Electricity Department Tender
View complete overview of Goa Electricity Department Tender
Costs
EMD
₹ 82,627Document Cost
₹ 500Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ED_10607_1Bid Award Id
ViewTender No
Tender-39/Div-V (2023-24)Tender Authority
Electricity Department ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
19
159334
8386
... More
Supply of RCC pole 7.5 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
4
24368
6092
... More
Supply of 11 KV rated voltange GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS: 9921-Part 1 to V as amended up to date and detailed specification eclosed herewith. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufacturer of the insulators and have minimum 320 mm creepage distance and AB switchs contacts shall be of copper/ copper alloy. The AB switch shall be of following current rating: 200 A
1
23535
23535
... More
Supply of 11 KV , 200 A Horn gap fuse unit (Set of three) shall be as per enclosed drg No. CEE/E-786. Revision 3 and detailed specifications enclosed herewith.
1
10450
10450
... More
Supply of 9 KV, 5 KA nominal discharge current metal oxide gapless distribution class Lightning arrestor conforming to IEC-600994-4 and IS: 3070 part 3 1993 as amended upto date suitable for 11 KV 50 HZ effectively earthed neutral system with necessary mounting arragements and connector suitable to connect ASCR conductor upto overall diameter 12.30 mm
3
9099
3033
... More
Supply of HDGI structure material \\. Each trasformer centre DP consist of HDGI structure material as follows: a) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for incoming line & installation of disc insulators b) GI channel ISMC75x40x7.3mm 2.75mtrs long 2 pieces for GOAB switch c) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for HG fuses d) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for installation of lightening arrestor e) GI channel ISMC 100x50x7.3mm 2.75 mtrs long 2 pieces for installation of Trasformer f) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for side support of trasformer g) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 4 pieces for installation of any other items h) GI channel ISMC 100x40x7.3mm 0.52 mtrs long 2 pieces for installation of Transformer base channel
260
43940
169
... More
Supply of 100KVA 11/0.433KV 3 phase outdoor type ,oil immeresed Aluminium wound level II distribution trasnfromers
1
247700
247700
... More
Supply of LT/11KV Stay set complete 11Mts long RCC pole
2
9227
4613.57
... More
Supply of LT/11KV Stay set complete 9 Mts long RCC pole
16
69864
4366.54
... More
Supply of LT/11KV Stay set complete 7.5 Mts long RCC pole
7
28476
4068.1
... More
Supply of HDGI Top Insulator fitting Cross arm ISMC channel 75 x 40 mm, 0.7 mtr with nut bolts long for 11 mts long RCC pole
7
9269
1324.2
... More
Supply of HDG 11 KV 'V' Shape cross arm of channel ISMC 75 x 40 x 7.3 mm. with HDG Clamp & HDG nut bolts etc. for 11 Mtr. long RCC Pole as pet drg no. CEE/E - 408-R1
5
9871
1974.2
... More
Supply of HDG cut point crosss arm channel ISMC 75 X40 X 6mm of 1.3 mts long with clamps and nuts & bolts for 11 mts RCC pole
1
2464
2464.2
... More
Supply of 1KV Guard Cross arm 1.5Mts long with clamps & nut bolt for 11mtr RCC pole
4
10804
2701.2
... More
Supply of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 11mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
21
33898
1614.2
... More
Supply of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 11 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
12
12890
1074.2
... More
Supply of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
31
45452
1466.2
... More
Supply of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
21
19450
926.2
... More
Supply of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
8305
1384.2
... More
Supply of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
4221
844.2
... More
Supply of 11KV Disc Insulators ball and socket type, A porcelain brown glazed duly cemented at factory with MCI socket cap, forged steel ball pin and supplied with Phosphor bronze "W" split pin as per IS 731-1971 as amended upto date. Minimum failing load 70 KN Pin ball diameter 16 mm. Minimum Creepage distance 320 mm with 2 bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 16 mm pin, failing load of 70 KN and suitable for ACSR conductor of size upto 18 mm diameter. The metal parts shall be as per drg No CC/E-482-Rev-2 Benclosed and conform to IS-2486 part 1-1993, 2486 Part-2-1989 as amended upto date.
6
17316
2886
... More
Supply of 11 KV brown glazed porcelain Pin Insulator with minimum failing load of 5 KN and the minimum creepage distance of 320mm conforming to IS 731-1971 as amended upto date. And forged GI pin conforming to IS 2486 part 1 & 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS 731/71 as amended upto date. GI pin shall conform to reference S-165 N fig 5 of IS 2486/(part-II)/74 as amended upto date. Dimension X in said fig shall be 150mm (screwed 100mm). Pin shall be supplied along with one suitable GI hexagonal nut and GI spring washer. Minimum failing load of pin shall be 10 KN.
12
8316
693
... More
Supply of LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
230
85560
372
... More
Supply of L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
150
39450
263
... More
Supply of ACSR Conductor Hard drawn stranded aluminium conductor with galvanized steel wire reinforced conforming to IS: 398(PartII-96) amended upto date of the following sizes. WEASEL 6/1/2.59 (nominal aluminium area 30 Sq.mm.) (139 amp max at 45 °C) for line
0.42
14031
33409
... More
Supply of Earthing complete with chamber as per drg/ No. CEE/E-830. Each earthing should consist as follows a) 40 mm. Dia 2.5 mtr long, class B GI pipe 1 No. b)HDGI nut bolts, clamps 1 set, c)Brick masonary-0.108 Cu.mts d) PVC pipe 50mm dia- 0.2mtr e) Salt-20 Kgs f) Charcoal-20 Kgs g) Excavation-0.864 Cu. Mtr h) refilling-0.74 Cu.mtr as per drg. No.CEE/E-830.
6
16380
2730
... More
Supply of XPLE insulated single core unarmoured cable 50 mm2 for DP earthing.
55
4565
83
... More
Supply of AA"ANT" conductor
9.33
448642
48086
... More
Supply of AA"GNAT" conductor
7.74
195767
25293
... More
Supply of MS Distribution box as per drg No. CEE/E-689 Revision No. 3 along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement
1
63140
63140
... More
Supply of XLPE 1.1KV Armored single core unarmoured cable 185 mm²
48
11760
245
... More
Supply of XLPE 1.1KV 3 & 1/2 XLPE Armoured cable 120 mm²
36
32868
913
... More
Supply of Enamelled danger boards 11000 Volts ,250mm x 200mmm as per drg no. CEE/E-490
2
496
248
... More
Supply of Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 185 Sq.mm.
8
624
78
... More
Supply of Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 120 Sq.mm.
9
486
54
... More
Supply of Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 95 Sq.mm.
3
120
40
... More
Supply of Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes50 Sq.mm.
45
990
22
... More
Supply of FRP Fencing complete with Gate as epr specification for distribution transformer (size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5)Cu.m.x12nos Each ratio 1;3;6
1
76667
76667
... More
Supply of Painting of Pole Numbers
29
3025
104.33
... More
B) Estimate for Shifting of Pole in Ward No.IV Poirem i.e. 1.Shifting of pole with LT line from Prakash Majik house to Pandurang Majik house at Arunewada . 2.Shifting of pole with LT line from Shankar Majik house at Arunewada ,Poirem in the jurdisction of Section office Parye .
-
-
-
... More
Supply of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
10
83860
8386
... More
Supply of LT/11KV Stay set complete 9 Mts long RCC pole
7
30565
4366.54
... More
Supply of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
8797
1466.2
... More
Supply of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
1
926
926.2
... More
Supply of HDG L.T. 4 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
21898
3649.79
... More
Supply of HDG L.T. 2 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
9842
1968.53
... More
Supply of LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
42
15624
372
... More
Supply of L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
21
5523
263
... More
Supply of AA"ANT" conductor
0.14
6732
48086
... More
Supply of AA"GNAT" conductor
0.13
3288
25293
... More
Painting of Pole Numbers
10
1043
104.33
... More
C) Estimate for Shifting of Pole in Ward No.V i.e. Poirem 1.Shifting of pole near the house of Keshav Sawant & Suresh Arjun Rane at Sawantwada,Poirem 2.Shifting of pole near the house of Umesh Rama Rane At Sawantwada,Poirem 3. Shifting of pole near the house of Zipaji Shablo Mhalshekar at Mhalshekarwada,Poirem in the jurdisction of Section office Parye .
-
-
-
... More
Supply of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
15
125790
8386
... More
Supply of LT/11KV Stay set complete 9 Mts long RCC pole
10
43665
4366.54
... More
Supply of HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
14
20526
1466.2
... More
Supply of HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
12
11114
926.2
... More
Supply of HDG L.T. 4 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
18248
3649.79
... More
Supply of HDG L.T. 2 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
9842
1968.53
... More
Supply of LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
78
29016
372
... More
Supply of L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
38
9994
263
... More
Supply of AA"ANT" conductor
0.28
13464
48086
... More
Supply of AA"GNAT" conductor
0.41
10370
25293
... More
Painting of Pole Numbers
15
1564
104.33
... More
D) Estimate for Shifting of poles along with 3 phase 6 wire LT line in ward No.IV at Kolamwada-Karapur under Village Panchayat Sarvan -Karapur as per request from Village Panchayat Karapur -Sarvan Vide Ref No: VP/KS/2022-2023/4792 Dated 13/01/2023 & the NOTE received from Hon'ble MLA, Mayem Constituency, Goa Legislative Assembly vide ref No.26/Shift-LT line & Poles /VP KS/MLA-MC/23-24 Dated 13/02/2023 , under S.O. Karapur , Sub Division II( R), Sankhalim-Goa
-
-
-
... More
Supply of 9 mtr RCC pole
10
83860
8386
... More
Supply of 7.5 mtr RCC pole for Stud pole
1
6092
6092
... More
Supply of L.A Stay clamps for 7.5 mtr for Stud pole
2
622
311
... More
Supply of Nut & bolt 100X16mm for Stud pole
0.8
182
228
... More
Supply of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 9 mtr RCC pole
9
13195
1466.2
... More
Supply of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 9 mtr RCC pole
9
8335
926.2
... More
Supply of 4 pin X arm channel side bracket with clamps & nut bolt for 9 mtr RCC pole
5
18248
3649.79
... More
Supply of 2pin X arm channel side bracket with clamps & nut bolt for 9 mtr RCC pole
5
11157
2231.53
... More
Supply of L.T. pin insulators
50
6800
136
... More
Supply of G.I. pin for LT pin insulator
50
6350
127
... More
Supply of L.T. Shackle insulators
40
6680
167
... More
Supply of Metal Parts for LT Shackel Insulator
40
8200
205
... More
Supply of A.A. ' ANT conductor
1.58
75975
48086
... More
Supply of A.A. ' GNAT' conductor
1.71
43251
25293
... More
Supply of stay set 9mtr
7
30565
4366.54
... More
Numbering /Painting of LT poles
10
1043
104.3
... More
E) Estimate for Shifting of poles with 3 phase 5 wire LT line at Survey no.47/0 at Margadhat Sarvan under Village Panchayat Sarvan -Karapur as per request from Village Panchayat Karapur -Sarvan Vide Ref No: VP/KS/BICH/2022-2023/4484 Dated 09/12/2022 & the NOTE received from Hon'ble MLA, MayemConstituency, Goa Legislative Assembly vide ref No.40/Shift-Elect.pole/VP KS/MLA-MC/23-24 Dated 02/1/2023 , under S.O. Karapur , Sub Division II( R), Sankhalim-Goa
-
-
-
... More
Supply of 7.5 mtr RCC pole
14
85288
6092
... More
Supply of 4 pin X arm channel side bracket with clamps & nut bolt for 7.5 mtr RCC pole
4
13551
3387.79
... More
Supply of 2pin X arm channel side bracket with clamps & nut bolt for 7.5 mtr RCC pole
4
7363
1840.93
... More
Supply of A.A. ' ANT conductor
0.09
4327
48086
... More
Supply of A.A. ' GNAT' conductor
0.09
2276
25293
... More
Numbering /Painting of LT poles
14
1460
104.3
... More
Cost of Erection
-
-
-
... More
A) Estimate for Erection of new 100KVA Transformer Centre along with change of conductor to Cater the low voltage problem to Villagers & Agriculture Pumps at Mathwada ,Parye in ,Ward No.1 of Village Panchayat Poirem in the jusrdsciton of Section office Parye under S/D-II( R),Sankhalim-Goa
-
-
-
... More
Erection of RCC pole 11 mtr as per the drawing No.CEE/E-698 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
6
51600
8600
... More
Erection of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
19
83752
4408
... More
Erection of RCC pole 7.5 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
4
14756
3689
... More
Erection of 11 KV rated voltange GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS: 9921-Part 1 to V as amended up to date and detailed specification eclosed herewith. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufacturer of the insulators and have minimum 320 mm creepage distance and AB switchs contacts shall be of copper/ copper alloy. The AB switch shall be of following current rating: 200 A
1
3971
3971
... More
Erection of 11 KV , 200 A Horn gap fuse unit (Set of three) shall be as per enclosed drg No. CEE/E-786. Revision 3 and detailed specifications enclosed herewith.
1
3368
3368
... More
Erection of9 KV, 5 KA nominal discharge current metal oxide gapless distribution class Lightning arrestor conforming to IEC-600994-4 and IS: 3070 part 3 1993 as amended upto date suitable for 11 KV 50 HZ effectively earthed neutral system with necessary mounting arragements and connector suitable to connect ASCR conductor upto overall diameter 12.30 mm
3
522
174
... More
Erection of HDGI structure material \\. Each trasformer centre DP consist of HDGI structure material as follows: a) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for incoming line & installation of disc insulators b) GI channel ISMC75x40x7.3mm 2.75mtrs long 2 pieces for GOAB switch c) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for HG fuses d) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for installation of lightening arrestor e) GI channel ISMC 100x50x7.3mm 2.75 mtrs long 2 pieces for installation of Trasformer f) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 2 pieces for side support of trasformer g) GI channel ISMC 75x40x7.3mm 2.75 mtrs long 4 pieces for installation of any other items h) GI channel ISMC 100x40x7.3mm 0.52 mtrs long 2 pieces for installation of Transformer base channel
260
12220
47
... More
Erection of100KVA 11/0.433KV 3 phase outdoor type ,oil immeresed Aluminium wound level II distribution trasnfromers
1
11017
11017
... More
Erection of LT/11KV Stay set complete 11Mts long RCC pole
2
5072
2536.34
... More
Erection of LT/11KV Stay set complete 9 Mts long RCC pole
16
39454
2465.88
... More
Erection of LT/11KV Stay set complete 7.5 Mts long RCC pole
7
16826
2403.8
... More
Erection of HDGI Top Insulator fitting Cross arm ISMC channel 75 x 40 mm, 0.7 mtr with nut bolts long for 11 mts long RCC pole
7
2135
305
... More
Erection of HDG 11 KV 'V' Shape cross arm of channel ISMC 75 x 40 x 7.3 mm. with HDG Clamp & HDG nut bolts etc. for 11 Mtr. long RCC Pole as pet drg no. CEE/E - 408-R1
5
2075
415
... More
HDG cut point crosss arm channel ISMC 75 X40 X 6mm of 1.3 mts long with clamps and nuts & bolts for 11 mts RCC pole
1
569
569
... More
Supply & erection of 11KV Guard Cross arm 1.5Mts long with clamps & nut bolt for 11mtr RCC pole
4
2492
623
... More
HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 11mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
21
7098
338
... More
HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 11 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
12
3708
309
... More
HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
31
9858
318
... More
HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
21
6069
289
... More
HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
1830
305
... More
HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
1380
276
... More
11 Disc Insulators ball and socket type, A porcelain brown glazed duly cemented at factory with MCI socket cap, forged steel ball pin and supplied with Phosphor bronze "W" split pin as per IS 731-1971 as amended upto date. Minimum failing load 70 KN Pin ball diameter 16 mm. Minimum Creepage distance 320 mm with 2 bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 16 mm pin, failing load of 70 KN and suitable for ACSR conductor of size upto 18 mm diameter. The metal parts shall be as per drg No CC/E-482-Rev-2 Benclosed and conform to IS-2486 part 1-1993, 2486 Part-2-1989 as amended upto date.
6
2250
375
... More
11 KV brown glazed porcelain Pin Insulator with minimum failing load of 5 KN and the minimum creepage distance of 320mm conforming to IS 731-1971 as amended upto date. And forged GI pin conforming to IS 2486 part 1 & 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS 731/71 as amended upto date. GI pin shall conform to reference S-165 N fig 5 of IS 2486/(part-II)/74 as amended upto date. Dimension X in said fig shall be 150mm (screwed 100mm). Pin shall be supplied along with one suitable GI hexagonal nut and GI spring washer. Minimum failing load of pin shall be 10 KN.
12
1824
152
... More
LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
230
47840
208
... More
L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
150
25950
173
... More
ACSR Conductor Hard drawn stranded aluminium conductor with galvanized steel wire reinforced conforming to IS: 398(PartII-96) amended upto date of the following sizes. WEASEL 6/1/2.59 (nominal aluminium area 30 Sq.mm.) (139 amp max at 45 °C) for line
0.42
2986
7110
... More
Earthing complete with chamber as per drg/ No. CEE/E-830. Each earthing should consist as follows a) 40 mm. Dia 2.5 mtr long, class B GI pipe 1 No. b)HDGI nut bolts, clamps 1 set, c)Brick masonary-0.108 Cu.mts d) PVC pipe 50mm dia- 0.2mtr e) Salt-20 Kgs f) Charcoal-20 Kgs g) Excavation-0.864 Cu. Mtr h) refilling-0.74 Cu.mtr as per drg. No.CEE/E-830.
6
14664
2444
... More
XPLE insulated single core unarmoured cable 50 mm2 for DP earthing.
55
3080
56
... More
AA"ANT" conductor
9.33
61895
6634
... More
AA"GNAT" conductor
7.74
47856
6183
... More
MS Distribution box as per drg No. CEE/E-689 Revision No. 3 along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement
1
8795
8795
... More
XLPE 1.1KV Armored single core unarmoured cable 185 mm²
48
8832
184
... More
XLPE 1.1KV 3 & 1/2 XLPE Armoured cable 120 mm²
36
6336
176
... More
Enamelled danger boards 11000 Volts ,250mm x 200mmm as per drg no. CEE/E-490
2
114
57
... More
Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 185 Sq.mm.
8
760
95
... More
Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 120 Sq.mm.
9
792
88
... More
Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes 95 Sq.mm.
3
195
65
... More
Aluminium crimping Lugs shall conform to IS: 8309-1976 as amended upto date. Lugs shall be made of aluminium of grade IE of IS: 5082/1969 suitable for aluminium cable fo sizes50 Sq.mm.
45
2295
51
... More
FRP Fencing complete with Gate as epr specification for distribution transformer (size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5)Cu.m.x12nos Each ratio 1;3;6
1
35000
35000
... More
Cement concreting 1 : 2:4
2.5
13887
5555
... More
Removing of 9 Mts long RCC pole
2
4408
2204
... More
Removing of 7.5 Mts long RCC pole
22
40579
1844.5
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 11 mtr RCC pole
5
845
169
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 11 mtr RCC pole
5
772
154.5
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 9 mtr RCC pole
4
636
159
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 9 mtr RCC pole
4
578
144.5
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 7.5 mtr RCC pole
24
3660
152.5
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 7.5 mtr RCC pole
24
3312
138
... More
Removing of Pin insulator with GI pin
81
7006
86.5
... More
Removing of Shackle insulator with metal parts
76
7904
104
... More
Removing & Re-stringing of AA WEASEL Conductor
1.68
17917
10665
... More
Removing of AA ANT Conductor
6.14
20366
3317
... More
Removing of AA GNAT Conductor
4.62
14282
3091.5
... More
B) Estimate for Shifting of Pole in Ward No.IV Poirem i.e. 1.Shifting of pole with LT line from Prakash Majik house to Pandurang Majik house at Arunewada . 2.Shifting of pole with LT line from Shankar Majik house at Arunewada ,Poirem in the jurdisction of Section office Parye .
-
-
-
... More
Supply & Erection of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
10
44080
4408
... More
Supply & erection of LT/11KV Stay set complete 9 Mts long RCC pole
7
17261
2465.88
... More
HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
1908
318
... More
HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
1
289
289
... More
HDG L.T. 4 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
6
5310
885.1
... More
HDG L.T. 2 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
2345
469.08
... More
LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
42
8736
208
... More
L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
21
3633
173
... More
AA"ANT" conductor
0.14
928
6634
... More
AA"GNAT" conductor
0.13
803
6183
... More
Removing of 7.5 Mts long RCC pole
6
11067
1844.5
... More
Removing of 9 Mts long RCC pole
1
2204
2204
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 7.5 mtr RCC pole
10
1525
152.5
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 7.5 mtr RCC pole
3
414
138
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 9 mtr RCC pole
1
159
159
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 9 mtr RCC pole
1
144
144.5
... More
Removing of AA ANT Conductor
0.91
3018
3317
... More
Removing of AA GNAT Conductor
1.33
4111
3091.5
... More
Re-Stringing of AA ANT Conductor
0.91
6036
6634
... More
Re-stringing of AA GNAT Conductor
1.42
8779
6183
... More
Removing & Re-Stringing of AA ANT Conductor
0.04
398
9951
... More
Removing & Re-stringing of AA GNAT Conductor
0.13
1205
9274.5
... More
Removing of LT shackle insulator with metal parts
27
2808
104
... More
Remvoing of LT Pin insulator with GI pin
21
1816
86.5
... More
C) Estimate for Shifting of Pole in Ward No.V i.e. Poirem 1.Shifting of pole near the house of Keshav Sawant & Suresh Arjun Rane at Sawantwada,Poirem 2.Shifting of pole near the house of Umesh Rama Rane At Sawantwada,Poirem 3. Shifting of pole near the house of Zipaji Shablo Mhalshekar at Mhalshekarwada,Poirem in the jurdisction of Section office Parye .
-
-
-
... More
Supply & Erection of RCC pole 9 mtr as per the drawing No.CEE/E-724 REV-3 as per annexure confirming to IS 785-1998 as amended upto date. The component used for pole shall conform to following IS amended up to date. 1) Ordinary Port land cement 53 grade IS 12269 2) Aggregate IS 383-1970 3) Torsteel IS 1786-7985 4) MS bar IS 432 p 1 & 2-1982
15
66120
4408
... More
Supply & erection of LT/11KV Stay set complete 9 Mts long RCC pole
10
24658
2465.88
... More
HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
14
4452
318
... More
HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
12
3468
289
... More
HDG L.T. 4 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
4425
885.1
... More
HDG L.T. 2 pin cross arm Channel side bracket type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524
5
2345
469.08
... More
LT brown glazed shackle Insulator of size 100 mm x 115 mm conforming to fig No. 4 and type 2 fo IS: 1445/77 as amended upto date. Minimum failing load shall be 16 KN with GI hardware suitable for LT shackle insulator of size 100 x 115 mm conforming to type 2 fig 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall conform to fig 4 of IS: 7935-1975 as amended upto date comprise fo 2 GI strips, 2 GI bolts and 2 nuts with spring washers.
78
16224
208
... More
L.T. brown glazed porcelain pin insulators of size 100mmx70mm conforming to type 1 fig 1 of IS: 1445/1977 with amendment 2 of Feb 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5 KN with Forged GI pin conforming to IS 7935/1975 as amended upto date suitable for LT porcelain pin insulator type 1 conforming to fig 1 of IS: 1445/77 with amendment no 2 feb 1981, of size 100 x 70 mm. GI pin shall comprise of GI nut and spring washer and conform to fig No 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN
38
6574
173
... More
AA"ANT" conductor
0.28
1857
6634
... More
AA"GNAT" conductor
0.41
2535
6183
... More
Removing of 7.5 Mts long RCC pole
13
23978
1844.5
... More
Removing of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 7.5 mtr RCC pole
14
2135
152.5
... More
Removing of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 7.5 mtr RCC pole
12
1656
138
... More
Removing of AA ANT Conductor
1.79
5937
3317
... More
Removing of AA GNAT Conductor
1.87
5781
3091.5
... More
Re-Stringing of AA ANT Conductor
1.91
12670
6634
... More
Re-stringing of AA GNAT Conductor
1.43
8841
6183
... More
Removing & Re-Stringing of AA ANT Conductor
0.38
3781
9951
... More
Removing & Re-stringing of AA GNAT Conductor
0.38
3524
9274.5
... More
Removing of LT shackle insulator with metal parts
53
5512
104
... More
Remvoing of LT Pin insulator with GI pin
43
3719
86.5
... More
D) Estimate for Shifting of poles along with 3 phase 6 wire LT line in ward No.IV at Kolamwada-Karapur under Village Panchayat Sarvan -Karapur as per request from Village Panchayat Karapur -Sarvan Vide Ref No: VP/KS/2022-2023/4792 Dated 13/01/2023 & the NOTE received from Hon'ble MLA, Mayem Constituency, Goa Legislative Assembly vide ref No.26/Shift-LT line & Poles /VP KS/MLA-MC/23-24 Dated 13/02/2023 , under S.O. Karapur , Sub Division II( R), Sankhalim-Goa
-
-
-
... More
Supply & Erection of 9 mtr RCC pole
10
44080
4408
... More
Supply & Erection of 7.5 mtr RCC pole for Stud pole
1
3689
3689
... More
Supply & Erection of L.A Stay clamps for 7.5 mtr for Stud pole
2
138
69
... More
Supply & Erection Nut & bolt 100X16mm for Stud pole
0.8
24
30
... More
Supply & Erection of LT 4 pin cross arm of 75x40 channel with clamps & nut bolt for 9 mtr RCC pole
9
2862
318
... More
Supply & Erection of LT 2-pin cross arm of 75x40 channel with clamps & nut bolts for 9 mtr RCC pole
9
2601
289
... More
Supply & Erection of 4 pin X arm channel side bracket with clamps & nut bolt for 9 mtr RCC pole
5
4265
853.1
... More
Supply & Erection of 2pin X arm channel side bracket with clamps & nut bolt for 9 mtr RCC pole
5
2595
519.08
... More
Supply & Erection of L.T. pin insulators
50
4950
99
... More
Supply & Erection of G.I. pin for LT pin insulator
50
3700
74
... More
Supply & Erection of L.T. Shackle insulators
40
4160
104
... More
Supply & Erection of Metal Parts for LT Shackel Insulator
40
4160
104
... More
Supply & Erection of A.A. ' ANT conductor
1.58
10481
6634
... More
Supply & Erection of A.A. ' GNAT' conductor
1.71
10572
6183
... More
stay set 9mtr
7
17261
2465.88
... More
Removing of 7.5 mtr RCC pole
7
12911
1844.5
... More
Removing of 4 pin X arm with clamps & nut bolt for 7.5 mtr RCC pole
7
1067
152.5
... More
Removing of 2 pin X arm with clamps & nut bolt for 7.5 mtr RCC pole
7
966
138
... More
Removing of 4 pin X arm with clamps & nut bolt for 9 mtr RCC pole
2
318
159
... More
Removing of 2 pin X arm with clamps & nut bolt for 9 mtr RCC pole
2
289
144.5
... More
Removing of L.T. pin insulators
25
1237
49.5
... More
Removing of G.I. pin for LT pin insulator
25
925
37
... More
Removing of L.T. Shackle insulators
25
1300
52
... More
Removing of Metal Parts for LT Shackel Insulator
25
1300
52
... More
Removing of A.A. ' ANT conductor
1.08
3582
3317
... More
Removing of of A.A. ' GNAT' conductor
1.08
3338
3091.5
... More
E) Estimate for Shifting of poles with 3 phase 5 wire LT line at Survey no.47/0 at Margadhat Sarvan under Village Panchayat Sarvan -Karapur as per request from Village Panchayat Karapur -Sarvan Vide Ref No: VP/KS/BICH/2022-2023/4484 Dated 09/12/2022 & the NOTE received from Hon'ble MLA, MayemConstituency, Goa Legislative Assembly vide ref No.40/Shift-Elect.pole/VP KS/MLA-MC/23-24 Dated 02/1/2023 , under S.O. Karapur , Sub Division II( R), Sankhalim-Goa
-
-
-
... More
Supply & Erection 7.5 mtr RCC pole
14
51646
3689
... More
Re-Erection of 4 pin X arm channel with clamps & nut bolt for 7.5 mtr RCC pole
10
3050
305
... More
Re- Erection of 2pin X arm with clamps & nut bolt for 7.5 mtr RCC pole
10
2760
276
... More
Supply & Erection of 4 pin X arm channel side bracket with clamps & nut bolt for 7.5 mtr RCC pole
4
3488
872.1
... More
Supply & Erection of 2pin X arm channel side bracket with clamps & nut bolt for 7.5 mtr RCC pole
4
1864
466.08
... More
Re- Erection L.T. pin insulators
60
5940
99
... More
Re- Erection of G.I. pin for LT pin insulator
60
4440
74
... More
Re- Erection of L.T. Shackle insulators
20
2080
104
... More
Re-Erection of Metal Parts for LT Shackel Insulator
20
2080
104
... More
Supply & Erection of A.A. ' ANT conductor
0.09
597
6634
... More
Supply & Erection of A.A. ' GNAT' conductor
0.09
556
6183
... More
Removing of 7.5 mtr RCC pole
14
25823
1844.5
... More
Removing of 4 pin X arm with clamps & nut bolt for 7.5 mtr RCC pole
14
2135
152.5
... More
Removing of 2 pin X arm with clamps & nut bolt for 7.5 mtr RCC pole
14
1932
138
... More
Removing of L.T. pin insulators
60
2970
49.5
... More
Removing of G.I. pin for LT pin insulator
60
2220
37
... More
Removing of L.T. Shackle insulators
20
1040
52
... More
Removing of Metal Parts for LT Shackel Insulator
20
1040
52
... More
Removing of A.A. ' ANT conductor
1.78
5904
3317
... More
Removing of of A.A. ' GNAT' conductor
1.19
3678
3091.5
... More
Re-Stringing of A.A. ' ANT conductor
1.78
11808
6634
... More
Re-Stringing of of A.A. ' GNAT' conductor
1.19
7357
6183
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements