Vehicle Tenders

Details: Description Item Number Description Qty Unit Estimated Budget 1 (hand Held) Portable Ultrasound Unit 2 Units 1,800,000.00 General Specification Probe Characteristics • 128 Physical Channel Beamforming • Black-and-white Mode For Displaying Anatomy In Real-time • Color-coded Overlay For Real-time Blood Flow Imaging • Harmonic Imaging For Increased Signal-to-noise Ratio And Reduced Artifacts From Side Lobes, Grating Lobes And Reverberations, Resulting In Superior Tissue Definition And Reduced Speckle Artifacts. With The Greater Penetration Of Lower Ultrasound Frequencies, High-quality Harmonic Imaging At Greater Depth Can Be Performed. • Selectable Centerline Marker • Selectable Focal Zone Marker • Selectable Tgc Control With 6 Depth-dependent Gain Controls • Total Scan Time Of 50 Minutes With Fully Charged Battery (with 80% Black And White, 20% Color Imaging) • Any Qi-compliant Wireless Charger Can Be Used To Charge Probe • Recharge Battery In 75 Minutes From 10% To 90% Battery Capacity • Dimensions: 131 X 64 X 31 Mm • Weight: 205 +/- 3 Grams • Ip67 Rated Curved Array Transducer For Deep Scanning • Specific Clinical Applications And Exam Types Include: Abdominal, Fetal/obstetrics, Gynecological, Urology, Thoracic/lung, Cardiac (adult And Pediatric, 40 Kg And Above), Vascular/peripheral Vascular, Musculoskeletal (conventional), Pediatrics, Interventional Guidance (includes Free Hand Needle/catheter Placement, Fluid Drainage, Nerve Block And Biopsy) • Broad-bandwidth Curved Array: From 2 - 5 Mhz With Center Frequency Of 3.3 Mhz • Number Of Elements: 128 • Footprint: 64 Mm X 16 Mm (lens) • Viewing Angle: 60° • Depth: Up To 24 Cm Linear Array Transducer For Shallow Scanning • Specific Clinical Applications And Exam Types Include: User Interface The Device Offers Ultrasound Imaging With A Minimized Number Of Keys And Intuitive Thumb-controllable Touchscreen User Interface. The Device App Supports Portrait As Well As Landscape Mode To Optimize Image Size And Ergonomics For Different Use Scenarios. • Single Key/gesture To Control Freeze/unfreeze, Store, Color On/off, Gain And Depth Control • 2 Steps To Change Preset With Appropriate Transducer • 2 Steps To Start Reviewing Images From An Exam • Presets With Optimized Settings For Imaging Different Organs. User- Selectable Default Preset For Immediate Use After Starting The App. • Measurements: Distance, Ellipse • Device Configuration And Management Tools In Easy Reach Through Swiping In Menu: • Enablement Of Tgc Controls, Preview Mode, Storage Of Binary Images •setting Auto Freeze Time, Video Duration • Configuration Of Probe Button Function (freeze Or Store) • Download User Manual In Selectable Language To Device App •diagnostics In Device App With Ability To Upload Lg Files To Manufacturer Server • Direct Access To Customer Support Information •link To Cloud-based Educational Materials • Information About Software Status Of Probe And App With Ability To Un- And Re-register Data Storage Patient Data Identification: • Manual Data Entry Of Patient Information For An Exam • Select From Dicom Modality Worklist On Request. Such Worklist Supports Consistent Labeling Of Images, Video Clips And Exams Before Export To Dicom Pacs. Exam Data On Device • Data For Up To 500 Exams Can Be Stored On Mobile Device • Data Is Stored In Generic Formats: Jpg For Still Frames, Mpg For Videos • Complementing Storage Of Binary Image Data Can Be Selected. Such Data Could Be Useful For Further Image Analytics In Collaboration With Manufacturer. • Data Is Organized As Individual Examinations With Collection Of Images And Can Be Linked With Patient Identification • All Stored Data Can Be Recalled For Review Data Export • Anonymized Images And Videos Can Be Shared With Other Apps Available On Smart Device • Images, Video Clips Or Exams With Or Without Patient Information Can Be Wirelessly Exported In Generic Formats (jpg, Mp4) To Shared Network Folders • Images, Video Clips Or Exams With Patient Information Can Be Wirelessly Exported In Dicom Format To Dicom Pacs Supported Dicom Services • Verify • Modality Worklist • Store • Storage Commitment • Secure Dicom (tls) Data Security • Secured Data At Rest: O Device App Starts Only After Confirmation Of Mobile Device Protection With User Authentication • Images And Other Patient Information Data Are Stored In Private Space Of Device With No Access From Other Apps On Mobile Device • Images Are Stored On Device Without Embedded Patient Identification And Linked With Encrypted Patient Database • Fips 140-2 Compliant Database Encryption (aes-256 Bit Encryption) • User Selectable, Additional Pin Protected Access To Patient Data On Device App • Wiping Off Exam Data After 10 Attempts With Incorrect Pin • Secured Data On The Move: • Images Are Anonymized Before Being Shared With Other Apps On The Mobile Device • Support Of Enterprise-grade Wireless Encryption Standards Including Eap And Wpa2 (psk) • Tls Encryption With Optional Peer Authentication To Support Secure Dicom Transfer • Configurable Time Period For Image Removal On The Device After Export To A Dicom Pacs Server Standard Configuration The Following Items Are Included In The Standard • Device Offering: • Device Cl Probe • Device App (device For Ios And Device For Android) • Protective Carrying Case • Hardcopy Quick Start Guide • Electronic Instruction Use Guide • Wireless Charger Pad Including Micro-usb • Cable Country-specific Ac Adapter Available Accessories • Hardcopy User Manual In Different Languages • Additional Protective Carrying Case • Additional Wireless Charger Pad • International Ac Adapters Supported Mobile Platforms Operating System Options • Android Phones And Tablets With Os Version 9, 10 Or 11, Device With 0x64 Arm Based Cpu Architecture And 64-bit Kernel, Android Open Gl Es 3.0, And Compatibility With Google Play Store Or Its Equivalent • Ipad And Iphone Devices With Ios 13 Or 14 Or Its Equivalent Screen Requirements • Size: From 5 To 20 Inches • 960 X 640 (or 640 X 960) Pixel Or More Internal Memory Requirements • 8gb Or More Connectivity Requirements • Ieee 802.11n • Peer-to-peer Connectivity • Bluetooth Ble 4.0 Security Requirements • Wpa2 • Data On Device Must Be Encrypted And Authentication Enabled User Support Tools Device Family Web Portal • Online Services To Enhance The Device Experience By Providing Resources, From Product Information To Clinical And Service Support • Additional Educational Resources Will Be Posted On The Device Web Portal, Including Webinars, Thought Leadership, Further Online Programs And Training Opportunities Ultrasound Education Solutions To Help Users Get Familiar With Common Point-of-care Applications And Improve Ultrasound Skills And Knowledge, Two Digital Education Solutions Are Available Via Our Partners. Point Of Care Ultrasound Focusclass By 123 Sonography • This Course Includes Access To Five Hours Of High-quality Video Content, Easy-to-follow Hands-on Demos, Practical Clinical Examples And Proven Didactive Principles To Help Increase Competence And Confidence. This Program Is Designed For Primary Care Covering A Variety Of Ultrasound Exam Types Including Cardiac, Ob, Abdominal, Lung And Joints • Provides Convenient Ultrasound Education Through Integrated Didactic Instruction, Hands-on Training, And Knowledge Assessment. A Portable, Virtual Ultrasound Training Experience Utilizing Real Patient Cases With A Broad Spectrum Of Normal And Pathologic Conditions. This Offering Includes A Sonosim Probe, Sonosim Drive, And Your Choice Of Five Modules Immediately Accessible Online – Choose From A Wide Selection Of Modules Including Anatomy, Physiology, And Clinical Procedures. Safety Conformance Safety Classification • Device Cl Probe Is Classified As Internally Powered Medical Electrical Equipment With Type Bf Applied Parts According To Iec 60601-1v • Device Cl Probe Is Ce-marked According To Mdd (93/43/eec), Red (2014/53/eu), Rohs (2011/65/eu), And Is Compliant To 2012/19/eu (weee) • Device For Android And Device For Ios Are Ce-marked According To Mdd (93/42/eec) Device Conforms To Applicable Clauses Of The Following Safety Standards: • Iec 60601-1 Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance • Iec 60601-1-2 Medical Electrical Equipment – Part 1-2: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Electromagnetic Disturbances – Requirements And Tests (group One, Class B Per Cispr 11 / En 55011) • Iec 60601-2-37 Medical Electrical Equipment – Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 60601-1-11 Medical Electrical Equipment – Part 1-11: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Used In The Home Healthcare Environment Iec 60601-1-12 Medical Electrical Equipment Part 1-12: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Intended For Use In The Emergency Medical Services Environment En 13718-1 Medical Vehicles And Their Equipment –air Ambulances Part 1: Requirements For Medical Devices Used In Air Ambulances En 1789 Medical Vehicles And Their Equipment –road Ambulances Iso 10993-1 Biological Evaluation Of Medical Devices Part 1: Evaluation And Testing Within A Risk Management Process Iec62304 Medical Device Software – Software Life Cycle Processes. Iec62366-1 Medical Devices – Part 1: Application Of Usability Engineering To Medical Devices - 1 Gallon Ultrasound Gel Tablet General Specification Processor • A14 Bionic •6-core Cpu •4-core Graphics •16-core Neural Engine Storage & Ram •64gb/256gb • 4 Gb Lpddr4x Sdram Display • Liquid Retina Display • Led Backlit Multi‑touch Display With Ips Technology • 2360-by-1640-pixel Resolution At 264 Pixels Per Inch (ppi) • True Tone • 500 Nits Brightness • Fingerprint-resistant Oleophobic Coating • Supports Apple Pencil • (usb-c) • Supports Apple Pencil • (1st Generation) Battery & Charging • Usb-c Port •7,606 Mah Li-ion/•built‐in 28.6‐watt‐hour Connectivity •wi-fi 6 (802.11ax) With 2x2 Mimo •simultaneous Dual Band •bluetooth 5.2 Landscape Stereo Speakers •dual Microphones For Calls, Video Recording, And Audio Recording •umts/hspa/hspa+/dc‑hsdpa •5g (sub-6 Ghz)3 •gigabit Lte (up To 32 Bands)3 •gps/gnss •data Only8 •wi-fi Calling3 -certificate Of Good Standing From 2 Institutions Using This Ultrasound Unit -training And Certification Of Health Personnel To Use The Ultrasound Unit Xxxxxxx Total: 1,800,000.00

Details: Description Rfq No.: Rfq-2025-01-001 Request For Quotation The Deped Division Of Rizal – Baras Elementary School Through Its Bids And Awards Committee, Will Undertake An Alternative Method Of Procurement Through Shopping For The Item/s Stated Below, In Accordance With Section 52.1(b), Of The Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184 Or The Government Procurement Reform Act (gpra): Description Approved Budget For The Contract (abc) Inclusive Of Vat Purhcase Of Baras Es School Supply And Other Materials For The Month Of January And February ₱288,000.00 Delivery Date: 5 Calendar Days Upon Receipt Of Purchase Order Delivery Venue: Baras Elementary School, Jp. Rizal St. Barangay Concepcion, Baras, Rizal Award Of Contract Shall Be Made To The Bidder With The Lowest Quotation For The Subject Items Which Comply With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein: Documents For Submission (certified True Copy If Not Original 3 Copies On Legal Papers): 1. Latest Mayor’s Permit 2. Philgeps Registration 3.dti 4. Tax Clearance Ctc. “please Indicate Item Brand” In Your Submitted Rfq. Quotations/proposals And Documentary Requirements Per Lot May Be Placed In Sealed Envelope And Must Be Delivered/submitted To The Address Below On Or Before January 13, 2025, 8:00 A.m. Late Proposals Shall Not Be Accepted. Opening Of Quotations / Proposals Shall Be On January 13, 2025,10:00 A.m. At Baras Elementary School Conference Room, Cabrera Jp. Rizal St. Barangay Concepcion, Baras, Rizal. Quotations/ Proposals Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Above Mentioned Address. Please Quote Your Lowest Net Price To The Government, Taxes/ Vat Included, Stating The Terms Of Payment And The Shortest Time Of Delivery Of The Items Per Specifications Indicated Above And Furnishing Description, Brochures, Catalog And/or Literature, If Available. In Case You Are The Exclusive Manufacturer/distributor/dealer In The Locality, State So In Your Quotation. Page 2 Of 8 Note: Please Submit Quotation / Proposals (hard Copy) And Required Documents In A Sealed Envelope To: Contact Person: Reyish Francois C. Capistrano Bac, Goods And Services, Secretariat Contact No. : 09395526338 Place Of Submission: Bids And Committee (bac) Office, Conference Room, Jp. Rizal St. Concepcion, Baras, Rizal Baras Elementary School – Bac Reserved The Right To Accept Or Reject Any Quotations / Proposals, And To Annul The Procurement Process And Reject All Quotations / Proposal At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Deped Rizal – Bac Also Reserves The Right To Waive Any Required Formality In The Proposals Received, And Select The Proposal Which It Determines To Be The Most Advantageous To The Government. For Further Information, Please Refer To: Reyish Francois C. Capistrano Bac – Goods And Services, Secretariat Deped, Baras Elementary School Jp. Rizal St. Brgy. Concepcion, Baras, Rizal Contact No.: 09395526338 Email Address: Website: Lolita S. Mateo Chairperson, Bac – Goods And Services Page 3 Of 8 Annex A Price Quotation Form Date: Bac Chairperson Department Of Education Division Of Rizal Taytay, Rizal Sir / Madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Item/s As Follows: Purchase Of Parts And Repair Of The Service Vehicle Quantity Item Description / Unit Cost Total Contract Cost For January Regular Mooe Please Indicate Item Brand. Please Indicate Item Brand Please Indicate Item Brand 350 Reams Bond Paper A4 250 Reams Bond Paper Legal 9 Packed Sticker Paper 10 Boxes Permanent Marker 10 Boxes White Board Marker 15 Boxes Green Ball Pen 15 Boxes Black Ball Pen 4 Packs White Folder A4 100s 5 Packs Laminating Film A4 250 Mic 8 Pieces Heavy Duty Puncher Subtotal For February Regular Mooe 95 Gallons Alcohol 1 Gal. 95 Pieces Hand Sanitizer 500ml 90 Pieces Dishwashing Liquid 1l 30 Packs Gargabe Bag L 100’s 29 Packs Garbage Bag Xl 100’s 35 Packs Garbage Bag Xxl 100’s 35 Packs Garbage Bag Medium 100’s 50 Pieces Air Freshner 340g. 70 Pieces Mosquito Repelant 500ml 70 Pieces Bleaching Liquid 3785 Ml Total Amount In Words: _________________________________ The Above-quoted Prices Are Inclusive Of All Costs And Applicable Taxes. Very Truly Yours, __________________________________ Name / Signature Of Representative ____________________________ Name Of Company ____________________________ Contact No. Page 4 Of 8 Annex B Technical Specifications I Hereby Certify To Comply All The Above Requirements: Supply And Delivery To Baras Elementary School Of Assessment Materials Quantity Unit Of Measure Item Description For December Regular Mooe 350 Reams Bond Paper A4 250 Reams - Bond Paper Legal 9 Packs Sticker Paper 10 Boxes Permanent Marker 10 Boxes White Board Marker 15 Boxes Green Ball Pen 15 Boxes Black Ball Pen 4 Packs White Folder A4 100s 5 Packs Laminating Film A4 250 Mic 8 Pices Heavy Duty Puncher For February Regular Mooe 95 Gallon Alcohol 1 Gal. 95 Pieces Hand Sanitizer 500 Ml 90 Pieces Dishwashing Liquid 1l 30 Packs Gargabe Bag L 100’s 29 Packs Garbage Bag Xl 100’s 35 Packs Garbage Bag Xxl 100’s 35 Packs Garbage Bag Medium 100’s 50 Pieces Air Freshner 340g. 70 Pieces Mosquito Repelant 500ml 70 Pieces Bleaching Liquid 3785 Ml _________________________ ____________________________ _______________ Name Of Company / Bidder Signature Over Printed Name Date Of Representative Page 5 Of 8 Annex C Schedule Of Requirements Bidders Must State Either “comply” Or “not Comply” Or Any Equivalent Term In The Column “statement Of Compliance” Against Each Of The Individual Parameters Of Each “specification”. Please Do Not Just Place Check In The Bidder’s “statement Of Compliance”. Supply And Delivery To Sdo Rizal Of Training Supplies For Als Program Assessment Item Specification Quantity Delivered (week / Months) For January Regular Mooe 1 Bond Paper A4 350 Reams 5 Calendar Days Upon Receipt Of Purchase Order 2 Bond Paper Legal 250 Reams 5 Calendar Days Upon Receipt Of Purchase Order 3 Sticker Paper 9 Packed 5 Calendar Days Upon Receipt Of Purchase Order 4 Permanent Marker 10 Boxes 5 Calendar Days Upon Receipt Of Purchase Order 5 White Board Marker 10 Boxes 5 Calendar Days Upon Receipt Of Purchase Order 6 Green Ball Pen 15 Boxes 5 Calendar Days Upon Receipt Of Purchase Order 7 Black Ball Pen 15 Boxes 5 Calendar Days Upon Receipt Of Purchase Order 8 White Folder A4 100s 4 Packs 5 Calendar Days Upon Receipt Of Purchase Order 9 Laminating Film A4 250 Mic 100’s 5 Packs 5 Calendar Days Upon Receipt Of Purchase Order 10 Heavy Duty Puncher 8 Pieces 5 Calendar Days Upon Receipt Of Purchase Order For February Regular Mooe 1 Alcohol 1 Gal. 95 Gallons 5 Calendar Days Upon Receipt Of Purchase Order 2 Hand Sanitizer 500ml 95 Pieces 5 Calendar Days Upon Receipt Of Purchase Order 3 Dishwashing Liquid 1l 90 Pieces 5 Calendar Days Upon Receipt Of Purchase Order 4 Gargabe Bag L 100’s 30 Packs 5 Calendar Days Upon Receipt Of Purchase Order 5 Garbage Bag Xl 100’s 29 Packs 5 Calendar Days Upon Receipt Of Purchase Order 6 Garbage Bag Xxl 100’s 35 Packs 5 Calendar Days Upon Receipt Of Purchase Order 7 Garbage Bag Medium 100’s 35 Packs 5 Calendar Days Upon Receipt Of Purchase Order 8 Air Freshner 340g. 50 Pieces 5 Calendar Days Upon Receipt Of Purchase Order 9 Mosquito Repelant 500 Ml 70 Pices 5 Calendar Days Upon Receipt Of Purchase Order 10 Bleaching Liquid 3785 Ml 70 Pieces 5 Calendar Days Upon Receipt Of Purchase Order I Hereby Certify To Comply And Deliver All The Above Requirements: ___________________________ ______________________________ ______________ Name Of Company / Bidder Signature Over Printed Name Date Page 9 Of 9 Annex D Terms And Conditions 1. Service Provider Shall Provide Correct And Accurate Information Required In This Form. 2. The Service Provider Shall Ensure The Proper Disinfecting Of Goods Before Its Delivery To Sdo Rizal Office. 3. The Service Provider Shall Observe Safety Protocols Against Covid-19 Especially Inproper Handling Of Goods. 4. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. Quotations Provided Herein Shall Remain Unchanged And Shall Be Used From The Evaluation And Calculation Of The Lessor’s Total Quotation To Contract Implementation And Payment. 5. Price Quotation/s To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. 6. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 7. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, And Other Terms And Conditions Stated Herein. 8. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 9. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Deped Rizal - Bac Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. I Hereby Certify To Comply And Deliver All The Above Requirements: _____________________ ______________________________ _______________ Name Of Company / Bidder Signature Over Printed Name

Details: Polregio Sa Invites Contractors with experience in the subject of the order to submit price information for replacement bus transport on the Słupsk - Lębork section from 1 February to 8 March 2025. This Inquiry does not constitute an offer within the meaning of the Civil Code. In the Attachments tab you will find: - Agreement Template, Including the Conditions That Must Be Met by the Carrier - GDPR Information Clause - Timetable for replacement transport provided by a vehicle with a minimum of 20 seats (1 Bus for 1 Train). Two journeys a day from Lębork to Słupsk Departure at 11:36 pm and return to Lębork at 2:10 am. Number of road kilometres to be completed a maximum of 6480 (one journey is 81 road km).

Details: Page 1 Of 11 page 1 Of 14 page 15 Of 16 page 1 Of page 1 Of description this Is A Combined Synopsis Solicitation (css) For Commercial Services Prepared In Accordance With The Format In Far Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services., Using Simplified Acquisition Procedures Found At Far Part 13 And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. this Solicitation Number 36c24425q0237 Is Being Issued As A Request For Quote (rfq). The Government Anticipates Awarding One, Five-year, Firm-fixed-price Indefinite Delivery - Indefinite Quantity (idiq) Contract Resulting From This Solicitation. This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-07 (effective Date 08/29/2024) And Can Be Found At: Far | Acquisition.gov . the Associated North American Industrial Classification System (naics) Code For This Procurement Is 238220 With A Small Business Size Standard Of $19.0 Million And The Product/service Code Is: J045 this Solicitation Is Unrestricted. â  this Solicitation Requires Registration With The System For Award Management (sam) Prior To Award, Pursuant To Applicable Regulations And Guidelines. Registration Information Is At: Http://www.sam.gov . Confirmation Of Sam Registration Will Be Validated Prior To Awarding A Contract.â  â  the Veterans Integrated Service Network 04 (visn4), Has A New Requirement For Guage Calibration Services At The Lebanon Va Medical Center As Listed In The Statement Of Work (sow), Attachment A.â â  â  the Contractor Shall Provide All Necessary Requirements Cited In The Sow. All Work Is To Be Performed In Accordance With Applicable Federal, State, And Local Regulations Or Ordinances. all Interested Offerors Shall Provide A Quotation For The Following: Pricing Schedule, Attachment C. place Of Performance: Lebanon Vamc. visn-04 Intends To Award One Five-year Idiq Contract With Orders Anticipated To Begin Approximately: 1/19/2025-1/18/2030. a Complete Description Of The Services To Be Acquired, And/or Applicable Government Need(s) Are As Follows: See Attachment A: Performance Work Statement. contracting Office Address: department Of Veterans Affairs regional Procurement Office East network Contracting Office 4 (nco 4) va Pittsburgh Medical Center 1010 Delafield Rd., Pittsburgh, Pa 15215 contract Specialist: Andrew Chmielewski 52.212-4, Contract Terms And Conditions - Commercial Products And Commercial Services (nov 2023) 52.252-2 Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): http://www.acquisition.gov/far/index.html Http://www.va.gov/oal/library/vaar/ (end Of Clause) far Number title date 52.203-17 contractor Employee Whistleblower Rights And Requirement To Inform Employees Of Whistleblower Rights nov 2023 52.204-9 52.204-13 personal Identity Verification Of Contractor Personnel system For Award Management Maintenance jan 2011 oct 2018 52.204-18 commercial And Government Entity Code Maintenance aug 2020 52.232-40 providing Accelerated Payments To Small Business Subcontractors mar 2023 52.216-18 Ordering (aug 2020) (a) Any Supplies And Services To Be Furnished Under This Contract Shall Be Ordered By Issuance Of Delivery Orders Or Task Orders By The Individuals Or Activities Designated In The Schedule. Such Orders May Be Issued From 1/19/2025-1/18/2030. (b) All Delivery Orders Or Task Orders Are Subject To The Terms And Conditions Of This Contract. In The Event Of Conflict Between A Delivery Order Or Task Order And This Contract, The Contract Shall Control. (c) A Delivery Order Or Task Order Is Considered "issued" When (1) If Sent By Mail (includes Transmittal By U.s. Mail Or Private Delivery Service), The Government Deposits The Order In The Mail; (2) If Sent By Fax, The Government Transmits The Order To The Contractor S Fax Number; Or (3) If Sent Electronically, The Government Either (i) Posts A Copy Of The Delivery Order Or Task Order To A Government Document Access System, And Notice Is Sent To The Contractor; Or (ii) Distributes The Delivery Order Or Task Order Via Email To The Contractor S Email Address. (d) Orders May Be Issued By Methods Other Than Those Enumerated In This Clause Only If Authorized In The Contract. (end Of Clause) 52.216-19 Order Limitations (oct 1995) (a) Minimum Order. When The Government Requires Supplies Or Services Covered By This Contract In An Amount Of Less Than $200.00, The Government Is Not Obligated To Purchase, Nor Is The Contractor Obligated To Furnish, Those Supplies Or Services Under The Contract. (b) Maximum Order. The Contractor Is Not Obligated To Honor (1) Any Order For A Single Item In Excess Of $200.00; (2) Any Order For A Combination Of Items In Excess Of $50,000.00; Or (3) A Series Of Orders From The Same Ordering Office Within 30 Days That Together Call For Quantities Exceeding The Limitation In Paragraph (b)(1) Or (2) Of This Section. (c) If This Is A Requirements Contract (i.e., Includes The Requirements Clause At Subsection 52.216-21 Of The Federal Acquisition Regulation (far)), The Government Is Not Required To Order A Part Of Any One Requirement From The Contractor If That Requirement Exceeds The Maximum-order Limitations In Paragraph (b) Of This Section. (d) Notwithstanding Paragraphs (b) And (c) Of This Section, The Contractor Shall Honor Any Order Exceeding The Maximum Order Limitations In Paragraph (b), Unless That Order (or Orders) Is Returned To The Ordering Office Within 1 Days After Issuance, With Written Notice Stating The Contractor's Intent Not To Ship The Item (or Items) Called For And The Reasons. Upon Receiving This Notice, The Government May Acquire The Supplies Or Services From Another Source. (end Of Clause) 52.216-22 Indefinite Quantity (oct 1995) this Is An Indefinite-quantity Contract For The Supplies Or Services Specified, And Effective For The Period Stated, In The Schedule. The Quantities Of Supplies And Services Specified In The Schedule Are Estimates Only And Are Not Purchased By This Contract. (b) Delivery Or Performance Shall Be Made Only As Authorized By Orders Issued In Accordance With The Ordering Clause. The Contractor Shall Furnish To The Government, When And If Ordered, The Supplies Or Services Specified In The Schedule Up To And Including The Quantity Designated In The Schedule As The "maximum." The Government Shall Order At Least The Quantity Of Supplies Or Services Designated In The Schedule As The "minimum." (c) Except For Any Limitations On Quantities In The Order Limitations Clause Or In The Schedule, There Is No Limit On The Number Of Orders That May Be Issued. The Government May Issue Orders Requiring Delivery To Multiple Destinations Or Performance At Multiple Locations. (d) Any Order Issued During The Effective Period Of This Contract And Not Completed Within That Period Shall Be Completed By The Contractor Within The Time Specified In The Order. The Contract Shall Govern The Contractor's And Government's Rights And Obligations With Respect To That Order To The Same Extent As If The Order Were Completed During The Contract's Effective Period; Provided, That The Contractor Shall Not Be Required To Make Any Deliveries Under This Contract After 12/18/2030. (end Of Clause) far 52.237-2 Protection Of Government Buildings, Equipment, And Vegetationâ (apr 1984) the Contractorâ shallâ use Reasonable Care To Avoid Damaging Existing Buildings, Equipment, And Vegetation On The Government Installation. If The Contractor S Failure To Use Reasonable Care Causes Damage To Any Of This Property, The Contractorâ shallâ replace Or Repair The Damage At No Expense To The Government As Theâ contracting Officerâ directs. If The Contractor Fails Or Refuses To Make Such Repair Or Replacement, The Contractorâ shallâ be Liable For The Cost, Whichâ mayâ be Deducted From The Contract Price. (end Of Clause) vaar 852.203-70 Commercial Advertising (may 2018) vaar 852.232-72 Electronic Submission Of Payment Requests (nov 2018) vaar 852.242-71 Administrative Contracting Officer (oct 2020) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders-commercial Products And Commercial Services (may 2024). the Following Subparagraphs Are Applicable: Subparagraph (b)(5), (b)(9), (b)(11), (b)(12), (b)(16), (b)(31), (b)(32), (b)(33), (b)(34), (b)(35), (b)(36), (b)(37), (b)(39), (b)(46), (b)(51), (b)(55), (b)(56), (b)(59). Subparagraph (c)(1), (c)(2) Class 25190/ Monetary Wage-fringe Benefits $34.69, (c)(7), (c)(8). the Following Solicitation Provisions Apply To This Acquisition And May Be Incorporated By Reference: 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) this Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessed Electronically At This/these Address(es): http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/ (end Of Provision) far Number title date 52.204-7 system For Award Management oct 2018 52.204-16 commercial And Government Entity Code Reporting aug 2020 52.229-11 tax On Certain Foreign Procurements Notice And Representation jun 2020 852.233-70 852.239-75 protest Content/alternative Dispute Resolution information And Communication Technology Accessibility Notice oct 2018 feb 2023 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance (nov 2021) 52.216-1 Type Of Contract (apr 1984) the Government Contemplates Award Of A Firm-fixed-price, Idiq Contract Resulting From This Solicitation. 52.233-2 Service Of Protest (sep 2006) notify The Following: Nicholas Guzenski Through Va Email: Nicholas.guzenski@va.gov 852.233 70, Protest Content/alternative Dispute Resolution (oct 2018) (end Of Clause) addendum To Far 52.212-1 Instructions To Offerors-commercial Products And Commercial Services: any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Point Of Contact Listed Below. quotes In Response To This Rfq Are Due On 2:00 Pm (est), Tuesday, January 14, 2025. Quotes Shall Be Submitted In Writing And Sent Via Email To Contracting Specialist: Andrew Chmielewski; Andrew.chmielewski@va.gov. Please Insert Solicitation Number 36c24425q0237 Lebanon Guage Calibration Services In The Subject Line Of Your Email. All Submissions Shall Be 5mb Or Less. If The Email Is More Than 5mb, Submit Multiple Emails Labeling Them 1 Of Xx, 2 Of Xx, Etc. Late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Shall Be Forwarded In Writing Via Email To The Contracting Specialist By 2:00 Pm Est, Thursday January 9, 2025. Questions Will Not Be Accepted After This Date. Responses To The Offeror S Question(s) Will Be Posted Via An Amendment On Sam.gov / Contract Opportunities Via: Http://www.sam.gov failure To Follow All Instructions May Result In Offeror(s)s Being Determined As Non-responsive And Be Removed From This Competition. All Proposals Shall Be Valid 60 Days From The Quote Response Date. offeror(s)s Are Cautioned To Be Responsive To All Requirements In The Sow And To Provide Sufficient Information To Allow For Evaluation Of The Quotes. offeror S Are Required To Submit The Following: attachment C: Price Schedule: Please Complete Price Information In The Last Two Columns Of Attachment C And Return With Your Quote. to Facilitate The Award Process, All Quotes Shall Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" and A Statement To Acknowledge Amendments, If Applicable. cover Letter. Offeror(s)s Shall Submit A Cover Letter Identifying Their Company Name, Contact Information, Cage Code, Sam Unique Entity Id (uei) Number Of The Prime And Any Teaming Partner/subcontractor. offeror(s)s Shall Include A Completed Copy Of The Provision 52.212-3 With Their Quote If The Offeror(s) Has Not Completed It Electronically In The System For Award Management (sam), Accessed Via: Http://www.sam.gov offeror(s)s Shall Submit A Technical Capability Which Shall Address The Following At A Minimum: staffing/contractor Personnel: Explain Ability To Supply Adequate Staff To Perform Gauge Calibration In Accordance With The Sow. qualifications: Explain Contractor S Ability To Meet Industry Standards In Accordance With The Sow With Regards To Gauge Calibration. the Evaluator Shall Submit Past Performance Questionnaire (attachment B) With Their Quote. Offeror(s)s Shall Provide Up To Three (3) References, Preferably Of Government Work, Performed In The Last Three (3) Years. Past Performance Information Shall Be Recent (performance Within The Last Three Years) And Relevant To This Scope Of Work. All Past Performance References Shall Be Completed By The Evaluator And Include Name Of Client, Customer Point Of Contact, Customer Telephone Number, Contract Number, Award Amount, Project/service Location, And Other Information Relevant To This Quote. the Apparent Awardees Past Performance Will Be Evaluated As Part Of The Contractor Responsibility Determination To Ensure The Presence Of An Acceptable Performance Record In Accordance With Far 9.104-1. The Government Reserves The Right To Seek Past Performance Information From Any Sources Not Included In Your Past Performance And Available To The Government To Include, But Not Limited To, Cpars Or Other Databases; Interviews With Program Managers, Customers, And Contracting Officers; And References Provided By The Contractor. the Contractor Must Include A Signed Copy Of Vaar 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction. This Shall Be Submitted With The Solicitation Attachments. addendum To 52.212-2 Evaluation Commercial Products And Commercial Services the Government Will Perform An Evaluation Using A Comparative Evaluation Of Each Quote. The Government Will Compare Quotes To One Another In Order To Select The Quote That Best Benefits The Government. Comparative Evaluation Will Be Conducted In Accordance With Far 13.106-2(b)(3). The Following Factors Shall Be Used To Evaluate Offeror(s)s: 1. Price 2. Technical Capability (b) A Written Notice Of Award Or Acceptance Of A Quote, Mailed Or Otherwise Furnished To The Successful Offeror(s) Within The Time For Acceptance Specified In The Quote, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer's Specified Expiration Time, The Government May Accept A Quote, Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. the Contracting Officer Will Award One, Firm Fixed Price Contract Resulting From This Rfq To The Responsible Offeror(s) Whose Quote Conforming To The Rfq Is Most Advantageous To The Government. price The Government Reserves The Right To Award To An Offeror With Other Than The Lowest Price. The Award Will Be Made To The Offeror Whose Quote Represents The Best Overall Value To The Government. technical The Offeror Clearly Demonstrates In Its Response A Clear Understanding Of All The Government S Requirements And Effective Approach For The Completion Of Service In Accordance With The Sow. past Performance Offerors Must Have A Record Of Satisfactory Or Neutral Past Performance. If No Record Of Past Performance Is Found, The Offeror Will Receive A Rating Of Neutral. The Government Will Utilize But Is Not Limited To Internal Documentation Including Federal Awardee Performance And Information System (fapiis) For Determining The Past Performance Of Offerors. records Management Language For Contracts when Federal Agencies Acquire Goods Or Services, They Need To Determine What Federal Records Management Requirements Should Be Included In The Contract. Federal Contractors Often Create, Send, Or Receive Federal Records. Federal Contracts Should Provide Clear Legal Obligations Describing How The Contract Employees Must Handle Federal Records. agency Records Officers, Procurement Counsel, And Acquisitions Officers Must Discuss How To Integrate Records Management Obligations Into Their Existing Procurement Processes. Nara Has Developed The Following Language To Be Included As An Agency-specific Term And Condition In Federal Contracts For A Variety Of Services And Products. The Majority Of Contracts Should Include Language On Records Management Obligations, But Each Contract Should Be Evaluated Individually. For Example, The Data-rights Paragraph (paragraph 10 Below) May Not Be Appropriate For All Contracts. Instead, Agencies May Be Better Served By One Of The Established Data-rights Clauses In The Federal Acquisition Regulations. this Language Should Not Replace Specific Records Management Requirements Included Within Federal Information System Contracts. records Management Obligations a. Applicability this Clause Applies To All Contractors Whose Employees Create, Work With, Or Otherwise Handle Federal Records, As Defined In Section B, Regardless Of The Medium In Which The Record Exists. b. Definitions Federal Record As Defined In 44 U.s.c. § 3301, Includes All Recorded Information, Regardless Of Form Or Characteristics, Made Or Received By A Federal Agency Under Federal Law Or In Connection With The Transaction Of Public Business And Preserved Or Appropriate For Preservation By That Agency Or Its Legitimate Successor As Evidence Of The Organization, Functions, Policies, Decisions, Procedures, Operations, Or Other Activities Of The United States Government Or Because Of The Informational Value Of Data In Them. the Term Federal Record: 1. Includes [agency] Records. 2. Does Not Include Personal Materials. 3. Applies To Records Created, Received, Or Maintained By Contractors Pursuant To Their [agency] Contract. 4. May Include Deliverables And Documentation Associated With Deliverables. c. Requirements 1. Contractor Shall Comply With All Applicable Records Management Laws And Regulations, As Well As National Archives And Records Administration (nara) Records Policies, Including But Not Limited To The Federal Records Act (44 U.s.c. Chs. 21, 29, 31, 33), Nara Regulations At 36 Cfr Chapter Xii Subchapter B, And Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974 (5 U.s.c. 552a). These Policies Include The Preservation Of All Records, Regardless Of Form Or Characteristics, Mode Of Transmission, Or State Of Completion. 2. In Accordance With 36 Cfr 1222.32, All Data Created For Government Use And Delivered To, Or Falling Under The Legal Control Of, The Government Are Federal Records Subject To The Provisions Of 44 U.s.c. Chapters 21, 29, 31, And 33, The Freedom Of Information Act (foia) (5 U.s.c. 552), As Amended, And The Privacy Act Of 1974 (5 U.s.c. 552a), As Amended And Must Be Managed And Scheduled For Disposition Only As Permitted By Statute Or Regulation. 3. In Accordance With 36 Cfr 1222.32, Contractor Shall Maintain All Records Created For Government Use Or Created In The Course Of Performing The Contract And/or Delivered To, Or Under The Legal Control Of The Government And Must Be Managed In Accordance With Federal Law. Electronic Records And Associated Metadata Must Be Accompanied By Sufficient Technical Documentation To Permit Understanding And Use Of The Records And Data. 4. [agency] And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Records May Not Be Removed From The Legal Custody Of [agency] Or Destroyed Except For In Accordance With The Provisions Of The Agency Records Schedules And With The Written Concurrence Of The Head Of The Contracting Activity. Willful And Unlawful Destruction, Damage Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. In The Event Of Any Unlawful Or Accidental Removal, Defacing, Alteration, Or Destruction Of Records, Contractor Must Report To [agency]. The Agency Must Report Promptly To Nara In Accordance With 36 Cfr 1230. 5. The Contractor Shall Immediately Notify The Appropriate Contracting Officer Upon Discovery Of Any Inadvertent Or Unauthorized Disclosures Of Information, Data, Documentary Materials, Records Or Equipment. Disclosure Of Non-public Information Is Limited To Authorized Personnel With A Need-to-know As Described In The [contract Vehicle]. The Contractor Shall Ensure That The Appropriate Personnel, Administrative, Technical, And Physical Safeguards Are Established To Ensure The Security And Confidentiality Of This Information, Data, Documentary Material, Records And/or Equipment Is Properly Protected. The Contractor Shall Not Remove Material From Government Facilities Or Systems, Or Facilities Or Systems Operated Or Maintained On The Government S Behalf, Without The Express Written Permission Of The Head Of The Contracting Activity. When Information, Data, Documentary Material, Records And/or Equipment Is No Longer Required, It Shall Be Returned To [agency] Control Or The Contractor Must Hold It Until Otherwise Directed. Items Returned To The Government Shall Be Hand Carried, Mailed, Emailed, Or Securely Electronically Transmitted To The Contracting Officer Or Address Prescribed In The [contract Vehicle]. Destruction Of Records Is Expressly Prohibited Unless In Accordance With Paragraph (4). 6. The Contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material And/or Records Generated Under, Or Relating To, Contracts. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And [agency] Guidance For Protecting Sensitive, Proprietary Information, Classified, And Controlled Unclassified Information. 7. The Contractor Shall Only Use Government It Equipment For Purposes Specifically Tied To Or Authorized By The Contract And In Accordance With [agency] Policy. 8. The Contractor Shall Not Create Or Maintain Any Records Containing Any Non-public [agency] Information That Are Not Specifically Tied To Or Authorized By The Contract. 9. The Contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected From Public Disclosure By An Exemption To The Freedom Of Information Act. 10. The [agency] Owns The Rights To All Data And Records Produced As Part Of This Contract. All Deliverables Under The Contract Are The Property Of The U.s. Government For Which [agency] Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. Any Contractor Rights In The Data Or Deliverables Must Be Identified As Required By Far 52.227-11 Through Far 52.227-20. 11. Training. All Contractor Employees Assigned To This Contract Who Create, Work With, Or Otherwise Handle Records Are Required To Take [agency]-provided Records Management Training. The Contractor Is Responsible For Confirming Training Has Been Completed According To Agency Policies, Including Initial Training And Any Annual Or Refresher Training. â  section D - Contract Documents, Exhibits, Or Attachmentsâ  â  see Attached Document: Attachment A Statement Of Work see Attached Document: Attachment B Past Performance Questionnaire see Attached Document: Attachment C Price Scheduleâ â  see Attached Document: Attachment D Wage Determination point Of Contact combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 3 Of 3 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 3 andrew Chmielewski department Of Veterans Affairs regional Procurement Office East network Contracting Office 4 (nco 4) 1010 Delafield Rd., Pittsburgh, Pa 15215 andrew.chmielewski@va.gov end Of Document

Details: The Order Includes The Provision Of On-demand Traffic “emil Taunusstein” In Area Operations, Hereinafter Referred To As “odv”. In Terms Of Approval, This Corresponds To Regular Scheduled Traffic In Accordance With Section 44 Pbefg. This Involves A Demand-oriented, Timetable-independent Transport Of People By The Operator Using Passenger Cars Ordered In Advance By The Passengers And Without A Fixed Route Between Certain Entry And Exit Points In The Operating Area Determined By The Client. Operation Of All Virtual Stopping Points In The Control Area: Https://www.google.com/maps/d/0/viewer?mid=1lfx6h_jur7lubull1dfs4ayhsolmkps&femb=1&ll=50.1583023410848%2c8.1966926373&z=13 The Order Includes. . Driving Staff, Disposition And Depot, The Procurement And Maintenance Of The Vehicles, As Well As The Provision Of The Necessary Software. Passengers' Travel Requests Are To Be Served As Promptly And Efficiently As Possible. The Waiting Times Should Be As Short As Possible. Travel Requests Are Booked Via The App (see On-demand Software). In Addition, The Operator Also Accepts Travel Requests By Telephone During Operating Hours. The Requirements For The On-demand Software Can Be Seen In The Appendix “http://ausscription.igdb.de/rtv/20240105_funktionalitaeten_odv_software.pdf”. The Odv Is Operated At The Following Times: Monday To Thursday: 5:30 A.m. - 10:30 P.m. Friday: 5:30 A.m. - 12:30 A.m. Saturday: 7:30 A.m. - 12:30 A.m. Sunday And Public Holidays: 8:30 A.m. - 22 :30 P.m. During Operating Hours, One To Two Vehicles Are In Use At The Same Time. From The Distribution Of The Service Time In The System “http://ausschreib.igdb.de/rtv/20240103_mindestsoll_betriebsstunden_odv_2025.pdf” There Is An Expected Total Of 9,058 Operating Hours In A Standard Year (250 Days Monday To Friday, 52 Saturdays And 63 Sundays And Public Holidays). , Of Which 4,875 Are In Daytime Traffic And 4,183 Are In Late-night And Weekend Traffic. Requirements For The Vehicles: The Vehicle Fleet Consists Of At Least Three Battery-electric Minibuses Or Minivans With A Maximum Of Nine Seats (including Driver's Seat) Per Vehicle. In Each Vehicle There Are At Least Five And Up To Seven Passenger Seats In The Passenger Compartment. The Front Rows Of Seats In The Passenger Compartment Have A Maximum Of Two Seats And Only The Last Row Of Seats Has Up To Three Seats, So That It Is Possible To Climb Through To The Rear Without Folding Down The Seats. Passenger Seats Are Not Counted Or Used As Passenger Seats. At Least Two Of The Vehicles Have A Barrier-free Parking Space For Wheelchairs With Devices To Properly Secure Passengers. If The Wheelchair Space Is Used, The Number Of Additional Passenger Seats In The Vehicle May Be Temporarily Reduced To Three. All Vehicles Have A Step On The Side Door To Make It Easier For Passengers To Get In. The Common Conditions Of Carriage Of The Rhein-main-verkehrsverbund (gb-rmv) Apply On-demand Transport In The Rhine-main Transport Association Https://www.rmv.de/c/de/fahrkarten/infos-regelen/on-demand-verkehre-befoerderung-und-tarif.

Details: Polregio Sa West Pomeranian Plant in Szczecin asks for a price offer for the performance of a service consisting of: 1) Dismantling of monoblock wheels from 2 rolling wheel sets and 2 drive wheel sets from an En63h series vehicle, 2) Assembly of dismantled monoblock rolling wheels onto 2 drive sets, together with performing a revision inspection of the sets, together with whitening of the brake discs (in the permanent scope, among other things, bearings and defectoscopy, new standard parts, painting of wheels, etc.) 3) Return of dismantled wheels from drive wheel sets and return of secured rolling axles (on special stands) The wheels are located in Kołobrzeg Transport is provided by the Contractor In the offer, please specify the terms: payment, delivery, implementation time/completion deadline.

Details: Contact Information|4|n7m3.12|eay|7176053233|jamie.kershaw@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo-invoice & Receiving Report||tbd|n00104|tbd|tbd|see Schedule|tbd|see Schedule|n/a|n/a|n/a|n/a|n/a|n/a|| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| small Business Subcontracting Plan (sep 2023)|4||||| safeguarding Sensitive Conventional Arms, Ammunition, And Explosives (nov 2023))|9|||||||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| offerors Shall Submit Proposals Via Neco Or Email Only. Casrep Accelerated Delivery Is Encouraged And Accepted At No Additional Cost To Government. all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: 100 Days government Source Inspection (gsi) Is Required. please Note Freight Is Handled By The Navy As Per The Commercial Asset Visibility (cav) Statement Of Work. your Quote Should Include The Following Information: Quote Amount And Rtat - Unit Price:__________ - Total Price:__________ - Repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Check One: Firm-fixed-price ___ Estimated ___ Not-to Exceed (nte): ___ Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location - Awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As "awardee Cage": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As "awardee Cage":__________ Iot Compare Repair Price To Price To Buy New New Unit Price:__________ New Unit Delivery Lead-time:__________ important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If A price Reduction Is Required Due To Unexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;7y193 H418517-1; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Contact Information|4|n712.20|ae4|717-605-4614|macayla.n.welsh.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo Invoice And Receiving ||tbd|n00104|tbd|tbd|see Schedule |see Schedule|see Schedule||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| annual Representations And Certifications (may 2024)|13|334111|1250 # Of Employees|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To: Extend The Offer Due Date The Offer Due Date Is Extended To 13 Jan 2025. All Other Terms And Conditions Remain The Same. Poc: Macayla Welsh poc Email: Macayla.n.welsh.civ@us.navy.mil \ Casrep Accelerated Delivery Is Encouraged And Accepted At No Additional Cost To Government. all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: 136 government Source Inspection (gsi) Is Required. please Note Freight Is Handled By The Navy As Per The Commercial Asset Visibility (cav) Statement Of Work. your Quote Should Include The Following Information: Quote Amount And Rtat Unit Price:__________ Total Price:__________ Repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints. _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Check One: Firm-fixed-price ___ Estimated ___ Not-to Exceed (nte): ___ Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair Teardown & Evaluation Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract price, Not-to Exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location Awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As "awardee Cage": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As "awardee Cage":__________ Iot Compare Repair Price To Price To Buy New New Unit Price: __________ New Unit Delivery Lead-time: __________ Note All Repair Awards Will Be Pre-populated With The Following Award Remarks: rtat, Throughput Constraint, And Induction Expiration Date Included In Subclin Remarks Above Are Defined As Follows: rtat: Repair Turn-around Time Defined As Induction Start Date To End Date (days). throughput Constraint: Total Assets To Be Repaired Monthly After Initial Delivery Commences. A Throughput Of 0000/month Reflects No Throughput Constraint. induction Expiration Date: Any Asset Received After This Date In Days Is Not Authorized To Be Repaired Without Bi-lateral Agreement Between The Vendor And Contracting Officer. subclin Remarks (pre-populated For Each Subclin) rtat=0000 throughput Constraint=0000/month induction Expiration Date=000 (nte 365 Days) any Questions Should Be Directed To The Poc For This Solicitation. \ 1. Scope 1.0.1 Full Item Name For Terminal,data Proce Referenced In This Contract/purchase Order Is ;data Processing Terminal; . 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Terminal,data Proce . ;the Government Furnished Material Shall Consist Of The Following Parts: P/n 05bla0005 Backlight And P/n 05mbw24mb 24mb Motherboard; 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-130 | | |n |121116|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The Terminal,data Proce Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;19397 8334109; 3.2 Marking - This Item Shall Be Physically Identified In Accordance With Mil-std-130. 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.3 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161.

Details: Sources Sought Announcement contracting Office Address: department Of Defense Education Activity (dodea), Facilities Procurement Branch, The Mark Center, 4800 Mark Center Drive, Alexandria, Virginia 22350. introduction: the Department Of Defense Education Activity (dodea) Is Issuing This Request For Information (rfi) As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For The Dodea Facilities Asset Management Program (fam). This Rfi Is An Opportunity For Industry To Assist In Further Refining Dodea’s Potential Contracting Approaches For Fam. The Intent Is For Industry To Share Their Experiences With Similar Efforts And To Provide Comments And Suggestions On The Candidate Concepts And Objectives In This Rfi. The Government Plans To Use The Information Provided By Industry To Develop A Comprehensive Procurement Strategy And A Fam Solicitation. Any Information Used Will Be On A Non-attribution Basis. This Will Be An 8(a) Competitive Award. dodea Operates A Diverse And Geographically Dispersed School District For 68,000 Military Connected Students In 7 States And 11 Countries And Territories. Dodea’s Goal Is To Provide An Exemplary Education That Inspires And Prepares All Students For Success In A Dynamic, Global Environment. One Of The Prerequisites For Meeting This Goal Is To Ensure That All Schools Meet The Dodea Standard For Providing Safe, Secure, And Well-managed Environments That Focus On Student Achievement. Dodea Supports Its Field Facility Organizations By Providing Standardized Tools And Consistent Performance Metrics To Assist Them In Their Management Of Facility Assets. requirement Description: maintenance Services Are Required To Maintain A Safe, Healthy, And Sanitary School Environment For All Faculty And Students Within Dodea. The Government Seeks To Provide A Full-service Contract To Support All Operational, Management, And Preventative Maintenance To Ensure That Dodea School Assets Are Managed In Accordance With The Objectives And Standards Outlined Within This Performance Work Statement (pws). Therefore, This Requirement Calls For Continuous Effort On The Part Of The Contractor To Ensure That The Safety And Functionality Of All Dodea Facilities Are Maintained Throughout The Life Of The Contract. scope Of Work. The Contractor Shall Provide All Management, Personnel, Labor, Equipment, Tools, Vehicles, Materials, Supervision, Subcontracts, Transportation, Other Items/services Necessary To Perform All Operations, Inspections, Technical Support, And Facility Management Support Tasks And Functions For All Dodea Facilities As Defined In The Pws. The Contractor Shall Conduct Building And Facility Surveys, Condition Assessments, Data Collection, Reporting, And Database Management (planning, Documenting, Tracking, And Reporting Data/findings). Work Shall Be Performed And Documentation Shall Be Maintained To The Standards Set Forth In This Contract, The Asbestos Hazard Emergency Response (ahera), And All Other Applicable Codes And Regulations To Ensure Full Compliance With Applicable Codes And Standards. The Contractor Will Be Required To Provide And Manage A Full-service Fam Program For All Dodea Installations. The Major Elements Of The Services Required Include: 1. Asbestos Hazard Emergency Response (ahera) Inspections And Reports 2. Facility Condition Assessment (fca) Reports (no Remediation Services) 3. Facility Utilization Survey (fus) Drawings And Database Monitoring/updates 4. Real Property Inventory (rpi) Reports, Reconciliation, Tech Support/database Management, Mitigation And Tracking. 5. Database Management, Maintain A Database For All Data Collected Under This Contract. 6. Transition-in/out. period Of Performance: base Year Plus Four (4) One (1) Year Option Periods. place Of Performance: dodea Has Approximately 700 Buildings That Accounts For Approximately 20m Gross Square Feet In The Continental United States And Outside The Continental United States. Dodea Requires Field Assessments On A Region Per Year Which Is About One Third Of The Portfolio Inventory. sources Sought: the Anticipated North American Industry Classification System Code (naics) For This Requirement Is 541620 – Environmental Consulting Services, With The Corresponding Size Standard Of $19.0 M. This Sources Sought Synopsis Is Requesting Responses To The Following Criteria From All Sources That Can Provide The Required Services Under The Naics Code. If An Alternative Naics Code Is More Appropriate, Please Provide Recommended Codes With Description And Rationale In Your Response. the Responder Is To Provide Answers To The Following Questions: • Do You Have An Accounting System? Date Of Last Audit? Who Performed? Determined Adequate/inadequate? • Are You Interested In: Prime Contract? Teaming To Include Joint Venture? Subcontractor Opportunities? • Please Provide A Listing Of All Active Government-wide Ordering Contracts Currently Held By Your Company That May Accommodate The Scope Of This Requirement. Provide The Contract Number, The Name Of The Contractor, And The Current Period Of Performance Of The Contract. • Include Additional Details That Are Not Already Requested Based On The Constraints Of The Information Request. • Provide Relevant Details Of The Same Or Similar Service Offered Or Made To The Government Entities In The Last Three (3) Years. Relevant Details To Dodea’s Proposed Acquisition Should Include, But Not Be Limited To: o Information Regarding The Size And Length Of The Effort; o Ability To Perform As A Prime Or Subcontractor; o Customary Practices (warranty, Financing, Discounts, Contract Types, Etc.) Under Which The Sale Of The Service(s) Is Made; o Any Security Details; the Responder Is Invited To Provide Information And Recommendations For Fashioning This Proposed Acquisition. Recommendation Areas May Include: • Information Regarding Performance Requirements - What To Evaluate, How To Evaluate, And The Performance Standards With Acceptable Quality Levels That Are Similar To Those Utilized In Similar Efforts. • What Is A Recommended Type Of Contract For This Type Of Service Broken Out By Clin (e.g. Ffp, Fpif Cpif)? • Anticipated Contract Terms & Conditions, Incentives, Variations In Delivery Schedule, Price And/or Cost Proposal Support • Evaluation Criteria submission Details: interested Parties Are Directed To Respond To This Rfi With A White Paper In Microsoft Word For Office Or Compatible Format And Shall Not Exceed 25 Pages. Pages Shall Have A One (1) Inch Margin On All Sides. Font Type Shall Be Times New Roman 12 Point And Include The Following: 1) Company Information (name, Physical/mailing Address, Unique Entity It, Cage Code, Phone No., Website Address); 2) Company Point Of Contact (name Of Primary/alternate Pocs, Title, E-mail, Phone No.); 3) Description Of Principle Business Activity; 4) Naics Recommendation For This Procurement; 5) Business Size And Status; 6) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated To Deliver Technical Capability, Address The Administrative And Management Structure Of Such Arrangements And Response To The Questions Above. vendors Who Wish To Respond To This Sources Sought Should Send Responses Via Email Nlt 1:00 Pm Eastern Standard Time (est) January 13, 2025 To Ms. Emani Gray At Emani.gray@dodea.edu. Interested Vendors Should Submit A Response That Demonstrates The Ability To Meet The Requirement As Listed In The Requirement Description Paragraph Above. disclaimer: this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. proprietary Information And Trade Secrets, If Any, Must Be Clearly Marked On All Materials. All Information Received That Is Marked Proprietary Will Be Handled Accordingly. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned.all Government And Contractor Personal Reviewing Responses Will Have Signed Non- Disclosure Agreements And Understand Their Responsibility For Proper Use And Protection From Unauthorized Disclosure Of Proprietary Information As Described 41 Usc 423. The Government Shall Not Be Held Liable For Any Damages Incurred If Proprietary Information Is Not Properly Identified.

Details: This Advertisement Is Hereby Incorporated Into The Rlp 24-reg02 By Way Of Reference As An Rlp Attachment. u.s. Government Seeks To Lease The Following Office Space Through The Automated Advanced Acquisition Program (aaap): city: Mountainside state: New Jersey delineated Area: north: Fairmount Ave To Route 124 To John F Kennedy Parkway To Route 510 east: Route 510 To Garden State Parkway To Elizabeth River To Route 439/elmora Ave south: Route 439/elmora Ave To Westfield Ave To North Ave west: North Ave To Mountain Ave To Us Highway 22 To Union Ave To New Providence Road/diamond Hill Road/union Ave To Springfield Ave To Central Ave To Fairmount Ave minimum Aboa Square Feet: 11,150 maximum Aboa Square Feet: 11,373 space Type: Office And Specialized Space lease Term: 17 Years, 15 Firm parking Requirement: 13 Reserved Spaces offerors Are Encouraged To Submit Rates For All Terms Available In The Aaap For Consideration Against Future Gsa Requirements. amortization Term: 8 Years For Both Tenant Improvementsand Building Specific Amortized Capital. agency Unique Requirements agency Tenant Improvement Allowance: existing Leased Space: $66.04 Per Aboa Sf other Locations Offered: $66.04 Per Aboa Sf building Specific Amortized Capital (bsac): existing Leased Space: $12.00 Per Aboa Sf other Locations Offered: $12.00 Per Aboa Sf other Unique Requirements: the Government Requires 24/7 Access To The Premises And Its Appurtenant Areas the Building Must Be At Least 1,000 Feet Away From Schools, Daycares And Parks. the Building Must Be Located Within A Walkable Half Mile Of Mass Transit Stops. the Tenant Requires A Secured Path Of Travel To Transport Detainees Into The Building. Access To A Non-public Elevator, Such As A Freight Elevator, Is Preferred, For This Purpose the Offered Space Is To Be Contiguous On One Floor, Located On Or Above The 2nd Floor. The Space Must De Demised Into Three Suites Within Their Own Separate Entrances. Demising Walls May Require Slab-to-slab Construction. if All Office Space Cannot Be Contiguous On One Floor: a Contiguous Block Of Space Of At Least 3,000 Aboa Sf Must Be Located On Or Above The 2nd Floor. a Contiguous Block Of Space Of At Least 4,800 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. a Contiguous Block Of Space Of At Least 3,350 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. thirteen (13) Reserved Spaces For Official Government Vehicles. In Addition, The Lessor Shall Provide A Pro-rata Share Of Parking Spaces As Required By The Applicable Code Of The Local Government Entity Having Jurisdiction Over The Property. structured Parking Preferred But Not Mandatory. the Governmentrequires A Standard Server Rack In A Secured Room Or Areawith Proper Ventilation And Dedicated Electrical Services For The Agency's Server Equipment. the Government Is Assigned A Facility Security Requirements Level Ii. Refer To The Aaap Website Published Rlp Attachment Titled "facility Security Requirements - Level Ii" For More Detail. important Notes check The Attachments And Links Section Of This Notice For Possible, Additional Project-specific Requirements Or Modifications To The Rlp. offerors Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By Federal Acquisition Regulation (far). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b offerors Are Advised That All Shell Work Associated With Delivering The Tenant Improvements Are At The Lessor’s Cost. Please Refer To Section 3(construction Standards And Shell Components)and Specifically To Paragraph 3.07(building Shell Requirements)of Theaaap Rlp Attachment #2 Titled "lease Contract" (gsaform L100_aaap ) For More Detail. Tenant Improvement Components Are Detailed Under Section 5 Of The Aaap Rlp Attachment#2 Titled "lease Contract" (gsaform L100_aaap) . it Is Highly Recommended That Offerors Start The Sam Registration Process Directly Following The Offer Submission. Refer To Rlp Clause 3.06. (if Applicable) The Government Intends To Award A Lease To An Offeror Of A Building That Is In Compliance With Seismic Standards. Section 2.03 Of The Request For Lease Proposals (rlp) Outlines Compliance Activities Required For All Leases In Moderate Or High Seismic Zones. To Determine If Your Property Lies In A Moderate Or High Zone, Please Reference The Map And Documents On Our Website. how To Offer the Automated Advanced Acquisition Program (aaap), Located At Https://leasing.gsa.gov/, Will Enable Interested Parties To Offer Space For Lease To The Federal Government In Response To The Fy24 Aaap Rlp. In Addition, The Government Will Use Its Aaap To Satisfy The Above Space Requirement. offerors Must Go To The Aaap Website, Select The “register To Offer Space” Link And Follow The Instructions To Register. Instructional Guides And Video Tutorials Are Offered On The Aaap Homepage And In The “help” Tab On The Aaap Website. Once Registered, Interested Parties May Enter Offers During Any “open Period”. For Technical Assistance With Aaap, Email Lop.help@gsa.gov. the Open Period Is The 1st Through The 7th Of Each Month, Ending At 7:30 P.m. (et) Unless Otherwise Stated By The Government And Unless The 7th Falls On A Weekend Or Federal Holiday. If The 7th Falls On A Weekend Or Federal Holiday, The Open Period Will End At 7:30 Pm (et) On The Next Business Day. Refer To Aaap Rlp Paragraph 3.02 For More Details On The Offer Submission Process. The Government Reserves The Right To Allow For Multiple Open Periods Prior To Selecting An Offer For Award To Meet This Specific Space Requirement. Offers Cannot Be Submitted During The Closed Period And Will Not Be Considered For Projects Executed During That Time Period. lease Award Will Be Made To The Lowest Price, Technically Acceptable Offer, Without Negotiations, Based Upon The Requirements In This Advertisement And In The Rlp Requirements Package Found On The Aaap Website. During An Open Period, Offerors Will Be Permitted To Submit New Offers Or Modify Existing Offers. Offerors Can Draft An Offer At Any Time; However, You Can Only Submit An Offer During The Open Period. the Offered Space Must Comply With The Requirements In This Advertisement And The Rlp And Must Meet Federal Government, State, And Local Jurisdiction Requirements, Including Requirements For Fire And Life Safety, Security, Accessibility, Seismic, Energy, And Sustainability Standards In Accordance With The Terms Of The Lease. The Lease And All Documents That Constitute The Lease Package Can Be Found At Https://leasing.gsa.gov/leasing/s/aaap-portalhome. if You Have Previously Submitted An Offer In Fy 2023, The Aaap Application Has A Copy Feature Which Will Allow Existing Offers To Be Copied Over To The Fy 2024 Rlp In Order To Avoid Having To Re-enter All Of The Data Manually. Please Be Sure To Review Fy24 Aaap Rlp Package And Each Page Within The Aaap Application Prior To Submitting Your Offer As Some Of The Questions Have Changed. You Must Re-enter Your Space And Rates On The ‘space And Rates’ Tab In The Aaap. Your Previous Offered Space Will Not Be Copied.