Electricity Department Tender
View complete overview of Goa Electricity Department Tender
Costs
EMD
₹ 20,45,357Document Cost
₹ 1,500Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ED_11643_1Bid Award Id
ViewTender No
Tender No.65(2023-24)/CSCTender Authority
Electricity Department ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and erection of straight through joint for 400sq.mm 33 kv cable(3000/500)+2
8
458000
57250
Cable Route marker (400x900x100) as per CEE approved drawing (1500/100)
15
7920
528
Warning tape.(Inclusive of Labour charges)
1.5
22500
15000
Sand for cushioning of HT underground cables.
270
585900
2170
RCC Hume Pipe 100mm dia with required no. of collars, for road crossing.
70
34160
488
Class B GI Pipe of diameter 150mm
70
117670
1681
Supply and laying of underground cable protective cover as per specification as given below:
The concrete slab shall be machine made using semi- dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-Press" machine with a high vibration frequency and hydraulic pressure of 40 MT, the size of the slab shall be 480mmx 250mmx 50mm. (+/- 2mm) and the concrete grade shall be M30 adhering to IS 456: 2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested. (1500+1500)/0.6
5000
675000
135
Bricks for cable separation(1500*5)(Inclusive of Labour charges)
7500
71250
9.5
Applying of laterite stone soling of size 150-200 mm size and murrum having P. I. value not more than 6 and laying including packing with smaller stones and consolidation with powder sand and rolling including spreading watering and consolidation of binding materials etc Measurements shall be considered on finished items. (0.2*0.9*1500)
270
596970
2211
Cost of Erection
-
-
-
Supply and Laying of XLPE 33 KV 3 Core x 400 Sqmm Armoured Cable through Conventional open trenching method in any type of soil including hard laterite(500 mts drum)(1500X2)+100
3100
1150100
371
Supply and erection of straight through joint for 400sq.mm 33 kv cable(3000/500)+2
8
44000
5500
Cable Route marker (400x900x100) as per CEE approved drawing (1500/100)
15
3840
256
Excavation in any type of soil including hard laterite soil.for 33 KV cable(1.3*0.9*1500)
1755
821340
468
Disposal of surplus excavated soil material by mechanical transportation including loading
1485
186842
125.82
Refilling of excavated soil
270
32400
120
RCC Hume Pipe 100mm dia with required no. of collars, for road crossing.
70
5390
77
Class B GI Pipe of diameter 150mm
70
12740
182
Supply and laying of underground cable protective cover as per specification as given below:
The concrete slab shall be machine made using semi- dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-Press" machine with a high vibration frequency and hydraulic pressure of 40 MT, the size of the slab shall be 480mmx 250mmx 50mm. (+/- 2mm) and the concrete grade shall be M30 adhering to IS 456: 2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested. (1500+1500)/0.6
5000
300000
60
WORK OF SUB-STATION EQUIPMENTS FOR PROPOSED 1X20MVA 33KV/11KV BADEM SUB STATION.
-
-
-
Cost of Material
-
-
-
33/11KV , 3phase,50 Hz, ONAN, outdoor, 20 MVA, copper wound, Power Transformer, filled with transformer oil (+10 % extra oil in non-returnable drums), Magnetic oil gauge indicator, winding temperature indicator and all other accessories including OLTC, remote control panel for OLTC, complete as per Technical specifications. ( end box on HV/LV)
1
22600000
22600000
33 KV/0.433KV, 100KVA, copper wound,oil filled, 3-phase, duly tested transformer with off-load tap changer, complete as per Technical specs.Losses as per Energy Efficient Level-II
1
160000
160000
33 KV 630Amps 4 way outdoor load break Switch comprising of 04 Nos 630Amps Isolators.
1
2478000
2478000
CONTROL AND RELAY PANEL FOR: INCOMER PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps, 33 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
1390000
1390000
CONTROL AND RELAY PANEL FOR: POWER TRANSFORMER 36 KV, 1250 A ( Bus bar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol, Numerical Trafo Differential relay with master, Trip Circuit supervision and Trafo protection Aux relay, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
1375000
1375000
CONTROL AND RELAY PANEL FOR: STATION TRANSFORMER 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 50/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
1215000
1215000
CONTROL AND RELAY PANEL FOR: INCOMER 12 KV, 1250 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 800-400-/5-5-1 Amps, 11 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter, ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
988000
988000
CONTROL AND RELAY PANEL FOR: OUTGOING FEEDER 12 KV, 630 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 400-200-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
4
3536000
884000
SETC of 4way, 11KV, 630Amps,31KA 3Sec, SF6 outdoor Ring Main Unit with Four Load Break Switches (LBS) with manual operated earthing switches inSF6 SCADA compatible and base channel. Battery charger along with batteries required for electrical opearations of RMU. Each module shall consists of VPIS, FPI, in LBS module (N-1) but not less than 1 no's per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet switch. LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.
4
3180000
795000
30V, 150 Amp Hr, Valve Regulated Lead Acid (VRLA) type maintenace free batteries set at 10 hr discharge rate consisting of 16 Nos, each of 2 V, cell having terminal connectors, self supporting stack fully charged ready to use complete with all other accessories alongwith nut & Bolts, as per technical specs.
2
244000
122000
Supply Erection , testing & commisioning of Thyristor controlled Battery Charger set with full wave rectification, 3 phase, 440 V, 50 Hz, input voltage for charging above specified 30 V, 150 Amphr battery with provision for float and boost charging and automatic changeover with necessary indicating meters and annunciation, required cable, connectors complete as per Technical specs.
2
355750
177875
415 V, AC Distibution board/panel of sheet steel enclosed cubical floor mounting type for catering auxialiary power supply of the substation consisting of 1 no, 400 Amp incomer, 2 Nos of 100 Amps, 4 Nos 63 amp & 2 Nos, 32 amp outgoing, 1 No metering module consisting of digital Electronic 3 phase 4 wire energy meter, voltmeter & ammeter with selector switch, phase indicating lamps etcs, complete as per Technical specs.
2
478920
239460
30 V, DC Distribution board/panel of sheet steel enclosed cubical floor mounting type for catering auxialiary DC power of the substation consisting of 1 No incomer (DP Air break switch/MCCB), changeover swich, 6 Nos outgoing feeders with HRC fuse, 1 No metering module consisting of Voltmeter & ammeter, power ON/OFF indication lamps, earth leakage relay DC fail alarm etc, complete as per Technical specs.
2
259250
129625
XLPE insulated armored 11KV (Type A2XFY, FRLS), 3 core 400 mm² aluminum cable for 11KV incomer and 4-feeders manufactured & tested in accordance with the IS:7098 (Part-2) and internationally accepted standards IEC 60502-2 for construction & IEC 60840 (1999) for testing. Supplied with terminating accessories conforming to IEC 60840. Inclusive of suitable aluminum lugs, H.D.G.I. Nut & bolts & washers etc. (150X7RUNS)
1050
3039750
2895
XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable for connecting external circuit to Power transformer and station transformer. Cable manufactured & tested in accordance with the IS:7098 (Part-2) and internationally accepted standards IEC 60502-2 for construction & IEC 60840 (1999) for testing. Supplied with terminating accessories conforming to IEC 60840. Inclusive of suitable aluminum lugs, H.D.G.I. Nut & bolts & washers etc. (150x4RUNS)
600
2160000
3600
Unarmoured Single Core 120 sq.mm 1.1 KV grade (5runx150Mts each )(1Spare)
750
123000
164
33 KV Heat shrinkable XLPE termination kit for 3 x400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
2
64640
32320
33 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
8
178624
22328
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983. (Quantity includes 1 No spare)
2
23334
11667
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983. (Quantity includes 1 No spare)
22
194480
8840
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 10x2.5sq.mm
750
315750
421
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 12x2.5sq.mm
750
351750
469
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 2x4sq.mm
250
40500
162
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 4x4sq.mm
2000
484000
242
Cable Trays & Accessories Type 'B' cable trench two layers 450/75 mm wide
100
89200
892
Cable Trays & Accessories Type 'B' cable trench two layers 600/75 mm wide
100
109000
1090
BMK Box (Panel) size 700x1000x500mm Thickness of 2mm HDGI, Angle stand mounted outdoor type doubble door panle powder coating opening form back and front.
2
60610
30305
Procurement of materials, design of the structures, preparation of fabrication drawings, fabrication, Galvanising, proto-assembly, testing of lattice type structure for 33 KV switchyard and 11KV takeoff structure i.e. Towers, beams, lighting tower, Equipment support structure etc. (Fabricated from structural steel conforming to IS 2062) including Nuts, bolts, foundation bolts, washers & other accessories complete as per Technical specs.
500
84500
169
Class B, 100 mm dia nominal bore, 3000 mm long pipe earth electrodes with test Connection links having welded flat of size 50 x 6 mm for connecting earth strip, RCC chamber, CI cover hinged to CI frame, other accessories as per Technical specs, alongwith required quantity of charcoal, salt etc or Bentonite to be buried below ground and to be connected with earth mat of MS Flat. i.e. Chemical Earthing.
58
675352
11644
Special Earthing Borewell type with 2 1/2 pipe 20 mts. deep in hard rock area
8
140760
17595
Lightning Spikes as per IS and technical specs
20
20000
1000
50 x 6 mm HDGI Flat for earth mat & risers.
870
180960
208
Air Conditioner Split AC of 2 Tons (5 star rating) of latest specifications including all accessories for Substation control room of reputed brands namely - Voltas, Blue star, Daikin, Carrier etc.
8
368000
46000
Executive table of size 60”(L)x36”(W)x30”(H) with table lop of 18mm thick prelaminated Particle Board of reputed brand with 3 drawers on RHS with automatic locking arrangement fabricated out of 20g CRC Sheet. Pretreated for Antirust and oven baked paint finish with Executive Chair.
2
32000
16000
Operator table of size 48”(L)x24”(W)x30”(H) with table lop of 18mm thick prelaminated Particle Board of reputed brand with 3 drawers on RHS with automatic locking arrangement fabricated out of 20g CRC Sheet. Pretreated for Antirust and oven baked paint finish with chair.
2
21000
10500
Computer table with chair as per approved design by Engineer-In-charge
2
24000
12000
IP Phone with latest specification
1
7500
7500
B & W Laser Printer Network Type as per latest specification
2
24000
12000
Computer with 8GB RAM, 1TB Hard Disk, I 7 Or higher version Processor, 21" Monitor, 3.2GHz, Window 8.1, Office 16 or higher with UPS(2.6Amp), USB ports at front and back both , ,internal speaker ,Key bord, Mouse and HDMI & Power & Connection Cables.
2
120000
60000
Medium back work chairs netted model(for officers) Low back with cusioned seats20-23''Wx 21-23Dx16-20'' seat& 33''Netted backrevolving and adjustable for seat height. Seat Cusioned with good quality foam and with5 pronged drum cluster wheel base.
10
70000
7000
Steel Industrial Lockers: overall sixe 78”x36”x19” having 18 individual compartments each having knob, lable holder ventilation louvers and Staple locking arrangement. Fabricated from 20g CRC Sheets and Pretreated for Antirust and oven baked paint finish
4
88000
22000
Office Cupboard 78”x36”x19” with adjustable 4 shelves making 5 compartments made out of C.R. sheet 20 guage with good locking arrangement with stainless steel keys in duplicate Pretreated for Antirust and oven baked paint finish
2
23000
11500
Supply of 2KVA Isolation transformer(1:1) confirmimg the following specifications: Voltage input: 230V AC Output 230V AC unregulated Protection 10Amps MCB on Primary side & cartridge 16Amps on both the sides Indication LED + moving iron voltmeter 300VAC Material of widing Copper Rating 2KVA frequency 50Hz Class IP 42Input cable 5Mts long 3C cable with 3pin plug Output 02 Nos of sockets-5 pin-5Amps earth terminal on MS Enclosure.
2
30500
15250
OPR - 30 ABB or equivalent Make Lightning protection system, 5 M SS Mast with baseplate and guywire and Maintenance free earthing system
2
214760
107380
Add for Control room building concealed wiring for lighting / illumination including all fittings such as fans, fixtures, distribution boards, switches, MCBs, earthing, water pump etc. as per approved design & drawing (only control room)
1
1019086
1019086.21
Cost of Erection
-
-
-
33/11KV , 3phase,50 Hz, ONAN, outdoor, 20 MVA, copper wound, Power Transformer, filled with transformer oil (+10 % extra oil in non-returnable drums), Magnetic oil gauge indicator, winding temperature indicator and all other accessories including OLTC, remote control panel for OLTC, complete as per Technical specifications. ( end box on HV/LV)
1
1284785
1284785.6
33 KV/0.433KV, 100KVA, copper wound,oil filled, 3-phase, duly tested transformer with off-load tap changer, complete as per Technical specs.Losses as per Energy Efficient Level-II
1
13575
13575
33 KV 630Amps 4 way outdoor load break Switch comprising of 04 Nos 630Amps Isolators.
1
13500
13500
CONTROL AND RELAY PANEL FOR: INCOMER PANEL 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps, 33 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
26000
26000
CONTROL AND RELAY PANEL FOR: POWER TRANSFORMER 36 KV, 1250 A ( Bus bar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 400-200-/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol, Numerical Trafo Differential relay with master, Trip Circuit supervision and Trafo protection Aux relay, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
26000
26000
CONTROL AND RELAY PANEL FOR: STATION TRANSFORMER 36 KV, 1250 A ( Busbar current - 1250A ) , 31.5 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, Inbuilt Earth switch, along with 3 Nos of 36 KV CT, 3 core, 50/1-1 Amps. LV Compartment with Breaker control panel consisting of ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, VPIS, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
26000
26000
CONTROL AND RELAY PANEL FOR: INCOMER 12 KV, 1250 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 800-400-/5-5-1 Amps, 11 KV/110/v3/110v3 V Line Potential Transformer. LV Compartment with Breaker control panel consisting of voltmeter, ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase, 4 wire, DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
1
18750
18750
CONTROL AND RELAY PANEL FOR: OUTGOING FEEDER 12 KV, 630 A ( BB - 1250A ) , 25 KA 3 Secs, 3 phase, indoor type VCB, with spring type operating mechanism, mounted on rack out type trolley, along with 3 Nos of 12 KV CT, 3 core, 400-200-/5-5 Amps, LV Compartment with Breaker control panel consisting of voltmeter , ammeter, MFM, BCPU NUMERICAL relays 61850 protocol with master and Trip Circuit supervision, LED type indication lamps, TTBs, Annunciation, 3 phase , 4 wire , DLMS energy meter with 4G modem along with Software updation in the back end system for data integration with MDM. Complete as per Technical Specification.
4
75000
18750
SETC of 4way, 11KV, 630Amps,31KA 3Sec, SF6 outdoor Ring Main Unit with Four Load Break Switches (LBS) with manual operated earthing switches inSF6 SCADA compatible and base channel. Battery charger along with batteries required for electrical opearations of RMU. Each module shall consists of VPIS, FPI, in LBS module (N-1) but not less than 1 no's per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet switch. LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.
4
38880
9720
30V, 150 Amp Hr, Valve Regulated Lead Acid (VRLA) type maintenace free batteries set at 10 hr discharge rate consisting of 16 Nos, each of 2 V, cell having terminal connectors, self supporting stack fully charged ready to use complete with all other accessories alongwith nut & Bolts, as per technical specs.
2
50000
25000
Supply Erection , testing & commisioning of Thyristor controlled Battery Charger set with full wave rectification, 3 phase, 440 V, 50 Hz, input voltage for charging above specified 30 V, 150 Amphr battery with provision for float and boost charging and automatic changeover with necessary indicating meters and annunciation, required cable, connectors complete as per Technical specs.
2
28500
14250
30 V, DC Distribution board/panel of sheet steel enclosed cubical floor mounting type for catering auxialiary DC power of the substation consisting of 1 No incomer (DP Air break switch/MCCB), changeover swich, 6 Nos outgoing feeders with HRC fuse, 1 No metering module consisting of Voltmeter & ammeter, power ON/OFF indication lamps, earth leakage relay DC fail alarm etc, complete as per Technical specs.
2
4500
2250
XLPE insulated armored 11KV (Type A2XFY, FRLS), 3 core 400 mm² aluminum cable for 11KV incomer and 4-feeders manufactured & tested in accordance with the IS:7098 (Part-2) and internationally accepted standards IEC 60502-2 for construction & IEC 60840 (1999) for testing. Supplied with terminating accessories conforming to IEC 60840. Inclusive of suitable aluminum lugs, H.D.G.I. Nut & bolts & washers etc. (150X7RUNS)
1050
385350
367
XLPE insulated armored 33KV(Type A2XFY, FRLS), 3 core 400 mm² aluminum cable for connecting external circuit to Power transformer and station transformer. Cable manufactured & tested in accordance with the IS:7098 (Part-2) and internationally accepted standards IEC 60502-2 for construction & IEC 60840 (1999) for testing. Supplied with terminating accessories conforming to IEC 60840. Inclusive of suitable aluminum lugs, H.D.G.I. Nut & bolts & washers etc. (150x4RUNS)
600
222600
371
Unarmoured Single Core 120 sq.mm 1.1 KV grade (5runx150Mts each )(1Spare)
750
71250
95
33 KV Heat shrinkable XLPE termination kit for 3 x400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
2
8782
4391
33 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983.
8
33128
4141
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable outdoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983. (Quantity includes 1 No spare)
2
5436
2718
11 KV Heat shrinkable XLPE termination kit for 3 x 400 Sq.mm. Cable indoor type Suitable for heavily polluted atmosphere conditions with total creepage distance of 31mm/KV & protected creep age distance of not more than 50% of the total creep age distance, complying to IS:1255-1983. (Quantity includes 1 No spare)
22
56056
2548
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 10x2.5sq.mm
750
55500
74
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 12x2.5sq.mm
750
55500
74
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 2x4sq.mm
250
10500
42
Control Cable (Multistrand Copper Conductor, PVC insulated, Armoured) 4x4sq.mm
2000
120000
60
Cable Trays & Accessories Type 'B' cable trench two layers 450/75 mm wide
100
1500
15
Cable Trays & Accessories Type 'B' cable trench two layers 600/75 mm wide
100
1500
15
Procurement of materials, design of the structures, preparation of fabrication drawings, fabrication, Galvanising, proto-assembly, testing of lattice type structure for 33 KV switchyard and 11KV takeoff structure i.e. Towers, beams, lighting tower, Equipment support structure etc. (Fabricated from structural steel conforming to IS 2062) including Nuts, bolts, foundation bolts, washers & other accessories complete as per Technical specs.
500
23500
47
Class B, 100 mm dia nominal bore, 3000 mm long pipe earth electrodes with test Connection links having welded flat of size 50 x 6 mm for connecting earth strip, RCC chamber, CI cover hinged to CI frame, other accessories as per Technical specs, alongwith required quantity of charcoal, salt etc or Bentonite to be buried below ground and to be connected with earth mat of MS Flat. i.e. Chemical Earthing.
58
362384
6248
Special Earthing Borewell type with 2 1/2 pipe 20 mts. deep in hard rock area
8
98904
12363
Lightning Spikes as per IS and technical specs
20
10000
500
50 x 6 mm HDGI Flat for earth mat & risers.
870
41760
48
OPR - 30 ABB or equivalent Make Lightning protection system, 5 M SS Mast with baseplate and guywire and Maintenance free earthing system
2
42952
21476
WORK OF SETC OF ILLUMINATION FOR YARD AND APPROACH ROAD TO THE PROPOSED 1X20MVA 33/11KV BADEM SUB-STATION.
-
-
-
Cost of Material
-
-
-
8Mts long Octagaonal poles made out of 4mm thick plate and having the following provisions and of approves make: a) 4Nos of J type M20x750mm long(UNF thread 100mm) foundtion bolts of EN 8 b) Base plate steel of size225x225mm, thickness 16mm c) 150mm dia HDPE pipe, PN-4, P-63, Grade-2.65mm for cable entry and exit(2Runs)
20
370000
18500
SETC 1.5Mts long single arm brackets HDGI, 3.25mm thick formounting of outer diameter 40mm (Inclusive of labour charges)
14
47600
3400
SETC 1.5Mts long doubble arm brackets HDGI, 3.25mm thick formounting of outer diameter 40mm (Inclusive of labour charges)
6
26400
4400
Supply and erection of LED light fitting, 130W with a suitable cable, clamps, 40m.m. pipe of length 1.5 mtrs to 3 mtrs length etc. suitable for Octoganal poles
26
398840
15340
Supply and fixing of FRP junction boxes of size 12" x 8"x6" and fixing at 1.5m height on the pole above ground the boxes shall have way porcelain connectors including cable glanding terminating cable with lugging etc complete.
20
77120
3856
Supply of 1.5 meter x 40 mm long rigid PVC pipe dia with bend/tee for cable entry and exit.
20
13280
664
Supply of MCBs of 2A including cable glanding terminating cable with lugging.
20
2260
113
Supply and laying of 4 core 2.5sq.mm multi-strand insulate copper cable from junction box to fixtures including termination of cable
250
47250
189
SETC of 415 V 4core 25mm sq Cable
650
167700
258
Supply and laying of underground cable protective cover as per specification as given.
1000
135000
135
Sand for cushioning of LT underground cables.
36
78120
2170
Streetlight Service pillar made out of CRCA Sheet with PU painted complete with TPN incoming and outgoing MCCB's, TP Contactors, Electronic/Digital meter, Mechanical Timer, connectors etc complete (Street light Pillars)
2
98948
49474
Cost of Erection
-
-
-
8Mts long Octagaonal poles made out of 4mm thick plate and having the following provisions and of approves make: a) 4Nos of J type M20x750mm long(UNF thread 100mm) foundtion bolts of EN 8 b) Base plate steel of size225x225mm, thickness 16mm c) 150mm dia HDPE pipe, PN-4, P-63, Grade-2.65mm for cable entry and exit(2Runs)
20
104820
5241
Supply and erection of LED light fitting, 130W with a suitable cable, clamps, 40m.m. pipe of length 1.5 mtrs to 3 mtrs length etc. suitable for Octoganal poles
26
27040
1040
Supply and fixing of FRP junction boxes of size 12" x 8"x6" and fixing at 1.5m height on the pole above ground the boxes shall have way porcelain connectors including cable glanding terminating cable with lugging etc complete.
20
5260
263
Supply of 1.5 meter x 40 mm long rigid PVC pipe dia with bend/tee for cable entry and exit.
20
1180
59
Supply of MCBs of 2A including cable glanding terminating cable with lugging.
20
180
9
Supply and laying of 4 core 2.5sq.mm multi-strand insulate copper cable from junction box to fixtures including termination of cable
250
12250
49
SETC of 415 V 4core 25mm sq Cable
650
61100
94
Excavation of trench of size 0.3x0.9x600 for laying of cable under ground through GI pipe at road cross and through trench at non road crossing including filling up of available excavated earth (excluding rock/stones) in trenches, plinths, sides, foundations, etc. in layers not exceeding 0.2mts depth consolidating each deposited layer by ramming and watering lead upto
162
75816
468
Disposal of suplus excavated soil/material by mechanical transportation and including loading and unloading, stacking, levelling as directed within a distance of 2500 Mts
36
4529
125.82
Supply and laying of underground cable protective cover as per specification as given.
1000
60000
60
Refilling of the excavated soil.
126
15120
120
Streetlight Service pillar made out of CRCA Sheet with PU painted complete with TPN incoming and outgoing MCCB's, TP Contactors, Electronic/Digital meter, Mechanical Timer, connectors etc complete (Street light Pillars)
2
7892
3946
WORK FOR SUPPLY OF TOOLS AND PLANTS FOR PROPOSED 1X20MVA 33/11KV BADEM SUBSTATION.
-
-
-
Crimping Tools 50sq.mm to 300 sq.mm size dies complete with handling case (hydraulic type)
2
40000
20000
Box spanner set complete with case
2
7000
3500
Safety helmate
20
6000
300
Hand gloves 33KV grade
30
14400
480
Safety Belt
20
30000
1500
33KV FRP Earthing rod 3 stage bottom 45mm top 25mm total length of 6 feet to 15.18 feet (all sizes +0.5%) Earthing rod with alluminium casting hook and copper strip on top cable 10Mts(10Sqmm)
24
98760
4115
Vacuum cleaner with all accessories
2
10000
5000
Digital Clamp Meter 1000Amps 600Volts
4
19200
4800
Earth Meggar with all accsessories
2
10000
5000
Megger 2500V MEGGAR Make with probes
1
6500
6500
Megger 1000V MEGGAR Make with probes
1
4000
4000
Danger board 11KV/33KV
25
1125
45
Fire Extinguisher dry type 6KG
20
100000
5000
Fire bucket with stand (a set of 3 bucket and 1 stand)
10
6000
600
Rubber matting 1 Mtr x 0.8mm 33 kv
30
45000
1500
Neon tester upto 33KV
2
36000
18000
Emergency light
10
10000
1000
Rechargeble Torches
10
5000
500
Battery tester with load
2
1000
500
Fixed spanner set double end 8mm to 32mm
6
2400
400
Ring spanner set double end 8mm to 32mm
6
2400
400
Hacksaw frame with blade
6
210
35
Hammer 1Kg
2
100
50
Drilling machine(wolf) with drill bit sets
2
10000
5000
Bench wice
2
1600
800
Resuscilation chart
4
100
25
Screw driver set (Min to Max)
2
400
200
Hand pump for transformer oil with all accessories
2
1000
500
Shock treatmetn chart
4
100
25
First Aid Kit
2
200
100
Pedestal drilling machine
1
15000
15000
Hand lamp
2
100
50
Water cooler(10ltr)
2
10000
5000
Aluminium ladder 20 feets long
4
12000
3000
Pedestal fan(Industrial)
4
10000
2500
Turfor with 5ton pulling capacity
2
16000
8000
Pin up board fabricated from plywood backed soft boardwith flannel coveringof chosen alluminium border size 4'x3'
2
22000
11000
Chalk less board fabricated from plywood backed white board with alluminium border size 4'x3'
2
14000
7000
Civil works for the proposed new 33/11 KV, 1x20 MVA Badem sub-station under sub-division-II, Div.XVII, Mapusa
-
-
-
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area
30
12540
418
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :
-
-
-
All kinds of soil
322.4
83501
259
All types of Ordinary rock including all types of laterite rock, blasting prohibited
1256.81
809385
644
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
348.95
63508
182
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
b)Moorum
101.55
72100
710
Half brick masonry in cement mortar 1:3(1 cement: 3 coarse sand) with bricks of class designation 40 kgs / cm2. b)Upto floor V level.
78.79
73668
935
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
209.22
270103
1291
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4(1 cement : 4 coarse sand) in foundation and basement
309.5
1363347
4405
Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
263
203562
774
Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
a)All works upto plinth level
166.02
1067010
6427
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
61.79
46960
760
Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement: 1½ coarse sand:3 graded stone aggregate 20mm nominal size)
-
-
-
a) All works upto plinth level
256.34
2152743
8398
b) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level
176.92
1634386
9238
c)in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level
186.87
1740320
9313
Centering & shuttering including Strutting, Propping & removal of forms for :
-
-
-
Foundations, Footings, Bases for columns
365.26
133319
365
Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
1541.03
701168
455
Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
432.24
256318
593
Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels plinth beams not exceeding 1m in depth
599.97
245987
410
Staircases (except spiral staircases) excluding landing
50.13
17094
341
Suspended floors,roofs landings,shelves & their supports
1016.65
648625
638
Providing TMT steel reinforcement bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.))(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in allthe floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
62012.47
6759359
109
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.
(b.Second class Indian teak wood
0.31
51204
165175
Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminum butt hinges with necessary screws: Second class Indian teak wood
24.12
142115
5892
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws.
(a) Plain grill I
1315.2
143356
109
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete
a) 125 x 70 x 4.0mm (ordinary type)
10
1610
161
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.
(a) In R.S. joists, channels, angles, tees
94.48
1176464
12452
Galvanised Iron Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position etc. complete as per Engineer-in-charge
30.52
6592320
216000
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for falling shutter stop cover and spring.
13.2
30822
2335
Providing and fixing anodized aluminum shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.
(b) Plain glass
93.15
268924
2887
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004)Vol & II including all taxes, transportation, scaffolding and handling etc. completeas perdirection of the Engineer-in-charge: Adjustable louvered windows.
b) Plain glass
0.96
1833
1910
Extra for powder coating with pure polyester powder of shade of required colour on the aluminum section
94.11
37173
395
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
3
4377
1459
Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbing complete Granitic slab (jet black with mirror polish) 20 mm thick add 10% wastage 1.00
424.43
1271167
2995
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing inwhite cement mixed with pigment of matching shade complete.
(b)Wall Ceramic Glazed Tiles : 300 x 450
19.06
19231
1009
Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete
(a) 600x 600 mm Dark Shades
9
10494
1166
12mm cement plaster 1:4 (1 cement : 4 fine sand)
711.29
135856
191
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
416.8
236325
567
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
38.4
13056
340
6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)
621.91
97017
156
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 (1 cement: 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
57.24
49913
872
Neat Cement punning
57.24
2804
49
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge
2661.96
753334
283
Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.
62.71
3198
51
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
106.56
4582
43
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
508.74
47821
94
Melamine polishing on wood work (one or more coat)
a) Glossy
62.71
51171
816
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1289.17
109579
85
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
1289.17
51566
40
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
1289.17
121181
94
Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
2095.66
347879
166
Providing and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.
b) Orissa pattern W.C. pan
1
5387
5387
Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. Flushing cistern (of approved make) with fittings, rack bolts 32 mm diameter P.V.C. Telescopic flush pipe with fit tings and clamps 25mm P.V.C... over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required.
a)W.C. pan with white plastic seat and lid.
1
6197
6197
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
a) Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.
2
14120
7060
Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.
2
98
49
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.
I) SCH-80(blue)/(white) a) 20 mm dia nominal outer dia pipes
35
6370
182
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
I) SCH-80(blue)/(white)
-
-
-
20mm outer dia.
200
31200
156
32mm outer dia.
100
26000
260
Providing and fixing brass bib cock (heavy) of approved quality :
a) 15 mm nominal bore
20
7680
384
Providing and fixing brass stop cock (heavy) of approved quality :
-
-
-
20 mm nominal bore
3
939
313
25 mm nominal bore
4
1652
413
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :
-
-
-
20 mm nominal bore
7
4074
582
25 mm nominal bore
12
10560
880
40mm nominal bore
3
4467
1489
Providing and fixing ball valve (brass) of approved quality :
-
-
-
High pressure with P.V.C. floats:20 mm nominal bore
4
1924
481
High pressure with P.V.C. floats:25mm nominal bore
2
1180
590
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:
45 cm (18”) length .
4
612
153
Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:
100 mm diameter.
2
558
279
Providing and placing on terrace roof of floor two (1st floor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.
1000 lit. capacity
4
30952
7738
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. :
Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610 mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
6
57810
9635
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
-
-
-
110 mm dia
54
15660
290
75 mm dia
25
3850
154
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :
-
-
-
100 mm dia
2
398
199
75 mm dia
8
1088
136
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
-
-
-
110 mm dia
4
2220
555
75 mm dia
4
984
246
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 :
20mm nominal bore
2
2132
1066
Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993
2
984
492
Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods.
10.4
4139
398
Providing & fixing 20mm door shutter Yashashri make or equivalent, made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS2782 & DIN53459 test methods.
3.44
8888
2584
Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
10
2460
246
Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality).
4
9032
2258
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete14-09-2023250 x 10 mm
10
5410
541
Providing and fixing bright finished brass handles with necessary screws etc complete
-
-
-
125 mm
16
1712
107
100 mm
4
384
96
Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.
1
28215
28215
Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.
22.28
85622
3843
Providing and fixing G.I. chainlink mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
60
16860
281
1.2 mts. high fencing with 1.20 mt. jamba ballie posts 30cm girth (min) placed at 2.5 mts. apart embedded in cement concrete blocks, corner, end and every 12th post to be strutted provided with 6 horizontal lines and two diagonal of barbed wire 9.38 kg/ 100 mts. minimum between two posts, fitted and fixed with G.I. staples including coal tarring of ballies complete (cost of post, struts, earth work and concrete to be paid for separately):
G.I. barbed wire
220
28380
129
Extra for providing and fixing prince or equivalent make PVC SWR running outlet with 2 clamps for socketed half round eaves gutters: 140 mm nominal size
8
1128
141
Extra for providing and fixing prince or equivalent make PVC SWR stop end outlet with one clamp for socketed half round eaves gutters.:140 mm nominal size
4
496
124
Supplying and sreading of 40/20 mm basaltic or granitic stone aggregate in the switchyard
81.96
181049
2209
Add for Control room building concealed wiring for lighting / illumination including all fittings such as fans, fixtures, distribution boards, switches, MCBs, earthing, water pump etc. as per approved design & drawing @ 10% of the civil estimate (only control room)
1
1221903
1221903.43
Add of extra for power plugs 4% of civil works (only control room)
1
488761
488761.37
Add for external Service connection 0.5% of civil works (only control room)
1
61095
61095.17
20% adhoc increase (as per corrigendum no: 3-3-05/SSW-PWD/Vol-I/2022-23/126 dated: 05/08/2022) on Civil items (Sr. No. 1 to 8, 14 to 17& 20 to 72) i.e. on Rs. 7391140.26
1
1478228
1478228.05
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements