Goa State Urban Development Agency Tender
View complete overview of Goa GSUDA Tender
Costs
EMD
₹ 5,88,890Document Cost
₹ 6,000Tender Fee
₹ 4,000
Summary
Renovation And Restoration Of The Old Municpal Building Bearing Chalta No. 244,245 And 295 Of P. T Sheet No. 146 Of Mapusa City.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_GSUDA_4056_1Bid Award Id
ViewTender No
F.43/3/GSUDA/E-tender/33/240 dt 13/05/22Tender Authority
Goa State Urban Development Agency ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead b) Area beyond 3 sq.m.
46
-
-
Salvage Value of dismantled wood of roof ,frames, doors etc. Considering it as firewood.
63.49
-
-
Salvage Value of dismantled wood from roof , Considering it as good wood , can be reuse any where.
18.18
-
-
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm
958
-
-
Dismantling tiled roofing (Mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
711
-
-
Dismantling of false ceiling work (ground floor and first floor) of wooden planks 10mm thk nano or equivalent including stacking of serviceable material/unserviceable material including carting loading and unloading as desired by the Municipal council.
442
-
-
Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.
17
-
-
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
92
-
-
Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead.
22
-
-
Carting away of the debris away from the site including loading in to truck unloading upto 10 kms away from the site as per directions of the architect/ Engineer in-charge.
234
-
-
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area
1
-
-
Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : b) Beyond 60 cm and upto 120 cm grith
5
-
-
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (a) All kinds of soil
69
-
-
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
28
-
-
Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
11
-
-
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
25
-
-
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level
7
-
-
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in superstructure from floor I level upto floor V level.
14
-
-
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : (a) All works upto plinth level
14
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level
7
-
-
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, intels, bands, plain window sills, staircases upto floor five level
10
-
-
Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level.
28
-
-
Providing M-30 grade concrete by using 420kgs of cement per cu.m. of concrete instead of M-25 grade of B.M.C.
28
-
-
Centering & shuttering including Strutting, Propping & removal of forms for : i)Foundations, Footings, Bases for columns sq.m
24
-
-
Centering & shuttering including Strutting, Propping & removal of forms for :iii) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
49
-
-
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
6720
-
-
Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer‘s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth
60
-
-
Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer‘s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10 mm dia 200mm depth
30
-
-
Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer‘s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth
30
-
-
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.Second class Indian teak wood
7
-
-
Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminum butt hinges with necessary screws: Second class Indian teak wood
260
-
-
FRP (Fiber Reinforced Polymer) Frames withWood Finish
Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Specified Cross Section (b) 4” x 2”
49
-
-
Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter
Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos Shutter Thickness : a) 32mm
23
-
-
Providing and fixing louvers 50 mm wide in grooves in clerestory window frames excluding the cost of frames. (a) Second class Indian teak wood 12 mm thick
3
-
-
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. a)40 x 3 mm flat iron hold fast 40 cm long
608
-
-
Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete a)300 x 16 mm
31
-
-
Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete b)250 x 16 mm
9
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete250 x 10 mm
129
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete200x10mm
5
-
-
Providing and fixing bright finished brass handles with necessary screws etc complete a) 125 mm
387
-
-
Providing and fixing bright finished brass handles with necessary screws etc complete b) 100 mm
15
-
-
Providing and fixing bright finished brass door latch with necessary screws etc completea) 300x 16 x 5 mm
129
-
-
Providing and fixing bright finished brass door latch with necessary screws etc complete b) 250 x 16 x 5 mm
5
-
-
Providing and fixing bright finished brass hard drawn hooks and eyes. c) 200 mm
49
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
40172
-
-
Providing and fixing in position 2nd class Indian teak wood hand rail 6.4 x 11.5 cm (4.5" x 2.5") fixed to 40 x 3 mm size M.S. flat welded to 10 mm mild steel square balusters of clear height 86 cm spaced at 15 cm c/c including making necessary hold fast fixtures embedded in staircase concrete to the depth of 20 cm as per detailed drawings
17
-
-
Providing and fixing C.I. grill of required pattern in wooden frames of Windows etc. with flats square or round bars with round headed bolts and nuts or by by screws.
2346
-
-
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. d) 900 x 900 mm light Shades
962
-
-
Precast plain Cement Tacktiles 32mm thk of required shade in floors, treads of steps and landing laid on 25mm bed of cement mortar 1:4(1cement:4coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing complete. (Basic Rate of Tiles 500-550 Per Sqm)
102
-
-
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. (Basic Rate of Tiles 800-850 Per Sqm)
32
-
-
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. (b) Wall Ceramic Glazed Tiles : 300 x 450 (Basic Rate of Tiles 300-350 Per Sqm)
140
-
-
Providing and laying 1st class mangalore tile roof covering with 25 x 50mm (1” x 2”) jamba wood or similar batten including nails etc. but excluding rafters.
710
-
-
Providing and laying ridge tiles laid dry & pointed with lime mortar 1: 2 (1 lime: 2 surkhi)
76
-
-
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
711
-
-
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
40
-
-
Providing and fixing decorative traditional first teak wood facia board of 200mm width and 25 mm thk finished 2 coats of primer and synthetic enamel paint as approved by the Architect or the Engineer in charge.
290
-
-
Providing and fixing in position 7.5mm thick Pre Primered, Self Embossed, Everest Cement planks of size 153mm x3000mm conforming to IS 14862 : 2000 Category Type B on G.I. frameork which includes providing and fixing of G.I perimeter channels of size 0.55mm thick( having one flange of 20mm and another flange of 30mm and web of 27mm) along the perimeter of the ceiling, screws fixed to the brick wall /RCC beam with the help of nylon sleeves and screws or PVC dash fasteners at 600mm c/c. Then suspending intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of size 25mm x 10mm x 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Then Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.55mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 450mm c/c. Single layer of 7.5mm of Cement Plank in 153mm width is fixed to the ceiling section with 25mm self drilling, self tapping countersunk fiber cement screws with two screws per support on plank with end joints champhered at edges to get visible V groove. Screw heads are to be finished with exterior jointing compound. Finally the planks are to be polished as per the specification and for external application the planks are to be coated with PU coat. Provide provisions for light fixtures etc. all complete as per the drawing and directions of engineer-in-charge.
754
-
-
6mm cement plaster to ceiling 1: 3 (1 cement : 3
fine sand)
507
-
-
12mm cement plaster 1:3 (1 cement : 3 fine sand)
2350
-
-
Providing and fixing 15mm Gypsum Wall Punning
1440
-
-
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
1040
-
-
Pointing on stone work, with cement mortar 1: 3 (1 cement: 3 fine sand) a Flush pointing sq.m
3390
-
-
Extra for plastering done on mouldings, cornices, or arch it raves including neat finish to line and level. (a) In one coat (On item no. 53 ie. 18mm plaster in two coats)
106
-
-
Providing water proofing treatment over thenew R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
78
-
-
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
507
-
-
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
1440
-
-
Providing and applying 3 or more coats of solvent based poly-urethane clear coating on clean, dry, free of oil, grease, dirt , fingerprint surfaces and finish sanded / polished external doors and windows teak wood members ,polished on external gypsum false ceiling and corridor railing to form protective coating with highest gloss . ( Moisture content of wood should be 6 to 8%) . The Contractor shall test the complete system for adhesion, compatibility and performance prior to full scale application.
264
-
-
Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
507
-
-
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
1040
-
-
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
2178
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
2178
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
1440
-
-
Rectification of existing reinforcement by below method. Step 1 First the steel reinforcement will be exposed by chipping off the plaster. The engineer will inspect the site and see if the size or the diameter of the reinforcement is changed ie lost it's size. In that case new reinforcement will have to be inserted either by welding or by tying with binding wire which will be at an additional cost. If the reinforcement is fine the existing bars will have to be cleaned with a wire brush. After cleaning of the reinforcement application of the chemical Rusticide will be done (with paint brush or cotton waste). After 24 hours the reinforcement will be cleaned with a brush and application of the chemical Polyalk Fixoprime will be applied in the ratio 1:1 (1-fixoprime;1-cement) at an interval of 6 hours (two coats). Step 2 On the next day application of polymer mortar will be done to cover the exposed rods using the chemical Polyalk EP in ratio 1:5:15(1-EP; 5-cement; 15-sand). Before applying the mortar, make the surface wet and make EP solution in the ratio 1:0.5 (1-EP; 0.5-cement). Apply the solution which helps in bonding of old and new. Immediately apply the EP mortar by hand (use gloves). Cure the surface after 24 hours, 3 times a day, for one day. finishing is done with normal plaster in the ratio 1:4 (1-cement; 4-sand). Cure the surface for a minimum of four days.
350
-
-
Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. a)Long pan pattern W. C. Pan
3
-
-
Proving and fixing white vitreous china (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ Wall Hook with N.R.V (Back Flow Preventer) wall flanges, Angular . including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - Single piece-WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size:380x660x765 mm, P Trap-300mm
5
-
-
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
7
-
-
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
7
-
-
Providing and fixing toilet paper holder : a. C.P. Brass
4
-
-
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (b) 600 x 20 mm size
8
-
-
Providing and fixing P.V.C. connection pipe with
brass unions 15 mm nominal bore: (c) 45 cm (18”) length .
7
-
-
Providing and fixing one white viterous oval shaped wash basin (approved make and brand) of 485x370 mm placed fixed at the top of granite / marble slab including cutting as per the shape of wash basins to the granite / marble slab so as to fix / place oval shaped with all accesories and making good. including Providing and fixing brass body nickle chrome plated pillar cock for wash basin compete etc complete.As per drawing and the direction of Engineer (Tap description as per GSR item no. 15772)
6
-
-
Providing and fixing Urinal (Jaguar/Cera /Hindware make) of size355x340x535mm (Cat No. URS-WHT-13261) with requiredUrinal Valve Auto Closing System with Built-in Control Cock & Wall Flange and Concealed Stop with operating lever , complete as per direction of Engineer in Charge
8
-
-
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
10
-
-
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws a)Glass container
4
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a) 15 mm nominal bore
2
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. c) 25 mm nominal bore
2
-
-
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). e) 40 mm nominal bore
100
-
-
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
1
-
-
Providing and placing on terrace roof of floor two (1st floor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.1000ltrs capacity
2
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :b) 150 x 100 mm size –P or S type
15
-
-
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: a)100mm dia
210
-
-
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: b) 150mm dia
60
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a)Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (Weight of cover 23 kg. )
10
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a)75MM
27
-
-
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: b)110MM
60
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a)100 mm dia
30
-
-
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b)75 mm dia
30
-
-
Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, with door :a) 110 mm dia
16
-
-
Providing & fixing (4’) 100 mm SS grating for nahni trap.(COCKROACH TRAP SQUARE)
12
-
-
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :a)110 mm dia
12
-
-
Providing and fixing R.P.V.C. vent cowl: a)110 mm dia
2
-
-
Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete :(b) 150mm
35
-
-
Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone, aggregate 40 mm nominal size) alround S.W. pipes including bed concrete 15 cm thick as per standard design : (b)150 mm diameter.
35
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with grade M 25 mix design with coarse sand and graded granitic or basaltic stone aggregate as per mix design requirements foundation concrete M 25 mix design with coarse sand graded granitic or basaltic stone aggregate as per mix design requirements inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)
4
-
-
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with grade M 25 mix design with coarse sand and graded granitic or basaltic stone aggregate as per mix design requirements foundation concrete M 25 mix design with coarse sand graded granitic or basaltic stone aggregate as per mix design requirements inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
4
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :b) 150 x 100 mm size –P or S type
6
-
-
Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: (a) For pipe 100 to 150 mm dia
4
-
-
Supply at site of work well decayed farmyard manure, from any available source approved by the engineer-in charge including screening and stacking as per MORTH Specification 308.2
6
-
-
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
14
-
-
a) Planting Flowering Plants and Shrubs
52.4
-
-
Maintenance of Flowering Plants and Shrubs for one Year
52.4
-
-
Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)
53
-
-
1) Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. (Cost of “doob” grass not included ). b) In rows 7.5 cm apart in either direction.
1
-
-
Maintenance of Hedge for one year
53
-
-
Supplying and Placing in position Three Seater sofa of Min size: 1800mm (L) x 750mm (W) x 800mm (H) of approved make, having solid frame structure made with pneumatic nails supported by ply wood, inner frame made with kiln chemical treated approved wood. Back rest to have a layer of approved make polyester of 180 GSM over the foam seats to avoid wrinkle lace and to provide soft feel on upholstery seating cushion to have 75mm elastic webbing of 350GSM used on the frame with diagonal pattern to distribute stress evenly. Upholstery cover made with good quality Leatherite stitched with Nylon bonded thread providing lasting strength. etc complete as directed by Engineer.
2
-
-
Supplying and placing in position armed revolving high back chair of approved make and colour with HR (high-resilience) foam and fabric seat and and mesh fabric back BIFMA (The Business & Institutional furniture manufactures association) compliant and having features like knee tilt syncronous mechanism with 4 position locking & anti shock feature.PU adjustable Armrests, nylon base with PU castors, neck rest. The back to be upholstered in mesh fabric. Rate shall include of all iron mongeries hardware, fittings, fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer
4
-
-
Supplying and placing in position an Ergonomic Chair designed for comfort, to provide lumbar support, they have 360 Degree swivel bases and seat height adjustment levers, high density moulded foam with ply backing, synchro tilt with height adjustment gas lift, five pronged chrome finish legs with caster wheels.
20
-
-
Supplying and placing in position armed medium back chair of approved make and colour with HR foam fabric upholstery seat and mesh fabric type back , BIFMA complaint , PU arms, metal powder coated base, complete with all necessary hardware .
79
-
-
Supplying and Placing in position banquet Chairs having foam upholstery of approved make and colour , understructure to be made out of SS tubes with smooth finish. Chairs should be stackable, light weight for easy handling etc.complete.
10
-
-
VISITOR CHAIR- Supplying and placing in position visitors chairs made of steel tubular frames with arms, mesh back rest, moulded foam cushion complete with all necessary hardware ..
20
-
-
L shaped tables (Size: 2.7 m + 2.35m):- Providing and fabricating L- shaped work table of size: 2700mm x 750mm x 750mm and 1600mm x 600mm x 750mm as per drawing, top made of 25mm thick BWP ply and other members made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 6.00 mm thick Veneer of approved make/ teak wood beading and french polish (min. 3 coats) to be applied on all internal surfaces complete with 12mm plain glass with edge polish provided on desk top, keyboard holder and all hardware like hinges, handles, telescopic channels, lock, magnets, cable managers etc. complete as per design and approval of the engg.
2
-
-
Executive Table : 1800 mm length x 750 mm height, 750 mm depth, 25mm Table top made of 25mm Marine ply with 1mm Matt colour laminate outside and white laminate inside supported on 18mm Marine ply Gable ends and Modesty panel.
8
-
-
Supplying and placing in position table of size 1500 x 600 x 750H. 25mm Table top made of Marine ply with 1mm Matt colour laminate outside and white laminate inside supported on 18mm Marine ply Gable ends and Modesty panel.
3
-
-
Conference Table:- Supplying and Installing in position conference table of approved make and size having seating capacity of 12 number with Table Top of shape option of either Cascade /Oval Shape,having table top made up with 25 mm thick prelam particle boardconforming to IS : 12823 Interior Grade with 2mm thick PVC edge banding and The understructure leg made up of prelam Particle boards / MDF board with 2mm thick PVC edge banding. Gable ends in 25mm thick and modesty panels of 18mm thk. or 25 mm thk. metal leg with polish finish,table top having concealed wire management to take care of basic wiring requirement and having pre-fitted side opening flip top box for providing power-data-voice switches on a modular switch plate.The details need to be as per the instructions of Architect or Engineer, etc. complete. (Size- 12 Seater, minimum 3000x1200x750mm)
1
-
-
MEETING TABLE: 3400 x 1200 x 750H. Table top made of 25mm thk Marine ply with 1mm MATT laminate, supported on 60 x 25mm MS powdercoated legs with provision to have electrical & Data wiring.
1
-
-
Providing and fixing of Gypsum Plain Board PL
Size: 12.5x1219x2438mm TE
100mm thick Gypserra™ stud partition with sound insulation of 49 Rw dB and Fire rating of 60 mins which includes double layer of tapered edge 12.5mm thick Gypboard® Plain (conforming to IS 2095 Part 1:2011, Certified board) of size 1219x2438mm is screw fixed to C-stud. 48x0.5mm Gypserra™ C-stud {Material-IS 513, Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 610mm c/c in 50x0.5mm Gypserra™ {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} floor and ceiling channel. Floor & Ceiling channel is anchored to the floor & True ceiling using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti X-GN20MX anchor fasteners at 600mm c/c in center line. 12.5mm thick Gypboard® Plain board strip of 50 mm width is placed between ceiling channel and RCC ceiling slab to improve fire performance of the system. A Gypserra™ noggin channel {Material-IS 513,Y/S-300 Mpa, Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be provided at the horizontal joints of the two boards. First layer of Gyproc® boards to be screw fixed with Gyproc® drywall screws of 25mm at minimum spacing of 600mm at centre and 600mm at periphery. Second layer to be screw fixed Gyproc® drywall screws of 35mm at minimum spacing of 300mm at centre and 300mm at periphery. 25mm glasswool slab of density 20kg/m³ shall be placed in metal framework. Glasswool holding clip should be used to hold Glasswool slab in its position. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape or fiber tape. The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant. All other detailing and specifications to be followed as per approved drawing of Gyproc.
Note :
Maximum reachable wall heights are based on L/240 at 200Pa.
For heights between 4200mm and 8000mm, Gypserra™ Deep Ceiling Channel should be used at head (Subject to deflection criteria).
Gyproc® Control Joint has to be provided at every 10 Mtr. c/c. along the length of wall.(Dry area Partition)
64
-
-
FILE RACK: Supplying and placing in position file rack of size 1000mm(L) 2100mm(H) x 400mm(D) using 18mm thk Marine ply with 1mm MATT laminate, Openable Shutters, shelves, Handles, Lock provided.
12
-
-
Providing and fabricating Overhead Shelf of size 2000 mm length x 600 mm height x 400 mm depth as per drawing, top made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 1.5 mm thicklaminate of approved make/ teak wood beading and french polish (min. 3 coats) to be applied on all internal surfaces complete with 12mm thick BWP ply and all hardware like hinges, handles, lock, magnets, etc. complete as per design and approval of the engg.
4
-
-
Dimension: 1.6 x 2.0 m
Supplying and installing in position at all level Compactor/Optimizer Storage System of approved manufacturer made of Rigid Knock Down construction made of 0.8mm thick CRCA (Cold rolled close annealed) steel conforming to IS: 513 Gr.D & powder coated with epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns.Each body block (SS/SL/TM) building consists of 1 Main unit & then Add-on units . Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body unit shall be bolted to undercarriage which rolls onto the channels, which, shall be firmly embedded to the ground.The under structure shall be welded frame made of HR (hot rolled) steel fixed on rails. The sliding track on the floor shall be supported by ramps on either side .Body units shall be bolted to undercarriage.Sliding movement of each unit shall be controlled on rotating circular handle ( Mechanical drive). The circular handle shall have a safety locking device in open position. The first unit shall be fixed to the wall and the rest of the units shall be twin units accesable from both side & the last unit shall have a openable shutter of the same body material.Centralized locking system to be provided with help of locking stiffener and manual locking of individual units. The item to be inclusive of all iron mongeris, hardware fitting fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. OPTIMIZER Unit size -(915mm W X 381mm D X 1980mm H).Double Face Module :- 1600MM X 2740MM H X 610 DMM
20
-
-
Providing and placing in position dustbins with lid of stainless steel of grade 304 of size 0.3 dia. X 0.3 with pedal etc. complete.
30
-
-
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).'(b) In rocky strata( Masonry chamber not included)
2
-
-
Extra for using salt and coke for GI or copper plate earth electrode as required( 240 Kgs of Coke and 5 Kgs of Salt)
2
-
-
Constructing a special masonry inspection chamber for earthing system as per the enclosed drawing and specifications. The square chamber( 860 x860mm) shall be constructed with brick masonry of 230 mm on a solid base of 75mm rubble packing and 75mm PCC. The floor level shall be finished with 50mm cement concrete. The inside wall of the chamber shall be plastered with 12mm plaster finish. A removable CI/RCC cover of size 400x 400mm on a angle box frame of 35x35x5mm shall be provided with locking arrangements/ lifting lugs. The scope of work includes all material labour etc complete as required.
2
-
-
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
60
-
-
Supply of 3 1/2 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size.'(1) 3 1/2 Core 25 sq.mm
50
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 125sqmm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over them sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In rocky soil
50
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat B Modular Accessories
155
-
-
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
35
-
-
Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
50
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required'(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
350
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required'(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
230
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit)
160
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.'(l) 4 x 16 sq.mm + 2 x 16 sq.mm earthwire (40mm Conduit)
60
-
-
'Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(a) 20 mm
150
-
-
'Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(b) 25 mm
60
-
-
Design , supply ,installation testing and commissioning of Main LT panel ,floo/wallr mounted , single front ,fully compartmentalised with cable entry at top/ bottom, all mccbs with rotary handles and 25KA with thermal magnetic releases etc suitable for cable size 31/2Cx50sqmm AYFY as required with with danger plates of approved design on front, two earthing terminals for 50x6mm GI strip, fabricated with 2mm CRCA sheets. All sheet steel work shall undergo a process of degreasing, pickling in acid, cold-rinsing, phosphating, passivating and then sprayed with a high corrosive resistant primer. The finishing treatment shall be by application of two coats of synthetic enamel paint or powder coating with 'Incomer 100A TP MCB with meter box, Mains Incomer 100A TP MCCB with indication lampset, '1 sets of digital multifunction meter with Amps, Volts, Kwh, Hz,PF etc with scada connectivity with necessary cts and suitable RS485/232 port, '1 set of 200A 4P , 25KA bus bars, Outgoings, '7 nos 60A TPN MCB, 'Main LT Panel
1
-
-
Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" '(a) Cat A
24
-
-
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)'(d) 4 way (8+12), double door, Vertical type, Cat B
1
-
-
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)'(e) 8 way (8+24), double door, Vertical type, Cat B
3
-
-
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)'(f) 12 way (8+36), double door, Vertical type, Cat B
2
-
-
Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required"'(a) 5 A to 32 A, Cat A
84
-
-
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(f) SP, Cat B
24
-
-
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(i) TP, Cat B
4
-
-
'Supplying and fixing 50 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(i) TP, Cat B
4
-
-
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(i) TP, Cat B
4
-
-
Supplying and erecting corridor/Passage light fitting (2 feet) including 18W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board.(2-1-20)
13
-
-
Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.(2-1-9)
37
-
-
Supplying and erecting Recess mounted 20W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)(2-1-19)
10
-
-
Supplying and erecting rectangular shaped CRCA /die-cast aluminium powder coated housing LED panel (slim edge-lit) 300x1200mm of suitable for 36 to 40 W with provision for plane front frame with translucent cover fixed to the housing complete.
29
-
-
Supplying and erecting 1 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.
42
-
-
Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.
2
-
-
Supplying and erecting double suspension pipe rod of 16 gauge 20mm.dia H.G. conduit duly threaded and painted with two coats of enamel paint for erection of fluo. tube light fitting with necessary check nuts and shielded copper flexible wire three core of 1 sq mm for connecting leads (for measurements half of the actual length both pipes used)
80
-
-
Supplying and erecting adaptor for lamp holder 230 V.A.C.
supply.
10
-
-
Supplying & erecting 10-12W, 230V integral type LED Lamp
suitable for B-22/E-27 base.
52
-
-
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.(2-12-14)
10
-
-
Supplying and erecting Five Star Rated Energy Saving Ceiling Fan230 V A.C. 50 cycles 1200 mm complete erected in position as per specifcation no.FG-FN/CF.(2-12-21)
32
-
-
Chasing the ceiling to erect a fan hook including making good the plaster, neeru and paint complete as required( hook not included).
16
-
-
Supply and erecting 'J' type Mild Steel fan hook fabricated out of 35 X 6 mm flat strip suitable for rafters complete with coach screws etc as required.(a) For 4 inches rafter size
16
-
-
Supplying and erecting "B" grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-13-6)
30
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as requiredCat B
32
-
-
Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.
2
-
-
Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
10
-
-
Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC
24
-
-
Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.
58
-
-
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) Cat 6 +
270
-
-
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A
15
-
-
Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
30
-
-
Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL
1
-
-
Supplying and fixing 24 port Patch Panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
1
-
-
Supplying, fixing, and configuring managed gigabit switches 48 Ports 10/100/1000Mbps + 4 SFP Ports complete.
1
-
-
Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements