WaterproofingKeyword

Department Of Public Works And Highways - DPWH Tender

Closing Date21 Jan 2025

Tender AmountPHP 136 Million (USD 2.3 Million)

Details: Description Invitation To Bid (cw-12-2024-033) 1. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts 1.1 Name Of Contract : Organizational Outcome 1 : Ensure Safe And Reliable National Road System, Network Development Program, Construction Of By-pass And Diversion Roads, Construction Of Lipa City-mataas Na Kahoy Diversion Rd. Leading To Taal Circumferential Road Phase 5, Batangas Contract Id No. : 24dd0275 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 1,645.50 L.m. 6-lane Road With Complete Features(solar Streetlights, Sidewalk, Bicycle Lane, Curb & Gutter, Slope Protection And Median Barrier Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2024 General Appropriations Act (gaa) Contract Duration : 270 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.2 Name Of Contract : Organizational Outcome 1 : Ensure Safe And Reliable National Road System, Network Development Program, Construction Of By-pass And Diversion Roads, Construction Of Lipa City-mataas Na Kahoy Diversion Rd. Leading To Taal Circumferential Road Phase 6, Batangas Contract Id No. : 24dd0276 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 281.00 L.m. 6-lane Road With Width Of 30.00m And Thickness Of 0.30m Including Slope Protection Using Cribwall And Mechanically Stabilized Earth Wall Structure Vegetated Facia, Drainage, Sidewalk, Bicycle Lane And Solar Streetlights Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2024 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.3 Name Of Contract : Organizational Outcome 1 : Ensure Safe And Reliable National Road System, Network Development Program, Construction Of By-pass And Diversion Roads, Construction Of Lipa City-mataas Na Kahoy Diversion Rd. Leading To Taal Circumferential Road Phase 7, Batangas Contract Id No. : 24dd0277 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Bridge Foundation (23 Sets Of Pile Cap With 4-1.0m Dia. X 25.00 L.m. Height Bored Pile Each & 2-1.0m Dia. X 25.00 L.m. Height Bored Pile) Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2024 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.4 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Access Roads And/or Bridges From The National Road/s Leading To Major/strategic Public Building/facilities, Construction Of Lipa City - Mataasnakahoy Diversion Rd Leading To Taal Circumferential Road, Phase 8, Batangas Contract Id No. : 25dd0084 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 308.00 L.m. 6-lane Road With Width Of 30.00m And Thickness Of 0.30m Including Slope Protection Using Cribwall And Mechanically Stabilized Earth Wall Structure Vegetated Facia, Drainage, Sidewalk, Bicycle Lane And Solar Streetlights Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.5 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Access Roads And/or Bridges From The National Road/s Leading To Major/strategic Public Building/facilities, Construction Of Lipa City - Mataasnakahoy Diversion Rd Leading To Taal Circumferential Road, Phase 9, Batangas Contract Id No. : 25dd0085 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 405.00 L.m. 6-lane Road With Width Of 30.00m And Thickness Of 0.30m Including Slope Protection Using Cribwall And Mechanically Stabilized Earth Wall Structure Vegetated Facia, Drainage, Sidewalk, Bicycle Lane And Solar Streetlights Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.6 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Access Roads And/or Bridges From The National Road/s Leading To Major/strategic Public Building/facilities, Construction Of Lipa City - Mataasnakahoy Diversion Rd Leading To Taal Circumferential Road, Phase 11, Batangas Contract Id No. : 25dd0086 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 434.00 L.m. 6-lane Road With Width Of 30.00m And Thickness Of 0.30m Including Slope Protection Using Cribwall And Mechanically Stabilized Earth Wall Structure Vegetated Facia, Drainage, Sidewalk And Bicycle Lane Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.7 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Access Roads And/or Bridges From The National Road/s Leading To Major/strategic Public Building/facilities, Construction Of Lipa City - Mataasnakahoy Diversion Rd Leading To Taal Circumferential Road, Phase 12, Batangas Contract Id No. : 25dd0087 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 446.00 L.m. 6-lane Road With Width Of 30.00m And Thickness Of 0.30m Including Slope Protection Using Cribwall And Mechanically Stabilized Earth Wall Structure Vegetated Facia, Drainage, Sidewalk, Bicycle Lane And Solar Streetlights Approved Budget For The Contract : Php 193,000,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium B License Category : A Amount Of Bidding Documents : Php 50,000.00 1.8 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Major/strategic Public Buildings/facilities, Construction Of Multi-purpose Building, Department Of Health Regional Office - Region 4a (phase 3), Lipa City, Batangas Contract Id No. : 25dd0088 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Four (4) Storey Multi-purpose Building (108.10m X 44.10m) Including Concreting Of Structural Frame From Lower Ground Floor To Roof Level (grid 1-12) And Lower Ground Floor To Upper Ground Floor (grid 12-19), Concreting Of Lower Ground Floor Slab And Main Entrance, Plumbing Rough-ins, Waterproofing Works, Embankment Works (main Entrance) And Installation Of Roof Rafters Approved Budget For The Contract : Php 144,750,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.9 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Interjurisdictional Roads And/or Bridges (roads That Traverse Multiple Lgu Jurisdictions), Construction Of Manila-batangas - Bugtong Na Pulo - Star Tollway Interchange, Package D, Bugtong Na Pulo, Lipa City, Batangas Contract Id No. : 25dd0089 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 70.00 L.m. 6-lane Steel Bridge (bored Pile To Coping Beam) Approved Budget For The Contract : Php 136,065,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.10 Name Of Contract : Convergence And Special Support Program, Sustainable Infrastructure Projects Alleviating Gaps (sipag), Interjurisdictional Roads And/or Bridges (roads That Traverse Multiple Lgu Jurisdictions), Construction Of Manila-batangas - Bugtong Na Pulo - Star Tollway Interchange, Package E, Bugtong Na Pulo, Lipa City, Batangas Contract Id No. : 25dd0090 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 70.00 L.m. 6-lane Steel Bridge (steel Girders, Cross Bracing And Steel Decking) Approved Budget For The Contract : Php 135,187,815.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 257 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.11 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Flood Mitigation Structures Protecting Major/ Strategic Public Buildings/ Facilities, Construction Of Drainage Structure, Barangay Dagatan, Lipa City, Batangas Contract Id No. : 25dd0091 Project Location : Lipa City, Batangas Scope Of Works : Construction Of 570.00 L.m. 910mm Dia. Rcpc Drainage Including Manhole With Average Height Of 1.70m To 7.80m Approved Budget For The Contract : Php 14,850,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 154 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 25,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, And Inspect The Bidding Documents At Marawoy, Lipa City, Batangas During Weekdays From 08:00 A.m To 05:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27, 2024 To January 20, 2025, 8:00 A.m.-5:00 P.m.; January 21, 2025, 8:00 A.m.-9:15 A.m From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Pursuant To The Latest Guidelines Issued By The Gppb Amounting To The Responding Cost Of Bidding Documents Indicated On The Above Table. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Dpwh Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office Will Hold A Pre-bid Conference Physically And/or Through Live-streamed On Youtube On January 09, 2025 At 09:00 A.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Which Shall Be Open To Prospective Bidders. For Youtube Livestreaming, Https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. For Bids To Be Submitted Electronically/online, The Following Procedures Should Be Observed Following Department Order No. 87, Series Of 2020. It Is Also Indicated In The Bds. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_batangas4@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025 At 09:30 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 9. Bid Opening Shall Be On January 21, 2025 At 09:30 A.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas And Through Live-streamed On Youtube (https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 10. "if At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Irr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. " 11. The Dpwh-batangas Iv District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. All Representatives Who Will Submit Their Bids Must Be Duly Authorized And Registered Liaison Officers As Reflected In The Contractor Registration Certificate (crc). Authorized Representatives Are Required To Present Their Company Ids And Government Id For Verification Purposes. 13. Please Be Informed That On The Day Of Bid Opening, The Approved Appointment Intended For Purchasing Bidding Documents Will Be Limited To Ten (10) Prospective Bidders Only To Strictly Follow The Bid Opening Schedule. Secure The Approved Appointment To Dpwhbats4appointment@gmail.com 14. For Further Information, Please Refer To: Leo S. Matias Engineer Iii Bac, Chairperson Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Matias.leo@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com Queen Mariciel J. Sianquita Engineer Ii Head, Bac Secretariat Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Sianquita.queen_mariciel@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph & Www.philgeps.gov.ph For Online Bid Submission At Electronicbids_batangas4@dpwh.gov.ph December 26, 2024 Approved By: Leo S. Matias Bac, Chairperson Noted By: Juan J. Panganiban Officer-in-charge Office Of The District Engineer Date Of Publication: December 27, 2024 To January 02, 2025 Publication: Dpwh Website/ Philgeps

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 193 Million (USD 3.3 Million)

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 144.7 Million (USD 2.4 Million)

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 14.8 Million (USD 255.8 K)

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 135.1 Million (USD 2.3 Million)

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 193 Million (USD 3.3 Million)

Download

Department Of Public Works And Highways - DPWH Tender

Philippines

Closing Date21 Jan 2025

Tender AmountPHP 193 Million (USD 3.3 Million)

Download

DEPT OF THE ARMY USA Tender

United States

Closing Date27 Jan 2025

Tender AmountRefer Documents

Details: As Of 30 December 2024, The Following Amendments Have Been Made:1) The Size Standard Statement Has Been Removed And 2) The Project Manager (pm) Has Been Updated To Include R.a. Required. 1. Contract Information: these Contracts Are Procured As A Small Business Set-aside. The Naics Code’s Are 541330 And 541310. the Number One, Two And Three Ranked Small Business Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. The Length Of Each Indefinite Delivery Contract (idc) Is A Maximum Of 60 Months And Will Not Include Optional Time Periods. Three (3) Idc’s Will Share $49.9m Total Capacity Of The Matoc. Task Orders Will Be Issued By Negotiated Firm-fixed-price Task Orders To The Most Technically Qualified Offeror In Response To The Task Order Requirement Notification (torn) And Will Be Issued Under The Terms And Conditions Of This Matoc. The Government Guarantees A Minimum Value Of $4,000 Seed Task Order For Each Individual Idc. Labor Rates For Each Discipline, Overhead Rates, And Escalation Factors For Each 1 Year Time Period Will Be Negotiated For Each Basic Idc And Profit Will Be Negotiated For Each Task Order Not For Each Basic Idc. work Distribution Between Idcs: Task Orders (to) Will Be Distributed According To The Experience And Qualifications Of The A-e Firms. The Specific Contractor Chosen For A To Will Be Selected Based On Factors Such As Technical Expertise, Demonstrated Performance, Specific Ability, To Size And Complexity, And Contractor Availability To Complete The To In The Time Required. We Are Going To Have The A-e Firms To Compete Amongst The Highly Qualified Selectees For This Contract. Above All, It Is The Intent Of The New York District To Not Have A “hollow” Contract. three (3) Indefinite Delivery Contracts Will Be Negotiated That Includes Level Of Efforts, Labor Rates For Each Discipline And Overhead Rates For The Contract Period. Profit Will Be Negotiated In Each Task Order Not In The Basic Contract. the Selected Small Business A-e Firms Will Need To Demonstrate Capability To Perform At Least 51% Of The Contract Work Listed Below In Accordance With Ep 715-1, Chapter 3-8 C Which Can Be Found At Http//www.usace.army.mil/publications/eng.pamphlets/ep715-1-7 in Particular, In Order To Be Awarded A Small Business Contract The Concern Will Perform At Least 51 Percent Of The Cost Of The Contract Incurred From Personnel With Its Own Employees. “any Subcontractor And Outside Associates Or Consultants Required By The Contractor (prime A-e Firm) In Connection With The Services Covered By The Contract Will Limit To Individuals Or Firms That Were Specifically Identified And Agreed To During Negotiations The Contractor Shall Obtain The Contracting Officer’s Written Consent Before Making Substitutions For These Subcontractors, Associates Or Consultants”. if A Substitution Is Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason, The Selected A-e Firm Shall Notify The Contracting Officer In Writing Within 15 Calendar Days After The Concurrences Of Any Of These Events And Provide The Following Information To The Contracting Officer: required Information For Substitution Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason: The Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitution, Complete Resumes For The New Proposed Substitutes, And Any Additional Information Requested By The Contracting Officer. Proposed Substitutes Should Have Comparable Qualifications Or Better Qualifications To Those Of The Persons Being Replaced. The Contracting Officer Will Notify The Contractor Within 15 Calendar Days After Receipt Of All Required Information Of The Decision On Substitutions. approximate Award Date: June 2025 the Wages And Benefits Of Services Employees (see Far 22.10) Performing Under This Contract Must Be At Least Equal To Those Determined By The Department Of Labor Under The Service Contract Act, As Determined Relative To The Employee’s Office Location (not Of The Location Of The Work). To Be Eligible For A Contract Award, The Firm Must Be Registered In The Dod Central Contractor Registration (ccr). Registered Via The Ccr Internet Site At Http://www.ccr.gov Or By Contacting The Dod Electronic Commerce Information Center At 1-800-334-3414. 2. Project Information: a-e Services May Include But Not Be Limited To The Following: general Architect Engineering Services To Include Support Of The Milcon Programs, Sustainment, Restoration And Modernization (srm) Program, Iis Program And Other Non-military Construction Programs Within Nan/nad Boundaries. architect Engineering (a-e) Services For Smaller Scale Projects Typically With A Construction Cost Of Approximately $10m Or Less To Include The Following: construction Of New And Renovation/upgrade Of Multiple Hangar/buildings, Maintenance, Training Facilities (hands-on/simulators), Aviation Facilities, Runways And Taxiways, Aircraft Fueling Facilities/distribution, Industrial Facilities, Vehicle Maintenance Facilities, Research & Design Facilities (armament, Munitions And Communications), Munitions And Storage Facilities, Dining Facilities, Academic Labs, Barracks/dormitories, Academic Facilities, Administrative Office Buildings antarctic/cold Region Construction. whole And/or Partial Building Renovations Which Address Interior Re-configuration, Life/safety, Energy Conservation, And Utility Systems. architectural Alterations Which Address New Space Requirements, Programmed Functions Such As: Maintenance, Training Facilities, Storage, Administrative Spaces, And Squad/ops. new Building Exterior And Envelope (cold Region) Shall Follow The Architectural Compatibility Plan Defined At The Base Inclusive Of, Structural Roof Systems, Insulation And Waterproofing, Windows, And Atfp. mechanical/electrical/plumbing (mep): Fire Suppression And Water Supply Systems, Fire Alarm And Mass Notification System, Cybersecurity, Fire Detection/protection/monitoring And Controls, Heating And Ventilation Systems, Plumbing Systems, Electrical Systems, Telecommunication And Cabling Systems, Closed Circuit Television (cctv), Alarm And Card Access Systems, And Public Address Systems. topographic Surveys, Geological Surveys, Geotechnical Investigations, Environmental Investigations, Master Planning Studies, Value Engineering Studies, Field Investigation Studies, Construction Support Services. asbestos And Lead Abatement Services Related To Building Renovation Or Demolition. perform/conduct Design Charrettes Including Eco-charrettes prepare Studies (to Include Building, Energy, Life-cycle Studies) prepare Parametric Designs, To Include Development Of Dd Form 1391 Preparation. site & Infrastructure/seismic Design In Accordance With The Ufc’s development Of Design Criteria And Basis Of Design design Work Analysis And Technical Specifications nepa Documentation And Coordination historic Architecture And Section 106 Consultation preparation Of Permit Applications. preparation Of Design/build Documents preparation Of Arctic Foundation Designs, Building Air Tightness And Hvac Performance For Cold/arctic Regions. preparation Of Designs Including Hemp And Scif Areas. preparation Final Design Construction Documents antiterrorism/force Protection Design In Accordance With Applicable Ufc’s sustainable Design/gbi/net Zero Strategy Development cost Estimating Using The Latest Version Mii [m2] Software. value Engineering Studies And Cost Schedule Risk Analysis (csra). preparation Of Deliverables In Building Information Modeling (bim) Format. drawings In Accordance With The Architectural/engineering/construction (a/e/c) Computer-aided Standard Version (cadd) demonstrated Construction Phase Services: design During Construction preparation Of Operation And Maintenance Manuals providing Technical Assistance – Responding To Requests For Information (rfis) design Build Conformance Reviews shop Drawing Review – Review Of Shop Drawings And Submittals conduct Site Visits commissioning/enhanced Commissioning; Fit-up Design Support project Start-up – Coordinate With Contractors To Start Up And Conduct Performance Tests Of The Constructed Project. projects Designed Under These Contracts May Require Designers To Obtain Security Clearances As Well As Having Physical Security Measures In Place Before A Firm Can Do The Work. Security Clearances Are Not Required At The Time Of Selection Or Award Of A Contract. 3. Selection Criteria: primary Selection Criteria: the Selection Criteria Are Listed Below In Descending Order Of Importance (first By Major Criterion And Then By Each Sub-criterion). criteria A Through E Are Primary Selection Criteria. criteria F Through H Are Secondary Selection Criteria And Will Only Be Used As Tiebreakers Among Technically Equal Firms. the Firm Is Required To Have The Following Specific Design Capabilities: a. Specialized Experience And Technical Competence In: submit At Least Five (5) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Building (whole And/or Partial) Renovation Design That Includes At Least Five (5) Of The Following Design Elements As A Substantial Part Of The Design (replacement Of Architectural Elements, Interior Re-configuration, Building Seismic Upgrade, Anti-terrorism/force Protection Upgrades, Mechanical Systems, Hvac Systems, Electrical Upgrades, Fire Protection/detection Systems, Exterior Envelope Upgrades Including Roof, Windows And Walls, Asbestos And Lead Abatement.). The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Three (3) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Infrastructure Type Design That Includes At Least Three (3) Of The Following Design Elements As A Substantial Part Of The Design. The Ae Shall Demonstrate Experience In Planning, Designing And Preparing 100% Construction Bid Documents. Projects May Include The Following Project Types (each Example Project Shall Represent A Different Project Type): Road/parking Replacement/repairs, Utility Infrastructure Replacement/repairs, Utility Central Plant Upgrades/repairs, And Retaining Wall Upgrades/repairs. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of At Least $5m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Two (2) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Design Of New Facilities. The Ae Shall Demonstrate Experience In Sustainable Design Using An Integrated Design Approach And Emphasizing Environmental Stewardship, With Experience In Energy And Water Conservation And Efficiency; And Employing The Leed Evaluation And Certification Methods. The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. the Above Requested Projects Shall Also Demonstrate The A/e’s Abilities With All Of The Following: - Planning And Scheduling Management Of Fast Track Designs, - Working On Military Installation Projects, - Prepare Cost Estimates Using Mii And Paces, (the Cost Estimator And/or The Subcontractor Should Demonstrate Familiarity With The Changing Dynamics Of The Current Construction Market In The Tri-state New York Area With Particular Emphasis On The Southern New Jersey), - Preparing Drawings In Autocad And Autocad Revit, - Experience In The Ability To Provide A Qa/qc Plan Indicating How The Prime Plans To Manage Their Team To Ensure That Quality Products Are Prepared. Demonstrate Ability To Produce Quality Designs. Evaluation Will Be Based On The Firm's Design Quality Management Plan (dqmp) And Will Consider The Management Approach, Coordination Of Disciplines, Management Of Subcontractors And Quality Control Procedures. on All Ten (10) Example Projects, The Government May Consider The Following Strengths For Evaluation Purposes: projects Demonstrating Experience Working At Military Installations Within Nan Boundaries. projects Demonstrating Experience Working With Nydec And Njdep In Obtaining Environmental Permits. projects Demonstrating Experience With Sustainable Design And Achieving Leed Silver Or Better. projects Demonstrating Experience Working Mcaces Paces And Pax/dd1391. projects Demonstrating Experience With Fast-tracked Designs. projects Demonstrating Experience Utilizing A Design Quality Control Plan projects Demonstrating Experience In Permitting, Real Estate Actions, Nepa Documentation, And Other Agency Coordination Tasks. b. Qualified Registered Professional Personnel In The Following Key Disciplines: project Manager (p.e. Or R.a. Required) quality Assurance Manager (p.e. Or R.a. Required) architecture (r.a. Required) structural Engineering (p.e. Required) civil Engineering (p.e. Required) mechanical Engineering (p.e. Required) electrical Engineering (p.e. Required) fire Protection Engineering (p.e. Required) landscape Architect (r.la. Required) cost Engineering (p.e. Required. Those With Ccp/cpe Certification Will Be Considered A Strength) geotechnical Engineering (p.e. Required) certified Industrial Hygienist (cih Required) licensed Interior Designer (ncid Required) land Surveyor (p.l.s. Required) anti-terrorism/force Protection Specialist (p.e. Required) blast/explosives Safety Engineering (p.e. Required) industrial Engineering (p.e. Required) industrial/process Engineer (p.e. Required) lean-six Sigma Professional historic Preservationist environmental Engineering (p.e. Required) lead Commissioning Specialist (p.e And At Least One Of The Following: A Nebb Qualified Systems Commissioning Administrator (sca); Acg Certified Commissioning Authority (cxa); Icb/tabb Certified Commissioning Supervisor; Bca Certified Commissioning Professional (ccp); Aee Certified Building Commissioning Professional (cbcp); University Of Wisconsin-madison Qualified Commissioning Process Provider (qcxp); Ashrae Commissioning Process Management Professional (cpmp)) certified Value Specialist (cvs Required) telecommunications Engineering (rccd Required) master Planner (p.e. Or R.a. Required) the Evaluations Will Consider Education, Training, Registration, Voluntary Certificates, Overall And Relevant Experience, And Longevity With The Firm Using Information From Section E Of The Sf 330. The Sf 330 Includes A Matrix In Section G Showing Experience Of The Proposed Lead Designers On The Projects Listed In Section F Of The Sf 330. senior Project Personnel For Each Discipline Are Required To Be Licensed And/or Registered. additional Disciplines May Be Submitted As Required By The Ae For This Type/size Project And Will Be Evaluated As The Above. fire Protection Engineering: The Services And Qualifications Of Fire Protection Engineers Are Shown In Section 1.6 Of Ufc 3-600-01, And Are Reiterated Here: A Qualified Fire Protection Engineer Shall Be An Integral Part Of The Design As It Relates To Fire Protection. This Includes, But Is Not Limited To, Building Code Analysis, Life Safety Code Analysis, Design Of Automatic Detection And Suppression Systems, Water Supply Analysis, And A Multi-discipline Review Of The Entire Project. For The Purposes Of Meeting This Requirement A Qualified Fire Protection Engineer Is Defined As An Individual Meeting One Of The Following Conditions: i.) A Registered Professional Engineer (p.e.) Having A Bachelor Of Science Or Master Of Science Degree In Fire Protection Engineering, From An Accredited University Engineering Program, Plus A Minimum Of 5 Years’ Work Experience In Fire Protection Engineering. ii.) A Registered Professional Engineer (p.e.) Who Has Passed The National Council Of Examiners For Engineering And Surveys (ncees) Fire Protection Engineering Written examination. iii.) A Registered Professional Engineer (p.e.) In A Related Engineering Discipline With A Minimum Of 5 Years’ Experience, Dedicated To Fire Protection Engineering That Can Be Verified With Documentation. the Ae And Their Subconsultants Must Be A U.s. Company(ies). The Ae’s Team Must Use Only U.s. Citizens Or U.s. Persons (an Individual Who Has Been Lawfully Admitted For Permanent Residence As Defined In 8 U.s.c. § 1101(a)(20) Or Who Is A Protected Individual As Defined By Title 8 U.s.c. § 1324b (a)(3)). The A-e’s Team Must Be Able To Obtain Visitor Registration Documents/passes To Access Any Military Base And/or Federal Facility Under This Contract. c. Past Performance On Dod And Other Contracts With Respect To Cost Control, Quality Of Work And Compliance With Performance Schedules, As Determined From References, Other Sources And Cpars. Letters Of Recommendation From Customers Addressing Your Firm’s Cost Control, Quality Of Work And Schedule Compliance Capabilities May Be Included In Section H Of The Sf 330. Letters Should Be For Projects Of A Similar Nature And Shall Be No Older Than Three Years To Be Considered. d. Capacity To Initiate Work And Complete Within The Time Parameters Of The Project. The Evaluation Will Consider The Availability Of An Adequate Number Of Personnel In All Key Disciplines. The Evaluation Will Review Part Ii Of The Sf330 To Evaluate The Overall Capacity Of The Team. Include A Part Ii Form Of The Sf 330 For Each Firm And Each Office Of Each Firm That Is Part Of The Proposed Team. e. Knowledge Of The Locality In The General Geographical Area Of Ny District Boundaries. The Evaluators Will Review Projects Identified In Section F, The Specific Experience Of The Listed Key Discipline In Section E And Additional Information In Section H In Order Of Preference. secondary Selection Criteria: f. Geographic Proximity In Relation To Ny District Boundaries. g. Volume Of Work Previously Awarded To The Firm By The Department Of Defense, With The Object Of Effecting An Equitable Distribution Among Qualified A/e Firms, Including Small Business, Veteran-owned Small Business, Service-disabled Small Business, Hubzone Small Business, Small Disadvantaged Small Business And Woman-owned Small Business And Minority Institutions And Firms That Have Not Had Prior Dod Contracts. 4. Submission Requirements: interested Prime Firms Having The Capabilities To Perform These Services Must Submit Their Sf330 To Stephen Dibari By Email Stephen.dibari@usace.army.mil Maximum File Size Is 25 Mb If Overall Sf330 Is Larger Than 25 Mb, Please Break Up The File Into Smaller Separate Files. no Hard Copies Of Sf-330’s Will Be Required. Do Not Mail Sf-330’s (cd Or Hard Copies) To The Contract Specialist Nor To Stephen Dibari At 26 Federal Plaza. Doing So, Will Delay The Ae Selection/award Process. the Sf 330 Can Be Found By Searching For Sf330 On The Following Gsa Website: Https://www.gsa.gov/forms the Forms Can Be Downloaded In A .pdf File Type. Total Submittal Page Limitation Is 85 Pages. Section E Is Limited To 50 Pages. Section F Is Limited To 10 Pages (1 Page Per Project). Each Page Shall Be Numbered. Section Dividers, Front And Back Covers, Cover Letter And Part Ii Of The Sf 330 Don’t Count Towards Overall Page Limit. Tabloid Size Paper 11” X 17” Pages For Organizational Chart Or Other Graphics Will Count As One Page. Submittals Not Following These Instructions, May Not Be Evaluated By The Board. supplemental Information On The Sf 330 Is Posted On The Ny District Usace Website: Https://www.nan.usace.army.mil/business-with-us/engineering-division/ submittals Will Not Be Accepted After 2:00 Pm On The Response Date Shown In The Advertisement In The Https://sam.gov/. If The Response Date Falls On A Saturday, Sunday, Or A Federal Holiday, The Response Date Will Move To The Next Business Day. for Questions Regarding This Contract, Contact Stephen.dibari@usace.army.mil if A Pre-selection Meeting Is Required, Notifications Will Not Be Sent After Approval Of The Pre-selection. Notification Of All Firms Will Be Made Within Ten (10) Calendar Days After Selection Approval. In Addition To The Two (2) Items Listed Above, The Remaining Info On Release Of Information On Firm Selection Shall Be In Accordance With Uai Subpart 5.4 (usace Acquisition Instructions). interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project. firms Must Be Registered In The Following: Https://www.sam.gov/ naics Code’s Are 541330 And 541310. interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project.

Download

VETERANS AFFAIRS, DEPARTMENT OF USA Tender

Food Products

United States

Closing Soon13 Jan 2025

Tender AmountRefer Documents

Description: This Request For Information (rfi) /â sources Sought Notice Is Issuedâ Solely For Information And Planning Purposes. This Is Not A Solicitation. submission Of Information About Pricing, Delivery, The Market, And Capabilities Is Highly Encouraged And Allowed Under This Rfi For Planning Purposes In Accordance With (iaw) Far 15.201(e). disclaimer this Rfi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. sources Sought/rfi Description this Is Not A Solicitation Announcement. This Is A Sources Sought Notice / Rfi Only. The Purpose Of This Sources Sought Notice / Rfi Is To Gain Information About Potential Qualified Sources And Their Size Classification Relative To Naics 311991 (size Standard Of 700 Employees). Responses To This Sources Sought Notice / Rfi Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Notice / Rfi, Further Rfis And/or A Solicitation Or Other Announcements May Be Published. the Department Of Veterans Affairs (va) Is Seeking Sources Capable Of Providing Freshly Prepared Sandwiches In Accordance With Statement Of Work Stated Below. statement Of Work: scope Of Work the Contractor Shall Delivery Fresh Food Products To The Va San Diego Healthcare System (vasdhs) Address Listed Below. Orders Shall Be Placed On An As Needed Basis, In Accordance With Delivery Schedules Listed In The Statement Of Work (sow), By The Point Of Contact (poc). Orders Shall Be Placed By Telephone, In Writing, In Writing Via Fax, E-mail, Via Online Ordering System, Or Given To Contractor Personnel As Mutually Agreed Upon Between The Facility Poc And Contractor. period Of Performance the Awarded Contract Will Be For A Base Year (12-month) Purchase Order With A Period Of Performance Of 2/1/2025 To 1/31/2026. place Of Performance va San Diego Healthcare System nutrition And Food Services; bldg 1, Main Kitchen, Room 125b, delivered Through Loading Dock 3350 La Jolla Village Drive san Diego, Ca 92161 description Of Services/supplies orders the Contractor Shall Purchase And Provide All Food Supplies (listed In The Schedule Of Materials) And Deliver To The Vasdhs. specifications the Contractor Shall Provide The Following, But Not Limited To: all Ready-to-eat Food Shall Be Packed In Food Grade Containers/package, In A Temperature-controlled Atmosphere, Refrigerated And Placed In A Sealed Container. No Preservatives Shall Be Added. ready To Eat Food Shall Comply With The Following Product Definitions: triangle Sandwich: 2 Slices Of Bread, Filling As Indicated, No Condiments, Cut Crosswise And Packed In Sealed Food Grade Containers. premium Sandwich Is A Sandwich Other Than A Triangle Sandwich. It May Be On Special Types Of Bread (such As Rolls Or Ciabatta), A Wrap, Or A Pita. Packed In Sealed Food Grade Containers/package soft Triangle Sandwiches Will Not Contain Raw Vegetables Larger Than Â¼ Inch In Size, Including Lettuce, Tomato, Celery, Or Onion. Other Triangle Sandwiches May Contain Lettuce And Tomato. triangle Sandwiches There Must At Least 2 Soft Varieties Available On White Bread. see Specific Requirements Section For Varieties Of Sandwiches Required. unopened Food Items Must Be Guaranteed To Remain In A Fresh Condition For At Least Five (5) Days After Delivery. All Ready-to-eat Food Items Are To Be Date Labeled With A Five (5) Day Expiration Date. sandwich Bread Must Not Be Wet Or Soggy For At Least 5 Days After Delivery. produce In The Sandwich Must Be In Fresh, Crisp Condition For At Least 5 Days After Delivery. all Products Shall Be Prepared And Packaged Under Modern Sanitary Conditions In Accordance With Commercial Practices And Shall Be Adequately Packed To Prevent Damage During Shipping And Handling And Storage. contents Of A Specific Sandwich Variety Should Remain Constant Throughout The Contract Period. It Is Not Acceptable To Change The Type Of Meat, Vegetables, Or Other Sandwich Fillings In A Specific Sandwich Variety Without Approval From The Purchasing Party. regulatory Standards the Contractor Is Responsible For Maintaining All Health Codes And Standards Of Sanitation And Safety In The Storage, Handling, Preparation, Transportation And Delivery Of Food As Enacted By The United States Food And Drug Administration And State Or Local Regulations. the Contractor At His/her Own Expense Shall Maintain All Federal, State, And Local Licenses And Permits Required For The Operation Of Food Services And Products Provided Herein. the Contractor Shall Provide Its Staff With On-going Training In Food Handling And Preparation, Sanitation And Safety Procedures And Food Serving Procedures. the Contractor Shall Remove All Food Servers/handlers Found Or Suspected To Be Suffering From A Communicable Disease, Disorder, Or Respiratory Problem From The Performance Under This Contract. the Contractor Shall Ensure That All Contract Staff Assigned To This Contract Are Tested Annually For Tuberculosis. Results Of All Tests Shall Be Provided To The Contracting Officer Upon Contract Award And Each Option Year Before Contract Award. All Replacement Staff Shall Be Tested For Tuberculosis And Results Shall Be Sent To The Contracting Officer Within Ten Days Of Employment. food Preparation Center (fpc) And Equipment the Contractor Food Preparation Center (fpc) Shall Conform To The Guidelines Established By Applicable State Local Requirements. The Sanitary Inspection Rates Of The Kitchen Facility Must Be 90 Percent Or Above. the Fpc Shall Have Waterproof Painted Walls, Flooring Shall Be Smooth And Of Durable Construction Of Non-absorbent Material, Shall Have Clean Equipment; And A Separate Preparation Are For Clinical Diets. In Addition, The Fpc Shall Be Free From Pests And Vermin With Adequate Space For Storage And Stock Rotation Of Refrigerated And Dry Goods. the Fpc Shall Also Contain Hot And Cold Running Water, Separate Handwashing Sinks, Security Protocols And Other Nationally Recognized Manuals On Diets And Emergency Food Services Plans. food Service Equipment Purchased Shall Meet The American National Standards Institute (ansi) Standards For Sanitation And Safety And Be Certified Or Listed By A Nationally Recognized Testing Agency. food Storage Requirements the Contractor Shall Store Perishable Food Items At Proper Temperatures To Prevent Spoilage And Other Bacterial Action. Perishables Must Be Stored At Or Below 41 Degrees Fahrenheit And Frozen Foods Must Be Maintained At Or Below 0 Degrees Fahrenheit. Shelf Stable Foods Must Be Stored Between 50 Degrees Fahrenheit And 70 Degrees Fahrenheit. food Not Subject To Further Washing Or Cooking Before Serving Shall Be Stored In A Way That Protects Against Bacterial Cross-contamination From Foods Requiring Washing Or Cooking. orders the Point Of Contact (poc) Shall Place Orders On An As Needed Basis From The Schedule Of Supplies. Orders Shall Be Placed By Telephone, In Writing, Web Based Order, Email, Via Online Ordering System, Or Given To Contractor Personnel As Mutually Agreed Between The Poc And The Contractor. The Contractor Shall Not Substitute An Item And Will Not Increase Or Decrease Quantities Ordered Without Prior Approval From The Poc. delivery Requirements deliveries Shall Be Made To The Kitchen Receiving Area Unless Otherwise Directed By The Poc. deliveries Shall Be Made Of Specified Items In Specified Quantities. Contractor Shall Receive A Minimum Of One Working Day Advance Notice Of Changes Needed For Specified Items. deliveries Shall Be Made Mondays And Wednesdays, Except Holidays, Between The Hours Of 5:30 A.m. And 6:30 A.m. Pst, No Exceptions. deliveries Shall Be Made In A Temperature Controlled Refrigerated Vehicle Capable Of Maintaining Temperatures Between 35 Degrees 41 Degrees Fahrenheit. off-loading Of Product Shall Occur In The Presence Of Va Authorized Receiving Personnel Only. product Availability if The Products Under This Contract Become Unavailable, The Contractor Shall Notify The Government In Time To Change The Order For The Specified Delivery Date. the Government Reserves The Right To Procure Services From An Alternate Source, Until Routine Services Are Restored By The Contractor. When The Government Exercises Its Right To Procure These Services From An Alternate Source, The Contractor Shall Reimburse The Government For All Charges In Excess Of The Amount That Would Have Normal Been Incurred By The Contract. furthermore, Failure To Perform Any Of The Services Set Forth In This Contract Shall Be Considered Grounds For Invoking Provisions Of Default Under Clause 52.212-4(m) Termination For Cause . inspections delivered Goods: The Government Reserves The Right To Inspect Delivered Goods For Compliance Of Specifications, Including, But Not Limited To, Correct Product(s) And Quantities, Proper Packaging, Damaged Goods, Etc. any Items Determined Unacceptable Shall Be Refused For Full Credit/replacement, At The Discretion Of The Government. Replacement Of Rejected Products Shall Be Delivered The Same Day No Later Than 1:00 P.m., Unless Otherwise Specified By The Poc. delivery Vehicles: The Government Further Reserves The Right To Enter And Inspect Any Vehicle Used To Deliver Goods For, But Not Limited To, Compliance Of Sanitation Conditions, Proper Refrigeration, Etc. Such Inspection Shall Be Made On A Random Basis. contractor Facilities: The Government May, Prior To Contract Award Or At Any Time During The Term Of The Contract, Inspect The Contractor S Plant, Personnel, Equipment, And Processes To Determine Compliance With State/federal Sanitation Regulatory Requirements. radius Requirement the Contractors Distribution Facilities Must Be Located Within An 80-mile Radius Of The Va San Diego Medical Center To Maintain Delivered Sandwiches Freshness. emergency/contingency Plan: the Contractor Shall Submit An Emergency Plan For The Provision Of Food Services To The Contracting Officer With 15 Working Days Of Contract Award. This Emergency Plan Shall Include Details On How The Contractor Will Continue To Perform This Contract Under Emergency Circumstances Such As Inclement Weather, Lack Of Water, Lack Of Electricity, Lack Of Qualified Personnel, Insufficient Quantity Of Food Items, Transportation Problems, Etc. Or The Closing Of Its Facility By The Department Of Health. contractor Delivery Personnel: all Contractor Delivery Personnel Shall Be Required To Wear A Company Uniform, Which Clearly Displays The Name Of The Company And The Individual, And Shall Be Of A Neat, Clean Appearance. the Government Reserves The Right To Accept Or Reject Contractor S Staff For The Rendering Of Services. Complaints Concerning Contract Personnel S Performance Or Conduct Shall Be Dealt With The Contactor And Poc With The Final Decision Being Made By The Contracting Officer. personnel Policy: The Contractor Shall Be Responsible For Protecting Their Personnel By Providing Employee Services Under This Contract. To Carry Out This Responsibility, The Contractor Shall Provide The Following For Their Personnel: the Contractor Agrees To Procure And Maintain Workers Compensation And Employee S Public Liability Insurance In Accordance With The Laws Of The Governing State. public Liability Insurance: The Contractor Shall Comply With All Applicable Federal And State Laws Regarding Liability For The Injury Or Death Of An Employee In Performing The Work; Under This Contract And Shall Hold The Government Harmless Against Any Or All Loss, Cost, Damage, Claim Expense Or Liability For Accident Or Injury To Persons Or Property Occurring In The Performance Of This Contract. Before Commencing Work Under This Contract, The Contractor Shall Furnish An Insurance Certificate Indicating Coverage Has Been Obtained. The Contracting Officer May Waive The Requirement If He Determines That Insurance Certifications Now On File Are Acceptable, However, New Certifications Shall Be Furnished Prior To The Expiration Date. the Contractor Shall Follow All Existing Local, State, Federal And/or Union Laws/regulations Relevant To Fringe Benefits And Premium Pay For Their Employees. Such Personnel Shall Not Be Considered Va Employees For Any Purpose. The Contracting Officer Or His/her Designee Shall Notify The Contractor Of Any Noncompliance With The Foregoing Provisions And The Action To Be Taken. After Receipt Of Such Notice, The Contractor Shall Immediately Correct The Conditions To Which Attention Has Been Directed. Such Notice, When Served The Contractor Or His/her Representative At The Site Of Work, Shall Be Deemed Sufficient Of The Purposes Aforesaid. If The Contractor Fails Or Refuses To Comply Promptly, The Contracting Officer May Issue A Stop-work Order For All Or Any Part Of The Work And Hold The Contractor In Default As Provided Elsewhere In This Contract. changes only Those Services Specified Herein Are Authorized. Before Performing Any Service Of A Noncontract Nature, The Contractor Shall Advise The Contracting Officer Of The Reasons For The Additional Work. Changes To The Resulting Contract Are Not Authorized, Unless In Writing By The Contracting Officer And Are In Accordance With Far Clause 52.212-4(c) Changes. badges And Parking contractor Personnel Are Required To Wear Identification (i.d.) Badges Issued By The Va Security Office During The Entire Time They Are On The Va Healthcare System Grounds. It Is The Responsibility Of The Contractor S Personnel To Park In The Appropriate Designated Parking Areas. Parking Information Is Available From The Va Healthcare System Security Office. The Va Healthcare System Shall Not Validate Or Reimburse For Parking Violations Under Any Circumstance. overtime And Holidays any Overtime And/or Holiday Pay That May Be Entitled To The Contractor S Employees Shall Be The Sole Responsibility Of The Contractor And Shall Not Be Billed To Nor Reimbursed By The Government. national Holidays: Listed Below Are The Eleven Established Federal Holidays: new Year S Day January 1 martin Luther King S Birthday Third Monday In January president S Day Third Monday In February memorial Day Last Monday In May juneteenth- June 19 independence Day July 4 labor Day First Monday In September columbus Day Second Monday In October veterans Day November 11 thanksgiving Day Fourth Thursday In November christmas Day December 25 when One Of The Holidays Falls On Sunday, The Following Monday Shall Be Observed As A National Holiday. When A Holiday Falls On A Saturday, The Preceding Friday Is Observed As A National Holiday By U.s. Government Agencies. Also Included Would Be Any Day Specifically Declared By The President Of The United States Of America As A National Holiday. specific Requirements: estimated Quantities Are Shown Below. sandwich Description estimated Quantity unit Of Measure roast Beef, Lettuce, & Tomato Wedge (on Wheat) 3 Ounces Or More Roast Beef, Sliced At Least 1.5 Millimeters Thick 50 ea turkey, Lettuce & Tomato Wedge (on Wheat) 3 Ounces Or More Turkey, Sliced At Least 1.5 Millimeters Thick 11,000 ea vegetarian Wedge (garlic Hummus & Cucumber On Dark Wheat) 1 Ounce Or More Vegetarian Protein Source 25 ea peanut Butter/strawberry Jelly On Wheat Triangle 50 ea egg Salad On Wheat Triangle 3 Ounces Or More Of Egg Salad 50 ea chicken Salad On Wheat Triangle 3 Ounces Or More Of Chicken Salad 50 ea tuna Salad On Wheat Triangle 3 Ounces Or More Tuna Salad Made With Albacore Tuna Meat 4,200 ea chicken Salad On White Triangle 3 Ounces Or More Of Chicken Salad 50 ea egg Salad On White Triangle 3 Ounces Or More Of Egg Salad 3,600 ea the List Of Draft Characteristics Is Intended To Be Descriptive, Not Restrictive, Of The Supplies/services That Are Required. if Your Company Is Interested And Capable Of Providing The Required Supplies/services, Please Provide The Information Indicated Below. Response To This Notice Should Include Company Name, Address, Point Of Contact, Size Of Business Pursuant To The Following Questions: (1) Submit Your Capabilities Statement Illustrating How Your Organization Can/cannot Meet The List Of Sow Requirements. For Instances Where Your Company Cannot Meet The Sow Requirement(s), Please Explain. For Instances Where Your Company Can Meet The Sow Requirement(s), Please Show How Your Company Meets/exceeds Each Requirement. (2) Please Review The List Of Sow Requirements And Provide Any Additional Feedback Or Suggestions. If None, Please Reply As N/a. (3) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran-owned Small Business (sdvosb), Veteran-owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc. (4) Is Your Company Considered Small Under The Naics Code Identified In This Rfi? (5) Are You The Manufacturer, Authorized Distributor, And/or Can Your Company Provide A Solution To The Required Supplies/services Described In The List Of Sow? (6) If You Are A Large Business, Do You Have Any Designated/authorized Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (7) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified. (8) Limitations On Subcontracting: How Does Your Business Ensure Compliance With The Limitations On Subcontracting As Outlined In 13 Cfr Â§ 125.6? (9) Are The Items You Are Identifying/providing Considered Commercial Of The Shelf (cots) Items As Defined In Far Part 2.101 Under Commercial Items? (10) Non-manufacturer Rule: If Applicable, Can You Confirm Your Business Complies With The Non-manufacturer Rule? Specifically, Does Your Company: Provide A Product From A Small Business Manufacturer Or Processor? Not Exceed 500 Employees? Primarily Engage In The Retail Or Wholesale Trade And Normally Sell The Type Of Item Being Supplied? Take Ownership Or Possession Of The Item(s) With Its Personnel, Equipment Or Facilities In A Manner Consistent With Industry Practice? (11) Please Indicate Whether Your Product Conforms To The Requirements Of The Buy American Act? (12) What Is Your Lead Time To Deliver A Single Unit With All Components? Is There Scale In Lead Time With Greater Quantities? Please Elaborate. (13) What Is Estimated Life Span Of Your Solution? What Support/services Does That Entail? (14) Does Your Proposed Equipment Have Fda Clearance? Please Specify What Fda Clearance(s) Have Been Obtained. (15) Does Your Organization Offer A Leasing Solution? Please Elaborate. (16) Does Your Company Have A Federal Supply Schedule (fss) Gsa/nac/sac/bpa/nasa Sewp Or Any Other Federal Government Contract? If So, Please Provide The Contract Number(s). (17) If You Are An Fss Gsa/nac/sac/bpa/nasa Sewp Or Any Other Federal Government Contract Holder, Are All The Items/solutions You Are Providing Information About Available On Your Schedule/contract? Please State If All Or Some Items Are Available On The Contract. (18) General Pricing Of Your Products/solution Is Encouraged. Pricing Will Be Used For The Purpose Of Market Research Only. It Will Not Be Used To Evaluate For Any Type Of Award. (19) Please Provide Your Sam.gov Unique Entity Id/cage Code Number. responses To This Notice Shall Be Submitted Via Email To Hestia.sim@va.gov. Telephone Responses Will Not Be Accepted. Responses Must Be Received No Later Than Monday, January 13, 2025 By 10:00 Am Pacific Local Time. all Responses To This Sources Sought/rfi Will Be Used For Planning Purposes Only. Responses To This Sources Sought Notice / Rfi Are Not Considered A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation. If Further Rfis And/or A Solicitation Or Other Announcement Is Issued As A Result Of The Information Provided From This Rfi, All Interested Parties Must Respond To The Specific Posting Separately Iaw The Specifications Of That Announcement.

Download

National Irrigation Administration Tender

Philippines

Closing Date20 Jan 2025

Tender AmountPHP 1 Million (USD 18.4 K)

Details: Description Invitation To Bid For Supply & Delivery Of Construction Materials For Quiniput Cis The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-repaircis2025-012 (goods) Project Name : Quiniput Cis Contract Location : Quiniput, Zamboanga City Scope Of Works : Supply & Delivery Of Construction Materials Approved Budget For The Contract (abc) : Php 1,068,251.36 Contract Duration : 60 Calendar Days Amount Of Bidding Documents : Php 5,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 25% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : December 21, 2024 – January 20, 2025 At 8:30 Am Pre-bid Conference : January 8, 2025 At 9:00 Am Submission Of Bids : January 20, 2025 At 8:30 Am Opening Of Bids : January 20, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting December 21, 2024 – January 20, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/juh-znyf-mbg Opening Of Bids : Https://meet.google.com/kwm-bvjs-ems Item No. Description Quantity Unit Total Delivered, Weeks/months 1 Nipa Roof 500.00 Pc 500.00 1st Month 2 Straw Rope 5.00 Roll 5.00 1st Month 3 Ordinary Water Closet 1.00 Unit 1.00 1st Month 4 4'' Pvc Pipe 1.00 Pc 1.00 1st Month 5 Bamboo Bulk 76.00 Pc 76.00 1st Month 6 Safety Protective Foot Ware Waterproof Rubber Boots (heavy Duty) 25.00 Pc 25.00 1st Month 7 Rubber Palm Construction Gloves 25.00 Pc 25.00 1st Month 8 Construction Long Sleeves 25.00 Pc 25.00 1st Month 9 Amakan 40.00 Sheet 40.00 1st Month 10 Portland Cement 372.00 Bag 743.00 1st Month 371.00 2nd Month 11 Fine Sand 48.00 Cu.m 48.00 1st Month 12 Round Head Shovel (steel Handle-heavy Duty) 4.00 Pc 4.00 1st Month 13 Gravel (3/4 Ø) 96.00 Cu.m 96.00 1st Month 14 10mm Ø X 6m Rsb (grade 40) 627.00 Pc 1,253.00 1st Month 626.00 2nd Month 15 #16 G. I. Tie Wire 88.00 Kg 88.00 1st Month 16 Marine Plywood (0.0125m X 1.2m X 2.44m) 80.00 Pc 159.00 1st Month 79.00 2nd Month 17 Lumber Coco 2"x 2" X 12' 1,150.00 Bd.ft 1,150.00 1st Month 18 Lumber Coco 3"x 2" X 12' 1,700.00 Bd.ft 1,700.00 1st Month 19 C. W. Nails #2 80.00 Kg 80.00 1st Month 20 C. W. Nails #3 60.00 Kg 60.00 1st Month

Download

401-410 of 423 active Tenders

Waterproofing Tenders

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS