Wood Tenders

Description: 1- Teak Wood Flat D Shaped/j-type Moulding Size 75 Mm Width X 8 Mm Thickness X 7 Feet Length 2- Brass Door Latch Width 70 Mm (+/-5mm) And Length 45 Mm (+/-5mm) Design As Per Image

Description: CATEGORY: Crowbar 29mm dia , Chisel Carpenter 0.5Inch , Spade 1.4Kgs , Hammer 4.5 Kgs , Hammer 02 Kgs , Hammer 01 Kgs , Hammer 3.5Kgs , Hammer Ball pane 2Lbs , Hammer Ball pane 1Lbs , Hammer Ball pane 0.5inch , Hacksaw Frame 12Inch , Mason Square 18inch x 9inch , Pan Mortar 18inch dia , Hacksaw Blade 0.5inch x12inch , Tape metallic 30Mtr , Measuring tape Metallic 5Mtr , Tape Steel 30mtr , Tape Steel 15Mtr , Shovels 1.6 Kgs , Mason Trovel 150mm , Stone Carboran drun , Gurumala steel 10inch , Tape metallic 15mm , Weighing Machine 30 Kg Cap , Plumb Bob 225 Gram , Handle Wooden for Pic Axel , Pad Lock

Details: Description Procurement Of Science And Mathematics Equipment Packages To Public Elementary Schools For Grades 1 To 3 & Grades 4 To 6, Public Junior High Schools For Grades 7 To 10, And Public Senior High School For Grades 11 To 12 (core & Stem) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 541,190.66 Being The Abc To Payments Under The Contract For Procurement Of Science And Mathematics Equipment Packages To Public Elementary Schools For Grades 1 To 3 & Grades 4 To 6, Public Junior High Schools For Grades 7 To 10, And Public Senior High School For Grades 11 To 12 (core & Stem) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On March 04, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before March 17, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On March 17, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: General Specification: 1. Must Be Branded 2. Must Be Free From Toxic Materials 3. Must Be Properly Packed 4. Must Be Accompanied By A User’s Manual Written In English With Correct Grammar, Spelling And Punctuation Marks 5. “imported Products Should Pass International Quality Control Product Markings Such As Asqc, Afciq, Asq, Dgq, Eoqc, Iqa, Ce, Iso, Astm, And The Likes, While Locally Made Products (philippine-made) Should Pass The Local Quality Control Product Standards And Bear The Ps Mark.” Beaker, 500 Ml Increments: 10ml, Polyprolene Plastic, Height 12 Cm, Diameter: 8cm, Must Have A Container. 12 Pc Dry Cell, 9 Volts 21 Pc Miniature Guitar, Mini Acoustic Type, Half Size Guitar, Any Color, Surface Finish: Varnish, Made Of Good Quality Wood Without Sign Of Warp, Minimum Dimensions: Over All Length: 33 Inches, Width: 12 Inches, Depth: 3 ½ Inches, Standard Guitar Strings (no. 1-6), 18 Fret Minimum 10 Pc Set Of Tools Set Of Tools: Ball Pen Hammer, Handle Length Is 11”. 350g Approx. Weight, 1 Pc/set, Should Be Able To Peen Dent Surfaces In Metals 16 Set Set Of Tools: Long Nose Pliers, With Side Cutter, 6” Inches Long, Chrome Vanadium Material, 1 Pair/set Set Of Tools: Mechanical Wire Cutter And Pliers, 6.5” Inches, Chrome Vanadium Material, Should Be Able To Bend Large Wires, 1 Pair/set Set Of Tools: Precision Screwdrivers Set, 6 Pcs/set ( 3 Phillips, 3 Flats), With Plastic Casing, 1set/set Set Of Tools: Screwdriver, Flat, 3/16 Inches Tip Width X 6 Inches Long, Chromes Vanadium Material, 1 Pc/ Set Set Of Tools: Screwdriver, Phillips, Point Size Blade #3 X 6” Long, Chrome Vanadium Material, 1 Pc/set Set Of Tools: Soldering Iron, 60 Watts, Small Type, Wooden Handle, 1 Pc/set, Should Be Able To Heat Electrical Contacts For Permanent Joints Set Of Tools: Soldering Lead, Ǿ 1 Mm, Grade 60/40, Weight: 1 Lb./spool, 1 Spool/set Set Of Tools: Soldering Paste, All Purpose Flux, Non Corrosive, 50 Grams/can, 1 Can/set Set Of Tools: Tweezers, Stainless Steel, With Curved Tips, 6.5” Long, 1 Pair Set, Should Be Able To Hold And Pick Ti Y Electronics Components. Beaker, Borosilicate, 1000ml, Griffin Type, Transparent, Bubble Free Glass, Shape: A Cylindrical Container With Flat Bottom, Thickness Range: 1.5mm To 2.0mm, Permanent With Graduations, With Whiteenamel Marking Spot, Features An Easy-pour Spout, Capacity: 1000ml, + 10% Enameled Onto The Glass, Single Graduated Metric Scale, Graduation Starts St 200 Ml In 100ml Increments, Height Range: 140ml To 160mm, Outside Diameter: 100mm To 110 Mm, There Must Be No Cracks And Sharp Parts, Safely Packed In A Compartmentalized Box. 12 Pc Glass Cover Slips, 100’s/box, Pre-cleaned Cover Glasses And Not Sticking From Each Other, Material: Transparent Glass, Dimension: 22mm X 22 Mm Square, Thickness: 0.13 Mm – 0.17 Mm, There Shall Be No Chipped Edges, Safely Packed In A Plastic Box 10 Box Glass Slides, 72’sclear, Flat Glass, Free From Moisture, Dirt And Film, No Color, No Frost And No Chipped Edges, Dimension: 75mm (+ 1mm) X 25 Mm (+ 1mm), Thickness: 1.1 Mm (+ 0.1mm), No Sharp Edges And Pointed Corners, Packed In A Box Containing 72 Slides With Thin Paper Sheets In Between Them 10 Box Protractor, Student Type, Plastic, Transparent, Semi-circular, 180˚, Ǿ 150mm (or 75mm Radius), 1mm Thick (minimum), Angular Graduations Are In Degrees, From 0˚ To 180˚. With 2 Sets Of Numerals, One Reading Clockwise And Other Reading Counter Clockwise, Linear Graduations Are In Milimeters, From 0 To 100mm, With A Hole At Vertex Point Enough For A Fine String To Pass Through It, Plastic Surface Finish: Smooth, Clear And Free From Scratches, It Must Be Horizontally Level When Laid Flat On A Table- No Warping, Comes With A Plastic Case 10 Pc Ruler, Plastic, 12 Inches/ 30cm, Transparent, Smooth Surface, And 1 Mm Thick (minimum), Approximate Width X Length: 28mm X 314mm, Graduation: Metric Graduations On One Side While English Graduations On The Other Side: Metric Graduations Are In Centimeters, From 0 Cm To 30 Cm, With Every Cm Subdivided By 10. English Graduations Are In Inches, From 0 Inches To 12 Inches With Every Inch Subdivided By 16. Clear, Readable Black, Non-groove Permanent Prints ( Will Not Fade And Canot Be Scratched Off), Bendable Up To U-shape When Held At Both Ends And Item Shall Be Free From Toxic Materials. 10 Pc Beaker, 100ml, Type: Griffin, Low Form, Shape: Cylindrical Container With Straight Sides, A Flat Bottom And With Small Spout (or “beak”) To Aid In Pouring, Material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter: 50mm-52mm, Height: 70mm-72mm, Thickness: 1.5mm-2.0mm, Capacity: 100ml + 5% Etched Onto The Glass, Graduation Starts At: 20ml To 180ml, With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions, With Large White Marking Spot, Fwatures An Easy-pour Spout, With Single Graduated Metric Scale, Can Withstand Heating Up To 200-230˚c For Normal, Standard Use Service, Wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box, Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects, Comes With Brand, With Five (5) Years Existence In The Glass Wares Industry 10 Pc Beaker, 500ml, Type: Berzellius, Tall Form, Shape: Cylindrical Container With String Sides, A Flat Bottom, With Small Spout (or “beak”) To Aid Pouring, Material: Borosilicate, Clear, Bubble Free Glass, Berzellius, Tall Form With The Following Dimensions: A.) Outside Diameter Range: 75mm- 80mm, Height Range: 136mm- 140 Mm, Thickness: 1.5mm To 2.0mm, Capacity: 500 Ml, + 5% Etched/embossed Onto The Glass, With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions, With Large White Marking Spot, With Easy Pour Spout, Double Graduated Metric Scale, Marked To Fill: Graduation Starts At 0 Ml In 50ml Increments, Can Withstand Heating Up To 200-230˚c For Normal, Standard Use Service, Wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box, Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects, Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry 10 Pc Cork Borer, Shape Of Cork Borer: Long, Hollow Round Rod/ Tube With Sharpened Ends, Material Of Tube Rod: Nickel-plated Steel Borer, A Set Of Six (6) Different Diameter Sizes: (4 Mm, 4.5 Mm, 6 Mm, 8 Mm, 9.5 Mm, 11 Mm), Comes With A Handles Which Are Individually And Permanently Numbered (1-6) For Easy Identification Handle: T-shaped, Material Of Handle: Hard Plastic, Finish: Smooth, Color Of Handle: Red, Includes A Ramrod/ Eject Rod: Steel, Packaging: Resealable Plastic Pouch, Comes With A Brand 13 Pc Flask, Volumetric, Borosilicate, 250ml, Type: Class A, Shape: A Round Or Pear-shaped Buld, A Long Thin Neck Topped By A Snap Cap And With Flat Bottom, Material Of Body: Brosilicate, Clear, Transparent And Bubble-free, Glass With The Following Dimensions: Height:225 Mm, Outside Diameter: 78 Mm (approx), Size: 250ml, Tolerance: + 0.12ml, With Heavy Duty Rim, Comes With Snap Cap: Material Of Snap Cap: High Density Plastic (polyethylene) With Octagonal Drip, Snap Cap : No. 250, Color Of Snap Cap: Blue, Must Meet Astm E- 694 For Volumetric Ware, Astm E- 542 For Calibration Of Volumetric Ware And Astm E-288 For Volumetric Flasks. Calibrated “to Contain” (marked “tc” Or “in”), Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Country Of Origin To Certify That Their Items Are Calibrated, Must Be Free From Breakage, Cracks, Sharp Rims And Other Defects, Packaging: Roll Up Glassware In Newspaper And Secure With A Piece Of Masking Tape And Place In A Bubble Pouch And Individually Packed In A Study Box, Comes With A Brand, With Five (5) Years Existence In The Glasswares Industry 10 Pc Nichrome Wire 0.4, 100ft, Shape: Round Wire, Material Wire: Nichrome-alloy Of Nickel And Chromium, Ni80 Cr20 With The Following Dimensions: A.) Awg Size: 26 B.) Diameter:0.4 Mm C.) Length: 100 Ft, Form: Soft, Rust-free Wire, Color: Silver Grey, Resistance: 2.57 Ohms/foot, Annealed Soft, Perfectly Tensioned, Zero Elongation, Scratches, Or Other Flaws, Comes In A Spool, Packed In A Resealable Plastic Pouch, Comes With A Brand 10 Pc Ph Meter, Hand Held, Type: Portable Hand Held Digital Pen Type, Material: Plastic With The Following Dimensions: A.) Length: 6.2 In (155.45mm) (min), B.) Width: 1.5 In (38.1mm) (min), C.) Height: 1.3 In (33.02 Mm) (min), With Retractable Electrode, Comes Wit One (1) Piece Protective Cap, Electrodes Extend Up To 3.15” (80.01 Mm) (min), Waterproof, Ph Range: Ph 0 To Ph 14, Accuracy: + 0.2 Ph, Features A Bold Lcd Display Of Ph, With Automatic Temperature Compensation, Supplied With Accessories: A.) One (1) Bottle Ph 7.0 Buffer Solution Capacity Of Ph 7.0 Buffer Solution: 50ml, With One (1) Pc Calibration Screwdriver, One (1) Pc 9v Battery, Packed In Hard Plastic Carry Case, Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Coutry Of Origin To Certify That Their Items Are Calibrated, With User’s Manual In English, With Student Worksheets/ Teachers Manual In English, For Numbers 13-14, The Following Technical Specifications From A-e Must Be Followed: A.) For Contents List Of Materials, In Table Form B.) For User’s Manual, Teacher’s Guide, Studentworksheets, Instruction, Sheets/ Assembly Guides, In Sentences Format: I) With Sentences Grammatically Correct And, Ii) With Correct Spelling And Terminologies, Punctuations And Others C.) In Original Print, Not Photocopied D.) In Colored Pictures, Drawings/ Illustrations E.) In Ten (10) Mil Laminated Keycard That Shall Contain The Actual Colored Picture Of The Model Including The Name: Labeled With The Required Parts With Details As Follows: I) Paper Size: A4 Size, 80gsm Ii) Font: Times New Roman Iii) Font Size: 12 Iv) Orientation: Portrait V) Margin On All Sides With 2 Point Width Border Line Vi) Line With Arrow Head Of 1.25 Point With Width Shall Point To The Specifi Part Being Labeled 16. Must Be Free From Sharp Edges 17. Must Have Brand 12 Pc Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250ml, 1 Hole, Shape: Cylindrical With A Tapered Bottom End, Material: Premium Grade Sbr Black Compound With The Following Dimensions: A.) Height: 25mm, B.) Topǿ: 32 Mm, C.) Bottom Ǿ: 26mm, D.) Hole Ǿ: 5mm, Number Of Holes: With One Hole, Dimension Tolerance On Height, Top And Bottom Diameter: ± 0.5 Mm, Hardness: 40 ± 5 Duro, Packed In Resealable Plastic Bag, Comes With A Brand, Must Be Able To Seal The Openings Of Narrow Mouth 250ml Erlenmeyer Flasks And Other Laboratory Glassware That Require A Tighter Seal Or A Greater Degree Of Chemical Resistance With One (1)hole Opening For Insertion Of A Thermometer, Glass Tubing Or Stirrer For Use During Chemical Reaction To Prevent Leaks, Hazards And Contamination. 10 Pc Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 2 Holes, Shape: Cylindrical With A Tapered Bottom End, Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: Height: 25mm, Top Ǿ:32 Mm Bottom Ǿ: 26mm Hole Ǿ: 5mm Number Of Holes: 2 Holes, Dimension Tolerance On Height, Top And Bottom Diameter: ± 0.5 Mm, Hardness: 40 ± 5 Duro, Packed In Resealable Plastic Bag, Comes With A Brand 10 Pc Triangular File, Fine, 6” Long, With Plastic Handle, Type Of File: Triangular, Shape: Triangular, Material: High Carbon Steel, Kind Of File: Fine, Smooth, Length Of File: 6” (150-152.4 Mm) Long, Material Of Handle: Plastic, Packed In A Resealable Pouch, Comes With A Brand 10 Pc Universal Ph Paper, Ph 0-14, 100 Strips/pack, Type: Test Strips, Shape: Rectangle, Material: Cellulose/ Paper Nased, Dimension Of Ph Strip: A.) Length: 69 Mm X 6 Mm, Number Of Colors In Indicator Test Strip: In Four Colors To Test Ph Values, Number Of Test Strips: 100pc Strips, Packaging: Clear, Transparent Box, Shape Of Box: Square, With Complete Color Chart For Comparison With The Color Change To Get The Ph Reading Of The Sample Being Tested, No Sharp Edges On Box, Measures Ph 0-ph 14, Comes With A Brand 10 Pc Abc = ₱ 541,190.66

Details: Description The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Suppliers Registered With The Philippine Government Electronic Procurement System (philgeps), To Quote Their Lowest Price For The Hereunder Contract, Subject To The General Conditions Stated Herein. Name Of Project: Rfq Of Materials For Solar Powered Electric Vehicle And Tools And Materials For Charter Anniversary Location: Neust- Cabanatuan City Approved Budget For The Contract: Php343,824.20 Source Of Fund: Income Cost Of Bidding Documents: Php500.00 Item Description: One (1) Lot Item No. Qty Unit Item And Description Nathaniel Oliveros 1 10 Pcs. Plywood, ¾” X 4” X 8” 2 4 Pcs. Gi Pipe, ½” Sch40, Seamless 3 4 Pcs. Gi Pipe, ¾” Sch40, Seamless 4 4 Pcs. Gi Pipe, 1” Sch40, Seamless 5 4 Pcs. Gi Plain Sheet (1.3mm) 4x8 6 4 Pcs. Gi Plain Sheet (1.0mm) 4x8 7 4 Pcs. Gi Plain Sheet (0.9mm) 4x8 8 4 Pcs. Gi Tubular 1x1 (1.2mm) 9 4 Pcs. Gi Tubular 1x1 (1.5mm) 10 4 Pcs. Gi Tubular 2x2 (1.5mm) 11 4 Pcs. Gi Tubular 1x2 (1.5mm) 12 4 Pcs. Welding Rod (e-6013) 2.5mm 1/8 13 10 Pcs. Angle Bar 1x1, Thickness 3mm 14 10 Pcs. Angle Bar 2x2, Thickness 3mm 15 10 Pcs. Angle Bar 2x2, Thickness 4.5mm 16 10 Pcs. Angle Bar 2x2, Thickness 6mm 17 20 Pcs. Flat Bar 20mm X 3mm Thick 18 10 Pcs. Flat Bar 25mm X 3mm Thick 19 10 Pcs. Flat Bar 32mm X 3mm Thick 20 10 Pcs. Flat Bar 40mm X 3mm Thick 21 10 Pcs. Flat Bar 50mm X 3mm Thick 22 20 Pcs. Flat Bar 15mm X 5mm Thick 23 10 Pcs. Flat Bar 50mm X 6mm Thick 24 10 Pcs. Flat Bar 20mm X 5mm Thick 25 1 Pc. Gi Pipe 2x1/2 Super Thick Jeric Aduna 26 44 Pcs. Gi Tubular 2x2x1.5 27 24 Pcs. Gi Tubular 1x2x1.2 28 25 Kgs. Welding Rod 2.5mm 29 4 Pcs. Cut Off Disc 14” 30 2 Box Grinding Disc 4” 31 2 Box Flap Disk 4” 32 1 Gal. Metal Puffy(body Filler) 33 2 Gal. Metal Primer (gray) 34 2 Gal. Lacquer Thinner 35 4 Pcs. Paint Roller (cotton 4”) 36 2 Pcs. Paint Tray 4” 37 100 Pcs. Expansion Bolt 8mm 38 2 Box Metal Screw 1” (black) 39 1 Pc. Gi Pipe, 1” Sch40 40 1 Pc. Gi Pipe 1 ¼” 41 4 Pcs. Paint Brush 3” 42 3 Pcs. Drill Bit For Metal 8mm 43 1 Gal. Acrylic Paint For Metal (blue) 44 1 Pc. Welding Machine (portable, 350 Amp) Participant Latex Paint 45 22 Gal. Flat White 46 11 Gal. Lamp Black 47 11 Gal. Hansa Yellow 48 11 Gal. Toulodine Red 49 11 Gal. Thalo Blue 50 40 Pcs. Marine Plywood ½ 51 6 Gal. Primer: Flat White Latex 52 3 Gal. Emulsion (topcoat) 53 5 Roll Sakolin (6ft. X 50mtrs.) 54 3 Pcs. Heavy Duty Gun Tacker 55 3 Box Staple Wire For Gun Tacker 56 3 Kls. 2.5 Inch Wood Nails 57 20 Pcs. Good Lumber (2x2x12) 58 4 Pcs 3/4 Thick Plyboard General Conditions Upon Submission Of Duly Accomplished And Signed Request For Quotation Form (annex “a”), The Following Documents Shall Be Attached. Failure To Comply/submit With Any Of The Following Requirements Shall Be A Basis For Disqualification: 1. Official Receipt Of Payment Of Bid Document 2. Certified True Copy Of Mayor's/business Permit 3. Certified True Copy Of Certificate Of Philgeps Registration 4. Certified True Copy Of Income/business Tax Return (for Abc’s Above P500k) 5. Omnibus Sworn Statement (oss), Duly Notarized 6. Spa Or Secretary’s Certificate If The Bidder Is An Authorized Representative, Duly Notarized All Quotations Shall Be Considered As Fixed Prices And Not Subject To Price Escalation During Contract Implementation. Any Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Supplier Or His/her Authorized Representative. The Bac Is Conducting The Alternative Mode Of Procurement (small Value Procurement) For This Contract In Accordance With Ra 9184 And Its Implementing Rules And Regulations (irr). The Quotation And Eligibility Documents Must Be Submitted In A Sealed Envelope On Or Before March 03, 2025, 05:00 Pm At The Procurement Office, Neust, Gen. Tinio St. Campus, Cabanatuan City. Fax Or Email Quotations Will Not Be Honored. Section 39 Of Ra No. 9184, Requires The Winning Bidder To Post A Performance Security, In Such Form And Amount Specified Under Section 39 Of The 2016 Revised Irr, Prior To The Signing Of The Contract As A Measure Of Guarantee For The Faithful Performance Of And Compliance With His Obligations Under The Contract Prepared In Accordance With The Bidding Documents The Neust Reserves The Right To Reject Any Or All Quotations, To Waive Any Minor Defects Therein, To Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Neust Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation. For More Information Concerning This Bidding, Please Contact: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neustproc.unit@gmail.com Approved By: Dr. Honorato P. Panahon Bac Chairperson Bac Chairperson

Description: The Ministry of Defence's Materiel and Procurement Board intends to enter into a framework agreement for paints and related products. The products on the framework agreement shall be used for the protection and concealment of the Defence's materiel and vehicles. The products shall be usable on both interior and exterior surfaces of the Defence's vehicles, and for concealment and protection of other materiel. The products shall be usable with other materials, such as steel, galvanized steel, phosphate steel, light metals, plastics, and wood. For certain products on the agreement, the supplier on the agreement shall cooperate with the Defence's laboratory on testing and approving these products before first delivery. For certain products on the agreement, the Defence's laboratory shall approve each batch before it can be put into service by the Defence.

Details: Description Supply And Delivery Of: 397 Pc Plaque, With Attached Design For Dswd 74th Anniversary (loyalty Award Plaque 397) ********* Nothing Follows ********* Note: - Specifications: Overall Height: 10 Inches Overall Preferred Width: 7.5 Inches ( Could Be Adjusted To Ensure The Layout Will Not Be Distorted) Wood: Polished, Natural Oak Color Wood Printing: Deep Laser Engraved Wood Base Thickness: 1.5-2 Inches Wood Base Height: 1.5 Inch Acrylic Thickness: 6mm (clear) I 4mm (black) Acrylic Height: 8.5 Inches Acrylic Print: Direct Printing ************************************************************************************* Charged To Pantawid Pamilya Implementation Of Cct (mooe Regular Fund-cmf Current App) Approved Budget For The Contract (abc): Php 714,600.00

Description: Administrative Concession for the Private Provision of the Plot Located in the Cortes Ecopark for the Purpose of Carrying Out the Operations of Selection, Classification and Crushing of Wood Waste.

Details: Description Technical Description: A. Materials: 2 Kls. Nail 15 Pcs. Plywood (marine) 2 Pcs. Steel Mating 1 Ltr. Paint (dirty White) 5 Ltrs. Wood Paint (dirty White) 3 Kls. Nail #3 1 Kls. Nail #4 1 Kls. Nail #2 1/2 1 Pc. Breaker 3 Pcs. Socket 3 Pcs. Receptacle 3 Pcs. Light Bulb 3 Pcs. Switch 20 Mtrs. Wire 1 Pc. Toilet Bowl 10 Bags. Cement 450 Pcs. Floor Tiles 60x60 2 Cu.m Sand 30 Bd.ft Good Lumber 2x3x12 12 Bd.ft Good Lumber 2x5x12 2 Pcs. Pvc Pipe 2 Pcs.entrance Cap 1/2 1 Pcs. Safety Breaker 3 Pcs. Junction Box 3 Pcs. Switch (round) 3 Pcs. Receptacle (2x2) 1 Box Staple Wire #1 1 Pc. Electrical Tape (big) 12 Pcs. Black Screw 2 Pcs. Bushing 1 1/2 3 Pcs Adaptor 1/2 12 Mtrs. Pdx Wire #14 10 Mtrs. Pdx Wire #12 5 Mtrs. Pdx Wire#10 3 Mrts. Thhd Wire #12 2 Pcs. Outle (3 Gang) B. Labor By Administration: 25,910.50

Description: Mapping 3 Innovative Wooden Structures in Møre Og Romsdal

Details: Description Project Title: Repair Of Ceiling-quisumbing 116 Classroom 1. General Overview This Project Involves The Repair And Rehabilitation Of The Ceiling In Quisumbing 116 Classroom To Ensure Structural Integrity, Safety, And Improved Aesthetics. The Scope Covers Demolition, Ceiling Framework Restoration, Installation Of New Ceiling Materials, Painting, And Electrical Work If Necessary. 2. Scope Of Work A. Site Preparation & Demolition 1. Conduct An Initial Site Assessment To Evaluate The Extent Of Ceiling Damage. 2. Removal Of Damaged Ceiling Panels, Framework, And Insulation Materials. 3. Proper Disposal Of Debris Following Environmental And Safety Guidelines. 4. Protection Of Classroom Furniture, Fixtures, And Flooring From Dust And Damage. B. Ceiling Structural Repairs 1. Inspection And Reinforcement Of Ceiling Joists And Framing If Required. 2. Replacement Of Damaged Wooden Or Metal Framing Components. 3. Application Of Anti-termite Treatment (for Wooden Framing). 4. Ensuring Structural Stability Before New Ceiling Installation. C. Ceiling Installation 1. Supply And Installation Of New Ceiling Materials (e.g., Gypsum Board, Fiber Cement Board, Or Other Approved Materials). 2. Secure Mounting And Alignment Of Ceiling Panels. 3. Application Of Joint Compounds, Sanding, And Surface Finishing For A Seamless Appearance. D. Painting & Finishing Works 1. Application Of Primer And Two Coats Of Paint As Per Approved Color Scheme. 2. Touch-ups And Final Inspection To Ensure Quality Finish. E. Electrical Works (if Necessary) 1. Inspection And Reinstallation Of Lighting Fixtures, Wiring, And Electrical Components. 2. Replacement Of Damaged Electrical Conduits Or Junction Boxes. 3. Proper Securing Of Wiring Within The Ceiling Structure. F. Testing & Final Inspection 1. Thorough Quality Check Of The Repaired Ceiling Structure. 2. Cleaning Of The Work Area And Removal Of Construction Debris. 3. Final Walkthrough With School Representatives For Approval And Acceptance. 3. Deliverables • Fully Repaired And Finished Ceiling In Quisumbing 116 Classroom. • Functioning Electrical And Lighting System (if Applicable). • Properly Disposed Of Debris And Cleaned Work Area. 4. Exclusions (if Any) • Repairs Beyond The Specified Ceiling Area. • Additional Structural Modifications Not Covered In The Agreement.