Goa State Urban Development Agency Tender
View complete overview of Goa GSUDA Tender
Costs
EMD
₹ 17,43,303Document Cost
₹ 20,000Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_GSUDA_12785_1Bid Award Id
ViewTender No
F.43/3/GSUDA/E-TENDER/26/1723Tender Authority
Goa State Urban Development Agency ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Loading and unloading of excavated earth.By mechanical transport including loading , unloading and stacking upto a lead upto 10 kms
2286
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
785
-
-
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Pre-construction
4556
-
-
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Post-construction
940
-
-
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
286
-
-
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level
513
-
-
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
4
-
-
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-30 grade of concrete
806
-
-
Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-25 grade of concrete
153
-
-
Centering & shuttering including Strutting, Propping & removal of forms for:(i) Foundations, Footings, Bases for columns
1500
-
-
Centering & shuttering including Strutting, Propping & removal of forms for: (iii) Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
407
-
-
Centering & shuttering including Strutting, Propping & removal of forms for: (ii) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
376
-
-
Centering & shuttering including Strutting, Propping & removal of forms for: (iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
1327
-
-
Centering & shuttering including Strutting, Propping & removal of forms for: (xiii) Suspended floors, roofs landings, shelves & their supports
1070
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m,for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs landings,beams & balconies.(From 3.50m upto 4.50m)
465
-
-
Providing TMT steel reinforcement (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
110776
-
-
Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in foundation and plinth.
50
-
-
Brick work using fly ash bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) with bricks of class designation 40 Kg / sq. cm, in superstructure upto floor V level. Brick size 230mm X 110mm X 80 mm
137
-
-
Providing and laying half brick masonry using fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos of 6mm dia M.S bars at every third course embedded in cement mortar above plinth upto floor V level.(With bricks of class designation 40 kg/sq.cm.)
159
-
-
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces,in all positions including scaffolding and curing etc. complete.
414
-
-
Providing internal cement plaster 6mm thick in a single coat in cement mortar1:3without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
201
-
-
Labour charges for providing groove in external plaster having width and spaced as
directed by engineer incharge etc. complete.
300
-
-
Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand)
finished with sponge.
2959
-
-
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth
complete.
933
-
-
Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
387
-
-
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
732
-
-
Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
2402
-
-
Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.
50
-
-
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
2974
-
-
Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work.
2974
-
-
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
50
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
3605
-
-
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. 600x 600 mm Dark Shades
1112
-
-
Providing and laying vitrified Antiskid floor tiles in different sizes of Johnson, Somany,Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. 300 x 300 mm dark Shades - 10mm thick
240
-
-
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc. complete. 20mm thick
93
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab.-Elite Brown
50
-
-
Rubber Skirting:
Factory supplied 75mm x 100mm rubber base molding to include air channelling in back of base to provide full ventilation of the sub-floor system. Fixed to the wall with a base molding adhesive as recommend by manufacturer
31
-
-
Aluminium Skirting:
Supply of 2.6 mm thick Aluminium Profile for periphery of sports flooring, width of Aluminium profile 126 mm and 6feet long with counter hole and Anodising
13
-
-
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.:600 x 600 mm - Dark Shades
621
-
-
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.600 x 600 mm - light Shades
7
-
-
Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
6
-
-
Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete-Elite Brown
2
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm-Jet Black
51
-
-
52mm thick cement concrete flooring/ IPS Flooring with metallic concrete hardener topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layers 12 mm thick metallic cement hardener constituting of mix 1:2 (1 cement: 2 graded stone aggregate 6 mm nominal size by volume with which metallic quality is mixed in ratio 4:1 (4 parts of cement: 1 part of metallic) hardening compound of approved floor hardening compound of approved quality) by weight, including finishing complete.
114
-
-
Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) etc.complete
20
-
-
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the Engineer
60
-
-
Full/half rounding and polishing of edges of granite slab as per the requirement.
9
-
-
GYMNASIUM FLOOR Supply and Installation of Gerflor make multi-layered interlocking loose lay vinyl tile with polyurethane treatment (PUR+), 6 mm thick with a dovetail joint, abrasion group it consist of 2 mm thick vinyle wear layer , reinforced with 2 glass fiber grids on either side of an intermediate pressed homogeneous layer and 4 mm thick black pressed homogeneous sheet, Weight should not less than 9265 g/sq.m and size of tile 635 x 635 or 600 x 600mm and below specication Fire rating EN 13 501-1 Class Bfl-s1 Static electrical propensity EN 1815 kV _ 2 Slip resistance wet: ramp test with oil DIN 51 130 Class R10
114
-
-
Providing and laying Porcelain pool tile of size 245 mm x 120 mm and thickness 7 mm conforming to FINA (Federation International De Nation) Standard on horizontal and Vertical surface (Floor and Side Walls) in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like Light Blue / Aqua Blue etc. laid in approved pattern on 3- 6 mm ( 5mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.
625
-
-
Providing and laying Porcelain pool tile of size 245 mm x 120 mm and thickness 8 mm conforming to FINA (Federation International De Nation) Standard on Horizontal and Vertical surface (Side Wall) for Lane Marking in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like Cobalt etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.
42
-
-
Providing and laying Porcelain Petit Carre Finger Grip Tile with Safety Marking of size 245 mm x 120 mm and thickness 18 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like Cobalt etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.
336
-
-
Providing and laying Porcelain Petit Carre Antislip Tile with of size 245 mm x 120 mm and thickness 7 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like unglazed etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.
336
-
-
Providing 20mm thick marble slab to urinal partitions with cement complete
5
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
9
-
-
Providing and fixing M.S. fan clamp type 1or II of 16 mm dia M.S. bar bent to shape with hooke ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.
10
-
-
(As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut
outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection85% noncombustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
324
-
-
Supplying, fabricating, manufacturing and fixing in position paneling at given level made from Glass fibre reinforced concrete (GRC) , Quartz Sand, AR Fibres, Water Plasticizers & pigments, in shape, size and length as per the design and drawings and as per specifications, mix design and test results given below. The typical panel should be of sizes as per the drawings. Their minimum thickness of panel to be : 20mm with 50mm GRC pads acting as stiffeners, minimum Weight a 4.5kgs/sq.ft and of approved Colour & texture (to match existing building finish in sand face plaster).Followed by fixing of GRC panels on primary structure by dry cladding method with help of S.S. Screws Fixtures, M.S Angle Cleats, Fissure Plug, and Dowel Pin proper alignment as per Drawings (drawings to be submitted by the contractor before the work start) Finishing with GRC powder & filling the joints with Epoxy sealant neatly between GRC Panels and primary structures. The paneling should be in absolute straight plumb line and length and joins between channels should be neatly filed to make seamless uniform surface across the entire elevation of the building without any visibility to joints. The rate include scaffolding, lab test etc. complte.
1. MIX DESIGN- white Cement 50 + 5 %. Fine Quartz Silica sand :- 50 + 5%. 3. Alkali Resistant (AR) Glass Fiber – 2 to 5%. Percentage varies depending upon the type of Component of GRC and method choosen for manufacture i.e. is spray or vibration casting or both, 4. Polimer:- 0.5% Approx, 5. Plasticizer :- 0.5% approx, 6. Pigments and other Addities:- As per requirements. 2 SPECIFIATION & TEST RESULTS- 1. Dry Density:-1.8 to 2.2 t/cum.2. Compressive strength.
219
-
-
Providing water proofing treatment over the new R.C.C. roofs, terrace, toilet by spreading cement slurry over the R.C.C. slab and laying of10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. inthe R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.(Terrace, Sunken Portion of WC's, Toilet, Kitchen etc)
1160
-
-
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (To be used in Concrete of Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS)
165
-
-
Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) For vertical surface two coats @ 0.70 kg per sqm
376
-
-
Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) For horizontal surface one coat @1.10 kg per sqm
27
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.Second class Indian teak wood
1
-
-
FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.
Specified Cross Section
d) 5” x 2 ½ “
12
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
41
-
-
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS
13034 1990 test Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
shutter thickness :: b) 35mm
4
-
-
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
17
-
-
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete 75 x 40 x 2.5 mm (ordinary type)
48
-
-
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.250 x 10 mm
18
-
-
Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.
15
-
-
Providing and fixing chromium plated brass handle with necessary screws etc. complete.-125mm
18
-
-
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
45
-
-
Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).
15
-
-
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
6
-
-
Extra for providing mechanical device, chain and crank operation for operating rolling shutters.Exceeding 10.00 sq.m. and upto 16.80 sq.m. in area
6
-
-
Providing and fixing Ball bearings for rolling shutters
1
-
-
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
1131
-
-
Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon
bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully
water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be
measured.
91
-
-
Extra over design, supply and installation of Spider glazing system, for provision of 12mm thk clear toughened glass door shutter fittings including the cost of top & bottom patch fitting, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg, floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required.
4
-
-
Providing and Fixing mat finish stainless steel (of 302grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameter etc.complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)
19
-
-
Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading and including filling gaps with silicone sealant of approved make etc complete. (Shop drawing to be submitted by contractor for approval.)
29
-
-
Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)
3
-
-
Steel work(SAIL, TATA. VIZAG only) riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In tees, angles, flats and channels
2
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
3087
-
-
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
580
-
-
Providing and fixing prefabricated gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready
mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
38
-
-
Providing and fixing Toilet cubicals as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required colour ,shade and sizes as manufactured by Besco by Merino or Greenlam Sturdo or T Line or equivalent as approved, including stainless steel accessories ( SS-304 grade) like square top rail. Front panel and divder wall with stripe shoe touching floor ( No gap shall be at bottom of divder/front panel except door) , knob, thumb turn and indicator, twin coat hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawings . The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction of Engineer in charge. The cubical unit shall be minimum 10 years guarantee for the board against any moisture and 5 years guarantee for the hardwares. (Cubical size =(900mm width x1500mm depth), Cubical Height =2100mm, External Laminate finish = Metallic).
42
-
-
Design, Fabrication,Supply, Installation, Cleaning & Handover of Aluminium extruded tube Louvers Jali system custom designed to with stand the design wind pressure confirming to IS -875 part III. Aluminum Louvers shall be made out of extruded tube shape having size of 50 x 25 mm spaced at equivalent distance as per drawings . Jali tubes are fixed with angle on aluminium tube framing with necessary fasteners in SS 316 & MS / Aluminium alloy brackets with provision to accommoadate movement at all floor levels. The bracketing system with Aluminium Alloy of 6061 T6 / MS HDG with built in serration & serrated washers. All nut bolt, screws shall be of SS 316 grade.The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. All the internal & external visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming to AAMA 2604 with minimum of 25 years warranty. The non visible aluminium surfaces shall have minimum chromatizing treatment. The quote rate shall include all design, engineering & shop drawing approval from architect & consultant, mock-ups, sample submission, handling of all materials (loading, unloading, shifting, etc), scaffoldings, access equipments etc. The quote rate shall include all duties, statutory obligations and safety code compliance as per Industrial standards.
56
-
-
Providing & fixing Art panel in vinyl print on Acrylic/ Sign Board with PU Coat as per the design drawing & detailed technical specifications.All shade approval shall be as per client / architect's Approval.The quote rate shall include all design, engineering & shop drawing approval from architect & consultant.
57
-
-
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum
extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063).
Floor Joint of 100 mm gap
150
-
-
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap
100
-
-
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint
System shall resists damage or deterioration from the impact of falling
ice, exposure to UV, airborne contaminants and occasional foot traffic
from maintenance personnel. Provision of Moisture Barrier Membrane
in the Joint System to have water tight joint is mandatory requirement.
(Material shall confirm to ASTM 6063).
100
-
-
Supplying & Installation of Heavy Duty Commercial Treadmill- Treadmill 6.5hp Quiet Reliable AC Motor is able to Resist the Hardest Training Session and have Accurate Control of Speed from 0.8 to 25km/jr . With Max Silence.Reinforced and Oversized Cambered Surface-The Widen Frame with steel tube ST- 52 Reaches 17cm. The Commercial Grade Cambered Surface Deign Steel Provides Maximum Strenght and Elasticity during exercise-Running Surface-58cm Width and 160cm Length Comfortable Running.Incline Rane 0-
18 Level Built In Variable 36 Training Programs-With Unique HST Phoenolic Wax System The Treadmill is Maintenance free and Eliminate the need of Lubrication-Contact Pulse Measurement-Lenght 212cm, width-94cm, Height-153cm. programs - 1 manula, 36 Preset Programs, 3 user Profiles, 1 Random, Data Readout Time/Speed/Distance / calories/ Pulse / Body Fat Maxiumum User Weight - 160kgs
2
-
-
Supplying & Installation of Commercial Elliptical Trainer - COMMERCIAL
ELLIPTICAL
Resistance : 32 Levels
Flywheel : 9 Kg
Transportation : 2 Wheels
Weight : 137.50 Kg
Dimension : 2145 x 666 x 1740 mm
1
-
-
Supplying & Installation of Spin Bike - SPIN BIKE
Crank Arm : 3 pcs
Resistance : Stepless
Flywheel : 20 Kgs
Transportation : 2 Wheels
Weight : 65.50 Kgs
Dimension : 1170 x 560 x 1140 mm
2
-
-
Supplying & Installation of MULTI PRESS
1
-
-
Supplying & Installation of LAT / MID ROW
1
-
-
Supplying & Installation of BICEP / TRICEP
1
-
-
Supplying & Installation of LEG PRESS
1
-
-
Supplying & Installation of INNER / OUTER THIGH
1
-
-
Supplying & Installation of PEC AND REAR DELTOID
1
-
-
Supplying & Installation of ASSISTED CHIN DIP
1
-
-
Supplying & Installation of ASSITED CHIN DIP
1
-
-
Supplying & Installation of FUNCTIONAL TRAINER
FREE WEIGHTS |
Dimension : 4053 x 1084 x 2312 mm
Net Weight : 400 Kg
Standard Steel Weight Stack : 70 Kg / side
Dimension : 2540 x 1220 x 2260 mm
Net Weight : 400 Kg
Standard Steel Weight Stack : 70 Kg / side
1
-
-
Supplying & Installation of Smith Press with Power Rack Combo
1
-
-
Supplying & Installation of Olympic Bench Incline
ACFIT INCLINE OLYMPIC BENCH AF-7042
Dimension : 1960 x 1700 x 1400 mm
Net Weight : 130 Kg
1
-
-
Supplying & Installation of BSFID - Flat / Incline / Decline Bench
1
-
-
Supplying & Installation of FLAT BENCH
1
-
-
Supplying & Installation of 3 TIER DUMBBELL RACK
1
-
-
Supplying & Installation of PLATE TREE
1
-
-
Supplying & Installation of BARBELL RACK
1
-
-
Supplying & Installation of RUBBER HEAD ROUND DUMBBELLS - 2.5KGS, 5KGS,
7.5KGS,10KGS,12.5KGS,15KGS,20KGS,25KGS ( TILL 10KGS
2SETS,THEN AFTER 1SET EACH) - 10KGS-3SETS ONLY
265
-
-
Supplying & Installation of RUBBER TRI GRIP OLYMPIC WEIGHT PLATES -
2.5,5,7.5,10,15,20KGS- 2 SETS EACH
240
-
-
Supplying & Installation of OLYMPIC 50MM SLEEVES - WITH STANDARD KNURLING
BARBELL RODS- 7FEET, 5FEET, 4 FEET, EZ CURL BAR, TRICPE
BAR- 1NO EACH
1
-
-
Supplying of GYM BALL -65CM, 75CM, 85CM - 1NO EACH
1
-
-
Supplying & Installation of MEDICINE BALLS - 2KG, 3KGS, 5KGS- 1NO EACH
1
-
-
Supplying of EXERCISE FLOOR MATS
5
-
-
Supplying of WEIGHTED SKIPPING ROPE
5
-
-
POOL FILTRATION SYSTEM & PUMP, TOTALLY ANTI-CORROSIVE Bobbin Wound
filter,PRAGA/Ion Exchange model 2000mm diameter. Fitted with
pressure gauge panel manual air bleeder, water drain
and emptying plug. fitted with collector arms and
diffuser made from unplasticized PVC and
polypropelene with all accessories required. Filtration
velocity 30m3/hr/m2. Max. working pressure : 2.5
kg/cm2. Flow rate = 115m3/hr. Connection size:
140mm.
1
-
-
Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 140mm
1
-
-
Valve battery supports made in Zinc Plated Steel. Height : 2.30m
2
-
-
Support Brackets : 2 Support Brackets with anti-vortex clamps and fixing screws
2
-
-
Active Clear Glass Media
• More efficient and environmentally friendly filtration.
• Greater filtration capacity.
• Water and energy savings.
• Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed Grade 1. (Price per bag of 25 kgs )
101
-
-
Active Clear Glass Media
• More efficient and environmentally friendly filtration.
• Greater filtration capacity.
• Water and energy savings.
• Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed Grade 2. (Price per bag of 25 kgs )
33
-
-
Active Clear Glass Media
• More efficient and environmentally friendly filtration.
• Greater filtration capacity.
• Water and energy savings.
• Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed Grade 3. (Price per bag of 25 kgs )
37
-
-
Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-
54 motor protection. Stainless steel AISI-420 shaft.With stainless
steel AISI-316 strainer basket. Conn. PN-16 according to
DIN2501.Flowrate : 123m3/h @ 12m.head. 10 HP Voltage 400V/ 3
ph.(1 Working +1 Standby)
2
-
-
Membrane Dosing Pumps "EXACTUS"/Ion Exchange model. Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 bar
2
-
-
Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts.
2
-
-
Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC, length of stirring rod 900mm
2
-
-
Supply, Installation, Testing and Commisioning of UV Steriliser. Design pressure up to 4 bar. The UVC units are distributed with two male threads of 1.5” / 50mm. Maximum flow rate: 25m3/hr. 75W
5
-
-
Drain grille in SS 304. 300mm x 300mm Flow: 43m3/hr
2
-
-
Floor Inlet in ABS
16
-
-
Overflow Gutter Drains 200mm circular drain grille
10
-
-
Suction inlet in ABS with cap internal thread of 11/2" dia and external thread 2"
4
-
-
ABS wall conduits 300mm long.
4
-
-
Ladder width 500 mm Ø 43 mm handrail, non-slip surface stainless treads, bright satin finish, anchoring
fixtures for connection to the equipotential circuit and removable anchoring with plate for fastening to wall.
AISI-316 handrail and steps.2 “Luxe” steps + 1 double safety step
4
-
-
Made in white, U.V. Stabilized PP. Running Length : 80 m. Width: 295 mm, Height : 22mm
80
-
-
Made in plastic. Suitable for grating
80
-
-
Corner Tiles. 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm
4
-
-
Underwater LED Warm White DC LumiPlus Flexi spotlightLight 32W with Driver. Niche type. 4320 lm.
16
-
-
White Faceplate for light
16
-
-
Standard niche
16
-
-
Supplying of Deck Box with security cover Deck Box
16
-
-
Supplying of 1m Flexible conduit
16
-
-
Supplying of cable joining kit
16
-
-
Supplying of 'Anodised aluminium Vac -Head 450mm - Clip connection
1
-
-
Supplying of Telescopic Pole 3m x 3 pieces
1
-
-
Supplying of Vacuum Hose 38mm- 1.5" 30m Make: Astral/Ion Exchange, Deep Net
1
-
-
Supplying of Deep Bag Leaf Net - Shark Series Make: Astral/Ion Exchange, Brush
1
-
-
Supplying of Curved Brush - Shark Series, Make: Astral/Ion Exchange, Test kit
1
-
-
Supplying of Test kit for free chlorine & pH, Make: Astral/Ion Exchange, CONTROL and REGULATORY VALVES,
1
-
-
supply and fixing Ball Valve dia 50 mm (filling line-3). Code: 36505, CONTROL and REGULATORY VALVES. Make:CEPEX/Ion Exchange
3
-
-
supply and fixing Ball Valve dia 75 mm (Suction Inlet-1). Code: 36507
1
-
-
supply and fixing Butterfly Valve dia 110 mm (Pump Suc&Del-4). Code: 32616
4
-
-
supply and fixing Flange and adaptor for 110 mm. Code: 02024+02036
8
-
-
supply and fixing Butterfly Valve dia 160 mm (Drain-1, Inlet-1, BT Suction-1). Code: 32618
3
-
-
supply and fixing Flange and adaptor for 160 mm. Code: 02027+02040
6
-
-
supply and fixing Wafer Type Check Valve dia 110 mm (Pump del). Code: 08986
2
-
-
supply and fixing Flange and adaptor for 110 mm. Code: 02024+02036
4
-
-
supply and fixing Wafer Type Check Valve dia 160 mm (BT Suction). Code: 08988
1
-
-
supply and fixing Flange and adaptor for 160 mm. Code: 02027+02040
2
-
-
Supply of Starting Block Specially designed for
competition events. Available with adjustable footrest to
facilitate entry into the water. Its minimalist design in high
quality materials gives it an elegant and modern look.
Manufactured in AISI-316
stainless steel. Polished surface finish.
Adjustable support (6 position) Make: Astral/Ion Exchange
8
-
-
Supply of Anchoring
for installation the podium is concrete, made in SS 316 Make: Astral/Ion Exchange
8
-
-
Float lines supplied with floats and nylon rope. Length:25m Model:Roma/Ion Exchange
8
-
-
Float Line anchors made in S.S.-316
16
-
-
Float Line Flange anchoring Socket made in S.S.-316
16
-
-
Lane Hook
8
-
-
Made of S.S.-304. Mounted on 4 rotating wheels for maximum mobility and transport. 1.2m width Make: Astral/Ion Exchnage
1
-
-
Backstroke turn indicators comprise of 4 posts in S.S-316 Make: Astral/Ion Exchange
1
-
-
False start indicators comprise of 2 posts in S.S-316 Height : 1.8m Make: Astral/Ion Exchange
1
-
-
Backstroke turn indicator bunting. 2 polyester cord and bunting 12.5 m Make: Astral/Ion Exchange
2
-
-
Supplying of False start indicators - 12.5m length., Make: Astral/Ion Exchange
1
-
-
Supplying of Level Anchor Fixing 43mm diameter for Backstroke & false start post fixing., Make: Astral/Ion Exchange
8
-
-
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level
154.5
-
-
Providing & laying of minimun 60mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant. 2) Size: 210mm x 105mm x 60mm (Type: Rectangular Shape) b) Other Colours
1030
-
-
Supply and installation of Grand Stand /Demountable Spectator Seating System of total seat capacity of 52 seats . The system will have 48mm dia pipe main truss frame, vertical and horizontal and cross pipe. Beam structure as per manufacturer specification fixed at c/c Distance 2075 mm. All vertical, horizontal and cross support frame to be connected with the help of transverse joints , ring Connector and to be locked with wedge pin. Screw Jack for adjustment of height/level.Total structure to be Painted Grandstand sizes should be as follows The Deck width should be minimum 800 mm wide Riser Height should be minimum 300 mm height Aisle Width: 1000 mm, Seat Center to center distance 460 -480 mm Overall Size : 6100mm (Length), 3950mm (Height), 4500mm (Width) Aluminum Floor Deck 1.5 mm -2 mm thick and 38 mm high anti Skid Extruded Aluminum Floor deck with supporting legs , The deck and understructure joined together through M10 high tension torque fasteners.Safety Railing around Grand Stand as seen in layout.The safety railing will be made with 40 X 20 mm rectangular & 20 x 20 mm sq. and powder coated.
HDPE Blow Molded SeatProviding and fixing double-wall hollow blow mold bucket type seat minimum having dimensions as 465 mm side length x 440 mm front width x 400 mm rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall and minimum density of 0.95 gram/cm3, weight of plastic chair should not less than 2 kg, chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design., Seat to be fixed on Galvanized pipes of 25 Nominal Bore as per IS1239 (PART 1): 2004 running under the chairs.Front cover panel GI SHEET 1 mm thick bended with bending machine as per front cover design and fixed to the main frame width of front cover panel should be 180 mm wide Stair Case for climbing the demountable system.
The structure to be fabricated from 40 x 40 x 2mm thick and Painted.
The structure to have 38 mm high anti Skid Extruded Aluminum steps. The total structure should be as seen in attached layout
250
-
-
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support -
W.C. Pan with white plastic seat and lid
12
-
-
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I.
brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
8
-
-
Providing and fixing white vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.
10
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. (a)Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
1
-
-
Providing and fixing G. I. Inlet connection for flush pipes connecting with W. C. pan.
12
-
-
Providing and fixing C.P. brass or M. I. Trap for wash basin and sinks: (b)40 mm dia
10
-
-
Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.
25
-
-
Providing & Fixing In Position 25 mm diameter mosquito proof coupling of approved municipal
design.
15
-
-
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
20
-
-
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (b)600 x 20 mm size
18
-
-
Providing and fixing toilet paper holder : (a) C.P. brass
12
-
-
Providing & fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C. P. brass screws (a) Glass container
3
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 (a)15mm nominal bore
10
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 (a)15mm nominal bore
10
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 (a)15mm nominal bore
12
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 (a)15mm nominal bore
12
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 (a) Wall mixer with 115 mm long bend pipe for connection to over head shower.
21
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993
8
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993
12
-
-
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
21
-
-
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). (g) 80 mm nominal bore
50
-
-
Providing and fixing ball valve (brass) of approved quality : (a) High pressure with P.V.C. floats: (1)15 mm nominal bore
5
-
-
Providing and fixing ball valve (brass) of approved quality : (a) High pressure with P.V.C. floats: (2) 20 mm nominal bore
5
-
-
Providing and fixing ball valve (brass) of approved quality : (a) High pressure with P.V.C. floats: (3)25mm nominal bore
5
-
-
Providing and fixing non-return valve of approved quality : a) 25 mm nominal bore
2
-
-
Providing and fixing non-return valve of approved quality : b) 32 mm nominal bore
3
-
-
Providing and fixing non-return valve of approved quality : c) 40 mm nominal bore
3
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: a) 100 mm diameter
21
-
-
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete : a) 100 mm diameter
15
-
-
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete : b)150 mm diameter
10
-
-
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete : c) 230 mm diameter
5
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b) 150 x 100 mm size –P or S type
10
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm
nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as
per standard design. a) Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )
4
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm
nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as
per standard design. b) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
2
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm
nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as
per standard design. c) Inside size 1.2m x 90 cm and 90cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg. (weight of cover 58 kg).
2
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm
nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as
per standard design. d)Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
2
-
-
Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: a) For pipe 100 to 150 mm dia
9
-
-
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a)100 mm dia
5
-
-
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : b) 75 mm dia
5
-
-
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: a)110 mm dia.
5
-
-
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: b) 75 mm dia.
5
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110 mm dia Each 128.00
10
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : b)75 mm dia Each 118.00
10
-
-
Providing and fixing R.P.V.C. vent cowl: a)110 mm dia
5
-
-
Providing and fixing R.P.V.C. vent cowl: b) 75 mm dia
5
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). b) 20 mm outer dia CPVC pipe
20
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). c)25 mm outer dia CPVC pipe
20
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). d)32 mm outer dia CPVC pipe
30
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). e) 40 mm outer dia CPVC pipe
20
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). f) 50 mm outer dia CPVC pipe
20
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a)15 mm dia nominal outer dia pipes.
80
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. b) 20 mm dia nominal outer dia pipes.
120
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. c) 25 mm dia nominal outer dia pipes.
150
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. d)32 mm dia nominal outer dia pipes.
50
-
-
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) e) 40 mm nominal outer dia pipes
80
-
-
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) f) 50 mm nominal outer dia pipes
200
-
-
Providing and fixing P.V.C.Rain water pipes of 160mm outer diameter and having wallthickness of 2.2to2.7mm confirming to I.S .135921992 including proper rain water receiving recess with P.V.C. plug,bend,necessary fittings ,such as,offsets,shoes,inluding fixing the pipe on wall using approved wooden cleatsprojecting 25mm to 40 mm from face of wall a fixing with clips of approved quality and number,filing the join t using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks,including necessarys caffolding and maintenance for 3yrs for any leakages or dislocations of pipes.All the P.V.C. fitting sand additional 2 piece socket clip s shall be go tapproved from engineer in charge etc. complete. [for Rain Water Pipes Vetical&horizontal) i)160 mm OD
100
-
-
Providing and fixing 15cm rigid PVC Nahani trap including PVC grating,bend,connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface anesting etc.complete(Prior approval of sample and brand by Ex.Engr.is necessary before use)
5
-
-
Supply and fixing,testing commissioning of aquaguard Magna HD 25ltr RO + Uv water purifier and black comolete as per specification & direction of the engineer in charge
2
-
-
Providing and fixing vertical storage type hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug. Capacity 25 Litres Venus Model Magma 25GV
18
-
-
Providing and fixing fully automatic Hand dryer Euronics Model-EH 26 NW or equivalent ,including all fittings complete in all respect.
4
-
-
Providing and fixing Aerosol Perfume Dispenser Euronics Model-EA 24 or equivalent ,including all fittings complete in all respect.
4
-
-
Providing and fixing Straight Grab Bar, 600 mm length and 35 mm dia made of antibacterial nylon. The item should have base plate support with SS screws (304 grade) & PVC wall plugs.
1
-
-
Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint. i)100 mm dia
8
-
-
Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint. ii)150 mm dia
5
-
-
Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint .iii)75 mm dia
20
-
-
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) i) 50 mm NB (SP+WP)
60
-
-
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) ii) 40 mm NB (WP)
30
-
-
Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) iii)32 mm NB (WP)
10
-
-
Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.
4
-
-
Providing & fixing heavy forged brass ( chrome plated ) tested ISI marked Ball valves as per ( IS:554 /B5:21/ISO : 7 full bore design ) of approved quality for 15 mm to 40 mm etc complete ii)40 mm nominal bore
9
-
-
Providing & fixing heavy forged brass ( chrome plated ) tested ISI marked Ball valves as per ( IS:554 /B5:21/ISO : 7 full bore design ) of approved quality for 15 mm to 40 mm etc complete ii) 50 mm nominal bore
6
-
-
Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge ) i)110 mm
80
-
-
Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge ) ii)75 mm
100
-
-
Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge ) iii)150 mm
20
-
-
Providing & fixing in position 80mm NB "P" type trap of self cleaning type (inlet to "P" trap to be 100mm dia) including brass 125mm dia CP grating, drip seal jointing embeding in concrete etc. all complete.
6
-
-
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) i)160 mm OD
40
-
-
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) ii)200 mm OD
10
-
-
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) iii)250 mm OD
10
-
-
Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.
0.5
-
-
Supplying & erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided suuply and return air.
3.5
-
-
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white) 25mm outer dia.
10
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (I)Coupler Outer Dia in mm (b) 25mm dia.
2
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (II)Elbow 90 Degree Outer Dia in mm (b) 25mm dia.
1
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (III)Elbow 45 Degree Outer Dia in mm (b) 25mm dia.25mm dia.
1
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (IV)Tee Outer Dia in mm (b) 25mm dia.25mm dia.
1
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (V)Cross Tee Outer Dia in mm (b) 25mm dia.25mm dia.
1
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (VI)End Cap Outer Dia in mm (b) 25mm dia.25mm dia.
2
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (VII)Male Threaded Adapter Outer Dia in mm (b) 25mm dia.25mm dia.
2
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (VIII) Female Threaded Adapter Outer Dia in mm (b) 25mm dia.25mm dia.
2
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (IX) Reducer Bush, Sizes in mm (c)32x25
1
-
-
Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . (X) Reducer Bush, Sizes in mm (c)32x25
1
-
-
GSS Ducting:- Supplying fabrication installation testingand commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..
Hardware, Self Adhesive elastomeric foam gasket,Support etc as per SMACNA specification. 24 Gauge
130
-
-
GSS Ducting:- Supplying fabrication installation testingand commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..
Hardware, Self Adhesive elastomeric foam gasket,Support etc as per SMACNA specification. 22 Gauge
80
-
-
Supply, installation, testing and balancing of Power coated extruded aluminium, fresh air inlet/Exhaust louvers with bird & insects mesh and manual volume damper(wherever required) as per specifications and approved shop drawings. The louver structure should be wather prrof type with inclination of blades to avoid rainwater leakage. Frame should be with 3.0 mm thick aluminium & blades with 1.2mm thick Al. Louver should be with required RAL colour code & AMCA certified as per publication 511.
1
-
-
Supply, and fixing of Acoustic insulation with 15mm thick open cell nitrile rubber with Micro-bial coating - Class 0 fixed with manufactures recommended Adhesives (Density 160 Kg/m3)..
5
-
-
Supplying and fixing of following thickness closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying Manufacturers recommended adhesive & Factory fitted glass cloth for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Adhesives shall be used as per manufacturers recommendation. 19 mm thick (with AL Cladding for SA)
25
-
-
Supply, installation and adjusting of disc valves suitable for exhausting toilet foul air ,comprising of an adjustable centre cone and coupling sleeve made of Aluminium sheet duly epoxy painted with approved colour. The disc valve shall be fitted with a galvanised steel installation frame and the sleeve shall incorporate a foam-rubber gasket for airtight sealing. The centre cone should be adjustable for balancing and with a locking arrangement to maintain the desired flow rate. 150mm Dia
70
-
-
Supply, installation , testing and commissioning Powder Coated Extruded Aluminium Air transfer door grilles both side flange with rear side frame as per approved shop drawings.
0.7
-
-
Supply, Installation, Testing & Commissioning of DX Inverter concealed Ductable Units complete with scroll based type compressors & R407C/R410A refrigerant gas, cooling mode, low noise condenser fans, GI coated condenser stands, microprocessor panel with sequential starting of condensing unit, coils, expansion valves, Cu cabling, single phase preventor, all vibration isolators, Cowl Piece with Flexible Connection, fire rated canvas for IDU safeties etc.
ODU to have specially factory coated treatment for heat & rust corrosion for panels, motor, electricals & heat exchanger etc. Air on condenser 45 Deg C .
MCB/Control Panel with wiring suited as per site condition & MS Stand for ODUs & Other accessories like Antivibration Pads, Expansion Kit , Wired remote , Sight Glass, Shut off valve shall be included. Following to be consisered in unit cost. 1. Power & Communication cabling from nearest power socket
2. Suitable Capacity RCBO,
3. Corded Remote 4. ODU MS Stand
5. Interconnected control cabelling 6. Pressurization , vaccumizing , Gas charging & commissioning.8.0 TR / 3200CFM High Static
1
-
-
Supply, installation, testing and commissioning of refrigerant liquid & gas pair piping using eddy current tested Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops, Refnets etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 19 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labour, consumables, refrigerant top up, oil top up and incidental expenses also forms a part of the scope covered under this item. Final Sizes as per OEM approved system selection , schematic& approved drawing For Split , DX Concealed units & condensing units
20
-
-
Supply, installation, testing and commissioning of ceiling /Floor mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be high efficient(IE -3 or EQUIVALENT) with fire rated (class H) suitable for with standing 250 °C temperature rated for 2 hours.Exhaust fan shall be connected using circuit integrity cable. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Fans shall be BMS compatible(Optionale). Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for min 250 °C for 2 hours. Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for No. fan sourced from that particular factory. The noise level of axial fan shall be less than80dBat adistance of3.0 mtfromthefan. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item.
The fan shall be low RPM (less than or equal to 1450 RPM) and capacities shall be as follows : Air Quantity : 2000 CFM ESP 20mm - Ex air electrical room
1
-
-
Supply, installation, testing and commissioning of ceiling /Floor mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be high efficient(IE -3 or EQUIVALENT) with fire rated (class H) suitable for with standing 250 °C temperature rated for 2 hours.Exhaust fan shall be connected using circuit integrity cable. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Fans shall be BMS compatible(Optionale). Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for min 250 °C for 2 hours. Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for No. fan sourced from that particular factory. The noise level of axial fan shall be less than80dBat adistance of3.0 mtfromthefan. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item.
The fan shall be low RPM (less than or equal to 1450 RPM) and capacities shall be as follows : Air Quantity : 2000 CFM ESP 20mm - Ex air electrical room Air Quantity : 5500 CFM ESP 30mm - STP Exhaust Air
1
-
-
Supply, installation, testing and commissioning of ceiling /Floor mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be high efficient(IE -3 or EQUIVALENT) with fire rated (class H) suitable for with standing 250 °C temperature rated for 2 hours.Exhaust fan shall be connected using circuit integrity cable. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Fans shall be BMS compatible(Optionale). Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for min 250 °C for 2 hours. Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for No. fan sourced from that particular factory. The noise level of axial fan shall be less than80dBat adistance of3.0 mtfromthefan. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item.
The fan shall be low RPM (less than or equal to 1450 RPM) and capacities shall be as follows : Air Quantity : 2000 CFM ESP 20mm - Ex air electrical room Air Quantity : 4400 CFM ESP 30mm - STP Fresh Air
1
-
-
Supply, installation, testing and commissioning of ceiling /Floor mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be high efficient(IE -3 or EQUIVALENT) with fire rated (class H) suitable for with standing 250 °C temperature rated for 2 hours.Exhaust fan shall be connected using circuit integrity cable. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Fans shall be BMS compatible(Optionale). Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for min 250 °C for 2 hours. Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for No. fan sourced from that particular factory. The noise level of axial fan shall be less than80dBat adistance of3.0 mtfromthefan. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item.
The fan shall be low RPM (less than or equal to 1450 RPM) and capacities shall be as follows : Air Quantity : 2000 CFM ESP 20mm - Ex air electrical roomAir Quantity : 3500 CFM ESP 30mm - Pump room Exhaust Air
1
-
-
Supply, installation, testing and commissioning of ceiling /Floor mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be high efficient(IE -3 or EQUIVALENT) with fire rated (class H) suitable for with standing 250 °C temperature rated for 2 hours.Exhaust fan shall be connected using circuit integrity cable. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Fans shall be BMS compatible(Optionale). Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for min 250 °C for 2 hours. Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for No. fan sourced from that particular factory. The noise level of axial fan shall be less than80dBat adistance of3.0 mtfromthefan. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item.
The fan shall be low RPM (less than or equal to 1450 RPM) and capacities shall be as follows : Air Quantity : 2000 CFM ESP 20mm - Ex air electrical room Air Quantity : 2900 CFM ESP 30mm - Pump room Fresh Air
1
-
-
Supplying and erecting ISI mark GI pipe 75/80 mm dia ‘C” class
position with accessories complete. Specification no. CW-PLB/GP.
10
-
-
Supplying and erecting ISI mark GI pipe 100 mm dia ‘C” class
position with accessories complete. Specification no. CW-PLB/GP.
30
-
-
Supplying and erecting cast iron double flange NRV of size 100 mm
dia complete as per specification no. FF-VL/NRV
1
-
-
Supplying and erecting gun metal single outlet hydrant valve
fitted with necessary accessories complete as per specification no.
FF-VL/HV
1
-
-
Supplying and installing wall mounting swinging Hose reel drum
fitted with 19 mm dia. 30m long high pressure polypropylene
(Polyhose) fitted with necessary accessories complete as per
specification no. FF-FFA/HV
1
-
-
Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe,
63mm dia, 15m in length, fitted with necessary accessories
complete as per specification no. FF-FFA/RRL
1
-
-
Supplying & erecting gun metal branch pipe of 63 mm dia fitted
with 20 mm dia detachable hexagonal nozzle complete as per
specification no. FF-FFA/NZ
1
-
-
Supplying and erecting 20/25mm dia gun metal air release cock,with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
1
-
-
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG
1
-
-
Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per
specification no. FF-FFA/PS
1
-
-
Supplying and erecting one no. brass orifice plate having 6 mm.
thickness, 140 mm outer dia and required/proper diameter of
inner hole at every single outlet hydrant valve as per specification no.
FF-FFA/OP
1
-
-
Providing Round bottom fire bucket of 9 Litres capacity as per IS :
2546 made out of 24 gauge G.I. sheet with extra handle at bottom
duly painted white inside and red outside with FIRE Mark, on
provided stand/ wall hook complete
1
-
-
Supplying and erecting ABC powder type fire extinguisher as per
IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection
on wall..
10
-
-
Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas
cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S.
flat with nuts & bolts grouted in wall complete.
4
-
-
Cables : Supply & laying " XLPE cables" on walls or through existing trenches etc. (SP-ME-TS- 6)
LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser.
1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables 4C x 6.0 Sq.mm
10
-
-
Cables : Supply & laying " XLPE cables" on walls or through existing trenches etc. (SP-ME-TS- 6)
LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser.
1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables 2C x 2.5 Sq.mm
10
-
-
Cable End Termination For Aluminium Cables : (SP-ME-TS-6)
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of aluminium lugs for aluminium cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories 2C x 2.5/4 Sq.mm
2
-
-
Cable End Termination For Aluminium Cables : (SP-ME-TS-6)
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of aluminium lugs for aluminium cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories 4C x 6.0 Sq.mm
2
-
-
Supplying, installing, testing and commissioning of G.I. " C" Class Pipes confirming to IS 1239 Heavy grade upto 150 mm Dia and IS 3589 for size above 150 mm Dia with Screwed / welded fittings such as elbows, flanges, tees, reducers etc laid below ground according to technical specifications and drawings. Rates shall be inclusive of Escavation ( minimum 1 meter deep ) and Refilling of soil, anticorrosive treatment with 4 mm thick polymer corrosion resistant tape as per IS 10221, overlap shall be 15mm minimum. (150mm Dia)
50
-
-
Supply & Fixing Polyethylene water storage tank with cover and suitable locking
arrangement.
20000
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A -- with Cat A Modular Accessories
100
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories
2
-
-
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
10
-
-
Wiring for 5A /15A power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) alongwith 2 Nos of 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
60
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface steel conduit( medium) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
250
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface steel conduit( medium) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
50
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface steel conduit( medium) as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire
30
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface steel conduit( medium) as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire
20
-
-
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit ( medium)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A -- with Cat A Modular Accessories
30
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) with Cat A Modular accessories
3
-
-
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
75
-
-
Wiring for 5A /15A power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 2 Nos of 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
80
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
225
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface rigid PVC conduit( medium)/ casing caping, as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire.
50
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 A modular socket outlet and 4 nos 5/ 6 A modular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively. ( For workstations) (a) Cat A
25
-
-
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A
13
-
-
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 2 no 6 pin 15/16 A modular socket outlet and 2 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A
13
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 no 6 pin 15/16 A modular socket outlet and 2 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A
5
-
-
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing required number of modular switches , connection painting etc. as required. ( For group controlled points) (a) Cat A
5
-
-
Installation, earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FR PVC insulated copper conductor single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
5
-
-
Carriage of ceiling fan and regulator/ exhaust fan from store to site as required.
3
-
-
Installation, earthing, testing and commissioning of exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required
2
-
-
Installation, earthing, testing and commissioning of exhaust fan upto 510 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required
1
-
-
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (c) 12 way with 100A MCCB as Incomer, double door, Cat A
1
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A
72
-
-
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
2
-
-
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A
2
-
-
Supplying and fixing SP blanking plate in the existing MCB DB complete as required
5
-
-
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A
3
-
-
Providing and fixing M.V. Danger Notice plate of 200mm x 150 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required
5
-
-
Providing and fixing HT Danger Notice plate of 250mm x 200 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required
5
-
-
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata
2
-
-
Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.
3
-
-
Constructing a special masonry inspection chamber for earthing system as per the enclosed drawing and specifications. The square chamber( 860 x860mm) shall be constructed with brick masonry of 230 mm on a solid base of 75mm rubble packing and 75mm PCC. The floor level shall be finished with 50mm cement concrete. The inside wall of the chamber shall be plastered with 12mm plaster finish. A removable CI/RCC cover of size 400x 400mm on a angle box frame of 35x35x5mm shall be provided with locking arrangements/ lifting lugs. The scope of work includes all material labour etc complete as required.
2
-
-
Supplying and drawing/fixing jelly filled unarmoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (a) 5 Pair
50
-
-
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (d) 50 Pair
25
-
-
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (e) 100 Pair
100
-
-
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (a) 10 Pair
3
-
-
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (c) 50 Pair
1
-
-
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (d) 100 Pair
1
-
-
Supplying, erecting and commissioning of Discoonection type Krone Module, ITD.DOT approved, having capacity of 10 pairs with silver plated terminal contacts, complete as required.
3
-
-
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6
30
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
5
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
5
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
5
-
-
Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm
30
-
-
Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm
150
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm
55
-
-
4 Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. core 10 sq.mm
35
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.
15
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 4 x 1.5/2.5 Sq. mm.
18
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 4 x 4 Sq. mm.
10
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.
12
-
-
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (a) 100mm width x 50mm depth
100
-
-
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.(b) 150mm width x 50mm depth
100
-
-
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (c) 200mm width x 50mm depth
50
-
-
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (d) 300mm width x 50mm depth
75
-
-
Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
35
-
-
Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
20
-
-
Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f.
0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips plete with 3 years warranty.
20
-
-
Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.
4
-
-
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f. 0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 ears warranty
5
-
-
Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.
6
-
-
Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of minimum 25000 hrs. with verheating protection with 2 years warranty.
20
-
-
Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable. 125A FP MCCB ,25 kA breaking capacity
1
-
-
Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable. 63A FP MCB+RCCB 300mA
4
-
-
Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable. 40A FP MCB 10kA
1
-
-
Supply, Installation Testing and Commissioning of IP 20 Rated, 3D Printed Pendant Luminaire suitable for E27 lamp. The Housing material of the shade should be recyclable 100% Virgin Polycarbonate. The pendant shade should be available with choice of essential colors, primary colors and shiny metallic colors with a possibility of printing Logo through 3D printing process. The pendant shade should have flexibility of having textures to provide a improved aesthetic appeal. In terms of design , Luminaire should have a modular assembly and the shade should be replaceable without tooling and while being able to re-use all other luminaire parts. The Pendant shade should be within size limit of 250 mm x 250 mm and should be tested in conformity with the essential requirements of the European Directives and harmonized standards: EN 60598-1: 2015 and EN 50581:2012. Similar to Philips 3D printed luminaire
4
-
-
Supply of LED exit signage of Box size in mm 325 x 425 x 365
10
-
-
Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC
2
-
-
Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.
40
-
-
Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.
40
-
-
Supply, installation, testing and commissioning cordless remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete.
2
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
50
-
-
Supply, Installation Testing & Commissioning of Dual Tone Metal Grill Ceiling Mounted Speaker with all recquisite mouting accessories to mount the speaker on False Ceiling / True Ceiling. Brands: Bosch/Ateis/Honeywell a) 6 Watts with Tapping of 6/3/1.5W
12
-
-
Supply Installation, Testing and comissioning of 6 Zone Main PA Console Expandable upto 12 zones, Complete with suitable rack arrangement to house the entire PA system components. The system shall be equipped with relaying inbuilt automated messages in case of an emergency.
Note:- Vendor to calculate Rack size based on the no amplifiers, message manager and controller with call station etc. Brands: Bosch/Ateis/Honeywell
1
-
-
Supply Installation, Testing and comissioning of Booster (Audio) Amplifiers sutaible to accommodate all above speakers, and Shall be connected to Main PA console Brands: Bosch/Ateis/Honeywell (a) 250 Watt
1
-
-
Supply, installation, Testing and Commissioning of Call Station With 6 Zone Selection Switch and microphone and accessories required to achive desired functionality. Complete with required accessories and cables Brands: Bosch/Ateis/Honeywell
1
-
-
Supply, Installation Testing & Commissioning of Volume Control, Shall capable to override incase of fire Emergency. Brands: Bosch/Ateis/Honeywell
1
-
-
Supply installation of 2 Core x 1.5 mm2, Multistranded AT Copper, FRLS Armoured cable, BLUE in Colour.
The cable shall be laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable compression glands, cable tags and Ferruling. Brands: Sony/Samsung/Bosch
80
-
-
Supplying and erecting ISI mark GI pipe 75/80 mm dia ‘C” class
position with accessories complete. Specification no. CW-PLB/GP.
10
-
-
Supplying and erecting ISI mark GI pipe 100 mm dia ‘C” class
position with accessories complete. Specification no. CW-PLB/GP.
10
-
-
Supplying & erecting cast iron double flange butterfly valve of size
100 mm dia. complete as per specification no. FF-VL/BFV
4
-
-
Supplying and erecting cast iron double flange NRV of size 100 mm
dia complete as per specification no. FF-VL/NRV
2
-
-
Supplying and erecting gun metal single outlet hydrant valve
fitted with necessary accessories complete as per specification no.
FF-VL/HV
2
-
-
Supplying and installing wall mounting swinging Hose reel drum
fitted with 19 mm dia. 30m long high pressure polypropylene
(Polyhose) fitted with necessary accessories complete as per
specification no. FF-FFA/HV
2
-
-
Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe,
63mm dia, 15m in length, fitted with necessary accessories
complete as per specification no. FF-FFA/RRL
2
-
-
Supplying & erecting gun metal branch pipe of 63 mm dia fitted
with 20 mm dia detachable hexagonal nozzle complete as per
specification no. FF-FFA/NZ
2
-
-
Supplying and erecting 20/25mm dia gun metal air release cock,with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
2
-
-
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG
2
-
-
Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per
specification no. FF-FFA/PS
2
-
-
Supplying and erecting one no. brass orifice plate having 6 mm.
thickness, 140 mm outer dia and required/proper diameter of
inner hole at every single outlet hydrant valve as per specification no.
FF-FFA/OP
2
-
-
Providing and fixing ball valve (brass) of
approved quality : (a) High pressure with P.V.C. floats: 3) 25mm nominal bore
2
-
-
Providing Round bottom fire bucket of 9 Litres capacity as per IS :
2546 made out of 24 gauge G.I. sheet with extra handle at bottom
duly painted white inside and red outside with FIRE Mark, on
provided stand/ wall hook complete
1
-
-
Supplying and erecting ABC powder type fire extinguisher as per
IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection
on wall..
4
-
-
Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S.
flat with nuts & bolts grouted in wall complete.
4
-
-
Supplying, installing, testing & commissioning of electrical motor driven, Positive Suction type Booster Pump, Monoblock type of capacity 900 LPM at 35 Mtrs. The pump shall be coupled to Squirrel Cage Induction TEFC motor of suitable HP with speed of 2900 RPM. Complete set shall be mounted on common base frame. The rate shall be inclusive of foundation bolts,Vibration Isolators and all other necessary accessories, complete in all respects.
1
-
-
Supply, Erection of emergency Start / Stop Push Button station weather proof type for Booster pump at terrace level. ( Also Panel should be compatible for BMS Connectivity like Level switch to be provided for fire ug, All Pumps On / Off Command, On / Off Status, Trip Status to be Monitor on BMS and for the same Potential free Contacts to be privided in starter Panel.) NOTE 2 sets of push buttons to be provided one in BMS /FA room and other in security room near main gate.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements