Directorate Of Agriculture Tender

Centering & shuttering including Strutting, Propping & removal of forms for :(i)Foundations, Footings, Bases for columns

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.a)plain grills

Providing and fixing bright finished brass door latch with necessary screws etc completea)300x 16 x 5 mm

Providing and fixing anodised aluminium sliding door bolt anodised transparent or dyed required colour and shade with bolts, nuts and screws etc. complete:a)300 x 16 mm

Providing and fixing aluminium tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. complete.a)300 x 10 mm

Providing and fixing aluminium handle anodised or dyed to required colour or shade with screws etc. complete.a)125 mm

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.a)In R.S. joists, channels, angles, tees

Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint.b)Using M.S. Flats 30 mm x 6 mm for diagonals braces and central cross

TWO TRACK SLIDING WINDOW (Economical):-Providing & fixing Two Track sliding window in economical section made out of 60mm x 45mm x2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.a)40 mm thick

Kotah stone slab flooring over 20 mm (average) thick base of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete

Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.

12mm cement plaster 1:5 (1 cement : 5 coarse sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. LeadA)Of area 3 sq.m. and below

Dismantling steelwork in single sections in channels, angles, tees and flats including dismembering and stacking within 50 mts. lead

Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead.

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.B)Post construction

Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FR PVC insulated copperconductor single core cable in PVC casing caping withmodular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.Group A -- with Cat A Modular Accessories

Wiring for 5A /15A plug with 2 x 4 sq.mm FR PVCinsulated copper conductor single core cable in PVC casingcapping alongwith 1 No 4 sq.mm FR PVC insulated copperconductor single core cable for loop earthing as required.

Installation, earthing, testing and commissioningof ceiling fan including wiring the down rod ofstandard length (upto 30 cm) with 1.5 sq .mm FRPVC insulated copper conductor single core cableincluding providing and fixing phenolic laminatedsheet cover on the fan box etc. as required.

Installation, earthing, testing and commissioningof resistancetype ceiling fan regulator iin existing5006 switch box including connection with 1.5 sq .mmFRLS PVC insulated copper conductor single corecable earthing the regulator etc. as required.

Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge includingpainting etc as required

Installation, earthing, testing and commissioningof exhaust fan upto 510 mm sweep in the existing opening including making the hole to suit the sizeof the above fan making good the damageconnections testing commissioning etc as required

Earthing with copper earth plate 600 mm x 600 mm x 3 mmthick including accessories and providing masonryenclosure with CI/RCC cover having locking/liftingarrangement and watering pipe etc. (but without charcoalor coke and salt) as required as per the Earthing Drawingprovided by the Engineer-Incharge.The scope of workincludes the following: a) Excavation of pit of size 1.0x1.0x3.0 mtrs(min) and disposal of excavated soil. c)WateringGI pipe, 20 mm Class B, with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refillingthe pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation.e)Masonary chamber with proper foundation, cover plateand locking arrangement. f) Testing of earth value withearth megger and certifications of its value. g)wateringarrangement (plumbing will be paid seperately).In rocky strataExtra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Supplying installation testing and comissioning of 22wLED surface and wall mounted LED batten-tube of make jaquar(cat no.Commercialm indoor series glaza ultra aluminium,item code LGLZU1X022XN ) of jaquar or equivalent make complete as required and approved by enginerr-in charge.