Wood Tenders

Description: Supply And Installation Of 2d Safety Slogan Poster, Size: 24x 32 Inch (including 1 Inch Printed Wooden Coloure Border) On 5mm Thick Sun Board, With Vinyl Film And 06 Nos. Eyelet On Each Board As Per Annexure-1 &2

Description: CATEGORY: Sunboard with print and frame for motivation size 2.5 ft into 3.5 ft , PA System with accessories 2000 Watt 01 Amplifier comma 300 watt 4 speaker comma 800 watt 1 woofer and 2 wireless microphone , ASC Badge with light 2ft into 2ft , Flex print with frame for 8 Comp pl front and back size 20ft into 2ft , Glow sign acrylic board with print size 3.5 ft into 4ft , Console table size 4ft into 1.5 ft , Wooden Cabinet corner

Description: Wooden Scrap Auction Qty-87885 Kg

Description: CATEGORY: Chair visitor , Executive Table with side table for officer , Bookcase rubber wood , Revolving Chair for officer , Sofa set 06 Seater , Drugget , Confrence Table 04 Seater , Chair Revolving for clerk , Table cloth green , Centre table Rubber wood

Description: CATEGORY: Wooden Book Case (Q3) , Counter Chair (Bar / Pub) (Q3) , Heavy Duty Storage Racks (Q3)

Description: CATEGORY: Appointment Board (Wooden)

Description: CATEGORY: Wooden Handicrafts (Q3)

Description: 1- Teak Wood Flat D Shaped/j-type Moulding Size 75 Mm Width X 8 Mm Thickness X 7 Feet Length 2- Brass Door Latch Width 70 Mm (+/-5mm) And Length 45 Mm (+/-5mm) Design As Per Image

Description: CATEGORY: Crowbar 29mm dia , Chisel Carpenter 0.5Inch , Spade 1.4Kgs , Hammer 4.5 Kgs , Hammer 02 Kgs , Hammer 01 Kgs , Hammer 3.5Kgs , Hammer Ball pane 2Lbs , Hammer Ball pane 1Lbs , Hammer Ball pane 0.5inch , Hacksaw Frame 12Inch , Mason Square 18inch x 9inch , Pan Mortar 18inch dia , Hacksaw Blade 0.5inch x12inch , Tape metallic 30Mtr , Measuring tape Metallic 5Mtr , Tape Steel 30mtr , Tape Steel 15Mtr , Shovels 1.6 Kgs , Mason Trovel 150mm , Stone Carboran drun , Gurumala steel 10inch , Tape metallic 15mm , Weighing Machine 30 Kg Cap , Plumb Bob 225 Gram , Handle Wooden for Pic Axel , Pad Lock

Details: Description Procurement Of Science And Mathematics Equipment Packages To Public Elementary Schools For Grades 1 To 3 & Grades 4 To 6, Public Junior High Schools For Grades 7 To 10, And Public Senior High School For Grades 11 To 12 (core & Stem) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 541,190.66 Being The Abc To Payments Under The Contract For Procurement Of Science And Mathematics Equipment Packages To Public Elementary Schools For Grades 1 To 3 & Grades 4 To 6, Public Junior High Schools For Grades 7 To 10, And Public Senior High School For Grades 11 To 12 (core & Stem) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On March 04, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before March 17, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On March 17, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: General Specification: 1. Must Be Branded 2. Must Be Free From Toxic Materials 3. Must Be Properly Packed 4. Must Be Accompanied By A User’s Manual Written In English With Correct Grammar, Spelling And Punctuation Marks 5. “imported Products Should Pass International Quality Control Product Markings Such As Asqc, Afciq, Asq, Dgq, Eoqc, Iqa, Ce, Iso, Astm, And The Likes, While Locally Made Products (philippine-made) Should Pass The Local Quality Control Product Standards And Bear The Ps Mark.” Beaker, 500 Ml Increments: 10ml, Polyprolene Plastic, Height 12 Cm, Diameter: 8cm, Must Have A Container. 12 Pc Dry Cell, 9 Volts 21 Pc Miniature Guitar, Mini Acoustic Type, Half Size Guitar, Any Color, Surface Finish: Varnish, Made Of Good Quality Wood Without Sign Of Warp, Minimum Dimensions: Over All Length: 33 Inches, Width: 12 Inches, Depth: 3 ½ Inches, Standard Guitar Strings (no. 1-6), 18 Fret Minimum 10 Pc Set Of Tools Set Of Tools: Ball Pen Hammer, Handle Length Is 11”. 350g Approx. Weight, 1 Pc/set, Should Be Able To Peen Dent Surfaces In Metals 16 Set Set Of Tools: Long Nose Pliers, With Side Cutter, 6” Inches Long, Chrome Vanadium Material, 1 Pair/set Set Of Tools: Mechanical Wire Cutter And Pliers, 6.5” Inches, Chrome Vanadium Material, Should Be Able To Bend Large Wires, 1 Pair/set Set Of Tools: Precision Screwdrivers Set, 6 Pcs/set ( 3 Phillips, 3 Flats), With Plastic Casing, 1set/set Set Of Tools: Screwdriver, Flat, 3/16 Inches Tip Width X 6 Inches Long, Chromes Vanadium Material, 1 Pc/ Set Set Of Tools: Screwdriver, Phillips, Point Size Blade #3 X 6” Long, Chrome Vanadium Material, 1 Pc/set Set Of Tools: Soldering Iron, 60 Watts, Small Type, Wooden Handle, 1 Pc/set, Should Be Able To Heat Electrical Contacts For Permanent Joints Set Of Tools: Soldering Lead, Ǿ 1 Mm, Grade 60/40, Weight: 1 Lb./spool, 1 Spool/set Set Of Tools: Soldering Paste, All Purpose Flux, Non Corrosive, 50 Grams/can, 1 Can/set Set Of Tools: Tweezers, Stainless Steel, With Curved Tips, 6.5” Long, 1 Pair Set, Should Be Able To Hold And Pick Ti Y Electronics Components. Beaker, Borosilicate, 1000ml, Griffin Type, Transparent, Bubble Free Glass, Shape: A Cylindrical Container With Flat Bottom, Thickness Range: 1.5mm To 2.0mm, Permanent With Graduations, With Whiteenamel Marking Spot, Features An Easy-pour Spout, Capacity: 1000ml, + 10% Enameled Onto The Glass, Single Graduated Metric Scale, Graduation Starts St 200 Ml In 100ml Increments, Height Range: 140ml To 160mm, Outside Diameter: 100mm To 110 Mm, There Must Be No Cracks And Sharp Parts, Safely Packed In A Compartmentalized Box. 12 Pc Glass Cover Slips, 100’s/box, Pre-cleaned Cover Glasses And Not Sticking From Each Other, Material: Transparent Glass, Dimension: 22mm X 22 Mm Square, Thickness: 0.13 Mm – 0.17 Mm, There Shall Be No Chipped Edges, Safely Packed In A Plastic Box 10 Box Glass Slides, 72’sclear, Flat Glass, Free From Moisture, Dirt And Film, No Color, No Frost And No Chipped Edges, Dimension: 75mm (+ 1mm) X 25 Mm (+ 1mm), Thickness: 1.1 Mm (+ 0.1mm), No Sharp Edges And Pointed Corners, Packed In A Box Containing 72 Slides With Thin Paper Sheets In Between Them 10 Box Protractor, Student Type, Plastic, Transparent, Semi-circular, 180˚, Ǿ 150mm (or 75mm Radius), 1mm Thick (minimum), Angular Graduations Are In Degrees, From 0˚ To 180˚. With 2 Sets Of Numerals, One Reading Clockwise And Other Reading Counter Clockwise, Linear Graduations Are In Milimeters, From 0 To 100mm, With A Hole At Vertex Point Enough For A Fine String To Pass Through It, Plastic Surface Finish: Smooth, Clear And Free From Scratches, It Must Be Horizontally Level When Laid Flat On A Table- No Warping, Comes With A Plastic Case 10 Pc Ruler, Plastic, 12 Inches/ 30cm, Transparent, Smooth Surface, And 1 Mm Thick (minimum), Approximate Width X Length: 28mm X 314mm, Graduation: Metric Graduations On One Side While English Graduations On The Other Side: Metric Graduations Are In Centimeters, From 0 Cm To 30 Cm, With Every Cm Subdivided By 10. English Graduations Are In Inches, From 0 Inches To 12 Inches With Every Inch Subdivided By 16. Clear, Readable Black, Non-groove Permanent Prints ( Will Not Fade And Canot Be Scratched Off), Bendable Up To U-shape When Held At Both Ends And Item Shall Be Free From Toxic Materials. 10 Pc Beaker, 100ml, Type: Griffin, Low Form, Shape: Cylindrical Container With Straight Sides, A Flat Bottom And With Small Spout (or “beak”) To Aid In Pouring, Material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter: 50mm-52mm, Height: 70mm-72mm, Thickness: 1.5mm-2.0mm, Capacity: 100ml + 5% Etched Onto The Glass, Graduation Starts At: 20ml To 180ml, With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions, With Large White Marking Spot, Fwatures An Easy-pour Spout, With Single Graduated Metric Scale, Can Withstand Heating Up To 200-230˚c For Normal, Standard Use Service, Wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box, Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects, Comes With Brand, With Five (5) Years Existence In The Glass Wares Industry 10 Pc Beaker, 500ml, Type: Berzellius, Tall Form, Shape: Cylindrical Container With String Sides, A Flat Bottom, With Small Spout (or “beak”) To Aid Pouring, Material: Borosilicate, Clear, Bubble Free Glass, Berzellius, Tall Form With The Following Dimensions: A.) Outside Diameter Range: 75mm- 80mm, Height Range: 136mm- 140 Mm, Thickness: 1.5mm To 2.0mm, Capacity: 500 Ml, + 5% Etched/embossed Onto The Glass, With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions, With Large White Marking Spot, With Easy Pour Spout, Double Graduated Metric Scale, Marked To Fill: Graduation Starts At 0 Ml In 50ml Increments, Can Withstand Heating Up To 200-230˚c For Normal, Standard Use Service, Wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box, Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects, Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry 10 Pc Cork Borer, Shape Of Cork Borer: Long, Hollow Round Rod/ Tube With Sharpened Ends, Material Of Tube Rod: Nickel-plated Steel Borer, A Set Of Six (6) Different Diameter Sizes: (4 Mm, 4.5 Mm, 6 Mm, 8 Mm, 9.5 Mm, 11 Mm), Comes With A Handles Which Are Individually And Permanently Numbered (1-6) For Easy Identification Handle: T-shaped, Material Of Handle: Hard Plastic, Finish: Smooth, Color Of Handle: Red, Includes A Ramrod/ Eject Rod: Steel, Packaging: Resealable Plastic Pouch, Comes With A Brand 13 Pc Flask, Volumetric, Borosilicate, 250ml, Type: Class A, Shape: A Round Or Pear-shaped Buld, A Long Thin Neck Topped By A Snap Cap And With Flat Bottom, Material Of Body: Brosilicate, Clear, Transparent And Bubble-free, Glass With The Following Dimensions: Height:225 Mm, Outside Diameter: 78 Mm (approx), Size: 250ml, Tolerance: + 0.12ml, With Heavy Duty Rim, Comes With Snap Cap: Material Of Snap Cap: High Density Plastic (polyethylene) With Octagonal Drip, Snap Cap : No. 250, Color Of Snap Cap: Blue, Must Meet Astm E- 694 For Volumetric Ware, Astm E- 542 For Calibration Of Volumetric Ware And Astm E-288 For Volumetric Flasks. Calibrated “to Contain” (marked “tc” Or “in”), Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Country Of Origin To Certify That Their Items Are Calibrated, Must Be Free From Breakage, Cracks, Sharp Rims And Other Defects, Packaging: Roll Up Glassware In Newspaper And Secure With A Piece Of Masking Tape And Place In A Bubble Pouch And Individually Packed In A Study Box, Comes With A Brand, With Five (5) Years Existence In The Glasswares Industry 10 Pc Nichrome Wire 0.4, 100ft, Shape: Round Wire, Material Wire: Nichrome-alloy Of Nickel And Chromium, Ni80 Cr20 With The Following Dimensions: A.) Awg Size: 26 B.) Diameter:0.4 Mm C.) Length: 100 Ft, Form: Soft, Rust-free Wire, Color: Silver Grey, Resistance: 2.57 Ohms/foot, Annealed Soft, Perfectly Tensioned, Zero Elongation, Scratches, Or Other Flaws, Comes In A Spool, Packed In A Resealable Plastic Pouch, Comes With A Brand 10 Pc Ph Meter, Hand Held, Type: Portable Hand Held Digital Pen Type, Material: Plastic With The Following Dimensions: A.) Length: 6.2 In (155.45mm) (min), B.) Width: 1.5 In (38.1mm) (min), C.) Height: 1.3 In (33.02 Mm) (min), With Retractable Electrode, Comes Wit One (1) Piece Protective Cap, Electrodes Extend Up To 3.15” (80.01 Mm) (min), Waterproof, Ph Range: Ph 0 To Ph 14, Accuracy: + 0.2 Ph, Features A Bold Lcd Display Of Ph, With Automatic Temperature Compensation, Supplied With Accessories: A.) One (1) Bottle Ph 7.0 Buffer Solution Capacity Of Ph 7.0 Buffer Solution: 50ml, With One (1) Pc Calibration Screwdriver, One (1) Pc 9v Battery, Packed In Hard Plastic Carry Case, Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Coutry Of Origin To Certify That Their Items Are Calibrated, With User’s Manual In English, With Student Worksheets/ Teachers Manual In English, For Numbers 13-14, The Following Technical Specifications From A-e Must Be Followed: A.) For Contents List Of Materials, In Table Form B.) For User’s Manual, Teacher’s Guide, Studentworksheets, Instruction, Sheets/ Assembly Guides, In Sentences Format: I) With Sentences Grammatically Correct And, Ii) With Correct Spelling And Terminologies, Punctuations And Others C.) In Original Print, Not Photocopied D.) In Colored Pictures, Drawings/ Illustrations E.) In Ten (10) Mil Laminated Keycard That Shall Contain The Actual Colored Picture Of The Model Including The Name: Labeled With The Required Parts With Details As Follows: I) Paper Size: A4 Size, 80gsm Ii) Font: Times New Roman Iii) Font Size: 12 Iv) Orientation: Portrait V) Margin On All Sides With 2 Point Width Border Line Vi) Line With Arrow Head Of 1.25 Point With Width Shall Point To The Specifi Part Being Labeled 16. Must Be Free From Sharp Edges 17. Must Have Brand 12 Pc Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250ml, 1 Hole, Shape: Cylindrical With A Tapered Bottom End, Material: Premium Grade Sbr Black Compound With The Following Dimensions: A.) Height: 25mm, B.) Topǿ: 32 Mm, C.) Bottom Ǿ: 26mm, D.) Hole Ǿ: 5mm, Number Of Holes: With One Hole, Dimension Tolerance On Height, Top And Bottom Diameter: ± 0.5 Mm, Hardness: 40 ± 5 Duro, Packed In Resealable Plastic Bag, Comes With A Brand, Must Be Able To Seal The Openings Of Narrow Mouth 250ml Erlenmeyer Flasks And Other Laboratory Glassware That Require A Tighter Seal Or A Greater Degree Of Chemical Resistance With One (1)hole Opening For Insertion Of A Thermometer, Glass Tubing Or Stirrer For Use During Chemical Reaction To Prevent Leaks, Hazards And Contamination. 10 Pc Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 2 Holes, Shape: Cylindrical With A Tapered Bottom End, Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: Height: 25mm, Top Ǿ:32 Mm Bottom Ǿ: 26mm Hole Ǿ: 5mm Number Of Holes: 2 Holes, Dimension Tolerance On Height, Top And Bottom Diameter: ± 0.5 Mm, Hardness: 40 ± 5 Duro, Packed In Resealable Plastic Bag, Comes With A Brand 10 Pc Triangular File, Fine, 6” Long, With Plastic Handle, Type Of File: Triangular, Shape: Triangular, Material: High Carbon Steel, Kind Of File: Fine, Smooth, Length Of File: 6” (150-152.4 Mm) Long, Material Of Handle: Plastic, Packed In A Resealable Pouch, Comes With A Brand 10 Pc Universal Ph Paper, Ph 0-14, 100 Strips/pack, Type: Test Strips, Shape: Rectangle, Material: Cellulose/ Paper Nased, Dimension Of Ph Strip: A.) Length: 69 Mm X 6 Mm, Number Of Colors In Indicator Test Strip: In Four Colors To Test Ph Values, Number Of Test Strips: 100pc Strips, Packaging: Clear, Transparent Box, Shape Of Box: Square, With Complete Color Chart For Comparison With The Color Change To Get The Ph Reading Of The Sample Being Tested, No Sharp Edges On Box, Measures Ph 0-ph 14, Comes With A Brand 10 Pc Abc = ₱ 541,190.66