Wood Tenders

Details: Description Republic Of The Philippines Province Of Quezon Municipality Of Polillo ***** Invitation To Bid For Supply And Delivery Of Office And Other Supplies For The 1st Quarter-lgu Polillo Quezon 1. The Municipality Of Polillo, Through The Approved Budget 2025, Approved By The Sangguniang Bayan Of Polillo Intends To Apply The Sum Of Eight Hundred Fifty-seven Thousand Three Twelve Pesos & 68/100 Only (php 857,312.68) Being The Abc To Payments Under The Contract For Supply And Delivery Of Office And Other Supplies For The 1st Quarter-lgu Polillo Quezon Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Polillo Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipality Of Polillo And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 3-10, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below Or (ii) Online Or Electronic Submission As Indicated Below On Or Before February 10, 2025 2:30pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On February 10, 2025 2:30pm At The Given Address Below And/or Messenger. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Municipality Of Polillo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Deborah B. Marasigan Bac Chairperson & Bac Secretariat Mabini St. Brgy. Poblacion, Polillo, Quezon, 4339 Bac.polillo@gmail.com Deborah B. Marasigan Bac Chairperson Office Supplies Anti-virus, Internet Security, Multi-device 3 Box Ballpen, Supergrip; Black; Rubbergrip, Retractable 12 Piece Ballpen, Supergrip; Black ; 12piece/box 8 Box Ballpen, Black, Gel Pen G2-05 86 Piece Ballpen, Pink, Gel Pen G2-07 5 Piece Ballpen, M&g Gelpen 0.5 (orange) 10 Piece Ballpen, Black,ballpoint Bps Fine 0.7mm 7 Piece Ballpen, Black 0.5mm/50pcs/box 3 Box Ballpen, Blue 0.5mm/50pcs/box 1 Box Ballpen, Signpen Black,hi-tech-point V7 Grip 7 Box Ballpen, Sign Pen, Blue Liquid/gel Ink,0.4mm 4 Piece Ballpen, Sign Pen, Black Liquid/gel Ink,0.7mm 47 Piece Ballpen, Sign Pen, Blue Liquid/gel Ink,0.7mm 6 Piece Ballpen, Signpen, 1pt. 25 Piece Ballpen, .5/50pcs Per Box 1 Box Ballpen, .5mm/50pcs Per Box, Black 4 Box Battery,aa, 2's/pack 24 Pack Battery, Aaa, 2's/pack 19 Pack Bond Paper, Short Subs. 24, (blue Cover) 35 Ream Bond Paper, Multi Purpose Legal 80 Gsm,(blue Cover) 20 Ream Bond Paper, A3 10 Ream Carbon Film, Legal, 10's 2 Pack Certificate Frame, A4 Size, Glass Cover, Wood Frame 2 Piece Certificate Frame, 8.5 X 11 Pvc Black 10 Piece Certificate Holder, A4 80 Piece Certificate Holder, Legal 50 Piece Clip Backfold, 1" Colored,25mm 12's 6 Box Clip Backfold, 1 1/4" Colored ,12's 4 Box Clip Backfold, 2" Colored 3 Box Clip Backfold, 19mm 3/4 Inch 45 Box Clip Backfold, 25mm 1inch 30 Box Clip Backfold, 32mm 1.25inch 30 Box Clip Backfold, 50mm ,2inch 18 Box Clipboard, Long With Cover With Clip 4 Piece Correction Tape, Refill; 2s/pack ,whiper Mr;wh-605 7 Piece Correction Tape, Refill; 2s/pack , Dong-a 6 Pack Correction Tape 5mm X 8m, Clear, Roller 46 Pack Correction Tape 5mm X 8m, Clear, Roller 19 Pack Data Folder, With Taglia Lock 12 Piece Double Adhesive 1/2" 27 Roll Double Adhesive 1" 39 Roll Double Adhesive 2" 6 Roll Double Adhesive 3/4 15 Roll Duct Tape 12 Roll Envelope, Plastic With Handle & Zipper 3 Piece Envelope, Documentary, For Legal Size, Brown 1 Pack Envelope, Expanding, With Garter, Legal 23 Piece Envelope,mailing 4 Box Envelop, Transparent Plastic, Long W/out Handle 11 Piece Electrical Tape, (flame Retardant, Pvc Electrical Isulating) 13 Roll Eraser, Plastic Or Rubber 2 Piece Expandable Folder, White, Long 55 Piece Fastener, 7cm -plastic 21 Box Fastener, Metal- 7cm 2 Box Flower Wrapper, 20pcs 58x58cm 2 Sided Color Lilac Purple And Nude Pink 2 Pack Flower Wrapper, 20pcs 58x58cm 3 Sided Color Cardamon Purple And Ash 1 Pack Folder, Long Tab 100pc/pack 7 Bundle Folder,expanding, Legal; For Thick Files 25 Piece Folder,expanding, Legal; For Thick Files (red) 20 Piece Folder,expanding, Legal; For Thick Files (blue) 20 Piece Folder,expanding, Legal; For Thick Files (green) 20 Piece Glue, 225 G 11 Bottle Guntacker Staple Wire, Tr45 3 Box Ink 001, Magenta 10 Bottle Ink 001, Yellow 8 Bottle Ink 001, Black 11 Bottle Ink 001, Cyan 10 Bottle Ink 003,black 57 Bottle Ink 003,cyan 31 Bottle Ink 003,magenta 29 Bottle Ink 003,yellow 31 Bottle Ink 680, Colored 1 Bottle Ink 680, Black 1 Bottle Ink, Btd60 Black 48 Bottle Ink, Bt5000 Cyan 27 Bottle Ink, Bt5000 Magenta 27 Bottle Ink, Bt5000 Yellow 27 Bottle Ink, Bt6000 Black 10 Bottle Ink, Bt6000 Cyan 6 Bottle Ink, Bt6000 Magenta 6 Bottle Ink, Bt6000 Yellow 6 Bottle Label Tape, Lk-wbvn 36mm Black & White 3 Roll Manila Paper 50 Piece Marker, Permanent, Fine , Black 13 Piece Marker, Permanent, Broad , Black 25 Piece Marker, Whiteboard Black 9 Piece Marker, Whiteboard Red 2 Piece Marker, Highlighter 6 Piece Marker, 3 Colors 6 Set Notepad, 3m, Assorted Colored 6 Pad Notepad, Stick On, 2 X 3" A03, 100 Sheets (76 X 76mm) 24 Pad Notepad, Stick On, 3 X 4" A04 100 Sheets (101 X 76mm) 13 Pad Notepad, Stick On, 3 X 3" 5 Pad Paper Clip, 33mm 100pcs/box, Vinyl Coated 39 Box Paper Clip, 55mm 100pcs/box, Vinyl Coated 38 Box Pencil, No.2, With Eraser ; 12s/box 8 Box Philippine National Flag 3 Piece Photopaper, 10's/pack , Glossy, A4 200 Gsm 19 Pack Photopaper, 10's/pack , Matte 32 Pack Plastic Ring Binder, 8mm 20 Piece Plastic Ring Binder, 10mm 20 Piece Plastic Ring Binder, 14mm 20 Piece Push Pins, 50pcs/pack 2 Box Record Book, 300 Pages, 2 Book Record Book, 150 Pages, 2 Book Rer 7 Pad Self-inking Stamp Ink, 28ml,black 1 Piece Signpen, G-tech, C-3, Black 16 Piece Signpen, G-tech, C-4, Black 29 Piece Signpen, G-tech, C-4, Red 4 Piece Signpen, G-tech, C-4, Blue 5 Piece Signpen, Hi-techpoint V5 Retractable, Green 3 Piece Signpen, Hi-techpoint V5 Retractable, Black 6 Piece Signpen, Hi-techpoint V10, Black (1.0mm) 11 Piece Signpen, .7 Black 85 Piece Signpen, .7 Blue 85 Piece Signpen Refill, C-4, Blue 8 Piece Signpen Refill, C-4, Black 17 Piece Specialty Board, 8.5 X 10 Thickness: 235gsm; Quantity 10pcs/pack 10 Pack Specialty Board, 8.5 X 13 Thickness: 200gsm; Quantity 100pcs/pack 6 Pack Specialty Paper, 200gsm, 8.5x13", 100 Sheets/pack 6 Pack Specialty Paper, 200gsm, Letter, 10 Sheets/pack 3 Pack Staple Wire, Standard 23 Box Stamp Pad 2 Piece Stamp Pad Ink, Black 4 Piece Sticker Paper, A4 Matte, 10 Sheets 29 Pack Sticker Paper, A4 Glossy Vinyl Sticker, 10 Packs 8 Pack Sticky Flag, Brialliant Adhesive/indexing Note (ai-5, 12's/pack.' 5 Colors 143 Pack Table Signage 7 Piece Tape Masking , 48mm 3 Roll Tape Masking , 24mm 3 Roll Tape Transparent 48mm 26 Roll Tape Transparent 24mm 22 Roll Toner Kit, Tk-6329 For Kyocera Taskalfa 5003i 3 Unit Other Supplies Alcohol, 500ml, 70% 50 Bottle Alcohol, 70% Ethyl/isopropyl, 4liters/gal 7 Gallon Airfreshner, Bathroom Deodorizer, Scented Gel 23 Piece Airfreshner, Bathroom Deodorizer, Scented Gel- Sakura & Water Lily 2 Piece Airfreshner, Automatic Spray Refill, Morning Freshness 20 Piece Airfreshner, Automatic Spray Refill, Lavander & Vanilla 3 Piece Airfreshner, Spray 58 Piece Airfreshner, Sport Car, Wild Berries Refill 9 Piece Antibac Fabric Conditioner 18 Pack Baby Wipes 5 Pack Bathroom Cleaner, 900 Ml, Thick Solution 28 Bottle Bathroom Tissue, 2 Ply, 12's/pack 15 Roll Bathroom Tissue, 3 Ply, 12's/pack 3 Roll Bleach, 1 Liter ; Color Safe 46 Bottle Bleach, 2 Liter ; Color Safe 11 Bottle Bleach, 1 Gallon 8 Bottle Bleach, 1 Liter, White 3 Bottle Broom, Tingting Kaong 11 Piece Broom, Soft ; Tambo 20 Piece Brush, Laudry 1 Piece Bulb, Led 18 Watts 20 Piece Cleaner, Scouring Powder 18 Can Deodorizer, For Toilet ; Sampaguita 3 Piece Deodorizer, For Toilet ; Lemon , Albatros 39 Piece Detergent Bar, 140g As Pack 12 Bar Detergent Powder, 1kg 30 Pack Disinfectant Spray, Aerosol 510g 21 Can Diswashing Liquid, Kalamansi, 250 Ml 44 Bottle Diswashing Liquid, 1 Gallon 15 Gallon Doormat, Clothe; Large 20 Piece Door Knob,finish: Satin Stainless Steel, Backset: 2 3 Piece Eco Lum, Led T8 Tube Box Type Set 3 Piece First Aid Kit, Medicine/first Aid Kit Cabinet With Contains Medicines 1 Set Floor Wax, Liquid, 900 Ml 12 Can Fragrance Oil, 100ml Okada Scent Scenssivity Corner 3 Bottle Fragrance Oil, 100ml Fresh Bambo Scenssivity Corner 2 Bottle Fragrance Oil, 100ml Espresso Scent Scenssivity Corner 3 Bottle Fragrance Oil, 100ml Merry Vanilla Scent Scenssivity Corner 3 Bottle Fragrance Oil, 100ml Sparkling Lemon Scent Scenssivity Corner 3 Bottle Furniture Polisher 1 Bottle Gasul Refill 16 Tank Glass Cleaner, Regular, 500 Ml 2 Bottle Hand Sanitizer, Scented Moisturizing Gel, 50ml 2 Bottle Hand Towel 2 Doz Insecticide, Big 31 Bottle Liquid Sosa, Clear Clogged Pipes, Sinks & Drains 6 Bottle Liquid Hand Sanitizer,500ml 12 Bottle Liquid Hand Soap, 500ml 2 Bottle Muriatic Acid, 1 Liter 20 Bottle Nylon Rope, Polythylene Rope No. 5 2.5m/ 200meter 1 Roll Pot Holder 9 Bundle Rags, All Cotton 28 Piece Raincoat, Pants & Jacket (large) 4 Piece Raincoat, Pants & Jacket (x-large) 4 Piece Sacks 4 Piece Scouring Pad With Foam 28 Piece Table Top Glass 1 Unit Tissue, 12 Rolls Per Pack 37 Pack Tissue, Interfolded Paper Towel 22 Pack Toilet Bowl Cleaner, 1 Liter 5 Bottle Toilet Brush, With Handle 6 Piece Trashbag, Medium 13 X 13x 32; 10 Pcs/pack 70 Piece Trashbag, Medium 15 X 15x 17; 10 Pcs/pack 24 Piece Trashbag, 940mm X 1016mmm 10pcs/roll/pack 32 Piece Trashbag, Plastic,transparent 32 Piece Wipes, 20sheets, Cooling Wipes 12 Pack Wipes, Disinfectant Multi-surface Wipes 4 Pack

Details: Description Tesda Viii-tti-op-06-f02 Rev. No. 00 – 03/18/2024 Request For Quotation Date: February 11, 2025 Rfq No. : 2025-02-0057 Pr No : 2025-02-0057 Name Of Business/ Company : Address : Tax Identification No.: Philgeps Registration No.: The Balicuatro College Of Arts And Trades, Through Its Procurement Unit, Intends To Procure Tools And Materials For Assessment Center Accreditation For Food Processing Nc Ii(amended), Which Will Be Undertaken In Accordance With Section 53.9 (small Value Of Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein Subject To The Terms And Conditions Provided In The Last Page Of This Rfq. Submit Your Quotation Duly Signed By You Or Your Duly Authorized Representative Not Later Than Feb 18,2025 At 2:00 P.m. Through Email At Tesdabcatsupply17@gmail.com. Interested Suppliers Are Required To Submit Copies Of The Following As Per Annex “h” Of The 2016 Revised Irr Of Republic Act No. 9184 Along With Your Quotation/proposal: A) Philgeps Registration Number B) Mayor’s/business Permit C) Income/business Tax Return (for Abc Above P500k) D) Omnibus Sworn Statement (for Abc Above P50k) Open Quotations May Be Submitted Manually At The Tesda-bcat Campus, Magallanes St., Sabang Ii, Allen, Northern Samar Or Email At Tesdabcatsupply17@gmail.com In Pdf Format. For Further Queries, You May Contact Us At Telephone No. 09275821039 Or Email Address At Bcat2016@tesda.gov.ph Daryl P. Lim Administrative Officer Iv Head, Finance And Administrative Unit   Tesda Viii-tti-op-06-f03 Rev. No. 00 – 03/18/2024 Price Quotation Form Date: __________________ Balicuatro College Of Arts And Trades Sabang Ii, Allen, N. Samar _____________________________ _____________________________ Sir/madam : After Having Carefully Read And Accepted The Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: No. Item/technical Specifications Qty. Unit Approved Budget For The Contract (in Peso) Offer Compliance With The Technical Specifications (please Check) Price Offer Remarks Yes No 1 Knives(stainless Steel ) 10 Pcs. 450.00 [ ] [ ] 2 Measuring Spoons(stainless Steel) 5 Set 250.00 [ ] [ ] 3 Measuring Cups (soilid) 5 Set 250.00 [ ] [ ] 4 Measuring Cup (liquid) Glass 5 Set 1,950.00 [ ] [ ] 5 Clock/timer 2 Unit 200.00 [ ] [ ] 6 Mixing Bowl (stainless Steel 3 Li) 10 Sets 500.00 [ ] [ ] 7 Hard Chopping Board 10 Pcs. 1,200.00 [ ] [ ] 8 Dial Thermometer 2 Pcs. 500.00 [ ] [ ] 9 Blender/homogenizer(heavy Duty) 5 Units 5,000.00 [ ] [ ] 10 Jar (liter) Stainless With Cover 5 Pcs. 250.00 [ ] [ ] 11 Food Processor 1 Unit 3,000.00 [ ] [ ] 12 Wire Basket 5 Pcs. 200.00 [ ] [ ] 13 Whetstone 2 Pcs. 250.00 [ ] [ ] 14 Caserole (stainless Steel) 2li 10 Pcs. 500.00 [ ] [ ] 15 Saucepan(stainless Steel) 2 Li 10 Pcs. 500.00 [ ] [ ] 16 Wooden Spoon 10 Sets 150.00 [ ] [ ] 17 Spoon Basting 10 Sets 150.00 [ ] [ ] 18 Weighing Scale(10 Kg) 5 Units 500.00 [ ] [ ] 19 Weighing Scale (1kg) 5 Units 250.00 [ ] [ ] 20 Chiller 1 Units 17,619.00 [ ] [ ] 21 Refrigerator 1 Units 6,500.00 [ ] [ ] 22 Trolley(stainless Steel 1000kg Capacity) 1 Unit 1,000.00 [ ] [ ] 23 Impulse Sealer(300 Mm) 1 Unit 350.00 [ ] [ ] 24 Pressure Cooker (50 Liters) 1 Unit 15,000.00 [ ] [ ] 25 Oven( Gas And Electric) 1 Unit 9,000.00 [ ] [ ] 26 Meat Grinder 1 Unit 4190.00 [ ] [ ] 27 Stuffer/linker 1 Unit 5,293.00 [ ] [ ] 28 Paddle Spoon 5 Sets 1098.00 [ ] [ ] 29 Food Tong 10 Sets 40.00 [ ] [ ] 30 Steamer 2 Unit 1210.00 [ ] [ ] 31 Soaking Container(stainless Steel 10 Li) 5 Pcs 600.00 [ ] [ ] 32 Peelers(set) 10 Sets 100.00 [ ] [ ] 33 Safety Boots (white) 10 Pairs 695.00 [ ] [ ] 34 Lab Gown 10 Pcs 269.00 [ ] [ ] 35 Hairnet 10 Pcs 42.00 [ ] [ ] 36 Facemask(box 50pcs) 10 Pcs 38.00 [ ] [ ] 37 Hand Glove(box 100pcs) 10 Pairs 99.00 [ ] [ ] 38 Utility Trays (21 Inches) 10 Pcs 72.00 [ ] [ ] 39 Colander(stainless Steel) 10 Pcs 274.00 [ ] [ ] 40 Chef Knives(set) 10 Pcs 299.00 [ ] [ ] 41 Big Frying Vat (kawa) 19 Inch 5 Pcs 750.00 [ ] [ ] 42 Calculator(solar) 5 Pcs 399.00 [ ] [ ] 43 Spatula(12 Inches) 5 Pcs 53.00 [ ] [ ] 44 Food Trays(21 Inches) 5 Pcs 89.00 [ ] [ ] 45 Container For Salt Condiment And Spices(set) 5 Pcs 399.00 [ ] [ ] 46 Mixing Containers/vat 10 Sets 299.00 [ ] [ ] 47 Gas Stoves Glass Top With Regulator 2 Units 4,000.00 [ ] [ ] 48 Polysealer 5 Units 900.00 [ ] [ ] 49 Lpg Tank With Lpg Gas 2 Unit 2,500.00 [ ] [ ] 50 Ph Meter 1 Unit 170.00 [ ] [ ] 51 Vegetable Cutter(food Processor) 1 Unit 2,300.00 [ ] [ ] 52 Probe Thermometer 1 Unit 106.00 [ ] [ ] 53 Freezer, Upright 2 Unit 19,000.00 [ ] [ ] 54 Cooler Box(15 Liters) 1 Unit 3,000.00 [ ] [ ] 55 Titration Set-up( Iron Stand, Glass Burette 100 Ml And Erlenmeyer Flask 500 Ml) 1 Set 1700.00 [ ] [ ] 56 Table (3ft X 4 Ft)(100/120x50x80cm) Stainless Steel 1 Set 3,599.00 [ ] [ ] 57 Cap Sealer 1 Unit 15,000.00 [ ] [ ] 58 Headspace Gauge(canning Set) 1 Unit 349.00 [ ] [ ] 59 Vernier Caliper 5 Units 400.00 [ ] [ ] 60 Vacuum Gauge 1 Unit 150.00 [ ] [ ] 61 Cabinet Dryer With Trays 1 Unit 25,000.00 [ ] [ ] 62 Solar Dryer 1 Unit 16,000.00 [ ] [ ] 63 Dehydrator(16 Layers) 1 Unit 9,490.00 [ ] [ ] 64 Vacuum Sealer 1 Unit 1,253.00 [ ] [ ] 65 Meat Slicer 1 Unit 2,150.00 [ ] [ ] 66 Digital Weighing Scale 1-2 Kg (with 2 Decimal Graduations) 5 Unit 270.00 [ ] [ ] 67 Plastic Rectangular Perforated Trays(12x16) 10 Unit 150.00 [ ] [ ] 68 Long Handled Ladles Stainless Steel 10 Pcs 159.00 [ ] [ ] 69 Heav Duty Bottom Pan Stainless Steel 5 Unit 2,083.00 [ ] [ ] 70 Blender Stainless Steel 5 Unit 1,298.00 [ ] [ ] 71 Washing Vat Funnel Stainless Steel 5 Unit 151.00 [ ] [ ] 72 Sharpener(knife) 5 Unit 130.00 [ ] [ ] 73 Food Tray 10 Pcs 359.00 [ ] [ ] 74 Salinometer 1 Unit 279.00 [ ] [ ] 75 Hydrometer 1 Unit 795.00 [ ] [ ] 76 Pitcher (stainless Steel) 1 Liter 1 Unit 295.00 [ ] [ ] 77 Mouth Mask 10 Pcs 50.00 [ ] [ ] 78 3 Stages Alkaline Water Filter Purifier 4 Unit 2,500.00 [ ] [ ] 79 Heavy Duty Blender 1 Unit 12,000.00 [ ] [ ] Pqf Page 1 Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Bidders May Quote For Any Or All Of The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated By Philippine Peso Shall Include All Taxes, Duties, And Or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, And Other Terms And Conditions Stated Herein. 7. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 8. The Item/s Shall Be Delivered According To The Requirements In The Technical Specifications. 9. Tesda Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 10. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Tesda Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. Name Of Business/company Signature Over Printed Name Office Telephone/fax No. Mobile No. Email Address Pqf Page 2

Details: Description Qty Unit Item Description Estimated Unit Price Total Unit Price 99.05 Cu.m Aggregate Base Course 1,300.00 128,765.00 100 Pcs 12mm X 6.0m Dsb 365.00 36,500.00 45 Pcs 16mm X 6.0m Dsb 665.00 29,925.00 550 Pcs 10mm X 6.0m Dsb 265.00 145,750.00 40 Pcs ½ Thk Marine Plywood 780.00 31,200.00 150 Pcs 2 X 3 X 10 Coco Lumber 125.00 18,750.00 50 Kgs Assorted Cw Nails 95.00 4,750.00 95 Kgs Tie Wire 110.00 10,450.00 126 Cu.m Washed Sand 1,450.00 182,700.00 259 Cu.m ¾ Gravel 1,450.00 375,550.00 6,015 Pcs #4 Chb 25.00 150,375.00 51 Cu.m Washed Sand 1,450.00 73,950.00 675 Pcs 10mm X 6.0m Dsb 265.00 178,875.00 20 Kgs Tie Wire 110.00 2,200.00 25 Cu.m Fine Sand 1,450.00 36,250.00 3 Pcs 2 X 6 X 1.2mm Tubular 2,450.00 7,350.00 5 Pcs 2 X 3 X 1.2mm C-purlins 1,050.00 5,250.00 6 Pcs 1 X 1 X 3.0mm Angle Bar 795.00 4,770.00 20 Pcs 3” Gi Pipe Sch 40 4,600.00 92,000.00 15 Pcs 10mm Dsb 265.00 3,975.00 4 Gals Epoxy Primer Gray 1,590.00 6,360.00 2 Gals Lacquer Thinner 695.00 1,390.00 30 Kgs 6011 Welding Rod 225.00 6,750.00 3 Pcs #4 Paint Brush 90.00 270.00 15 Pcs #4 Cutting Disc 125.00 1,875.00 5 Pcs #4 Grinding Stone 125.00 625.00 13.70 Lin.m 0.40mm X 1.22m X L.s Dura Ribs 389.00 5,329.30 8 Pcs 12” X 2.44m Fascia Cap 495.00 3,960.00 8 Pcs 0.40mm X 2.44m X 24” Spanish Gutter 650.00 5,200.00 5 Pcs 0.40 X 2.44m X 24” Spanish Flushing 650.00 3,250.00 3 Pcs 1/8 Drill Bit 185.00 555.00 1 Box 1/8 X ½ Blind Rivets 495.00 495.00 75 Pcs Teckscrew 2 ½ 7.00 525.00 2 Sets 0.80m X 2.10m Swing Glass Door With Complete Accessories 22,500.00 45,000.00 1 Set 0.70m X 2.10m Wooden Flush Door With Door Jamb And Door Knob 5,000.00 5,000.00 2 Sets 0.65m X 1.30m Awning Glass Window W/ Complete Accessories 12,500.00 25,000.00 1 Set 0.60m X 0.60m Sliding Glass Window W/ Complete Accessories 3,500.00 3,500.00 2 Sets 0.43m X 1.30m Awning Glass Window W/ Complete Accessories 9,500.00 19,000.00 9 Pcs Double Metal Furring 185.00 1,665.00 5 Pcs Hardilite 585.00 2,925.00 1 Box Blind Rivets 1/8 X ½ 495.00 495.00 5 Pcs Wall Angle 165.00 825.00 3 Pcs 1/8 Drill Bit 195.00 585.00 2 Gals Flat Latex 895.00 1,790.00 2 Gals Gloss Latex 895.00 1,790.00 8 Bags Skim Coat 650.00 5,200.00 1 Pc #4 Paint Brush 89.00 89.00 1 Pc #6 Paint Roller W/ Tray 145.00 145.00 4 Cans Tingitng Color 145.00 580.00 3 Mts #100 Sand Paper 35.00 105.00 2 Gals Flat Enamel 895.00 1,790.00 2 Gals Paint Thinner 695.00 1,390.00 2 Gals Quick Dry Enamel 895.00 1,790.00 65 Pcs 0.60m X 0.60m Floor Tiles 235.00 15,275.00 1 Cu.m Washed Sand 1,450.00 1,450.00 2 Packs Tile Grout 125.00 250.00 1 Pc Tile Cutter #4 390.00 390.00 1 Pc Panel Board #12 Branches 3,000.00 3,000.00 1 Pc Circuit Breaker #30 Ampere 595.00 595.00 1 Pc Circuit Breaker #20 Ampere 595.00 595.00 1 Pc Circuit Breaker #60 Ampere 850.00 850.00 1 Box Thhn Wire #3.5mm2 5,900.00 5,900.00 1 Box Thhn Wire #5.5mm2 6,900.00 6,900.00 2 Pcs Flush Type Outlet 3-gang 125.00 250.00 1 Pc Flush Type Switch 1-gang 145.00 145.00 2 Pcs Flush Type Switch 2-gang 185.00 370.00 5 Pcs Pvc Pipe Orange ¾ 145.00 725.00 100 Mtrs Flexible Hose ½ 22.00 2,200.00 5 Pcs Utility Box Orange 75.00 375.00 10 Pcs Junction Box Orange 75.00 750.00 5 Pcs Led Bulb 9 Watts 195.00 975.00 2 Pcs Electrical Tape Big 70.00 140.00 4 Pcs Pvc Elbow Orange ¾ 65.00 260.00 20 Boxes Thhn Wire #8.00mm2 79.00 1,580.00 1 Unit Water Closet W/ Complete Accessories 12,000.00 12,000.00 1 Unit Lavatory W/ Complete Accessories 5,000.00 5,000.00 3 Pcs #4 Pvc Pipe Sch. 520 450.00 1,350.00 3 Pcs #3 Pvc Pipe Sch. 520 350.00 1,050.00 2 Pcs 3 X 90 Elbow 80.00 160.00 3 Pcs 4 X 90 Elbow 80.00 240.00 1 Pc 4 Pvc Wye 80.00 80.00 1 Pc 3 Pvc Wye 80.00 80.00 1 Pc #3 Floor Drain 205.00 205.00 1 Pc #3 P-trap 80.00 80.00 30 Mts ½ Pe Pipe 25.00 750.00 2 Pcs ½ Pvc Pipe Blue 105.00 210.00 2 Pcs ½ Pvc Elbow 45.00 90.00 1 Pc #4 Clean Out 60.00 60.00 1 Pc ½ Pe Tee 100.00 100.00 2 Pcs ½ Faucet 250.00 500.00 257 Pcs #4 Chb 25.00 6,425.00 20 Pcs 10mm X 6.0m Dsb 265.00 5,300.00 2 Kgs Tie Wire 95.00 190.00 1 Cu.m Washed Sand 1,450.00 1,450.00 1 Cu.m ¾ Gravel 1,450.00 1,450.00 1 Cu.m Fine Sand 1,450.00 1,450.00

Details: Description For Purchase Of Medical And Laboratory Supplies -pgh(0286) Item No. Qty Unit Description Of Articles Of Materials 1 15 Bottle Acetone 15ml 2 900 Bot Alcohol 500ml 3 3 Kit Ambu Bag - Infant 4 3 Kit Ambu Bag - Pedia 5 3 Kit Ambu Bag - Adult 6 5 Set Anesthesia Breathing Circuit-adult 7 5 Set Anesthesia Breathing Circuit - Infant 8 5 Set Anesthesia Breathing Circuit - Pedia 9 5 Pack Applicator Stick 500's 10 25 Pc Arm I.v Splint - Adult 11 25 Pc Arm I.v Splint - Infant 12 30 Pc Arm I.v Splint - Pedia 13 20 Pc Arm Sling - Large 14 20 Pc Arm Sling - Medium 15 20 Pc Arm Sling - Small 16 20 Pc Arm Sling - X-large 17 10 Bot Baby Oil 125ml 18 10 Pc Bed Pan, Plastic 19 400 Pc Blood Set 20 10 Pc Bp Rubber Bulb - Adult 21 200 Pc Brown Paper Bag 22 5 Pack Bouffant Cap 100's 23 3 Pc Cadaver Bag - Adult (l) 24 3 Pc Cadaver Bag - Adult (xl) 25 3 Pc Cadaver Bag - Pedia 26 5 Pc Cervical Collar - Large 27 10 Pc Cervical Collar - Medium 28 5 Pc Cervical Collar - Small 29 10 Pc Clavicular Brace - Large 30 10 Pc Clavicular Brace - Medium 31 10 Pc Clavicular Brace - Small 32 6 Pc Colostomy Bag Set Size 45 33 6 Pc Colostomy Bag Set Size 57 34 6 Pc Colostomy Bag Set Size 70 35 1 Pc Commode Chair 36 20 Pack Connecting Tube Pool Drain 37 10 Pc Connecting Tube Yankauer 38 200 Pc Cord Clamp Disposable Plastic 39 5 Pack Cotton Buds Plastic - Blue 100 Tips 40 5 Pack Cotton Pledget Wooden Stick 100's 41 70 Roll Cotton Roll 400g 42 1,500 Pc Disposable Electrodes - Adult 43 150 Pc Disposable Electrodes - Pediatric 44 150 Pc Disposable Razor 45 40 Roll Ecg Paper 1 Channel 50x30x16mm 46 40 Roll Ecg Paper 3 Channel 80x20mm 47 30 Pc Epidural Catheter G-16 48 30 Pc Epidural Catheter G-18 49 30 Pack Eye Pads 8cmx6cm 50 500 Box Face Mask Earloop 50's 51 90 Pc Face Mask Kn95 52 100 Pc Foley Cath 3way F18 53 270 Pc Foley Catheter 2way Fr18 54 15 Pc Foley Catheter 2way Fr10 55 15 Pc Foley Catheter 2way Fr12 56 15 Pc Foley Catheter 2way Fr14 57 300 Pc Foley Catheter 2way Fr16 58 10 Pc Foley Catheter 2way Fr8 59 15 Bot Formalin Solution 1l 60 300 Box Glucose Strip 61 25 Gal Glutaraldehyde 62 3 Pc Guide Wire - Adult 63 3 Pc Guide Wire - Infant 64 3 Pc Guide Wire - Pedia 65 3 Pc Guided Airway #001 66 3 Pc Guided Airway #002 67 3 Pc Guided Airway #003 68 3 Pc Guided Airway #004 69 1 Pc Hot Water Bag 70 50 Bot Hydrogen Peroxide Vol 10 Red 60cc 71 50 Bot Hydrogen Peroxide Vol 20 Blue 120cc 72 1 Roll Latex Tubing 1/4 X 1/8 50ft 73 1 Roll Latex Tubing 1/8 X 1/32 50ft 74 500 Sachet Lubricating Jelly 5g 75 150 Pc Medicine Cup 30ml 76 250 Pc Nasal Oxygen Cannula Mask - Infant 77 125 Pc Nasal Oxygen Cannula Mask - Neonate 78 250 Pc Nasal Oxygen Cannula Mask - Pedia 79 350 Pc Nasal Oxygen Cannula Prong - Infant 80 350 Pc Nasal Oxygen Cannula Prong - Neonate 81 250 Pc Nasal Oxygen Cannula Prong - Pedia 82 350 Pc Nasal Oxygen Cannula Mask - Adult 83 200 Pc Nasal Oxygen Cannula Prong - Adult 84 10 Pc Nasogastric Tube Fr-10 85 10 Pc Nasogastric Tube Fr-12 86 10 Pc Nasogastric Tube Fr-14 87 50 Pc Nasogastric Tube Fr-16 88 10 Pc Nasogastric Tube Fr-18 89 50 Pc Nasogastric Tube Fr-5 90 5 Pc Nasogastric Tube Fr-8 91 200 Pc Nebulizer Kit W/ Mask Infant 92 200 Pc Nebulizer Kit W/ Mask Pedia 93 150 Pc Nebulizer Kit W/ Mask Adult 94 200 Pc Nebulizer Kit W/ Mouthpiece Adult 95 20 Pc Non Rebreathing Mask - Adult 96 25 Pc Non Rebreathing Mask - Infant 97 10 Pc Non Rebreathing Mask - Pedia 98 25 Pc Peak Flow Mouth Piece 99 30 Pc Penrose Drain Tubing 1/2" 100 30 Pc Penrose Drain Tubing 1/4" 101 3 Jar Petroleum Jelly 100g 102 2,000 Pc Povidone Iodine Scrub 103 15 Gal Povidone Iodine 10% Gallon 104 15 Gal Povidne Iodine 7.5% Gallon 105 1 Pack Soda Lime 17kls 106 30 Pack Soft Drain Flat 107 800 Pack Soluset Infusion Set 108 300 Pc Sterigage 109 250 Pc Sterigage 1/4 X 4 110 90 Pc Straight Catheter Fr 12 111 100 Pc Straight Catheter Fr 14 112 30 Pc Straight Catheter Fr 8 113 40 Pc Suction Catheter Fr 10 114 40 Pc Suction Catheter Fr 12 115 15 Pc Suction Catheter Fr 14 116 40 Pc Suction Catheter Fr 16 117 40 Pc Suction Catheter Fr 8 118 200 Pc Suction Connecting Tube 119 35 Roll Thermal Paper Ultrasound A6 Size 4.1x5.8 120 2 Bot Thora Bottleglass 1l 121 3 Pc Thoracic Catheter F24 122 3 Pc Thoracic Catheter F30 123 3 Pc Thoracic Catheter F32 124 3 Pc Thoracic Catheter F36 125 10 Box Tongue Depressor 126 4 Pc Tracheal Tube Fr 2 Uncuffed 127 5 Pc Tracheal Tube Fr 2.5 Uncuffed 128 5 Pc Tracheal Tube Fr 3 Uncuffed 129 5 Pc Tracheal Tube Fr 3.5 Uncuffed 130 5 Pc Tracheal Tube Fr 4 Uncuffed 131 5 Pc Tracheal Tube 4.5 Uncuffed 132 5 Pc Tracheal Tube 5 Cuffed 133 5 Pc Tracheal Tube 5.5 Cuffed 134 5 Pc Tracheal Tube 6 Cuffed 135 5 Pc Tracheal Tube 7 Cuffed 136 10 Pc Tracheal Tube 7.5 Cuffed 137 5 Pc Tracheal Tube 8 Cuffed 138 5 Pc Tracheal Tube 8.5 Cuffed 139 1 Pc Ttracheostomy Tube Cuffed W/ Inner Cannula 6fen 140 1 Pc Tracheostomy Tube Cuffed W/ Inner Cannula 8fen 141 50 Bot Triple Distilled Water 1l Plastic 142 3 Gal Ultrasound Gel 1 Gal 143 300 Pc Underpads 144 200 Pc Urine Bag Adult 145 100 Pc Urine Specimen Container 60ml 146 5 Box Weebag 100s 147 40 Pc Whattman Filter Paper 148 450 Pc Wristlet/id Band-pedia 149 450 Pc Wristlet/id Band-adult 150 250 Pc Wristlet/id Band-infant

Details: Description Item No. Item And Description Qty/unit 1. Cartolina, Assorted Colors 5 Packs 2. Paper, Multicopy, 80gsm, Size: 210mm X 297mm 1 Ream 3. Paper, Multicopy, 80gsm, Size: 216mm X 330mm 1 Ream 4. Paper, Multi-purpose (copy) A4, 70 Gsm 5 Reams 5. Paper, Multi-purpose (copy) Legal, 70 Gsm 5 Reams 6. Glue, All Purpose, Gross Weight: 240 Grams Min 1 Jar 7. Staple Wire, For Heavy Duty Staplers, (23/13) 1 Box 8. Tape, Electrical, 18mm X 16m Min 1roll 9. Tape, Masking, Width: 24mm (±1mm) 1 Roll 10. Tape, Masking, Width: 48mm (±1mm) 1 Roll 11. Tape, Packaging, Width: 48mm (±1mm) 2 Rolls 12. Tape, Transparent, Width: 24mm (±1mm) 2 Rolls 13. Twine, Plastic, One (1) Kilo Per Roll 1 Roll 14. Battery, Dry Cell, Aa, 2 Pieces Per Blister Pack 6 Packs 15. Battery, Dry Cell, Aaa, 2 Pieces Per Blister Pack 6 Packs 16. File Tray, Metal, 3 Layers 2 Pieces 17. Puncher, Paper, Non-heavy Duty 1 Piece 18. Eraser, Plastic/rubber, For Pencil Draft/writing 1 Piece 19. Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 12 Pieces 20. Sign Pen, Blue, Liquid/gel Ink, 0.5mm Needle Tip 12 Pieces 21. Sign Pen, Red, Liquid/gel Ink, 0.5mm Needle Tip 12 Pieces 22. Extension Wire, 5 Gang With Switch 1 Unit 23. Highlighter, Pen, Assorted Color 1 Pack 24. Paper Photo, Sticker, Glossy, 8.5" X 13" 4 Packs 25. Stamp Pad Ink, Purple Or Violet 4 Bottles 26. Note Pad, Stick On, 50mm X 76mm (2" X 3") Min 15 Pads 27. Note Pad, Stick On, 76mm X 100mm (3" X 4") Min 10 Pads 28. Paper, Multicopy, 80gsm, Size: 210mm X 297mm 5 Reams 29. Paper, Multicopy, 80gsm, Size: 216mm X 330mm 10 Reams 30. Record Book, 300 Pages, Size: 214mm X 278mm Min 1 Book 31. Record Book, 100 Pages, Size: 214mm X 278mm Min 6 Books 32. Glue, All Purpose, Gross Weight: 240 Grams Min 2 Jars 33. Staple Wire, For Heavy Duty Staplers, (23/13) #35 4 Boxes 34. Tape, Masking, Width: 24mm (±1mm) 5 Rolls 35. Tape, Masking, Width: 48mm (±1mm) 5 Rolls 36. Tape, Packaging, Width: 48mm (±1mm) 5 Rolls 37. Tape, Transparent, Width: 24mm (±1mm) 5 Rolls 38. Tape, Transparent, Width: 48mm (±1mm) 5 Rolls 39. Ruler, Plastic, 450mm (18"), Width: 38mm Min 3 Pieces 40. Correction Tape, Film Base Type, Ul 6m Min 5 Pieces 41. Marker, Permanent, Bullet Type, Black 5 Pieces 42. Marker, Permanent, Bullet Type, Blue 5 Pieces 43. Marker, Permanent, Bullet Type, Red 5 Pieces 44. Paper Clip, Vinyl/plastic Coat, Length: 32mm Min 10 Boxes 45. Paper Clip, Vinyl/plastic Coat, Length: 48mm Min 10 Boxes 46. Stamp Pad, Felt, Bed Dimension: 60mm X 100mm Min 1 Piece 47. Cutter Blade, For Heavy Duty Cutter 2 Pieces 48. Dating And Stamping Machine, Heavy Duty 2 Pieces 49. Staple Remover, Plier-type 3 Pieces 50. Stamp Pad Ink, Purple Or Violet 1 Bottle 51. Note Pad, Stick On, 76mm X 76mm (3" X 3") Min 2 Pads 52. Note Pad, Stick On, 50mm X 76mm (2" X 3") Min 2 Pads 53. Paper, Multi-purpose (copy) A4, 70 Gsm 10 Reams 54. Paper, Multi-purpose (copy) Legal, 70 Gsm 10 Reams 55. Toilet Tissue Paper 2-plys Sheets, 150 Pulls 3 Packs 56. Glue, All Purpose, Gross Weight: 240 Grams Min 1 Jar 57. Tape, Transparent, Width: 24mm (±1mm) 1 Roll 58. Clip, Backfold, All Metal, Clamping: 19mm (-1mm) 5 Boxes 59. Clip, Backfold, All Metal, Clamping: 50mm (-1mm) 5 Boxes 60. Correction Tape, Film Base Type, Ul 6m Min 3 Pieces 61. Data File Box, Made Of Chipboard, With Closed Ends 5 Pieces 62. Folder, Fancy, For Legal Size Documents 1 Bundle 63. Paper Clip, Vinyl/plastic Coat, Length: 32mm Min 3 Boxes 64. Paper Clip, Vinyl/plastic Coat, Length: 48mm Min 3 Boxes 65. Puncher, Paper, Heavy Duty, With Two Hole Guide 1 Piece 66. Stapler, Standard Type, Load Cap: 200 Staples Min 2 Pieces 67. Scissors, Symmetrical, Blade Length: 65mm Min 2 Pieces 68. Tape Dispenser, Table Top, For 24mm Width Tape 1 Piece 69. Toner Cart, Hp Ce285a (hp85a), Black 2 Carts 70. Clearbook, 20 Transparent Pockets, For Legal Size 3 Pieces 71. Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 5 Pieces 72. Sign Pen, Blue, Liquid/gel Ink, 0.5mm Needle Tip 10 Pieces 73. Arc File 5 Pieces 74. Highlighter, Pen, Assorted Color 1 Pack 75. Folder, Oridinary, Short Size 1 Box 76. Paper Photo, Sticker, Glossy, 8.5" X 13" 2 Packs 77. Fastener, Metal, 70mm Between Prongs 1 Box 78. File Tray, Metal, 3 Layers 3 Pieces 79. Pen Holder, Steel Mesh 2 Pieces 80. Stapler, Long Arm 1 Piece 81. Staple Remover, Plier-type 1 Piece 82. Stick-rite Notarial Seal With Adhesive #23-2" 30 Packs 83. Staple Wire, Standard, (26/6) 1 Box 84. Ink Cart, Epson C13t00v100 (003 ), Black 5 Carts 85. Ink Cart, Epson C13t00v100 (003 ), Cyan 3 Carts 86. Ink Cart, Epson C13t00v100 (003 ), Magenta 3 Carts 87. Ink Cart, Epson C13t00v100 (003 ), Yellow 3 Carts 88. Extension Wire, 5 Gang With Switch 1 Unit Alcohol, Ethyl, 68%-70%, Scented, 500ml (-5ml) 6 Bottles Stamp Pad Ink, Purple Or Violet 1 Bottle Note Pad, Stick On, 50mm X 76mm (2" X 3") Min 3 Pads Note Pad, Stick On, 76mm X 100mm (3" X 4") Min 3 Pads Paper, Multicopy, 80gsm, Size: 210mm X 297mm 15 Reams Paper, Multicopy, 80gsm, Size: 216mm X 330mm 15 Reams Record Book, 300 Pages, Size: 214mm X 278mm Min 8 Books Record Book, 500 Pages, Size: 214mm X 278mm Min 3 Books Toilet Tissue Paper 2-plys Sheets, 150 Pulls 5 Packs Battery, Dry Cell, Aa, 2 Pieces Per Blister Pack 3 Packs Battery, Dry Cell, Aaa, 2 Pieces Per Blister Pack 3 Packs Glue, All Purpose, Gross Weight: 240 Grams Min 2 Jars Staple Wire, For Heavy Duty Staplers, (23/13) 2 Boxes Tape, Masking, Width: 24mm (±1mm) 5 Rolls Tape, Masking, Width: 48mm (±1mm) 5 Rolls Tape, Packaging, Width: 48mm (±1mm) 3 Rolls Tape, Transparent, Width: 24mm (±1mm) 3 Rolls Tape, Transparent, Width: 48mm (±1mm) 5 Rolls Ruler, Plastic, 450mm (18"), Width: 38mm Min 2 Pieces Air Freshener, Aerosol, 280ml/150g Min 5 Cans Correction Tape, Film Base Type, Ul 6m Min 10 Pieces Envelope, Documentary, For Legal Size Document 1 Box Marker, Permanent, Bullet Type, Black 3 Pieces Marker, Permanent, Bullet Type, Blue 3 Pieces Paper Clip, Vinyl/plastic Coat, Length: 32mm Min 2 Boxes Paper Clip, Vinyl/plastic Coat, Length: 48mm Min 2 Boxes Pencil, Lead, W/ Eraser, Wood Cased, Hardness: Hb 1 Box Puncher, Paper, Heavy Duty, With Two Hole Guide 1 Piece Philippine National Flag, 100% Polyester 15 Pieces Clearbook, 20 Transparent Pockets, For Legal Size 5 Pieces Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 6 Pieces Sign Pen, Blue, Liquid/gel Ink, 0.5mm Needle Tip 10 Pieces Sign Pen, Red, Liquid/gel Ink, 0.5mm Needle Tip 3 Pieces Arc File 5 Pieces Highlighter, Pen, Assorted Color 2 Packs Fastener, Plastic 2 Boxes Folder, Expanding, Legal Size 10 Pieces Folder, Oridinary, Short Size 1 Box Folder, Oridinary, Legal Size 2 Boxes Paper, 70 Gsm, 8.5" X11", Short Size (bondpaper Subs. 20) 10 Reams Paper, Special, Size: 8.5" X13" 1 Box Paper, Special, Size: 8.5" X11" 1 Box Paper Photo, Sticker, Glossy, 8.5" X 13" 3 Packs Paper Photo, Sticker, Glossy, 8.5" X 11" 3 Packs Push Pin, Flat Type, 100/box 3 Boxes Corkboard, Sidings: Aluminum Frame, 2x3 Ft. 1 Board Dispenser, Tape Dispenser, With Rubber Sole 1 Piece Feather Duster 3 Pieces File Tray, Metal, 3 Layers 3 Pieces Paper Cutter, Metal Base, 15x18 1 Piece Pen Holder, Steel Mesh 2 Pieces Double Sided Tape 1" 5 Pieces Brother Ink Btd60 Bk (black) 10 Bottles Brother Ink Bt 5000 Cyan 5 Bottles Brother Ink Bt 5000 Magenta 5 Bottles Brother Ink Bt 5000 Yellow 5 Bottles Note Pad, Stick On, 76mm X 100mm (3" X 4") Min 2 Pads Note Pad, Stick On, 76mm X 76mm (3" X 3") Min 2 Pads Paper, Multi-purpose (copy) A4, 70 Gsm 2reams Paper, Multi-purpose (copy) Legal, 70 Gsm 2reams Paper, 80 Gsm, 8.5" X11", Short Size (bondpaper Subs. 24) 2reams Record Book, 500 Pages, Size: 214mm X 278mm Min 1 Book Battery, Dry Cell, Aa, 2 Pieces Per Blister Pack (alkaline) 2 Packs Battery, Dry Cell, Aaa, 2 Pieces Per Blister Packn (alkaline) 2 Packs Tape, Masking, Width: 48mm (±1mm) 3 Rolls Tape, Transparent, Width: 48mm (±1mm) 3 Rolls Marker, Whiteboard, Black, Felt Tip, Bullet Type 3 Pieces Marker, Permanent, Bullet Type, Black 3 Pieces Ink Cart, Epson C13t664100 (003), Black 5 Carts Ink Cart, Epson C13t664200 (003), Cyan 2 Carts Ink Cart, Epson C13t664300 (003), Magenta 2 C Arts Ink Cart, Epson C13t664400 (003), Yellow 2 Carts External Hard Drive, Portable, 1tb, Usb 3.0 1 Unit Ink Brother Bt5000c Cyan 3 Bottles Ink Brother Bt5000y Yellow 3 Bottles Ink Brother Bt 5000m Magenta 3 Bottles Ink Brother Btd60bk Black 3 Bottles Brother Ink Btd60 Bk (black) 3 Bottles Brother Ink Bt 5000 Cyan 3 Bottles Brother Ink Bt 5000 Magenta 3 Bottles Brother Ink Bt 5000 Yellow 3 Bottles Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 4 Pieces Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 3 Pcs. Paper, Multi-purpose (copy) A4, 70 Gsm 5 Reams Paper, Multi-purpose (copy) Legal, 70 Gsm 2 Reams Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 11 Pcs. Paper, Multi-purpose (copy) A4, 70 Gsm 3 Reams Paper, Multicopy, 80gsm, Size: 210x297mm 12 Reams Paper, Multicopy, 80gsm, Size: 216x330mm 13 Reams Paper, Multi-purpose (copy) A4, 70gsm 12 Reams Marker, Whiteboard, Black, Felt Tip, Bullet Type 10 Pieces Marker, Whiteboard, Blue, Felt Tip, Bullet Type 10 Pieces Marker, Whiteboard, Red, Felt Tip, Bullet Type 10 Pieces Rubber Band, 70mm Min Lay Flat Length (#18) 1 Box Ink Cart, Epson C13t664100 (t6641), Black 5 Carts Int Cart, Epson C13t664200 (t6642). Cyan 4 Carts Int Cart, Epson C13t664300 (t6643). Magenta 4 Carts Int Cart, Epson C13t664300 (t6644). Yellow 4 Carts Arc File (marron/red) 1 Piece Staple Wire, Standard, (26/6) 1 Box

Description: Restricted invitation to tender with public competition Vob/a electrical installation 01.The relevant rules, guidelines and provisions in their latest version apply to the execution of the system. All VDE regulations that must be applied to this construction project. ... More01.The relevant rules, guidelines and provisions in their latest version apply to the execution of the system. All VDE regulations that must be applied to this construction project. Other relevant guidelines and regulations, such as: - The requirements of the building inspectorate - The requirements of the building regulations office - The requirements of the trade inspectorate - The requirements of the local fire brigade - The building police and official regulations - Those of the fire protection office - The recommendation of the building trade association - The guidelines and regulations of Deutsche Post AG Fo and Ftz - The specific requirements of the building permit - The accident prevention regulations - Afa - The recommendation of the office for occupational safety - Avb - Electrical regulations - Lbo - State building regulations with all partial regulations - Vdew, Zvei, Zveh - Vds - The recommendation of the association of property insurers - Tab - Technical connection conditions for medium and low voltage systems of the responsible Evu. All regulations must be conscientiously observed and followed. 02.As a general rule, only overview plans with the system devices are provided. The cable dimensions must be selected according to the system functions and special features of the manufacturer. 03.The upstream overcurrent and short-circuit devices must be adapted to the actual conditions and corrected as appropriate. The person who created the system is liable for its accuracy. Particular attention must be paid to an even load distribution across the three external conductors. The evenness must be verified by measurements. 04.The products offered that have the addition "or equivalent" serve solely to determine the technical requirements to be met by these materials. It is up to the bidder to offer other products that meet these quality standards. 05.There are no lockable rooms available on site for the accommodation of workers, the storage of materials and tools, etc. 06.If the work coincides with that of other contractors, the closest possible contact must be maintained with these companies to ensure that the work is carried out smoothly. All routings must be precisely coordinated with the companies responsible for the building services systems. 07.Samples of all essential components, particularly switches, sockets, lights, ducts, platforms, etc. must be submitted to the construction management without being asked to do so before the order is placed. The final selection is made by the construction management. 08.Before the distribution boards are built, view and sectional drawings of the planned design must be submitted to the construction management for approval. 09.The bidder undertakes to appoint an assembly manager before work begins, who will accept instructions from the construction management and the client at construction meetings and ensure that they are carried out. This assembly manager must remain the same for the entire construction period. If this contact person changes, all costs for damage or inconvenience caused to the client as a result will be deducted from the final invoice. 10.All necessary daily wage work will be billed according to the hourly rates listed in the separate appendix. If the entry is not made, the wage rate will be set by the construction management. Daily wage work will only be approved if it has been agreed with the construction management beforehand. This work may only be carried out on the instructions of the construction management. Daily wage records must be presented to the construction management daily. 11.The measurements must be carried out in a time that ensures that the work can be clearly identified. The measurements must be drawn up in order by circuit. The measurement check must be requested in good time. 12.After completion of the system, the contractor must prepare valid inventory plans with the final status of the installation. The inventory plans must contain all the necessary details such as distribution boxes, circuit designations, etc. The completeness and accuracy must be confirmed from then on by means of a stamp, signature and the inscription "inventory plan". The contractor or his representative only checks the number of plans for completeness. The inventory plans are to be delivered as follows: 2 copies in paper form, folded, in folders, laid out in color 1 copy in digital form on a data carrier All audit documents are to be handed over correctly in a professional form. Handwritten sketches or entries are not accepted! Documentation documents Structure and content of the documentation documents: Cover sheet (in transparent cover) - Project name and address - Trade name - Name and address of the executing company - Name and address of the specialist planner Table of contents (in transparent cover) - Structure according to the following specification (to be separated by index sheets) 1. General 1.1 Protocol for instruction of operating personnel 1.2 List of participants in the inventory acceptance 1.3 List of participants in the functional acceptance 2. Certificates 2.1 Approval certificates 2.2 Certificates of compliance with VDE and DIN standards 2.3 Certificate according to BGV A3 2.4 TÜV acceptance 2.5 Proof of uniform phase loading 3. Functional descriptions 3.1 Functional description of complex systems 4. Measurement reports 4.1 All measurement reports according to DIN VDE 0100, Part 610 4.2 Measurement report for antenna system 4.3 Measurement report for IT cabling 5. Operation and maintenance 5.1 Operating instructions 5.2 Maintenance instructions 6. Manufacturer documents 6.1 Manufacturer brochures (labeling of all components used) 6.2 Equipment file (contains make list and spare parts list of all components used) 7. Diagrams 7.1 Installation diagrams 7.2 Block diagrams 8. Distribution/central documents 8.1 Functional description of the system 8.2 Marshalling plans 8.3 Terminal assignment plans for distributors 9. Revision plans 9.1 Installation plans, scale 1:50, specifying all operating resources with designations in accordance with the distribution documents. An operating manual and a circuit diagram must be attached to each technical center. The diagram must show the structure, function and performance data. 13.To specify the work carried out, the architect and the contractor carry out a joint acceptance of the electrical systems. This acceptance is not a test within the meaning of the VDE regulations, but a test for completeness of the service in accordance with Vob. For this purpose, it is necessary that proof of the implementation of the tests required by VDE is kept in the form of a test report. The personnel costs for participation in acceptance tests are to be included in the unit prices. 14. Partial commissioning, earlier use or final invoice do not replace a final acceptance. This can only take place after the entire work has been completed. Defects identified during acceptance must be remedied within a period to be specified more precisely, without further notice. 15. The contractor is liable for all damage caused by non-compliance with the aforementioned offer and order conditions. He is obliged to inform himself about the other tradesmen involved in the construction and their work and to report any defects that could have an impact on the execution of his services to the construction management in writing before the electrical systems are carried out. The contractor is liable for the completeness of a system component until the final acceptance. 16. References must be included with the offer or it must be stated in a list with amounts that the bidder has already installed systems of the same or larger size several times. 17. If this proof is not included, the offer will be automatically excluded. C. Additional preliminary remarks on the electrical systems 01. Within the suspended ceilings, the cables must be properly fastened with plastic clamps or plastic holders at least every 60 cm. Cable trays are only installed where the frequency of cables justifies this. 02. All cable feedthroughs through metal parts, webs, profile rails, etc. must be provided with PVC grommets. All costs for this must be included in the unit price, as must all necessary drilling. 03. All dimensions for the arrangement of the devices, such as switches, sockets, lights, etc. must be determined with the construction management before installation. 04.Multiple sockets must be designed as a combination with combination cover plates. 05.All built-in devices, such as switches and sockets, etc. must be fastened in the device boxes with screws. Claw fastening is not permitted. 06.Particular attention must be paid to the use of flame-retardant switch boxes, switch terminal boxes and junction boxes in hollow walls, etc. All of these boxes must be calculated accordingly in the Lv, even if this is not specifically mentioned, including the creation of the installation openings. 07.The cables for the building services trades, RWA systems, etc. must be laid according to the instructions of the specialist companies. A cable dimension and position plan must be requested from the specialist companies at an early stage so that these cables can be laid as part of the overall installation. 08.Socket holes in exposed brickwork must be milled cleanly in coordination with the construction management. Damage is the responsibility of the person responsible. 09.All electrical cables must be flame-retardantly coated or sheathed. Only cables from certain brands that have a test certificate for these properties may be used. The bidder must provide proof and present it without being asked to do so before installation begins. If this is neglected or if cables are not laid accordingly, the bidder must bear all costs for replacing the cables. 10.As required by the local fire protection officer, the fire brigade, the city or the relevant authority, appropriate fire barriers must be installed for breakthroughs and cable routes as a fire protection measure. Acceptance must be arranged with the fire protection officer in good time before the ceilings are closed. An acceptance certificate must be presented to the construction management without being asked to do so. All costs for this must be included in the unit prices. 11.The current MLAR must be taken into account. 12. All cable trays, risers and cable ducts must be designed with appropriate dividers to accommodate both high and low voltage systems. 13. In schools, all switches and sockets must be fitted with screwed covers in accordance with school building guidelines. 14. E30 and E90 cables may only be laid using type-approved, tested fastening material for individual installation and with appropriately approved cable tray systems for collective installation. 15. All sockets must be clearly and permanently marked with circuit numbers on the support frame. For surface-mounted sockets, the marking must be attached to the housing using a labelling device. 16. All requirements for the electrical installation listed in the preliminary remarks must be included in the EPs. There is no separate remuneration for this service. Since there are dependencies between the trades, instructions for the completion of services which are, for example, mandatory requirements for the start of a subsequent trade, must be implemented immediately. Any short-term changes to the construction process must be followed immediately. Flexible action with fast reaction times and short arrival and departure times is essential for this construction project. In view of the short execution time, this also applies to instructions from the construction management to carry out work at short notice in order not to hinder or delay subsequent trades and the overall construction process. Any additional work resulting from this must be included in the unit prices. D. General information on the service description Each item shown is to be understood as a finished job and as a service that complies with the regulations, is properly crafted and is ready for use and operation, including all ancillary services. - Additional technical contract conditions - Electrical installation DIN 18 382 The general technical regulations (ATV) for construction work of the Vob, Part C, become part of the contract. Measurements and quantity compilations as the basis for calculation are only to be prepared on forms from the engineering office. The forms are provided free of charge and must be requested in good time. The presence of a contractor employee with technical and local knowledge during the acceptance of the high and low current technical systems, in accordance with the construction certificate and the applicable building inspection regulations, by a building inspector-approved expert, is covered by the unit prices. The contractor must coordinate the provision of his services with - previous and subsequent - trades that technically affect his own services, so that his own services and his own execution dates are carried out correctly in terms of the detailed execution steps and functional accuracy. The usual work sequences, technical dependencies and individual steps of partial services that are separated in time are taken into account in the offer calculation. - General description of the measure - 1. The construction measure is the extension of the fire station with 4 vehicle parking spaces and the required social rooms. The existing building will be partially demolished and rebuilt. For the vehicle hall, the additional base, including the foundation and upstands, will be built using solid construction. The social wing on the ground floor and the building dividing wall to the hall will be rebuilt using solid construction. The upper floor of the social wing and the roof and walls of the vehicle hall will be made of wood. The "sports center" part of the existing building will be retained and in use during the construction period. Fire service access roads, the access to the depot (the fire service's location during construction) and escape and rescue routes must be kept clear throughout the entire construction phase, see attachment. Everything else, especially exceptions, must be agreed with the construction management. 2. During the project, some work may be carried out by municipal yard employees and firefighters themselves. This may result in various items being omitted altogether or quantities in parts of various items being reduced. The omission or reduction in quantities of these items does not entitle the contractor to make claims for lost profits or claims for an increase in unit prices. The price inquiry or requirement items must be filled in without fail, as it is possible that these items will also be carried out. The bidder acknowledges these preliminary remarks by signing the list of services. 3. The material costs and wage cost components requested in the individual items must be filled in without fail. Reference is made to the Vob/a (§25 ff). Here, if various items are omitted, the order may also be for the delivery of the material alone. 4. The construction site toilet and the break rooms must be provided by each contractor. Energy, water and electricity are provided free of charge. 5. A construction meeting is held weekly with all contractors in the community center/construction site. The company representatives who are currently working on the construction site and who will begin work in the next three weeks are required to attend and coordinate construction progress. Any costs must be included in the EPs. 6. Upon acceptance of the order, the contractor recognizes the dates stated in the preliminary remarks and the construction schedule as binding and will, if necessary, carry out necessary work outside of working hours at no extra cost so as not to jeopardize the deadlines for subsequent work. The contractor undertakes to provide the appropriate number of workers based on the amount of work and working days. 7. The contractually binding partial deadlines are set out in the construction schedule. 8.The work advertised must be carried out in parts in accordance with the progress of the construction. This does not give the contractor any right to make additional claims. 9.The disposal of rubbish and debris must be carried out every two days at most, analogous to the work steps. Each contractor is responsible for this himself. 10.All further details can be found in the list of services. 11.Contrary to DIN 1961 Vob Part B § 13 (4), the limitation period for claims for defects is set at five years. 12.Services that exceed the contract amount require prior written approval, otherwise no payment will be made! Accordingly, supplementary offers must be approved in good time (at least three weeks) before execution. 13.Daily construction reports must be kept. The forms from "Zweckform - Daily Construction Reports No. 177" or equivalent must be used as a template. These must be presented to the construction supervisor every 2-3 days for signature and countersignature. The work carried out, the number of workers and the hours worked must be entered here. 14. Depending on the trade, all inventory and inspection documents must be enclosed with the final invoice in duplicate in paper form and digitally (copied onto a CD or data storage device): Final payment will only be approved after the documents have been submitted. 15. By signing the list of services, the bidder acknowledges these preliminary remarks.

Description: Restricted invitation to tender with public participation competition Vob/a heating-ventilation-sanitary 1. The construction project involves the new extension of the fire station with 4 vehicle parking spaces and the necessary social rooms. The existing building will be partially demolished and rebuilt. The base to be added to the vehicle hall, including the foundation and upstands, will be built using solid construction. The social wing on the ground floor and the building dividing wall to the hall will be newly built using solid construction. The upper floor of the social wing and the roof and walls of the vehicle hall will be made of wood. The "sports center" part of the existing building will be retained and in use during the construction period. Fire service access roads, the access to the building yard (fire service location during construction) and escape and rescue routes must be kept clear throughout the entire construction phase, see appendix. Everything else must be agreed with the construction management, particularly exceptions. 2. During the project, some work may be carried out by building yard employees and fire service members on their own. This may result in various items being omitted altogether or quantities in parts of various items being reduced. The omission or reduction in quantities of these items does not entitle the contractor to make claims for lost profits or claims for an increase in unit prices. The price inquiry or requirement items must be filled in without fail, as it is possible that these items will also be implemented. The bidder acknowledges these preliminary remarks by signing the list of services. 3. The material costs and wage cost shares requested in the individual items must be filled in without fail. Reference is made to the Vob/a (§25 ff). Here, if certain items are no longer required, the order may be for just the delivery of materials. 4. Each contractor must provide their own construction site toilets and break rooms. Energy, water and electricity are provided free of charge. 5. A weekly construction meeting is held with all contractors in the community center/construction site. Company representatives who are currently working on the construction site and who will begin work in the next three weeks are required to attend and coordinate construction progress. Any costs must be included in the EPs. 6. Upon acceptance of the order, the contractor acknowledges the dates stated in the preliminary remarks and the construction schedule as binding and will, if necessary, carry out any work required outside of working hours at no extra cost so as not to jeopardize the dates for subsequent work. He undertakes to provide the number of workers according to the amount of work and the working days. 7. the contractually binding partial deadlines are set out in the construction schedule. 8. the work advertised must be carried out in partial deliveries in accordance with the construction progress. This does not give the contractor any right to assert additional claims. 9. waste and rubble disposal must be carried out every two days at most, analogous to the work steps. Each contractor is responsible for this himself. 10. all further details can be found in the list of services. 11. contrary to DIN 1961 Vob Part B § 13 (4), the limitation period for claims for defects is set at five years. 12. services that exceed the contract value require prior written approval, otherwise no payment will be made! Accordingly, supplementary offers must be approved in good time (at least three weeks) before execution. 13. daily construction reports must be kept. The forms from "Zweckform - Construction Daily Reports No. 177" or similar are to be used as templates. These are to be presented to the construction supervisor every 2-3 days for signature and countersignature. The work carried out, the number of workers and the hours worked are to be entered here. 14.Depending on the trade, all inventory and audit documents are to be enclosed with the final invoice in duplicate in paper form and digitally (copied onto a CD or data carrier): Final payment will only be approved once the Vg documents have been submitted. 15.The bidder acknowledges these preliminary remarks by signing the list of services. PRELIMINARY REMARKS The basis of the contract is - Vob, Part B (DIN 1961) - Vob, Part C (DIN 18 299) - Vob, Part C (DIN 18 380) - Vob, Part C (DIN 18 421) in the version valid at the time of the tender. When carrying out the services, the following standard sheets and guidelines in particular must be observed: - Second Ordinance Amending the Drinking Water Ordinance of December 5, 2012 - Drinking water dimensioning according to DIN 1988-300 - DIN 1986 and DIN 1988 - Energy Saving Ordinance (ENEV) - Water Management Act (WHG) - Here: Section 19 - Safety equipment for heating systems DIN 4751 and VDI 2715 - House chimneys DIN 181 60 - Calculation of chimney dimensions DIN 4705 - Masonry standard DIN 1053, Part 3 - Model guideline on fire protection requirements for pipe systems (model pipe system guideline MLAR) - Electrical equipment for combustion systems DIN VDE 0116 - Technical rules for hazardous substances TRGS 905 and 952 - Technical rules for gas installation TRGI Ï68 - 1996 - DVGW worksheet G 459 - Gas house connections for operating pressures up to 4 bar; installation - Technical rules for liquefied petroleum gas (TRF) 1996 - Guidelines for the use of liquefied petroleum gas Zh 1/455 (GUV 19.9) - Technical connection conditions of the local electricity and gas supply company - Contract template for maintenance (servicing, inspection, repair) of technical systems and facilities in public buildings (Maintenance 90) - as well as all relevant standard sheets and guidelines. The electrical connection and electrical installation of the items advertised must be carried out by the contractor in accordance with the VDI regulations (DIN VDE 0100) and the technical connection regulations of the electricity supply company and must be included in the unit prices. The supply lines are laid on site, and the contractor is responsible for laying and connecting them. Official rules and regulations, rules of the statutory accident insurance provider remain unaffected. The bidder is free to inspect the construction site in order to be able to take all the work that determines the price into account. Additional demands due to insufficient knowledge of the assembly conditions and the scope of work cannot be granted. All travel costs, parking fees, construction site facilities, construction meetings and the like are to be included in the unit prices and are not reimbursed separately. Participation in weekly construction meetings is to be included in the calculation. The use of subcontractors is only permitted with the express consent of the client. Particular care/caution is required when securing the construction site and when arriving and leaving the construction site. In deviation from DIN 18 379 and DIN 18 380, the following are agreed: 1.)Special measures for sound insulation in accordance with DIN 4109 and vibration dampening of system components against the building structure are to be included in the corresponding items. 2.)Delivery and assembly of pipe sleeves are to be included in the unit prices. 3.)Services in accordance with DIN 18 380, points 4.2.11 and 4.2.13 are to be included. 4.)Adapting system components to services not carried out to size by other contractors is not remunerated separately and is to be included in the unit prices. 5.)Checking the electrical cabling and the control and regulation system that is not carried out by the contractor is to be included in the unit prices. 6.) Chiselling and drilling for inserting brackets must be included in the unit prices. 7.) Erection and dismantling as well as provision of scaffolding whose working platforms are more than 2 m above the ground or floor must be included. 8.) Preparation of inventory and inspection plans must be included in the unit prices (unless shown as a separate item). EXECUTION - GENERAL: Fire protection: All soldering and welding work must be carried out with particular caution; additional fire protection measures, such as providing filled water buckets or fire extinguishers, must be taken. Before leaving the construction site, all work areas must be carefully checked for possible fire nests - this applies in particular to the ceiling and floor cavities. Accident prevention: Please note that the respective contractor is responsible for keeping the construction site tidy. In particular, the contractor is obliged to clean the construction site at regular intervals to remove any leftover materials, waste, etc. If the contractor does not comply with the construction management's request to clean, another company will be commissioned to carry out the work. The contractor must bear the resulting costs or the costs will be passed on to the companies involved in the construction. EXECUTION: Checking equivalence: The items in the tender are advertised in a completely product-neutral manner. Product details are only given where existing components are to be reused or need to be expanded, such as control systems. If equivalent types are offered that do not comply with the manufacturing and type designations for materials, valves, etc. specified in the tender, then in order to obtain clear price comparison options, brochures must be enclosed with the tender showing the equivalence of the items offered. Accessories such as controls, mixer motors, exhaust systems, etc. must be offered by the same manufacturer as the heating system in order to guarantee the system warranty. Sound insulation: The contractor must observe and take all measures in accordance with DIN 4109 "Sound insulation in building construction" and VDI 2715 "Noise reduction in warm and hot water heating systems" to avoid noise transmission. Thermal insulation: The Vob, Part C, DIN 18 421 and the Energy Saving Ordinance (enev) apply to the execution of the work. For the "direct handling" (i.e. placing on the market, processing, removal, etc.) of products made of artificial or natural, inorganic mineral fibers, TRGS 905 and TRGS 952 apply, in the version valid at the time of the tender. Attention! Only insulation materials that meet the acquittal criteria of TRGS 905 or that have the rating "free from suspected cancer" may be offered and processed! Proof of the classification of the insulation material must be included in the offer! Technical room - heating-water: Thermal insulation made of mineral fiber shells, aluminum-laminated with PVC foil sheathing. Cold water with rubber insulation. The sheathing must be processed correctly so that an increased release of fiber dust does not pose a health risk! DESCRIPTION OF THE SYSTEM General: The measure involves the conversion and extension of an existing fire station, Goethestrasse 32, 35114 Haina (kloster). A conversion and extension of the existing fire station is being carried out. The conversion includes the renewal of the sanitary facilities and the sanitary installation. The fire station will receive new underfloor heating and new radiators. The heating remains in the house connection room. The extension will be equipped with underfloor heating on the ground floor and first floor. Hot water is prepared for the ground floor using the existing hot water preparation centrally in the boiler room. On the first floor, hot water is prepared using instantaneous water heaters. Sanitary installation: Waste water pipes will be re-laid and connected to the new toilets and washbasins. Hot water is prepared decentrally using instantaneous water heaters. Cold and hot water is supplied to the individual taps using copper pipes and metal composite pipes. Prefabricated wall installations will be installed in the washrooms. The prefabricated wall installations must be integrated using drywall. The pipes are laid from above in clad installation shafts or in the suspended ceiling and in the prefabricated walls to be created. A hygienic drinking water installation is planned with flushing stations at the end of the installation or in ring mains. Drinking water samples taken before the system is handed over are to be included in the unit price of the contract unless specifically advertised. Careful and clean work must be carried out on the construction site. All components of the drinking water system must be transported and stored in such a way that internal contamination is avoided. To keep the system components in perfect condition, their protective devices must not be removed until immediately before assembly. The system must first be leak-tested dry using oil-free compressed air or inert gas in accordance with the Zvshk information sheet. All pipes, cold and hot water pipes are 100% insulated. Cold water is to be laid separately from hot water pipes. Heating installation: A new heating circuit distributor is to be installed in the building's technical room. Circuit regulating valves are provided, which are regulated using a measuring computer. All circuits are hydraulically balanced. The pipes are laid in copper pipe. This must be factored into the unit prices. Careful and clean work must be carried out on the construction site. All pipes, supply and return lines are to be 100% insulated. Heating lines are to be laid separately from cold water pipes. The utmost care and consultation with all companies involved in the construction and the construction management is required. The construction site must always be staffed with enough specialist personnel in order to adhere to the construction schedule. Measurements must be numbered and carried out room by room. Timesheets must be submitted to the construction management by the end of the week at the latest. Hourly work must always be announced to the construction management before execution and only carried out after approval. Timesheets submitted without prior consultation with the construction management will not be accepted. Timesheets must also be numbered. A measurement summary must be prepared for each invoice. This must be taken into account in the calculation. ACCEPTANCE Acceptance must be formal. The contractor will be given the opportunity to put the system into operation before acceptance. During this time, the operating personnel should be instructed if possible. Acceptance will only take place if the system is already running safely, all of the instructions listed below have been provided and appropriate labels have been put up on the system components. In addition, the system must meet the required conditions in terms of function and performance. The following must be submitted in duplicate for acceptance: inventory and inspection documents for the entire heating and sanitary system must be submitted in duplicate, 1 set in color and digitally (copied onto a CD or data carrier). Divided into the following chapters: 1. System description 2. Calculations/design data 3. Certificates/proof 4. Measurement reports 5. Manufacturer list/hotline 6. Component documents 7. Maintenance information 8. Spare parts list/consumable parts list 9. Diagrams 10. Drawings with the following contents: - System description - System log for filling and make-up water - Setting report for flushing stations - Reports on leak tests and pressure tests carried out - Certificates for flushing pipes - Commissioning reports - Instruction of operating personnel - Measurement reports for air volumes - Proof of hydraulic balancing - Technical data sheets - Operating and maintenance instructions - Manufacturer's assembly and service documents - Table of contents and dividers - Specialist contractor declaration in accordance with Enev - Contractor declaration for technical building equipment - Acceptance reports for chimney sweeps - Heating + ventilation circuit diagrams - Declarations of conformity for fire protection - Spare parts lists/consumable parts lists - Inspection drawings (inventory plans) - Diagrams (existing plans) in A4 folders and 1 copy in digital form (USB stick/CD). Additional contract terms § 1 The latest version of the procurement and contract regulations (parts B and C) apply. § 2 Before submitting a tender, the construction site and access roads must be inspected and the drawings viewed so that the tenderer is familiar with the local conditions. A lack of information about the location, the scope of work or any other opinion does not entitle the tenderer to make subsequent demands. § 3 Tender prices are fixed prices. Wage increases cannot be taken into account until 12 months after the tender has been submitted. After this date, collectively agreed wage increases can only be taken into account if they were not previously announced. § 4 Each contractor must ensure that the preconditions for his work are met before starting work; otherwise the construction management must be informed in writing. Hourly wage work may only be carried out on the basis of a prior order from the construction management. The required daily wage reports must be submitted to the construction management in writing for signature no later than 3 days after completion. Daily wage reports that are not recognized will not be taken into account in the billing. § 5 The client reserves the right to delete individual items from the list of services in whole or in part. If this occurs, the contractor has no claim to lost profits. Changes in quantity do not entitle the contractor to a price change. § 6 The contractor's special delivery and payment terms will not be recognized. § 7 The client is entitled to retain a security amount of 5% of the final sum for the duration of the liability for claims for defects after defect-free acceptance and invoice verification (not for scaffolding work). This amount can be replaced by a bank guarantee. 10% of the interim invoices submitted will be retained as security for contract fulfillment. § 8 The contractor expressly confirms that the expertise and performance capability of his company and his specialists is given to accept this order. § 9 The contractor must pay a contractual penalty of 0.2% of the gross order amount for each calendar day of delay. The contractual penalty is limited to a maximum of 5% of the gross order amount. § 10 Warranty period: in accordance with Vob, but the duration is extended to 5 years! § 11 Acceptance takes place formally with an acceptance protocol; fictitious acceptance is excluded. § 12 The award period ends on March 18, 2020. The bidder remains bound to his offer until the end of this period. § 13 The contractor is obliged to verify the location and route of underground cables and channels. § 14 The client reserves the right to request daily construction reports from the contractor every working day. § 15 Notices of disability must also be in writing if the disability is obvious. End of the preliminary remarks

Details: Description Republic Of The Philippines Province Of Misamis Occidental Municipality Of Calamba Tel. No. (088) 271-3215 / 271-4730 _______________________________________________ Invitation To Bid For Procurement Of Common-use Supplies And Equipment (cse) And Non-cse Office Supplies 1. The Municipality Of Calamba, Misamis Occidental, Through The General Fund Intends To Apply The Sum Of Eight Hundred Eighty Seven Thousand Four Hundred Ninety Four Pesos & 60/100 (p887,494.60) Being The Abc To Payments Under The Contract For Procurement Of Common-use Supplies And Equipment (cse) And Non-cse Office Supplies, With The Project Identification Number Lgucal-pb-2025-09. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item# Description Quantity Unit Lot A Abc Of Lot A – 514,655.60 1 Acetate Film, Legal, 100 Sheets/box 1 Box 2 Arch File 3" With 2 Rings A4 15 Piece 3 Archival Box (corbox) 14 Piece 4 Ballpen, 0.5, Black (12pcs/box) 151 Box 5 Ballpen, 0.5, Blue (12pcs/box) 4 Box 6 Ballpen, 0.7, Black (12pcs/box) 15 Box 7 Ballpen, 0.7, Blue (12pcs/box) 2 Box 8 Box Cutter, Heavy Duty, Big 12 Piece 9 Box Cutter Blade Refill, 10pcs/tube 6 Tube 10 Brown Envelope, Long 1224 Piece 11 Brown Envelope, Short 619 Piece 12 Calculator, 12 Digits 14 Unit 13 Calculator Scientific, 12 Digits, 417 Functions 2 Unit 14 Carbon Paper Film, Long, Black 3 Box 15 Certificate Holder, A4 154 Piece 16 Certificate Holder, Legal 12 Piece 17 Certificate Special Paper, Parchment A4 (cream) 94 Pack 18 Certificate Special Paper, Parchment A4 (apple Green Color) 5 Pack 19 Certificate Special Paper, Parchment Legal (cream) 16 Pack 20 Clip Backfold, 25mm(1"), 12pcs/box 23 Box 21 Clip Backfold, 50mm(2"), 12pcs/box 18 Box 22 Columnar Book, 4 Column, 216 X 280mm 10 Piece 23 Columnar Book, 6 Column, 216 X 280mm 10 Piece 24 Cork Board (30" X 40") 1 Piece 25 Cork Board (30" X 60") 3 Piece 26 Correction Pen, Quick Dry, 7ml 11 Piece 27 Correction Tape, 5mm X 12m 209 Piece 28 Data/magazine File Box, Metal, 3 Layer 4 Piece 29 Date Stamp / Dater Up To 2029 (mm/dd/yyyy Format) 5 Piece 30 Display Book/ Clear Book, 80/100 Pockets Long 30 Piece 31 Expanded Envelop,brown, Legal, With Garter 62 Piece 32 Expanded Plastic Envelop With Handle (legal) 6 Piece 33 Folder, Long, Brown 376 Piece 34 Folder, Long, White 1217 Piece 35 Folder, Short, Brown 124 Piece 36 Folder, Short, White 105 Piece 37 Glitter Paper, A4, Assorted Color 13 Pack 38 Glue, All-purpose, 225gms 41 Bottle 39 Glue Gun, Compatible With 1/2" Stick Glue 3 Piece 40 Glue Stick, All-purpose, 20g(minimum) 45 Piece 41 Gun Tacker Staple, Heavy Duty T-50 (1/2 Or 12mm) 3 Piece 42 Gun Tacker Staple Wire 23/8 Staple 5 Box 43 Gun Tacker Staple Wire Y-50 12mm, 1000staple/box 5 Box 44 Highlighter Pen, Green 23 Piece 45 Highlighter Pen, Orange 24 Piece 46 Highlighter Pen, Yellow 40 Piece 47 Index Tabbing, Numbers 14 Packs 48 Mailing Envelope (no Window), Ordinary, White, Short 6 Box 49 Mailing Envelope (no Window), White, Long (25pcs/bundle) 21 Bundle 50 Notebook, 80lvs 10 Piece 51 Paper Clip, Coated, Jumbo 71 Box 52 Paper Clip, Coated, Small 104 Box 53 Paper Fastener, Plastic Coated Metal 18 Box 54 Paper Fastener, Plastic, Long 9 Box 55 Paper Fastener, Plastic. Standard 38 Box 56 Paste Well W/ Spatula, 200g 5 Piece 57 Pencil #2 W/ Eraser 27 Piece 58 Pencil Eraser, Big, White 5 Piece 59 Pencil Sharpener(for No.2 Pencil) 6 Piece 60 Permanent Marker, Broad, Black, 31 Piece 61 Permanent Marker, Fine, Black, 23 Piece 62 Permanent Marker Refill, Black 5 Box 63 Photo Paper, Glossy, 180gsm, A4, 20sheets/pack 42 Pack 64 Philippine National Flag, 3' X 6' Polyester Flag 6 Piece 65 Plastic Envelope, Long 208 Piece 66 Plotter Paper 20" X 50' 1 Roll 67 Puncher, 2 Holes, Heavy Duty, Big 12 Piece 68 Ring Binder, Plastic, Black, 1" X 1.5m, Pcs. 12 Length 69 Ring Binder, Plastic, Black, 2&1/2" X 1.5m, Pcs. 12 Length 70 Ring Binder, Plastic, Black, 2" X 1.5m, Pcs. 12 Length 71 Record Book, 7" X 11.22", 150pages, Standard 7 Piece 72 Record Book, 7" X 11.22", 300pages, Standard 34 Piece 73 Record Book, 7" X 11.22", 500pages, Standard 18 Piece 74 Record Book, Mini (5.5" X 8.5"), 500pages 23 Piece 75 Rubber Band, Big 7 Box 76 Rubber Band, Small 6 Box 77 Ruler 12" X 1.5" 8 Piece 78 Scissors 6.5"/ 6 1/2 35 Piece 79 Scissors 7" Heavy Duty 8 Piece 80 Signpen, 0.3, Black (12pcs/box) 22 Box 81 Signpen, 0.5, Black (12pcs/box) 3 Box 82 Signpen, 0.7, Black (12pcs/box) 16 Box 83 Signpen, 0.7, Black (12pcs/box) 1 Box 84 Signpen, 0.7, Red (12pcs/box) 1 Box 85 Special Paper, Pale Cream, 8.5" X 13", 90gsm 12 Pack 86 Special Paper, Pale Cream, 8.5" X 13", 180gsm 260 Pack 87 Stamp Pad Ink,refill, Violet 30ml 4 Bottle 88 Stamp Pad With Ink, Violet 6 Piece 89 Stamp Pad With Ink, Violet, Big 12 Piece 90 Staple Remover 10 Piece 91 Staple Remover/tucker Remover (plier Type) 4 Piece 92 Stapler #10 18 Piece 93 Stapler #35 16 Piece 94 Stapler W/ Staple Remover, Heavy Duty, #35 16 Piece 95 Stapler, Long Arm (heavy Duty) 12"depth, 25 Sheets Capacity, Durable Metal Stapler 1 Piece 96 Staple Wire, #10-1m, (1000wires/box) 1 Box 97 Staple Wire, #35(26/6), (5000wires/box) 115 Box 98 Stick Glue For Glue Gun, 1/2" 5 Piece 99 Sticker Paper, A4 Glossy, Matte, Printable 5 Pack 100 Sticky Notes, 0.5" X 2.5", Assorted Color (4pads/pack) 25 Pack 101 Sticky Notes, 0.75" X 3", Assorted Color (4pads/pack) 19 Pack 102 Sticky Notes, 1.5" X 3", Assorted Color (4pads/pack) 8 Pack 103 Sticky Notes, 3" X 3" 9 Pads 104 Tape Dispenser, Heavy Duty 3 Piece 105 Tape, Double-sided, Foam Tape , 1" 149 Roll 106 Tape, Masking Tape, 1" X 30m 28 Roll 107 Tape, Masking Tape, 2" X 30m 28 Roll 108 Tape, Packing Tape Brown, 2" X 30m 15 Roll 109 Tape, Scotch, Clear 1" X 30m 56 Roll 110 Tape, Scotch, Clear 2" X 50m 40 Roll 111 Thumbtacks, Brass Plated 4 Box 112 Tucker Remover (plier Type) 2 Piece 113 Type Writter Ribbon Black 5 Piece 114 Us Bondpaper, Multicopy, A3, Sub. 20 6 Ream 115 Us Bondpaper, Multicopy, A4, 70gsm 662 Ream 116 Us Bondpaper, Multicopy, F4b (8.5" X 13") 431 Ream 117 Whiteboard Marker, Black, Fine, 28 Piece 118 Whiteboard Marker, Black, Fine (12pcs/box) 6 Piece 119 Whiteboard Marker, Black, Round 11 Piece 120 Whiteboard Marker Ink Refill, Black, 30ml 4 Bottle 121 Yellow Pad Paper 1 Pads Lot B Abc Of Lot B- 230,735.00 1 Adjustable Projector Tripod Stand 19 Pack 2 Anti-virus, 3in1 8 Pack 3 Brother Ink, Bt6000 Black 9 Pads 4 Brother Ink, Bt5000 Cyan 3 Piece 5 Brother Ink, Bt5000 Yellow 149 Roll 6 Brother Ink, Bt5000 Magenta 28 Roll 7 Brother Ink, Btd60 Black 28 Roll 8 Epson Ink, 001 Black 15 Roll 9 Epson Ink, 001 Cyan 56 Roll 10 Epson Ink, 001 Yellow 40 Roll 11 Epson Ink, 001 Magenta 4 Box 12 Epson Ink, 003 Black 2 Piece 13 Epson Ink, 003 Cyan 5 Piece 14 Epson Ink, 003 Yellow 6 Ream 15 Epson Ink, 003 Magenta 662 Ream 16 Epson Ink, T49k Black 431 Ream 17 Epson Ink, T49k Cyan 28 Piece 18 Epson Ink, T49k Yellow 6 Piece 19 Epson Ink, T49k Magenta 11 Piece 20 Epson Ink, 664 Black 4 Bottle 21 Epson Ink, 664 Cyan 4 Bottle 22 Epson Ink, 664 Yellow 4 Bottle 23 Epson Ink, 664 Magenta 4 Bottle 24 Epson Printer Ribbon Lx-300+ Cartridge 6 Cartridge 25 Epson Printer Ribbon Lq-310 Cartridge 12 Cartridge 26 Epson Printer Ribbon Lq2190 4 Cartridge 27 External Hard Drive, 1tb 1 Unit 28 Hp 682 Ink Catridge Black 10 Cartridge 29 Hp 682 Ink Catridge Colored 10 Cartridge 30 Mouse, Optical, Usb Type Connection 2 Unit 31 Mouse, Wireless 2 Unit 32 Pen Pointer (usb Wireless Powerpoint Laser) 1 Piece 33 Notebook Stand And Cooling Pad Cooling Fan For Laptop, Compatible With 10" - 14" Laptops, 2 Usb Ports 7 Unit 34 Usb 3.0 Hub, 4 Ports 1 Unit 35 Usb 32gb 1 Piece 36 Usb 64gb 15 Piece 37 Usb Otg Flashdrive, 32 Gb 2 In 1 Type C & Micro Usb Stick Pendrive For Android 2 Piece Lot C Abc Of Lot C -127,854.00 1 Air Freshener, 320ml, (lemon) 16 Cannister 2 Bathroom/toilet Cleaner, Multi-purpose, 1l 10 Bottle 3 Battery Aa, Long Lasting (2pcs/pack) 28 Pack 4 Battery Aa, Long Lasting (100pcs/box) 2 Box 5 Battery Aaa, Long Lasting (4pcs/pack) 8 Pack 6 Battery Aaa, Long Lasting (100pcs/box) 1 Box 7 Bleach, 500ml, Original, 99.9% Antibac 3 Bottle 8 Bleach, 1 Liter, Original, 99.9% Antibac 1 Bot 9 Bleach, 1 Gallon, Original, 99.9% Antibac 8 Bot 10 Broom (soft), Tambo 16 Piece 11 Broom (stick), Walis Tingting 13 Piece 12 Cleaning Towel 18 Piece 13 Dishwashing Liquid, 500ml 1 Bot 14 Dishwashing Liquid, 1 Liter 44 Bot 15 Disinfectant Multi-purpose Liquid Bleach, 1 Gallon 7 Bottle 16 Disinfectant Spray 400g 4 Cannister 17 Dust Bin(garbage Can), 25 Liters 5 Piece 18 Dust Pan 7 Piece 19 Fabric Conditioner, 1 Liter 7 Bottle 20 Filer Tray, 3 Layers 1 Piece 21 Floor And Wall Scrub Brush Wooden Long Handle 4 Piece 22 Floor Brush, Long Handle 2 Piece 23 Floor Mop, Spin Mop With Extra Mop Head 3 Set 24 Floor Rug 9 Piece 25 Floor Wax, 355g, Red Dye 9 Cans 26 Furniture Cleaner 2 Piece 27 Garbage Bag, Medium (10bags/roll) 10 Roll 28 Garbage Bag, Large (10bags/roll) 57 Roll 29 Garbage Bag, White, Xl (10bags/roll) 15 Roll 30 Garbage Bag, 21"x 23" (10bags/roll) 30 Roll 31 Garden Gloves 2 Pair 32 Glass Cleaner, 500ml 5 Bottle 33 Glass Cleaner, 500ml, Spray Type 2 Bottle 34 Hand Soap, Liquid, Refill, 1 Liter 22 Bottle 35 Hand Towels, 100% Cotton, 15"x 25" 25 Piece 36 Ice Candy Bag, 1 3/4 X 10", 50 Packs 1 Bundle 37 Multi-purpose Insect Spray, Water Base, 600ml 7 Cannister 38 Muriatic Acid (1gal/bottle) 6 Botte 39 Plastic Cover (thick) 1 Roll 40 Plastic Cover (thin) 1 Roll 41 Rubbing Alcohol, 70%, 500ml 125 Bot 42 Rubbing Alcohol, 70%, 1 Gallon, Ethyl 31 Bot 43 Soap, Bathroom Soap, 60g 14 Piece 44 Soap, Detergent Bar, 135g 13 Bar 45 Soap, Powdered Soap, 1.1 Kg/pack 9 Pack 46 Steel Filling Cabinet 3 Drawer With Safe Vault 1 Unit 47 Steel Filling Cabinet 4 Drawer With Safe Vault 1 Unit 48 Storage Box , 60l Capacity 2 Piece 49 Straw Twine 8 Roll 50 Toilet Deodorant Cake 18 Piece 51 Toilet Paper, 2 Ply (12rolls/pack) 34 Pack 52 Toilet Paper, 3 Ply 50 Roll 53 Wet Wipes, Big, 80sheets/pack 26 Pack 54 Wooden Gavel And Block, 1 Set Lot D Abc Of Lot D - 14,250.00 1 Automatic Floor Polisher, 150w - 220v 1 Unit 2 Sealer Machine, 200/300mm Impulse Heat Sealer, For Polyethylene (pe) And Polypropylene (pp) , Power: 200w, Source: 220v/240v, 50/60hz 1 Unit 2. The Municipality Of Calamba, Misamis Occidental Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 45 Calendar Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Office Of Bac Secretariat, Local Government Unit, Calamba, Misamis Occidental And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8:00-12:00 A.m., 1:00-5:00 P.m.) 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 11, 2025 To February 26, 2025, From 8:00 Am To 5:00 Pm (mondays To Fridays Only) From The Given Address And Website(s) Below [insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P1,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. The Bidder May Opt To Bid The Whole Project Or By Lot. Below Are The Fees Per Lot. Lot A - P1,000.00 Lot B - P 500.00 Lot C - P 500.00 Lot D - P 500.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both} On Or Before February 26, 2025, 2:00 P.m. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On February 26, 2025, 2:00 P.m. At The Bac Conference Room, Multi-purpose Hall, Calamba, Misamis Occidental. {[if Applicable, Insert] And/or Via [insert Website, Application, Or Technology To Be Used].} Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. [insert Such Other Necessary Information Deemed Relevant By The Procuring Entity Such As The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submissions] 10 . The Municipality Of Calamba, Misamis Occidental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jopson D. Baones Chairperson, Bids And Awards Committee Lgu-calamba, Misamis Occidental Tel. No. (088) 271-3215 Email Address-baclgucalambamisocc@gmail.com Fax No. (088) 271-3221 Website:www.calambamisocc.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: [indicate Websites] [if Applicable] For Online Bid Submission: [indicate Website] February 9, 2025 [date Of Issue]

Details: General building description: The client is planning to renovate the building at Neustadtstrasse 5 (former executioner's house) in Lenzen. The building is a listed building (individual monument). The building ensemble is made up of three building sections, each with its own roof structure and two or three smaller extensions. The oldest part of the building and part of the residential building is the so-called executioner's tower. The two-storey part of the building consists of brickwork with a 1.50 m high base structure. The wall thickness on the ground floor is 1-1.2 m and on the upper floor 40-50 cm. To the south of the tower, a half-timbered extension is attached as an extension to the residential building. The two-storey extension is built using carpentry as a half-timbered construction. The brick infills are coated with a colored lime slurry. The roof structure is a collar beam roof with a double standing chair. To the north-east, a rectangular stable building with a cantilevered upper floor adjoins the tower. The building is a purely half-timbered structure, filled with bricks and clay stakes. The roof is a gable roof with a collar beam roof as the roof support, with double-standing chairs. The roof covering is designed as a crown covering with plain tiles. An outbuilding, built as a solid, two-storey building with a pent roof and a brick facade, borders the ensemble at the north-west corner of the property. According to the expert reports, all parts of the building have significant structural defects and damage caused by moisture and dry rot. The planned services include the renovation of the damaged findings and the structural reinforcement of undersized structural components. The following construction measures are to be carried out: scaffolding, demolition work, bricklaying and plastering work, carpentry work, roofing work, joinery work, painting work. The overall work will be awarded and carried out according to combined or individual trades in accordance with the following division into lots: Lot 2 - scaffolding Lot 3 - demolition work Lot 4 - main construction trade Lot 5 - carpentry work Lot 6 - roofing work Lot 7 - joinery work Lot 8 - painting work Subject of this tender: Lot 7 - joinery work with the following essential services: covering 30 m² of staircase, wood-based panels 24 wooden single-pane windows, reworking 30 m² window opening provisionally closing 8 slatted frames with wood fiberboard, up to 2.5 m² 10 wooden interior doors, single-leaf, make accessible 2 board shutters, door, larch, 900/2000 mm

Details: Description The National Library Of The Philippines (nlp), Through Its Bids And Awards Committee (bac), Intends To Procure For The Supply And Delivery Of Equipment And Accessories For The Children Library (lot Bidding ) Through Section 53.9 (negotiated Procurement – Small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You Or Your Duly Authorized Representative Not Later Than March 4, 2025 At 4:00 Pm. The Following Documents Are Also Required To Be Submitted Along With Your Quotation On The Specified Deadline Above: Document Remarks Philgeps Registration A Copy Of Platinum Certificate Or Red Membership. Copy Of 2024 Mayor’s Or Business Permit In Case Not Yet Available, You May Submit Your Expired 2023 Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. However, A Copy Of Your 2024 Mayor’s Or Business Permit Shall Be Required To Be Submitted Before Award Of Contract. Notarized Omnibus Sworn Statement (gppb-prescribed Form) Supported By Secretary’s Certificate Or Special Power Of Attorney, If Necessary. Latest Income/business Tax Return Manually Filed Tax Returns Or Filed Through The Efps For Any Clarification, You May Contact Us At Telephone No. (02) 5314-2100 Local 406 / 412 Or Email Address At Bac@nlp.gov.ph. (digitally Sgd.) Maricel M. Ureña Bac Chairperson Unit Minimum Technical Specifications Qty. I. Forest, Cave, Sea Exploration, And Bench Reading Areas (minimum Specifications Equivalent Or Better) Lot 1. Single Privacy Study Carrel - Thickness: 5/8” - Frame: Metal With Adjustable Leveling Floor Glides - Slide-out Keyboard Tray Measurement: 31-1/2”w X 11-3/4”d X 25-1/2” H Or Large Enough To Hold The Regular Size Of A Keyboard - Work Surface Measurement: 32-3/4’w X 24-1/2”d X 48”h Or Large Enough To Hold Crt, Flat Panel Or Laptop Computers - Age Range: Adult - Shape: Rectangular - Assembly Required: Yes - Finish Type: Laminated - Finish Type: Black - Furniture Finish: Teak - Top Material Type: Metal,particle Board,teak - Product Dimensions: 24.5”d X 32.75”w X 48”h (62.2 X 83.2 X 121.9 Cm) Or Good Enough To Accommodate Desktop Computer - Size: Large - Item Weight: 70 Pounds (31.5 Kg) - Special Feature: Adjustable - Mounting Type: Floor Mount - Base Type: Legs - Quantity: 5 Pieces 5 Pcs 2. Giant Bean Bag - 1219 Diameter X 650mm H (approx.) - Cover, 100% Polyester - Filling, Ground Foam - Quantity: 15 Pieces 15 Pcs 3. Smart Air Purifier - High-efficiency Filter - High-precision Sensors - Oled Touch Screen - Smart Control - 1 Year Warranty - Specifications: • Cadr (particles): 400 M³/h • Cadr (formaldehyde): 150 M³/h • Area Efficiency: 130m² Per Hour [2] • Purification Efficiency: 99.97 % • Filter Lifetime: 6~12 Months • Noise Levels: 32.1~63db • Rated Voltage: Ac100-240v~ • Rated Frequency: 50/60hz • Rated Power: 30w • Net Weight: Approx. 5.6 Kg • Gross Weight: Approx. 7 Kg • Dimensions: 250 * 250 * 555 Mm - Quantity: 12 Pieces 12 Pcs Ii. Puppetry Room (minimum Specifications Equvalent Or Better) 1. Human And Animal Puppets - Hand Puppets - Height: 2 Ft (approx.) - With Individual Covers - Animal Characters: 1 Lion, 1 Tiger, 1 Rabbit, 1 Goat, 1 Ant, 1 Dove, 1 Turtle, 1 Monkey, 1 Hunter, 2 Dogs - Quantity: 11 Pieces 11 Pcs 2.. Steam Iron - Multifunctional Steam Ironing Machine - Innovative Exterior Design - Large Steam Panel, Adjustable By 180° Rotation - Easily Switch Between Hand-held Garment Steamer Or Iron Mode - Two Switch Control Modes, Jog And Automatic, Adapt To A Variety Of People - 35s Rapid Steam Output, Maximum Steam Volume Of 18g/min - 160ml Removable Water Tank, Can Be Used Continuously For 11 Minutes - Rated Voltage/frequency: 220v~50hz Power: 1000w - Water Tank Capacity: 160ml (available For 9+3min) - Product Material: Pc+abs - Product Net Weight: About 1.1kg; Brush 80g - Product Size: 130*139*275mm - Power Cord Length: 1.8m Exposed - Preheating Time: ≥35s (preheating For 25 Seconds, Steam Will Start Within About 10 Seconds) - Steam Volume: 17+3g/min - Temperature: ≥100℃ (temperature At The Steam Outlet) ≥180℃ (temperature Of The Metal Panel) - Safety Protection: Thermostat Over-temperature Protection, Fuse Protection - Quantity: 2 Pieces 2 Pcs 3. Handheld Vacuum Cleaner - Handle And Blow Vacuum Cleaner - Accessories Are Easy Detachable, Accessories Include: Floor Brush, Bed Brush, Crevice Tool, Round Brush, Hose, Extension Tubes, And Shoulder Belt - Washable Hepa Filter For Easy Cleaning. - Really Cyclone Style, Bagless Can Suction 100% Full. - Transparent Dust Tank Easy To See Whether The Dust Is Full Or Not. - Crevice Nozzel And Bed Brush Can Easy To Clean Any Place. - Power: 600w, 220v, 60hz - Color/finish: White+blue - Product Size: 365 X 148 X 215 Mm - Weight: 2.3 Kg - With 360° Round Brush - 4 Meters Cord - Quantity: 2 Pieces 2 Pcs 4. Container/storage Box With Handle For Portability - Capacity: 20 Liters - Color: Clear - Size: L44.0 / W31.0 / H22.5 (approx.) - 2 Sides Locking Lid / Snap Lock - With Handle For Portability - Quantity: 20 Pieces 20 Pcs 5. Container/storage Box With 6 Spinners/wheels - Capacity: 120 Liters - Color: Clear - Size: L72.3 X W52 X H44 Cm (approx.) - 2 Sides Locking Lid / Snap Lock - With 6 Spinners/wheels - Quantity: 15 Pieces 15 Pcs Pcs 6. Uv Sterilization Lamp - Power: 36w - Voltage: 220-240v 60hz - Uvc Wavelength: 253.7nm - Area Coverage: Up To 40sqm - Light Frame Size: 190mm X 190mm X 420mm - Light Frame Material: Iron With High Grade Frosted Surface - Remote Control Timer: 15/30/60mins - Remote Control Range: 30m - Lamp Type:36w Uvc Lamp - Lamp Burning Hours: 8000 Hrs. - Replaceable Lamp: Yes - Ozone Feature: Yes - Quantity: 5 Pieces 5 Pcs 7. Foldable Platform Hand Truck/ Trolley - Capacity: 300kgs - Steel Handle With Comfortable Foam - 5 “pu Wheel - Platform Size: 907x608mm (approx.) - Over Size: H850xh195xl907xw608mm (approx.) - Pb-free And Uv Resistant Powder Coating - Non-slip Pvc Mat - Quantity: 5 Pieces 5 Pcs Iii. Recording Room (minimum Specifications Equivalent Or Better) 1. Green Screen Stand - Muslin Stand, 9 X 10 Feet / 2.8m X 3m - Heavy Duty Background Backdrop With Clips - Professional Aluminum Alloy Construction For Durability And Portability - Solid Safety 3 Legs Stages / Holds Canvas, Muslin, Or Paper - Width And Height Adjustable - Premium Quality Fabric Material Carry Bag - Quantity: 1 Piece 1 Unit 2. Wooden Easel - Height, 1.6 M (approx.) - Frame Limit, 90 Cm (approx.) - High Quality Pine Easel - Smooth Surface With Natural Texture - Double-clip Triangular Stable Structure - Folding Design - Suitable For Children And Adult Painting Activity - Quantity: 15 Pieces 15 Pcs 3. Led Studio Video Light Kit With Stand - 24 Inch Led Video Panel Light With Stand - Stable Fill Lighting Effect - 96 Photo Light - Remote Controller, To Easily Adjust The Lighting Effect (brightness/color Temperature) - 24-inch Led Light Size: 56*28cm - Color Temperature: 2700k-7500k - Cri: >96+ - Light Beads: 160pcs - Brightness Adjustment: 5%-100% - Quantity: 2 Pieces 2 Pcs 4. Teleprompter For Dslr - Portable Smartphone/table/dslr Teleprompter - Fits A Smartphone/tablets Prompting Up To 11” - Supports Vertical Or Horizontally Shooting - Ios And Android App Control - Bluetooth Remote Included - Equipped With 49/52/55/58/62/67/72/77/82mm Lens Adapter Rings - Quantity - 1 Piece 1 Pc 5. Camera Bag - Multifunctional Professional Camera Backpack - Water-repellent And Tear-resistant - Approximately 50/50 Storage Split Between Personal Items On The Top And Photo Gear On Bottom - Divider System For Camera Body, Lenses And Accessories - Storage For 15” Laptop Or 10” Tablet - Side Storage For Tripod - Adjustable Length Backpack Straps - Side Access With Interior Door Organization Panels - Pass-through Strap On Back Panel To Put On Carry-on Roller Cases With Extendable Handles - All-weather Cover - Quantity: 1 Piece 1 Pc 6. Dslr Camera Battery Pack - Compatible With Canon Eos 250d - 7.2 V - 1040 Mah - Lithium-ion - Quantity: 2 Pieces 2 Pcs 7. Usb C Hub - Usb-c Adapter, With 4k@60hz Hdmi, 100w Power Delivery, 10 Gbps Usb C And 2 Usb A Ports, Sd Card Reader And 3.5mm Audio, For Macbook Air, Macbook Pro, Xps, And More - Quantity: 2 Pieces 2 Pcs Delivery Schedule: 30 Calendar Days Upon Receipt Of P.o Approved Budget For The Contract Seven Hundred Eighty Seven Thousand Four Hundred Pesos (787,400.00)