VETERANS AFFAIRS, DEPARTMENT OF USA Tender

Page 2 Of 2 request For Quote (rfq) #: 36c25925q0119 ophthalmic Exam Chairs And Slit Lamp Instrument Stands Salt Lake City Va Medical Center this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. The Government Reserves The Right To Make No Award From This Solicitation. * The Deadline For All Questions Is 12:00pm Mst, January 29th, 2025. all Questions Must Be Submitted In Writing No Later Than The Question Cut-off Date Marked Above. All Questions Will Be Answered Officially Through An Amendment To The Solicitation. ** Quotes Are To Be Provided To Stephanie.cahill@va.gov No Later Than 12:00pm Mst, January 31st, 2025. quotes Shall Not Be Hand Carried. Faxed Quotes Shall Not Be Accepted. Emailed Quotes Are The Only Method Of Submitted Quotes (4mb Email Limit). The Government Reserves The Right To Make Award Solely On Initial Quotes Received. Offerors Bear The Burden Of Ensuring That All Portions Of The Offer (and Any Authorized Amendments) Reach The Designated Office Before The Deadline Specified In The Solicitation. This Rfq Shall Be Completed In Its Entirety, And Signed And Dated, Failure Shall Not Be Considered For Award. this Is A Request For Quote (rfq) And The Solicitation Number Is 36c25925q0119. The Government Anticipates Awarding A Firm-fixed Price Contract Resulting From This Solicitation. this Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-07 Effective August 29, 2024. the North American Industrial Classification System (naics) Code For This Procurement Is 339115 With A Small Business Size Standard Of 1,000 Employees. This Solicitation Is A 100% Set-aside For Small Business Concerns. list Of Line Items; line Item description quantity unit Of Measure unit Price total Price 0001 ophthalmic Exam Chair 6 ea $ $ 0002 ophthalmic Floor Stand For Slit Lamp 6 ea 0003 installation 1 jb grand Total $ description Of Requirements For The Items To Be Acquired: *buy American Vendors Are Encouraged To Include Quotes With Products Manufactured Within The U.s. Whenever Possible Although Bids With Non-domestic Products Will Not Be Excluded From The Evaluation. vendors Are Required To Complete The 52.225-2 Buy American Certificate Below And Include With Their Quotation In Order To Verify The Country Of Origin (coo) Of Products Included In Their Quotes. *fob Shall Be Destination *freight Shall Be Added To The Price Of Clin 0001 And Not Be Its Own Line Item *cut Sheets And Specification Sheets Proving The Offered Product Meets All Testing Specifications And Salient Characteristics Shall Be Included With The Quote *quotes Shall Annotate The Expected Date Of Delivery To The Specified Location *quotes Shall Be Accompanied By An Authorized Distributor Letter From The Manufacturer Of The Items Being Offered. *failure To Meet The Salient Characteristics Below Will Result In The Offeror S Quote Not Being Considered For Award. *failure To Provide Product Information Documents, Quote With Accurate Costs, Delivery Lead Time, Buy American Certificate, Or Authorized Distributor Letter Will Result In The Offeror S Quote Not Being Considered For Award. salient Characteristics: ophthalmic Patient Exam Chairs chair Must Be Able To Rotate At Least 270 Degrees. chair Must Be Able To Accommodate At Least 300 Pounds. chair Must Have A Minimum Ground To Seat Height Of At Least 20 Inches. chair Must Be Able To Raise The Patient At Least 30 Inches From The Ground. chair Back Must Be Able To Be Reclined At Least 80 Degrees. chair Needs To Have Controls On Either Side Of The Chair To Control Height And Reclining Positions For Doctor Access. chair Must Have Foot Pedal Included To Control Height And Reclining Positions. chair Needs To Be Compatible With A Chair Mover (or Glider) To Accommodate Patients In Wheelchairs Who Cannot Transfer To The Ophthalmic Exam Chair. chair Must Have An Easy To Operate Headrest For Patient Head Positioning. chair Must Have Arms Rests That Can Be Raised And Lowered. slit Lamp Instrument Stand slit Lamp Arm Needs To Be Able To Support Slit Lamps Up To 60 Lbs. the Upper Refractor Arm Has A Minimum Of 10 Vertical Range, And Handle Instruments Weighing Up To 12 Lbs. stand Needs To Have Ability To Control The Height Of The Exam Chair. stand Needs To Have Designated Instrument Recharging Stations, Minimum Of Two Instruments At A Time. stand Needs To Have Built In Standard Plug Outlets On The Back Of The Unit. stand Needs To Have An Overhead Lamp On Adjustable Arm. counterbalances Built Into Slit Lamp Arm To Be Able To Easily Adjust Height Of The Slit Lamp During Examinations. stand Must Be Compatible With Exam Chairs. scope Of Work all Equipment Will Be Drop Ship To The Facility. the Vendor Will Either Provide Or Arrange For Installation Of The 12 Total Pieces Of Equipment In The Ophthalmology Department. Installation Will Be Coordinated With Biomed And The Clinic As To Not Interfere With Patient Care. there Will Be No Trade In For The Old Equipment. the C&a Requirements Do Not Apply, A Security Accreditation Package Is Not Required. delivery And Acceptance Shall Be F.o.b Destination (far 52.247-34) At The Veterans Affairs Medical Center, Located: department Of Veterans Affairs salt Lake City Va Medical Center 500 Foothill Dr. salt Lake City, Ut 84148 52.212-1, Instructions To Offerors--commercial Items Applies To This Acquisition addendum To Far 52.212-1 Instructions To Offerors Commercial gray Market Items Are Original Equipment Manufacturer S (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts) For Va Medical Centers.â  No Remanufactures Or Gray Market Items Will Be Acceptable. offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem.â  All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. the Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract.â  Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. offerors Providing An Or Equal Product(s) Must Adhere To The Terms In Far 52.211-6. If An Item In This Solicitation Is Identified As Brand Name Or Equal, The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That Equal Products Must Meet Or Exceed Are Specified In The Solicitation. To Be Considered For Award, Offers Of Equal Products, Including Equal Products Of The Brand Name Manufacturer, Must meet The Salient Physical, Functional, Or Performance Characteristic Specified In This Solicitation; clearly Identify The Item By- brand Name, If Any And make Or Model Number, include Descriptive Literature Such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To The Contracting Officer; And clearly Describe Any Modification The Offeror Plans To Make In A Product To Make It Conform To The Solicitation Requirements. Mark Any Descriptive Material To Clearly Show The Modification. the Contracting Officer Will Evaluate Equal Products On The Basis Of Information Furnished By The Offeror Or Identified In The Offer And Reasonably Available To The Contracting Officer. The Contracting Officer Is Not Responsible For Locating Or Obtaining Any Information Not Identified In The Offer. Unless The Offeror Clearly Indicates In Its Offer That The Product Being Offered Is An Equal Product, The Offeror Shall Provide The Brand Name Product Referenced In The Solicitation any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. state If Quoted Items Are Available And Priced Through Offerors Existing Government-wide Acquisition Contract (gwac), Gsa Multiple Award Schedule (mas) Contract, Or Va-wide Acquisition Contract. if The Acquisition Is Set-aside For Sdvosbs/vosbs, Their Socioeconomic Status Must Be Vip Verified And Visible In The Va Vendor Information Pages (vip): Https://www.vip.vetbiz.gov/ At The Time Of Quote Submission And Award, Or Will Be Considered Non-responsive, And Will Not Be Considered For Award. offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contactors, The Offeror Making Such Contact May Be Excluded From Award Considerations. all Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. all Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. submission Of Quote Shall Include The Following Volumes: (i) Technical Capability Or Quality Of The Item Offered To Meet The Government Requirement; (ii) Price; (iii) Delivery Lead Time; And (iv) Buy American Certificate volume I - Technical Capability Or Quality Of The Item Offered To Meet The Government Requirement the Offeror Shall Submit Specifications, Cut Sheets, Or Brochures Confirming The Equal Products, Including Equal Products Of The Brand Name Manufacturer Submitted, Meets Or Exceeds The Salient Physical, Functional, Or Performance Characteristic Specified In This Solicitation. The Product(s) Quoted Must Be Identified By Brand Name, If Any, And Make Or Model Number. volume Ii Price price - The Offeror Shall Complete The Pricing Schedule Provided In Section (v) Above: Price/cost Schedule. volume Iii Delivery Lead Time the Offeror Shall State The Required Number Of Calendar Days To Deliver The Item, To Include Installation, If Applicable. volume Iv Buy American Certificate the Offeror Shall Complete And Submit The Included 52.225-2 Buy American Certificate. (end Of Addendum To 52.212-1) 52.212-2, Evaluation--commercial Items Applies To This Acquisition addendum To Far 52.212-2 Evaluation Commercial Items: the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government Considering Price And Other Factors. the Following Factors Shall Be Used To Evaluate Quotations: factor 1. Technical Capability Or Quality Of The Item Offered To Meet The Government Requirement factor 2. Price factor 3. Delivery Lead Time factor 4. Submission Of Completed Buy American Certificate evaluation Approach. The Government Will Evaluate Quotations Using The Comparative Evaluation Process Outlined In Far 13.106-2(b)(3), Where Quotations Will Be Compared To One Another To Determine Which Provides The Best Benefit To The Government. The Government Reserves The Right To Consider A Quotation Other Than The Lowest Price That Provides Additional Benefit(s). Quotations May Exceed Minimum Requirements Of The Solicitation. The Government Reserves The Right To Select A Quotation That Provides Benefit To The Government That Exceeds The Minimum Requirements Of The Solicitation, But Is Not Required To Do So. Each Response Must Meet The Minimum Requirements Of The Solicitation. The Government Is Not Requesting Or Accepting Alternate Quotations. The Evaluation Will Consider The Following: factor 1. Technical Capability Or Quality Of The Item Offered To Meet The Government Requirement: The Quotation Will Be Evaluated To The Extent To Which It Can Meet And/or Exceed The Government S Requirements As Outlined In The Solicitation And Based On The Information Requested In The Instructions To Quoters Section Of The Solicitation. factor 2. Price: The Government Will Evaluate The Price By Adding The Total Of All Line Item Prices. The Government May Use Various Price Analysis Techniques And Procedures To Make A Price Reasonableness Determination. Offers That Do Not Meet Or Exceed The Technical Capability Or Quality Of The Item Offered To The Government Requirement Shall Not Be Selected Regardless Of Price. factor 3. Delivery Lead Time: The Government Will Evaluate Delivery Lead Time And Select The Quoter/offer Whose Delivery Lead Time Is Most Advantageous To The Government. The Government May Consider An Award To Other Than The Lowest Priced Quoter/offeror If It S In The Best Interest Of The Government. factor 4. Submission Of Completed Buy American Certificate: The Government Will Evaluate The Information Provided In The Completed Buy American Certificate. Priority Will Be Given To Products Made In The Us. (end Of Addendum To 52.212-2) 52.212-3, Offeror Representations And Certifications Commercial Items, Applies To This Acquisition. Offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. Offerors Must Be Registered In Sam At Time Of Offer Submission. 52.212-4, Contract Terms And Conditions--commercial Items Applies To This Acquisition 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders--commercial Items (jul 2020) Applies To This Acquisition far 52.212-5 Applies To This Acquisition With The Following Far Clauses Incorporated By Reference; far 52.204-10 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) far 52.204-16 commercial And Government Entity Code Reporting (aug 2020) far 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (oct 2020) far 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (jun 2020) far 52.219-6 notice Of Total Small Business Set-aside (nov 2020) far 52.219-8 utilization Of Small Business Concerns (sep 2021) far 52.219-28 post Award Small Business Program Representation (nov 2020) far 52.219-33 nonmanufacturer Rule (mar 2020) far 52.222-3 convict Labor (jun 2003) far 52.222-19 child Labor Cooperation With Authorities And Remedies (jul 2020) far 52.222-21 prohibition Of Segregated Facilities (apr 2015) far 52.222-26 equal Opportunity (sep 2016) far 52.222-35 equal Opportunity For Veterans (jun 2020) far 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) far 52.222-37 employment Reports On Veterans (jun 2020) far 52.222-40 notification Of Employee Rights Under The National Labor Relations Act (dec 2010) far 52.222-50 combating Trafficking In Persons (oct 2020) far 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) far 52.225-1 buy American Supplies (jan 2021) far 52.225-3 buy American--free Trade Agreements--israeli Trade Act (jul 2020) far 52.225-13 restrictions On Certain Foreign Purchases (jun 2008) far 52.232-33 payment By Electronic Funds Transfer System For Award Management (oct 2018) additional Contract Requirements Or Terms And Conditions: 52.217-6 Option For Increased Quantity (mar 1989) the Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Office May Exercise The Option By Written Notice To The Contractor Prior To Receipt Of All Items. Delivery Of The Added Items Shall Continue At The Same Rate As The Like Items Called For Under The Contract Unless The Parties Otherwise Agree. 52.225-1 Buy American Supplies (oct 2022) definitions. As Used In This Clause Commercially Available Off-the-shelf (cots) Item (1) Means Any Item Of Supply (including Construction Material) That Is a Commercial Product (as Defined In Paragraph (1) Of The Definition Of Commercial Product At Federal Acquisition Regulation (far) 2.101; sold In Substantial Quantities In The Commercial Marketplace; And (iii) Offered To The Government, Under A Contract Or Subcontract At Any Tier, Without Modification, In The Same Form In Which It Is Sold In The Commercial Marketplace; And does Not Include Bulk Cargo, As Defined In 46 U.s.c. 40102(4), Such As Agricultural Products And Petroleum Products. Component Means An Article, Material, Or Supply Incorporated Directly Into An End Product. Cost Of Components Means for Components Purchased By The Contractor, The Acquisition Cost, Including Transportation Costs To The Place Of Incorporation Into The End Product (whether Or Not Such Costs Are Paid To A Domestic Firm), And Any Applicable Duty (whether Or Not A Duty-free Entry Certificate Is Issued); Or for Components Manufactured By The Contractor, All Costs Associated With The Manufacture Of The Component, Including Transportation Costs As Described In Paragraph (1) Of This Definition, Plus Allocable Overhead Costs, But Excluding Profit. Cost Of Components Does Not Include Any Costs Associated With The Manufacture Of The End Product. Critical Component Means A Component That Is Mined, Produced, Or Manufactured In The United States And Deemed Critical To The U.s. Supply Chain. The List Of Critical Components Is At Far 25.105. domestic End Product Means for An End Product That Does Not Consist Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both an Unmanufactured End Product Mined Or Produced In The United States; an End Product Manufactured In The United States, If the Cost Of Its Components Mined, Produced, Or Manufactured In The United States Exceeds 60 Percent Of The Cost Of All Its Components, Except That The Percentage Will Be 65 Percent For Items Delivered In Calendar Years 2024 Through 2028 And 75 Percent For Items Delivered Starting In Calendar Year 2029. Components Of Foreign Origin Of The Same Class Or Kind As Those That The Agency Determines Are Not Mined, Produced, Or Manufactured In Sufficient And Reasonably Available Commercial Quantities Of A Satisfactory Quality Are Treated As Domestic. Components Of Unknown Origin Are Treated As Foreign. Scrap Generated, Collected, And Prepared For Processing In The United States Is Considered Domestic; Or the End Product Is A Cots Item; Or (2) For An End Product That Consists Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, An End Product Manufactured In The United States, If The Cost Of Foreign Iron And Steel Constitutes Less Than 5 Percent Of The Cost Of All The Components Used In The End Product. The Cost Of Foreign Iron And Steel Includes But Is Not Limited To The Cost Of Foreign Iron Or Steel Mill Products (such As Bar, Billet, Slab, Wire, Plate, Or Sheet), Castings, Or Forgings Utilized In The Manufacture Of The End Product And A Good Faith Estimate Of The Cost Of All Foreign Iron Or Steel Components Excluding Cots Fasteners. Iron Or Steel Components Of Unknown Origin Are Treated As Foreign. If The End Product Contains Multiple Components, The Cost Of All The Materials Used In Such End Product Is Calculated In Accordance With The Definition Of Cost Of Components . end Product Means Those Articles, Materials, And Supplies To Be Acquired Under The Contract For Public Use. fastener Means A Hardware Device That Mechanically Joins Or Affixes Two Or More Objects Together. Examples Of Fasteners Are Nuts, Bolts, Pins, Rivets, Nails, Clips, And Screws. foreign End Product Means An End Product Other Than A Domestic End Product. foreign Iron And Steel Means Iron Or Steel Products Not Produced In The United States. Produced In The United States Means That All Manufacturing Processes Of The Iron Or Steel Must Take Place In The United States, From The Initial Melting Stage Through The Application Of Coatings, Except Metallurgical Processes Involving Refinement Of Steel Additives. The Origin Of The Elements Of The Iron Or Steel Is Not Relevant To The Determination Of Whether It Is Domestic Or Foreign. predominantly Of Iron Or Steel Or A Combination Of Both Means That The Cost Of The Iron And Steel Content Exceeds 50 Percent Of The Total Cost Of All Its Components. The Cost Of Iron And Steel Is The Cost Of The Iron Or Steel Mill Products (such As Bar, Billet, Slab, Wire, Plate, Or Sheet), Castings, Or Forgings Utilized In The Manufacture Of The Product And A Good Faith Estimate Of The Cost Of Iron Or Steel Components Excluding Cots Fasteners. steel Means An Alloy That Includes At Least 50 Percent Iron, Between 0.02 And 2 Percent Carbon, And May Include Other Elements. united States Means The 50 States, The District Of Columbia, And Outlying Areas. (b) 41 U.s.c. Chapter 83, Buy American, Provides A Preference For Domestic End Products For Supplies Acquired For Use In The United States. In Accordance With 41 U.s.c. 1907, The Domestic Content Test Of The Buy American Statute Is Waived For An End Product That Is A Cots Item (see 12.505(a)(1)), Except That For An End Product That Consists Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, The Domestic Content Test Is Applied Only To The Iron And Steel Content Of The End Product, Excluding Cots Fasteners. (c) Offerors May Obtain From The Contracting Officer A List Of Foreign Articles That The Contracting Officer Will Treat As Domestic For This Contract. (d) The Contractor Shall Deliver Only Domestic End Products Except To The Extent That It Specified Delivery Of Foreign End Products In The Provision Of The Solicitation Entitled "buy American Certificate." alternate I (oct 2022). As Prescribed In 25.1101(a)(1)(ii) Substitute The Following Sentence For The First Sentence Of Paragraph (1)(ii)(a) Of The Definition Of Domestic End Product In Paragraph (a): (a) The Cost Of Its Components Mined, Produced, Or Manufactured In The United States Exceeds 50 Percent Of The Cost Of All Its Components. (end Of Clause) 52.225-2 Buy American Certificate (oct 2022) (1) The Offeror Certifies That Each End Product, Except Those Listed In Paragraph (b) Of This Provision, Is A Domestic End Product And That Each Domestic End Product Listed In Paragraph (c) Of This Provision Contains A Critical Component. (2) The Offeror Shall List As Foreign End Products Those End Products Manufactured In The United States That Do Not Qualify As Domestic End Products. For Those Foreign End Products That Do Not Consist Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, The Offeror Shall Also Indicate Whether These Foreign End Products Exceed 55 Percent Domestic Content, Except For Those That Are Cots Items. If The Percentage Of The Domestic Content Is Unknown, Select No . (3) The Offeror Shall Separately List The Line Item Numbers Of Domestic End Products That Contain A Critical Component (see Far 25.105). (4) The Terms Commercially Available Off-the-shelf (cots) Item, Critical Component, Domestic End Product, End Product, And Foreign End Product Are Defined In The Clause Of This Solicitation Entitled Buy American Supplies. Foreign End Products: line Item No. country Of Origin exceeds 55% Domestic Content (yes/no) 0001 Ophthalmic Exam Chair 0002 Ophthalmic Floor Stand For Slit Lamp 0003 Installation n/a Service n/a - Service [list As Necessary] (c) Domestic End Products Containing A Critical Component: line Item No. [list As Necessary] (d) The Government Will Evaluate Offers In Accordance With The Policies And Procedures Of Part 25 Of The Federal Acquisition Regulation. (end Of Provision) 852.212-70, Provisions And Clauses Applicable To Va Acquisition Of Commercial Items (apr 2020) vaar 852.203-70 commercial Advertising (may 2018) vaar 852.232-72 electronic Submission Of Payment Requests (nov 2018) vaar 852.233-70 protest Content/alternative Dispute Resolution (oct 2018) vaar 852.233-71 alternate Protest Procedure (oct 2018) vaar 852.246-71 rejected Goods (oct 2018) 852.252-70, Solicitation Provisions Or Clauses Incorporated By Reference (jan 2008) the Following Provisions Or Clauses Incorporated By Reference In This Solicitation Must Be Completed By The Offeror Or Prospective Contractor And Submitted With The Quotation Or Offer. Copies Of These Provisions Or Clauses Are Available On The Internet At The Web Sites Provided In The Provision At Far 52.252-1, Solicitation Provisions Incorporated By Reference, Or The Clause At Far 52.252-2, Clauses Incorporated By Reference. Copies May Also Be Obtained From The Contracting Officer. http://www.acquisition.gov/far/index.html https://www.acquisition.gov/vaar the Following Far Provisions Are To Be Incorporated By Reference: far 52.204-7 system For Award Management (oct 2018) far 52.204-16 commercial And Government Entity Code Reporting (aug 2020) far 52.211-6 brand Name Or Equal (aug 1999) far 52.229-11 tax On Certain Foreign Procurements Notice And Representation (jun 2020) the Following Far Clauses Are Incorporated By Reference: far 52.203-17 contractor Employee Whistleblower Rights And Requirement To Inform Employees Of Whistleblower Rights (jun 2020) far 52.204-13 system For Award Management Maintenance (oct 2018) far 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) far 52.232-40 providing Accelerated Payments To Small Business Subcontractors (nov 2021) the Following Vaar Clauses Are To Be Incorporated By Reference: vaar 852.212-71 gray Market Items (apr 2020) the Defense Priorities And Allocations System (dpas) Does Not Apply. date And Time Offers Are Due To Stephanie.cahill@va.gov By 12:00pm Mst, January 31st, 2025. name And Email Of The Individual To Contact For Information Regarding The Solicitation: stephanie Cahill stephanie.cahill@va.gov