Directorate Of Agriculture Tender

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Centering and shuttering including struttings, propping etc. and removal of formwork for :Foundations, footings, bases for columns and mass concrete.

Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.b)Second class Indian teak wood

Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws:Second class Indian teak wood

Extra for providing vision panel not exceeding 0.1 sq.m. in all types of flush doors (cost of glass excluded).Rectangular or square Unit: SQ.M. door area

Providing and fixing louvers 50 mm wide in grooves in clerestory window frames excluding the cost of frames.b)Glass sheets 3 mm thick

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.b)40 x 3 mm flat iron hold fast, 15 cm long

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.b)Ornamental grill

Providing and fixing bright finished brass sliding door bolts with nuts and screws etc completea)300 x 16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. completea)250 x 10 mm

Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

Providing and fixing chromium plated brass handle with necessary screws etc. completea)125mm

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.a)In R.S. Joists

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.b)In tees, angles, flats and channels

Providing & fixing M.S. round holding down with nuts & Washer plates complete.

Precast plain cement chequered tiles 22 mm thick of required shades laid in floors, treads of steps and landing on 25 mm thick bed of lime mortar 1:1:1 (1 lime putty :1 surkhi: 1 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.d)Dark shades using pigment

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a)20 mm thick.

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.

12mm cement plaster 1:3 (1 cement : 3 coarse sand)

Painting 1 coat with oil type wood preservative of approved brand & manufacture on old work.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and fixing R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreate granitic or basaltic stone aggregate 12.5 mm nominal size) benches including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement : 3 fine sand) thickness not exceeding 6mm on exposed surface to give smooth and even surface except on the seat & the back of the bench which shall be of marble mosaic chips finished, rubbed and polished to granolithic finish top layer 6mm thick with white black coloured marble chips of sizes from smallest to 4mm nominal size laid in cement marble powder mix 3: 1 (3 white cement : 1marble powder) by weight in proportion of 4 cement marble powder mix : 7 marble chips by volume with under layer 12mm thick cement plaster 1: 3 (1 cement: 3 coarse sand) incl. finishing the rear and bottom sides with waterproofing cement pant of approved brand and required shade (3 or more coats) to give an even shade complete

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.Size 30 cm L x 50 cm H x 15 cm T

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.a)Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity.

Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M 50 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design / shape laid in 50 mm thick compacted be of course sand. filling the joints with course sand, etc. all complete as per the direction of Engineer.