Wood Tenders

Wood Tenders

Province Of Cavite Tender

Electrical Goods and Equipments...+1Electrical and Electronics
Philippines
Details: Description 1. 1 Unit Mortuary Freezer/refrigerator Unit Cost: Php 1,300,000.00 Specification: -2 Body Freezer/refrigerator -dimensions (mm): 2480x810x1300 -body Tray Size: 1940x610mm -insulating Layers: 10 Centimeters -refrigerant: R600a -compressor: – Separate Temperature Controller. Has 3 Compressor -thermostat: Microcomputer Control Digital Display -with Free Additional 1 Body Freezer/refrigerator" Physical Description Finished: Stainless Steel Total Weight: 280kg Utility Requirements Voltage: Ac220v Single Phase Total Power: 880w (2 Units) Avr : 3000 Watts, 230v, 60 Hz, Single Phase, Servo Motor Control Type, Toroidal Transformer, With Delay Timer, Circuit Breaker Switch Accessories, Consumables, Spare Parts, Other Component Interior Roller Racks Flush Mounted Door Heavy-duty Chrome Planted Stainless Steel Body Trays, Refrigerator Wooden Case 6 Pieces Strong Quality Universal Wheel Environmental Requirements Cryogenic Temperature: 0°c~-35°c Temperature Reaches: -10 To 5 Degrees Adjustable 18°c Within 24 Hours 2. 1 Unit 24 Placer Centrifuge Unit Cost: Php 350,000.00 Specifications: •metal Housing And Lid •stainless Steel Centrifuging Chamber •practical Lid Locking Device •viewing Post In The Lid •lid Locking And Holding, Imbalance Switch-off, Automatic Rotor Recognition Emergency Lid Lock Release. •foil Keypad, Speed Rpm: Entry In Increments Of 100, Impulse Key For Short Centrifuging , Rcf Key •max Capacity: 4x100ml / 32x15ml •max Rpm: 6,000min •max Rcf: 4,226 •running Time: 1-99min, Continuous Run, Short Cycle Mode (impulse Key) Avr: 2000w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 3. 1 Unit 6 – Placer Centrifuge Unit Cost: Php 280,000.00 Specifications: •small Tabletop •with 90 Swing-out Rotor And Tubes 6x15ml •for Common Blood Collection Tubes •microprocessor Control •time And Speed Individually Adjustable •pure Key For Short Centrifuging •max. Speed : 4,000min , Max Rcf : 2,254 •voltage: 200 – 240 Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 4. 1 Unit Serologic Centrifuge Unit Cost: Php 350,000.00 Specifications: •tabletop, Maximum Speed: 6,0000rpm •maximum Capacity : 8x15ml •electrical : 200-240v •built-in Versatile, 8-place, Fixed – Angle Rotor And Adjustable Lcd Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 5. 1 Unit Platelet Agitator Unit Cost: Php 300,000.00 Specifications: •movement: Flat Bed Agitation •4 Trays (24 Bags ) •frequency Of Oscillation: 65 + / -7 Cycles / Minute •andible Alarm / Beeps For Power Failure •led Indicator For Blown Fuse •continuous Operation •power Supply : 230 + / -10 % Vac 50hz 6. 1 Unit Tissue Flotation Bath Unit Cost: Php 120,000.00 Specifications: •type : Water Bath •electrical Requirements : 230-240v – 60hz •electrical Parameters : 230v:50/60hz, Pmax:300w •controller Type : Microprocessor •led Display •microprocessor – Controlled Heating From Ambient To 65o 7. 1 Unit Vortex Mixer Unit Cost: Php 100,000.00 Specifications: •tabletop Vortex Mixer With 200 To 3000 Rpm + 5% Of Speed Range. •electronic Sensing Technology With Intelligent Control Of Speed, Time And Working Modes •different Oscillation Mixing With 3 Sec Of Acceleration And Deceleration Time •lcd Display, And Permanent Magnet Dc Motor With Over-temperature Protection •two Exchangeable Safety Operation •counting And Countdown Timing Function Specification : •circumferential Shaking Mode •orbital Diameter : 4.5mm •speed Range : 200 To 3000rpm + 5% •maximum Load : 1.0 Kg •operation Mode : Inching : Optical Induction / Continuous Working •speed Control : Pwm Stepless Speed Control •lcd Display •timer Range : 1 Sec To 999 Min •timing Function : Counting And Countdown Timing •power Supply : Dc 24v •with Power Adaptor 24v Dc/ 180-240v 60hz 8. 1 Unit Hot Plate Unit Cost: Php 60,000.00 Specifications: •maximum Temperature : 220°c, Explosion Proof •temperature Range : 40°c – 220°c •plate Diameter : 6.1 •provides 36.5sg. Inches Of Heating Surface •material: Aluminum •electrical : 220v, 5a, 600w, 1ph, 50/60hz Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 9. 1 Unit Cytocentrifuge Unit Cost: Php 350,000.00 Specifications: •processes 12 Specimens At One Time •dimension (w X D Xh ) •with Closed Lid : 16x9.5x24.5in. (40.5x24x62cm) •with Open Lid : 16x25x24.5in (40.5x62.5x62cm) •weight : 26.5 Lb. (12kg) •power Requirements : 100-240 Vac, 50/60hz, 1ph, 150va Max. 10. 1 Unit Therapeutic Ultrasound Machine Dual Head Small And Large Unit Cost: Php 298,120.00 Features: * Built-in Rechargeable Battery * Multi-frequency Treatment Head 1 And 3 Mhz Large * Continuous And Pulsed Ultrasound Therapy * Contact Control: Automatic Power Switch-off And Treatment Time Interruption In Case Of Insufficient Contact; The Visual Indicator Of The Treatment Head Switched On * Pre-programmed Treatment Suggestions: 25 - Evidence Based * Programmable Positions: 300 * Mains Supply Technical Specifications: Power Supply: 100-240 V ± 10% / 50/60 Hz Dimensions (wxdxh) Device: 24 X 32 X 12 Cm Device With Base: 24 X 30.5 X 18.2 Cm Weight: 2 Kg Weight, Including The Optional Battery: 3 Kg" Standard Accessories: * 4-series Operating Instructions (cd Rom) * 4-series Information Booklet * Mains Cable 230v-eur * Mains Cable 230v-eur * Ultrasound Multi-frequency Treatment Head(s) (model Dependent) * Holder Treatment Head (model Dependent) * Contact-gel, Bottle 250 Ml, 1x" Includes: 1 Pc Multi-frequency Treatment Head, Large (5cm2) 1 Pc Multi-frequency Treatment Head, Small (0.8cm2) 2 Pcs Probe Holder Protector 1 Pc Cart Heavy Duty (local) 1 Pc Sonomed Ultrasound Gel (5 Liters) 11. 1 Unit Continous Passive Motion (cpm) Smart Rehabilitation Solution Unit Cost: Php 650,000.00 Features: * Portable Knee Cpm With Smal Size And Light Weight * Adjustable A Length Of Femur And Tibia Position * Progressive Mode: Relieves Pain By Gradual Increment Of Angle Of Rehalibitating Exercise. * Oscillation Mode: Maximizes Its Therapeutic Effect By Repeating Exercise At Each End-angle. * Allows To Select Speed: Uniform/ Accelerated Mode * Easy Operation With Touch Panel And Customized. " Functions: * Speed 1 - 5 Level * Timer 1 - 99 Min. * Count 1 - 99 * Pause 0 - 9 Sec Technical Specifications: * Femoral Size 26 - 45 Cm * Tibia Size 29 - 59 Cm * Motion Range - 10°~ 140° * Speed 75°~ 130°/min * Angle Of Progressive -5°~ 15° * Angle Of Oscillation -5°~ 15° * Count (progressive) 3 - 10 * Count (oscillation) 3 - 10 * Weight 12kg * Dimentions (wxdxh) 360 X 1025 X 500 (mm) * Power Supply 100vac - 240vac, 50/60hz 12. 4 Units Heavy Duty Suction Machine Unit Cost: Php 285,000.00 Features: •piston/cylinder System – Results In Low Working Speed, Quiet, Low Strain On Movable Parts, Minimum Maintenance •rapid Vacuum Build-up •quiet Drive System •precise Vacuum Setting •protection Against Electric Shock Class I Specifications: High Vacuum: -95kpa, -713mmhg High Flow: 40,50,60 L/min Power: 100-240vac, 150w, 60hz Weight – Trolley: 35.3 Lbs Protection Class Ii: With A Protective Earth. Potential Equalization Conductor: Maintains The Difference In Potential At 0, Thus Preventing Any Transfer Of Static Electricity Running Through The Patient Ip21: Protection From Dripping Water Vacuum Gauge: Kpa & Mmhg 13. 10 Units Portable Suction Machine Unit Cost: Php 85,000.00 Specifications: •max. Vacuum: -75 Kpa / -563 Mmhg ± 10% Tolerance •flow: 18 L/min. ± 10% Tolerance •dimensions: 15″ X 6 3/4″ X 11 1/4″ •weight: 8 Lbs •drive Unit: Quatroflex Piston/cylinder Technology •electrical Info •ac/dc: 100 – 240 V | 50 – 60 Hz •power Consumption •ac: 90 W •ac/dc: 80 W •noise Level: 51.2 Db @ 3 Ft •vacuum Regulator: Membrane •protection Against Electric Shock: Type Cf (cardiac Floating: Max. Earth Leaking Current 10 Μa) •medical Device Classification:class Iia •ingress Protection: Ip21 •battery: Nimh •operating Time On Battery: 30 Minutes •charging Time Of Battery: 5 Hours •low Battery Indication: Led And Acoustic •overflow Protection: Disposable Overflow Protection/bacterial Filter 14. 1 Set Laparoscopic Instrument Set Unit Cost: Php 200,000.00 •2 Maryland Dissecting Forceps •2 Grasper Long Tip •2 Grasper Short Tip •2 Shears •2 Hook (electrocoagulation) 15. 7 Units Hydraulic Hospital Stretcher Unit Cost: Php 150,000.00 Features: -the Main Frame Of The Stretcher Is Made Of Electrostatic Plastic Sprayed Galvanized Steel Tube. -the Mattress Platform Is Made Of X-ray Revealed Material. -it Is Equipped With Imported Double Rise-and-fall Hydraulic Pump Systems. 150 Mm Diameter. -dust Proof Castors With International Advanced Central Locking System Make The Stretcher Move Steadily, Reliably And Lightly. -the Stretcher Has The Functions Of Hi-low, Trendelenburg And Reverse Trendelenburg Which Are Controlled By The Treadles Lying At The Two Sides O The Stretcher. -functions Are Supported By Imported Large Hydraulic Pump Which Make The Stretcher Never Swayed. -the Headrest Is Supported By Gas Spring While The Knee Rest Is Controlled By Manual Crank Which Is In The End Part Of The Stretcher. -the Bottom Cover Is Made Of Abs Material And Shaped Once For All Which Can Be Easily Cleaned. The Stretcher Mattress Platform Is Of Separate Structure. -equipped With Infusion Pole, Drainage Hook And Collapsible Stainless Steel Side Rails. -it Is The Best Choice For Emergency Room And Icu Ward For Transferring Patient. -us Hydraulic Pump Size: 204.5 × 79 × 60.5~92 Cm Specification: Packing Dimension: 213.5 X 86.5 X 81.5 Cm Outer Dimensions (side Rails Up): L2095*w800mm(±10mm) Mattress Platform: L1910*w640mm(±10mm) Bed Height: H585-910m(±10mm) Backrest Angle: 0-90° Maximum Thigh Rest: ≥30° Tr/atr: ≥12° Height Of Side Rails(above Mattress Platform): 420mm(±10mm) Safe Working Load: 200kgs 16. 1 Unit Automatic External Defibrillator Unit Cost: Php 146,776.36 (aed) Infants & Children Ecg Monitoring Pulse Oximetry Aed(energy: 200-joues Max.) Manual External Synchronous/asynchronous Defibrillation Description Display: Screen Type: High-resolutiondisplay, Tft Colour Display Screen Size: 7inches (17.7cm) Diagonally Sweep Speed: 5/25/50mm/sec Information: Heart Rate,nibp,spo2,temp,delivered Energy Resolution: 800x480 Aed Voice Promptsand Screen Prompts. Energy Programmable Sequence: 200,300,360 Joules; 150,150,200 Joules; 50, 75, 100 Joules; 30, 30, 50 Joules; Discharge Control: Control On Device Front Panel. Specifications Ecg: Patient Connection: 3-lead Ecg Cable, Or 5-lead Ecg Cable, Paddles. Lead Selection: Displayed On Monitor, Paddles, I, Ii, Iii,avr, Avl, Avf, V. Ecg Size: 2.5,5, 10, 20, 30 Mm/mv Display On Monitor. Heart Rate: 20-350bpm. Protection: With Stand 4000vac/50hz Voltage In Isolation And Work Against Electrosurgical Knife And Defibrillation Nibp Working Mode: Manual/automatic Method: Automatic Oscillation Cuff Type: Standard Adult; Optional Pediatric/neonatal Temp. Measurement Range 0~50℃ Resolution 0.1℃" Pulse Oximetry(spo2) Display: Spo2 Value, Waveform, Pulse Range:0~99%for Adult, Pediatric And Neonatal Patients Probe: Standard Adult Finger Clip Optional Pediatric Y-type Clip And Neonatal Wrap Defibrillator Waveform: Biphasic Defibrillator Type: Manual External Synchronous/asynchronous Defibrillation. Charge Time: Less Than 10 Seconds To 360 Joules Energy Display: Monitor Display Indicates Both Selected And Delivered Energy. Charge Prompt Type: Voice And Visual Prompts. Energy Selection: Selectable At 0, 3, 5, 7, 10, 20, 30, 50, 100, 200, 300, 360 Joules Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated) Battery Description Standard Type: Li-ion Battery Li1104c 11.1vdc 4000mah X2 Standard Capacity: Up To 10 Hours Ecg Monitoring Or 60 Full-energy Discharges. Low Battery Indicator: Flashing Low Battery Icon On Display And Bat Indicator On The Panel Of Defi-monitor Be On Recharge Rate: 80% In 3 Hours. 100% In 5 Hours. Built-in Recorder Paper: 50mm Thermal. Printing Method: High-resolution, Thermal Print Head. Record Date, Time ,sweep Speed, Waveform Gain, Heart Rate, Energy (joule) And Ecg Waveform Print Mode Hr Exceed Limits Alarm Recording Auto Timed Recording Real-time Recording Defibrillation Discharge Trigger Recording Power Ac-dc Dual-use: Use The Batteries,ac100v~240v,50/60 Hz. Vehicle Voltage(option): Dc 12v" Main Unit Portable Dimensions:l320xw205xh410 Weight: 7.5kg" 17. 1 Unit Newborn Hearing Screening Machine- Dpoae Screening (single Oae Probe) W/ Patient Data Transfer Program Unit Cost: Php 750,000.00 Dpoae: Distortion Product Otoacoustic Emission • Extra Oae Probe • Laptop • Smart Label Printer • 20 Rolls Of Thermal Paper • Leak Check: Analysis Of Feedback Signal (440 Hz Probe Tone) • Probe Check: Limit Of Maximum Sound Pressure (“stimulus”), Comparison Across Speakers (“symmetry”), Leak Check (“probe Fit”) • Calibration: In-the-ear Calibration With Ear-canal Volume Adjustment • Noise Detection: Narrow Band Noise Around 2f2-f1 • Residual Noise Calculation: Weighted Averaging, Summed Weighting Factors, • Artifact Rejection: Weighted Averaging • Response Detection: F-test, F-value At A Single Point (fsp) • Frequency Ratio F2/f1: 1.22. Sample Rate: 48 Khz (stimulus, Response) Minimum Dpoae Level Criterion: L1 – 70 Db • Measurement Interval: 4096 Samples • Stimulus Modes With Frequency-modulated Dpoae License: Fm = 1.4-1.6 Hz, Modulation Depth = 50 Hz@1 Khz, 100 Hz@4 Khz • Multi-channel Dpoae: Simultaneous Measurement Of Dpoaes At Up To Two F2 Frequencies At A Time • Frequencies F2: 1, 1.5, 2, 3, 4, 5, 6, 8 Khz • Stimulus Level L2: 30 To 65 Db Spl; Step Size: 5 Db • L2/l1 Relation: Automatic Scissor Paradigm: L1 = 0.4 L2 + 39 Db Spl) • Snr Stop Criterion: 6, 9, 12 Db • Factory Defaults: Quick Screen And Standard Screen (5,4,3,2,khz, Overall Stop Criterion 3 Out Of 4, As Fast As Possible, Multichannel, Fmdpoae, 55/65 Db, Snr 6 Db), Manual Retest Option " "additional Features: • Simultaneous Measurement On Left/right Ear – (2 Probes Required) • Entertainment Mode For All Oae Modules Available • Optional Database Software - Data Management Easily View, Archive And Export Test Results • Stores Up To 1000 Patients On The Device • With The Pc-sw Database That Can Transfer Test Results Via Usb • Results Can Be Sorted By Birthdate, Name, Id, Examiner, Date, Time • Export Full-color, 8.5” X 11” Reports In Multiple Formats, With Graphic And Tabular Data, Preset Or Free Comments • Easily Attach Test Results To Patient Records With Many Emr Systems • Patient Demographics On Evice • Noah Compatible Technical Specifications: Device Dimensions: 209 X 98 X 52 Mm, Ca. 500 G, Ca. 475 Display: 240 X 320 Pixel; Graphic Lcd 3.5”, Resistive Touch Screen, Real Time-clock, Piezo-electric Sound Generator, Usb, Output Voltage And Nominal Impedance (headphone Socket): 5 Vpp, 32 Ω Power Consumption: Max. 2 W. Memory Capacity: Up To 1000 Patients, Ca. 1000 Tests (dependent On Test Type). Terms Of Reference: Https://cavite.gov.ph/home/tor-medical-equip-c-b/ Invitation To Bid For This Project Is Also Posted At Www.cavite.gov.ph
Closing Date2 Dec 2024
Tender AmountPHP 8.2 Million (USD 142.3 K)

Ilocos Sur Polytechnic State College Tender

Laboratory Equipment and Services
Corrigendum : Tender Amount Updated
Philippines
Details: Description Lot 1: Raw Materials Yacon -400 Kg Tomato -400 Kg Banana -400 Kg Calabash -100 Pc Watermelon -100 Kg Squash -400 Kg Balicutcha -3010 Pc ***see Attached Terms Of Delivery Lot 2: Antibiotic Discs Amoxyxillin Or Amoxicillin (with Or Without Clavulanic Acid). Min. 2ug Or Max. 30ug Discs -1 Pack Ampicillin (with Or Withous Sulbactam), Min. 2ug Or Max. 25ug Discs -1 Pack Clindamycin, Min. 2ug Or Max. 10ug Discs -1 Pack Erythromycin, Min. 5ug Or Max. 30ug Discs -1 Pack Trimethoprim/sulphamethoxazole Or Cotrimoxazole, 25ug Discs -1 Pack ***90 Days Delivery Lot 3: Microbiology Laboratory Supplies And Materials Inoculating Loops, 2-5mm, Stainless Steel Or Nichrome Wire, With Stainless Steel Or Aluminum Handle, 6-7in. -10 Pc Inoculating Needles, Stainless Steel Or Nichrome Wire, With Stainless Steel Or Aluminum Handle, 6-7in -10 Pc Laboratory Spreader, Triangle, 25mm, 90 Or 120 Degree Bend, Glass Or Stainless Steel -2 Pc Laboratory Alcohol Lamp, 250ml, Glass, With Cotton Burner, Wicks And Cap -2 Pc Test Tube Rack, For 16mm Tubes, 60 Holes, Plastic, Autoclavable -2 Pc Test Tube Rack, For 20mm Tubes, 40 Holes, Plastic, Autoclavable -4 Pc Pcr Tube Rack, For 96 0.2ml Pcr Tubes, Plastic, Autoclavable, With Lid/cover -1 Pc Microtube Storage Box, For 1.5ml Microcentrifuge Tubes, 50-81 Wells, Plastic, Autoclavable, With Lid/cover -1 Pc Syringe, 10ml, Plastic, Sterile -50 Pc Staining Jar, Max. 10 Slides, Glass Or Plastic, With Cap -4 Pc Plastic Lab Wash Bottles, Max. 500ml -4 Pc Water Filter Housing Set, 20x2.27inch, 5 Micron, Plastic -4 Set ***90 Days Delivery Lot 4: Probiotics Wine Yeast, 5g -15 Sachet Syab 1 Probiotics For Yogurt -10 Pack Greek Yogurt Starter, 1.2g, 2 Packets -1 Set Probiotics Powder, Water-soluble, For Human Consumption -49 Pack ***90 Days Delivery Lot 5: Sugars And Dairy Products Powdered Sugar -50 Kg Refined Sugar, 50kg -2 Pack Fresh Milk -7 Pack Skimmed Milk Powder -8 Kg Unsweetened Cocoa Powder -8 Kg Distilled Water -400 Gallon ***90 Days Delivery Lot 6: Sweeteners, Geeling Agents Maltodextrin -80 Kg Pectin Powder -5 Pack Guar Gum, 990g -3 Pack Citric Acid -15 Kg Ascorbic Acid -15 Kg Trisodium Phosphate -15 Pack Sodium Metabisulfate -3 Kg Tricalcium Phosphate -15 Bottle Xanthan Gum -15 Pack Aspartame -15 Pack ***90 Days Delivery Lot 7: Microbiology Laboratory Consumables Qualitative Filter Paper, Min. Grade 1 Or Max. Grade 3, 6-11um, Cellulose, Min. 100 Pcs/box -1 Box Disposable Sterile Petri Dishes, Standard Size, 90mm, Plastic -1000 Pc Laboratory Sealing Film, 2in Or 4in Wide X 125ft Or 250ft/roll, Polyolefin/paraffin Wax -5 Roll Inoculating Loops And Needles (double-ended), 1.00-ul Loop Tip, 8in/20cm, Plastic, Sterile -100 Pc Inoculating Loops And Needles (double-ended), 10-ul Loop Tip, 8in/20cm, Plastic, Sterile -100 Pc Inoculating Loops (double-ended), 1.0-ul And 10-ul Tips, 8in/20cm, Plastic, Sterile -100 Pc Laboratory Spreader, Triangle, 25mm, 30 Or 60 Mm, Plastic Sterile -100 Pc Pcr Tubes, 0.2ml, Plastic, Autoclavable, With Caps, 500-1000 Pcs/pack -1 Pack Microcentrifuge Tubes, 1.5ml, Plastic, Autoclavable, With Attached Caps, 500-1000 Pcs/pack -1 Pack Micropipette Tips, 10ul, Plastic, Autoclavable, 500-1000 Pcs/pack -1 Pack Micropipette Tips, 200ul, Plastic, Autoclavable, 500-1000 Pcs/pack -1 Pack Micropipette Tips, 1000ul, Plastic, Autoclavable, 500-1000 Pcs/pack -1 Pack Serological Pipettes, 25ml, Plastic, Sterile -25 Pc Serological Pipettes, 10ml, Plastic, Sterile -50 Pc Serological Pipettes, 5ml, Plastic, Sterile -50 Pc Microscope Slides, 75x25mm, Glass, 100pcs/box -10 Box Coverslips, #1-2, 22x22mm, Glass, 100pcs/box -10 Box Microscope Lens Cleaning Paper/tissue, 4x6in, 50-100pcs/pack -10 Pack ***90 Days Delivery Lot 8: Microbiology Laboratory Glasswares Graduated Cylinder, 500 Ml, Glass Or Plastic, Autoclavable -1 Pc Graduated Cylinder, 250 Ml, Glass Or Plastic, Autoclavable -1 Pc Graduated Cylinder, 100 Ml, Glass Or Plastic, Autoclavable -1 Pc Graduated Cylinder, 50 Ml, Glass Or Plastic, Autoclavable -1 Pc Graduated Cylinder, 25 Ml, Glass Or Plastic, Autoclavable -1 Pc Graduated Cylinder, 10 Ml, Glass Or Plastic, Autoclavable -1 Pc Beaker, 1000ml, Glass, Autoclavable -5 Pc Beaker, 500ml, Glass, Autoclavable -5 Pc Beaker, 250ml, Glass, Autoclavable -5 Pc Beaker, 100ml, Glass, Autoclavable -5 Pc Beaker, 50ml, Glass, Autoclavable -5 Pc Screw Cap Culture Media Glass Bottle, 1000ml, Plastic Screw Cap, Autoclavable -5 Pc Screw Cap Culture Media Glass Bottle, 500ml, Plastic Screw Cap, Autoclavable -5 Pc Screw Cap Culture Media Glass Bottle, 250ml, Plastic Screw Cap, Autoclavable -5 Pc Glass Petri Dishes, Standard Size, 90mm, Autoclavable -100 Pc Screw Cap Culture Tubes, 20x150mm, Glass, Plastic Screw Cap, Autoclavable -20 Pc Screw Cap Culture Tubes, 20x125mm, Glass, Plastic Screw Cap, Autoclavable -50 Pc Screw Cap Culture Tubes, 16x125mm, Glass, Plastic Screw Cap, Autoclavable -30 Pc Durham Fermentation Tubes, 6x50mm, Glass -30 Pc ***90 Days Delivery Lot 9: Reagents D-glucose, Powder, Min. 100grams -1 Bottle D-fructose, Powder, Min. 100grams -1 Bottle D-lactose, Powder, Min. 100grams -1 Bottle L-cysteine, Powder, Min. 100grams -1 Bottle Calcium Carbonate, Powder, Min. 100grams -1 Bottle Bromocresol Purple, Powder, Min. 100grams -1 Bottle Glycerol Or Glycerin, Min./max. 2 Liters -1 Bottle Gram Staining Kit, Set Of 4 (crystal Violet, Iodine Safranin, Decolorizer/95% Ethyl Alcohol.acetone) Min./max. 500ml Each -1 Kit Immersion Oil, Refractive Index: 1.5, Min. 100ml Dropping Bottle -3 Bottle Sodium Chloride, Powder, Min. 100 Grams -1 Bottle 0.85% Sterile Saline, Normal/physiological, Min./max. 100ml -1 Bottle 0.9% Sterile Saline, Normal/physiological, Min./max. 100ml -1 Bottle Sterile Phosphate Buffered Saline (pbs) Solution, Ph 7.0-7.6, 1-20x, Balanced Salt Solution (bss), Min./max. 100ml -1 Bottle Buffer Solution, Ph 4.0-4.01, Min. 500ml -1 Bottle Buffer Solution, Ph 7.0, Min. 500ml -1 Bottle Hydrochloric Acid, Min. 5m/mol/n, Max. 1liter -1 Bottle Sodium Hydroxide, Min. 1m/mol/n, Min. 500ml -1 Bottle 70%/140proof/absolute Ethyl Alcohol Or Ethanol, Min. 1 Liter -5 Gallon Denatured Or Diluted Alcohol/ethanol, Min. 1 Liter -1 Gallon Hydrogen Peroxide, 6-35%, Max. 1 Liter -1 Bottle Oxidase Or Gordon-mc-leod Or Kovac's Oxidase Or Gaby And Hadley Reagent, Min. 100ml -1 Bottle Calcium Chloride, Powder, Min. 100grams -1 Bottle Sodium Alginate, Powder, Min. 100grams -1 Bottle 2x Hot Start Pcr Mastermix Solution, Pcr Mix Or Kit, Contains Taq Dna Polymerase, Dntps, Mgc12, Reaction Buffer, And/or 16s Rrna Primer, Min. 10r Or Max. 1500r/rxn/reactions Per Kit, With Nuclease Free Water (a.k.a. Molecular Biology Or Pcr Grade Water) And/or Loading Dye/s -1 Kit 1 Kb Dna Ladder/marker, Min. 10bp Or Max. 50kb, With 1500bp/1.5kbp Band, Min. 150ul Or 25 Ug Or Min./max. 100 Lanes/applications Per Bottle/kit, With Loading Dye/buffer -1 Bottle Nucleic Acid Gel Stain/dye, In Water Or Dmso Or Others, Min. 50ul Per Bottle Per Pack -1 Bottle Lot 10: Microbiological Reagent And Standard Anaerobic Gas Pack, 2.5-7 Liters Capacity, Pack Of 10 Foil Bags/sachets -10 Pack Anaerobic Or Resazurin Indicator, 2.5-7 Liters Capacity, Pack Of 10-100 Pcs./strips/tablets -10 Pc 3 Mcfarland Standard Set, 0.5, 1-4 Or 5, In Tubes -1 Set ***90 Days Delivery Lot 11: Microbiological Culture Media And Components Nutrient Agar, Min. 500grams, Powder Or Granulated -1 Bottle Nutrient Broth, Min. 500grams, Powder Or Granulated -1 Bottle Mrs Agar, Min. 500grams, Powder Or Granulated -2 Bottle Mrs Broth, Min. 500grams, Powder Or Granulated -2 Bottle Peptone Water, Min. 500grams, Powder Or Granulated -1 Bottle Buffered Peptone Water, 500grams, Powder Or Granulated -1 Bottle Triple Sugar Iron Agar, Min. 500grams, Powder Or Granulated -1 Bottle Phenol Red Broth Base, Min. 500grams, Powder Or Granulated -1 Bottle Phenol Red Sucrose Broth, Min. 500grams, Powder Or Granulated -1 Bottle Phenol Red Lactose Broth, Min. 500grams, Powder Or Granulated -1 Bottle Fluid Thioglycollate Medium Or Broth, Min. 500grams, Powder Or Granulated -1 Bottle Blood Agar Base, Min. 500grams, Powder Or Granulated -1 Bottle Blood Agar Plates, Sterile Prepared, Pack Of Min. 5 Plates -5 Pack Yeast Extract, Min. 500grams, Powder Or Granulated -1 Bottle Peptone, Min. 500grams, Powder Or Granulated -1 Bottle Bile Salts, Powder, Min. 250grams -1 Bottle Sheep Blood, Min. 250ml -1 Bottle ***90 Days Delivery Lot 12: Janitorial Air Freshener, Aerosol Type, Non-toxic, Low Vocs, Odor Neutralizing, 300-400ml Or 250-350g Per Can -10 Can Dust Pan, 11x5in, Plastic -3 Piece Furniture Cleaner, Spray/foam/liquid, Non-toxic, 500ml-1l Or 500g-1kg Per Can -5 Can Mop Bucket, Heavy Duty, 20-35l, Plastic, With Wringer And Handle -3 Unit Scouring Pad, 6x4.5in, Min. 5pcs Per Pack -20 Pack Toilet Tissue Paper, Virgin/recycled Paper Pulp, 2 Ply, 12 Rolls Per Pack -10 Pack Wastebasket, Plastic, 5-11l -3 Piece Broom, Walis Tambo, Regular -3 Piece Cleaner, Toilet And Urinal, 750ml-1l Or 800g-1kg Per Bottle -10 Bottle Cleanser, Scouring Powder, 350-500g Per Can -10 Can Disinfectant Spray, Aerosol, 650-950ml Or 500-700g Per Can -10 Can Hand Soap, Liquid, Gel/foam/cream, Antibacterial, 500ml-1l Per Bottle -10 Bottle Insecticide, Aerosol Type, 450-600ml Or 400-500g Per Can -5 Can Tissue, Interfolded Paper Towel, Virgin/recycled Paper Pulp, 2-ply, 20x20cm, Min. 150 Sheets Per Pack -30 Pack Trashbag, Max. Xxl Size, Plastic, 10pcs/pack -10 Pack/roll Mophandle, Heavy Duty, Stainless Steel, 4-6ft -3 Unit Mophead, Heavy Duty, Rayon, 400-900g -3 Unit Bleaching & Disinfecting Solution, 5-6% Sodium Hypochlorite, Max. 5l Per Container -50 Liter Instant Dishwashing Liquid, Powder, 250g-1kg Per Pack -10 Pack Sponge, Large, Heavy Duty Scrubber -100 Piece Microfiber/absorbent Cleaning Cloth, Superfine, 20x30cm -100 Piece Long Terry Cloth Towel, Cotton, 16-24x24-36in, 400-600gsm -49 Piece Bottle Brush/sponge, Nylon Brush/sponge, Stainless Steel/wire/plastic Handle, Diameter: 1-3in, Length: 9-18in -5 Piece ***90 Days Delivery Lot 13: Food Laboratory Supplies And Materials Mixing Bowls Set, Set Of 5: Smallest To Largest Sizes, Stainless Steel -6 Set Wire Whisk, Stainless Steel, Length: 10-14in. -6 Piece Glass Measuring Cups Set, Set Of 3 Or 4: 250ml, 500ml, 1l, And 2l, With Spouts And Handles 6 Set Stainless Measuring Spoons Set, Set Of 6: 1/8, 1/4, 1/2, 1 Tsp, 1/2, And 1 Tbsp., Stainless Steel, With Detachable Ring -6 Set Chopping Boards Set, Set Of 3: Small, Medium, To Large, Plastic, Different Colors -6 Set Chef's Knife, Length: 8-10in., Stainless Steel Blade And Handle -6 Piece Kitchen Scissors/shears, Stainless Steel Micro-serrated Blades, With Bone Notch, Non-slip Handle, Length: 8-10in. -6 Piece Peeler, Stainless Steel, Length: 6-7 In. -6 Piece Stainless Utility Basin, Stainless Steel, Sizes: Small, Medium, To Large, Flat Bottom -6 Piece Strainer, Stainless Steel, Diameter: Min. 3in., Max. 12 In., Mesh Size: Min. 1/16in., Max. 1/4 In., With Handle And Hook -6 Piece Colander, Stainless Steel, Free-standing, Sizes: Small, Medium, Large -6 Piece Mesh Sieve, 400 Mesh, 37um, Stainless Steel, Full Height, Diameter: 8 Or 12in. -6 Piece Mesh Sieve, 200 Mesh, 74um, Stainless Steel, Full Height, Diameter: 8 Or 12in. -6 Piece Mesh Sieve, 100 Mesh, 149um, Stainless Steel, Full Height, Diameter: 8 Or 12in. -6 Piece Cheesecloth, Cotton, Grade 50 (28x40tpi), 60 (32x28), Or 90 (44x36), Multi-piece Packs, Max. 2 Sq.yds./pc -15 Packs Aluminum Foil, Jumbo Size, Heavy Duty Or Extra Heavy Duty, Bright And Matte Sides -5 Roll Casserole With Cover And Stainless Handles, Stainless Steel, Min. 500ml To Max. 5l -6 Piece Wooden Ladle, Diameter: 3-4in., Length: 12-15in., Rounded Bowl And Long Handle -6 Piece Stainless Stell Soup Ladle, 4-12oz., Length: 12-15in., Rounded Bowl -6 Piece Kitchen/food Tongs, Stainless Steel, Length: 9-12in., Scalloped Tips, With Lock -6 Piece Canning Jar/lifting Tongs, Stainless Steel, Length: 9-11 In., Non-slip Grips, Wide Grip -6 Piece Cupcake Pan, Mini, Standard, And Jumbo Size, Nonstick -5 Piece Baking Pans Set, Set Of 6: Full, 3/4, 1/2, 1/4, And 1/8 Sheets, Nonstick, Rimmed, With Or Without Handles -1 Set Cooling Rack, Stainless Steel, Full And Half Sheet, Elevated Feet -6 Piece Utility Tray, Stainless Steel, Size: Small, Medium, Large, Rounded Corners, Lipped -10 Piece Chafing Dishes Set, Set Of 6, Stainless Steel, 8 Quarts, With Lid And Handles, Stackable -1 Set ***90 Days Delivery Lot 14: Protective Equipment And First Aid Materials Laboratory Gowns, Long Sleeves, Gartered Cuffs, With Pockets, Medium -3 Piece Laboratory Gowns, Long Sleeves, Gartered Cuffs, With Pockets, Large -3 Piece Laboratory Gowns, Long Sleeves, Gartered Cuffs, With Pockets, Extra Large -3 Piece Laboratory Gown With Hat, Long Sleeves, Gartered Cuffs, Medium -3 Piece Laboratory Gown With Hat, Long Sleeves, Gartered Cuffs, Large -3 Piece Laboratory Gown With Hat, Long Sleeves, Gartered Cuffs, Extra Large -3 Piece Disposable Head Cap, 100pcs -5 Pack Disposable 3-ply Face Masks -10 Box Disposable Nitrile Gloves, Small -3 Box Disposable Nitrile Gloves, Medium -3 Box Disposable Nitrile Gloves, Large -3 Box Disposable Shoe Cover -10 Box Gauze, 24x48 -1 Roll Cotton, 150g -5 Pack
Closing Soon28 Nov 2024
Tender AmountPHP 970.8 K (USD 16.4 K)

Municipality Of Tiaong, Quezon Tender

Civil And Construction...+1Civil Works Others
Philippines
Details: Description 605 Project Signboard Quantity: 5.76 Sq.m. Materials: 1.0 Ordinary Plywood ( 1/2" X 4' X 8') 2.00 Pc 2.0 Coco Lumber (2" X 3" X 12') 5.00 Pc 3.0 Tarpaulin (4' X 8') 1.00 Unit 4.0 Assorted Cwn 1.00 Kg Labor: 1 Skilled Worker 0.50 Day 2 Laborer 0.50 Day Spl - 1 Occupational Safety & Health Program Quantity: 1.00 Lot Materials: 1.0 Safety Helmet 10.00 Pc 2.0 Hand Gloves 10.00 Pair 3.0 Safety Shoes 10.00 Pair 4.0 Safety Glasses 10.00 Pc 5.0 Welding Mask Hat Type (safety Glasses With Shields) 1.00 Pc 6.0 Welding Apron (leather With Sleeves) 1.00 Pc 7.0 Welding Gloves 1.00 Pair 8.0 Safety Harness 5.00 Pc 9.0 Longsleeve Shirt 10.00 Pc 10.0 Miscellaneous Items 1.00 Lot (medicine, Medicine Cabinet, Water, First-aid Kit) 105 Subgrade Preparation Quantity: 249.38 Sq.m Labor: 1 Foreman 3.00 Day 1 Skilled Worker 3.00 Day 2 Unskilled Worker 3.00 Day Equipment: 1 Road Roller 1.00 Hr 1 Road Grader 1.00 Hr 104 Embankment Quantity: 24.94 Cu.m Materials: 1.0 Selected Borrow Materials 26.00 Cu.m Labor: 1 Foreman Day 1 Skilled Worker 2.00 Day 1 Unskilled Worker 2.00 Day Equipment: 1 Road Roller 0.50 Hr 1 Payloader 0.50 Hr 201 Aggregate Base Course Quantity: 24.10 Cu.m Materials: 1.0 Aggregate Base Course 25.50 Cu.m Labor: 1 Foreman 2.00 Day 1 Skilled Worker 2.00 Day 2 Unskilled Worker 2.00 Day Equipment: 1 Water Truck 1.00 Hr 1 Road Roller 1.00 Hr 1 Road Grader 1.00 Hr 803 Structure Excavation Quantity: 82.36 Cu.m Labor: 1 Foreman 3.00 Day 1 Skilled Worker 3.00 Day 2 Unskilled Worker 3.00 Day Equipment: 1 Backhoe With Dozer 8.00 Hr 1 Tamping Rammer 8.00 Hr 804 Gravel Fill Quantity: 2.28 Cu.m Materials: 1.0 Crushed Aggregates 2.50 Cu.m Labor: 1 Foreman 1.00 Day 1 Skilled Worker 1.00 Day 2 Unskilled Worker 1.00 Day Equipment: 1 Tamping Rammer 2.00 Hr 901 Lean Concrete (2000 Psi) Quantity: 1.92 Cu.m Materials: 1.0 Cement 15.00 Bag 2.0 Sand 1.00 Cu.m 3.0 Gravel 2.00 Cu.m Labor: 1 Foreman 1.00 Day 1 Skilled Worker 1.00 Day 3 Unskilled Worker 1.00 Day Equipment: 1 One Bagger Mixer 1.00 Day 900 Structural Concrete Quantity: 32.07 Cu.m Materials: Column Footing/wall Footing 1.0 Ready Mix Concrete, 3500psi 8.00 Cu.m Column/pedestal 1.0 Ready Mix Concrete, 3500psi 7.50 Cu.m Roof Beam 1.0 Ready Mix Concrete, 3500psi 3.50 Cu.m Slab On Grade 1.0 Ready Mix Concrete, 3000psi 16.00 Cu.m Labor: 1 Foreman 11.00 Day 2 Skilled Worker 11.00 Day 8 Unskilled Worker 11.00 Day Equipment: 1 Backhoe Day 1 Concrete Vibrator 2.00 Day 902 Reinforcing Steel Bars, Grade 60 Quantity: 4,008.38 Kg Materials: Column Footing/wall Footing 1.0 Reinforcing Steel 911.50 Kg 2.0 Gi Tie Wire 14.00 Kg Column/pedestal 1.0 Reinforcing Steel 851.50 Kg 2.0 Gi Tie Wire 13.00 Kg Roof Beam 1.0 Reinforcing Steel 370.50 Kg 2.0 Gi Tie Wire 6.00 Kg Slab On Grade 1.0 Reinforcing Steel 1,875.00 Kg 2.0 Gi Tie Wire 28.50 Kg 3.0 Consumables 1.00 Lot Labor: 1 Foreman 10.00 Day 2 Skilled Worker 10.00 Day 8 Unskilled Worker 10.00 Day Equipment: 1 Bar Cutter 4.00 Day 1 Bar Bender 4.00 Day 903 Formworks (scaffolding Included) Quantity: 145.54 Sq.m Materials: Column Footing/wall Footing 1.0 Form Plywood 13.00 Pc 2.0 Form Lumber 911.50 Bd.ft. 3.0 Asstd. Nails 21.00 Kg Column/pedestal 1.0 Form Plywood 28.00 Pc 2.0 Form Lumber 851.50 Bd.ft. 3.0 Asstd. Nails 19.50 Kg Roof Beam 1.0 Form Plywood 11.00 Pc 2.0 Form Lumber 370.50 Bd.ft. 3.0 Asstd. Nails 8.50 Kg Slab On Grade 1.0 Form Plywood 2.00 Pc 2.0 Form Lumber 1,875.00 Bd.ft. 3.0 Asstd. Nails 42.50 Kg 4.0 Consumables Lot Labor: 1 Foreman 13.00 Day 2 Skilled Worker 13.00 Day 8 Unskilled Worker 13.00 Day Equipment: 15 Scaffolding Set, 1.7m X 1.8m X 1.25m 75.00 Day Spl 2 Masonry Works Quantity: 221.53 Sq.m Materials: 1.0 4" Chb 2,908.00 Pc 2.0 Cement 553.00 Bag 3.0 Sand 30.50 Cu.m 4.0 Reinforcing Steel Bars 511.72 Kg 5.0 Gi Tie Wire 8.50 Kg Labor: 1 Foreman 12.00 Day 2 Skilled Worker 12.00 Day 8 Laborer 12.00 Day Hauling Cost 1.00 Lot Equipment: 1 One Bagger Mixer 5.00 Day Spl 3 Welded Wire Mesh (steel Matting) Quantity: 37.55 Sq.m Materials: 1.0 50mm Welded Wire Mesh 40.00 Sq.m 2.0 25mm Flat Bar 7.00 Pc 3.0 75mmø Gi Pipe Sch. 40 2.00 Pc 4.0 Welding Rod 4.00 Kg 5.0 12mm X 350mm X 350mm Base Plate 4.00 Pc 6.0 M12 Anchor Bolt 16.00 Pc 7.0 Chemical Anchor 1.00 Unit Painting 1.00 Lot Labor: 1 Foreman 3.00 Day 1 Skilled Worker 3.50 Day 2 Laborer 4.00 Day 110 Doors And Windows Quantity: 13.83 Sq.m Materials: 1.0 Steel Matting Double Panel Door 6.75 Sq.m 2.0 Steel Matting Single Panel Door 3.38 Sq.m 3.0 Solid Wooden Door 2.10 Sq.m 4.0 Steel Matting Window 1.44 Sq.m 5.0 Awning Window 0.16 Sq.m 6.0 Miscellaneous Items (hinges, Locksets, Etc.) 1.00 Lot Labor: 1 Foreman 2.00 Day 2 Skilled Worker 2.00 Day 2 Laborer 2.50 Day Spl 4 Roofing Works Quantity: 237.16 Sq.m Materials: 1.0 Pre-painted Long Span Rib-type 0.5 245.00 L.m 2.0 Pre-painted Ridge Roll 25.00 L.m 3.0 End Flashing 20.00 L.m 4.0 Gutter 49.00 L.m 5.0 Fascia Board 28.00 Pc 6.0 Tekscrew 1,744.00 Pc 7.0 Blind Rivet 1.00 Box 8.0 Metal Drill Bit 1.00 Box 7.0 Vulca Seal 1.00 Liter 8.0 3" Pvc Pipe (downspout) 12.00 Pc 9.0 3" Pvc Elbow 36.00 Pc 12.0 Miscellaneous Lot Labor: 1 Foreman 7.00 Day 2 Skilled Worker 7.00 Day 8 Laborer 7.50 Day Spl 5 Steel Works (roof Framing) Quantity: 4,000.17 Kg Materials: 1.0 C-purlins 2x3 22.00 Pc 2.0 Channel Bar 2x4 1,696.31 Kg 3.0 Welding Rod 126.00 Kg 4.0 Turco Rust Converter 5.00 Gal 4.0 Epoxy Primer 6.00 Gal 6.0 Epoxy Paint 12.00 Gal 7.0 Paint Brush 6.00 Pc 7.0 Miscellaneous Lot Labor: 1 Foreman 8.00 Day 2 Skilled Worker 9.00 Day 8 Laborer 10.00 Day 1003 Ceiling Works (storage And Cr) Quantity: 30.00 Sq.m Materials: 1.0 Wall Angle 11.00 Pc 2.0 Carrying Channel 8.00 Pc 3.0 Metal Furring 12.00 Pc 4.0 Rod Suspension Hanger With Adjustment Spring 35.00 Set 5.0 Asstd Nails 1.00 Kg 6.0 Hardiflex 1/4" 11.00 Pc 7.0 Self-drilling Screws 252.00 Pc 8.0 Fiberglass Mesh Tape 2.00 Pc Labor: 1 Foreman 2.00 Day 1 Skilled Worker 2.50 Day 1 Laborer 2.50 Day Spl 6 Comfort Room (pipelines Included) Quantity: 10.00 Sq.m Materials: 1.0 30x30 Ceramic Tiles 117.00 Pc 2.0 Tile Adhesive 25kg 3.00 Bag 3.0 Tile Grout 2kg 2.00 Bag 4.0 Water Closet Package (toilet Bowl With Bidet) 3.00 Set 5.0 Cubicle 3.00 Set 6.0 Ss Lavatory 1.00 Pc 7.0 Cement (countertop) 1.00 Bag 8.0 Sand 0.50 Cu.m 9.0 Rebars 7.50 Kg 10.0 Pipelines (water Supply And Waste Water) 1.00 Lot 11.0 Miscellaneous Lot Labor: 1 Foreman 7.00 Day 2 Skilled Worker 8.00 Day 3 Laborer 8.00 Day Spl 7 Booth Partitions Quantity: 59.50 Sq.m Materials: Welding Booths: 1.0 Plain Sheet 42.00 Pc 2.0 Angle Bar 624.24 Kg 3.0 Welding Rod 20.00 Kg Grinding Booths: 1.0 Hardiflex 12.00 Pc 2.0 2x2x12 Lumber 74.50 Bd.ft 3.0 Asstd. Nails/screws 2.00 Kg Bench Work Area: 1.0 Hardiflex 6.00 Pc 2.0 2x2x12 Lumber 63.00 Bd.ft 3.0 Asstd. Nails/screws 1.50 Kg Materials Preparation Area: 1.0 Hardiflex 3.00 Pc 2.0 2x2x12 Lumber 37.50 Bd.ft 3.0 Asstd. Nails/screws 1.00 Kg Labor: 1 Foreman 11.00 Day 2 Skilled Worker 12.00 Day 4 Laborer 11.00 Day 1032 Painting Works (concrete And Metal) Quantity: 853.04 Sq.m Materials: 1.0 Skimcoat 142.00 Bag 2.0 Flat Latex Primer 22.00 Gal 3.0 Semigloss Latex Paint 44.00 Gal 4.0 Turco Rust Converter 10.00 Gal 4.0 Epoxy Primer 15.00 Gal 6.0 Aluminum/epoxy Paint 30.00 Gal 5.0 Paint Thinner 1.00 Gal 6.0 Tinting Color 1.00 Gal Labor: 1 Foreman 7.00 Day 5 Skilled Worker 7.00 Day 4 Laborer 7.00 Day Spl 8 Electrical Works Quantity: 1.00 Lot Materials: 1.0 25at, 2p Circuit Breaker 5.00 Pc 2.0 40at, 2p Circuit Breaker 26.00 Pc 3.0 55at, 2p Circuit Breaker 14.00 Pc 4.0 225at, 2p Circuit Breaker 1.00 Pc 5.0 Panelboard 20 Branches 1.00 Unit 6.0 Pullbox 3.00 Pc 7.0 #12 3.5mm2 Thhn Wire 5.00 Box 8.0 #8 8.0mm2 Thhn Wire 150meters Box 7.00 Box 9.0 #4/0 100mm2 Thhn Wire 130.00 Mtr 10.0 Led Light Bulb 12w Daylight W/ Receptacle 24.00 Set 11.0 Led Fluorescent Light 18w With Fixtures 17.00 Set 12.0 Emt/rmc Pipe 2" 2.00 Pc 13.0 Emt/rmc Pipe 1/2" 22.00 Pc 14.0 Pvc Pipe 2" 26.00 Pc 15.0 Pvc Pipe 1" 10.00 Pc 16.0 Pvc Pipe 1/2" 12.00 Pc 17.0 Full Threaded Rod 4.00 Pc 18.0 Two-gang Convenience Outlet 23.00 Pc 19.0 One-gang Switch 16.00 Pc 20.0 Two-gang Switch 3.00 Pc 21.0 Juction Box 45.00 Pc 22.0 Utility Box 45.00 Pc Other Materials: 1.0 Solar Spotlight 3.00 Unit 2.0 Industrial Exhaust Fan Heavy Duty 1hp 3.00 Unit Labor: 4 Electrician 25.00 Day 2 Helper 25.00 Day 311 Pccp Quantity: 6.15 Cu.m. Materials: L=41lm : W =1.5m T = 0.10m 1.0 Aggregate Basecoarse 8.00 Cu.m. 2.0 Cement 62.00 Bag 3.0 Sand 5.00 Cu.m. 4.0 Gravel 8.00 Cu.m. 5.0 2" X 4" X 12' Form Lumber 20.00 Pc 6.0 Assorted Cwn 5.00 Kg Labor: 1 Foreman 6.00 Day 2 Skilled Worker 6.00 Day 2 Laborer 6.00 Day Equipment: 1 One-bagger Mixer 6.00 Day 1 Plate Compactor 8.00 Hr S U M M A R Y Item Description 0 Mobilization/demobilization 605 Project Signboard Spl - 1 Occupational Safety & Health Program 0 Survey And Staking 105 Subgrade Preparation 104 Embankment 201 Aggregate Base Course 803 Structure Excavation 804 Gravel Fill 901 Lean Concrete (2000 Psi) 900 Structural Concrete 902 Reinforcing Steel Bars, Grade 60 903 Formworks (scaffolding Included) Spl 2 Masonry Works Spl 3 Welded Wire Mesh (steel Matting) 110 Doors And Windows Spl 4 Roofing Works Spl 5 Steel Works (roof Framing) 1003 Ceiling Works (storage And Cr) Spl 6 Comfort Room (pipelines Included) Spl 7 Booth Partitions 1032 Painting Works (concrete And Metal) Spl - 2 Furnitures (benches/tables, Table, Chair, Shelves) Spl 8 Electrical Works 311 Pccp
Closing Date2 Dec 2024
Tender AmountPHP 3.5 Million (USD 61.7 K)

Museovirasto Tender

Finland
Details: Collection Center The shelf systems The services associated with them are acquired by the Finnish Museum Agency’s Collection and Conservation Centre (experience) Vantaa during the years 2016 and 2020 as part of Koke’s Construction Conltaing Con.s as part of a diverse shelf system from two different suppliers. The shelf systems are being updated and acquired new shelf systems to replace some of the old shelf systems and to complement the old shelf systems. The shelf systems are required for the preservation of the collections of the Finnish National Museum/Finnish National Museum and the Collections of the Finnish Museum Agency. Acquire the full structure of the Shelter Planning, Implementation and Installation. Parts of the whole can be deposited inside the dynamic purchasing system, either in one or separately. As part of the Purchase Entity Orders New Hydrogen Planning Services from a Dynamic Supplier Staed to a Dynamic Procurement System, the Supplier must implement the plans so that the design does not include Exclusive Elements or Other Restrictions, which would prevent other Dynamic Procurement System Accredited Operators from offering the Planned Model System. Providers are always reserved in the context of the Dynamic Procurement System’s In. Deposits, with the publicity to get to know the premises before leaving the Offer. Offers from the shelf systems are always delivered, Installation supplies removed and Hylly systems must be provided with a 5-year warranty. Defin. of active installation methods shall include Rastin and Device Costs. Suppliers have the option to use the Trucks and Nostim on the item if they are free of any other use. Hydrogen systems are implemented in self-managed farms, in which conditions vary from -25 to 20c and Osaidity by 25 to 55%. The shelf systems are mainly metal frames, but can contain as wood, plastic as canngas, e.g. shelf materials or attachment systems. The Provider shall also, if necessary, ensure from the User what materials and surface mediators in Salita.uctures. Ma.ls should be such that they are not harmful to museum objects, and not harmful gases for museum objects. The shelves are designed and calculated according to the preservative structure. The whole ranges from the size of the Nuppineula Esin Koko over 15m3 to the sized driving tools and boats. Collections Includes: - Sea Museum Collections: Venite, Engine and Technical Devices - Archaeological Collections: From Keramika to Swords Art Collections: Oil Painting, Graphics and Veistoks - Cultural Historical Collections: From Horses to Rysy Photography: Negatives and Vedics Archives. The Procurement is Related to A Project and/or By Byd by European Union Funds
Closing Date31 Dec 2025
Tender AmountEUR 700 K (USD 757.5 K)

Department Of Labor And Employment Tender

Publishing and Printing
Philippines
Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Closing Date9 Dec 2024
Tender AmountPHP 1.1 Million (USD 19 K)

Province Of Iloilo Tender

Laboratory Equipment and Services
Philippines
Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Laboratory Supplies Bid No. Iph-24-1467-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 5 1. Scope Of Bid 5 2. Funding Information 5 3. Bidding Requirements 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders 5 6. Origin Of Goods 6 7. Subcontracts 6 8. Pre-bid Conference 7 9. Clarification And Amendment Of Bidding Documents 7 10. Documents Comprising The Bid: Eligibility And Technical Components 7 11. Documents Comprising The Bid: Financial Component 7 12. Bid Prices 8 13. Bid And Payment Currencies 8 14. Bid Security 8 15. Sealing And Marking Of Bids 9 16. Deadline For Submission Of Bids 9 17. Opening And Preliminary Examination Of Bids 9 18. Domestic Preference 9 19. Detailed Evaluation And Comparison Of Bids 9 20. Post-qualification 10 21. Signing Of The Contract 10 Section Iii. Bid Data Sheet 11 Section Iv. General Conditions Of Contract 12 1. Scope Of Contract 12 2. Advance Payment And Terms Of Payment 12 3. Performance Security 12 4. Inspection And Tests 12 5. Warranty 13 6. Liability Of The Supplier 13 Section V. Special Conditions Of Contract 14 Section Vi. Schedule Of Requirements 16 Section Vii. Technical Specifications 18 Section Viii. Checklist Of Technical And Financial Documents 20   Section I. Invitation To Bid Purchase Of Laboratory Supplies Bid No. Iph-24-1467-b 1. The Iloilo Provincial Government Through The Supplemental Budget No. 1 Cy 2024 Intends To Apply The Sum Of One Million Five Hundred Ninety-two Thousand Four Hundred Pesos (php 1,592,400.00) Being The Abc To Payments Under The Contract For The Purchase Of Laboratory Supplies Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On November 27, 2024 At The Bac Office, 5th Floor, New Iloilo Provincial Capitol And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office,5th Floor, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before December 11, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024 At 9:01 A.m. At The Bac Office, 5th Floor, New Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 14, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Laboratory Supplies With Bid No. Iph-24-1467-b. The Procurement Project (referred To Herein As “project”) Is Composed Of Forty-four (44) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of One Million Five Hundred Ninety-two Thousand Four Hundred Pesos (php 1,592,400.00). The Source Of Funding Is: A. Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Iloilo Provincial Hospital, Pototan Iloilo Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To Error! Reference Source Not Found.. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Glucose Reagent 400ml 4 4 2 Cholesterol Reagent 400ml 4 4 3 Triglycerides Reagent 400ml 2 2 4 Uric Acid Reagent 400ml 3 3 5 Urea/bun Reagent 300ml 3 3 6 Hdl Cholesterol Reagent 250ml 1 1 7 Normal Control 5x5ml 5 5 8 Pathologic Control 5x5ml 5 5 9 Sgpt Reagent 500ml 3 3 10 Typing Sera (anti-a, Anti-b) 10cc 100 100 11 Anti D 10cc (rh Typing) 70 70 12 Antibody Enhancement (liss) 10cc 30 30 13 Anti Human Globulin 10cc 30 30 14 Dengue Test Kit (duo, Igg,igm, Ns1) 25's 10 10 15 Crp Reagent 150's 15 15 16 Aso Titer Reagent 100's 2 2 17 Troponin I Cassette 40's 10 10 18 Thermal Paper 57mmx10m 200 200 19 Wooden Applicator Sticks 1000's 20 20 20 Paper Towel 176pulls 100 100 21 Distilled Water 10ltrs 30 30 22 H. Pylori Antibody 25's 2 2 23 Glucose Tolerance Test Beverage (75 G. Dextrose) 200 200 24 Hema Stain (500ml) 5 5 25 Urine Strips 4 Parameter 100 100 26 0.5ml Microtainer Lavender Top 100's 100 100 27 5ml Red Top Plain Tubes Glass 100s 50 50 28 10ml Red Top Plain Tubes Glass 100's 10 10 29 Sedi Rate Esr Pipette Westergreen 200’s 2 2 30 Microlancets 200's G23 20 20 31 Microhematocrit Tubes, Heparinized Red Tip 1000's 3 3 32 Yellow Pipettor Tips 1000's 100 100 33 Blue Pipettor Tips 500's 30 30 34 G3+ Cartridge 25's For Istat Machine 24 24 35 Tri Control Level I (10x1.7ml) For Istat Machine 1 1 36 Tri Control Level Ii (10x1.7ml) For Istat Machine 3 3 37 Tri Control Level Ill (10x1.7ml) For Istat Machine 1 1 38 Leptospirosis 30's Igg/igm 3 3 39 Hbsag Strips 50's Igg/igm 6 6 40 Salmonella Typhi 30's Igg/igm 5 5 41 Heparinized Syringe 3cc 400 400 42 Black Top Tubes 2.4ml Citrated Glass 100's 6 6 43 Yellow Tap Tubes (gel Separator) 4ml Glass 10 10 44 Creatinine Reagent (jaffe, Kinetic) 400ml 8 8 _______________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Iph-24-1467-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Glucose Reagent 400ml 2 Cholesterol Reagent 400ml 3 Triglycerides Reagent 400ml 4 Uric Acid Reagent 400ml 5 Urea/bun Reagent 300ml 6 Hdl Cholesterol Reagent 250ml 7 Normal Control 5x5ml 8 Pathologic Control 5x5ml 9 Sgpt Reagent 500ml 10 Typing Sera (anti-a, Anti-b) 10cc 11 Anti D 10cc (rh Typing) 12 Antibody Enhancement (liss) 10cc 13 Anti Human Globulin 10cc 14 Dengue Test Kit (duo, Igg,igm, Ns1) 25's 15 Crp Reagent 150's 16 Aso Titer Reagent 100's 17 Troponin I Cassette 40's 18 Thermal Paper 57mmx10m 19 Wooden Applicator Sticks 1000's 20 Paper Towel 176pulls 21 Distilled Water 10ltrs 22 H. Pylori Antibody 25's 23 Glucose Tolerance Test Beverage (75 G. Dextrose) 24 Hema Stain (500ml) 25 Urine Strips 4 Parameter 26 0.5ml Microtainer Lavender Top 100's 27 5ml Red Top Plain Tubes Glass 100s 28 10ml Red Top Plain Tubes Glass 100's 29 Sedi Rate Esr Pipette Westergreen 200’s 30 Microlancets 200's G23 31 Microhematocrit Tubes, Heparinized Red Tip 1000's 32 Yellow Pipettor Tips 1000's 33 Blue Pipettor Tips 500's 34 G3+ Cartridge 25's For Istat Machine 35 Tri Control Level I (10x1.7ml) For Istat Machine 36 Tri Control Level Ii (10x1.7ml) For Istat Machine 37 Tri Control Level Ill (10x1.7ml) For Istat Machine 38 Leptospirosis 30's Igg/igm 39 Hbsag Strips 50's Igg/igm 40 Salmonella Typhi 30's Igg/igm 41 Heparinized Syringe 3cc 42 Black Top Tubes 2.4ml Citrated Glass 100's 43 Yellow Tap Tubes (gel Separator) 4ml Glass 44 Creatinine Reagent (jaffe, Kinetic) 400ml _______________________ Signature Over Printed Name   Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.
Closing Date11 Dec 2024
Tender AmountPHP 1.5 Million (USD 27 K)

Province Of Iloilo Tender

Others
Philippines
Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Housekeeping Supplies Bid No. Sjh-24-1608-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications ……………………………………17 Section Viii. Checklist Of Technical And Financial Documents …………..22 Section I. Invitation To Bid Purchase Of Housekeeping Supplies Bid No. Sjh-24-1608-b 1. The Iloilo Provincial Government Through The Mooe Sb#1, 2024 Gen. Fund. Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos (₱1,500,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Housekeeping Supplies. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project.delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On November 20, 2024 At The 5th Floor Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol On Or Before December 4, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 4 At 9:01 A.m.at The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Governmentreserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 5, 2024 Atty. Dennis T. Ventilacion Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Governmentwishes To Receive Bids For The Purchase Of Housekeeping Supplies With Bid No. Sjh-24-1608-b. The Procurement Project (referred To Herein As “project”) Is Composed Of Sixty Three (63) Item's, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of One Million Five Hundred Thousand Pesos(₱1,500,000.00). 2.2. The Source Of Funding Is: A. Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Orib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause5.3 Should Have Been Completed Within Three (3) Yearsprior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In:philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp[san Joaquin Mother And Child Hospital, San Joaquin, Iloilo]or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To San Joaquin Mother Child Hospital, San Joaquin, Iloilo.risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Alcohol ,ethyl, 70% Isoprophyl , Gallon 50 50 2 Battery Charger ,aa, 4's 2 2 3 Battery, Rechargeable, Aa, 4s 20 20 4 Bleaching Solution, 1 Gal, Original / Lemon 200 200 5 Bleaching Solution, Color Safe, 3600ml 150 150 6 Boots, Size 9 8 8 7 Boots, Size10 15 15 8 Broom, Soft, Thick 50 50 9 Bulb Capsule, 15w, Led Type 40 40 10 Bulb, Led, 9w 40 40 11 Chlorine Granules, 40 Kg,container 2 2 12 Clothes Pin, 1kg 5 5 13 Cockroach Killer Spray 15 15 14 Curtain, Thick, Blue, Abstract Design With Ring Holes, 7ft Length (one Design Only) 40 40 15 Detergent Powder, 2 Kg 150 150 16 Detergent Powder, 1 Kg 125 125 17 Dishwashing Liquid, 1 Gallon, Antibac 30 30 18 Disinfectant , Floor Tile Cleaner, 1gal, Antibac, Lemon/orange Scent 55 5 19 Disinfectant, Sodium Hypochlorite Solution, 10% Purity, 1 Gal 15 15 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. 20 Door Mat, Cloth, Cotton 250 250 21 Dust Pan, Big 40 20 22 Electrical Tape, 16m 20 200 23 Fabric Conditioner, Gal 200 200 24 Feather Duster, 20 20 25 Floor Brush With Long Handle, Heavy Duty 20 20 26 Floor Matting L 5meters X W 1 Meter, Rubber, Coarse For Slippery Area, Gray 6 6 27 Garbage Bag Black,medium 2000 200 28 Garbage Bag Black, 37"x40" 6000 6000 29 Garbage Bag Green, 37"x40" 6000 6000 30 Garbage Bag Yellow, 37"x40" 6000 6000 31 Garden Hose,pvc, 1/2", High Quality 50 50 32 Glass Cleaner, Spray, 500 Ml 20 20 33 Hospital Bedsheet Set (1 Fitted, 1 Flat, 1 Pillowcase), Dark Green, 100% Cotton, L-80cm, W-25cm 50 50 34 Hospital Bedsheet Set (1 Fitted, 1 Flat, 1 Pillowcase), Mint Green, 100% Cotton, L-80cm, W-37cm 100 100 35 Industrial Gloves 100 100 36 Laundry Brush, Big 15 15 37 Laundry Gloves, Medium/large, Thick, Long 50 50 38 Liquid Hand Washing Soap, Gal 40 40 39 Mop,wooden Handle W/ Steel Mopholder, Heavy Duty, 100% Cotton 60 60 40 Mop Squeezer With Wringer, Heavy Duty 4 4 41 Mop, Long Dust Mop With Handle, 3layer, Flatbed 110cm Long, 100% Cotton, Heavy Duty 2 2 42 Pail, 24l Capacity 50 50 43 Paper Cup, 260cc 1500 1500 44 Paper Plate 1000 1000 45 Room Freshener Gel For Room 180 G, Assorted Scent 50 50 46 Sack, Thick, 50kg 4000 4000 47 Signage Board Stand (i.e Caution Wet Floor) 6 6 48 Scouring Sponge, Regular Size 50 50 49 Spray Bottle, Portable, Pressurize, 1l, Heavy Duty 25 25 50 Rag For Table, 100% Cotton 200 200 51 Tissue Paper, 2 Ply, Pull-up, Compatible To Tissue Dispenser 50 50 52 Tissue Dispenser Compatible To Tissue Paper 50 50 53 Toilet Bowl Brush W/ Continuous Handle 50 50 54 Toilet Bowl Cleaner, 900ml 20 20 55 Toilet Deodorant Cake, 100gms 300 300 56 Toilet Signage, Male, Green Background 50 50 57 Toilet Signage, Female, Green Background 50 50 58 Toilet Signage, Pwd, Senior Citizen, Pregnant Women , Green Background 2 2 59 Toilet Pump/plunger 29 29 60 Uv Germicidal Light Disinfection Lamp 2 2 61 Waste Bin, Pedal Type 50l Capacity, Color Black For Offices 20 20 62 Water Dipper, Big 50 50 63 Window Squeegee, Heavy Duty, With Long Handle 15 15 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Sjh-24-592-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Alcohol ,ethyl, 70% Isoprophyl , Gallon 2 Battery Charger ,aa, 4's 3 Battery, Rechargeable, Aa, 4s 4 Bleaching Solution, 1 Gal, Original / Lemon 5 Bleaching Solution, Colorsafe, 3600ml 6 Boots, Size 9 7 Boots, Size10 8 Broom, Soft, Thick 9 Bulb Capsule, 15w, Led Type 10 Bulb, Led, 9w 11 Chlorine Granules, 40 Kg,container 12 Clothes Pin, 1kg 13 Cockroach Killer Spray 14 Curtain, Thick, Blue, Abstract Design With Ring Holes, 7ft Length (one Design Only) 15 Detergent Powder, 2 Kg 16 Detergent Powder, 1 Kg 17 Dishwashing Liquid, 1 Gallon, Antibac 18 Disinfectant , Floor Tile Cleaner, 1gal, Antibac, Lemon/orange Scent 19 Disinfectant, Sodium Hypochlorite Solution, 10% Purity, 1 Gal 20 Door Mat, Cloth, Cotton 21 Dust Pan, Big 22 Electrical Tape, 16m 23 Fabric Conditioner, Gal 24 Feather Duster, 25 Floor Brush With Long Handle, Heavy Duty 26 Floor Matting L 5meters X W 1 Meter, Rubber, Coarse For Slippery Area, Gray 27 Garbage Bag Black, Medium 28 Garbage Bag Black, 37"x40" 29 Garbage Bag Green, 37"x40" 30 Garbage Bag Yellow, 37"x40" 31 Garden Hose,pvc, 1/2", High Quality 32 Glass Cleaner, Spray, 500 Ml 33 Hospital Bedsheet Set (1 Fitted, 1 Flat, 1 Pillowcase), Dark Green, 100% Cotton, L-80cm, W-25cm 34 Hospital Bedsheet Set (1 Fitted, 1 Flat, 1 Pillowcase), Mint Green, 100% Cotton, L-80cm, W-37cm 35 Industrial Gloves 36 Laundry Brush, Big 37 Laundry Gloves, Medium/large, Thick, Long 38 Liquid Hand Washing Soap, Gal 39 Mop,wooden Handle W/ Steel Mopholder, Heavy Duty, 100% Cotton 40 Mop Squeezer With Wringer, Heavy Duty 41 Mop, Long Dust Mop With Handle, 3layer, Flatbed 110cm Long, 100% Cotton, Heavy Duty 42 Pail, 24l Capacity 43 Paper Cup, 260cc 44 Paper Plate 45 Room Freshener Gel For Room 180 G, Assorted Scent 46 Sack, Thick, 50kg 47 Signage Board Stand (i.e Caution Wet Floor) 48 Scouring Sponge, Regular Size 49 Spray Bottle, Portable, Pressurize, 1l, Heavy Duty 50 Rag For Table, 100% Cotton 51 Tissue Paper, 2 Ply, Pull-up, Compatible To Tissue Dispenser 52 Tissue Dispenser Compatible To Tissue Paper 53 Toilet Bowl Brush W/ Continuous Handle 54 Toilet Bowl Cleaner, 900ml 55 Toilet Deodorant Cake, 100gms 56 Toilet Signage, Male, Green Background 57 Toilet Signage, Female, Green Background 58 Toilet Signage, Pwd, Senior Citizen, Pregnant Women , Green Background 59 Toilet Pump/plunger 60 Uv Germicidal Light Disinfection Lamp 61 Waste Bin, Pedal Type 50l Capacity, Color Black For Offices 62 Water Dipper, Big 63 Window Squeegee, Heavy Duty, With Long Handle Condition: 1. Partial Delivery Is Not Allowed ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.
Closing Date4 Dec 2024
Tender AmountPHP 1.5 Million (USD 25.7 K)

Caraga Regional Hospital Tender

Healthcare and Medicine
Philippines
Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo ----------------------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-12-11 (97) Supply And Delivery Of Laboratory Reagents For Clinical Microscopy, Hematology, Coagulation & Point Of Care Under Single-year Framework Agreement (early Procurement Activity) Abc: ₱ 15,676,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy 2025 General Appropriation Act (gaa) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Fifteen Million Six Hundred Seventy Six Thousand Pesos Only ( Php 15,676,000.00 ) Under The Contract For The Supply And Delivery Of Laboratory Reagents For Clinical Microscopy, Hematology, Coagulation & Point Of Care Under Single-year Framework Agreement (early Procurement Activity)). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding. This Is A Lot Bid. Line Item Code Description Quantity Unit Of Measure Unit Cost Total Cost 1 Lot 5 Clinical Microscopy 1 Lot Reagents For Fully Automated Complete Urine Analysis 35000 Test 100.00 3,500,000.00 Subtotal Lot 5 ₱ 3,500,000.00 2 Lot 6 Hematology - Cbc 1 Lot Complete Blood Count Set Of Reagents Inclusive Of Tri-level Controls 50000 Test 120.00 6,000,000.00 Subtotal Lot 6 ₱ 6,000,000.00 3 Lot 7 Coagulation 1 Lot Activated Partial Thrombin Time (aptt) Test 10000 Test 250.00 2,500,000.00 Prothrombin Time (pt) Test 12000 Test 250.00 3,000,000.00 Subtotal Lot 7 ₱ 5,500,000.00 4 Lot 8b Point Of Care (i-stat) 1 Lot Cartridge Capable Of Arterial Blood Gas With Electrolytes (25 Test/box) Compatible To Istat 20 Box 26,000.00 520,000.00 Cartridge Capable Of Coagulation (protime) Test (25 Test/box) Compatible To Istat 6 Box 26,000.00 156,000.00 Subtotal Lot 8b ₱ 676,000.00 Grand Total ₱ 15,676,000.00 Technical Specification And Terms Of Reference Lot 5 – Clinical Microscopy Item Description The Winning Bidder Shall Provide The Following • Complete Set Of Reagents For Urinalysis For 35,000 Tests • Compatible To Existing And Owned Machine Dirui Fus2000 1. Includes Reagent Strips, Sheath, Daily Controls For Sediments And Chemistry, Calibrators, Focus, Detergent, Standards Solution, And Other Reagents Necessary For Testing. 2. Free Use Of A Backup Machine Which Uses Same Reagents And Is Responsible For The Preventive Maintenance Of Their Own Machine. 3. Bidder Must Provide The Following For Free: • Lugols Iodine 200ml • Glass Slide - 40boxes (72pcs/box) • 35,000 Disposable Test Tubes Compatible To Machine • 45,000 Pieces Of Disposable Screw Cap Urine Container • 5 Boxes Applicator Sticks (plain, Non-sterile, Disposable Wooden Applicator Sticks With Uniform Cylindrical Shape And Smooth Finish) 1000pcs/box • 1 Set Of Katokatz Reagent At Least 200ml. (glycerin And Malachite Green) 4. Lis Connectivity Ready; Machine Must Be Connected To Caraga Regional Hospital Laboratory Information System Upon Installation. Supplier Will Shoulder Any Connectivity Costs. Lis Must Be Installed In The Machine/equipment Within 7 Working Days From The Delivery Of The Machine. Terms Of Delivery 50% Of Reagents, Supplies And Consumables To Be Delivered Within 7 Working Days From The Receipt Of The Notice To Proceed. The Remaining 50% Will Be Delivered Within 7 Working Days From Request/demand By The End User. Note: In Case Of None Delivery Of Reagents (and Trouble Of The Machine) But With Received P.o The Supplier Will Shoulder The Payments For Send-out Examinations. The Winning Supplier Must Present A Moa With Referring Laboratory For This Purpose. Lot 6 – Hematology Item Specification: 1. Reagents Must Be Compatible With The Sysmex Xn1000 Machine. This Includes: A. Diluent And Sheath Flow Agent (cell Pack) (20l/box) - 168 Boxes B. Non-cyanide Hemoglobin Reagent (sulfolyzer) (5l/box) - 24 Boxes C. Fluorescent Dye For Nrbc (lysercell Wnr) (5l/box) - 36 Boxes D. Lysing Solution For Wbc Differential Count (lysercell Wdf) (5l/box) - 24 Boxes E. Fluorescent Dye For Nrbc (fluorocell Wnr) (82ml X 2/box) - 12 Boxes F. Fluorescent Dye For Wbc (fluorocell Wdf) (42ml X 2/box) - 10 Boxes G. Diluent For Retic (cell Pack Dfl) (1l) - 6 Bots H. Fluorescent Dye For Retic (fluorocell Retic) (12ml X 2/pack) - 3 Pack Terms Of Reference 1. The Winning Supplier Must Provide The Following For Free Of Charge A. A Back-up Of Fully Automated Hematology Analyzer With License To Analyze Reticulocyte Count And Body Fluids Using The Same Reagent To Ensure Continuous Operation Despite Repairs Or Preventive Maintenance. Lis Connectivity Ready; Machine Must Be Connected To Caraga Regional Hospital Laboratory Information System Upon Installation. Supplier Will Shoulder Any Connectivity Costs. Lis Must Be Installed In The Machine/equipment Within 7 Working Days From The Delivery Of The Machine. B. 500 Trays Of 2 Ml Edta Test Tubes And 200 Trays Of 0.5 Ml Edta Microtainer Tubes. C. Tri-level Control (l, N, H) - At Least 2 Sets Per Month And As Needed D. Calibrator E. Washing Solution (120ml) - At Least 2 Bottles Per Month And As Needed 2. Material Safety Data Sheet 3. The Winning Supplier Is In Charge Of The Machine's Preventive Maintenance, Which Must Be Performed Twice A Month And As Needed. In The Event Of A Breakdown, The Machine Must Be Repaired Within Two Days Of The Reported Downtime Or May Provide A Backup Machine. If There Is A Major Cause For The Breakdown Or Parts Replacement, The Purchase Of Any New Parts Must Be Coordinated With Biomed For Approval. 4. Must Perform Machine Calibration And Will Provide Certificate Of Calibration And Traceability Every 6 Months. 5. Supplier Must Respond Within 3 Days To The Needs Of The End User Particularly On The Reagent For Continuous Operation Of The Laboratory Services. Terms Of Delivery • The Expiry Dates Of Reagents To Be Delivered Must At Least Be 2 Years From The Date Of Delivery As Specified In The Acceptance Report. • 50% Of Reagents, Supplies And Consumables To Be Delivered Within 7 Working Days From The Receipt Of The Notice To Proceed. The Remaining 50% Will Be Delivered Within 7 Working Days From Request/demand By The End User. Note: In Case Of None Delivery Of Reagents (and Trouble Of The Machine) But With Received P.o The Supplier Will Shoulder The Payments For Send-out Examinations. The Winning Supplier Must Present A Moa With Referring Laboratory For This Purpose. Lot 7 – Coagulation Technical Specification 1. Fully Automated, Brand-new Machine Capable Performing Examinations For Both Prothrombin Time (pt), Activated Partial Thromboplastin Time (aptt) With The Following Features Free Of Use: A. Prothrombin Time And Activated Partial Thromboplastin Time (aptt) Reagent Is Of Human Source. B. Random Access For Stat Requests C. With Seconds, Percent, Inr And Isi Unit For Prothrombin Time D. Capable Of Processing Directly From Extraction Tube Without Manually Transferring Serum/plasma. E. Able To Run / Process Fibrinogen Test. F. Reagents Refrigerated On Board G. Sample Time Flagging H. Auto Sample Handling I. Assays Continues While Loading Reagents Or Any Consumables J. Barcode Reading Of Samples 2. The Analyzer Be Equipped With Programs For: A. Daily Worklist (printable) B. Reagent Inventory Management System C. Quality Control Chart (levy - Jenning's Graph) 3. A Back - Up Machine Using The Same Reagent To Ensure Continuous Operation Despite Repairs Or Preventive Maintenance. 4. Lis Connectivity Ready; Machine Must Be Connected To Caraga Regional Hospital Laboratory Information System Upon Installation. Supplier Will Shoulder Any Connectivity Costs. Lis Must Be Installed In The Machine/equipment Within 7 Working Days From The Delivery Of The Machine. Terms Of References 1. The Winning Bidder Shall Provide The Following Free Of Charge: A. Basic Daily Controls (normal And Pathologic), Calibrators, Cleaning Solutions, Cuvettes/ Rotors, Sample Cups, And Other Consumables. B. A 24-placer Centrifuge And Stop Watch Or Timer. C. Distilled Water If Required By The Process D. 180 Trays Of 2 Ml Evacuated 3.2% Citrated Tube (100pcs. /tray) And E. 40 Trays Of 1 Ml Blue Top Tubes (100pcs. /tray) Pre-measured With Sodium Citrate Designed For The Collection Of Pediatric Blood Samples. 2. Reagents Of At Least 18 Months Expiry From The Date Of Delivery. 3. Product Must Adhere To Iso 13485:2016 Standards For Medical Laboratories, Ensuring Quality And Competence In Laboratory Testing Procedures Or Its Equivalent. 4. Material Safety Data Sheet 5. Training On How To Properly Operate The Equipment And How To Optimize Results. 6. The Supplier Should Have A Certified Product Specialist And Qualified Technical Support To Ensure After-sales Service And Product Support. 7. Preventive Maintenance Must Be Done Every Month And As The Need Arises. Repairs And Other Services Including Parts Of The Machine Are Free. 8. Must Provide Work Procedure, Quick Guide And Operating Procedure Manual (soft And Hard Copy). 9. Must Provide Calibration Certificate And Perform Machine Calibration Every 6 Months. 10. Must Possess A Certificate Of Exclusive Distributorship Or Its Equivalent. 11. Must Have A Certificate Of Product Registration. Terms Of Delivery 50% Of Reagents, Supplies And Consumables To Be Delivered Within 7 Working Days From The Receipt Of The Notice To Proceed. The Remaining 50% Will Be Delivered Within 7 Working Days From Request/demand By The End User. Note: In Case Of None Delivery Of Reagents (and Trouble Of The Machine) But With Received P.o The Supplier Will Shoulder The Payments For Send-out Examinations. The Winning Supplier Must Present A Moa With Referring Laboratory For This Purpose. Lot 8b - Point Of Care (i-stat) Terms Of Delivery The 30% Of The Reagents, Supplies And Consumables Will Be Delivered 7 Working Days Upon Receipt Of The Notice To Proceed. The Remaining 50% Will Be Delivered As Per Request/demand By The End User. Other Terms Of Reference Terms Of Payment. Payment Shall Be Made Upon Complete Delivery. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. Post-qualification The Bidder Shall Comply The Post-qualification Requirements Set By The Procuring Entity Especially During Product Demonstration Or Requiring For A Product Sample On A Given Schedule. Failure To Comply Shall Be Ground For Post-disqualification. The Procuring Entity Shall Require The Bidder To Deliver A Product Sample Or Demo To Caraga Regional Hospital Vicinity, Or To Undergo A Site Visit To The Nearest Hospital. Additionally, The Procuring Entity May Have Preferences Regarding How This Hospital Can Find Reliable And Easily Accessible Procedures During The Post-qualification Phase. Consequently, During This Phase, The Bidder Must Always Be Ready To Comply With Any Requirements Or Standards Made By The Procuring Entity. This Procurement Is A Lot Bid. Validity Of The Contract Without Prejudice To The Provision Of Applicable Laws, Rules And Guidelines, The Contract Shall Be Automatically Terminated Under The Following Conditions: A. When The Total Quantity Specified In The Contract Has Been Exhausted; Or B. For Any Justifiable Reason Ground Where The Contract Will Not Redound To The Benefit Of The Government Or There Is Violation Of The Contract. Repeat Order: 1. No Repeat Order For An Item In Contract Being Awarded Shall Be Allowed Until After The Procuring Entity Has Exhausted The Estimated Quantity For The Same Item Specified Therein Or After The Contract Has Expired, Whichever Comes First, And Subject To The Conditions Provided In Section 51 Of Ra 9184 And Its Irr. For This Purpose, For This Purpose, The Repeat Order Shall Be Availed Of Only Within Six (6) Months From The Date Of The Last Final Call-off. 2. In Case Repeat Order Is Allowed And Resorted To, The Twenty-five (25%) Maximum Allowable Quantity Shall Be Based On The Total Quantity Of Awarded Item. General Conditions All Other Rules Governing Contract Implementation And Termination Under Ra 9184 And Its Irr, And Relevant Procurement Policies Shall Be Applicable. Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent (25%) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature, Which Shall Be Determined By The Bac. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 19, 2024 – December 11, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference November 29, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/88636391490?pwd=kw2zvribcugbsvxtt6qugrfbmwxjya.1 Meeting Id: 886 3639 1490 Passcode: 058855 Deadline Of Submission Of Bids December 11, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Opening Of Bids December 11, 2024 At 3:00 P.m. Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/87428491783?pwd=uj6m1ify3bouow37phq5zffaltfgaa.1 Meeting Id: 874 2849 1783 Passcode: 912134 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1oayhxbwoo8hs1ngv7kouk3kklki6bily?usp=sharing Amount Of Bidding Documents: ₱ 5,000.00 Lot 5 Clinical Microscopy ₱ 10,000.00 Lot 6 Hematology (cbc) ₱ 10,000.00 Lot 7 Coagulation ₱ 1,000.00 Lot 8b Point Of Care (i-stat) Bidders Who Wish To Participate In All Categories Will Be Required To Pay The Amount Of Php 25,000.00 Only It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before December 11, 2024 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 11, 2024 At 3:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore, Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com. 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee
Closing Date11 Dec 2024
Tender AmountPHP 15.6 Million (USD 265.9 K)

Poli Ka City Tender

Civil Works Others
Corrigendum : Closing Date Modified
Czech Republic
Details: The subject of the Public Contract is the construction modification (revitalization) of the public space on Náměstí B. Martinů and the space between Riegrova Street and the Church of St. Jakub V Polička. The above-mentioned modifications include the reconstruction of roads, sidewalks and other paved areas. In connection with the modifications of the areas, there will be newly reconstructed networks of technical infrastructure (water pipes, unified and storm sewers), which are technically viable. The Space Will Be Newly Equipped With Water Features, Vegetation And Greenery Elements That Will Be Adjusted And Appropriate Types Of Wood And Plants Will Be Newly Planted. These modifications will be related to the construction of a new retention tank for rainwater from the Church of St. Jakub And Installation Of An Automatic Irrigation System That Will Serve The Planted Greenery. The space will also be supplemented with new furniture. The construction is divided into the following objects: Io – Engineering Objects: • Io.01 Paved Areas • Io.02 Renewal of Water Supply System • Io.03 Renewal of Unified Sewerage • Io.04 Renewal of Rain Sewerage of Paved Areas • Io.05 Retention, Accumulation of Rainwater Church • Io.06 Water Features • Io.07 Public Lighting • Io.08 Overlay of Communication Line - Not Subject to This Contract. The transfer will be carried out by the owner of the communication line, Cetin As, Prague, through the contract concluded with the client. The Selected Supplier of this Procurement Procedure Must Suffer and Enable the Realization of the Transfer of Communication Management by this Company. Zo - Vegetation Arrangements: • Zo.01 Vegetation And Vegetation Measures The Subject of the Public Contract is Described in Detail in the Following Documentation: • Project Documentation for Construction Implementation Prepared by Design Office Ai5 Sro, Sokolovská 428/130, 186 00 Prague 8, Ičo: 25854372, Responsible Designer Mga. Přemysl Kokeš – Authorized Architect in Architecture A.1, No. Čka 03592 (Annex No. 5 of the Tender Documentation), • Designers of the Individual Parts of the Project Documentation Are Listed in the Accompanying Report on Page 4 (Annex No. 5 of the Tender Documentation), • Draft Contract for the Work (Annex No. 4 of the Tender Documentation), • Unassessed Statement of Area - Blind Budget (Annex No. 6 Tender Documentation), • Joint Construction Permit From 27.7.2022 With Clause Pm, ID: Mp/18603/2022/sú/k – Issued by the Building Office of the Polička Municipal Office ( annex No. 8 Tender Documentation), • Extension of the Joint Construction Permit Dated 3/5/2024 With Clause Pm, ID: Mp/14979/2024/sú/krl – Issued by the Building Office of the Polička Municipal Office (annex No. 8 Tender Documentation ), • Binding Opinion of the Department of State Monument Care of Měú Litomyšl Dated 20/05/2022, ID: Měú Litomyšl 028524/2022 (Annex No. 8 Tender Documentation), • Binding Opinion of the Regional Hygiene Station of the Pardubice Region Dated 15/06/2022, ID: Khspa 07219/2022/hok-sy (Annex No. 8 of the Tender Documentation).
Closing Date11 Dec 2024
Tender AmountRefer Documents 

Adela Serra Ty Memorial Medical Center Tender

Healthcare and Medicine
Philippines
Details: Description Invitation To Bid For Procurement Of Medical Supplies –package 1 (early Procurement Activity) (epa) Ib No. 2024-11-26 (67) 1. The [adela Serra Ty Memorial Medical Center], Using A Single-year Framework Agreement, Through The [astmmc Fund] Intends To Apply The Sum Of Thirty-eight Million Three Hundred Thousand Six Hundred Ninety Pesos Only [38,300,690.00] Being The Abc To Payments Under The Contract For Each Item For The Procurement Of Medical Supplies – Package 1 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (67). Bids Received In Excess Of The Total Cost Per Item Shall Be Automatically Rejected. 2. The [astmmc] Now Invites Bids For [procurement Of Medical Supplies – Package 1 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (67)]. Delivery Of The Goods Is Required Within [10-15 Calendar Days] [after Issuance Of A Call-off]. Bidders Should Have Completed, Within [five Years] From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From [adela Serra Ty Memorial Medical Center] And Inspect The Bidding Documents At The Address Given Below During [8:00am To 12:00; 1:00 To 5:00pm, Monday Thru Friday]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [november 4 To 26, 2024] From The Given Address Below, Philgeps Website And Probac Facebook Page And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos Only [25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In The Manner Whether It Will Be Presented In Person Or Through Electronic Means. 6. The [astmmc] Will Hold A Pre-bid Conference On [november 12, 2024] At [09:30am, Bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds]and/or Through Video Conferencing Or Webcasting Via [meet.google.com/rbu-snjw-vga].}, Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before [november 26, 2024 At 09:00am]. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On [november 26, 2024 At 09:01am] At The Given Address Below And/or Via [meet.google.com/rbu-snjw-vga]. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The [astmmc] Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: [dr. Dominador B. Toral] [bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds] [astmmcprocurement@gmail.com] [tel. No. 086-211-4306] Probac Facebook Page Https://www.facebook.com/astmmc.probac] 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps And Probac Facebook Page] 1 Abdominal Pack ,28x24 Mesh With Xray Liner,with 12" Loop 12"x12"x12 Ply Sterile (lap Sponge) 5000 Pc 225,000.00 2 Abdominal Suction Tubing Sterile Half Curved With Removable Handle, Vacuum Thumb Control, Crown Rip, Tube Length 12ft /suction Connecting Tube With Yankauer Handle Size 3/16", 2m, Sterile 5000 Pc 475,000.00 3 Absorbable Haemostatic Gelatin Sponge Non-woven Material Sterile (oxidized Regenarated Cellulose) 70x50x10mm 100 Pc 43,000.00 4 Airway (mouth Guard) No. 0,size-60mm, Sterile 40 Pc 1,440.00 5 Airway (mouth Guard) No. 00,size-50mm, Sterile 40 Pc 1,440.00 6 Airway (mouth Guard) No. 1,size-70mm, Sterile,white 200 Pc 7,200.00 7 Airway (mouth Guard) No. 2,size-80mm, Steile, Green 750 Pc 27,000.00 8 Airway (mouth Guard) No. 3,size-90mm, Sterile, Yellow 400 Pc 14,400.00 9 Airway (mouth Guard) No. 4,size-100mm, Sterile, Red 350 Pc 12,600.00 10 Airway (mouth Guard) No. 5,size-110mm,sterile, Blue 350 36 12,600.00 11 Anesthesia Breathing Circuit, 72" Expandable Tubing, Single Limb Circuit With Hch Filter And 3l Latex-free Airbag, Adult 200 Pc 170,000.00 12 Anesthesia Breathing Circuit,jackson Reese T-piece Breathing System With 0.5ml Open Tail Bag, 1.8m Length 20 Pc 17,000.00 13 Adhesive Paper Tape 1 Inch/non Woven Tape,12's 250 Box 52,500.00 14 Asepto Syringe 50cc, Sterile, Plastic With Long Tip 4000 Pc 120,000.00 15 Autoclave Tape(steam Indicator)1 Inch X50cm 400 Roll 86,000.00 16 Alcohol Swab/prep Pads With 70% Isopropyl Alcohol,200's 1000 Box 112,000.00 17 Alkytriamine Cationic Surfactant 25ml: 1liter Water Dilution High Level Disinfectant Sporicidal Solution/sterilant 1-5minutes (for Devices And Instruments) 70 Gal 1,400,000.00 18 Enzymatic Pre-soaking Solution With Disinfectant Pre-cleaner With Disinfectant 5ml: 1 Liter Water Dilution 10 Gal 200,000.00 19 Alkytriamine Cationic Surfactant 50ml: 1liter Water Dilution High Level Disinfectant Sporicidal Solution/sterilant For Large And Small Surfaces. (wall To Wall) 30 Gal 234,000.00 20 Armsling Large/adult 650 Pc 33,800.00 21 Bedpan, Plastic 2000 Pc 144,000.00 22 Bp Cuff Arm Cloth, Adult 250 Pc 43,250.00 23 Bonewax 2.5g, 12's 3 Box 10,080.00 24 Calibrated Glass, 210ml 1000 Pc 22,000.00 25 Cautery Pad Adult Compatible With The Existing Cautery Machine, With Cable 200 Pc 116,000.00 26 Cautery Cord W/ Tip Pencil, Sterile, Non Stick Tip 2500 Pc 300,000.00 27 Central Venous Catheter Double Lumen, 7fx12"(30cm) 20 Pc 92,000.00 28 Central Venous Catheter Triple Lumen, 7fx12"(30cm) 10 Pc 51,000.00 29 Cervical Collar, Large 100 Pc 33,000.00 30 Colostomy Bag, Adult (one-sided Comfort Panel And Tape Collar Pouch) With Individually Clip(provide Sample Atleast 2 Pcs) 600 Pc 180,000.00 31 Colostomy Bag, Pedia (one-sided Comfort Panel And Tape Collar Pouch) With Individually Clip(provide Sample Atleast 2 Pcs) 100 Pc 30,000.00 32 Cotton Applicator Tipped Stick, Sterile, 100's 250 Box 25,000.00 33 Ctg Paper (comptible To Eden And Sunray Machine)3pads/box 50 Box 65,000.00 34 Ctg Paper, 152mm X 90mm, 150p (compatible To Edan Machine) (themo) (provide At Least 1 Sample) 100 Pad 43,200.00 35 Chlorhexidine Acetate With Tulle Gras Dressing 10cm X 10cm 500 Pc 47,000.00 36 Disposable Gown Non-sterile,non Woven,water Resistant,soft,good Tensile Strength,10's 5000 Pack 1,625,000.00 37 Disposable Chest Drainage Bottle, 1600ml 300 Pc 180,000.00 38 Disposable Needle G-19, Needle Length 1",100's 350 Box 63,000.00 39 Disposable Needle G-26x1/2", 100's 30 Box 5,400.00 40 Disposable Syringe, W/ Needle 1cc Insulin, G-30x8mm,luer Lock,100's 350 Box 92,050.00 41 Disposable Syringe, W/ Needle 1cc,tuberculin,0.5x16mm,luer Lock, 100's 2000 Box 480,000.00 42 Disposable Syringe W/ Needle 3cc,g-23,needle Length 1",luer Lock, 100's 4000 Box 800,000.00 43 Disposable Syringe W/ Needle 5cc,g-23, Needle Length 1"luer Lock, 100's 3000 Box 600,000.00 44 Disposable Syringe W/ Needle 10cc,g-23, Needle Length 1", Luer Lock, 100's 4000 Box 920,000.00 45 Disposable Syringe W/ Needle 20cc, Luer Lock, 50's 600 Box 180,000.00 46 Disposable Syringe Without Needle 30cc, Luer Lock, 50's 600 Box 374,400.00 47 Disposable Syringe Without Needle 50cc, Luer Lock, 25's 1340 Box 723,600.00 48 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Adult,50's (provide Sample Atleast 5 Pcs) 1200 Pack 288,000.00 49 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Pedia,50's (provide Sample Atleast 5 Pcs) 100 Pack 24,000.00 50 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Neonate,50's (provide Sample Atleast 5 Pcs) 50 Pack 19,200.00 51 Disposable Razor 1700 Pc 25,500.00 52 Disposable Shoe Cover, 100's 700 Pack 140,000.00 53 Ecg Paper 80mm X 20mm 800 Roll 80,000.00 54 Endotracheal Tube Fr. 2.0,uncuffed, 10's 30 Box 9,300.00 55 Endotracheal Tube Fr. 2.5, Uncuffed,10's 30 Box 9,300.00 56 Endotracheal Tube Fr. 3.5, Uncuffed,10's 25 Box 7,750.00 57 Endotracheal Tube Fr. 4.0,uncuffed,10's 25 Box 7,750.00 58 Endotracheal Tube Fr. 6.5,cuffed,10's 30 Box 10,800.00 59 Endotracheal Tube Fr. 7.0,cuffed,10's 50 Box 18,000.00 60 Endotracheal Tube Fr. 7.5,cuffed,10's 160 Box 57,600.00 61 Endotracheal Tube Fr. 8.0,cuffed,10's 30 Box 10,800.00 62 Elastic Bandage 4"x 5y 7500 Roll 150,000.00 63 Elastic Bandage 6"x 5y 7300 Roll 219,000.00 64 Epidural Set/ Epidural Kit, G-18;15mm Spinal Needle Tip Protusion From Tuohy Needle;in Locked Position The Spinal Needle Is Free To Rotate,enabling 360 Degree Freedom For Drug Dispersal In Preferred Direction;excellent Drug Distribution Is Achieved Through Three Helically-located Lateral Eyes Within The Clear Catheter,minimising The Potential For The Localised Pooling Of Drug Solutions Within The Epidural Space;pencil Point Needles Are Designed To Reduce The Risk Of Post Dural Puncture Headache And Atraumatic Entry Into The Subarachnoid Space. (provide Sample 1pc) 200 Pc 642,000.00 65 Extension Tube With Needle Free Valve, Triple Lumen, 10-15cm (bring At Least 1 Sample) 1500 Pc 300,000.00 66 Face Mask, Disposable, Surgical, Medical Grade,earloop,non-woven, 3ply, 50's 8000 Box 800,000.00 67 Foley Bag Cath. 2 Way-silicone Coated Fr. 16, Needleless 5000 Pc 200,000.00 68 Gauze Swab, 4"x4"-8 Ply, 28x24 Mesh, Non-sterile,100's/pack 12000 Pack 1,920,000.00 69 Gauze Swab 40's, 28x24 Mesh, 2"x2"x8 Ply Unsterile,100's 1000 Pack 150,000.00 70 Gauze Sponge,28x24 Mesh,with X-ray Liner,4"x8"x16 Ply, Sterile, 10's (pre-cut) Folded 5000 Pack 470,000.00 71 Gauze Roll, Surgical, With X-ray Liner 36"x100y (fine Mesh, 2 Ply) 28x24 Mesh 35 Roll 35,000.00 72 Gigli Saw (individually Wrapped) 100 Pc 60,000.00 73 Hernia Mesh 7.6cmx15cm (monofilament Knitted, Polypropylene Tissue Reconstruction Prosthesis/standard Hernia Kit 7.5 Cm X 15 Cm, Rectangle, Soft Polypropylene Mesh, Oxidized Regenerated Cellulose (orc) Knitted Fabric, (polydioxanone) Suture Polymer Film 100 Pc 345,000.00 74 Humidifier Sterile Water, 340 Ml 1000 Bottle 200,000.00 75 Ice Bag 6" 400 Pc 40,000.00 76 Internal Jugular Catheter, Double Lumen, Hemodialysis Kit (provide Sample Atleast 1 Pc) 120 Pc 720,000.00 77 Iv Flow Regulator With Pediatric Set (60 Drops/ml)(provide Sample Atleast 2 Pcs) 800 Pc 464,000.00 78 Iv Flow Regulator With Adult Set (30 Drops/ml) (provide Sample Atleast 2 Pcs) 1000 Pc 580,000.00 79 Laparotomy Pack, Sterile (5pcs Surgical Gowns, 5pcs Hand Towels, 1 Laparotomy Drape With Fenestration, 4pcs Square Off Drape With Adhesive, 1pc Mayo Cover, 1pc Suture Bag, 1pc Back Table Cover) 100 Pack 330,000.00 80 Lubricating Jelly, 150 Grams 800 Tube 120,000.00 81 Lubricating Jelly, 5 Grams 5000 Sachet 35,000.00 82 Nasal Oxygen Cannula, Adult 10000 Pc 200,000.00 83 Nasal Oxygen Cannula, Neonate 400 Pc 8,000.00 84 Nasal Oxygen Cannula, Pedia 2000 Pc 36,000.00 85 Nebulizer With Tee,7ft Tubing And Mouthpice, 6ml 10000 Pc 480,000.00 86 Nasogastric Tube Fr. 5 With Radiopaque Line; No Cover, Fits 100cc Asepto Syringe; Silicon 300 Pc 4,500.00 87 Nasogastric Tube Fr. 8 With Radiopaque Line; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 105cm 500 Pc 7,500.00 88 Nasogastric Tube Fr. 14 With Radiopaque Line, 105cm; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 105cm 800 Pc 30,400.00 89 Nasogastric Tube Fr. 16 With Radiopaque Line, 125cm; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 125cm 2000 Pc 76,000.00 90 Non-rebreather Oxygen Mask, Adult,with Non-kink Oxygen Tubing, Oxygen Reservoir Bag 300 Pc 18,000.00 91 Oxygen Mask With Tubing, Adult 5000 Pc 200,000.00 92 Oxygen Mask With Tubing Infant 600 Pc 24,000.00 93 Oxygen Mask With Tubing Pedia 1000 Pc 40,000.00 94 Patiend Id Band, Adult, (white),100's 400 Box 120,000.00 95 Patiend Id Band, Pedia, (blue),100's 100 Box 30,000.00 96 Patiend Id Band, Pedia, (pink),100's 100 Box 30,000.00 97 Pvc Manual Resuscitator Set, Adult, Individually Boxed 2000 Set 3,000,000.00 98 Pvc Manual Resuscitator Set, Pedia, Individually Boxed 500 Set 300,000.00 99 Pvc Manual Resuscitator Set, Neonate, Individually Boxed 300 Set 180,000.00 100 Penrose Drainage Tubing 1/4"x18",sterile 100 Pc 2,400.00 101 Povidone 10% Solution 500 Gal 650,000.00 102 Povidone 7.5 % Cleanser 200 Gal 252,000.00 103 Plaster Of Paris, Fast Setting With Gypsum Powder And Leno Gauze 6 Inches X 5 Yards 1500 Roll 255,000.00 104 Surgical Plaster Creamy White Color, 3",2",1" And 1/2"(provide Sample At Least 2 Roll) 1300 Tube 4,030,000.00 105 Sodalime (soda Sorb),38 Lbs (1724kgs) 25 Pail 212,500.00 106 Spinal Needle Size: 0,53 X 88mm / 25g X 3 1/2", Sterile 4000 Pc 800,000.00 107 Suction Cath. Fr. 5 With Thumb Control Valve, 50-60cm Length 1400 Pc 22,400.00 108 Suction Cath. Fr. 8 With Thumb Control Valve, 50-60cm Length 3000 Pc 48,000.00 109 Suction Cath. Fr. 14 With Thumb Control Valve, 50-60cm Length 3500 Pc 56,000.00 110 Suction Cath. Fr. 16 With Thumb Control Valve, 50-60cm Length 6500 Pc 104,000.00 111 Surgical Blade # 10, Sterile,100's 40 Box 16,800.00 112 Surgical Blade # 11, Sterile,100's 30 Box 11,160.00 113 Surgical Blade # 20, Sterile,100's 40 Box 16,800.00 114 Surgical Cap,non Woven Buoffant, Blue, Double Elastic, 24", 100's 1200 Pack 196,800.00 115 Skin Stapler, Clear Cartridge With Centerline Pointer And Visual Access 35 W 2000 Pc 600,000.00 116 Surgical Scrub Brush Impregnated With Chlorhexidine Gluconate, Soft Sponge And Bristles, Individually Packed With Dispenser, 30's 600 Box 1,209,600.00 117 Sterilization Reel 10 Cm X 100 Cm (4"), Steam Sterilization 15 Roll 23,100.00 118 Sterilization Reel 30mm X 100m (12"), Steam Sterilization 15 Roll 104,400.00 119 Surgical Stapler Remover, 10's 10 Box 10,000.00 120 Thoracostomy (ctt) Tube Fr. 32/thoracic Drainage Catheter 80 Pc 8,960.00 121 Thoracostomy (ctt) Tube Fr. 36/thoracic Drainage Catheter 80 Pc 8,960.00 122 Tracheostomy Set Tube Cuffed With Inner Cannula, Size 7.0 10 Pc 35,100.00 123 Umbilical Cord Clamp Thick With Shaft Safety Security Lock, With Tight Teeth-maintain Tight Seal, Applies Consistent Constant Pressure On Any Size Cord As Cord Shrinks. (provide Sample Atleast 5 Pcs) 5300 Pc 63,600.00 124 Urine Bag (urobag), Adult, Capacity 2000ml,push Pull Valve, With Hook, Sterile (provide Sample Atleast 5 Pcs) 5500 Pc 137,500.00 125 Ultra Transmission Gel, 280ml 100 Tube 20,000.00 126 Underpads Super Absorbable ,23" X 36",25's 650 Pack 406,250.00 127 Urine Collector, Pedia, Capacity 100ml 5000 Pc 75,000.00 128 Urine/stool Cup Plastic,transparent, Sterile, Individually Packed,40ml 100000 Pc 2,000,000.00 129 Urinal Plastic, Male, 1000ml 2300 Pc 115,000.00 130 Vascular Catheter, Permanent Hemodialysis Catheter Splint Type-fr. 14.5f X 24cm With Stylet 70 Pc 1,869,000.00 131 Wadding Sheet 6x5y 2000 Roll 136,000.00 132 Wooden Tongue Depressor, Sterile 100's 150 Box 24,000.00 133 Wound Drainage /closed Wound Drainage System Bulb Type, 125ml Reservoir, 7mm Drain & 3/16" Trocar,sterile 400 Pc 952,000.00 134 Wound Dressing, 9cmx25cm 300 Pc 60,000.00 135 3-way Stop Cock 300 Pc 6,000.00
Closing Soon26 Nov 2024
Tender AmountPHP 38.3 Million (USD 657.5 K)
2411-2420 of 2428 active Tenders