Goa State Urban Development Agency Tender
View complete overview of Goa GSUDA Tender
Costs
EMD
₹ 5,94,610Document Cost
₹ 6,000Tender Fee
₹ 4,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_GSUDA_4712_1Bid Award Id
ViewTender No
F.40/GSUDA/E-TENDER/47/712Tender Authority
Goa State Urban Development Agency ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Refilling the pipeline/foundation trenches, plinth sides, foundation, etc.with available excavated earth in layers not exceeding 20cm in depth consolidating each layer by ramming and watering lead upto 50m and all lifts and disposal of surplus earth as directed.
2513
-
-
... More
Supplying and filling in plinth under floors, trenches including watering, ramming, consolidating and dressing complete with moorum
8
-
-
... More
Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling each layer with half ton roller or wooden or steel hammers and rolling every third and topmost layer with power toller of minimum 8 tonne and dressing up in embankment for roads, flood banks, marginal and guide banks and filling up of ground dressing etc. complete.
481
-
-
... More
Supplying and filling approved earth / hard soil obtained from contractor's identified source inclusive of obtaining all requisites statuatory approvals & observing all the security measures, with all lead and lifts, transporting to site, spreading, grading the earth/hard soil in layers not exceeding 250 mm loose layers, breaking clods & compacting including watering each layer to bring it upto to optimum moisture content followed by rolling with 8-10 MT roller and every third as well as topmost layer by mechanical vibratory roller to attain dry field density not less than 95% of maximum dry density (Procter Test). (Refer detailed specifications enclosed. The cost of the tests, determination of settlement of natural ground by approved method and cost towards obtaining statutory approvals for cutting/borrowing the earth shall be borne by the contractor)
25
-
-
... More
Disposal of surplus earth & debris upto all leads and lifts including loading, unloading and stacking, The site should be identified by the contractor and obtain all statuatory approval.
16
-
-
... More
Providing & Constructing Half brick masonry using fly ash bricks in cement mortar 1:3 (1 cement: 3 coarse sand) with bricks of class designation 40 kgs / cm2. above plinth upto floor V level 200x95x95 / 230x110x80
23
-
-
... More
Providing & laying rubble packing with hard laterite stone under floors including watering ramming and consolidating etc.in pipeline trenches and other foundations complete.
481
-
-
... More
Providing & constructing laterite masonary in neatly dressed stones of size as specified in Cement mortar 1:5 (1cement : 5coarse sand) in foundation and basement.
143
-
-
... More
Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)
48
-
-
... More
Providing & constructing laterite masonary in neatly dressed stones for 23 cms masonary walls in cm. 1:5 (1 cement : 5 coarse sand) in foundation upto plinth level
142
-
-
... More
Providing & constructing laterite masonary in neatly dressed stones for 23 cms masonary walls in cm. 1:5 (1 cement : 5 coarse sand) in all sizes in super structure from floor I upto floor V level
14
-
-
... More
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in - all works upto plinth level
364
-
-
... More
Providing and laying upto floor V level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. - a) Kerbs, Steps and the like at or near ground level
3
-
-
... More
b) String Courses, copings, bed plates, anchor blocks, plain window sills and the like
16
-
-
... More
c) Small lintels not exceeding 1.5 m clear span including coping and the like requiring formwork to the suspended portions
1
-
-
... More
Providing and laying in position (1:1½:3) reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. (1 cement:1½ coarse sand:3 graded stone agg 20mm nominal size) a) All works upto plinth level
63
-
-
... More
b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
15
-
-
... More
c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
19
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for a) foundation, footings, bases of columns etc.
449
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for b) Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
1307
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for c) Columns, Piers, Pillars, Abutments, Posts and struts (square, rectangle polygon in plan) at all levels
126
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for d) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth at all levels
19
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for e) suspended floors, roofs, landings, shelves and their supports, balconies and chajjas at all levels
116
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of forms for f) Vertical or horizontal fins individually or forming box, louvers or projected bands at all levels
35
-
-
... More
Providing TMT steel reinforcement bars of SAIL, TATA. VIZAG, JSW make only (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
12340
-
-
... More
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. - Size 60 cm L x45 cm H x 15 cm T
355
-
-
... More
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. - a) Size 900 x 400 x150 mm with steel reinforcement not less than 7.0 kg per unit - 30T Capacity
38
-
-
... More
b) Size 750 x 400 x100 mm with steel reinforcement not less than 4.2 kg per unit
980
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8
-
-
... More
Providing and fixing second class Indian Teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc. - 50 x 12 mm
25
-
-
... More
Providing and fixing SS 304 Aldrop/ sliding door bolts with bolts, nuts and screws etc complete - 250 x 16 mm
2
-
-
... More
Providing and fixing SS 304 Tower bolts (Barrel type) with necessary screws etc complete - 100x10 mm
4
-
-
... More
Providing and fixing bright finished SS 304 handles with necessary screws etc complete - 125mm
4
-
-
... More
Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete
2
-
-
... More
Providing and fixing 150 mm. SS 304 floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
2
-
-
... More
Providing and fixing C. P. Brass/brass hydraulic door closer of approved make with necessary screws and fittings complete.
2
-
-
... More
Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation
2
-
-
... More
Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
2
-
-
... More
Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete
12
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
21380
-
-
... More
Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. - In Tees, angles, flats and channels
312
-
-
... More
Providing and fixing Anodized Aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer : adjustable louvred windows (louvre blades of thickness 1.20mm) with figured glass including powder coating with pure polyester of required shade and colour. All work between civil work and aluminium frames shall be sealed and made watertight by applying silicone sealant Rectangular tube @0.478kg/m 50.8x25.4x1.20 U Channel top & bottom @0.073kg/m 9.52x9.52x1.10 4 mm thk figured glass, EPDM gaskets complete with accessories for locking, handles, stopppers etc.
3
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1805
-
-
... More
Extra for powder coating with pure polyester powder (60-80 microns) of shade of required colour on the aluminium/MS/ SS section (paid separately)
155
-
-
... More
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. a) Plain grill
1586.79
-
-
... More
Proving & laying 25mm Cement concrete flooring 1:2:4 (1cement :2coarse sand:4 graded stone aggregate 12.5mm nominal size) finished with a floating coat of neat cement
25
-
-
... More
Providing and laying crazy paving (as per design shown in the drawing or as directed by the engineer-in-charge) with approved quality shahabad tile 20 mm thickness (unpolished) of specified sizes laid on 20 mm thick (average) bed of cement mortar 1:5 (1 cement : 5 coarse sand) as directed completed.
147
-
-
... More
Proving & laying Kotah stone slab over 25 mm thick in risers of steps, skirtings, dado & pillars laid on12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
8
-
-
... More
Providing and laying jet black mirror polish granite in urinal partitions with cement Complete. 20mm one side polished should be joined together with two component epoxy adhesive to make 20+20mm = 40mm thk partition
1
-
-
... More
Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet black with mirror polish) 20 mm thick
1
-
-
... More
Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.
128
-
-
... More
Rounding of edges of marble/ Granite / Kotah slab to semi circular slope
405
-
-
... More
Providing & laying 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados jointing with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness, including pointing in white cement mixed with pigment of matching shade complete. - Wall Ceramic Glazed Tiles : 300 x 600 (Quality of tile to be conforming to the price range between Rs. 550-600 per sq. mt)
187
-
-
... More
Providing & laying hand painted Azulejos Glazed wall tiles one colour or multicolour design of 150x150mm size as approved by Engineer-in-charge in skirting, risers of steps and dados jointing with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness, including pointing in white cement mixed with pigment of matching shade complete.
500
-
-
... More
Providing and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete - Light Shades (Quality of tile to be conforming to the price range between Rs. 313-350 per sq. mt)
26
-
-
... More
Providing and laying vitrified industrial floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete - 300 x 300 mm Light Shades - 10 mm thick (Quality of tile to be conforming to the price range between Rs. 500-525 per sq. mt)
130
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.60 mm thick in all colours except grey
829
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. a Elite Brown
44
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm - Jet Black (Quality of stone to be conforming to the price range between Rs.1991-2000 per sq. mt)
62
-
-
... More
Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
56
-
-
... More
Providing water proofing treatment over the new RCC roofs, terrace, sunken slabs, chajjas by spreading cement slurry over the RCC slab and laying of 100 mm average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba should be covered with damp proof jointless water proofing plaster of mix 1:3 (1 cement : 3 Fine sand), finish smooth with wooden trowel with false marking of 30cm squares. the Vertical surfaces of the adjoining walls are to be treated upto a height of 30cms including rounding of junctions (The rate includes for complete items including labour and materials and including the cost of initial treatment of roof slab as follows. The injection of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb cracks etc. in the RCC slabs) Note: The cement consumption 25 kg /sq.m.
29
-
-
... More
An elastomeric, cementitious, waterproof coating for concrete and masonry. Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.
60
-
-
... More
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
23
-
-
... More
12mm cement plaster 1:4 (1cement: 4 fine sand)
1375
-
-
... More
6mm cement plaster to ceiling 1:3 (1 cement : 3 fine sand)
6
-
-
... More
neat cement punning
210
-
-
... More
Extra for providing and mixing water proofing material proportion recommended by the manufacturers. b) 12mm cement plaster 1:4 (1 cement : 4 sand)
1375
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge including providing and mixing water proofing material proportion recommended by the manufacturers at all height from ground level
63
-
-
... More
12mm thick molded cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) cm per meter
3429
-
-
... More
Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.
1
-
-
... More
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
1026
-
-
... More
Painting two or more coats (excluding priming coat ) with superior quality ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give a even shade
1584
-
-
... More
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade.
1
-
-
... More
Painting(two or more coats) with synthetic enamel paint of approved brand and manufacture in all shades on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture
266
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade (including min two priming coats and two layers of putty alternatively)
23
-
-
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete, At all heights from ground level
1075
-
-
... More
Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer. (The rate is inclusive of all materials & labours).
25
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
604
-
-
... More
Supply at site of work well decayed farmyard manure, from any available source approved by the engineer-in charge including screening and stacking as per MORTH Specification 308.2
41
-
-
... More
Supply at site of work/store-deoiled neem cake duly packed in used gunny bags as per MORTH Specification 308.2
182
-
-
... More
Supplying of sludge duly stacked at site/store as per MORTH Specification 308.2
35
-
-
... More
Supplying and stacking of local river sand including mixing with soil/ earth
128
-
-
... More
Rough dressing the trenched ground including breaking clods.
1458
-
-
... More
Fine dressing the trenched ground.
1458
-
-
... More
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure excluded).
362
-
-
... More
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
444
-
-
... More
Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. a) Sampurna - 19:19:19
350
-
-
... More
Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. b) Urea
350
-
-
... More
Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. c) MOP - Murrete of Pottash
250
-
-
... More
Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. d) Micronuitrient +mix -
200
-
-
... More
Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. a) chloropyrifos - 20% EC
16
-
-
... More
Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. b) Monocrotophos- 50%
16
-
-
... More
Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. c) Sevin Powder
15
-
-
... More
Establishment of as per specifications MANURE based VERMI COMPOST - WITH PULVERISATION as instrucetd by consultants with regular sequence of works on site along with stome masonary edge on the perimeter size 4 mts x3 mts x 1 to 2 mts average as specifed in design.
1
-
-
... More
Treatment of lawn areas with insectisides, pesticides by application of Lindane (Zuari Agro Industries) as per specification or direction of the engineer incharge a) Lindane
50
-
-
... More
Treatment of lawn areas with insectisides, pesticides by application of dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification as per specification or direction of the engineer incharge b) Dithane -m-45
40
-
-
... More
Treatment of lawn areas with insectisides, pesticides by application of anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge c) Chloropyriforos dust
5
-
-
... More
Making lawns Using Mexican Ready Lawn , 1 x 2 feet size panels each including finishing the base, breaking of clods, removal of rubbish, dressing, planting lawn at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm. Including Maintenance of lawns for a period of one year including watering etc. complete
998
-
-
... More
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metre and supplying and planting hedge plants at 30 cm apart as per MORT & H Specification 307 including maintenance of hedge for one year including watering etc.
128
-
-
... More
Planting of trees by the roadside (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground mixing the soil with decayed farmyard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year as per MORTH Specification 307
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES a) Brassaiya sps - average heights 5 feet tall
11
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES b) Buffer tree - average heights 5 feet tall
25
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES c) Bauhinia Purpurea - average heights range 5 feet tall
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES d) Cassia Siamia- average heights range 5 feet tall
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES e) Plumeria Alba- average heights range 10 feet tall
5
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES f) Michelia Champaca- average heights range 5 feet tall
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES g) Mimusops elengi - average heights range 5 feet tall
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES h) Plumeria Rubra- average heights range 10 feet tall
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. TREES j) Roystonea Regia-average heights range 10 feet tall(size mentioned-only trunk size and not including leaf)
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. SHRUBS a) Bougainvillea sps variegated- Jamaica (red, orange)
50
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. SHRUBS b) Heliconia metallica
100
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. SHRUBS c) Hibiscus Rosa Sienesis ( China Rose)
25
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS, FERNS a) Bismarkia Nobilis
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS, FERNS b) Brahea Armata
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS, FERNS c) Ficus sps
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS, FERNS d) fish tail palm
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS, FERNS e) lady palm
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. PALMS, CYCAS,FERNS f) macarthur palm
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. FRUIT GARDEN a) Custard Apple - 4 feet tall
5
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. FRUIT GARDEN b) Psidium Guava, Guava - 4 feet tall
5
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. FRUIT GARDEN c) Jaam (Red) - 4 feet tall
5
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. FRUIT GARDEN d) Jaam (White) - 4 feet tall
5
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. FRUIT GARDEN e) Musa Sapientum (Banana) - 4 feet tall
10
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. SPECIMEN PLANT a) Nidularium Tricolour
25
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. SPECIMEN PLANT b) Pisonia Alba
25
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. BAMBOOS a) Arundinaria Muriellaelae
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. BAMBOOS b) Arundo Donax Var Versiocolor
50
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. HERB GARDEN SPECIES a) Jasminum Grandiflorum (Mogra)
30
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. HERB GARDEN SPECIES b) Lawsonia Inermis (Mehndi)
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. HERB GARDEN SPECIES c) Musa Para Disiaca (Kela)
20
-
-
... More
Supply and plantation of following types of healthy, decorative, flowering plants, trees , hedges, land covers etc. Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantation. HERB GARDEN SPECIES d) Ocimun Sanctum (Tulasi)
20
-
-
... More
Supply and Laying of 40mm nominal or down granitic/ basaltic aggregates under floors including watering ramming and consolidating etc. complete.
110
-
-
... More
Supply and Laying of 20mm nominal or down granitic/ basaltic aggregates under floors including watering ramming and consolidating etc. complete.
155
-
-
... More
Supply and Laying of 10mm nominal or down granitic/ basaltic aggregates under floors including watering ramming and consolidating etc. complete.
55
-
-
... More
Supply and Laying of Sand (River/ Manufactured) Course/ Fine under floors including watering ramming and consolidating etc. complete. 80% rounded Washed silica sand (particle size 0.2 to 1.0mm)
52
-
-
... More
Supply and Laying of River Pebbles in floors including washing, ramming and consolidating etc. complete.
15
-
-
... More
SUB-BASES, BASES ( NON- BITUMINOUS) AND SHOULDERS Granular Sub-base with Close Graded Material (Table:- 400-1) By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
78
-
-
... More
Providing. Laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH Specification 406
52
-
-
... More
Providing and laying bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder to the specified percentage of total mix , transported to site, with all leads laid over a previously prepared surface with Mechanical paved finisher to the required grade, level and alignment and rolled with smoth wheeled roller and vibratory roller to achieve the desired compaction,using antistripping agent complete as per MoRT&H Specifications Clause 504 Grade-II (19mm nominal size)@ 4% of Bitumen-mix a) Antistripping agent @ 0.5% of bitumen content
26
-
-
... More
Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a Mechanical paver finisher to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509 Grade-II (13mm nominal size) @ 6.5% Bitumen of grade 60/70 a) Antistripping agent @ 0.5% of bitumen content
13
-
-
... More
Providing and applying primer coat with bitumen or bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per MoRT&H specifications clause 502. a) Bitumen emulsion@ 0.60 kg/sq.m.
519
-
-
... More
Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503., - Bitumen emulsion @ 0.375 kg/sq.m.
1037
-
-
... More
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints, etc. complete.- A) 100 mm dia RCC pipe
25
-
-
... More
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints, etc. complete.- B) 250 mm dia RCC pipe
25
-
-
... More
Providing, laying and fixing non-pressure NP2 class RCC pipes with collar joints conforming to IS 458: 2003 revised as per amendment no 11 including rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, curing of cement mortar etc. complete. - 300 mm dia RCC pipe
75
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 10 KG/ SQ. CM - Outer dia 63 mm
300
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 10 KG/ SQ. CM - Outer dia 110 mm
368
-
-
... More
Supplying and Fixing in position at site of work including railway freight, carting, loading, unloading, stacking etc. PVC ball valves in PN 16 rating with one end compression using Blue colour compression nut in polypropylene material 7 other end with female threads confirming to ISO:4422-4. a) (Diameter - main pipe outer diameter in mm) 63x 2" (tapping size in inches)
17
-
-
... More
Fixing water meter and stop cock in G.I. Pipe line including cutting and threading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately).
1
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 6 KG/ SQ. CM a) Outer dia 63 mm
8
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 6 KG/ SQ. CM b) Outer dia 75 mm
2
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 6 KG/ SQ. CM c) Outer dia 110 mm
13
-
-
... More
Providing and fixing Rigid PVC (SELFIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc, conforming to ASTM 2467 with ISO 14001, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer.conforming to IS 4985-2000 and bearing ISI mark, CLASS 6 KG/ SQ. CM d) Outer dia 140 mm
29
-
-
... More
Proving and fixing white vitreous china extended Wall Hung type (European Type) water closet of approved shape with seat and lid with C.I. brass hinges and rubber fittings with white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
2
-
-
... More
Providing and fixing vitreous china under counter wash basin with RS or C.I. brackets painted white, NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993, C.P. brass chain with rubber plug, 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. Or C.P. brass trap and union complete, including cutting and making good the walls where required. - wash basin 550x400/Oval 560x410mm/ round 550x450mm including cutting in base etc complete with sealing
2
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
1
-
-
... More
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. - 1000 lit. Capacity
1
-
-
... More
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete
1
-
-
... More
Providing & fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. Brass Screws - 600x20mm size
2
-
-
... More
Providing and fixing toilet paper holder - C.P. brass
2
-
-
... More
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
2
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality : - 20mm nominal bore
4
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality : - 25mm nominal bore
3
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality : - 32mm nominal bore
1
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality : - 40mm nominal bore
1
-
-
... More
Providing and fixing brass stop cock (heavy) of approved quality : - 50mm nominal bore
2
-
-
... More
Providing and fixing brass full way valve (heavy duty) with wheel of approved quality - 20mm nominal bore
2
-
-
... More
Providing and fixing brass full way valve (heavy duty) with wheel of approved quality - 25mm nominal bore
1
-
-
... More
Providing and fixing brass full way valve (heavy duty) with wheel of approved quality - 40mm nominal bore
1
-
-
... More
Providing and fixing brass full way valve (heavy duty) with wheel of approved quality - 50mm nominal bore
1
-
-
... More
Providing and fixing ball valve (brass) of approved quality High or Low pressure with Plastic floats - 20mm nominal bore
1
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design - 150 x 100 mm size – P or S type
2
-
-
... More
Constructing brick masonry manholes or inspection chamber with second class bricks in cement mortar 1:5 (1 Cement : 5 Fine Sand), RCC top slab 1:1.5:3 mix (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) Foundation concrete 1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 Cement : 3 Coarse Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1 Cement :2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) neatly finished complete as per standard design. a) Inside size 90x80 cm and 60 cm deep including Supplying and fixing at the site of work of Steel Fibre Reinforced Concrete (SFRC) manhole covers with frames made as per IS :12592 (part I and II) - 1991 in concrete M45grade. The covers and lapped in 2mm thick. steel plate and this plate & lifting hooks are duly painted in corrosion resistant epoxy paint etc. complete. Light Duty (2.50 Metric Tonne Capacity) a) 450x900
2
-
-
... More
Constructing brick masonry manholes or inspection chamber with second class bricks in cement mortar 1:5 (1 Cement : 5 Fine Sand), RCC top slab 1:1.5:3 mix (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) Foundation concrete 1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 Cement : 3 Coarse Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1 Cement :2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) neatly finished complete as per standard design. b) Inside size 60x60 cm and 60 cm deep including Supplying and fixing at the site of work of Steel Fibre Reinforced Concrete (SFRC) manhole covers with frames made as per IS :12592 (part I and II) - 1991 in concrete M45grade. The covers and lapped in 2mm thick. steel plate and this plate & lifting hooks are duly painted in corrosion resistant epoxy paint etc. complete. Light Duty (2.50 Metric Tonne Capacity) b) 450x600
2
-
-
... More
Supplying and fixing at the site of work of Steel Fibre Reinforced Concrete (SFRC) manhole covers with frames made as per IS :12592 (part I and II) - 1991 in concrete M45grade. The covers and lapped in 2mm thick. steel plate and this plate & lifting hooks are duly painted in corrosion resistant epoxy paint etc. complete. Light Duty (2.50 Metric Tonne Capacity) a) 450x600 mm
3
-
-
... More
Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design
1
-
-
... More
Providing & fixing rigid PVC SWW (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete ( single/double socketed) - 110 mm dia
4
-
-
... More
Providing & fixing rigid PVC SWW (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete ( single/double socketed) - 75 mm dia
5
-
-
... More
Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with door - 110 mm dia
2
-
-
... More
Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with door - 75 mm dia
2
-
-
... More
Providing & fixing single Tee of rigid PVC (approved make) for SWR pipes including lubricating etc. complete bend with door - 110 mm dia
2
-
-
... More
Providing & fixing single Tee of rigid PVC (approved make) for SWR pipes including lubricating etc. complete bend with door - 75 mm dia
2
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door - 110 mm dia
2
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door - 75 mm dia
2
-
-
... More
Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door - 110 mm dia
2
-
-
... More
Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door - 75 mm dia
2
-
-
... More
Providing & fixing Nahani trap of rigid PVC of (approved make) for SWR pipes including lubricating etc complete with SS door - 75mm dia
5
-
-
... More
Providing & fixing U.P.V.C. pipe clips (approved make) for S.W.R pipe - 110mm
30
-
-
... More
Providing & fixing U.P.V.C. pipe clips (approved make) for S.W.R pipe - 75mm
20
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 - 15mm nominal bore
4
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 - 15mm nominal bore
2
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy CONCEALED STOP COCK WITH SLINDING FLANCE 20MM Jaquar make or equivalent. Confirming to IS 8931;1993 - 20mm nominal bore
2
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy CONCEALED STOP COCK WITH SLINDING FLANCE 15MM Jaquar make or equivalent. Confirming to IS 8931;1993 - 15mm nominal bore
2
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
2
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
2
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. - 15 mm dia nominal outer dia pipes.
4
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. - 20 mm dia nominal outer dia pipes.
9
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. - 25 mm dia nominal outer dia pipes.
15
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. - 32 mm dia nominal outer dia pipes.
5
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40 (blue)/(white) - 25mm outer dia.
80
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40 (blue)/(white) - 32mm outer dia
50
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40 (blue)/(white) - 40mm outer dia
20
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40 (blue)/(white) - 50mm outer dia.
40
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40 (blue)/(White) - 20mm outer dia.
25
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40 (blue)/(White) - 25 mm dia nominal outer dia pipes.
25
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40 (blue)/(White) - 32 mm dia nominal outer dia pipes.
25
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40 (blue)/(White) - 40 mm dia nominal outer dia pipes.
55
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40 (blue)/(White) - 50 mm dia nominal outer dia pipes.
55
-
-
... More
Supplying & Fixing C.I. Foot valve with metal valve and seat full bore type, having total area through strainer perforations three times that of pipe size suitable for working pressure of 2 kg/sq.cm. As per IS: 4038 (lift type) (class B) - 50 mm dia
2
-
-
... More
Construction of meter box of size1.00x0.45x0.90 m in laterite stone masonry in cement mortar1:5 (1cement :5coarse sand). Foundation concrete of 8cm thick 1:4:8 (1 cement : 4 coarse sand : 8 graded granitic or basaltic stone aggregate 40mm nominal size) RCC top slab 8cm thick 1:2:4 (1Cement:2 coarse sand:4 graded granitic or basaltic stone aggregate 20mm nominal size) including high yield steel bars 8mm dia. 4 nos. each in both directions finished with 12mm thick cement plaster 1:6 (1 cement:6 coarse sand) including white washing with lime, two or more coats to give an even shade. Providing & fixing door cover of mild steel angle frame of size 20mmx20mmx3mm including necessary hinges and holdfast of size 100mmx20mmx3mm (2 Nos.), paintings etc. complete as directed by the Departmental Officer (rate inclusive of earthwork in excavation, rubble packing 10cm thick, refilling of excavated earth etc. complete as per the standard drawing). In the various Scattered locations as per the direction of the Engineer -in-charge
1
-
-
... More
Extra for perforations for 110mm PVC pipe of class 10 kg/Sq. Cm. Staggered perforations of 25mm diameter at every 150mm interval and 50mm spacing across a curvature of 160degree.
368
-
-
... More
Providing flexible braided PVC pipes in 30m lengthsalong with accessories complete a. 20mm dia with capit valve and riser
100
-
-
... More
Filtration Unit a. Providing and installing Super Flow sand Filter 25m³/hr 2”
1
-
-
... More
Filtration Unit b. Providing and installing screen filter 25m3/hr
1
-
-
... More
Filtration Unit c. Supplying and fixing at site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 (350 mm & above), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A) - 65mm Dia
1
-
-
... More
Filtration Unit d. Providing and laying C.I. Right angled type spring loaded single seat pressure relief valve similar to Glenfield H 19 having valve and seat gun metal bushes in cover stay rods of forged mild steel spring of best quality square section cast iron bend, wheel for adjustment with necessary pointer and index. (Class B) - 50mm Dia
2
-
-
... More
Rotars & Accessories a. Providing long distance rotary popup sprinklers
20
-
-
... More
Rotars & Accessories b. Providing and installing 10 cm (4") Popup Spray Body
100
-
-
... More
Rotars & Accessories c. Providing and installing 4.6 m Radius adjustable Arc Nozzle sprinklers
65
-
-
... More
Rotars & Accessories d. Providing and installing 5.2 m Radius adjustable Arc Nozzle sprinklers
65
-
-
... More
Rotars & Accessories e. Providing and installing 1.5 x 4.5 M corner strip Left
10
-
-
... More
Rotars & Accessories f. Providing and installing 1.5 x 4.5 M corner strip Right
10
-
-
... More
Rotars & Accessories g. Providing and installing 1.5 x 9 M Center strip
2
-
-
... More
Rotars & Accessories h. Providing and installing 1/2" X 30 cm Standard Swing Joint, 4 Swing Elbows
100
-
-
... More
Rotars & Accessories i. Providing and installing 3/4"X30cm standard swing joint
10
-
-
... More
Rotars & Accessories j. Providing and installing Service Saddle 63 mm x 1 3/4"
10
-
-
... More
Rotars & Accessories k. Providing and installing Service Saddle 50 mm x 1/2"
80
-
-
... More
Valves & Accessories a. Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
2
-
-
... More
Valves & Accessories b. Valve Box 9"
5
-
-
... More
Valves & Accessories c. Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP
1
-
-
... More
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc
1
-
-
... More
Automization:- Providing and installing FRP panel box cabinet (1 nos), IC 8 station control station with SP priventer (1 nos),Toggel switch(1 nos), 2"Solinoid valves (9 nos), 1 sq mm copper wire approx. 800m with conduiting along with fitting and charging of automization system
1
-
-
... More
Providing anti termite treatment to the building conforming to IS:6313 (part II) 1971 (revised) including adopting the precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals plants, equipments etc required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guarantee period complete. (The payment will be made on the Plinth of the building) - Preconstruction
1629
-
-
... More
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
1011
-
-
... More
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
15
-
-
... More
Providing & laying of FIFA QUALITY approved synthetic football turf surface pile height 50mm thick with 100% Polyethylene fibres (monofilament straight fibres, 350-370 micron thickness, 13000-13500 dtex, tufted) over existing sub base including marking on the surface complete as per FIFA Specifications. Including joined/sewn seams, turf saturation with minimum 16-17 kg per m2 of Washed silica sand (paid separately) and minimum 17-19 kg per m2 SBR granular infil according to manufacturers' specifications, infill levels no less than 75% yarn height including combing the field, inlaying of all lines with white yarn complete. Roll width to be minimum 3.95m and length as per layout. The Tuft cloth to be UV-Stabilized Polypropelene with backing of Latex 1000 gr/m² Complete.
1091
-
-
... More
Suppying and placing in position mechanically bonded nonwoven geotextile 200 gsm made of virgin high tenacity polypropylene staple fibers which are UV stabilized. It should be characterized by a high resistance to installation damage, high water permeability, resistance to ultraviolet degradation and to biological & chemical environments normally found in soils. This separation barrier should cover entire field including the edges & perimeter drains. There should be overlap between panels (laid area will be measured, laps will not be paid separately)
1458
-
-
... More
Providing & Fixing in position Metal Goal Post (Dimensions Width/Depth/Ø80 mm) for Futsal as per FIFA QUALITY Standards. Each set of Goal Post will consist on 2 verticals with horizontal distance between inside of the posts 3.00m and 1 Horizontal with vertical distance from the lower edge of the crossbar to the ground 2.00m. Goal nets fixed without metal hooks. The depth of the goal from the inside part of the goalposts and facing the court must be at least 80cm at the top part and 100cm at the bottom including powder coating. Sprung loaded foot operated 32mm dia folding frame for easy storage & steel bottom bar including civil works complete. (1 set is complete goal post set on one side of playing field)
2
-
-
... More
Supplying and Laying of Synthetic Surface “SPURTAN WT or Equivalent” full EPDM – Qualipur mix system for Walking Track. SPURTAN WT or Equivalent is a single layer surface of EPDM granules bound with polyurethane. Not suited to spike traffic, however an ideal all weather cushioned surface for most outdoor sports, including tennis, netball and basketball.
236
-
-
... More
Providing & laying of ITF Classified 8 layers “PACE Court or equivalent” Synthetic Acrylic Surface for Tennis, Basketball, Volleyball, Badminton etc. including following: • One layer of PACE Court Acrylic Resurfacer or Eq • Five layers of PACE Court Cushion Coat or Eq • Two layers of PACE Court Color Coat or Eq • Game line Marking
519
-
-
... More
Movable Badminton posts :- Stylish Design, Made from 40X40 mm steel square tube with 60kg. of ballast weight. Roller wheels are provided to facilitate easy transport and storage.
This is designed for strength and stability, to support heavy net. with a large base maintain the stability. (1 set with 2 posts on either side to fix net)
2
-
-
... More
Providing and Fixing volleyball posts
1. Volleyball post 76 mm dia POST with red powder coating and Dia 60 mm adjustable upright with zinc plating. 2. Height can adjust 2M to 2.5m by manual pin locking system.
3. Volleyball post fixed by using Holdfast and concrete. 4. Manual winch is provided for tightening the net. Including net complete as per standards of game. (1 set with 2 posts on either side to fix net)
1
-
-
... More
Providing and fixing 30MM Basket Ball Board "A" Grade Board 100% Virgin Monomer with iron ring and net as per the direction of Architect/ Engineer in charge
1
-
-
... More
Providing and installing the Playing equipments on the RCC bed of 150mm. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. Equipments includes Multi-station play equipment (Hexagonal Deck ht 1.50m, Hexagonal roof, FRP delux plain slide ht 1.50m, FRP step ladder ht 1.50m, Rock scrambler ht 1.50m, FRP spiral slide ht 1.50m, and RATO railing) 1 No, Scrambler Set 4 1 Nos, Balancing Beam 1 No, Singler Todler swing 1 No, Double Arch swing 1 No, Standard See Saw 1 No, Vertical rope net scrambler 1 No, Walking Barrel 1 No, Funnel Scrambler 1 No and A to B Scrambler 1 No.
1
-
-
... More
Providing and installing garden benches of size 5ft x 1.5ft -18 Gauge stainless steel of approved design over a bed of cement concrete (1:4:8) as per the drawing including excavation in foundation , proper hold fasting etc Complete as per the direction of the Engineer-in-charge/ Architect
13
-
-
... More
Providing & Fixing Signage made of 6mm thick transperent/ coloured acrylic sheet base material. The graphic should be computer cut self adhesive vinyl covered with clear vinyl to protect from peeling. The signage should be fixed with 12mm dia S.S. studs or S. S. Mirror screws.
3
-
-
... More
Providing and fixing signages made from aluminium composite panel 4mm thk. base material with computer cut self adhesive vinyl graphic covered with clear vinyl to protect from peeling. The signage shall be fixed with 12mm dia S.S. studs or S.S. mirror screws.
2
-
-
... More
Providing, Supplying & Installation of 900x100x18mm thick WPC Profile Cut Planks as per attached drawing, planks fixed to MS/SS Frames with Adhesive Glue to fix WPC to MS/Stainless Steel, & SS 304 fasteners/Screws including transport, handling etc complete (Excluding cost of MS/stainless steel framing).
812
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit (heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group C -- with Cat B Modular Accessories
8
-
-
... More
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.
4
-
-
... More
Supplying and fixing brass batten/ angle holder including connections etc as required.
4
-
-
... More
Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.
4
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) ,IS:7098(Part I) with latest amendments of following size. - 3 1/2 Core 25 sq.mm
70
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. - 4 Core 4 sq.mm
1335
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. - 4 Core 2.5 sq.mm
458
-
-
... More
Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size :- 2 Core 1.5 sq.mm
234
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 25 Sq. mm
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. - 4 x 4 Sq. mm.
18
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. - 4 x 1.5/2.5 Sq. mm.
9
-
-
... More
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 2 x 1.5/2.5 Sq. mm.
39
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.- Rocky Strata
55
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required - Rocky Strata
1578
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing masonry open duct, etc. complete as required
464
-
-
... More
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e) Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In rocky strata
4
-
-
... More
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe . g)watering arrangement(plumbing will be paid seperately). (a) In rocky strata
4
-
-
... More
Extra for using salt and charcoal for GI or copper plate earth electrode as required (96 Kgs of Charcoal and 5 Kgs of Salt)
8
-
-
... More
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
70
-
-
... More
Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required
6
-
-
... More
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required
37
-
-
... More
Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required
2670
-
-
... More
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).
71
-
-
... More
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 11m & 12.5m high octagonal /conical GI pole).
10
-
-
... More
Providing & erecting 3 m high galvanised conical pole with foundation bolts having bottom dia. from 105 to 115 mm, top dia. from 65 to 75 mm on provided foundation as per specification no.OH-PL/CPL
3
-
-
... More
Providing & erecting 5 m high galvanised conical pole with foundation bolts having bottom dia. from 125 to 145 mm, top dia. from 65 to 75 mm on provided foundation as per specification no.OH-PL/CPL
18
-
-
... More
Providing & erecting 12 m high (clear height) galvanised octagona pole with foundation bolts having bottom of 240 mm A/F, top 90 mm A/F on provided foundation as per specification no. OHPL/OPL
10
-
-
... More
Supplying and erecting 40W LED post top made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection on provided pole/ bracket.
3
-
-
... More
Supplying and erecting Recess mounted 20W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)
20
-
-
... More
Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2
18
-
-
... More
Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2
10
-
-
... More
Supplying and erecting cylindrical shaped integral decorative with high power 12W-16W LED bollard upto 1000mm with opal acrylic diffuser and IP65 protection on provided foundation complete.
50
-
-
... More
Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification No. FG-ODF/GLT
6
-
-
... More
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.
6
-
-
... More
Supplying and erecting water tight terminal box of 1.6mm thick ( 16 gauge ) CRCA sheet of size 200 x 150 x 150 mm complete on pole as per speciffication no CB-SB
118
-
-
... More
Supply, Fabrication, Erection, Testing and Commissioning of Main Panel floor mounted with frame of suitable M.S channel dully painted, fabricated of 14/16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by client and having following items as per single line diagram:- 40A, 10KA, TP MCB - 1 no. wired for KWH meter ( 3 ph) with 100A, 4P aluminium bus bar with outgoing feeders of 6-32A, 10KA, TP, MCB 15 nos complete as per single line drawing of MLTP
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements