Goa State Urban Development Agency Tender
View complete overview of Goa GSUDA Tender
Costs
EMD
₹ 27,92,250Document Cost
₹ 4,000Tender Fee
₹ 6,000
Summary
Construction Of Commercial Complex At The Site Of Old Power House At Baina For Mormugao Municipal Council
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_GSUDA_6027_1Bid Award Id
ViewTender No
43/3/GSUDA/E-TENDER/59/1746Tender Authority
Goa State Urban Development Agency ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling tiled roofing (Mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50m lead
28
-
-
Carraige of unserviceable material such as buiding rubbish,wood,earth excavated rock etc for all leads and lifts beyond up to 2km
163
-
-
Removing & refixing of existing 49 nos shops made of 2mt.x2mt. M.S box with roofing kept on proposed platform made up of foundation of UCR masonary,RCC bed with smooth plaster finish & covered on all side with partition sheets with minor fabrication and errection works of all structural steel members as per drawing, and instruction of Engg-in-charge.
49
-
-
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area.
14
-
-
Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :
-
-
-
Beyond 60 cm and upto 120 cm grith
1
-
-
Beyond120 cm and upto 240 cm grith
2
-
-
Beyond 240 cm girth
1
-
-
Earth work in excavation by mechanical / manual means in all types of stratas comprising of any type of materials such as soil, silt clay, sand , gravel,murrum of all types of conglomerates,laterite rock, soft rock, ordinary rock disintegrated rock fissured/shattered rock, decomposed rock, weather rock, bituminous road layers and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chisseling, wedging etc. in all conditions such as dry moist, foul, saturated, submerged etc. as directed by Engineer etc. all complete including dressing of sides ramming of bottom including all lead and lift , including gettting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by engineer upto depth of 3.50 mts( blasting prohibited including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil
5054
-
-
Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in: b)Hard soil
369
-
-
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
752
-
-
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.b)Moorum
122
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
361
-
-
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing: a)All works upto plinth level
219
-
-
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level
-
-
-
M-30 grade of concrete
2297
-
-
M-40 grade of concrete
323
-
-
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
-
-
-
String courses, copings, bedplates, anchor blocks, plain window sills and the like.
8
-
-
Small lintels not exceeding 1.5 m clear span, including coping and the like requiring form work to the suspended portions.
18
-
-
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
422562
-
-
Centering & shuttering including Strutting, Propping & removal of forms for :
-
-
-
i)Foundations, Footings, Bases for columns
1010
-
-
ii)Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
1019
-
-
iii)Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
2696
-
-
iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
5798
-
-
v)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth
222
-
-
vi)Staircases (except spiral staircases) excluding landing
10
-
-
xiii)Suspended floors, roofs landings, shelves & their supports
4334
-
-
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates.Where inclination to the horizontal exceeds 30° requiring shuttering on the underside & upperside if required (Only area of underside shall be measured for payment)
113
-
-
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1009
-
-
Providing and fixing G.I. sheet of 26 S.W.G. for using in construction/Expansion joint wherever necessary as per directions of the Engineer-in-Charge.
39
-
-
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement.
73
-
-
Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in superstructure size of blocks (30 x 23 x 15) floor V level
659
-
-
Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in partition walls size of blocks (30 x 20 x 10)
1489
-
-
Providing and filling joints between concrete and masonry wherever specified in cement mortar including racking the joints to form "V" groove, applying neat cement slurry, filling with aggregate of 20 mm or less (Katka) in cement mortar 1:4 (1 cement : 4 fine sand), cleaning and curing etc. to avoid cracks at the joints.
2290
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.b)Second class Indian teak wood
3
-
-
Providing flat iron hold fast 40 mm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. b)40 x 3 mm flat iron hold fast 15 cm long
480
-
-
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws : Plain grill
1624
-
-
Providing and fixing flush doors shutters commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering and vertical grains or cross bands and face veneers on the both other faces of shutters. b)35mm thick including anodized aluminium butt hinges with necessary screws:
157
-
-
Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete.
314
-
-
Extra for providing vision panel not exceeding 0.1 sq.m. in all types of flush doors (cost of glass excluded).a)Rectangular or square Unit: SQ.M. door area
19
-
-
Providing and fixing 38 mm thick louvered shutters with fixed or movable venetians 12 mm thick for windows including bright finished or and black enamelled, iron hinges with necessary screws. a)Second class Indian teak wood
28
-
-
Providing and fixing 6 mm clear glass of size 200x1200mm
3
-
-
Providing FRP door shutters 35mm thick with frame size in clear opening of 0.80x2.20m hinges and screws complete.,
102
-
-
Providing and fixing bright finished C. P. Brass/brass door latch with necessary screws etc complete - 250 x 16 x 5 mm
58
-
-
Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
11
-
-
Providing and fixing chromium plated brass handle with necessary screws etc. Complete : a) 125 mm
61
-
-
Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
41
-
-
Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality).
42
-
-
Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation
58
-
-
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
6
-
-
Providing and fixing hydraulic floor spring of reputed make Everrite, prabhat or equivalent as per the manufacturer's as specification having double action spring as approved by the Engineer-in-charge.
10
-
-
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. a)In R.S. joists, channels, angles, tees
18
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
18256
-
-
Three track Sliding Windows are made out of 97mm x 43mm x 2mm upvc multi-cavity reinforced with G.I. channel and having up word projection for sliding of shutter on Nylon Rollers and having slope for draining rain water outside and welded in corners. Shutters are made out of 57mm x 31mm x 2mm multi-cavity section having provision for nylon rollers fixing, glass fixing with EPDM gasket, glass bead and welded in corners. In Three Track Sliding window 4mm clear glass is used. The average weight of Three Track Sliding window is 16.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
109
-
-
Two Track sliding window in economical section made out of 60mm x 45mm x 2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
72
-
-
Providing and fixing Anodized Aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer : adjustable louvred windows (louvre blades of thickness 1.20mm) with figured glass. All work between civil work and aluminium frames shall be sealed and made watertight by applying silicone sealant Rectangular tube @0.478kg/m 50.8x25.4x1.20 U Channel top & bottom @0.073kg/m 9.52x9.52x1.10 4 mm thk figured glass, EPDM gaskets complete with accessories for locking, handles, stopppers etc. Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
44
-
-
Providing supply and installation SS 304 grade Buff finish with clear toughened glass of height 1200mm. grouted in floor with U channel and top rail of SS 304 grade 50mm diameter mounted on glass and secured on both ends in concrete complete without baluster gap between each glass panel of 10mm minimum. Ledge wall required to your scope, maximum width without support 3mts.
300
-
-
Providing supply and installation of SS 304 grade railing matt finish using 2" O.D. 2mm thick top rail with vertical post made up of 1 .5" O.D. 2mm thk. And 1.5"x10mm flat placed alternatively between two vertical post and four mid rails of 16mm sq. bars. Vertical post shall be placed at every 1.5mtr. c/c and fixed to the floor using chemical grouting etc. complete
46
-
-
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
253
-
-
Providing and fixing Ball bearings for rolling shutters.
112
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock and stopper etc.to be paid separately)
2
-
-
Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastner of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer.
-
-
-
10 x 60 mm.
4
-
-
10 x 120mm
4
-
-
Supply & Fixing of Plain Hilux Board 8x4x12mmthick (Fixed Structure) Hilux Board 12mm thick upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75mm overall thickness Partition with 12mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm
265
-
-
Providing and laying vitrified industrial floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete b)300 x 300 mm dark Shades - 12mm thick (basic rate of tiles -1050/sqm)
988
-
-
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete
-
-
-
600x 600 mm Dark Shades (basic rate -805/sqm)
972
-
-
900x 900 mmDark Shades (basic rate - 921/sqm)
789
-
-
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete a)25 mm thick. (basic rate of tile- 592/sqm)
917
-
-
Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete a)Dark Shades(basic rate - 360/sqm)
267
-
-
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. a)600 x 600 mm - Dark Shades
-
-
-
600x 600 mm Dark Shades (basic rate -805/sqm)
914
-
-
900x 900 mm Dark Shades (basic rate - 921/sqm)
52
-
-
Providing and fixing 18 mm thick Granite of any colour and Shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm a)Jet Black (basic rate of granite- 1991/sqm)
255
-
-
Providing 20mm thick marble slab to urinal partitions with cement etc. complete (basic rate of marble- 1891/sqm)
5
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. d)Cat Eye (basic rate - 2098/sqm)
151
-
-
Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete
63
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
61
-
-
Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete a)Jet black (basic rate - 1991/sqm)
376
-
-
Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete a) Jet black (basic rate- 2098/sqm)
70
-
-
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.
-
-
-
60 mm thick in all colours except grey (basic rate of pavers-1085/sqm)
108
-
-
60mm thick with Grey colour (basic rate of pavers-885/sqm)
434
-
-
Jaisalmer stone flooring with 18mm thick polished Jaisalmer stone over 20mm (average) thick base of CM 1:4 (1 cement : 4 Coarse sand) with joints finished flush
18
-
-
Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement Mortar 1:4 (1 cement:4 coarse ) using : b)White Makrana Marble with blue or black veins( basic rate -736/sqm)
30
-
-
Providing of Poly Carbonate Clear Transperent roof sheet 2mm thick.
184
-
-
Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
722
-
-
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
1371
-
-
Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent
2449
-
-
Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly laterite/ brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
7905
-
-
12mm cement plaster 1:4 (1 cement : 4 coarse sand)
2289
-
-
Providing and applying gypsum plaster with bondit in ceiling( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 millimeter thickness to previously plastered surface / or on newly brick/ concrete surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
6214
-
-
6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)
1775
-
-
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
3936
-
-
Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.
-
-
-
a)10 M TO 13 M hight
385
-
-
b)13 M TO 16 M hight
384
-
-
c)16 M TO 19 M hight
309
-
-
d)19 M TO 21.90 M hight
494
-
-
Extra for providing and mixing water proofing material proportion recommended by the manufacturers. e)20mm cement plaster 1: 3 (1 cement : 3 sand)
3936
-
-
12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) 1 meter long, 1 cm wide
460
-
-
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
116
-
-
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2327
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
17339
-
-
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
17339
-
-
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
3936
-
-
Extra for painting on walls on the outside at height more than 10m from ground level for every additional height of 3.0 m or part thereof.
1572
-
-
Providing and fixing white vitereous Europen wall Mounted water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous low level flushing cistern with fittings and brackets 40 mm white precelain of approved design complete, including cutting,Fixing the frame and making good the walls and floors where required. W.C. pan with white plastic seat and lid
58
-
-
Providing and fixing white virtreous china water closet squating pan size 580 mm: Long pan pattern (indian type) w.c. pan
6
-
-
Providing and fixing 15 litres low level white vitreous china flushing cistern of approved make with fittings such as lead, valveless syphon etc.
and C. P. brass handle complete.
6
-
-
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. b)Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.
4
-
-
Providing and fixing vitreous china under counter wash basin , 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. Under counter wash basin size 570mm x 450mm with a single 15 mm C.P. brass pillar taps.
57
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. One urinal basin with 5 litres p .v .c. automatic flushing cistern.
17
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.
-
-
-
a)Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
2
-
-
c)Overall size 535mmx460mm (21"x18") bowl size 460mmx380mmx200mm (18"x 15"x 8") depth 200 mm. Glossy. 1.0mm thk, (conference+ pantry on sf)
2
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993. 15mm nominal bore
56
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
54
-
-
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards
54
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore
127
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore
4
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.
-
-
-
20 mm dia nominal outer dia pipes.
26
-
-
25 mm dia nominal outer dia pipes.
83
-
-
32 mm dia nominal outer dia pipes.
119
-
-
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)
-
-
-
32mm outer dia.
310
-
-
40mm outer dia.
458
-
-
Providing & Fixing In Position 25 mm diameter mosquito proof coupling of approved municipal design.
12
-
-
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
38
-
-
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
42
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
-
-
-
110 mm dia
122
-
-
75 mm dia
13
-
-
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :
-
-
-
100 mm dia
5
-
-
75 mm dia
7
-
-
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:
-
-
-
110 mm dia.
16
-
-
75 mm dia
15
-
-
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
110 mm dia
23
-
-
75 mm dia
45
-
-
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
110 mm dia
19
-
-
75 mm dia
16
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
75 mm dia
443
-
-
110 mm dia
535
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
150 mm dia
32
-
-
200 mm dia
120
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a)110 mm dia
66
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b)100 x 150 mm size P or S type
3
-
-
Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :
-
-
-
110 mm dia
240
-
-
75 mm dia
310
-
-
Providing and fixing R.P.V.C. vent cowl:
-
-
-
110 mm dia
7
-
-
75 mm dia
14
-
-
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
1
-
-
Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: b) For pipe 250 to 300 mm dia
1
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
7
-
-
Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
15
-
-
Providing and fixing ball valve (brass) of approved quality : b)Low pressure with copper. floats :
-
-
-
20 mm nominal bore
39
-
-
25mm nominal bore
6
-
-
Providing and fixing non-return valve of approved quality : b)32 mm nominal bore
4
-
-
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: 45 cm (18”) length.
144
-
-
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a) Pre-construction
1576
-
-
Providing and fixing signage made of base material made of 6mm thick transparent/coloured acrylic sheet. The Graphic is of computer cut self adhesive vinyl covered with clear vinyl to protect from peeling. The signage shall be fixed with 12mm dia SS studs or ss mirror screw
5
-
-
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. d)Size 60 cm L x30 cm H x 10cm T
20
-
-
Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a)Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity.
195
-
-
Aerofiber Woody wool colour 595x595x15mm, square edge (T24 Grid system) Supply & Fixing of Roll formed U-Baffle Ceiling System along with 180B infill panel fixed to custom made carrier system, comprising of Roll formed U-baffle width of 50 mm and height of 150 / 200 mm manufactured out of 1mm thick Aluminium along with 180mm Linear panel 180B manufactured out of 0.6mm thick Aluminium Perforated with 2.0mm dia with 5mm pitch to form 16% openness with Acoustical NWT self-glued to the panel on a continuous roll forming line, Coil Coated Aluminium of alloy AA 3105 at a module of 240 mm. The U baffle and 180B shall be manufactured on an integrated high speed, high precision Roll forming machine to avoid micro-cracking of metal corners which occurs while bending on press brake machines. The U baffle and 180B panel coil is coated with Interior Polyester Paint on a continuous paint line double baked and shall be stove enamelled in a continuous coil coating process with the approved colour on the exposed side and the reverse side with polyester primer. The coated coil is passed thru ARKU SIX Hi configuration roller levelling process to ensure the flatness of the coil. The manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant with the past history and experience on supply of Metal ceiling to Bangladesh, Asian and Europe airport projects. Carrier: The Panel shall be clipped to a backed enamelled aluminium panel carrier of 0.9mm thick in standard length of 5 mtrs made of double backed enamelled aluminium alloy AA3105/AL3005 (Al.Mg) black with cut outs to hold the panels in a module of 250mm. Suspension: The carrier shall be suspended with M6 Threaded rod hangers spaced at 1200mm c/c. The length of the panel shall be up to 2400mm. Paint finish: Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (inner side) with a primer coating and skin coat on a Continuous Paint Line. Suspension System:As per manufacturer standard it is recommend to have minimum gap of 250mm between plenum and its baffle top surface height for easy engagement of spring. Mode of Measurements: Measurements shall be wall to wall, measuring the Surface / plan area without any deductions for lights, diffusers, columns or any other openings etc. (4th floor mini hall- False ceiling ) The manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant with the past history and experience on supply of Metal ceiling to Bangladesh, Asian and Europe airport projects. Carrier: The Panel shall be clipped to a backed enamelled aluminium panel carrier of 0.9mm thick in standard length of 5 mtrs made of double backed enamelled aluminium alloy AA3105/AL3005 (Al.Mg) black with cut outs to hold the panels in a module of 250mm. Suspension: The carrier shall be suspended with M6 Threaded rod hangers spaced at 1200mm c/c. The length of the panel shall be up to 2400mm. Paint finish: Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (inner side) with a primer coating and skin coat on a Continuous Paint Line. Suspension System:As per manufacturer standard it is recommend to have minimum gap of 250mm between plenum and its baffle top surface height for easy engagement of spring. Mode of Measurements: Measurements shall be wall to wall, measuring the Surface / plan area without any deductions for lights, diffusers, columns or any other openings etc. (4th floor mini hall- False ceiling )
88
-
-
Aerofiber Softra shapes raft texture hexagon,1000mm dia 30mm Thickness Nos 48 6050 290400.00 Supply and installation of Aerofiber Softra raft texture, of hexagonal shape, 30mm thk of 1000/1200mm diameter,which are having glassfibre core, textured finish and are fully encapsulated. Panels are having density 100-120 kgs/m3 and weight 3- 3.6kg/m2. Each panel is provided with 4 sets of accessories containing spring hooks, levelling clip and hanger wires. Springs to be rotated and anchored at back of each panel at four points to hold the panel stable. Supplied hanger wires to be first dropped fromthe beam/slab/truss to desired height with suitable cleats/anchor bolts. Aerofiber softra Shapes Hexagonal texture panels are then suspended using spring hooks and hanger wires and levelled into position with supplied levelling clips. (Cleats and anchor) (4th floor mini hall- False ceiling)
48
-
-
Aerofiber woody wool raft hexagon, of size 600mm Diameter, 35mm thk , will be provided with two numbers of T- Groove, at rear Nos 48 1680 80640.00 of each panel.Insert Aerofiber Ceiling Grid MT24W36 with flange width 24mm, height 38mm and length 3600mm, inside T Groove Provided.MT24W36 to be fastened to panels for additional support and sturdiness. Skelet MT24 is then Suspended using GI wires, i.e two GI wires per Skelet T24 to be used.Total 4 No.s of GI Wires should be suspended using Anchor Bolt, Soffit Cleat and S-hook from the soffit slab and levelled into designed position. (Anchor bolts, Soffit Cleat and S-hook not by Aerofiber)..
48
-
-
Supply and installation of Aerofiber Softra texture, of hexagonal shape, 30mm thk of 1000/1200mm diameter,which are having glassfibre core, textured finish and are fully encapsulated. Panels are having density 100- 120 kgs/m3 and weight 3-3.6kg/m2. Eachpanel is provided with 4 sets of accessories containing spring hooks, levelling clip and hanger wires. Springs to be rotated and anchored at back of each panel at four points to hold the panel stable. Supplied hanger wires to be first dropped from the beam/slab/truss to desired height with suitable cleats/anchor bolts. Aerofiber softra Shapes Hexagonal texture panels are then suspended using spring hooks and hanger wires and levelled into position with supplied levelling clips.(Cleats and anchor bolts not by Aerofiber). (4th floor mini hall- False ceiling)
20
-
-
Supply and Installation of Aerofiber woody wool Baffle shapes,- Square,400x400x25mm, volume density 400Kgs/m3, weight 10kg/m2 suspended individually and vertically with pre-fixed U-clip20, by using hooks, levelling clip and hanger wires. Hanger Wire to be first dropped from the slab to desired height as per architectural drawing with suitable Anchor bolts and S hook. Aerofiber woody wool Baffle shapes are are then hung using pre-fixed U-clips andhanger wires.(Anchor bolts and S hook not by Aerofiber)
42
-
-
Supply and Installation of Aerofiber woody wool Baffle, magnesite-bonded pinewood fibre acoustic baffle of size 400x1200x25mm, volume density 400Kgs/m3, weight 10kg/m2 suspended individually and vertically with pre-fixed U-clip20, by using hooks, levelling clip and hanger wires. Hanger Wire to be first dropped from the slab to desired height as per architectural drawing with suitable Anchor bolts and S hook. Aerofiber woody wool Baffle shapes are are then hung using pre-fixed U-clips andhanger wires. (Anchor bolts and S hook not by Aerofiber)
42
-
-
Supply and Installation of Aerofiber woody wool Baffle Shapes, S Curve Uno varient, magnesite-bonded pinewood fibre acoustic baffle of size 400x1200x25mm, volume density 400Kgs/m3, weight 10kg/m2 suspended individually and vertically with pre-fixed U- clip20, by using hooks, levelling clip and hanger wires. Hanger Wire to be first dropped from the slab to desired height as per architectural drawing with suitable Anchor bolts and S hook. Aerofiber woody wool Baffle shapes are are then hung using pre- fixed U-clips and hanger wires.(Anchor bolts and S hook not by Aerofiber)
240
-
-
Supply and Installation of Aerofiber woody wool Mozaic, square fine bevel edge, triangle shape, placed to create incredible patterns, magnesite bonded pinewood fibre core panels of 595mm diameter , volume density 600kgs/m3, weight 12kg/m2adhered on Aerofiber Tufbloc Spots, square edge, 600x600x8mm by using Aerofiber Strut framework system. The Aerofiber Strut framework systems includes Aerofiber Ceiling Section 25 thickness 0.55mm, length 3600mm, knurled web 35, depth 25mm and equal flanges 15mm is fastened (fasteners at 300mm staggered, not by Aerofiber) to base wall, positionedhorizontally in a regular manner at 600mm centres. Cement Sheet is then fastened perpendicular to Strut CC25. woody wool shapes of 595mm diameter are adhered on Cement Sheet using Adhesive SR 998 SR 998 SR 998 to achieve desiredpattern The system is backlined with the acoustical infill Aerofiber Echowool 10x25 adhered on wall with Adhesive SR 998 SR 998 SR 998 The anutone or equivalent Strut framework systems includes anutone or equivalent Strut CC25 thickness 0.55mm, length 3600mm, khurled web 35, depth 25mm and equal flanges 15mm is fastened (fasteners at 300mm staggered, not by anutone or equivalent) to base wall, positioned horizontally in a regular manner at 600mm centres. anutone or equivalent Tufbloc Spots is then fastened perpendicular to Strut CC25. Strand Shapes of 595mm diameter are adhered on Tufbloc spots using Stick GS to achieve desired pattern. (4th floor banquet hall-wall paneling)
74
-
-
Supply and installation of Aerofiber Echo Panel, polyfibre panels, core-pigmented, highdensity, Echo wool rigid panels of size 1200x2400x9mm thk, volume density 220kg/m3, weight 1.9kg/m2 and Aerofiber woody wool, square edge Magnesite bonded pinewood fibre core tiles of size 600x1200x10mm, volume density 400kgs/m3, weight 4kg/m2 installed by using Aerofiber Strutframework system. Aerofiber Strut framework system includes Aerofiber Strut CC25 thickness 0.55mm, length 3600mm, knurled web 35, depth 25mm and equal flanges 15mm is fastened to wall or framework behind vertically/horizontally at every 600mm c/c. Aerofiber woody wool is installed on the Strut CC25 Cross Channel with suitable fasteners at 600mm centers. Longer edges of the panel should be perpendicular to length of Strut CC25. Adhesive SR 998 applied on Aerofiber woody wool and at rear of Echo Panel Panel. Prior to installation, ensure surface behind are flat, dry and free from dust or other contaminants and leveled. Echo PanelPanels are then adhered to woody wool Panels behind with Adhesive SR 998.
Panels are backlined with Aerofiber Echo wool 10x25 held in position with Adhesive SR
998 anutone or equivalent Strut framework system includes anutone or equivalent Strut CC25 thickness 0.55mm, length 3600mm, khurled web 35, depth 25mm and equal flanges 15mm is fastened to wall or framework behind vertically/ horizontally at every 600mm c/c. anutone or equivalent Strand is installed on the Strut CC25 Cross Channel with suitable fasteners at 600mm centers. Longer edges of the panel should be perpendicular to length of Strut CC25. anutone or equivalent Sticks S7 is adhesive applied on anutone or equivalent Strand and at rear of synth Slim Panel. Prior to installation, ensure surface behind are flat, dry and free from dust or other contaminants and leveled. Synth slim Panels are then adhered to Strand Panels behind with stick S7 adhesive. (5th floor banquet hall-Wall paneling)
40
-
-
Supply and Installation of Aerofiber woody wool Baffle Shapes, S Curve Uno varient, magnesite-bonded pinewood fibre acoustic baffle of size 400x1200x25mm, volume density 400Kgs/m3, weight 10kg/m2 suspended individually and vertically with pre-fixed U- clip20, by using hooks, levelling clip and hanger wires. Hanger Wire to be first dropped from the slab to desired height as per architectural drawing with suitable Anchor bolts and S hook. Aerofiber woody wool Baffle shapes are are then hung using pre- fixed U-clips and hanger wires.(Anchor bolts and S hook not by Aerofiber)
227
-
-
Providing 18mm thick plaster of parts (gypsum anhydrous) ceiling upto height of 5m above floor level over 1st class matti wood strips 25 x 6mm with 10mm gap in between & reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) Flat Surfaces
277
-
-
Providing & placing Nilkamal Chairs 4002 including transporting to site.
700
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. '(f) Group C -- with Cat B Modular Accessories
496
-
-
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
123
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat B
85
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (b) Cat B
99
-
-
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc as required. (b) Cat B
70
-
-
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required (b) Cat B
74
-
-
Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required
85
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(medium) of appropriate size as required.
-
-
-
(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)
534
-
-
(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
270
-
-
(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
1044
-
-
(i) 4 x 4 sq.mm + 2 x 4 sq.mm earthwire (25mm Conduit)
766
-
-
Supplying and fixing following size moduleas GI box alonwith modular base and cover plate for modulator switches in recess etc. as required '(f) 1 or 2 Module ( 75 mm x 75 mm) Cat B
114
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required Telephone socket outlet Cat B
114
-
-
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having following pair(s), complete as required. (a) 2 Pair
2925
-
-
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6
870
-
-
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm
845
-
-
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner
2
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP).
72
-
-
Providing earthing with Copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg of maintenance free earth conductivity enhancing mineral earthing compound complete with all materials, testing & recording the results as per specification no ESE -LA
2
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098 (Part II) with latest amendments of following size.
-
-
-
4 Core 2.5 sq.mm
300
-
-
4 Core 10 sq.mm
132
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE cable of 1.1 KV grade, complete as required.
-
-
-
4 Core 2.5 sq.mm
4
-
-
4 Core 10 sq.mm
4
-
-
4 Core 50 sq.mm
2
-
-
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 50 sq.mm
30
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
432
-
-
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size.
-
-
-
(7)3 1/2 Core 150 sq.mm
300
-
-
(10) 3 1/2 core 300 sq.mm
90
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
3 1/2 Core 150 sq.mm
12
-
-
3 1/2 Core 300 sq.mm
8
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
30
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required
390
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required (b) In rocky strata
250
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata
40
-
-
Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) 12 way double door CAT B
44
-
-
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)
-
-
-
(d) 4 way (8+12), double door, Vertical type, Cat B
68
-
-
(e) 8 way (8+24), double door, Vertical type, Cat B
2
-
-
(e) 12 way (8+36), double door, Vertical type, Cat B
2
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
SP, Cat B
79
-
-
TP, Cat B
48
-
-
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) TP, Cat B
3
-
-
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
-
-
-
(i) TP, Cat B
3
-
-
(j) TPN, Cat B
3
-
-
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required 25 A, Cat B
44
-
-
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required
-
-
-
25 A, Cat B
3
-
-
40 A, Cat B
68
-
-
63 A, Cat B
2
-
-
Supplying and fixing SP blanking plate in the existing MCB DB complete as required
200
-
-
Supplying and erecting corridor/passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same
107
-
-
Supplying and erecting Recess mounted 20W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)
6
-
-
Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no.FGFGIDF/BHF
11
-
-
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) suitable for 9 W - 12 W with provision for plane front frame with translucent cover fixed to the housing complete.
79
-
-
Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface
12
-
-
Supplying & erecting T8 LED 20W tube light fitting (4 feet)with aluminium housing, heat sink, integrated HF electronic driver complete( including lamp).
385
-
-
Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.
59
-
-
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.
30
-
-
Supplying, installing, testing and commissioning solar street light pole comprising of 14W LED fitting, 12V 36Ah maintenance free lithium battery, min. 75Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL (with 5 years warrantee )
8
-
-
Providing and fixing M.V. Danger Notice plate of 200mm x 150 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required
12
-
-
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
8
-
-
Supplying and erecting water light terminal box of 1.6mm thick ( 16 gauge ) CRCA sheet of size 200 x 150 x 150 mm complete on pole as per speciffication no CB-SB
12
-
-
Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearing, 1400 rpm, complete with all accessories. (a) Cat A
30
-
-
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required.
30
-
-
Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.
12
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat B
85
-
-
Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (b) Cat B
85
-
-
Supply, Installation, testing & commissioning of IP CCTV Surveillance system: 2MP FHD Fixed lens 3.6mm Dome WDR/2D&3D DNR/PoE IP66 Day Night Network Camera as per specification with back box
50
-
-
Supply, Installation, testing & commissioning of IP CCTV Surveillance system:2MP FHD Fixed lens 3.6mm Bullet WDR/2D&3D DNR/PoE IP66 Day Night Network Camera as per specification
4
-
-
Supply, Installation, testing & commissioning of standalone 16ch Professional NVR 2 Bay HDD as per specification
4
-
-
Supply, Installation, testing & commissioning of 4TB Surveillance HDD in NVR
4
-
-
Supply, Installation of 32"Led TV Monitor
4
-
-
Supply, Installation, testing & commissioning of Web smart switch
8
-
-
Supplying and fixing 1 meter length, UTP Patch cord of Cat 6
type in position as per specification No. WG-COC/PC
22
-
-
Supplying and fixing 6U Wall Mount Rack (Dimension-DxWXH -
450X550X367 mm) as per specification in approved manner
2
-
-
Supplying, installing & testing UTP Connector (RJ-45) as per specification No. WG-NAS/UTPC.
44
-
-
Supplying and fixing 24 port Patch Panel with tool-less keystone jacks in provided U Rack complete as per specification no. WGNAS/ PP
2
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CBLT/CU
300
-
-
Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP
1
-
-
Supplying, installing, testing and commissioning of additional Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP
1
-
-
Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD
130
-
-
Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP
22
-
-
Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR
22
-
-
Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification no. FF-FRM
4
-
-
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. (7) 3 core 185 sq.mm
45
-
-
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 Core 185 sq.mm
2
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata
30
-
-
Supplying and erecting approved make 11 kV out door type gang operated air break, triple pole switch 200A, capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of C class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.
1
-
-
Supplying and erecting approved make, 11 kV out door type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15 Amps capacity complete erected on provided cross arm.
1
-
-
Supplying and erecting Distribution class, 11 kV thyrite type lightening arrester, on provided cross arm as per specification No. OH-INS/LA
3
-
-
Supplying and erecting anticlimbing devices, fabricated from pole clamps of MS Flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erected on pole.
2
-
-
Providing & fixing H.T. Danger notice plate of 250mmx200mm made of mild steel atleast 2mm thick &vitreous enamelled,white on both sides & with inscription in signal red colour on front side as required.
2
-
-
Supplying and erecting PSC rectangular pole of top 105 x 115 mm & bottom of 105 x 315 mm 9 m long (510 kg) complete erected in provided C. C. foundation & muffing (square/round) as per specification No. OH-PL/PSC
2
-
-
Supplying & erecting 11 kV 630A, Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided cc foundation/MS channels/trench, etc, in an approved manner as per specification no SW-HTS / RMU
1
-
-
Supplying and Erecting approved make compact substation with 400 kVA, 3 phase, 50 Hz., ONAN type thermal class K10, 21kA for 3 sec. SF6 insulated non-extensible compact switchgear (type DVNE/RT2-NE) consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm aluminium unarmorured XLPE cable. copper wound transformer 400 kVA 11 kV/433V DYn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, without conservator type of design & top normal porcelain bushings for HT & LT with off load tap switch of rating +5% to -10% @2.5%. temp rise - oil/winding 40/45°C losses (subject to IS 1180 energy efficiency level 2 ) - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-630 amps aluminium busbar (100% for phase and 50% for neutral, current density - 1amp/sqmm) with outgoings 630 A 433V 4P 50Hz 35kA ICOG, fixed manual type air circuit breaker (ACB) with microprocessor based release for overload , short circuit & earth fault protection., multifunctional meter with class 1.0 accuracy with RS 485 Port, RYB,ON/OFF trip indications, outdoor enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder/colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x150 sq.mm XLPE aluminium single core cable. interconnection between transformer & LT switchgear using aluminium busbars. internal earthling connections by using 50x6 mm GI strips including transformer neutral, complete with necessary permissions of electrical inspector as per specification no. SS- TR/COMP
1
-
-
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 62.5 kVA upto 82.5 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.
1
-
-
Supplying, erecting and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel, etc and obtaining necessary approval from Electrical Inspector as per specification no. GENDG
1
-
-
Supplying and Installing following size welded ladder type , 100mm depth , M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450 mm width X 100 mm depth with runner size25x100x25mm, rung size 20x40x20mm with rungs at 250mm c/c.(10SWG)
344
-
-
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.
-
-
-
300 mm width x 50 mm depth
344
-
-
150 mm width x 50 mm depth
45
-
-
Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
1
-
-
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
1
-
-
Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV
15
-
-
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete.
2
-
-
Provided pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 22kV supply.
2
-
-
Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.
4
-
-
Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30 x 30 x 4mm. Angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.
1
-
-
Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm. dia. M.S. Rod grouted in wall to a depth of minimum 15cms.
1
-
-
Supply, fabrication, Erection, testing and commissioning of panel fully compartmentalised, outdoor type, floor mounted with frame and dully painted, fabricated of 16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by electricity department as per SLD generally as per specification and comprising : 1 - Set 200A, 16KA, 1 Sec, TPN, Aluminum busbars. Incomer: 1 - 200A, TP, MCCB 36 KA with adjustable overload release and accessories Outgoing: 25 - Sets 20/25A, TP, MCB in a separate sealable compartment, with clear acrylic cover and mounting arrangements for a 3 phase electronic KWh meter as per GED specifications.meters part of supply).
1
-
-
Supply, fabrication, Erection, testing and commissioning of panel fully compartmentalised, outdoor type, floor mounted with frame and dully painted, fabricated of 16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by electricity department as per SLD generally as per specification and comprising : 1 - Set 200A, 16KA, 1 Sec, TPN, Aluminum busbars. Incomer: 1 - 200A, TP, MCCB 36 KA with adjustable overload release and accessories Outgoing: 25 - Sets 20/25A, TP, MCB in a separate sealable compartment, with clear acrylic cover and mounting arrangements for a 3 phase electronic KWh meter as per GED specifications (meters part of supply).
1
-
-
Supply, fabrication, Erection, testing and commissioning of panel fully compartmentalised, outdoor type, floor mounted with frame and dully painted, fabricated of 16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by electricity department as per SLD generally as per specification and comprising : 1 - Set 200A, 16KA, 1 Sec, TPN, Aluminum busbars Incomer: 1 - 200A, TP, MCCB 36 KA with adjustable overload release and accessories Outgoing: 44 - Sets 20/25A, SP, MCB in a separate sealable compartment, with clear acrylic cover and mounting arrangements for a 1 phase electronic KWh meter as per GED specifications. (meters part of supply).
1
-
-
Supply, fabrication, Erection, testing and commissioning of panel fully compartmentalised, outdoor type, floor mounted with frame and dully painted, fabricated of 16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by electricity department as per SLD generally as per specification and comprising : 1 - Set 200A, 16KA, 1 Sec, TPN, Aluminum busbars. Incomer: 1 - 200A, TP, MCCB 36 KA with adjustable overload release and accessories Outgoing: 20 - Sets 20/25A, TP, MCB in a separate sealable 02 - Sets 63A, TP, MCB in a separate sealable 01 - Sets 160A, TP, MCCB in a separate sealable compartment, with clear acrylic cover and mounting arrangements for a 3 phase electronic KWh meter as per GED specifications.(meters part of supply).
1
-
-
Supply, fabrication, Erection, testing and commissioning of panel fully compartmentalised, outdoor type, floor mounted with frame and dully painted, fabricated of 16 swg CRCA sheets completely derusted, chemically treated and powder coated with shade suggested by electricity department as per SLD generally as per specification and comprising : 1 - Set 400A, 16KA, 1 Sec, TPN, Aluminum busbars. Incomer: 1 - 400A, TP, MCCB 36 KA with adjustable overload release and accessories Outgoing: 10 - Sets 63 A ATS 10-Sets of 63 A
1
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc
2
-
-
Supplying & erecting Water lavel controller 230/ 415V AC., Four way for under ground & Over head tank operation.
1
-
-
Supplying & erecting PVC coated 5 mm dia Brass Sensor/ electrode duly wired with nut & bolts complete
4
-
-
Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25KW/ 3 HP with discharge 4.9/9.2 Litres per second (LPS) for head of 10/26 m and 65 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP
2
-
-
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included)(for pumps).
13
-
-
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG
2
-
-
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes
boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode 3 metres length electrode.
26
-
-
Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.
26
-
-
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
478
-
-
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
52
-
-
SITC of Electric Traction Passenger Lift with
• Rated capacity :- 8 Passenger/544Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MR/MRL
• Rated speed :- 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames
• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor
• Clear Car size of ......mm wide x ......mm deep x ......mm high
• LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator
around button with CPI, Lift car arrival & next travel direction
audio-visual indication at all landings
• Lift controller based on microprocessor/ PLC with VVVF Drive
having closed loop control system, with IBMS compatible having
necessary port, control panel duly wired with proper size &
strength copper wire for power & control circuit, with provision
for addition of floor/control card & allied accessories control
panel having enclosure of 1.5mm CRCA sheet with powder
coating with IP54 Protection class
• ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire Landing,
• CCTV surveillance system comprises of 2nos minimum 2.0MP
FHD IP based vandal proof Dome camera in lift car & in
LMR/inside lift shaft top aimed on Lift machinery & controller
with NVR kept in LMR/FCC with HDR data backup for 60
days with 18" FHD TV monitor, to be kept in FCC/LMR as
directed by Engineer In Charge.
• Lift Machine of Gearless PMSM of suitable kW with Traction
pulley, OSG, electromagnetic brakes, entire assembly mounted
on adequate size girders duly fixed on LMR floor/ shaft walls
complete with main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength
• Other mechanical parts such as 'T' section adequate size guide
rails for car & counter weight with brackets fasteners, counter
weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary
steel work
• Minor civil work for alteration if any and erection of door frames
and accessories, erection buffers, erection of lift machinery,
adequate size core cuts if required & scaffolding for erecting
guide rails fixing of girders for mounting lift machine etc.
complete as per specification no. LFT.
• Lift shaft available having clear size of .190mm wide x175mm deep.
2
-
-
For Lift travelling up to six floors at a speed of 1.0 mps, add as below; For Lift having 700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete
1
-
-
Supplying, installing, testing and commissioning of 11 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RTONG
2
-
-
Add per kWp for above 11 kWp upto 100 kWp
power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RTONG
22
-
-
Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having ISEER minimum 4.50 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. specification no.APAC/SAC
39
-
-
M. S. Galvanished Stand post type fire hydrants consisting of 80 mm ND stand pipe ISI marked as per IS: 1239 Class "C" single headed S S ISI marked oblique pattern fire hydrant valves with 65 mm instantaneous female connection, S S cap and S S. chain, as per IS 5290 and all accessories
5
-
-
Weather proof hose cabinet of size 750 x 600 x 250 mm fabricated from M. S. Angle iron sections and 16g M. S. Sheet with full glass door and locking arrangement, suitable to accommodate 2 Nos. 15 M long hoses and 1 No. branch pipe and nozzles. The cabinet shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and shall be suitably mounted on a raised masonry platform a required.
5
-
-
Single headed, S S ISI marked oblique pattern hydrant landing valves with 80 mm dia. flanged inlets and 65 mm dia. instantaneous type female outlets complete with SS cap and SS. chain, twist release type lug and all accessories as per IS: 5290
5
-
-
Non-Percolating fungus resistant flexible hose (RRL - Type A) ISI marked (IS: 636 (1988)) 63 mm dia. 2 x 15 M long complete with instantaneous type gun metal 63 mm dia. ISI marked make and female coupling (IS903) bound and riveted to hose pipes with copper rivets and 1.5 mm copper wire.
5
-
-
Indoor type hose cabinet of size 750 x 600 x 250 mm, fabricated from M. S. Angle iron sections and 16 g M. S. Sheet with full glass door and locking arrangement, suitable to accommodate 2 Nos. 15 M long hoses and 1 No.branch pipe and nozzles. The cabinet shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and shall be suitably mounted on a raised masonry platform a required.
7
-
-
Indoor fire hydrant double leaf enclosure fabricated from 16 gauge M. S. Sheet with front glass 5 mm thick and locking arrangement suitable for a clear opening size of 900 mm width x 1200 mm height including all accessories and painting with 1 coat of synthetic enamel paint of approved make and shades
7
-
-
First - aid fire hose reel, wall mounting swinging type as per IS 884 complete with drum, bracket, stop valve and 20 mm dia. 1 x 30 M long high pressure rubber hose reel tubing as per IS: 444 with S S shut-off nozzle having 5 mm dia. orifice as per IS: 8090
7
-
-
Controlled percolating (C. P.) hose IS: 8423 (1994) 63 mm dia. 2 x 15 M long complete with instantaneous type gun metal ISI marked male and female coupling (IS903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire (Central Hose)
7
-
-
SS-65 mm dia. short branch pipes with 20 mm dia. nozzles, ISI marked.
7
-
-
Gun metal fire brigade service inlet connection consisting of 2 Nos. 65 mm dia. instantaneous type male coupling with built-in check valve and flanged outlet, weather proof cabinet made of 16 g M. S. Sheets with 4 mm thick openable glass frontage and locking arrangement complete with bolts, nuts and rubber insertions as required and as per IS: 904 - 1983
1
-
-
Siamence connection consisting of 4 Nos. gunmetal 65 mm dia. instantaneous type male adaptors fixed to a 150 mm dia. M. S. Flanged manifold complete with bolts, nuts and rubber insertions as required and as per IS 904 : 1983
1
-
-
Air cushion tank (air vessel) 250 mm dia. x 1.0 M high with dished top, made of minimum 6 mm thick M. S. Pipe/ plate complete with 20 mm dia., stop valve pressure gauge with brass stop cock, nipple, tees elbows, and all accessories as required.
1
-
-
Mild steel galvanised "C" class pipes (IS 1239 Part "I") including cutting, screwing, welding etc providing all fittings such as bends, reducers, flanges, supporting with G. I. clamps, hangers, etc including cutting holes and chases in brick or RCC walls / slabs and making good the same to the approval of Architect / Consultants, complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and fire red colour for all internal hydrant system piping.Complete with test pressure are of 300psi.
-
-
-
200 mm dia.
20
-
-
150 mm dia.
63
-
-
100 mm dia.
10
-
-
50 mm dia.
35
-
-
Mild Steel black pipe (IS1239 Part - 1 Class "C" including cutting, screwing, welding etc. complete with fittings viz. tees, elbows, bends, flanges, reducers etc including excavations (upto 1.5 m deep) p:c:c 1:2:4 thrust blocks, back - filling with excavated earth, removal of surplus soil and providing anti-corrosive treatment (coating and wrapping) as per IS: 10221 complete as required for all external hydrant system piping
-
-
-
150 mm dia.
160
-
-
100 mm dia.
10
-
-
Supply and Installation of Cast iron butterfly valve of PN 16.0 rating conforming to IS 13095 complete with rubber insertion nuts, bolts and washers etc of following sizes:
-
-
-
200 mm dia.
2
-
-
150 mm dia.
11
-
-
100 mm dia.
5
-
-
Supply, installation, testing and commissioning of C.I. Flanged "Y" strainer conforming to IS including jointing all accessories such as gaskets, nuts, bolts, washers etc complete and as directed. 200 mm dia.
2
-
-
Supplying, Installation , Testing , Commissioning of Cast iron ISI marked non-return valve complete with rubber 'insertion, nuts, bolts and washers etc (IS: 5312) of following sizes
-
-
-
150 mm dia.
5
-
-
80 mm dia.
1
-
-
Supply and Installation of automatic air vent screwed type of following size 20 mm dia.
1
-
-
Providing & fixing firemen's axe including required aceessories / fittings as directed and as specified
1
-
-
15 mm dia. quartzoid bulb type G. M pendent sprinkler head set to operate at 68 Deg C (rate in rise) and as per IS 9972
321
-
-
Mild Steel galvanised pipe (IS:1239) part I heavy class including cutting, welding etc providing all fittings viz. flanges, bends tees, elbows, reducers, supporting with G. I. clamps, hangers etc. including cutting holes and chases in brick or RCC wall / slabs and making good the same to the Approval of Architect / consultant, complete inducing painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and fire colour.
-
-
-
150 mm dia.
5
-
-
100 mm dia.
21
-
-
80 mm dia.
75
-
-
65 mm dia.
87
-
-
50 mm dia.
127
-
-
40 mm dia.
127
-
-
32 mm dia.
142
-
-
25 mm dia.
624
-
-
SS screwed pattern automatic air vent valve with GM. Gate/ball valve (Class 1) of approved make & following size 20 mm dia.
1
-
-
Sprinkler test connection consisting of 40mmd dia SS gate/ball valve (Sight glass, union, drain valve etc. GI pipe with all required GI fittings as per drawing and as directed.
1
-
-
SITC of Water flow detector switch 2 SPDT contacts suitably rated, designed for a pressure of PN 16.0 & compatible and including insulation valves as required and of the following pipe sizes :
-
-
-
100 mm NB
5
-
-
80 mm NB
1
-
-
65 mm NB
1
-
-
SITC of Tamper switch with butterfly/ball valve, with necessary control wiring upto FA panel 2 SPDT contacts suitably rated, designed for a pressure of PN 16.0 & compatible and including insulation valves as required and of the following pipe sizes :
-
-
-
100 mm NB
5
-
-
80 mm NB
1
-
-
65 mm NB
1
-
-
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz) with appropriate supply cables connected to nearest electrical connection, 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel.-Ground Floor
1
-
-
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
1
-
-
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
1
-
-
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal (SMOKE) detector complete with mounting base complete as required.
7
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
7
-
-
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
7
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
7
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Cable Two pair, 2-core, 1.5 sqmm
2445
-
-
Electric motor driven fire hydrant+sprinkler system pumping sets suitable or automatic 'operation consisting of the following: Horizontal, centrifugal, end suction fire pumps (1W) having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2400LPM against a total head of 65 M complete with necessary pressure gauge & pressure switch on the delivery side including bypass arrangement as required for periodical testing of the working of the pumping sets also with nrv,ystrainer & valves complete in all respects. Common bed plate for mounting the pumps and motor, fabricated of suitable M.S. Channel as per manufacturer's recommendations. Suitable RCC foundations as per manufacturer's design and 6 Nos., antivibration heavy duty mounting pads.
1
-
-
Electric motor driven automatic pressurisation (Jockey pump) consisting of folloing: VT fire Jockey pumps (1w) of capacity 180 LPM against the total head of 75 M having cast iron body, bronze impeller, stainless steel shaft & complete with necessary pressure guage ,pressure switch including bypass arrangement as required for periodical testing of the working of the pumping sets also with nrv,ystrainer & valves complete in all respects. Squirrel cage induction motor totally enclosed fan cooled type suitable for 400 / 440 volts (+5%) 3 phase, 50 HZ, A.C. supply of suitable capacity for the above mentioned pumps with synchronous speed of 1450 RPM confirming to IS:325 and duly coupled with above pumps with flexible coupling including earthing as per relevant Indian Standard and specifications. Common bed plate for mounting the pumps and motor, fabricated of suitable M.S. Channel as per manufacturer's recommendations. 'Suitable RCC foundations as per manufacturer's design and 4 Nos. antivibration heavy duty mounting pads.
1
-
-
Cubical type floor mounted main fire pump control panel fabricated from 16 G M.S. sheets duly painted with stove enameled finish off approved shade suitable for the fire / jockey pumps and complete with incoming and outgoing switchgear, bus bars, starters, indicating lamps, volt meter, ammeter and all inter connecting power and pressure switch control cabling extra from plate and as directed. INCOMING One - 250 Amp. TPN SFU, One Set - Indicating Lamps ,One Set - Ammeter & Volt meter with selector switch BUS - BARS 250 A -TPN Bus bars (aluminum), OUT - GOINGS 2No- 100 amp. TPN SFU (main hydrant pump),1No- 100amp. TPN SFU (main sprinkler pump), 2No- 63 amp. TPN SFU (jockey pump)and 1No- 63 amp. TPN SFU (Boosterpump), Two - Fully automatic DOL starter suitable for hydrant & sprinkler pump motors with over 'load relay, push button and auto / manual selector switch, one - Fully automatic DOL starter suitable for jockey pump motors with over load relay, push button and auto / manual selector switch Neon indicating lamps, one for each outgoing, All inter connecting power and control wires / cable of suitable size with the panel and from panel to motors, pressure switches, level switches etc. including brass glands and earthing as per specification.
1
-
-
Diesel Engine driven fire system pumping set suitable for automatic operation consists of the following. DIESEL DRIVEN VT PUMP having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2400 LPM against a total head of 75M complete with necessary strainers and sluice valves on suction side and C. I. non - return & sluice valves, pressure gauge & pressure switch with G. M stop valve etc. on the delivery side including bypass arrangement (with G.M. stop valve and G.I. 'C' class pipes) for periodical testing of the working of the pumping sets. Radiator cooled 4 stroke diesel engine of suitable rating for the above pump with engine speed of 1500 RPM duly coupled with the above pump including standard accessories exhaust piping with silence chimney and fuel oil tank as required, with suitable engine control panel. Common bed plate for mounting the pumps and engine, fabricated of suitable M.S. Channel as per manufacturer's recommendations. Suitable RCC foundations as per manufacturer's design and 6 Nos., antivibration heavy duty mounting pads.
1
-
-
ISI marked (IS:13849) portable fire extinguishers, ABC dry powder type of capacity 5 Kg with pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.
13
-
-
ISI marked (IS:13849) portable fire extinguishers, ABC dry powder type of capacity 10 Kg with pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.
2
-
-
4 Nos fire buckets & lts capacity each made out of 24g GI sheet with round bottom, painted with white synthetic enamel from inside and fire red from outside and lettered 'FIRE' in black complete with bucket stand etc. complete including initial fill of sand.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements