sheet, Weight should not less than 9265 g/sq.m and size of tile 635 x 635 or 600 x 600mm and below specication Fire rating EN 13 501-1 Class Bfl-s1 Static electrical propensity EN 1815 kV _ 2 Slip resistance wet: ramp test with oil DIN 51 130 Class R10
87
-
-
... More
Supply and installation spike resistance rubber flooring for Locker room it consist of colour rubber granules and 30% synthetic EPDM granules floor should be Environmental friendly, non-toxic, Recycled , non-polluted, anti slip and anti-fatigue Laid with adhesive as per manufacturer’s instruction over existing leveled surface with following Technical specification. 6mm
64
-
-
... More
Providing 20mm thick marble slab to urinal partitions with cement complete
2
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
6
-
-
... More
Providing and fixing M.S. fan clamp type 1or II of 16 mm dia M.S. bar bent to shape with hooke ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.
7
-
-
... More
Providing water proofing treatment over the new R.C.C. roofs, terrace, toilet by spreading cement slurry over the R.C.C. slab and laying of10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. inthe R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.(Terrace, Sunken Portion of WC's, Toilet, Kitchen etc)
6
-
-
... More
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (To be used in Concrete of Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS)
263
-
-
... More
Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) For vertical surface two coats @ 0.70 kg per sqm
537
-
-
... More
Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) For horizontal surface one coat @1.10 kg per sqm
263
-
-
... More
Providing and applying two component elastomeric, polymers modified cementious waterproofing membrane. The seamless waterproof membrane shall be applied in 2 coats. Rate to include supply & laying of 40 GSM SCRIM Cloth to be laid over the 1st Coat. The product shall exhibit at least 40% elongation with tensile strength greater than 40 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. The rate shall include (if required), crack filling, grouting, tie rod filling, coving, ponding, etc complete. Quoted rate includes all costs towards providing coving for joints and providing water proofing treatment for vertical faces above coving for a minimum height of 300mm and protecting the vertical faces, providing waterproofing treatment of rainwater khurras to ensure 100% leak proof joint. All the joints shall be seamless to ensure 100% waterproof treatment for treated area.
537
-
-
... More
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.Second class Indian teak wood
0.98
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
17
-
-
... More
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS
13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
shutter thickness :: b) 35mm
3
-
-
... More
Providing and fixing hydraulic floor spring of reputed make Everrite, prabhat or equivalent as per the manufacturer's as specification having double action spring as approved by the Engineer-in-charge.
2
-
-
... More
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
5
-
-
... More
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete 125 x 70 x 4.0mm (ordinary type)
8
-
-
... More
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete 75 x 40 x 2.5 mm (ordinary type)
20
-
-
... More
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.250 x 10 mm
7
-
-
... More
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
6
-
-
... More
Providing and fixing chromium plated brass handle with necessary screws etc. complete.-125mm
9
-
-
... More
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
18
-
-
... More
Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).
6
-
-
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
12
-
-
... More
Extra for providing mechanical device, chain and crank operation for operating rolling shutters.Exceeding 10.00 sq.m. and upto 16.80 sq.m. in area
12
-
-
... More
Providing and fixing Ball bearings for rolling shutters
3
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
740
-
-
... More
Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon
bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully
water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be
measured.
60
-
-
... More
Extra over design, supply and installation of Spider glazing system, for provision of 12mm thk clear toughened glass door shutter fittings including the cost of top & bottom patch fitting, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg, floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required.
5
-
-
... More
Providing and Fixing mat finish stainless steel (of 302grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameter etc.complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)
6
-
-
... More
Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading and including filling gaps with silicone sealant of approved make etc complete. (Shop drawing to be submitted by contractor for approval.)
13
-
-
... More
Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
1
-
-
... More
Steel work(SAIL, TATA. VIZAG only) riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In tees, angles, flats and channels
80
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
21920
-
-
... More
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
304
-
-
... More
Providing and fixing prefabricated gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready
mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
65
-
-
... More
Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses.
0.63 mm thick sheet - 24 G
245
-
-
... More
Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design. 0.63 mm thick sheet
30
-
-
... More
Extra for providing and fixing curved corrugated G.I. sheets to roofing
245
-
-
... More
Providing and fixing Toilet cubicals as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required colour ,shade and sizes as manufactured by Besco by Merino or Greenlam Sturdo or T Line or equivalent as approved, including stainless steel accessories ( SS-304 grade) like square top rail. Front panel and divder wall with stripe shoe touching floor ( No gap shall be at bottom of divder/front panel except door) , knob, thumb turn and indicator, twin coat hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawings . The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction of Engineer in charge. The cubical unit shall be minimum 10 years guarantee for the board against any moisture and 5 years guarantee for the hardwares. (Cubical size =(900mm width x1500mm depth), Cubical Height =2100mm, External Laminate finish = Metallic).
10
-
-
... More
Supplying & Installation of Heavy Duty Commercial Treadmill- Treadmill 6.5hp Quiet Reliable AC Motor is able to Resist the Hardest Training Session and have Accurate Control of Speed from 0.8 to 25km/jr . With Max Silence.Reinforced and Oversized Cambered Surface-The Widen Frame with steel tube ST- 52 Reaches 17cm. The Commercial Grade Cambered Surface Deign Steel Provides Maximum Strenght and Elasticity during exercise-Running Surface-58cm Width and 160cm Length Comfortable Running.Incline Rane 0-
18 Level Built In Variable 36 Training Programs-With Unique HST Phoenolic Wax System The Treadmill is Maintenance free and Eliminate the need of Lubrication-Contact Pulse Measurement-Lenght 212cm, width-94cm, Height-153cm. programs - 1 manula, 36 Preset Programs, 3 user Profiles, 1 Random, Data Readout Time/Speed/Distance / calories/ Pulse / Body Fat Maxiumum User Weight - 160kgs
2
-
-
... More
Supplying & Installation of Commercial Elliptical Trainer - COMMERCIAL
ELLIPTICAL
Resistance : 32 Levels
Flywheel : 9 Kg
Transportation : 2 Wheels
Weight : 137.50 Kg
Dimension : 2145 x 666 x 1740 mm
1
-
-
... More
Supplying & Installation of Spin Bike - SPIN BIKE
Crank Arm : 3 pcs
Resistance : Stepless
Flywheel : 20 Kgs
Transportation : 2 Wheels
Weight : 65.50 Kgs
Dimension : 1170 x 560 x 1140 mm
2
-
-
... More
Supplying & Installation of MULTI PRESS
1
-
-
... More
Supplying & Installation of LAT / MID ROW
1
-
-
... More
Supplying & Installation of BICEP / TRICEP
1
-
-
... More
Supplying & Installation of LEG PRESS
1
-
-
... More
Supplying & Installation of INNER / OUTER THIGH
1
-
-
... More
Supplying & Installation of PEC AND REAR DELTOID
1
-
-
... More
Supplying & Installation of ASSISTED CHIN DIP
1
-
-
... More
Supplying & Installation of ASSITED CHIN DIP
1
-
-
... More
Supplying & Installation of FUNCTIONAL TRAINER
FREE WEIGHTS |
Dimension : 4053 x 1084 x 2312 mm
Net Weight : 400 Kg
Standard Steel Weight Stack : 70 Kg / side
Dimension : 2540 x 1220 x 2260 mm
Net Weight : 400 Kg
Standard Steel Weight Stack : 70 Kg / side
1
-
-
... More
Supplying & Installation of Smith Press with Power Rack Combo
1
-
-
... More
Supplying & Installation of Olympic Bench Incline
ACFIT INCLINE OLYMPIC BENCH AF-7042
Dimension : 1960 x 1700 x 1400 mm
Net Weight : 130 Kg
1
-
-
... More
Supplying & Installation of BSFID - Flat / Incline / Decline Bench
1
-
-
... More
Supplying & Installation of FLAT BENCH
1
-
-
... More
Supplying & Installation of 3 TIER DUMBBELL RACK
1
-
-
... More
Supplying & Installation of PLATE TREE
1
-
-
... More
Supplying & Installation of BARBELL RACK
1
-
-
... More
Supplying & Installation of RUBBER HEAD ROUND DUMBBELLS - 2.5KGS, 5KGS,
7.5KGS,10KGS,12.5KGS,15KGS,20KGS,25KGS ( TILL 10KGS
2SETS,THEN AFTER 1SET EACH) - 10KGS-3SETS ONLY
1
-
-
... More
Supplying & Installation of RUBBER TRI GRIP OLYMPIC WEIGHT PLATES -
2.5,5,7.5,10,15,20KGS- 2 SETS EACH
1
-
-
... More
Supplying & Installation of OLYMPIC 50MM SLEEVES - WITH STANDARD KNURLING
BARBELL RODS- 7FEET, 5FEET, 4 FEET, EZ CURL BAR, TRICPE
BAR- 1NO EACH
1
-
-
... More
Supplying of GYM BALL -65CM, 75CM, 85CM - 1NO EACH
1
-
-
... More
Supplying & Installation of MEDICINE BALLS - 2KG, 3KGS, 5KGS- 1NO EACH
1
-
-
... More
Supplying of EXERCISE FLOOR MATS
5
-
-
... More
Supplying of WEIGHTED SKIPPING ROPE
5
-
-
... More
Raising the FOP: Supplying and stacking of (contractor's material) Murrum at site,having P.I. Value not more than 6 & Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling each layer with half ton roller or wooden or steel hammers and rolling every third and topmost layer with power toller of minimum 8 tonne and dressing up in embankment for roads, flood banks, marginal and guide banks, define boundaries , ground layout, drainage planning and filling up of ground dressing etc. complete.
2100
-
-
... More
Earthwork in excavation over areas/Trenches by mechanical/mannual means at all depths( till 3 mt) in all types of strata’s comprising of the materials such as soil, silt, sand, clay, gravel moorum of all varieties shringles, pebbles, all types of conglomerates laterite rocks, ordinary rocks, disintegrated rocks, fissured / shattered rocks decomposed rocks or weathered rocks and all such other materials as described under appendix “A” to these specifications either in full or in parts as the case may be adopting any method / methods as may be convenient or permitted inclusive of blasting chiseling wedging etc. in all conditions such as dry, moist foul submerged saturated etc. and as directed by the Engineer-in-charge, etc. all complete including dressing of sides, ramming of bottom including all leads and lifts including getting out the excavated soil as directed including pumping and bailing out water, barricading danger lighting guarding as directed by the departmental officers.
525
-
-
... More
Refilling the plinth , flooring, foundations etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed
by Engineer in Charge.
437.5
-
-
... More
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level
20
-
-
... More
Pre-cast cement concrete kerb-stones(factorymade) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 60 cm L x45 cm H x 15 cm T
292
-
-
... More
Antitermite veedicide treatment of the soil
3500
-
-
... More
Supplying ,laying and compacting of stone aggregate 40mm nominal size to for m a contour and elevation to desired level( compacted thickness 80mm)
280
-
-
... More
Supplying ,laying and compacting of stone aggregate 20mm nominal size to for m a contour and elevation to desired level( compacted thickness 20mm)
70
-
-
... More
Supplying ,laying and compacting of stone aggregate 6-10mm nominal size to for m a contour and elevation to desired level( compacted thickness 25mm)
87.5
-
-
... More
Providing and laying Geo-textile (non-woven fabric material of approx.150 to 300GSM) application from approved brand and quality for Football ground satisfying IS.codesIS162(Part-3),1992 and IS16393,2015 including material cost, labour as directed by the engineer-in –charge and as per approved drawing etc. complete (Sample of the items shall be approved by the Engineer-in-charge before procurement).( contractor has to bear all the cost and arrange all permissions for interstate transit of goods including storage of the goods and will be paid for actuals).
3500
-
-
... More
After the subbase formation is complete make trenchesas par the design provided including getting out the excavated soil, and then returning the soil as required,in layers not exceeding 20cm in depth , including consolidating each deposited layer by ramming , watering etc. and disposing of surplus excavated soil as directed within a given lead. Rate also includes for providing and laying Perforated pipes of specified Diameter pores/holes (strainer pipes) to be surrounded by the filer media made of mixtures of granitic or basaltic aggregates of 20mm nominal sizes and down grade and with Geo-textile of recommended company to prevent the blocking of the holes of the pipe and for the proper drainage of water. Testing of the sub-base for it's functioning is to done before laying of the turf.
250
-
-
... More
Constructing brick masonry road gully chamber 110x50x77.5 cm with brick in cement mortar1:4(1cement :4 coarse sand) including 500x450 mm precast RCC horizontal grating with frame and vertical grating complete as per standard design.
4
-
-
... More
Providing and laying at the site of work a new artificial Turf of Product Model :EbacoTitanium 50mm Multi SportsTurf or PRO-F-PRIME-50-LG&DG-LATEX or it's equivalent of approved product code and firm for the football playing ground with all the fixtures and accessories, satisfying all the product technical specifications provided below including FIFA certification; from the reputed manufacturer so approved by the Engineer-in-Charge to be laid on the approved prepared surface following necessary detailed technical specifications of the manufacturer of the material .The Turf to be laid at proper slope, alignment, covering horizontally and vertically dimensions of the plot as per the approved drawing with sufficient anchorage as specified at the ends for preventing peeling-off etc. complete including all charges of material, labour, technical support etc. The cost shall include the charges for testing the playing surface so prepared by the experts before commissioning and will maintained by the contractor for one year from the date of commissioning at his own cost. Storage of the material will be at the risk and cost of the contractor. (Contractor shall measure the actual area before procurement and will be paid for actuals and bear the all the expenses for procurement of the material ). The synthetic sports surface manufacturer must have recent certification from ISO 9001 and ISO 14001:2004. Manufacturer Warranty of product should not be less than 10 years.(contractor has to bear all the cost which alo includes damages and arrange all permissions for interstate transit of goods). 1.Pileheight: 50mm 2.Turf gauge: 5/8inch; stitch rate 14/10cm. 3.Colour : Light Green And Dark Green. 4.Dtext:12,000Monofilament 5.Backing : Triple layers +latex 6.Roll weight : 340kg per roll 7.Roll size:13.12x131.23=1722Sq.ft. 8.In fill: Infill of silica sand dust and rubber granules is must in ratio of 3.0Kg/Sq.ft. and 0.30Kg/Sq.ft. 9.Ground markig as per FIFA guidelines
3500
-
-
... More
Providing and installing of a pair of new Football Goal Post with padding and nylon Net (MS/Aluminium 14ft -W x 9ft-H x 3.50ft -Depth )of approved brand and quality satisfying all the required technical specifications including FIFA certification for the finished product .The product shall required to fulfil in whole the specification laid down by the Sports Authority of India and it's all accessories including nylon Net etc. complete. All the assembly has to be fixed on the ground in accordance to guidelines as specified by the Sports Authority of India with due approval of the authority so appointed for this job including cost of all labours, materials and the technical staff, taxes etc. complete. ( contractor has to bear all the cost which also includes storage of the goods and it' s damage and has to arrange all permissions for interstate transit of goods ). * Football Goal Post *Branded Epoxy Paint *Made with branded high-quality MS Steel Pipe in 4" Dia & Branded Epoxy Paint. *Rust & Corrosion Free *Zero Vibration *Size : 24 Feet x 8 Feet *Back Support of 1.5". *Special Nylon hooks for Net Two goal post at two ends of the ground
1
-
-
... More
Setting of drilling rig on the drilling site and its shifting after completion of bore wells, drilling 203/150mm dia bore hole in all types of strata up to a maximum depth of 100mts and collecting and supplying representative sample of all soil rock strata encountered during drilling etc. complete. Over burden drilling 203mm dia and drilling through rock should be 150mm dia.( contractor to obtain WRD approval) dia of borewell =150mm
300
-
-
... More
Development of borewell using air compressor air/back washing for a period of and less than hours until all lines are flushed out and steady discharge is attend & measuring the well discharge on 90-degree V notch or with a barrels and stop watch. tube wells by upto compressed air/back washing for a minimum period of two hours and all fines are flushed out including equipment for re-drilling and its removal after completion.
2
-
-
... More
Providing and fixing threaded well cap of cast iron/G.I suitable for 150mm (6) dia casing pipes bore wells as directed.
2
-
-
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankement upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.as per MORTH Specification 301
450
-
-
... More
Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling each layer with half ton roller or wooden or steel hammers and rolling every third and topmost layer with power toller of minimum 8 tonne and dressing up in embankment for roads, flood banks, marginal and guide banks and filling up of ground dressing etc. complete
450
-
-
... More
Construction of granular sub-base by providing coarse graded granitic or baslitic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401 For Grading II Material
80
-
-
... More
Providing. Laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH Specification 406
80
-
-
... More
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level
209
-
-
... More
Providing & laying of minimun 60mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant. 2) Size: 210mm x 105mm x 60mm (Type: Rectangular Shape) b) Other Colours
995
-
-
... More
Pre-cast cement concrete kerb-stones(factorymade) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 60 cm L x45 cm H x 15 cm T
1125
-
-
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
50
-
-
... More
"Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints, etc. complete. B) 250 mm dia RCC pipe"
50
-
-
... More
Earthwork in excavation over areas/Trenches by mechanical/mannual means at all depths( till 3 mt) in all types of strata’s comprising of the materials such as soil, silt, sand, clay, gravel moorum of all varieties shringles, pebbles, all types of conglomerates laterite rocks, ordinary rocks, disintegrated rocks, fissured / shattered rocks decomposed rocks or weathered rocks and all such other materials as described under appendix “A” to these specifications either in full or in parts as the case may be adopting any method / methods as may be convenient or permitted inclusive of blasting chiseling wedging etc. in all conditions such as dry, moist foul submerged saturated etc. and as directed by the Engineer-in-charge, etc. all complete including dressing of sides, ramming of bottom including all leads and lifts including getting out the excavated soil as directed including pumping and bailing out water, barricading danger lighting guarding as directed by the departmental officers.
1002
-
-
... More
Spreading of sludge farm yard manure or/and good earth in required thickness (cost of sludge, farm-yard manure or/and good earth to be paid separately) as per MORTH Specification 307
167
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
334
-
-
... More
Supplying of sludge duly stacked at site/store as per
MORTH Specification 308.2
167
-
-
... More
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded).
668
-
-
... More
Spreading of sludge farm yard manure or/and good
earth in required thickness (cost of sludge, farm-yard
manure or/and good earth to be paid separately) as
per MORTH Specification 307
668
-
-
... More
Grassing with Doob grass including watering and
maintenance of the lawn for 30 days or more till the
grass forms a thick lawn free from weeds and fit for
moving including supplying good earth if needed as
per MORTH Specification 307
1670
-
-
... More
SHRUBS
200
-
-
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Sampurna - 19:19:19
25
-
-
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Urea
25
-
-
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Neem cake
25
-
-
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. MOP - Murrete of Pottash
25
-
-
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Micronutrient mix (organic manure)
25
-
-
... More
Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Chloropyrifos - 20% EC
15
-
-
... More
Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Monocrotophos - 50% EC
15
-
-
... More
Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Sevin Powder
15
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) (2.14.1) Holes 1.2 m dia and 1.2 m deep
10
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) (2.14.2) Holes 90 cm dia and 90cm deep
10
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) (2.14.3) Holes 60 cm dia, and 60 cm deep.
10
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) (2.14.4) Holes 45 cm dia, and 45 cm deep.
10
-
-
... More
Half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metre, and height 1.2 metre, above ground and 0.20 metre below ground bottom two courses laid dry, and top three courses in cement mortar 1:6 (1 cement 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete.
50
-
-
... More
Alstonia scholaris height 150-165 cm. in bag size 25 cm, Well developed.
5
-
-
... More
Azadirachta indicia ( Neem ) height 120-130cm in big polybag size 25 cm, Well developed.
5
-
-
... More
Mimusops elengi (Maulsri) height 150-165 cm. in big poly bag size 25 cm, Well developed.
5
-
-
... More
Polyalthia longifolia (Ashok) height 180-195 cm. in gunny bag size 30 cm, Well developed.
5
-
-
... More
Polyalthia pendula (Ashok Pendula) height 180-195 cm. in gunny bag size
30 cm, Well developed.
5
-
-
... More
Bottle palm ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bag
5
-
-
... More
Bismarckia Palm 115 to 180 cm ht. plant, well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot
5
-
-
... More
Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed, well developed
5
-
-
... More
Foxtail palm well developed with fresh & healthy foliage of ht. plant 210 to
240 cm in big 40 cm Cement Pot
5
-
-
... More
Washingtonia filifera palm well developed 90 to 105 cm ht. plant having 5 to
6 straight fresh and healthy leaves in 35 cm Cement Pot
5
-
-
... More
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support -
W.C. Pan with white plastic seat and lid
4
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I.
brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
3
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.
6
-
-
... More
Providing and fixing G. I. Inlet connection for flush pipes connecting with W. C. pan.
4
-
-
... More
Providing and fixing C.P. brass or M. I. Trap for wash basin and sinks: (a) 32 mm dia
6
-
-
... More
Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.
11
-
-
... More
Providing & Fixing In Position 25 mm diameter mosquito proof coupling of approved municipal design.
11
-
-
... More
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
7.68
-
-
... More
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (a) 750 x 20 mm size
6
-
-
... More
Providing & fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C. P. brass screws (a) Glass container
6
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 (a) 15mm nominal bore
4
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 (a)15mm nominal bore
3
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993(a) 15mm nominal bore
7
-
-
... More
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
4
-
-
... More
Providing and fixing non-return valve of approved quality : (a)40 mm nominal bore
2
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: (a)100 mm diameter
6
-
-
... More
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete : (a) 150 mm diameter
40
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design 150 x 100 mm size –P or S type
6
-
-
... More
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm
nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as
per standard design. (a)Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )
4
-
-
... More
Inside size 1.2m x 90 cm and 90cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg. (weight of cover 58 kg).
4
-
-
... More
Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement and making necessary channels for the drain etc. complete: (a)For pipe 100 to 150 mm dia
1
-
-
... More
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: (a)110 mm dia
510
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. (a)110 mm dia
22
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : (a)100 mm dia
22
-
-
... More
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: (a) 110 mm dia.
12
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door (a) 110 mm dia Each 128.00
4
-
-
... More
Providing and fixing R.P.V.C. vent cowl: (a) 110 mm dia
8
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(a) 20 mm outer dia CPVC pipe
190
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (b)25 mm outer dia CPVC pipe
40
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).(c)32 mm outer dia CPVC pipe
30
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (a) 20 mm dia nominal outer dia pipes.
20
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.(b) 25 mm dia nominal outer dia pipes.
10
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (c)32 mm dia nominal outer dia pipes.
5
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,
trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) (d)32 mm nominal outer dia pipes
25
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,
trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) (e) 40 mm nominal outer dia pipes
150
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,
trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) (F) 50 mm nominal outer dia pipes
75
-
-
... More
Providing and fixing P.V.C.Rain water pipes of 160mm outer diameter and having wallthickness of 2.2to2.7mm confirming to I.S .135921992 including proper rain water receiving recess with P.V.C. plug,bend,necessary fittings ,such as,offsets,shoes,inluding fixing the pipe on wall using approved wooden cleatsprojecting 25mm to 40 mm from face of wall a fixing with clips of approved quality and number,filing the join t using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks,including necessarys caffolding and maintenance for 3yrs for any leakages or dislocations of pipes.All the P.V.C. fitting sand additional 2 piece socket clip s shall be go tapproved from engineer in charge etc. complete. [for Rain Water Pipes Vetical&horizontal) 160 mm OD
65
-
-
... More
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) (1)50 mm NB (SP+WP)
45
-
-
... More
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) (2) 40 mm NB (WP)
45
-
-
... More
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) (3) 32 mm NB (WP)
10
-
-
... More
Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.
4
-
-
... More
Supply, Installation jointing & testing of heavy quality Non Return valves of gun metal / brass / CI body with screwed / flanged ends 16kg class as per details mentioned in approved materials list etc. complete (For pump outlet) (1)65 mm dia NB
2
-
-
... More
Supply, Installation jointing & testing of heavy quality 'Y' Strainers of gun metal / brass / CI body having SS mesh with screwed / flanged ends 16kg class as per details mentioned in approved materials list etc. complete (For pump outlet) 65 mm dia NB
1
-
-
... More
(i) Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydro pneumatic System as Follows: a. Vertical, Multistage submersible centrifugal pumps with SS-304 casing, impeller, shaft and bottom housing (with mechanical seal) (Complete pump & motor in stainless steel construction SS 304) (Vendor to submit performance curves and technical catalogue of the proposed model for review & information) b. (Higher efficiency oil cooled motor should be used with ball bearings to reduce the starting current.) The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head. d. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor) e. Pre charged diaphragm pressure vessels with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete, of the capacity indicated in Bill of Quantities f. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete g. Accessories like pressure gauge, flow sleeve, supporting brackets & strainer to be provided for better cooling for motors. h. GI delivery header with flanges for common outlet header with flanges for outlet connections as required, and inter connecting piping with flexible connections, all necessary indigenous accessories as required to complete the installation. i. The power supply cable through aluminium conductor armoured cable shall be extended up to Control panel and all other cabling/ interconnections between control panel and Pump motors/ Control wiring shall be included in the scope of work j) The system should have VFD for each pump with in line flow meter on delivery header The system shall comprises the above accessories & should meet the following delivery requirements.Domestic Water distribution System: System capable of delivering following discharge and Head requirements .The system shall consist of number of Pumps as specified below along with diaphragm Pressure Vessels & delivery manifold with isolation and non return valves and with fully automatic control panel with starters and necessary protections in Weather Proof box (IP55) and necessary suitable copper cables from starter panel to pump (Appx.20Mtrs/each pump) etc. complete with necessary accessories. The panel shall have 2nos incomers with auto changeover switch.The panel shall be compatible with BMS (MODBUS RS 485 / MSTP) Total system capacity : 2.5 LPSNo of Pumps : 1 working + 1 standbyWorking Pump Discharge : 2.5 LPS Stand by pump : 2.5 LPS System head : 40m Diaphragm Pressure Vessel : Suitable as per system capacity
1
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A -- with Cat A Modular Accessories
80
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories
5
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface steel conduit( medium) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
300
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface steel conduit( medium) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
80
-
-
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface steel conduit( medium) as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire
25
-
-
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface steel conduit( medium) as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire
25
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit ( medium)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A -- with Cat A Modular Accessories
5
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories
5
-
-
... More
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
100
-
-
... More
Wiring for 5A /15A power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 2 Nos of 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
50
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
250
-
-
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface rigid PVC conduit( medium)/ casing caping, as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire
200
-
-
... More
Supplying and fixing of following sizes of steel conduit alongwith accessories in surface(medium)/recess(heavy) including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm
100
-
-
... More
Supplying and fixing of following sizes of steel conduit alongwith accessories in surface(medium)/recess(heavy) including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. (b) 25 mm
150
-
-
... More
Supplying and fixing of following sizes of steel conduit alongwith accessories in surface(medium)/recess(heavy) including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. (c) 32 mm
50
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (b) 25 mm
150
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A
10
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (c) 15/16 A switch Cat A
20
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A
10
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (e) 6 pin 15/16 A socket outlet Cat A
20
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A
10
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required (a) Cat A
5
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A
2
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (b) 4 Module ( 125 mm x 7 mm) Cat A
25
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module (200mm x 75 mm) Cat A
8
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (d) 8 Module ( 125 mm x 125 mm) Cat A
2
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (e) 12 Module (200 mm x 150 mm) Cat A
1
-
-
... More
Supplying and fixing stiff pendant with 300 mm long 20 mm dia x 1.6 mm thick steel conduit aluminium cast back plate and brass holder complete including wiring the down rod with 1.5 sq.mm FR PVC insulated copper conductor single core cable and painting etc. as required.
20
-
-
... More
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 A modular socket outlet and 4 nos 5/ 6 A modular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively. ( For workstations) (a) Cat A
8
-
-
... More
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A
10
-
-
... More
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing required number of modular switches , connection painting etc. as required. ( For group controlled points) (a) Cat A
10
-
-
... More
Installation, earthing, testing and commissioning of exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required
20
-
-
... More
Installation, earthing, testing and commissioning of exhaust fan upto 510 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required
10
-
-
... More
Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
8
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (c) 12 way single door Cat A
1
-
-
... More
Supplying and fixing following way TPN sheet steel, single door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (e) 8 way ( 8 + 24) single door horizontal type Cat A
2
-
-
... More
Supplying and fixing following way TPN sheet steel, single door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCCB and busbars of following ways (but without MCBs as required) (c) 12 way (8+36), single door, Vertical type, Cat A
1
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A
62
-
-
... More
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
12
-
-
... More
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
3
-
-
... More
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A
7
-
-
... More
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A
4
-
-
... More
Providing and fixing M.V. Danger Notice plate of 200mm x 150 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required
5
-
-
... More
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). (a) In soily strata
2
-
-
... More
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). (b) In rocky strata
2
-
-
... More
Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt).
2
-
-
... More
Extra for using salt and coke for pipe earth electrode as required( 160 Kgs of Coke and 5 Kgs of Salt).
2
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). (a) In soily strata
2
-
-
... More
Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)
2
-
-
... More
Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
150
-
-
... More
Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
50
-
-
... More
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
150
-
-
... More
Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required
5
-
-
... More
Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required
5
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. (a) CAT A
20
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. (a) CAT A
20
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (1) 3 1/2 Core 25 sq.mm
50
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (2) 3 1/2 Core 50 sq.mm
50
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (3) 3 1/2 Core 95 sq.mm
50
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (5) 3 1/2 Core 120 sq.mm
50
-
-
... More
Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (1) 4 Core 10 sq.mm
200
-
-
... More
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (2) 3 Core 2.5 sq.mm
200
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (5) 3 Core 10 sq.mm
75
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 1/2 x 25 Sq. mm.
4
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 3 1/2 x 50 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(5) 3 1/2 x 95 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.
32
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (a) 200mm width x 50mm depth
10
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (b) 300mm width x 50mm depth
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (a) 100mm width x 50mm depth (16 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (b)150mm width x 50mm depth (16 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (a)200mm width x 50mm depth (16 SWG)
20
-
-
... More
Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
40
-
-
... More
Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f.
0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips plete with 3 years warranty.
10
-
-
... More
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f. 0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 ears warranty
6
-
-
... More
Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of minimum 25000 hrs. with verheating protection with 2 years warranty.
20
-
-
... More
SUB HEAD - I : HT EQUIPMENT & TRANSFORMER LT PANELS & DISTRIBUTION BOARDS ALL LT PANELS SPECIFIC INCLUSIONS: The outgoing feeders as indicated below shall have suitable range of followings (except capacitor feeders). All ACB's shall be suitable for minimum 50 kA as specified in the items (Icu=Ics=Icw for 1 sec.) All MCCB's shall be suitable for unless otherwise specified in the item (Icu=Ics= 1 sec=100%.) All Outgoing Feeders of Main LT panel shall have Digital Multifunction Meter with Control SP MCB Necessary control and firing card with proper control wiring and lugs of the required rating to be provided. Each Incomer shall have Surge Protection Device. Wiring with space heater, thermostat and control MCB's shall be provided
for all vertical sections of main LT panel. All Outgoing Feeders shall have LED type Indication Lamps for ON/OFF indication with suitable wiring, SP MCB etc. All breakers shall be interlocked as per schematic diagram through PLC with Auto load management control. All incoming as well as outgoing feeders shall have padlocking facility. Suitable danger board shall be provided. All MCCB’s shall be provided with front rotary handle and operating mechanism for door interlock with Padlocking of MCCB’s handles in“OFF” Position. The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers. All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation. All distribution sub panels shall be provided with class 0.5 accuracy meters as well as CTs. All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire. Panels shall be Powder Coated with Siemens grey paint shade no. RAL-7032 of IS-5. All motor feeders MCCBs shall be of motor duty. Supporting/Base rigid steel framework. TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link. Final rating & various parameter, in addition to the specified above shall be selected on the bases of ambient conditions at site, approved equipments rating, client specific requirements, standards specified in the tender, requirement for the NOC from various statutory authorities & as per detail designed stagecalculations. All Back access panel shall be housed with encapsulated Spark gap based class-1/type-1 SPD with in built fuse for each incomer at each Bus Section of 100kA 10/350mS as per IS/IEC 62305-3 LPL-I. All front operated panel/Sub panels shall be housed with Mov based class-2/type-2 SPD with in built fuse for each incomer at each Bus Section of In 10kA&Irms20kA 5/20mS as per IS/IEC 62305-3 LPL-I. BACK ACCESS PANELS WITH ACB'sDesign, fabrication, assembly, wiring and supply, erection , testing and commissioning of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 43 ingress protection) main switchboards conforming to IEC-61439 suitable for use at 433 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 36kA (specified with the panel) at 433 volts, fabricated from 2 mm outer thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including earth strip of required size with 2 nos. earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with nine tank process complete with interconnections etc. as per specifications, as required and as below. The incoming and outgoing feeders shall be accommodated in a modular arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate, including PVC insulated copper FRLS wires of minimum 1.5sq.mm & 2.5sq.mm for CT's etc. complete as required as per specifications and drawing attached. A fairly uniform coating of 80 or better microns shall be provided.(Note: The contractor may select the next higher fault rating of ACB/MCCB if it is not readily available ,without any extra cost.) Lighting & Power Panel INCOMER 1 No. 125 Amp FP moulded case circuit breaker of (25KA Ics Value) with O/L, S/C, E/F protection as per specification. METERING & INDICATION 1 Set - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage current, Hz, KW, KWHr, PF.) with RS 485 port with matching cast resin CT's 1 Set - 0-500V 96 sqmm Voltmeter with selector switch, 3 No. phase indicating LED lamp to show the incoming power with control SP MCB. 1 Set of indicating LED lamps for On/Off with protective SP MCB's. 1 Set of CTs of the ratio 300/5A with class 0.5 Accuracy for Metering, burden 15 VA BUSBAR 63A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 2 Nos. 63A 4P MCB 4 Nos. 40A 4P MCB 2 Nos. 32A 4P MCB . Supplying, Installation, Testing & Commissioning of Indoor Sports Complex - Lighting & Power Panel as described above
1
-
-
... More
EXTERNAL LIGHTING PANEL (Indoor Type weather proof, double door with canopy and suitable MS Structure stand duly painted) INCOMER 1No. 63 A FP MCCB (16 KA) 1No.63ATPNContactor,Auto/ManualSwitch & DigitalTimers for24 Hrs.
setting Metering & Indication 1 set of RYB phase indicating lamps MFM with Digital Communication Facility along with control SP MCB BUS-BAR 1Setof100ATPNAluminiumBusBarwithcolourcodedPVCSleeves OUTGOINGS 4 Nos. 63A TPN MCB 4 Nos. 40A TPN MCB 4 Nos. 25A DP MCB Supplying,Receiving, fixing, testing & commissioning of above described Panel
1
-
-
... More
Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable. 63A FP MCB+RCCB 300mA
2
-
-
... More
Supply, Installation Testing and Commissioning of IP 20 Rated, 3D Printed Pendant Luminaire suitable for E27 lamp. The Housing material of the shade should be recyclable 100% Virgin Polycarbonate. The pendant shade should be available with choice of essential colors, primary colors and shiny metallic colors with a possibility of printing Logo through 3D printing process. The pendant shade should have flexibility of having textures to provide a improved aesthetic appeal. In terms of design , Luminaire should have a modular assembly and the shade should be replaceable without tooling and while being able to re-use all other luminaire parts. The Pendant shade should be within size limit of 250 mm x 250 mm and should be tested in conformity with the essential requirements of the European Directives and harmonized standards: EN 60598-1: 2015 and EN 50581:2012. Similar to Philips 3D printed luminaire
10
-
-
... More
Supply of LED exit signage of Box size in mm 325 x 425 x 365
4
-
-
... More
Supply & Installation of hot dip Galvanized GI Single Section Octagonal poles of 9 mtr. long, Earthing studs, TPN loop-in and loop-out smart pack junction box with MCB & necessary 50mm dia GI pipes bent to shape for cable entry/ exit and including 3C x 2.5 sq.mm PVC multistranded copper wire between terminal block and luminaire and with coil earthing using 80 turns of 8 SWG GI. wire as per standards. (complete including all civil work for foundation etc) & Stand terminals as per specifications with one 10A (10kA) SP MCB and 20A TPN terminals. Supply and erection of RCC Civil foundation & "U" Bolts & Nuts.
8
-
-
... More
Supply, fixing, testing & commissioning of 40W LED for Gate light luminaires with IP66 with necessary fixing suitable fixing of GI pipe & clamp required. Cat No :
2
-
-
... More
Supply, fixing, testing & commissioning of 90W (8400Lm) LED street light luminaire with pressure die-cast aluminium housing with heat resistant toughened clear glass fixed with SS screws. with operating voltage range (140 - 310V AC). The luminaire shall be minimum IP66 protected. CRI greater than 75 and with colour temperature 5700K range. In addition to built-in 5kV surge protection in driver, it is equipped with 10kV external surge protection. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95 with THD less tha 15%. System consumption should be 90W with lumen package of 8400Lm.
10
-
-
... More
40W LED Batten luminaire made up of LED luminaire comprises of polycarbonate housing and polycarbonate diffuser. Luminaire has efficacy 110lm/W and nominal system lumens greater than 4400 lumens, CRI 80, CCT 5700K and lifetime of 50,000 hours at L70. Potted Driver, THD10 %, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 140V to 270V (nominal rated voltage – 240V) 4K internal. Operation temperature of range -10degC to 50degC. IP rating of IP20. Driver should comply Driver safety requirements as per IS 15885 with BIS certification. Manufacture should have in house NABL testing facility. LM 79 report from NABL accredited Lab shall be submit. The luminaire should comply with all the required IEC and IS standards. similer to bajaj BCLAB SP 44L LED CW PC
5
-
-
... More
5 KVA DOUBLE CONVERSON UPS with two input sources 3 phase & N - 4wire, Output 3 phase & 5wire with IGBT Rectifier and anti harmonic filters of THD 3%.(all the technical datas of the system to be enclosed with the offer) The UPS shall be supplied with SNMP card ,BMS compatibility & remote monitoring panel with necessary power/communication cables and accessories as required.
1
-
-
... More
Supply of sealed maintance free batteries for 30 minutes battery backup at full Load for the above UPS with battery cubicle and associated accessories
1
-
-
... More
Complete wiring required between the UPS systems and it's battery banks & Battery Stands. Input and output wiring for the UPS system shall be provided by other agency. The cost shall be inclusive of Structural steel supports as per approved design for equal Load baring of 400kg/sqm for UPS system, battery cubicles also match level of the false flooring in UPS room.
1
-
-
... More
Material Handling, Installation & Commisioning
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements