Vehicle Tenders

Details: Page 1 Of page 1 Of page 1 Of page 1 Of this Is A Sources Sought Announcement Only this Is A Sources Sought Notice Only And It Is Not A Solicitation Announcement. The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Sources Capable Of Providing The Services Described Below And Their Socio-economic Size Classification In Accordance With Naics Code 621910 (ambulance Service). Responses Will Be Used By The Government To Make Appropriate Acquisition Decisions. After A Review Of The Responses To This Sources Sought Notice, A Solicitation Announcement May Be Posted. A Response To This Sources Sought Notice Is Not An Adequate Reply To A Potentially Forthcoming Solicitation. the Department Of Veterans Affairs, (nco 08), Bay Pines Va Healthcare System (vahcs) Has A Need For Non-emergency Ambulance Transportation Service. We Are Seeking Authorized Service-disabled Veteran Owned Small Business (sdvosb S), Veteran Owned Small Business (vosb S), Small Business (sb S) Or Large Business (lb S) That Can Provide All Services. the Contractor Shall Provide All Vehicles, Personnel, Management, Supplies, Equipment, And Necessary Reporting For The Provision Of Stretcher Transports, Basic Life Support (bls), Advanced Life Support (als), Critical Care Transport (cct) Services. The Contactor Shall Make These Ambulance Services Available To The Va As Needed, 24 Hours A Day, Seven Days A Week (24/7), Including Weekends And Holidays. background: The Bay Pines Va Healthcare System (vahcs) Main Campus Is Located At 10000 Bay Pines Blvd Bay Pines, Fl 33744, Serving Over 1000,00 Veterans, Primarily From The Tampa Bay/ St Petersburg Area And It S 8 Community-based Outpatient Clinics. The Hospital Has 400 Inpatient Beds And Sees Approximately 10,000 Inpatient Admissions And 997,360 Outpatient Visits A Year. Veterans Served Within This Facility Lives Within The Following Counties And Zip Codes. county/zip Code county/zip Code county/zip Code county/zip Code county/zip Code pinellas/33701 pinellas/33702 pinellas/33703 pinellas/33706 pinellas/33707 pinellas/33708 pinellas/33711 pinellas/33715 pinellas/33760 pinellas/33761 pinellas/33762 pinellas/33764 pinellas/33767 pinellas/33771 pinellas/33772 pinellas/33774 pinellas/33777 pinellas/33778 pinellas/33785 pinellas/33786 pinellas/34684 pinellas/34689 pinellas/34691 pinellas/34695 pinellas/34698 hernando pasco polk hillsborough manatee sarasota hardee de Soto charlotte highlands scope/requirements types Of Ambulance Service: the Contractor Shall Provide Emergent, Non-emergent Stretcher Transports, Basic Life Support (bls), Advanced Life Support (als), And Critical Care Transport (cct) Tier 1, 2, And 3 Ambulance Services On An As-needed Basis In Accordance With All Federal, State, And Local Regulations. occasionally A Veteran Will Need To Be Transported With Va Staff And Equipment; The Contractor Shall Return Va Staff And Equipment To The Original Place Of Pick-up. documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. Offeror S Response To This Notice Shall Include The Following Information: (a) Company Name (b) Address (c) Point Of Contact (d) Phone, Fax, And Email (e) Unique Entity Id (f) Cage Code (g) Tax Id Number (h) Type Of Business, E.g. Small Or Other, As Appropriate And (i) Must Provide A Capability Statement That Addresses The Organization S Qualifications And Ability To Perform The Specific Operational Requirement Listed Above. no Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought And No Contract Will Be Directly Awarded On The Basis Of This Sources Sought. Any Information Submitted By Respondents To This Sources Sought Shall Be Voluntary. to Respond To This Source Sought Notice, Please Email The Information Requested To Lakiesha Anderson, Contracting Officer, At Lakiesha.anderson@va.gov. Please Reference 36c24825q0207- Bay Pines Ground Ambulance Service In The Subject Of The Email. Facsimile Response Will Not Be Accepted. Responses To This Sources Sought Notice Are Not Considered Adequate To The Solicitation Announcement. All Interested Offerors Will Have To Respond To The Solicitation Announcement In Additional To Responding To This Sources Sought Notice. The Closing Date And Time Of This Sources Sought Notice Is 3 January 2025 At 4:30 Pm Eastern Time.

Details: Description Mindanao State University Reference Nos. 2508-24 / 12-06-24 Fatima, General Santos City Project Name: Location: Request For Quotation __________________________ Company Name Date : December 26, 2024 __________________________ Quotation No. : 2466-24 Address Please Quote Your Best Proposal For Item/s Listed Below, Subject To The Terms And Conditions Duly Signed By Your Representative. Terms And Conditions: 1. Mayor's/business Permit 2. Philgeps Registration Certificate 3. Supplier/bidder Previously Submitted Documentary Requirements May Not Submit. 4. All Entries Shall Be Typed Or Written In A Clear Legible Manner 5. No Alternate Quotation/offer Is Allowed, Suppliers Who Submitted More Than One Quotation Shall Be Automatically Disqualified. 6. All Prices Offered Herein Are Valid, Binding And Effective For Thirty (30) Calendar Days Upon Issuance Of This Document. Alternate Bids Shall Be Rejected. 7. Delivery Period Within Fifteen (15) Calendar Days 8. Price Validity Shall Be For Period Of Thirty (30) Calendar Days. 9.. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered. 10. In Case Suppliers Pro Forma Quotation Is Submitted, Conditions Will Be Governed By The Submitted Signed Terms Of Reference/technical Specifications. 11. Partial Bid Is Allowed, Evaluation, Comparison And Contract Award Shall Be Made Per Item; Partial Bid Is Not Allowed; The Goods Are Grouped In A Single Lot, Evaluation, Comparison, And Contract Award Shall Be Made Per Lot Very Truly Yours, Randy P. Asturias, D'eng. Bac Chairman Item Qty Abc Technical Specifications Unit Price Total Amount (to Be Filled Up By The Suppliers) Unit Unit Price Total Amount 1 1 Camera (1-inch Cmos Sensor That Puts Detail-rich Imaging Right In The Palm Of Your Hand. With A 2-inch Rotatable Touchscreen And Full-pixel Fast Focusing, Go Horizontal Or Vertical For More Precise Awareness And Control. 4k/120fps, Three-axis Mechanical Stabilization, And A Host Of Intelligent Features Make Pocket 3 Ready For Any Moving Moment. 139.7×42.2×33.5 Mm (l×w×h), Weight 179 G, Size: 2.0 Inches, Resolution: 314×556 Brightness: 700 Nits, And Microsd (up To 512 Gb)) Unit 2 2 Digital Camera (sensor: 24.2 Mp Aps-c Cmos Sensor. Processor: Digic X For Enhanced Image Quality And Performance. Units Iso Range: 100–32,000 (expandable To 51,200). Autofocus: Dual Pixel Cmos Af With Subject Detection For People, Animals, And Vehicles. Continuous Shooting Speed: Up To 15 Fps With A Mechanical Shutter And 23 Fps With An Electronic Shutter. Image Stabilization: Digital Is For Video, Combined With Lens-based Stabilization. Video Recording: 4k Uhd At Up To 60 Fps, Full Hd 1080p At Up To 120 Fps, And Hdr Pq Support For 10-bit Color Depth. 3 3 Tripod (low-to-the-ground 6″ Minimum Height Units 6.6 Lb Payload, 65″ Max Height Converts Into 64″ Monopod, Fluid Damping System Independent Pan And Tilt Locks, Spring-loaded Counterbalance Includes Quick Release Plate And Pan Bar, Bubble Levels) ***nothing Follows*** Various Capital Outlay For The Conduct Of The Ched-lakas Special Project Entitled, "social And Cultural Considerations In Designing Clinical Simulations For Patients From Underrepresented Communities" - Com Total Abc ₱285,000.00 Total Amount Instructions: See Attached Specifications/important Instructions For Items. (please Provide Complete Information Below) Delivery Period : Warranty: Price Validity : We Undertake, If Our Proposal Is Accepted, To Supply/deliver The Goods In Accordance With The Specification And/or Delivery Schedule Unit Purchase/job Order Or A Contract Is Prepared And Executed, This Quotation/proposal Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Proposal You May Receive. After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. _______________________________ Signature Over Printed Name Of Bidder Tel. No. / Cellphone No.: __________ __________________________________ E-mail Address: Signature Over Printed Name Of Canvasser Abu

Details: Sources Sought Response Form ellsworth Afb B-21 West Alert Apron Epss sources Sought Notice # W9128f25sm007 anticipated Solicitation # W9128f25r0033 purpose: By Way Of This Sources Sought Notice, The Usace-omaha District Intends To Determine The Extent Of Capable Small Business Or Other Than Small Business Firms That Are Engaged In Providing The Requirement Described Hereunder. The Responses To This Notice Will Be Used For Planning Purposes For Upcoming Procurements. Therefore, This Notice Does Not Constitute A Request For Proposal (rfp), Quotation Or Bid; It Does Not Guarantee The Future Issue Of An Rfq/rfp/ifb; Nor Does It Commit The Government To Contract For Any Supply, Service, Or Construction. There Is No Solicitation Currently Available. further, This Agency Will Not Accept Unsolicited Proposals. Respondents Are Advised That This Agency Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. At This Time, Proprietary Information Is Not Being Requested, And Respondents Shall Refrain From Providing Proprietary Information In Response To This Sources Sought Notice. project Description: this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). this Project Will Provide Seven (7) New Pre-engineered Metal Environmental Protection Shelters (epss), Approximately 20,000 Sf Each. This Project Is Located Directly Adjacent To And Required To Coordinate With The Fy25 East Alert Apron Eps Project, With Target Award In Fy25. epss Are Sized To Fit The B-2a “spirit” Aircraft With Space To Perform General Aircraft Maintenance. The Project Also Includes Associated Airfield And Ground Support Equipment (gse) Paving. Supporting Facilities Include Two (2) Maintenance Kiosks, Approximately 160 Sf Each, Providing Electrical And Communication Infrastructure To The Epss. Additional Site Features Include Blast Deflectors, Pl-3 Boundary Fencing And Lighting, And An Entry Control Point (ecp). This Project Will Include A Space Or Spaces Constructed To Afi 16-1404 Requirements. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. This Project Will Comply With Dod Antiterrorism/force Protection Requirements Per Unified Facilities Criteria. special Construction And Functional Requirements: The Project Will Be Constructed On / Near The Existing Alert Apron At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Facilities, Utilities, And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. New Airfield Apron Will Be Designed In Compliance With Ufc 3-260-02 And Will Be Constructed In Compliance With Ufgs 32 13 14.13. small Businesses Are Reminded Under Far 52.219-14(c) (1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. (for Construction): Project Period Of Performance: 800 Calendar Days From Construction Ntp. responses: Please Respond To All Information Requested In This Notice Not Later Than 2:00 Pm Cst 03-jan-2025. Please Include The Sources Sought Notice Identification Number In The Subject Line Of The Email Submission With Attention To: James.r.willett@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil. required Information To Be Submitted In Response To This Notice: company Name, Address, Phone Number, Point Of Contract, Email, Web Address: cage Code And Unique Entity Identifier (uei): north American Industry Classification System Code (naics): state Whether Your Firm Is Classified By The Small Business Administration As Any Of The Following: small Business small Disadvantaged Business service-disabled Veteran Owned Small Business (sdvosb) section 8(a) women Owned Small Business (wosb) hubzone historically Black Colleges And Universities/minority Institutions none Of The Above is Your Company Currently Registered In System For Award Management (sam)? has Your Company Performed Work For The Federal Government Under A Different Name Or Uei/duns #, Or As A Member Of A Joint Venture (jv)? If Yes, Provide An Explanation: capabilities And Submission Requirements: submission Details: all Interested, Capable, Qualified, And Responsive Contractors Under Naics Code 236220 Are Encouraged To Reply To This Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature As Described In The Project Description. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $50m. Narratives Shall Be No Longer Than 12 Pages. Email Responses Are Required. please Include The Following Information In Your Response/narrative: •company Name, Address, And Point Of Contact, With Phone Number And Email Address •cage Code And Duns/eid Number •business Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture •details Of Similar Projects And State Whether You Were The Prime Or Subcontractor •start And End Dates Of Construction Work •project References (including Owner With Phone Number And Email Address) •project Cost, Term, And Complexity Of Job •information On Your Bonding Capability - Specifically Identify Capacity Of Performance And Payment Bonds in Accordance With Dfars 236.204, The Magnitude Of This Project Is Expected To Range Between $25m And $100m. details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years: •construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) •construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. •construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. •construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. •construction Of Aircraft Blast Deflectors Or Equivalent Feature. •construction Of Facilities On A Dod Military Installation. •construction Of Facilities On An Active Airfield Flightline. •construction Of Facilities With Shared Access, Laydown, And Limits Of Work To Adjacent Projects Awarded Under Separate Contract. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. project Labor Agreement: project Labor Agreements (plas) Are Currently Required For Large-scale Construction Projects, Unless An Exception Is Determined To Apply To The Project. Large-scale Construction Projects Are Defined As Construction Projects With Estimated Costs Expected To Exceed $35m. If An Exception Does Not Apply, A Pla Will Be Required From All Offerors With Submission Of Their Initial Proposal. The Pla Will Be Evaluated On An Acceptable/unacceptable Basis. Submitted Plas Will Be Reviewed For Compliance With All Statutes, Regulations, Executive Orders, And Agency/ Contract Requirements. Offerors Are Encouraged To Review 22.504, General Requirements For Project Labor Agreements. comments: provide Comments Or Identify Any Concerns Your Company Has Regarding The Planned Solicitation. Note That The Government Will Not Be Responding To Inquiries About The Proposed Solicitation At This Time. Your Responses And Comments Will Be Used By Government Personnel To Assess The Viability And Scope Of The Proposed Solicitation And Will Be Kept In Strictest Confidence. Telephone Inquiries Will Not Be Accepted. estimated Construction Contract Award Will Be Second Quarter Of Fiscal Year 2026 (fy26).

Description: Contact Information|4|n7m3.11|anc|7176055415|nicole.diehl@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26||||||||||||||||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|combo|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| contract Definitization (may 2023)|5|firm-fixed|fixed Price|90 Day|ffp|tbd| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (sep 2023)|4||||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| option For Increased Quantity (mar 1989)|1|365 Days| estimate Of Percentage Of Recovered Material Content For Epa Designated Items (may 2008))|1|| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334290|800|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Include The Applicable Clauses Due To The Increase In Qty Requirements. No Other Changes Are Made At This Time. the Purpose Of This Amendment Is To Increase The Requirement Qty To 15. No Other Changes Are Made At This Time. the Purpose Of This Amendment Is To Reopen The Solicitation Window Through 06 Nov 2024. No Other Changes Are Made At This Time. this Solicitation Is Issued Pursuant To Emergency Acquisition Authority (eaa). Accelerated And Partial Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractors Written Acceptance Prior To Execution.. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: ________ government Source Inspection (gsi) Is Required. please Note Freight Is Handled By The Navy As Per The Commercial Asset Visibility (cav) Statement Of Work. your Quote Should Include The Following Information: Quote Amount And Rtat Unit Price:__________ Total Price:__________ Repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractors Facility As Reflected In The Aaction Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Check One: Firm-fixed-price ___ Estimated ___ Not-to Exceed (nte): ___ Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location Awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As "awardee Cage": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As "awardee Cage":__________ Iot Compare Repair Price To Price To Buy New New Unit Price:__________ New Unit Delivery Lead-time:__________ all Pricing Is Firm. Please Consider The Following When Providing Price: include Repair Price With All Costs Associated With Receipt And Complete Repair Of Material That May Be In Unwhole Condition, Missing Hardware, Damaged, Handling Damage, Missing Parts And Wear Damage. the Government Intends To Add An Option Quantity To The Resultant Contract. In Reference To The Option Quantity, The Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Officer May Exercise The option By Written Notice To The Contractor Within The Number Of Days In Far 52.217-6 Herein. Delivery Of The Added Items Shall Continue At The Same Rate As The Like Items Called For Under The Contract, Unless The Parties Otherwise Agree. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Module,matrix,switc . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Module,matrix,switc Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;03538 77a126678p10; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 ;000-711866-02 Is Oem Internal Pn Id To Be Used For Reference Only. Design Specifications For The Configuration Must Adhere To Reference 77a126678p10.; 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Description: Contact Information|4|n713.31|hrb|(717)605-3576|lily.f.ritter.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American --free Trade Agreements--balance Of Payments Program - Basic (nov2023))|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (nov 2023))|5|||||| buy American-balance Of Payments Program Certificate-basic (nov 2014)|1|| annual Representations And Certifications (mar 2023)|13|335312|1250 Emp|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Allow Additional Time For Quotations To Besubmitted In Accordance With Solicitation N00104-24-q-lb62. the Open Period For Quotes Has Been Extended To 10 Jan 25. the Requested Repair Turnaround Time Has Been Changed From 120 Days To 135 Days. all Other Terms And Conditions Of The Solicitation Shall Remain Unchanged. \ Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractors Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: 120 Days government Source Inspection (gsi) Is Required. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. your Quote Should Include The Following Information: Quote Amount And Rtat unit Price:__________ Check One: Firm-fixed-price ___ Estimated ___ Nte ___ total Price:__________ repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractors Facility As Reflected In The Aaction Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As ""awardee Cage"": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As "awardee Cage":__________ Iot Compare Repair Price To Price To Buy New New Unit Price:__________ New Unit Delivery Lead-time:__________ response Required Important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If A Price Reduction Is Required Due To Unexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A ""reconciliation Modification"" At The End Of The Contract Performance. Price Reductions Made pursuant To This Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. the Government Intends To Add An Option Quantity To The Resultant Contract. In Reference To The Option Quantity, The Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Officer May Exercise The option By Written Notice To The Contractor Within The Number Of Days In Far 52.217-6 Herein. Delivery Of The Added Items Shall Continue At The Same Rate As The Like Items Called For Under The Contract, Unless The Parties Otherwise Agree. option Remarks: the Contract Officer Would Like To Exercise A 100% Option Quantity Within365-days Of The Effective Date Of The Contract Award. The Contractor Willprovide The Same Delivery Turnaround As The Base Line Items. A Modificationwill Be Completed At The Time The Option Is Exercised And All Current Contract Terms And Conditions Will Apply To The Option Quantity. please Indicate If The Contracting Officer May Exercise The 100% Optionquantity For The Procurement Contract. yes ___ Or No ____ please Indicate The Pricing For The Option Quantity. price Each: $___________ \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Motor,alternating C . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Motor,alternating C Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;53555 603511-179; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Description: Contact Information|4|n711.9|bur|7176054385|derek.j.ford5.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412 |750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| the Purpose Of This Amendment Is To Close The Solicitation As A Quote From The Sole Source Contractor Was Already Obtained. all Other Terms And Conditions Remain The Same. \ a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Derek.j.ford5.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repairof The Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Repair Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: ## ______ Days After Receipt Of Asset. Repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The fifth Regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Each Nsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Month Reflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result Ina Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made pursuant To This Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Followingprice Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Currentboa/idiq, For Example) Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;53711 7628741 1tws1 Bc-635pmc 1tws1 Bc12073-1 ; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: The Savannah District, U.s. Army Corps Of Engineers (usace) Is Soliciting Lease Proposals For Approximately 1,700-2,100 Gross Rentable Square Feet Of Commercial Retail Space In Loganville, Georgia, For Armed Forces Recruiting Purposes. The Delineated Area Is The 30052 Zip Code. the U.s. Government, By And Through Usace, Seeks To Occupy Retail And Related Space Under A Lease, That Will Be Expiring,in The City And State Specified Above. In Making This Determination, The Government Will Consider, Among Other Factors, The Availability Of Space That May Potentially Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Such As Tenant Improvements (initial Alterations) And Telecommunication Infrastructure, Non-productive Agency Downtime, And Costs, Including Rent, Related To Executing A Lease And Occupying A Space. the Government’s Preference Is For A Full-service Lease To Include Base Rent, Cam, Utilities, And Janitorial Services For Retail Space To Be Used For Armed Forces Recruiting Purposes For A Term Of Five (5) Years With Government Termination Rights And Location Within The Delineated Area Specified Above. Non-exclusive Parking For 4 Government Vehicles Must Be Provided 24 Hours 7 Days. Offered Space Must Meet Government Requirements Per The Terms Of The Government Lease. Must Use Government Lease. the Lease Is For A Five (5) Year Term With Government Termination Rights Interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Due To The Number Of Responses, Representatives Of Building Owners Must Include The Exclusivity Agreement Granting The Right To Represent The Building Owner With Any Response To This Advertisement.if You Are Not The Lessor And Do Not Have An Exclusivity Agreement Dated Prior To The Date Of This Announcement Please Do Not Submit Responses Or Questions Related To This Advertisement. **additional Information Regarding This Solicitation Will Be Provided By The Primary And Secondary Contacts Contained In This Solicitation. ***attached Documents Include: Proposal To Lease General Clauses And Addendum Government Lease **** Documents Available Upon Request Construction Specifications For Initial Alterations Telecommunications Addendum (national Defense Authorization Act Compliance) Janitorial Specifications *****solicitation For Offer (sfo) Submission Must Include: Proposal To Lease Space Document (signed By Lessor), Proposed Floor Plan, Initial Alterations Quote, And Exclusivity Agreement (if Applicable) notice: The Following Information Is Provided For Situational Awareness And Is Not Required To Respond To This Sources Sought. All Contractors Must Be Registered In The System For Award Management (www.sam.gov) Prior To Award Of A Contract. All Proposed Contractors Are Highly Encouraged To Review Far Clause 52.232-33 Payments By Electronic Funds Transfer – System For Award Management, Which Indicates “all Payments By The Government Under This Contract Shall Be Made By Electronic Funds Transfer (eft).” Those Not Currently Registered Can Obtain Registration By Going To The Website Http://www.sam.gov. The Process Can Usually Be Completed From 24 To 48 Hours After Submission. Contractors Will Need To Obtain A Unique Entity Identifier (formerly Duns Number) For Processing Their Registration. If You Do Not Already Have A Unique Entity Identifier, One Can Be Obtained From Http://www.sam.gov. Refer To Www.sam.gov For Information Formerly Found In Ccr, Epls, Orca And Fedreg. Please Begin The Registration Process Immediately In Order To Avoid Delay Of The Contract Award Should Your Firm Be Selected. alert: You Must Submit A Notarized Letter Appointing The Authorized Entity Administrator Before Your Registration Will Be Activated. This Requirement Now Applies To Both New And Existing Entities. Effective 29 April 2018, The Notarized Letter Process Is Now Mandatory On All Current Registrants At Sam Who Have A Requirement To Update Data On Their Sam Record. The Notarized Letter Is Mandatory And Is Required Before The Gsa Federal Service Desk (fsd) Will Activate The Entity's Registration. Effective 29 June 2018, Vendors Creating Or Updating Their Registration Can Have Their Registration Activated Prior To The Approval Of The Required Notarized Letter. However, The Signed Copy Of The Notarized Letter Must Be Sent To The Gsa Federal Service Desk (fsd) Within 30 Days Of Activation, Or The Vendor Risks No Longer Being Active In Sam. Vendors Can Check Whether An Account Is Active By Performing A Query By Their Cage Or Unique Entity Identifier (known As Duns). The New Registration Process May Now Take Several Weeks, So Vendors Are Highly Encouraged To Begin Registering As Soon As Possible To Avoid Any Possible Delays In Future Contract Awards. Remember, There Is No Cost To Use Sam. To Find Out Additional Information About The Changes Of The Sam Registration Process, Contractors Should Visit The Frequently Asked Questions (faq) Link Located At The Top Of The Sam Homepage (www.sam.gov).

Description: Contact Information|4|n711.13|aad|717-605-2462|rachael.l.costanzo.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo|n/a|to Be Determined (tbd)|n00104|tbd|tbd|w25g1u|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|335313|1,250 Emp|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| subject Amendment Is Hereby Incorporated To Extend The Closing Date To 10 Jan 2025. All Other Terms And Conditions Remain Unchanged. Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Rachael.l.costanzo.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection Required. c. All Freight Is Fob Origin. d. This Rfq Is For A Buy/procurement. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. Your Quote Should Include The Following Information For Justification Purposes: - New Procurement Unit Price____________________ - Total Price _____________________ - Procurement Delivery Lead Time (ptat) _________________ Days - Award To Cage _______________ - Inspection & Acceptance Cage, If Not At Award To Cage _____________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________ (90 Days Minimum Is Requested). - Delivery Vehicle (if Delivery Order Requested)(e.g. If Your Cage Has A Current Boa/idiq) h. Important Traceability Notice: if You Are Not The Manufacturer Of The Material You Are Offering, You Must Provide An Official Letter And/or Email From The Oem Confirming That Your Company Is An Authorized Distributor Of Their Items. evaluation Factors: evaluation Utilizing Simplified Acquisition Procedures the Government Will Issue An Order Resulting From This Request For Quotation To The Responsible Offeror Whose Quotation Results In The Best Value To The Government,considering Both Price And A Non-price Factors. The Following Factors Will Be Used To Evaluate quotations: 1) Price. 2) Past Performance. The Offeror's Past Performance On Related Contracts Will Be Evaluated To Determine, As Appropriate, Successful Performance Of Contract Requirements, Quality And Timeliness Of Delivery Of Goods And Services, Cost Management, Communications between Contracting Parties, Proactive Management, And Customer Satisfaction. 3) Supplier Performance Risk As Described In Dfars 252.204-7024. (end Of Provision) quotes Shall Be Received No Later Than The Date Specified In The Solicitation In Order To Be Considered. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Switch Assembly . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Switch Assembly Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;94756 27290-514-1; 3.2 ;authorized Distributors For Siemens Must Obtain Items From Siemens; 3.3 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.4 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.5 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Description Technical Specifications 1. Project Title Fuel And Gasoline Expenses 2. Total Budget The Total Budget For The Project Amounts To Php 319,400.00. Said Budget Is Included In The Corporate Budget For Cy 2025. 3. Brief Discussion Why The Goods And Services To Be Procured Are Necessary Provision Of Fuel For The Generator Set And To All Official Vehicles Of Gsis General Santos Branch. 4. Scope Of The Project The Service Provider Shall Allow The Gsis General Santos Branch Office To Withdraw Fuel As Needed Subject To The Submission/presentation By Gsis Authorized Personnel Of A Duly Accomplished Authority To Withdraw Gasoline And Purchase Order (po) Indicating The Validity Date Thereof. 5. Detailed Specifications Of The Items, Materials, Equipment/hardware/software, Accessories And/or Services To Be Procured Not Applicable 6. Manpower Requirements The Supplier Must Assign A Point Person Who Will Handle/facilitate The Requests For The Supply And Delivery Of The Goods. Contact Details Of This Point Person Must Be Given To The Office Of The Branch Manager (obm) Upon Commencement Of The Project. 7. Support Service Requirements “not Applicable In This Project” 8. Warranty And After-sales Service Requirements “not Applicable In This Project” 9. Clear Statement Of The Required Standards Of Workmanship, Materials And Performance Of The Goods And Services To Be Procured “not Applicable In This Project” 10. Brand And Specifications Of The Existing Items, Materials, Equipment/hardware/software And Accessories, If The Former Are Related To The Goods And Services To Be Procured “not Applicable In This Project” 11. Drawings/plans And Other Necessary Information “not Applicable In This Project” 12. Schedule And Place Of Delivery “not Applicable In This Project” 13. Terms Of Payment The Above-mentioned Services Shall Be Paid Fifteen (15) Days After Receipt Of The Monthly Billing From The Vendor/supplier. The Services Rendered Must Be Duly Found To Be Satisfactory (in Accordance With The Agreement Between The Gsis And The Vendor / Supplier) As Indicated In The Inspection And Acceptance Report. All Payments Shall Be Subject To Existing Accounting And Auditing Rules And Regulations Applicable To The Gsis. 14. Responsibilities Of The End-user Unit During Project Implementation The Assigned Personnel In-charge Of Gsis Gsc Branch Shall Prepare Authority To Withdraw Gasoline. 15. Penalty For Delay When The Winning Bidder Fails To Satisfactorily Deliver Goods Under The Contract Within The Specified Delivery Schedule, Inclusive Of Duly Granted Time Extensions, If Any, The Supplier Shall Be Liable For Damages For The Delay And Shall Pay Gsis Liquidated Damages, Not By Way Of Penalty, An Amount Equal To One-tenth (1/10) Of One Percent (1%) Of The Cost Of The Delayed Goods Scheduled For Delivery For Every Day Of Delay Until Such Goods Are Finally Delivered And Accepted By Gsis. Gsis Need Not Prove That It Has Incurred Actual Damages To Be Entitled To Liquidate Damages. Such Amount Shall Be Deducted From Any Money Due Or Which May Become Due To The Supplier, Or Collected From Any Securities Or Warranties Posted By The Supplier, Whichever Is Convenient To The Procuring Entity Concerned. In No Case Shall The Total Sum Of Liquidated Damages Exceed Ten Percent (10%) Of The Total Contract Price, In Which Event The Procuring Entity Concerned May Rescind The Contract And Impose Appropriate Sanctions Over And Above The Liquidated Damages To Be Paid. 16. Documentary Requirements The Supplier Must Comply With The Dbm Gppb Non-policy Matter No. 045-2017, If Applicable. “dbm Gppb Non-policy Matter No. 045-2017, "the Gppb Recently Approved Amendments (effective 5 December 2017) To The Documentary Requirements For Negotiated Procurement Under The Small Value Procurement Modality Per Appendix A, Annex “h” Of The 2016 Revised Irr. Thus, Income Or Business Tax Returns Shall Be Required For Procurement Projects With Approved Budget For The Contract (abc) Above ₱ 500,000.00 And The Omnibus Sworn Statement Shall Be Required Only For Procurement Projects With Abc Above ₱50,000.00.” The Above Mentioned Documentary Requirement Shall Be Submitted By The Winning Vendor Before The Issuance Of The Notice Of Award (noa) / Purchase Order (po) / Contract. 17. Data Privacy The Winning Bidder/supplier Must Comply With All The Provisions Of Republic Act No. 10173, Known As The “data Privacy Act Of 2012” And Its Implementing Rules And Regulations. Important Reminder The Government Service Insurance System (gsis) Warns The Public/bidders Of Unscrupulous Individuals And Groups Posing As Officers/employees Of The Gsis Soliciting Money For Alleged Aid For Whatever Purpose. Do Not Give Anything To These Unscrupulous Individuals And Groups. Gsis Is Fully Compliant With The No Solicitation And Gift Policy. In This Regard, Gsis Officials And Employees Are Prohibited From “directly Or Indirectly Soliciting Gifts, Favors Or Benefits From Stakeholders And Directly Or Indirectly Soliciting, Accepting Or Receiving Any Gift, Favor Or Benefits From Any Party Which May Influence The Performance Of Their Official Functions Or Which May Be Perceived As Influencing Their Past, Present And Future Official Functions. We Thus Enjoin The Cooperation Of The Public/vendors/suppliers To Report These Individuals/groups To Gsis Through The Office Of The Vice-president, General Services Office At (02) 7976-4900 Local 4971 And Materials Management Department (mmd) At (02) 7976- 4900 Local 3608.

Details: The Savannah District, U.s. Army Corps Of Engineers (usace) Is Soliciting Lease Proposals For Approximately 900-1,100 Gross Rentable Square Feet Of Commercial Retail Space In Canton, Georgia, For Armed Forces Recruiting Purposes. The Delineated Area Is The 30114 Zip Code. the U.s. Government, By And Through Usace, Seeks To Occupy Retail And Related Space Under A Lease, That Will Be Expiring,in The City And State Specified Above. In Making This Determination, The Government Will Consider, Among Other Factors, The Availability Of Space That May Potentially Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Such As Tenant Improvements (initial Alterations) And Telecommunication Infrastructure, Non-productive Agency Downtime, And Costs, Including Rent, Related To Executing A Lease And Occupying A Space. the Government’s Preference Is For A Full-service Lease To Include Base Rent, Cam, Utilities, And Janitorial Services For Retail Space To Be Used For Armed Forces Recruiting Purposes For A Term Of Five (5) Years With Government Termination Rights And Location Within The Delineated Area Specified Above. Non-exclusive Parking For 2 Government Vehicles Must Be Provided 24 Hours 7 Days. Offered Space Must Meet Government Requirements Per The Terms Of The Government Lease. Must Use Government Lease. the Lease Is For A Five (5) Year Term With Government Termination Rights Interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Due To The Number Of Responses, Representatives Of Building Owners Must Include The Exclusivity Agreement Granting The Right To Represent The Building Owner With Any Response To This Advertisement.if You Are Not The Lessor And Do Not Have An Exclusivity Agreement Dated Prior To The Date Of This Announcement Please Do Not Submit Responses Or Questions Related To This Advertisement. **additional Information Regarding This Solicitation Will Be Provided By The Primary And Secondary Contacts Contained In This Solicitation. ***attached Documents Include: Proposal To Lease General Clauses And Addendum Government Lease **** Documents Available Upon Request Construction Specifications For Initial Alterations Telecommunications Addendum (national Defense Authorization Act Compliance) Janitorial Specifications *****solicitation For Offer (sfo) Submission Must Include: Proposal To Lease Space Document (signed By Lessor), Proposed Floor Plan, Initial Alterations Quote, And Exclusivity Agreement (if Applicable) notice: The Following Information Is Provided For Situational Awareness And Is Not Required To Respond To This Sources Sought. All Contractors Must Be Registered In The System For Award Management (www.sam.gov) Prior To Award Of A Contract. All Proposed Contractors Are Highly Encouraged To Review Far Clause 52.232-33 Payments By Electronic Funds Transfer – System For Award Management, Which Indicates “all Payments By The Government Under This Contract Shall Be Made By Electronic Funds Transfer (eft).” Those Not Currently Registered Can Obtain Registration By Going To The Website Http://www.sam.gov. The Process Can Usually Be Completed From 24 To 48 Hours After Submission. Contractors Will Need To Obtain A Unique Entity Identifier (formerly Duns Number) For Processing Their Registration. If You Do Not Already Have A Unique Entity Identifier, One Can Be Obtained From Http://www.sam.gov. Refer To Www.sam.gov For Information Formerly Found In Ccr, Epls, Orca And Fedreg. Please Begin The Registration Process Immediately In Order To Avoid Delay Of The Contract Award Should Your Firm Be Selected. alert: You Must Submit A Notarized Letter Appointing The Authorized Entity Administrator Before Your Registration Will Be Activated. This Requirement Now Applies To Both New And Existing Entities. Effective 29 April 2018, The Notarized Letter Process Is Now Mandatory On All Current Registrants At Sam Who Have A Requirement To Update Data On Their Sam Record. The Notarized Letter Is Mandatory And Is Required Before The Gsa Federal Service Desk (fsd) Will Activate The Entity's Registration. Effective 29 June 2018, Vendors Creating Or Updating Their Registration Can Have Their Registration Activated Prior To The Approval Of The Required Notarized Letter. However, The Signed Copy Of The Notarized Letter Must Be Sent To The Gsa Federal Service Desk (fsd) Within 30 Days Of Activation, Or The Vendor Risks No Longer Being Active In Sam. Vendors Can Check Whether An Account Is Active By Performing A Query By Their Cage Or Unique Entity Identifier (known As Duns). The New Registration Process May Now Take Several Weeks, So Vendors Are Highly Encouraged To Begin Registering As Soon As Possible To Avoid Any Possible Delays In Future Contract Awards. Remember, There Is No Cost To Use Sam. To Find Out Additional Information About The Changes Of The Sam Registration Process, Contractors Should Visit The Frequently Asked Questions (faq) Link Located At The Top Of The Sam Homepage (www.sam.gov).