Goa Industrial Development Corporation Tender

All works upto plinth level

Providing & applying Rustonil (P.no.569) or equivalent for removing rust & phospating of steel structures or steel reinforcement in RCC to be applied in 1 coat it necessary then 2nd coat) before application of bonding agent.

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 200Min., four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI410, spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A) Nominal Diameter in mm

80 mm

100 mm

Supplying at store/ site of work including railway freight, carting, loading, unloading, stacking etc. galvanized mild steel continuous weld tubes conforming to IS 1239 (part I) 1975, with latest amendments screwed at both the ends as per IS : 554 - pipe threads, one and fitted with socket other end with plastic protection ring at random lengths 4 - 7 meters Class C Nominal Diameter in mm

80 mm

100 mm